included amj40 implementation of nhou7 from https://github.com/nhou7/qmk_firmware_amj40
Fabian Topfstedt
8 years ago
parent
de9331c50c
commit
4a1f701d9f
@ -0,0 +1,3 @@
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,30 @@
|
||||
#include "amj40.h"
|
||||
#include "led.h"
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
matrix_init_user();
|
||||
led_init_ports();
|
||||
};
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
matrix_scan_user();
|
||||
};
|
||||
|
||||
void led_init_ports(void) {
|
||||
// * Set our LED pins as output
|
||||
DDRB |= (1<<2);
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||
// Turn capslock on
|
||||
PORTB &= ~(1<<2);
|
||||
} else {
|
||||
// Turn capslock off
|
||||
PORTB |= (1<<2);
|
||||
}
|
||||
}
|
||||
@ -0,0 +1,38 @@
|
||||
#ifndef AMJ40_H
|
||||
#define AMJ40_H
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
// readability
|
||||
#define XXX KC_NO
|
||||
|
||||
/* AMJ40 ver2.0 layout1 配列一
|
||||
* ,-----------------------------------------------------------.
|
||||
* | 00 | 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 | 0A | 0B |
|
||||
* |-----------------------------------------------------------|
|
||||
* | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 1B |
|
||||
* |-----------------------------------------------------------|
|
||||
* | 20 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 2A | 2B |
|
||||
* |-----------------------------------------------------------|
|
||||
* | 30 | 31 | 32 | 34 | 35 | 39 | 3A | 3B |
|
||||
* `-----------------------------------------------------------'
|
||||
*/
|
||||
#define KEYMAP( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1b, \
|
||||
k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
|
||||
k30, k31, k32, k34, k35, k39, k3a, k3b \
|
||||
) { \
|
||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b}, \
|
||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, XXX, k1b}, \
|
||||
{k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b}, \
|
||||
{k30, k31, k32, XXX, k34, k35, XXX, XXX, XXX, k39, k3a, k3b} \
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
void matrix_init_user(void);
|
||||
void matrix_scan_user(void);
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,94 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6072
|
||||
#define DEVICE_VER 0x0002
|
||||
#define MANUFACTURER Han Chen
|
||||
#define PRODUCT AMJ40
|
||||
#define DESCRIPTION qmk port of AMJ40 v2 PCB
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 4
|
||||
#define MATRIX_COLS 12
|
||||
|
||||
// ROWS: Top to bottom, COLS: Left to right
|
||||
|
||||
#define MATRIX_ROW_PINS { F4, F5, F6, F7}
|
||||
#define MATRIX_COL_PINS { F1, F0, E6, C7, C6, B0, D4, B1, B7, B5, B4, D7}
|
||||
#define UNUSED_PINS
|
||||
|
||||
#define BACKLIGHT_PIN B6
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* Backlight configuration
|
||||
*/
|
||||
#define BACKLIGHT_LEVELS 4
|
||||
|
||||
/* Underlight configuration
|
||||
*/
|
||||
|
||||
#define RGB_DI_PIN D3
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 4 // Number of LEDs
|
||||
#define RGBLIGHT_HUE_STEP 10
|
||||
#define RGBLIGHT_SAT_STEP 17
|
||||
#define RGBLIGHT_VAL_STEP 17
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,27 @@
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
#define ws2812_PORTREG PORTD
|
||||
#define ws2812_DDRREG DDRD
|
||||
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,42 @@
|
||||
#!/bin/bash
|
||||
# adjust for cpu
|
||||
# -j 16 gave best result on a hyperthreaded quad core core i7
|
||||
|
||||
LIMIT=10
|
||||
THREADS="-j 16"
|
||||
KMAP=iso_split_rshift
|
||||
|
||||
echo "We need sudo later"
|
||||
sudo ls 2>&1 /dev/null
|
||||
|
||||
function wait_bootloader {
|
||||
echo "Waiting for Bootloader..."
|
||||
local STARTTIME=$(date +"%s")
|
||||
local REMIND=0
|
||||
local EXEC=dfu-programmer
|
||||
local TARGET=atmega32u4
|
||||
while true
|
||||
do
|
||||
sudo $EXEC $TARGET get > /dev/null 2>&1
|
||||
[ $? -eq 0 ] && break
|
||||
ENDTIME=$(date +"%s")
|
||||
DURATION=$(($ENDTIME-$STARTTIME))
|
||||
if [ $REMIND -eq 0 -a $DURATION -gt $LIMIT ]
|
||||
then
|
||||
echo "Did you forget to press the reset button?"
|
||||
REMIND=1
|
||||
fi
|
||||
sleep 1
|
||||
done
|
||||
}
|
||||
make clean
|
||||
make KEYMAP=${KMAP} ${THREADS}
|
||||
if [[ $? -eq 0 ]]
|
||||
then
|
||||
echo "please trigger flashing!"
|
||||
wait_bootloader
|
||||
sudo make KEYMAP=${KMAP} dfu ${THREADS}
|
||||
else
|
||||
echo "make failed"
|
||||
exit 77
|
||||
fi
|
||||
@ -0,0 +1,173 @@
|
||||
|
||||
|
||||
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
|
||||
// this is the style you want to emulate.
|
||||
|
||||
#include "amj40.h"
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _QWERTY 0
|
||||
#define _LOWER 1
|
||||
#define _RAISE 2
|
||||
#define _ADJUST 3
|
||||
|
||||
|
||||
|
||||
enum custom_keycodes {
|
||||
QWERTY = SAFE_RANGE,
|
||||
LOWER,
|
||||
RAISE,
|
||||
ADJUST,
|
||||
};
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
// increase readability
|
||||
#define _______ KC_TRNS
|
||||
#define XXXXXXX KC_NO
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Default Layer
|
||||
* ,-----------------------------------------------------------.
|
||||
* | Esc| Q | W | E | R | T | Y | U | I | O | P | BS |
|
||||
* |-----------------------------------------------------------|
|
||||
* | Tab | A | S | D | F | G | H | J | K | L | Ent |
|
||||
* |-----------------------------------------------------------|
|
||||
* | LSft | Z | X | C | V | B | N | M | , | . | /? |
|
||||
* |-----------------------------------------------------------|
|
||||
* | LCtl | LGui| LAlt| spc fn0 | spc fn1 |fn2|RAlt|RCtl |
|
||||
* `-----------------------------------------------------------'
|
||||
*/
|
||||
[_QWERTY] = KEYMAP( \
|
||||
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,\
|
||||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT,\
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,\
|
||||
KC_LCTL, KC_LGUI, KC_LALT, F(0), F(1), F(2), KC_RALT, KC_RCTL \
|
||||
),
|
||||
|
||||
/* Function Layer 1 HHKB style
|
||||
* ,-----------------------------------------------------------.
|
||||
* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bkspc|
|
||||
* |-----------------------------------------------------------|
|
||||
* | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | [ | ] | Pipe |
|
||||
* |-----------------------------------------------------------|
|
||||
* | F7 | F8 | F9 | F10 | F11 | F12 | End|PgDn| ↓ | | |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | | | Stop| App| |
|
||||
* `-----------------------------------------------------------'
|
||||
*/
|
||||
[_LOWER] = KEYMAP( \
|
||||
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
|
||||
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
|
||||
KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),BL_TOGG, BL_INC, BL_DEC, \
|
||||
_______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
|
||||
),
|
||||
|
||||
/* Function Layer 1 HHKB style
|
||||
* ,-----------------------------------------------------------.
|
||||
* |Caps| |MSel| ⏮ | ⏯ | ⏭ |PSCR|SkLk|Paus| ↑ | Ins| Del|
|
||||
* |-----------------------------------------------------------|
|
||||
* | | 🔇 | ⏏ | | * | / |Hone|PgUp| ← | → | |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | 🔉 | 🔊 | | + | - | End|PgDn| ↓ | | |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | | | Stop| App| |
|
||||
* `-----------------------------------------------------------'
|
||||
*/
|
||||
[_RAISE] = KEYMAP( \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \
|
||||
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \
|
||||
KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, KC_DEL, \
|
||||
_______, KC_TRNS, _______, KC_TRNS, KC_TRNS, _______, _______, RGB_TOG \
|
||||
),
|
||||
|
||||
/* Function Layer 1 HHKB style
|
||||
* ,-----------------------------------------------------------.
|
||||
* |Caps| |MSel| ⏮ | ⏯ | ⏭ |PSCR|SkLk|Paus| ↑ | Ins| Del|
|
||||
* |-----------------------------------------------------------|
|
||||
* | | 🔇 | ⏏ | | * | / |Hone|PgUp| ← | → | |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | 🔉 | 🔊 | | + | - | End|PgDn| ↓ | | |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | | | Stop| App| |
|
||||
* `-----------------------------------------------------------'
|
||||
*/
|
||||
[_ADJUST] = KEYMAP( \
|
||||
_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
|
||||
_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, _______, _______, _______, _______, \
|
||||
_______, _______, _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, \
|
||||
KC_SYSTEM_SLEEP, _______, _______, _______, _______, _______, _______, _______ \
|
||||
),
|
||||
|
||||
|
||||
|
||||
};
|
||||
|
||||
|
||||
|
||||
|
||||
enum function_id {
|
||||
LAUNCH,
|
||||
RGBLED_TOGGLE,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[0] = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC),
|
||||
[1] = ACTION_LAYER_TAP_KEY(_RAISE, KC_SPC),
|
||||
[2] = ACTION_LAYER_TAP_KEY(_ADJUST, KC_LGUI),
|
||||
|
||||
};
|
||||
|
||||
|
||||
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
// MACRODOWN only works in this function
|
||||
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
|
||||
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
|
||||
switch (keycode) {
|
||||
|
||||
case LOWER:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_LOWER);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
} else {
|
||||
layer_off(_LOWER);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case RAISE:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_RAISE);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
} else {
|
||||
layer_off(_RAISE);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case ADJUST:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_ADJUST);
|
||||
} else {
|
||||
layer_off(_ADJUST);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
@ -0,0 +1,11 @@
|
||||
AMJ40 Default Layout
|
||||
=====================
|
||||
|
||||
##Quantum MK Firmware
|
||||
For the full Quantum feature list, see the parent readme.md.
|
||||
|
||||
# Features
|
||||
* Based on a combination of the original AMJ40 keymap from the TMK firmware as well as the Planck Ortholinear keyboard's "Lower," "Raise," and "Adjust" layers.
|
||||
* View the keymap.c file to understand they layout of the keymap.
|
||||
* Has keys to toggle both the switch LEDs and underglow LEDs.
|
||||
|
||||
@ -0,0 +1,4 @@
|
||||
#!/bin/bash
|
||||
git checkout amj60 # gets you on branch amj60
|
||||
git fetch origin # gets you up to date with origin
|
||||
git merge origin/master
|
||||
@ -0,0 +1,35 @@
|
||||
AMJ40 keyboard firmware
|
||||
======================
|
||||
DIY/Assembled compact 40% keyboard.
|
||||
|
||||
Ported by N.Hou from the original TMK firmware.
|
||||
|
||||
*Supports both backlight LEDs as well as RGB underglow.
|
||||
|
||||
*For reference, the AMJ40 uses pin D3 for underglow lighting.
|
||||
|
||||
## Quantum MK Firmware
|
||||
|
||||
For the full Quantum feature list, see [the parent readme.md](/readme.md).
|
||||
|
||||
## Building
|
||||
|
||||
Download or clone the whole firmware and navigate to the keyboards/amj40
|
||||
folder. Once your dev env is setup, you'll be able to type `make` to generate
|
||||
your .hex - you can then use `make dfu` to program your PCB once you hit the
|
||||
reset button.
|
||||
|
||||
Depending on which keymap you would like to use, you will have to compile
|
||||
slightly differently.
|
||||
|
||||
### Default
|
||||
To build with the default keymap, simply run `sudo make all`.
|
||||
The .hex file will appear in the root of the qmk firmware folder.
|
||||
|
||||
|
||||
|
||||
|
||||
### Original tmk firmware
|
||||
The original firmware that was used to port to qmk can be found [here](https://github.com/AMJKeyboard/AMJ40).
|
||||
|
||||
|
||||
@ -0,0 +1,66 @@
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870)
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150)
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
AUDIO_ENABLE ?= no
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
Loading…
Reference in New Issue