* copied mjt keymaps from archive
* All mjt boards now compile
* fixed jd45-mjt breathing
* Updates to fix SpaceFN but not tested yet.
* Still missing either spacebar or an adjacent keypress.
* Debugging rigged up for use with hid_listen.
* Reverted the default keymap to use tap_layer_key rather than custom. Moved custom approach to keymap_debug.c
* Fixed the lower-left side of the keymap, which needed more spacers due to the matrix being directly put into the array rather than using the keymap function.
* Cleaned up JD45 keymap that uses tapkey.
* Redid minivan keymap with numsym rather than raise/lower.
Untested.
* Created my MJT keymap for HHKB
Enabled dynamic macros and moved
somoe of the shortcuts around.
* Minor keymap fixes to make them compile without errors.
* Added home/end to right arrow cluster on DYN layer.
* Added more keys to fn and dyn layers.
* It wasn't using my custom layer last time somehow...? Now it will.
* Compiled and installed at end of day on 8/23
* Moved macros to FKEY layer because Adjust was too hard to get into and out of without some sort of feedback.
* Fixed volume controls... were reversed and disabled.
* Added F13-F15 back to fkeys layer in Minivan
* Created new Planck Keymap that uses the NumSym and FKeys layer approach like the Minivan.
* Removed DYN layer.
* Fixed diagram in planck numsym.
* Cleanup for pull request.
* Roadkit flip phone warning.
* Replaced PLAY_NOTES_ARRAY to PLAY_SONG
* reset the submodules
* checked out specific commits for submodules
* Removed debugging from JD45 shared config.h
* Moved custom rules.mk to apropriate keymap
Reset the shared rules.mk file.
* Trailing return issue in rules.mk
Gotta make for a smooth pull request :-)
* Mitosis music troubleshooting
Also updated the song playing function.
Does not work currently.
* Fixed mitosis audio
* Put mitosis/rules.mk back to QMK master
* copied mjt keymaps from archive
* All mjt boards now compile
* fixed jd45-mjt breathing
* Updates to fix SpaceFN but not tested yet.
* Still missing either spacebar or an adjacent keypress.
* Debugging rigged up for use with hid_listen.
* Reverted the default keymap to use tap_layer_key rather than custom. Moved custom approach to keymap_debug.c
* Fixed the lower-left side of the keymap, which needed more spacers due to the matrix being directly put into the array rather than using the keymap function.
* Cleaned up JD45 keymap that uses tapkey.
* Redid minivan keymap with numsym rather than raise/lower.
Untested.
* Created my MJT keymap for HHKB
Enabled dynamic macros and moved
somoe of the shortcuts around.
* Minor keymap fixes to make them compile without errors.
* Added home/end to right arrow cluster on DYN layer.
* Added more keys to fn and dyn layers.
* It wasn't using my custom layer last time somehow...? Now it will.
* Compiled and installed at end of day on 8/23
* Moved macros to FKEY layer because Adjust was too hard to get into and out of without some sort of feedback.
* Fixed volume controls... were reversed and disabled.
* Added F13-F15 back to fkeys layer in Minivan
* Created new Planck Keymap that uses the NumSym and FKeys layer approach like the Minivan.
* Removed DYN layer.
* Fixed diagram in planck numsym.
* Cleanup for pull request.
* Roadkit flip phone warning.
* Replaced PLAY_NOTES_ARRAY to PLAY_SONG
* reset the submodules
* checked out specific commits for submodules
* Removed debugging from JD45 shared config.h
* Moved custom rules.mk to apropriate keymap
Reset the shared rules.mk file.
* Trailing return issue in rules.mk
Gotta make for a smooth pull request :-)
* include variables and .h files as pp directives
* start layout compilation
* split ergodoxes up
* don't compile all layouts for everything
* might seg fault
* reset layouts variable
* actually reset layouts
* include rules.mk instead
* remove includes from rules.mk
* update variable setting
* load visualizer from path
* adds some more examples
* adds more layouts
* more boards added
* more boards added
* adds documentation for layouts
* use lowercase names for LAYOUT_
* add layout.json files for each layout
* add community folder, default keymaps for layouts
* touch-up default layouts
* touch-up layouts, some keyboard rules.mk
* update documentation for layouts
* fix up serial/i2c switches
Turns out that 3c and 3d are not reversed when splitting the right
shift in the way that the Mark I layout does. Reversing it here, rather
than in the generic satan.h to avoid breaking the other layouts.
Fix and issue with the original Sentraq S60-X not being compatible with 'default'. If 'default' shouldn't be changed, perhaps I can create an 'original' revision.
Updated MiniDox split_util.h and eeprom files to reflect this change.
I recommend adding this to any split board that used these files, my changes will not effect them currently.
[Colemak Mod-DH](https://colemakmods.github.io/mod-dh/) layout for
users keeping an `azerty` layout configuration on their OS.
The symbols layers was done after analysing various programming
languages sources codes and should be close to optimal for typing
confort.
The let's split code used delays in its debouncing algorithm which
increases input latency. This commit copies and adapts the code from
`quantum/matrix.c` to lets_split's `matrix.c`.
This protocol breaks out "duplicate" keys into their own entry in the packet so that more complicated logic can be done on the software side, including support for additional languages and alternative theories.
Requires virtser; Allows QMK to speak the TX BOlt protocol used by stenography machines and software (such as Plover). The upside is that Plover can be configured to listen only to TX Bolt allow the keyboard to switch layers without need to enable/disable the Plover software, or to have a second non-Steno keyboard work concurrently.
* merge
* line ending stuff
* Added MiniDox keyboard folder / configs / and some keymaps
* Updated minidox rev1 config, and readme. Also updated that_canadian keymap to include RGB
* cleaned up that_canadian keymap comments
* Fixed RGB being enabled by default, now it must be turned on at the keymap level
This is a setup that is very useful for me. It may or may not be for
you. I will use it in conjunction with the A5 overlayed sv_SE layout.
The layout is subject to change (in particular I'm thinking about adding
a macro recording feature), but it have not changed much the past year
or two so you can expect it to be stable enough to learn it.
A5: http://aoeu.info/s/dvorak/svorak
My xkb map: https://github.com/lindhe/dotfiles/blob/master/usr/share/X11/xkb/symbols/se-A5
The most major points:
======================
L0:
---
* Easily accessible F11 key for fullscreening
* Print screen
* Middle mouse button for X-paste
* Improved reachability of meta buttons (LCtrl, LALt, AltGr, LGui etc.)
* Cluster Page Up/Down + Home/End by the right thumb
* Vim-like arrow layout in right bottom row
* Set media layer toggle to right thumb (Enter)
* Set apostrophe on LCtl (putting it next to some other small
characters)
L1:
---
* Full function key layout
* Teensy button
L2:
---
* Improved media buttons layout (close by the jkl; Vim binding)
* Improved layout of emulated mouse buttons
LED behaviour to binary+CAPS
============================
The ErgoDox LEDs on this layout is using the two rightmost LEDs as the
two LSB in a two digit binary number, representing layer 0, 1, 2 and 3.
The leftmost byte/LED indicates CAPS status.
Instead of having all sendstring keycode mappings in the main quantum.c
file, give each one its own file in keymap_extras that can be #included
in a user's keymap. If one is included, it will define the appropriate
lookup tables and overwrite the weak definitions in quantum.c.
(Including more than one sendstring definition will fail at compile
time.)
Update @rai-suta's test keymap to match, as well as the documentation.
Refactor new-ish JIS_KEYCODE send_string implementation with existing
send_string
Reshuffle JIS in line with other alternative keycodes for sendstring,
and make them all accessible via compile-time options
Add a separate function to allow sending a string with a delay.
* Move Space Caded Parentheses to own layer
The space cadet parentheses where too much distracting. Therefore they are now on the function layer. I also added two more layers for also having angle brackets and curly braces on the shift keys forr better access.
Also updated the README
* Fixed SHIFT+Function key conflict
* Removed Angle Bracket and Curly Bracket layers, as they don't work corrrectly
*NOTE:* it might still be desirable to set the software layout to sv_SE in your
OS.
Swedish (sv_SE) Qwerty layout for ErgoDox, based on the Default configuration
I have tried making this as close of a match I could between the [default
ErgoDox EZ configuration](https://ergodox-ez.com/pages/our-firmware) and a
standard Swedish Qwerty layout.
Notable differences from default:
=================================
* There are three special character buttons (acute accent, circumflex/tilde and
apostrophe/asterisk) that don't have any buttons to map to naturally. I've put
these at other places:
* Acute accent (´) can be found in the lower left corner, conveniently
placed to reach for making an é.
* Apostrophe (') was put in the lower left corner, close to acute accent.
* Circumflex (^) and asterisk (*) was placed in the lower right corner.
* Tilde (~) and diaeresis (¨) I couldn't find a good place for, so I left
those out. I could only get the buttons to produce a single one of the
characters. How can I get it to work properly?
* The Alt button on right thumb was exchanged for AltGr (RAlt).
* I changed the backslash in the numpad (layer 1) for a minus. Thought it was
more sensible.
* I didn't find a good place for the "<>|" button, so that one was left out.
That is a problem that really needs to be resolved. Pipe can be found on layer
one, however.