Commit Graph

3002 Commits (d3c6da7afff15fa493d7a6c8b00ec6e4ac7274f3)

Author SHA1 Message Date
Raymond Douglas 5bdc5c1190 Added raylas keymap for TADA68 7 years ago
Jason Barnachea a972b26274 Add JC65 ps2avrGB keyboard (#2351)
* Adds JC65 ps2avrGB keyboard

* Adds default keymap

* Adds personal keymap

* Backlight On/off support

Migrated code from the BFake. Functionality only on BL_ON, BL_OFF,
BL_TOGG.

* Backlighting config adjustment

Only 1 level supported.

* Personal keymap update

BL toggle added and RGB layer updates.

* Renamed jc65 ps2avrgb directory

Renamed directory for more clarity.

* Default keymap and default rules

* Personal keymap and personal rules

* Group JC65 QMK and PS2 versions

Group JC65 QMK and PS2 versions, Split directories, Readme for parent
folder.

* Default keycaps and personal keymaps re-added

Default and personal keymaps re-added. Keymaps, Readme, Rules.mk, and
config.h

* v32a default keymap rules

Default to no.

* RGB and Backlight default settings

Set to yes.

* Rules.mk defaults for personal keymap

Rules.mk defaults for personal keymap

* Revised keyboard readme make paths

Revised.

* Path correction

* jc65 default folder set

set default pcb to qmk version

* default rules for v32a

set to enable backlight and rgb by default.
7 years ago
Fred Sundvik 8c2ae4a470 Fix reset for STM32 devices 7 years ago
Drashna Jaelre 6835ae8209 Add the ability to disable Music Mode completely (#2339)
* Skip process_music in NO_MUSIC_MODE is defined

* Skip matrix_scan_music if NO_MUSIC_MODE is defined

* Skip music_all_notes_off if NO_MUSIC_MODE is defined

* Leave matrix_scan_music in, because it reduces firmware size by 150b....

* Add docs for NO_MUSIC_MODE
7 years ago
fredizzimo 53ff8a31b6 Merge ChibiOS and LUFA descriptor support (#2362)
* Move lufa descriptor to protocol/usb_descriptor

* Try to compile usb_descriptor on ChibiOS

* Add lufa_utils for ChibiOS

Lufa USB descriptors for ChibiOS

* More lufa_util compatibility fixes

* First compiling version of shared USB descriptor

* Send the usb descriptors

* Fix the CONSOLE output on ChibiOS

* Add errors for unsupported interfaces

* Enable support for vitual serial port USB descriptors

* Implement virtual serial port for ChibiOS

* Cleanup the lufa_utils

Use the default lufa header files

* Add raw hid support for ChibiOS

This is completely untested

* Enable midi compilation on ChibiOS

* Move midi functionality out of lufa.c

* Don't register sysex callback when not needed

* ChibiOS compilation fixes

* Update ChibiOS submodule

* Fix the Midi USB descriptor

It didn't work properly when both Midi and Virtual serial port was enabled.

* Add MIDI support for ChibiOS

* Fix USB descriptor strings on ChibiOS

* Use serial usb driver for raw hid

* Generalize the ChibiOS stream like drivers

This makes the initialization much more simple and eliminates a lot of
the code duplication.

* Convert console output to chibios stream driver

* Fixes for ChibiOS update

* Update the ChibiOS contrib submodule

To include the usb data toggle synchronization fixes

* Fix duplicate reset enumeration on ChibiOS

* Add missing include

* Add number of endpoints check for ChibiOS

* Enable serial USB driver on all keyboards

* Add missing includes when API is enabled withot midi

* Add another missing inlcude
7 years ago
jetpacktuxedo 7d79412f99 Fixed my minivan F-keys 7 years ago
Niles Christensen 57dde3ddba Makes layers consistent with comments 7 years ago
Danny Nguyen 8afbd649f0 Replace Right key on base layer with RShift, convert adjust to KC_KEYMAP format 7 years ago
Legonut ad01e3c03a New keyboard added "Zen" (#2347)
* New keyboard added

Zen is a split ortholinear currently in group buy.

* remove bad keymap

Keymap was throwing errors

* remove other bad keymap

I should have checked these before haha

* small fix to update folder name

* renamed temp

* renamed to zen

* update folder name

* Slim down matrix code

Suggested by drashna

* move KC_NO

* Update keymap

* change from rev2 to rev1
7 years ago
QMK Bot f26e6fca8a convert to unix line-endings [skip ci] 7 years ago
KeLorean 0e31d85b8e made changes to my kelorean planck keymap (#2343)
* Planck-swapped up/down arrows,s65x-add dvorak

* Added Dvorak as first layer of default keymap

* planck-swap up and down arrows. s65x-added dvorak

* added colemak to kelorean s65x keymap

* made more changes to kelorean keymap

* just tryinng to fix bc i was not connected upstrem
7 years ago
U-LANDSRAAD\drashna 84a713b05c Remove _quantum functions from custom matrix.c code 7 years ago
KeLorean 2908c0f927 made kelorean keymaps for planck and s65x (#2331)
* Planck-swapped up/down arrows,s65x-add dvorak

* Added Dvorak as first layer of default keymap

* planck-swap up and down arrows. s65x-added dvorak

* added colemak to kelorean s65x keymap
7 years ago
Drashna Jaelre 598384bc10 Update to drashna userspace (Keymap Templating) (#2338)
* Change tapping term to be longer

* Make Audio/Underglow settings permanent

* Use wait_ms rather than _delay_ms

* Readd One Shot Mods

* Switch to Imperial March startup sound

* Move OSM to it's own layer

* Minor Formatting Tweaks

* Keymap Templates and formatting fixes
7 years ago
Harley Laue ac82cd1ba7 Added personal nyquist & levinson layouts 7 years ago
f3d3 31f5229191 Added dz60 custom layout (#2302)
* Add files via upload

* Update keymap.c

* Delete keymap.c

* Added dz60 banana-split layout

* Added dz60 custom layout

Added layout for dz60 with split spacebar, arrows and other customizations.
7 years ago
jirgn 2f65ab183d just a planck layout (#2320)
* added jirgn keymap from dotfiles

* added jirgn s keymap as copy from default

* [TASK] removed unnecessary colemak and dvorak layouts

* [TASK] added right shift with tab to enter

* [TASK] added ctrl keys beside homerow

* [TASK] added Navigation Layer

removed unnecessary BACKLIT
removed Media Controls in Base Layers

* [TASK] added left Navigation mode  fixed some doc

* [Fix] locked navigation layer by adding a transparent key for nav_mod
keys

* [TASK] added some more symbols and removed lower F1-F12 keys

* [TASK] added some README and a layout design

* [FIX] forced for adding to repo

* [FIX] forced for adding to repo

* [FIX] problem with layerswitching and hanging ctrl

* removed image from repo

* removed github image link with permalink from layout designer

* removed github image link with permalink from layout designer

* replaced image with permalink to layout editor
7 years ago
yiancar 8350d7e607 Cu24 keyboard addition (#2330)
* Added Modular keyboards L,R and NUM

Created code modules for the 3 modules of the modular keyboard.
Original idea by MechboardsUK. Uses i2c implementation similar to lets
split

* CU24 Support

Addes Support for the upcoming CU24 keyboard sold by CapsUnlocked

* Removed modular keyboards to make stuff clear

* Lower Case folders

* Remove CU24 - Rename Folder

* Add CU24 - Renamed

* Fixed ignore list

I am stupid
7 years ago
Emily Soldal a6be48681a Map num lock and caps lock LED events to the RXLED and TXLED 7 years ago
HagVcom e9944bfc8e Added "hag" keymap to Iris (#2313)
* Create keymap.c

Add Hag keymap, a heavily modified dvorak swedish keymap with multiple layouts and often used stuff under the alpha cluster.

* Create config.h

* Create rules.mk
7 years ago
Kenneth Aloysius 9303b42e69 Update personal layouts, free up matrix_scan_user for JJ40 (#2319)
* Add NIU Mini keymap from Planck keymap

* Remove old keymap files

* Fix README, removed Planck references

* Add default layout, move Planck layout to separate folder

* Update README

* Add my XD60 keymap

* Change RShift to slash

* Fix keymap: stuck on MO(1)

* Move RESET to Fn+Enter

* Add: RGB saturation cycle

* Add numpad layer to keymap

* Fix last case

* Cleanup Mechmini keymap. Once the custom RGB function is defined, there is no need to manually handle RGB code.

* Change default to KEYMAP_MIT, not KEYMAP_OFFSET

* Add custom RGB code for JJ40

* Reset Mechmini advertised power draw to 500. Will have to test actual maximum power draw later.

* RGB working on JJ40.

* Fix: saturation increase/decrease flipped

* Add new directory for my custom keymap with RGB keycodes

* Swap LAlt and LGUI

* Update JJ40 max power draw with measured value

* Update: fun40 rules.mk to enable underglow; earlier failed Travis CI

* Fix: init RGB LEDs on boot. Also added HHKB-like keymap for XD60.

* Super rudimentary backlight test, init RGB LEDs on boot

* Backlighting works - stays on for now

* Toggling working

* Now can override backlight.c functions. Problem was functions in backlight.c weren't called before due to a lack of matrix_scan_quantum() in matrix.c

* Timers not working

* Delete global.h

* Cleanup

* Compiles

* Good sign: LEDs stop working again

* Handle timer1 overflow

* Progress: fix: forgot to init

* Backlighting fully working now except breathing.

* Revert keymap to original keycodes

* Update XD60 keymap README

* Update JJ40 keymap with backlight toggles

* Breathing working just fine.

* Update references

* Add backlight_set() call

* Cleanup code to disable backlight

* Fix: does not compile

* Fix: missing call to rgblight_task.

* Testing with BACKLIGHT_BREATHING

* Cleanup

* Cleanup comments

* More commenting cleanup.

* Do not enable BACKLIGHT_BREATHING by default

* Update XD60 keymap

* Update: move matrix_scan_kb out from matrix.c to jj40.c (kb-level)

* Cleanup for PR

* Fix conflict in readme.md for NIU mini

* Restore original power consumption figure

* Fix: matrix_scan_user() now has to be defined in the keymaps

* Add weak `matrix_scan_user` so it does not have to be defined in keymap

* Add weak matrix_init_user()
7 years ago
kifinnsson 042a450e24 Personal BEAKL9 based keymap (#2304)
* Adding personal BEAKL9 based keymap

Initial commit, very much a WIP/Proof of concept.

* Updating personal BEAKL9 based layout

* F-keys added to upper layer
7 years ago
jola5 2cf6bfe9ac Not quite neo (#2318)
* planck with a not-quite-neo layout for a de-DE OS/SW keymap

* ergodox infinity with a not-quite-neo layout for a de-DE OS/SW keymap

* add documentation
7 years ago
Donald 2917e55bd4 Added info.json and updated README for Deltasplit75 (#2266)
* Added info.json and updated README

* Updated info.json
7 years ago
Louis Orleans 55d4c9b162 🔧 create info.json for Infinity Ergodox (#2267)
* 🔧 create info.json for Infinity Ergodox

I'm not sure if the bootloader key is set correctly.

* 🐛 fix layout name
7 years ago
mvs 0310eafdcf QWERTY based layout with thumb-chording (SHIFT + SPECIAL) and programming layer. 7 years ago
Stephen Tudor f2459997ba Add smt keymap for KBD75 7 years ago
Brosseau Valentin 3cf752f83f Xd75 : Bépo layout for the XD75 (#2166)
* Add xd75 layout

* Add Readme

* Update layout

* Remove Backlight keys

* Move ENTER / BACKSP / DEL

* Commit my bepo layout instead of the qwerty version since i will not use it

* Use 0 instead of 00

* Fix TODO key

* Update the readme

* Replace wrong key placment

* Update center column

* Update the layout with 2-u key

* Adjust the fn layer

* Adjust the main layer

* Adjust the fn layer
7 years ago
Christian Richter 087fa37b7a Added us based keyboard layout with cursor keys and mouse functionality for SATAN GH60 (#2180)
* Add chaser keymap

* Added missing readme

* Add missing mousewheel und mousebutton 3
7 years ago
Daniel Shields 4a04c7265e Replace custom tap dance keys with mod tap keys in planck/keymaps/dshields 7 years ago
Chris Lee 9584db055b Add support for key backlighting to bfake
If BACKLIGHT_ENABLE is set to `yes` in `rules.mk`, then the user
can use the `BL_*` keycodes to adjust the backlight. At the moment,
only on/off is supported.
7 years ago
Koen Klinkers 38ab86e8f2 updated xd75 layout (#2321)
* plank layout

* ergodone

* x75

* readmes

* added rgb controls

* bslash

* added backlighting based on layer/modifier

* changed colors
7 years ago
Oryhara 7636fdbbd0 Halfkey function for every layer (#2327)
* started work on halfkeyboard

* update to keymap

* halfkey layouts complete for dvorak and qwerty

* added plover layout to halfkeyboard mapping

* fixed error in dvorak layout right hand

* fixed error in dvorak layout right hand, comments updated

* thing

* added minus and equals to normal layouts

* added minus and equals to normal layouts

* adde visualizer matching halfkeyboard mappings

* adde visualizer matching halfkeyboard mappings

* updated keymaps for mirror handedness functionality for all layers.  Also added visualizer code for distinct color for each layer, and LCD text displaying the current layer.

* had a KC_TILD where should have had KC_GRAV

* its spelled KC_GRAVE
7 years ago
Null cee0a33396 added my layout (#2326)
* added my layout

basically just default with proper arrow-keys

* fixed arrow keys now works properly
7 years ago
LEdiodes b0805e38b9 added ATOM47 (Vortex Core QMK powered PCB) & DZ60 Custom config(LEdiodes) (#2310)
* added ATOM47 (Vortex Core QMK powered PCB)

* fixed broken\unfinished comment block

* moved Layer template to default template.

* moved Layer template to default template and removed template from the keymap.c file.

* Added LEdiodes config

* created readme.md

contains an image of 60% board(LEdiodes).

* updated readme.md with images

added images of the PCB and some feature details from https://geekhack.org/index.php?topic=93447.msg2545221#msg2545221

* removed excess words.

* followed the readme template to a T.

* formatting fix : added a return.
7 years ago
sanosis 2480e5d69a Support for YMDK NP21 (#2316)
* ymdk_np21 initial support

Base support of ymdk_np21 - based on jj40. Full grid layout

* Update README.md

Replacing description.

* Adding YMDK NP21 to comunity list.

Adding YMDK NP21 to community supported list.
7 years ago
sanosis 056ecb1463 Adding jj40 to keyboard list (#2315)
* Adding jj40 to keyboard list

Adding jj40 to Community-supported list.

* Update readme.md
7 years ago
MakotoKurauchi bceffdefca Add helix keyboard (#2308)
* Fork from Let's Split

* Organizing files

* Delete some keymaps

* I2C and serial enabled at the same time

* Change readme

* add #define HELIX_ROWS for multiple rows

* Delete avrdude flashing script

* Delete makefiles

* Subproject elimination

* Fix lufa path

* Remove PLAY_NOTE_ARRAY usages to get rid of warning.

Fix conflicting function name

* Mousekey change default to off

* Fix to oled display adjust

* make rev2

change pin assign
change keymap

* use master_buffer

* Timing adjustment

* Organizing files

* Change Keymap

* Change Keymap

Add EISU and KANA
Correct 4rows

* NKRO default to disable

* EXTRAKEY_ENABLE default to disable

* add rgb reset key

* rgb custom function enable

*  Extend font

* add RGBLED_POWER

default folder to helix/rev2
RGB_ENABLE to no

* renamed directory

* Disable RGBLIGHT_CUSTOM_DRIVER

* Disable LOCKING_SUPPORT_ENABLE

* Update bootloader setting

* Change readme

* Fixed argument error
7 years ago
Gabriel Rauter 86225ccc9b katana60: fix bootloader size to work with PCB
Fix the bootloader size so the `RESET` key actually resets to the
bootloader instead of just restarting the boards.
7 years ago
Mason McAllaster 13d288116f Adding personal keymap for planck/niu_mini (#2263)
* Adding mason keymap for planck/niu_mini

* Adding power shortcut
7 years ago
manofinterests a9bbf9ee5c hi there friends 7 years ago
na7thana ed659aa3a8 Hi there :) (#2273) 7 years ago
Alex Vogel b9b67e9614 [Keymap] semi-ISO Spanish HHKB Keymap for Satan Keyboards (#2290)
* ISO HHKB first commit

* First version of my HHKB ISO Spanish Keymap

* Readme.md

* Added more media keys.
Caps Lock added on function layer.
Backlight toggle added on funtion layer.

* RGB support for WS2812B RGB led strip

* RGB and brightness control.
7 years ago
Greizgh 35b44ac699 Fix compilation error when RGB light is disabled 7 years ago
TerryMathews 61d851af65 Add SSD1306 OLED display support to TKC1800 (#2293)
* Add support for SSD1306 OLED display

* Correct keymap

Had tilde on keymap instead of grave, corrected.

* Winkeyless keymap
7 years ago
allo-world 7c3d2d5f64 Added KBD66 (#2292)
* Created default layout for KBD66.

* Added KBD66 ISO layout.
7 years ago
Danny Nguyen 9a91b42e92 Add Chocopad keyboard 7 years ago
Danny Nguyen c73514a2b7 Update pinout for Rev. 1.0 Iris without LED 7 years ago
Joe DeVivo ac642de9d7 Iris send backlight info over i2c 7 years ago
U-LANDSRAAD\drashna 7d8a20b07f Disable MIDI on Planck so all revisions compile without compilition size errors 7 years ago
Fred Sundvik 894fa0902f Enable FPU on Clueboard60 7 years ago
Kenneth Aloysius 365b863578 Backlighting for JJ40 and underglow initialisation code (#2260)
* Cleanup Mechmini keymap. Once the custom RGB function is defined, there is no need to manually handle RGB code.

* Change default to KEYMAP_MIT, not KEYMAP_OFFSET

* Add custom RGB code for JJ40

* Reset Mechmini advertised power draw to 500. Will have to test actual maximum power draw later.

* RGB working on JJ40.

* Fix: saturation increase/decrease flipped

* Add new directory for my custom keymap with RGB keycodes

* Swap LAlt and LGUI

* Update JJ40 max power draw with measured value

* Update: fun40 rules.mk to enable underglow; earlier failed Travis CI

* Fix: init RGB LEDs on boot. Also added HHKB-like keymap for XD60.

* Super rudimentary backlight test, init RGB LEDs on boot

* Backlighting works - stays on for now

* Toggling working

* Now can override backlight.c functions. Problem was functions in backlight.c weren't called before due to a lack of matrix_scan_quantum() in matrix.c

* Timers not working

* Delete global.h

* Cleanup

* Compiles

* Good sign: LEDs stop working again

* Handle timer1 overflow

* Progress: fix: forgot to init

* Backlighting fully working now except breathing.

* Revert keymap to original keycodes

* Update XD60 keymap README

* Update JJ40 keymap with backlight toggles

* Breathing working just fine.

* Update references

* Add backlight_set() call

* Cleanup code to disable backlight

* Fix: does not compile

* Fix: missing call to rgblight_task.

* Testing with BACKLIGHT_BREATHING

* Cleanup

* Cleanup comments

* More commenting cleanup.

* Do not enable BACKLIGHT_BREATHING by default
7 years ago
amanda flagg 5b22ddf526 add dz60 map with arrow keys (#2270) 7 years ago
stephengrier c776c1ce82 Adding stephengrier keymap for the tada68 keyboard. (#2269) 7 years ago
Drashna Jaelre ccaacde4d6 Update to drashna keymaps (#2281)
* Move faux clicky into userspace

* Get Audio and RGB enabled on Orthodox-rev1

* Add faux click to userspace

* Add Orthodox Rev3 check to macros

* Hack Orthodox Name for drashna keymap

* No more One Shots

* Ergodox product name hack

* Enable Audio on Orthodox by default
7 years ago
skullydazed 5836d1a06a Fix up the ARM audio support (#2136)
* Get audio working on clueboard/60

* add keys for music mode

* Change doubles to floats

* add keys for all the songs

* revert to the default startup sound

* Remove music mode until we can figure out why it crashes
7 years ago
manofinterests fd359e23e8 Update info.json 7 years ago
Jack Humbert 4aef0318aa
Update info.json 7 years ago
noisebomb44 6bbe2366ec Update ergodone.c 7 years ago
Kaleb Elwert 3be81a2daf Fix call to memset for various keyboards 7 years ago
chancellorr 586a5e8d1d Adding my Tada68 Keymap. 7 years ago
Daniel Gordon 383a3c1e08 Add Daniel Gordon's Ergodox Infinity and Chimera
* gordon.c defines many aliases for KC codes.
   * gordon.c defines many advanced tap dance functions.
   * This is a squashed commit of about 6 months of work on chimera and
     ergodox infinity changes.
   * Ignore the change-id below.

Change-Id: I83927139e8a80fe08992ae91ec7d62571498f7f7
7 years ago
Mikkel Jeppesen e2352d4fbf Updated files to better support sockets version (#2255) 7 years ago
Mason McAllaster 3a2acd4475 Updating default niu mini keymap to better reflect product 7 years ago
Kyle Sargent ee15d2fe5e Layout for BananaSplit60 (#2257)
* Kamon bananasplit layout

* readme
7 years ago
Oryhara dcb2627237 Halfkeyboard functionality for dvorak and qwerty (#2261)
* started work on halfkeyboard

* update to keymap

* halfkey layouts complete for dvorak and qwerty
7 years ago
farmakon 8e0d9e2637 Adding XMMX (#2236)
* gh80_3000

* Add files via upload
7 years ago
Jack Humbert 81ae0fb10e
Update info.json 7 years ago
Jack Humbert e659bc4467
Info json fixes (#2232)
* Update info.json

* Update info.json

* Update info.json

* Update info.json
7 years ago
Jack Humbert e3541853a9
Update info.json 7 years ago
Jack Humbert 0ea6cf719e
Update info.json 7 years ago
Hannes Egler c9d23f50f6 Added RGB and in-switch LED controls (#2227)
* Default layout with RGB and in-switch LED controls

This is a variation of the default keymap with added RGB underglow and in-switch LED controls.

* Readme for default_rgb keymap

* ISO keymap with RGB and in-switch LED controls

This is a variation of the default ISO keymap with added RGB Underglow and in-switch LED controls.

* readme for iso_rgb keymap
7 years ago
rooski15 c5c35f5f4b Rooski15: Update Prime_R ReadMe & Keymap (#2228)
* Rooski15: Updated prime_r Keymaps

* Rooski15: Updated Prime_R:Rooski

* Rooski15: Updated Prime_R readme

* Rooski15: Updated Prime_R readme

* Rooski15: Updated Prime_R readme
7 years ago
TurboMech 6b584a23c0 Updated ACR60, Mechmini, ALU84 readme information and config.h descripters (#2231)
* Updated ACR60, Mechmini, ALU84 readme information and config.h descripters

Update MECHKEYS keyboards to be uniform in readmes and config.h's PID, MANUFACTORER, and DESCRIPTIONS.   This allows the keyboards to be more uniform amongst the different types.

* Rename keyboards/alu84/keymaps/TurboMech/config.h to keyboards/alu84/keymaps/turbomech

* Rename keyboards/alu84/keymaps/turbomech to keyboards/alu84/keymaps/TurboMech/config.h

* Fixed folder naming for alu84/keymaps/turbomech

* fixed error from compile

removed double `return MACRO_NONE;` and `switch (id) {`
7 years ago
rooski15 6bb3fbd4e0 Prime_R (#2221)
* Rooski15: Add Prime_R Keyboard

* Rooski15: Added keymaps to xd60, xd75, planck, and prime_r

* Rooski15: Updated prime_r keymap

* Rooski15: Added Prime_R and Documentation

* Rooski15: Added Prime_R and Documentation

* Rooski15: Prime_R - Added futher documentation.

* Update config.h

Added device information

* Update readme.md

Updated Planck:EmilyH Readme

* Update readme.md

Updated XD75:EmilyH Readme
7 years ago
profanum429 9e0b244a34 profanum429@gmail.com (#2222)
* Added initial in-switch LED support for the Eagle/Viper V2.
Currently only has four modes: All ON, Mods/Nums ON, Alphas ON, or All OFF

* Revert keymap changes

* Changed switch curly bracket to match style.
7 years ago
Daniel Gordon 4b7fcf0af0 Add info.json file for Chimera Ortho (#2217)
* Add info.json file for Chimera Ortho

* Correct LAYOUT to KEYMAP 

Correct LAYOUT to KEYMAP in chimera ortho's json.info
7 years ago
MechMerlin 22b9303e2a Keeb json layouts (#2219)
* info.json committed to support the qmk configurator project

These are info.json for each of the keyboards I've contributed to
during my time here at QMK

* change LAYOUT to KEYMAP to adhere to matrix definitions
7 years ago
MechMerlin cbc5de67be Duck Eagle/Viper V2 support (#2216)
* Preliminary support for Duck Eagle/Viper V2 60% board. This is a copy of the octagon/v2 with things changed to reach a compiling state

* Get a 60% keymap compiling, this might not be what the eagle/viper
really supports

* Update readme to point to correct GeekHack link

* Get keymap working on a Duck Eagle

* Add code submitted by profanum429

- Add HHKB style top row to v2.h
- Modify read_rows function to take into accout the caps lock firmware key
- Modify default keymap to match the new v2.h
- Adjust readmes

* Fix bug related to col 0 not working

* Add keymap for mechmerlin

* Add profanum429's viper hhkb layout

* Add visual representation for mechmerlin layout
Add navigation keys to keymap

* Add a better visual representation to the mechmerlin keymap

* Add profanum429's Viper layout!

* Updated profanum429 keymap to match a full HHKB
Enabled media keys in rules.mk

* Revert "Updated profanum429 keymap to match a full HHKB"

This reverts commit ed914160d7e27e6412d2c7c5c1c4fa0a04838667.

* Fix default keymap for Eagle

* Enable extra keys for audio control support

* Modified timings in indicator_leds to accomodate the WS2811S chips on the Eagle/Viper2 PCBs at 800kHz with a 16mHz clock
Modified the backlight settings to not interfere with the default RGB underglow code from QMK
Modified the order of the LEDs in the LED status bar at the top of the Eagle/Viper2 PCBs (3,2,1,6,5,4,8,7 order)

* Cleaned up indicator code to remove unused functions as the RGB underglow uses the
default driver provided by QMK

Commented out backlighting code in v2.c

* update readmes to reflect profanum's awesome contributions and fix typo in make instructions

* Remove custom RGB logic and just rely on QMK RGB underglow. We'll leave the backlighting in place for now
7 years ago
TurboMech 9cb1d36974 Added Mechmini 2.0 to Mechmini keyboard folder
This creates a v1 and v2 subproject.  V1 retains all the same implementations of the bootmapper-ported Mechmnini 1 including #2196.  V2 adds the Mechmini 2.0 kayboard support (I know it took me way to long to get it a pull request in).

All readme's updated to reflect compiling the two seperate keyboards.  Simply either `make mechmini/v1:default` or `make mechmini/v2:defualt`.  Utilizing the rules.mk using `make mechmini:default` will automatically create the Mechmini 2 default keymap as this is the current version and has a much wider user base.
7 years ago
Rickard von Essen 0a5d302622 Let's Split: Minor fixes in keymap.c comments
- Single quote (') is the un-shifted key, not double quote (")
- Fixed alignment
7 years ago
Stacy Devino 5f0a2e078f JC65 - Adding in CapsLock LED support and my personal keymap
Signed-off-by: Stacy Devino <stacydevino@gmail.com>
7 years ago
benlyall feac994f6f Added support for V60 Type R Polestar backlight and RGB underglow (#1852)
* Added V60 Type R Polestar Backlight and RGB Underglow support

* made RGB Underglow stuff optional, to support the non Polestar V60

* updated readme and rules

* fixed typo in readme
7 years ago
Balz Guenat 4931510ad3 backlight breathing overhaul (#2187)
* add breathing to bananasplit

* backlight breathing overhaul

* fix the backlight_tick thing.

* fix for vision_division backlight

* fix a few keymaps and probably break breathing for some weirdly set-up boards.

* remove BL_x keycodes because they made unreasonable assumptions

* some fixes for BL keycodes

* integer cie lightness scaling

* use cie lightness for non-breathing backlight and make breathing able to reach true max brightness
7 years ago
John Ramsay d6215ad6af Aviator Keymap (#2204)
* Create aviator.txt

* Add files via upload

* Delete aviator.txt

* Delete readme.md

* Add files via upload

* Update readme.md

* Update readme.md

* Delete keyboard-layout.png

* Update readme.md

* Update readme.md

* Update readme.md
7 years ago
Kenneth Aloysius eba4cb7a04 RGB underglow support for JJ40, clean up redundant code in Mechmini keymap (#2196)
* Cleanup Mechmini keymap. Once the custom RGB function is defined, there is no need to manually handle RGB code.

* Change default to KEYMAP_MIT, not KEYMAP_OFFSET

* Add custom RGB code for JJ40

* Reset Mechmini advertised power draw to 500. Will have to test actual maximum power draw later.

* RGB working on JJ40.

* Fix: saturation increase/decrease flipped

* Add new directory for my custom keymap with RGB keycodes

* Swap LAlt and LGUI

* Update JJ40 max power draw with measured value

* Update: fun40 rules.mk to enable underglow; earlier failed Travis CI
7 years ago
James Neill 85ea963931 Remove residual Makefiles from the keyboards directory (#2193)
* Removed residual Makefiles from keyboards directory

* Removed reference to Makefile
7 years ago
wanleg 492a16308a wanleg's gherkin layout
my layout for the Gherkin
7 years ago
Drashna Jaelre 17200f4712 Clean up and tweaks of drashna keymaps and userspace (#2200)
* Minor tweaks

	modified:   users/drashna/drashna.c

* Fix Workman ASCII art

* Add OSM for shifts

* Make Viterbi's 00 code consistant

* Minor Cleanup off Userspace

* Change Tapping Term on Ergodox

* Re-add EEPROM code

* Minor updates and tweaks

* Use QMK_H variables to make keymaps more universal

* Forgot 'break;' for covecube layer

* Tweak Viterbi files now that I have hands on

* Add secrets to Ergodox

* RGB tweaks to Viterbi

* Viterbi RGB layout tweeks

* Minor tweaks

* Add One Shot Mod tap toggle

* Add Faux Clicky to Viterbi, and disable controller's LEDs

* Minor tweaks

* Move D3 keycode defines into userspace

* Updated Userspace Readme
7 years ago
Takahiro Miyamoto eb903c7623 Add meira/takmiya keymap 7 years ago
Hannes Egler c58921c64c KBD75 ISO support (#2201)
* iso_de_mac

ISO-DE layout with mac media controls

* Delete keymap.c

* iso_de_mac

ISO-DE support with Mac media keys

* Add files via upload

Layout overview

* iso layout support

Adds support for the extra key of ISO

* Update keymap.c

typo-fix

* fixed mac next key

* Delete Layout.png

* Delete keymap.c
7 years ago
TurboMech e9f44ee96d added ALU84 keyboard and TurboMech user space (#2206)
* Added ALU84

Added ALU84 from mechkeys.ca.  TurboMech keymap is MacOS oriented, need to still update the defualt keymap.

* added alu84 and TurboMech userspace

* updated keymap, config.h and rules.mk for alu84
7 years ago
skullY 9cb80d68e2 Add the missing rules.mk for my layout 7 years ago
skullY 4932f9566a capslock led fix for clueboard 60 7 years ago
Ryan Mitchell 3b9e4967b8 fix breaking build: remove merge conflict text 7 years ago
Oscillope 846598541b Oscillope keymap: handy programming macros (#2176)
* Added macro to type -> since that symbol requres much finger acrobatics otherwise.

* Added macros for braces
7 years ago
MechMerlin c68597d9ad Octagon V1 Support (Port) (#2184)
* Preliminary commit for Octagon V1 support

This is essentially a cp -R v2 v1 with a few things changed to
get it to compile and build.

* The Octagon V1 supports up to 84 keys as opposed to the V2 which
supports up to 86. This commit changes the keymap to match it.

* Temporary default keymap just to get things to compile

* Update readme file

* Fix switch matrix

* Fix underglow lighting option

* Fix keymap to take care of shifted columns

* Fix keymap formatting

* Remove un-needed files left over from rasmusx

* Make Octagon V1 have its own keymap directory with default keymap

* Make Octagon V2 have its own keymap directory with default keymap

* Cleanups and readme edits
7 years ago
U-LANDSRAAD\drashna 5ffec5d9b0 Disable MIDI on preonic to fix firmware compilation errors 7 years ago
Nicolas Guelpa a8eaf0b666 Adding pok3r like layout to the let's split (#2135)
* adding new layout for the planck that helps when coming from the pok3r

* Fixing the function layer

* Update readme.md

* Update keymap.c

Making some small adjustments

* Update keymap.c

switching GUI and Esc

* Update keymap.c

* adding mod tap on left and right shift

* adding mod tap on left and right shift

* poker keymap for lets split

* fixing the FN layer

* removing unused file
7 years ago
Drashna Jael're 4f484bc1c9 Add on/off/toggle keycodes for Auto Shift 7 years ago
U-LANDSRAAD\drashna a1fa70f94d Add toggle option to AutoShift 7 years ago
Kaleb Elwert 818042b2c3 k_type: add belak keymap 7 years ago
MechMerlin 9dd3e08fdd Octagon V2 Refactor (#2170)
* rename octagon_v2 directory to octagon directory

* Move octagon_v2 files to v2 sub-directory

* Edit readme files

* setup header files for building multiple versions of the Duck
Octagon.

* Changes as per Jack's PR 2170 comments
7 years ago
Arda Kılıçdağı b8f08d936d Added Ardakilic keymap for Tada68 (#2174)
* Added Ardakilic keymap

more key fixes

* power key instead of eject
7 years ago
kimkimkeren dd37245373 Custom Keymaps for Certain Layouts (#2161)
* Add keymap for my friend's KBD75\nBug : RGUI is read as RALT

* Add keymap for Nyquist

* Add Keymap for Whitefox (Truefox layout only)

* Add Keymap for XD75 and XD73 (XD75 with 1u blocker each on left and right bottom
7 years ago
Vlad Buslov cca3dcc5ec Add my keymap for dz60 7 years ago
kamisamamizu 12e66330c5 Add COSPAD to QMK and add functions to read HSV (#2156)
* Added functions to read HSV values

I have added three functions to rgb_light.c to be able to read the hue, saturation and value from other places.
They are rgblight_get_hue(), rgblight_get_sat(), adn rgblight_get_val().

* Create keymap.c

* Add COSPAD support to QMK

I have ported the COSPAD numpad to qmk.

* Update readme.md

* Update cospad.c
7 years ago
That-Canadian d91c9858c5 Christmas tree (#2160)
* Line ending stuff again

* Added initial files for Christmas Tree PCB

* Updated Readme and info json's, also config.

* Cleaned up keymap file, added proper comments for keymap. Removed readme leftover from original copy of planck folder structure.

* Forgot to push rules.mk for the V2017 folder, fixed now.
7 years ago
U-LANDSRAAD\drashna 8a0997709b Remove MIDI from Planck Rev5 to fix compile build size issue 7 years ago
Jack Humbert 0e1a731446
Update readme.md 7 years ago
Jack Humbert 57ef8a54e4
deletes the extra mechmini readme [doh] 7 years ago
root 1add90a6d2 reforked master and added changes to 7u and 6u iso layouts 7 years ago
Budi Dharmawan e4230c84d0 [budi] tv44 arrow dvorak (#2151)
* [budi] tv44 arrow dvorak

* [tv44/budi] Removed qwerty, added readme
7 years ago
mechmerlin 1485cc1d26 Found some broken links while looking up ARM keyboard support 7 years ago
MechMerlin 163ddd5d15 Duck Octagon V2 QMK Support (#2153)
* Initial commit for Octagon V2 Support

This is still basically just a copy of lightsaver support with
names changed.

* Port xauser keymap from: https://github.com/xauser/tmk_keyboard/blob/xauser/keyboard/octagon_v2/keymap_common.h

* Temporary default keymap just to get things compiling

* Modify config.h to have the right keyboard info

* Partial port of xauser matrix code for octagon v2

* Fix readme.md
1. Fix link to geekhack GB
2. Add microchips
3. Add appropriate attributions

* Fix PORTD

* Intermediate fix to get LEDs working

* Update BACKLIGHT_AREAS enum

* Port the following:
backlight_set
backlight_toggle_rgb
backlight_set_rgb

and resolve dependencies in header files

* Port backlight_update_state to led_set_kb

* Change copyright notice author to MechMerlin

* Remove Rasmus keymap

* Get a default keymap that actually does something and let's you reset.

* Convert keymap into KC_XXXX format.

* Better formatting of the default keymap to make it more readable

* Fix keymap

* Get that Fn key working!

* Some code cleanup and small refactor

* Fix keymap in octagon_v2.h
7 years ago
Josh Sankey dc7cc26dff Christmas tree (#2105)
* Line ending stuff again

* Added initial files for Christmas Tree PCB

* Updated Readme and info json's, also config.

* Cleaned up keymap file, added proper comments for keymap. Removed readme leftover from original copy of planck folder structure.
7 years ago
JWhy a6e46b99b9 Fix reset key in Iris default keymap 7 years ago
Kaleb Elwert ab197af2ea Initial K-Type support (#1963)
* Initial K-Type support

* Copy PJRC_TEENSY_3_1 to work around watchdog issues

* K-Type: Remove bootloader offset in rules.mk

* Ensure matrix and scan quantum functions are called when needed

This is porting a fix from f5422a70b6
7 years ago
Jean Olivier Simoneau 1226c69f4f Adding my xd60 layout. (#2078)
* Added xd60:Jos keymap

* Corrected Layout image for xd60:Jos layout

* Update README for xd60:Jos layout

* Created rules.mk for xd60:Jos layout

* Fixed an edge case for xd60:Jos layout

* Now using a specific  for xd60:Jos layout instead of modifying the main one

* Better physical layout image for xd60:Jos layout
7 years ago
Zach Richard 8a1e656099 new planck keymap, new feature - hybrid shift/enter action key (great for small keyboards!) (#2100)
* new planck keymap, new feature - hybrid shift/enter action key (great for small keyboards!)

* corrected documentation to specify rules.mk file instead of Makefile
7 years ago
Jon Nelson 56f266173c Adding my personal keymap (#2116)
* my personal keymap

* Add files via upload

* Delete baseLayer.JPG

* Delete fnLayer.JPG

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md
7 years ago
Cole Markham 2dfdafbd5b Update '?=' references in rules.mk. Add support for ortho_4x12 layout. 7 years ago
Cole Markham 5fe0fe3756 Fix keyboard not working if I2C pullups not enabled.
Disable backlighting by default.
7 years ago
Cole Markham cc0d4b6513 Cleanup old code and comments 7 years ago
Drashna Jael're 23b1889241 Update revision default 7 years ago
Drashna Jael're 6cd001e337 Fixed orthodox KEYMAP so no londer requires blanks in keymap.c, and added orthodox rev3 7 years ago
Koen Klinkers e4f26a9fcc Personal layout planck,ergodone,xd75 (#2140)
* plank layout

* ergodone

* x75

* readmes
7 years ago
mkende 9cda36238f Add a keymap for the Ergodox EZ meant to be used with a Bépo keyboard layout (French ergonomic layout) (#2141)
* Initial version of the Ergodox EZ Bépo keymap, TypeMatrix style.

* Update the readme file and add some handling of the keyboard LEDs.

* Toggling layer requires 2 taps.

* Remove a constant as it conflicts with an earier definition.

* Fix a typo in a type name.

* Fix the arrow layer that had a bad number.

* Second main version of my bepo keymap, after the tests of the first one.

* Fix the triggering of the function layer and the handling of the LED.

* Reduce the shining of the LEDs.

* Fix the swap layer (that required a keypress on the other side of the keyboard to be deactivated).

* Duplicate some of the mouse button for easy access.

* Move some of the secondary functions out of the center keys.

* Slightly slow down the mouse and mouse wheel.

* Update the comment and readme.md for the V2 of the keymap.

* Invert button 2 and 3 of the mouse. Really fix the SWAP layer.

* Test with the right alt modifier added as secondary function (on hold) of the space keys. The right alt key becomes a left alt one.

* Add specific shift/ctrl for the FN layer; move some mouse keys around to help with that.

* Remove one FN modifier-on-hold key that was not useful.

* Duplicate the FN layer inside the MOUSE layer.

* Add support (not tested yet) for macro recording and play on a single key as a tap dance.

* Allow to stop recording the macro by tapping once on the macro key (still un-tested).

* Add support for macro recording using some tap dance.

* shorten a comment.

* Reinstate the FN toggle on the percent key (so that there is an FN toggle on the right-hand-side).

* Fix some comments and update the link to the most up-to-date image.

* Small fix to the keymap images.
7 years ago
kristmascane 52630f6611 adds @kristmascane's keymap (#2144) 7 years ago
Drashna Jaelre 2ec1ab2b35 Update Drashna keymaps (#2145)
* Change overwatch to Gamepad

* Remove secrets file

* Add sample sensitive.h file

* Borrow @colinta's secrets.h include method

* Remove unnessary placeholder for macros

* Set secrets to use PROGMEM for char string

* Add readme files to my keymaps and userspace
7 years ago
Nico Hormazábal 557745ba9f Updated keymap and readme (#2147)
* added own keymap for planck

* Update Readme.md

* Update Readme.md

* Update Readme.md

* Update Readme.md

* Update Readme.md

* dynamic macros

* Update Readme.md

* moved the reset button

* Update readme for volume explanation

* Format

* Update Readme.md

* Update Readme.md

* added safe double shift

* changed the modified shift to regular shift, for allowing shift + F keys
7 years ago
bunnybugslpat f229d22416 added iso support
added a keymap for an iso layout with 7u spacebar
7 years ago
Benny Powers 98ac32b417 Vim Layout for Ergodox-EZ (mac only) (#2112)
* ignore libs

* Clang complete file

* Add VIM_A, VIM_S, VIM_COMMAND_SHIFT_D, and VIM_COMMAND_SHIFT_A

Add VIM_A, VIM_S, VIM_COMMAND_SHIFT_D, and VIM_COMMAND_SHIFT_A

a s O

* Comment blocks for minimap

generated at
http://patorjk.com/software/taag/#p=display&h=0&v=0&c=c&f=Banner&t=COMMENT

* Be explicit

* More Comment blocks

* Add J

* add A, C, D, J, S, O

* Make h j k l explicitly vim commands (useful for JOIN)

* add cb ce cw ch cj ck cl db de dw dh dj dk dl vb ve vh vj vk vl x ciw diw viw

* debug messages for ci di vi

* Var capitalized

* Save bytes by disabling mouse keys

* Add Y P

* Be more explicit about which key was pressed

* Be more explicit about which key was sent

* Move project to new directory structure

* Remove non-vim layout folder

* Replace KC_TRNS with KC_NO on normal layer

* Insert Mode as default

* Try to prevent crashes

* Put normal mode back

* Revert "ignore libs"

This reverts commit 4c5d7592d6c1b70e689c0b9400afca19c71970a7.

* add rules.mk

* Add mouse bindings

* Checkout most recent keymap following rebase

* Realign mouse button keys

* Make a macro for TO(NORMAL_MODE)
7 years ago
Balz Guenat eeb6443767 actuation point adjustment for fc980c and fc660c (#2134)
* add i2c lib submodule

* add actuation point adjustment to fc980c

* add actuation point adjustment to fc660c also.

* use https for i2c submodule

* move to existing i2c lib

* properly remove old submodule

* oops, forgot some files for the fc660c
7 years ago
That-Canadian c1a6ca46a7 The ruler (#2138)
* Line ending stuff again

* Added initital files and layout for the PCB Ruler keyboard/macro pad thing

* Updated Readme

* Changed make command to new format
7 years ago
Rasmus Schults 7c5428b56d Add rasmus keymap and fix default keymap readme 7 years ago
farmakon d9983082c2 adds the gh80_3000 project (#2132) 7 years ago
Rasmus Schults 41d5d3e655 Add Lightsaver V3 keyboard 7 years ago
Jack Humbert c2f4c4e29e update planck settings 7 years ago
Seebs d1feb8744a Don't "unselect" left-hand rows
"unselecting" left-hand rows is a wasted i2c transaction.

On the left-hand side, the ergodox uses a GPIO expander. It
does *not* change "direction" (input/output) of pins, it just
sets pins high or low.

But all the pins are written at once. There's no way to
change just one pin's value; you send a full byte of all eight
row pins. (Not all of them are in use, but that doesn't matter.)
So every pin is either +V or ground. This is in contrast
with the right-hand side, which is using input mode to make pins
be neutral.

So there's no need to "deselect" the rows on the left side
at all. To select row 0, you set the GPIO register for the
rows to 0xFE. The previous code would then set it back to
0xFF, then set it to 0xFD on the next cycle. But we can just
omit the intervening step, and set it to 0xFD next cycle,
and get the same results.

And yes, I tested that the keyboard still works.

On my system, scan rate as reported by DEBUG_SCAN_RATE goes
from 445 or so to 579 or so, thus, from ~2.24ms to ~1.73ms.

Signed-off-by: seebs <seebs@seebs.net>
7 years ago
Balz Guenat 6d1b45fb84 change the ?= assignments to = 7 years ago
Balz Guenat 2c2e103457 some planck keymap shiftings and include proper-making 7 years ago
Balz Guenat 7235c93827 clean up bananasplit keymap 7 years ago
Nico Hormazábal 6eb89ae906 New Planck Layout (#2123)
* added own keymap for planck

* Update Readme.md

* Update Readme.md

* Update Readme.md

* Update Readme.md

* Update Readme.md
7 years ago
Fredric Silberberg b781cbf7e2 Turn on prevent stuck modifiers for my keymaps. 7 years ago
Cole Markham a14518bf57 Updated copyright headers and peer review fixes 7 years ago
Cole Markham f74f0ac06b Update Meira readme 7 years ago
Cole Markham a9a46adba0 Add support for Meira 7 years ago
Scott Wilson c51dfef958 Add support for LFKeyboard products: LFK78, LFK87 and SMK65 7 years ago
Martin Gondermann dc6b341cf9 Updated readme 7 years ago
Martin Gondermann 155660ff9d Updated color for base layer to better match my key caps (Dasher) 7 years ago
Gaëtan Ark 6e25220eed Pointing to the right build URL
The previous URI used to point to the Nyquist keyboard build guide.
7 years ago
andy f5422a70b6 Enable tap dance and other features for Whitefox
The custom matrix code was missing calls to matrix_*_quantum, disabling quantum features.
7 years ago
Unknown e3b3c1ef82 add do60 support 7 years ago
Biacco42 5bbad3147c Add support for 7x4 ortholinear split KB Ergo42 7 years ago
Colin T.A. Gray 2bac7cf414 F5 pin doesn't support PWM, so breathing isn't an option 7 years ago
Drashna Jaelre d5a76e899d Updates to drashna keymaps and userspace (#2093)
* Add "secret" macor

* Updating secret macros

* Re-add RGB to Ergodox

* Fixed issue when RGB was disabled

* Consistency changes

* Updated bootloader macro

* Fixing audio setup

* Fix bootloader typo

* Update to full list of stings (for completeness)

* Template fix

* Finally got woodpad to force numlock

* Fix for new RGB mode
7 years ago
Baris Tosun dd05bf0d96 Katana60 (#2068)
* Add files via upload

* katana60 defaults, initial pull-request

* removed icons from google drive

* added simple readme files

* pull-request updates

* readme file updated

* readme file formatting

* improvements before live

* colemak readme

* updated readme files

* removed makefiles and updated readme
7 years ago
Drashna Jael're 95e68c4ae8 Fix Audio chime overrides in split keyboards 7 years ago
Colin T.A. Gray d299d0e72d adds led control functions to XD75 layout 7 years ago
Cole Markham 6fddb31c4c Add Crawlpad 2017 files. 7 years ago
Harshit Goel 7730dc3e5c Magicforce68 now in bluetooth flavour (#2051)
* Added working code for mf68_ble

* update read.md

* update read.md

* update read.md

* update readme

* Update README.md

* Update README.md

* added reddit post

* Update README.md

* Update README.md
7 years ago
Drashna Jaelre 8cac6088c6 Remove unnecessary audio code from orthodox (#2076)
* Remove unnecessary startup/shutdown code

* Leave functions intact

* Update rev1.c
7 years ago
khitsule 1548f4c24f Add keymap for atreus and minidox (#2079)
* keymap for atreus and minidox

* minidox keymap khitsule cleaned
7 years ago
Ethan Madden 52b0ad649c Modified default keymap to match ps2avrgb default 7 years ago
Jack Humbert 9fdc276260
Updates bootloader settings, adds file size check (#2029)
* pull fuse settings for bootloader jump

* fix 32a chips

* make automatic bootloader selection optional

* quantify bootloaders

* fixs #164, speeds up dfu reset

* fix for chips w/o usb

* missing an n

* fix bootloader sizes, use words for addresses

* fix bmini, pearl, and [[ issue, make things quiet

* ignore avr errors on arm for now

* update settings for the light

* document bootloader stuff

* add bootloader title
7 years ago
RandTrawick 9113f3387a JJ40 updates (#2056)
* my bits

* fixed
safdb

* readme

* readme

* better name, fixed compile error

* fixed matrix user

* cleanup
7 years ago
Erez Zukerman 0bd453b527
Merge pull request #2047 from seebs/seebs/ergodox_brightness
Make brightness easier to change
7 years ago
Erin Call b697e1bff3 Fix build instructions in the Dactyl readme
Reflects the changes in #1784
7 years ago
TerryMathews 53ad7375c7 Initial support for TKC1800 PCB (#2062)
* Initial support for TKC1800

* Correct typo
7 years ago
Eiji Onchi 5fd400faa9 Fixed bootloader access key 7 years ago
Erin Call f2a0b0ee20 Handwired/Dactyl keyboard (#2058)
* Copy the ergodox_ez code to handwired/dactyl

Differences from the Ergodox:

* Use QMK_SUBPROJECT_H instead of QMK_KEYBOARD_H, since it's under
    handwired
* Omitted several keymaps. They'll eventually be broken (since the
    Dactyl has fewer keys), and I don't want to try to fix them.
* Omitted the keymap images for the default layout, since they depict
    a different keyboard.
* Everything that said Ergodox now says Dactyl, naturally.

* [whitespace] Delete trailing whitespace

My editor does this automatically so it's just gonna keep cropping up...

* Cut the dactyl down to the right number of columns

(Remember, throughout matrix.c, everything called "row" is really a
column, and vice-versa).

* Remove LED-related code

* Tighten up the Dactyl's build options

* Whitespace cleanup in twimaster.c

* Hardtabs -> spaces
* No more trailing whitespace

* Typo fix

* Correct the CPU frequency units

The Teensy's CPU definitely doesn't run at 16 petahertz...

* Restore access to ONEHAND_ENABLE

I turned it off in 26d47cb42622d990a7c3335e7fcc151aa3edfbf0 while
desperately debugging; I just wanted to ensure it wasn't causing the
problem I was seeing. It was not, in fact, causing the problem, so it's
back.

Also fixed the swap matrix in dactyl.c, since it still referred to
columns that exist in the Ergodox but not the Dactyl.

* Clearer phrasing about TWI's effect on scan rate

* Fix up the Dactyl's firmware-loading instructions

Sadly, the Dactyl has no hole for the onboard reset button.

* Dvorak keymap for the Dactyl

* The Erincalling Layout

* Erincalling layout: Add a := key

I've been working in Go, which uses := a lot, and it's awkward to type
in this layout.

* Dactyl README: link to the dactyl-keyboard repo

* Add a missing copyright line

I don't know how much this matters? Honestly, it's enough for me that my
name is on the git commit. But hey, let's be consistent until there's a
specific reason not to be, right?

* Dactyl: remove commented-out code

I hate it I hate it I hate it

There's not even any information about what it was trying to do!!!! >:(

* Add a note about the row/column ridiculousness

* [whitespace] realign some constants

* Don't claim B4 is tied to VCC

It doesn't matter at all? I honestly don't know what the reason ever
was. It looks like it dates back to the original ErgoDox and I've never
seen one sentence about the purpose.

I've been skipping that wire for some time, and I promise it works fine.

* Dactyl keymaps: Send RALT for right-hand alt key

Not terribly important but I just like things tidy OK

* typo fix

* Refer to "dactyl.h" explicitly

QMK_SUBPROJECT_H has been working locally, but fails in CI. Strange!

* Dactyl: Don't use QMK_SUBPROJECT_H at all

It's still breaking in CI, even though it was a never a problem locally.
7 years ago
Balz Guenat 18525aa17b Fc660c port (#2060)
* Port Hasu's FC660C controller to QMK

* fix column mask
7 years ago
Add Chan ac3d9ab761 added addcninblue's layout (#2049)
* added addcninblue's layout

* vim layer
7 years ago
Callum Oakley 2fc727c154 Keymap update (#2045)
* linux shake-around

* move terminal and browser spawning keys

* add a shift to window resizing keys to free combo up for window management

* "jump to tab" shortcuts for firefox

* change window resize modifiers

* change wm keys

* change wm keys again, and reformat keymap to 80chars

* typos

* language key

* qwerty layer for SO, general cleanup
7 years ago
shela d76cc09ed6 Update my keymap (#2042)
* fix bug

* update keymap
7 years ago
Colin T.A. Gray 2c0323bc98 Adds my XD75 layout (#2040)
* adds my xd75 layout

* add secret strings to 'secrets.h' behind compile flag, assign defaults

* macro keys now have defaults (hidden in colinta.h) before any recording, and after clearing the dynamic macros.

* fixed whitespace - using 4 spaces instead of 2
7 years ago
Seebs 7fbe6c3594 improve ergodox ez performance
With these changes, the ergodox ez goes from 315 scans per second
when no keys are pressed (~3.17ms/scan) to 447 (~2.24ms/scan).

The changes to the pin read are just condensing the logic, and
replacing a lot of conditional operations with a single bitwise
inversion.

The change to row scanning is more significant, and merits
explanation. In general, you can only scan one row of a keyboard
at a time, because if you scan two rows, you no longer know
which row is pulling a given column down. But in the Ergodox
design, this isn't the case; the left hand is controlled by an
I2C-based GPIO expander, and the columns and rows are *completely
separate* electrically from the columns and rows on the right-hand
side.

So simply reading rows in parallel offers two significant
improvements. One is that we no longer need the 30us delay after
each right-hand row, because we're spending more than 30us
communicating with the left hand over i2c. Another is that we're
no longer wastefully sending i2c messages to the left hand
to unselect rows when no rows had actually been selected in the
first place. These delays were, between them, coming out to
nearly 30% of the time spent in each scan.

Signed-off-by: seebs <seebs@seebs.net>
7 years ago
Seebs 55f3cd37af fix typo 7 years ago
Paul Ewing d0f3c0576c Add my Atreus62 keymap 7 years ago
Balz Guenat 7d9070c514 I forgot to add a README.md for the FC980C
sorry for forgetting it in the first PR.
7 years ago
Seebs 534cd9d45e Make brightness easier to change
Don't make the #defines unconditional, make them
optional so users can override them with per-keymap
settings more easily.
7 years ago
Balz Guenat 2f5bb2506a QMK port of Hasu's fc980c alt controller (#2043)
* fc980c port, builds but yet untested.

* add my own keymap
7 years ago
Colin T.A. Gray 5b4b471a4f this number just looks wrong, should be 4096 not 4996 7 years ago
Maarten Dekkers b8217eeff4 Add maartenwut's handwire build 7 years ago
Max dcc363390f Added Daisy port (#2016)
* Add files via upload

* Update readme.md

* Update readme.md

* Update readme.md

* Add files via upload

* Delete config.h

* Delete rules.mk

* Add files via upload

* Update config.h

* revised config files

* revised readme

* Update readme.md

* Update readme.md
7 years ago
Seebs 39d3d92364 Allow multiple process_record() calls per scan
This is particularly relevant for, e.g., the ergodox EZ and
other keyboards with slow scan rates. Without changing the API or
behavior of individual process_record() calls, we allow a
configuration flag to make multiple calls in a single scan.

This will probably have miniscule effects on non-steno users,
and it's not enabled by default for any keyboards. Added note
about it to ergodox README.

Signed-off-by: seebs <seebs@seebs.net>
7 years ago
Jack Humbert b669d115c2 adds planck light keyboard 7 years ago
yellowmoneybank c6cdd5422f Neo2Planck (#2032)
* Documentation

* Enabled Mouse-Keys in Makefile

* Layer 1 finished

* Small Bugfixes

* Updated documentation
7 years ago
d_r0ck d6ca4e555a Added files 7 years ago
TerryMathews d8aa018995 Kona_classic: ANSI arrows keymap with locking caps lock support 7 years ago
Marcus Young 08dab374da Add my layout 7 years ago
Drashna Jaelre dbd33782f2 Update to drashna keymaps (#4)
* Minor updates to keymaps

* Minor updates to keymaps
7 years ago
Jack Humbert 1d703a476a update build script to not delete files 7 years ago
Robert Llewellyn f07e2cdd9d DZ60 own true HHKB layout after dz60.h fix (#2012) 7 years ago
Jack Humbert f2c32b3ea4
Splits up ps2avrGB boards into their own folders (#2014)
* move underglow led count from parent to child

* Added pearl support

* Added personal keymap for pearl

* start splitting up ps2avrGB boards

* clean up ps2avrgb boards

* Move keycodes to their own section

* Clarify `KC_PWR` vs `KC_POWER`. Fixes #1994.

*  Cleaned uppersonal userspace and keymaps (#1998)

* Cleanup of keymaps

* Remove Tap Dance from Orthodox keymap

* Cleaned up userspace and keymaps

* Added sample (template)userspace files to my folder

* Document the Teensy hardware reset problem

* add mfluid keymap to atreus62

* Update hand_wire.md

Change "Resin" to "Rosin"

* Add keyboard: mt40 (#2001)

* add keyboard: chinese planck clone

* rename chinese_planck to mt40

* add image for the mt40 board

* lets_split: Fix matrix_init for ROW2COL

Signed-off-by: Marian Rusu <rusumarian91@gmail.com>

* Add Keymap for Whitefox Truefox layout

* Add keyboard: ACR60 (#1999)

* base acr60 keyboard folder created

* mitch acr60 keymap updates, documentation

* latest keymap updates

* slight modifications to layer switching

* Changes to Atreus and Ergodox EZ Dvorak 42key layout (#1997)

* importing 42 key dvorak layout

* added comment for build instructions

* adding atreus dvorak 42 key layout

* added readme

* add readme

* build instructions

* additional MEH shortcuts

* added shifted symbols on symbols layer

* working extra symbols on COMBINED layer

* bring atreus layout inline with the ergodox one

* add necessary macros

* working ls macro

* added more shell macros

* added screen rename / screen number macros

* add ctrl-a key in shell-nav to use screen more easily

* added shell screen layer

* assign screen switching macros to screen layer

* define all screen switching macros

* more screen-related shortcuts added on shell screen layer

* change shell nav bottom right row to match base layer (backspace / delete)

* remove some mappings on SHELL_NAV layer as they are now in the screen layer

* added more screen macros

* changes to COMBINED layer (pipe on the right) and modified shell nav

* moved pipe/backslash to then right

* documented SHELL_SCREEN layer

* put backspace/delete on SHELL_NAV layer

* add an explicit lisence file for github to pickup

* Updated keymaps to allow base layer alternation for QWERTY, Colemak & Dvorak (#1962)

* First commit of the Terminus_Mini firmware and the DivergeJM version of the Nyquist firmware

* Fix terminus_mini & nyquist/DivergeJM readme files

Previously an outdated copy of the default readme. Updated to match the  Nyquist/DivergeJM format (DivergeJM is a split 5x12 implementation of the terminus_mini layout)

* Update makefiles to rules.mk

Renamed both Makefiles to rules.mk, removed references to makefiles

* Updated rules.mk

Inadvertantly removed important code from the rules.mk in previous commit. This has been restored.

Also disabled Tap_Dance in both rules.mk files

* Moved terminus_mini to handwired

Realised that existing directory was not appropriate for the terminus_mini project, moved to handwired.

* New Frosty Flake layout for QFR TKL

Added a TKL layout for the Frosty Flake with a navigation cluster on LOWER under the left hand and a similarly functioning MOUSE layer that includes mouse navigation functionality.

* README fix & keymap update for 3 keyboards

Fixed the markdown for the handwired/terminus_mini:default, Nyqyist:DivergeJM & frosty_flake:QFR_JM.

Added TAPPING_TERM =  150 to config.h for all keyboards

Switched LT(LOWER) and LAlt on the mod row for ortholinear boards.

* Update readme for QFR_JM to include make instructions

* Revert "Merge branch 'master' of https://github.com/mogranjm/qmk_firmware"

This reverts commit a45f264ada09acc14fb85390407bc7ff5bb021e3, reversing
changes made to 62349c33410671a33d4041d50cf27de1d6bdd9cf.

* Revert "Revert "Merge branch 'master' of https://github.com/mogranjm/qmk_firmware""

This reverts commit eae54fb3be2c60dffd704261f84bab98c9e06f93.

* Added QWERTY support to the QFR_JM

Implemented variable default base layer from the Planck default keymap.

* Update README to reflect QWERTY support

* Nyquist:DivergeJM - Update RESET location

Add a reset button to both hands, accessible when halves are disconnected.

* Typo fix

* Update DivergeJM

Switched master to Left hand,
Moved Reset key to a different location

* Added macros to send R pointer & dplyr pipe

Macros added as a string of keypresses, couldn't figure out how to get SEND_STRING to work.

* Added ADJUST -> QWERTY, DVORAK, COLEMAK

Re-implemented update_tri_layer fuctionality to reset base layer for Terminus_Mini & DivergeJM Nyquist keymaps to QWERTY, DVORAK or COLEMAK via the ADJUST layer.

Updated ReadMe files accordingly.

* Fix base layout diagram for Terminus_Mini

Remove split from diagram

* Changed the R operators to SEND_STRING, rather than keypress macros

* Added Dvorak to the QFR_JM keymap

* fixed duplicate row in Nyquist keymap

* Fix readme - LAlt location on mouse layer

* Set EE_HANDS to allow either Nyquist hand to work as master.

* Update R operator strings, clean up layering for terminus_mini, QFR_JM and DivergeJM

"<-" to " <- "
"%>%" to " %>% "

Also played around with the layering, removed unnecessary TAP_TOGGLE for LOWER and shuffled FUNCTION and MOUSE momentary actions to reflect layer order.

* Update bottom alpha row to output symbols on LOWER

This row now outputs the following (z -> /) when in the LOWER layer:
 <-
 %>%
{
[
`
|
]
}
.
/

* Updated readme files for QFR_JM, terminus_mini & DivergeJM

QFR_JM readme reflects correct LOWER bottom row symbol output,
terminus_mini & DivergeJM reflect correct command line make instructions.

* Add media keys to QFR_JM LOWER - Replicate QFR default functionality

* Fix issue with Mouse layering

Stuck on mouse layer because the wrong macro was assigned to the 'exit layer' key. Reassigned that key.

* Changed " <- " to "<- " for QFR_JM, terminus_mini & DivergeJM

* Add "KC_MAKE" to userspace example

* QMK DFU bootloader generation (#2009)

* adds :bootloader target

* update planck and preonic revisions

* remove references to .h files for planck

* update preonic keymap

* only add keyboard.h files that exist

* add production target

* hook things up with the new lufa variables

* update rules for planck/preonic

* back backlight key turn of status led when pressed

* add manufacturer/product strings to bootloader

* fix push script

* Added support for let's split kailh socket version (#2010)

* Added support for socket version of the let's split

* renamed files

* socket-version-works

* fix up lets_split keymaps

* fix up lets_split keymaps

* shrink preonic by a bit

* fix lets_split keyboards

* update travis script

* update travis script

* update version silencing
7 years ago
Damien a8c4af5a45 Updated dbroqua layout for HHKB keyboard (#1990)
* - Fixed DK60 version in config.h

* - Updated dk60 readme with new QMK rules

* - Fixed wording in readme

* Added dbroqua layout for DZ60

I've also updated dz60.h to add "true HHKD" keymap definition (6U
spacebar).

With the default HHKB definition r_alt was not mapped and when I pressed
r_menu it was r_alt.

Regards

* Updated dbroqua layout for HHKB keyboard

Added default configuration and alternate (swap gui/alt keys).

Save user choice in keyboard memory (like plank, thanks for this
feature!).
7 years ago
Jack Humbert dbabfb082c fix lets_split keyboards 7 years ago
Jack Humbert 607876187d shrink preonic by a bit 7 years ago
Jack Humbert 7f3539aa76 fix up lets_split keymaps 7 years ago
Jack Humbert 4ad0bbd672 fix up lets_split keymaps 7 years ago
Mikkel Jeppesen 85172f4f85 Added support for let's split kailh socket version (#2010)
* Added support for socket version of the let's split

* renamed files

* socket-version-works
7 years ago
Jack Humbert ec3e065f0d
QMK DFU bootloader generation (#2009)
* adds :bootloader target

* update planck and preonic revisions

* remove references to .h files for planck

* update preonic keymap

* only add keyboard.h files that exist

* add production target

* hook things up with the new lufa variables

* update rules for planck/preonic

* back backlight key turn of status led when pressed

* add manufacturer/product strings to bootloader
7 years ago
James Morgan 49d8f1c5ed Updated keymaps to allow base layer alternation for QWERTY, Colemak & Dvorak (#1962)
* First commit of the Terminus_Mini firmware and the DivergeJM version of the Nyquist firmware

* Fix terminus_mini & nyquist/DivergeJM readme files

Previously an outdated copy of the default readme. Updated to match the  Nyquist/DivergeJM format (DivergeJM is a split 5x12 implementation of the terminus_mini layout)

* Update makefiles to rules.mk

Renamed both Makefiles to rules.mk, removed references to makefiles

* Updated rules.mk

Inadvertantly removed important code from the rules.mk in previous commit. This has been restored.

Also disabled Tap_Dance in both rules.mk files

* Moved terminus_mini to handwired

Realised that existing directory was not appropriate for the terminus_mini project, moved to handwired.

* New Frosty Flake layout for QFR TKL

Added a TKL layout for the Frosty Flake with a navigation cluster on LOWER under the left hand and a similarly functioning MOUSE layer that includes mouse navigation functionality.

* README fix & keymap update for 3 keyboards

Fixed the markdown for the handwired/terminus_mini:default, Nyqyist:DivergeJM & frosty_flake:QFR_JM.

Added TAPPING_TERM =  150 to config.h for all keyboards

Switched LT(LOWER) and LAlt on the mod row for ortholinear boards.

* Update readme for QFR_JM to include make instructions

* Revert "Merge branch 'master' of https://github.com/mogranjm/qmk_firmware"

This reverts commit a45f264ada09acc14fb85390407bc7ff5bb021e3, reversing
changes made to 62349c33410671a33d4041d50cf27de1d6bdd9cf.

* Revert "Revert "Merge branch 'master' of https://github.com/mogranjm/qmk_firmware""

This reverts commit eae54fb3be2c60dffd704261f84bab98c9e06f93.

* Added QWERTY support to the QFR_JM

Implemented variable default base layer from the Planck default keymap.

* Update README to reflect QWERTY support

* Nyquist:DivergeJM - Update RESET location

Add a reset button to both hands, accessible when halves are disconnected.

* Typo fix

* Update DivergeJM

Switched master to Left hand,
Moved Reset key to a different location

* Added macros to send R pointer & dplyr pipe

Macros added as a string of keypresses, couldn't figure out how to get SEND_STRING to work.

* Added ADJUST -> QWERTY, DVORAK, COLEMAK

Re-implemented update_tri_layer fuctionality to reset base layer for Terminus_Mini & DivergeJM Nyquist keymaps to QWERTY, DVORAK or COLEMAK via the ADJUST layer.

Updated ReadMe files accordingly.

* Fix base layout diagram for Terminus_Mini

Remove split from diagram

* Changed the R operators to SEND_STRING, rather than keypress macros

* Added Dvorak to the QFR_JM keymap

* fixed duplicate row in Nyquist keymap

* Fix readme - LAlt location on mouse layer

* Set EE_HANDS to allow either Nyquist hand to work as master.

* Update R operator strings, clean up layering for terminus_mini, QFR_JM and DivergeJM

"<-" to " <- "
"%>%" to " %>% "

Also played around with the layering, removed unnecessary TAP_TOGGLE for LOWER and shuffled FUNCTION and MOUSE momentary actions to reflect layer order.

* Update bottom alpha row to output symbols on LOWER

This row now outputs the following (z -> /) when in the LOWER layer:
 <-
 %>%
{
[
`
|
]
}
.
/

* Updated readme files for QFR_JM, terminus_mini & DivergeJM

QFR_JM readme reflects correct LOWER bottom row symbol output,
terminus_mini & DivergeJM reflect correct command line make instructions.

* Add media keys to QFR_JM LOWER - Replicate QFR default functionality

* Fix issue with Mouse layering

Stuck on mouse layer because the wrong macro was assigned to the 'exit layer' key. Reassigned that key.

* Changed " <- " to "<- " for QFR_JM, terminus_mini & DivergeJM
7 years ago
Marian Rusu 3f1aab0c2e lets_split: Fix matrix_init for ROW2COL
Signed-off-by: Marian Rusu <rusumarian91@gmail.com>
7 years ago
Andy Holder 43edc83998 Add Keymap for Whitefox Truefox layout 7 years ago
lucwastiaux dd60038eeb Changes to Atreus and Ergodox EZ Dvorak 42key layout (#1997)
* importing 42 key dvorak layout

* added comment for build instructions

* adding atreus dvorak 42 key layout

* added readme

* add readme

* build instructions

* additional MEH shortcuts

* added shifted symbols on symbols layer

* working extra symbols on COMBINED layer

* bring atreus layout inline with the ergodox one

* add necessary macros

* working ls macro

* added more shell macros

* added screen rename / screen number macros

* add ctrl-a key in shell-nav to use screen more easily

* added shell screen layer

* assign screen switching macros to screen layer

* define all screen switching macros

* more screen-related shortcuts added on shell screen layer

* change shell nav bottom right row to match base layer (backspace / delete)

* remove some mappings on SHELL_NAV layer as they are now in the screen layer

* added more screen macros

* changes to COMBINED layer (pipe on the right) and modified shell nav

* moved pipe/backslash to then right

* documented SHELL_SCREEN layer

* put backspace/delete on SHELL_NAV layer
7 years ago
Ryan Mitchell 716ff76f5b Add keyboard: ACR60 (#1999)
* base acr60 keyboard folder created

* mitch acr60 keymap updates, documentation

* latest keymap updates

* slight modifications to layer switching
7 years ago
Thomas Dehaeze eef94b0b40 add mfluid keymap to atreus62 7 years ago
Thomas Dehaeze c2c3aa4f08 Add keyboard: mt40 (#2001)
* add keyboard: chinese planck clone

* rename chinese_planck to mt40

* add image for the mt40 board
7 years ago
drashna 0533362e82 Cleaned uppersonal userspace and keymaps (#1998)
* Cleanup of keymaps

* Remove Tap Dance from Orthodox keymap

* Cleaned up userspace and keymaps

* Added sample (template)userspace files to my folder
7 years ago
Erez Zukerman fd1a0d6753 disables Shine LED layer indication for now 7 years ago
Oscillope 05f15b789f More "oscillope" keymap fixes. (#1982)
* More keymap fixes. F-row on bottom layer wasn't fully setup, also switched raise/lower keys to use tap-toggle.

* Added PrScr, put Tab back on top layer.

* Fixed build breakage with default keymap (unneeded rgblight.h include)
7 years ago
Florian Beeres 7e2223f822 Improved README of yuuki and added RGB commands (#1983)
* Add yuuki keymap

Documentation is still a TODO and the keymap may not be final

* GRV on colon

* add KC_GRV to FN ESC

* more RGB modes

* Update README.md

Add image of layout and fix typo

* switch from jpg to png

For some reason the JPG had red outlines around the keys.

* remove whitespace

* add instruction to reset keyboard before flashing

* gh60 stytle layout

* moved the GH60 style layout to new folder

* add HOME and END

* Add heading

* moved ayanami to other branch
7 years ago
Balz Guenat 3b5381d689 restructure converters (#1825)
* restructure converters

each converter is its own keyboard and different hardware variants are different subprojects.

remove (seemingly) old method of loading layouts from main Makefile

* call led_set_kb() from overridden led_set()

* put converter back into one folder

* revert some structure changes to bring in line with #1784.

Also attempt to get the BLE thing more properly integrated.
Also also fix led_set() to call led_set_kb().
7 years ago
drashna 363aa8aa2e Migrated most code from keymaps to userspace (#1980)
* Add woodpad

* Cleanup

* Remove misc layouts for woodpad

* Move woodpad to handwired

* Updated RGB Underglow info

* Cleanup macros

* Tweaked RGB lighting stuff

* Start to merge orthodox/ergodox keymaps (persistant layers)

* Add woodpad

* Add forced NKRO

* Added default layer (qwerty/colemak/dvorak) detection to RGB Underglow

* Updated macros and added workman keymaps

* Fixed RGB lighting for Workman layout

* Add leader keys

* Remove force NKRO

* Add Viterbi one handed layout and minor tweaks to others

* Finishing up Viterbi keyboard layout, and NKRO tweaks to other layouts

* Made "make" keystroke universal

* Clean up and updates of drashna keymaps

* Add workman layer to planck

* Update to keymaps

* Fix makefile toggle code in ez keymap
Finish adding RGB code to orthodox

* Updated RGB Underglow layer indication code due to discovery of the layer_state_set_kb function

* Remove unnecessary planck layout

* Fixed Workman song

* update make command and added lit reset

* Fixed formatting to fall in line with official standards

* Minor tweaks

* Removed Leader Keys from Ergodox EZ Keymap
Added KC_RESET that resets board and sets underglow to red

* Tweak reset code

* Cleanup

* Remove misc layouts for woodpad

* Move woodpad to handwired

* Updated RGB Underglow info

* Cleanup macros

* Tweaked RGB lighting stuff

* Start to merge orthodox/ergodox keymaps (persistant layers)

* Add forced NKRO

* Added default layer (qwerty/colemak/dvorak) detection to RGB Underglow

* Updated macros and added workman keymaps

* Fixed RGB lighting for Workman layout

* Add leader keys

* Remove force NKRO

* Add Viterbi one handed layout and minor tweaks to others

* Finishing up Viterbi keyboard layout, and NKRO tweaks to other layouts

* Made "make" keystroke universal

* Clean up and updates of drashna keymaps

* Add workman layer to planck

* Update to keymaps

* Fix makefile toggle code in ez keymap
Finish adding RGB code to orthodox

* Updated RGB Underglow layer indication code due to discovery of the layer_state_set_kb function

* Remove unnecessary planck layout

* Fixed Workman song

* update make command and added lit reset

* Fixed formatting to fall in line with official standards

* Minor tweaks

* Removed Leader Keys from Ergodox EZ Keymap
Added KC_RESET that resets board and sets underglow to red

* Tweak reset code

* Fix rebasing issues

* remove head files

* Fix "macro" issue

* Rename ez keymaps for userspace

* Revert "Rename ez keymaps for userspace"

This reverts commit c25425911852e41711a5f0273b5741adb16e5bd4.

* Renamed Ergodox EZ layouts so that all of my personal layouts are on the same name, in prep for using userspaces

* Fix ergodox code

* Remove "drashna-ez" keymap as it's no longer needed

* Migrate majority of code to Userspace
7 years ago
drashna 3e861c2fd5 Update and move around drashna keymaps (#1976)
* Add woodpad

* Cleanup

* Remove misc layouts for woodpad

* Move woodpad to handwired

* Updated RGB Underglow info

* Cleanup macros

* Tweaked RGB lighting stuff

* Start to merge orthodox/ergodox keymaps (persistant layers)

* Add woodpad

* Add forced NKRO

* Added default layer (qwerty/colemak/dvorak) detection to RGB Underglow

* Updated macros and added workman keymaps

* Fixed RGB lighting for Workman layout

* Add leader keys

* Remove force NKRO

* Add Viterbi one handed layout and minor tweaks to others

* Finishing up Viterbi keyboard layout, and NKRO tweaks to other layouts

* Made "make" keystroke universal

* Clean up and updates of drashna keymaps

* Add workman layer to planck

* Update to keymaps

* Fix makefile toggle code in ez keymap
Finish adding RGB code to orthodox

* Updated RGB Underglow layer indication code due to discovery of the layer_state_set_kb function

* Remove unnecessary planck layout

* Fixed Workman song

* update make command and added lit reset

* Fixed formatting to fall in line with official standards

* Minor tweaks

* Removed Leader Keys from Ergodox EZ Keymap
Added KC_RESET that resets board and sets underglow to red

* Tweak reset code

* Cleanup

* Remove misc layouts for woodpad

* Move woodpad to handwired

* Updated RGB Underglow info

* Cleanup macros

* Tweaked RGB lighting stuff

* Start to merge orthodox/ergodox keymaps (persistant layers)

* Add forced NKRO

* Added default layer (qwerty/colemak/dvorak) detection to RGB Underglow

* Updated macros and added workman keymaps

* Fixed RGB lighting for Workman layout

* Add leader keys

* Remove force NKRO

* Add Viterbi one handed layout and minor tweaks to others

* Finishing up Viterbi keyboard layout, and NKRO tweaks to other layouts

* Made "make" keystroke universal

* Clean up and updates of drashna keymaps

* Add workman layer to planck

* Update to keymaps

* Fix makefile toggle code in ez keymap
Finish adding RGB code to orthodox

* Updated RGB Underglow layer indication code due to discovery of the layer_state_set_kb function

* Remove unnecessary planck layout

* Fixed Workman song

* update make command and added lit reset

* Fixed formatting to fall in line with official standards

* Minor tweaks

* Removed Leader Keys from Ergodox EZ Keymap
Added KC_RESET that resets board and sets underglow to red

* Tweak reset code

* Fix rebasing issues

* remove head files

* Fix "macro" issue

* Rename ez keymaps for userspace

* Revert "Rename ez keymaps for userspace"

This reverts commit c25425911852e41711a5f0273b5741adb16e5bd4.

* Renamed Ergodox EZ layouts so that all of my personal layouts are on the same name, in prep for using userspaces

* Fix ergodox code

* Remove "drashna-ez" keymap as it's no longer needed
7 years ago
Fred Silberberg 89357b96d4 333fred layout update (#1971)
* Set up tap dance for layers on the lower button.

* Refactored code to share in the users directory between my two keyboard layouts.

* Small keyboard layout change.

* Updated documentation on oneshot usage in macros/tap dance.
7 years ago
J. Eric Mason 16843bc8c9 Pete's 40th XD64 Layout
Mac layout based on yuuki with some other changes, for Pete's 40th birthday keyboard
7 years ago
lucwastiaux 7854746704 Ergodox EZ and Atreus 42 key dvorak layout updates (#1964)
* importing 42 key dvorak layout

* added comment for build instructions

* adding atreus dvorak 42 key layout

* added readme

* add readme

* build instructions

* additional MEH shortcuts

* added shifted symbols on symbols layer

* working extra symbols on COMBINED layer

* bring atreus layout inline with the ergodox one

* add necessary macros

* working ls macro

* added more shell macros

* added screen rename / screen number macros

* add ctrl-a key in shell-nav to use screen more easily

* added shell screen layer

* assign screen switching macros to screen layer

* define all screen switching macros

* more screen-related shortcuts added on shell screen layer

* change shell nav bottom right row to match base layer (backspace / delete)

* remove some mappings on SHELL_NAV layer as they are now in the screen layer

* added more screen macros
7 years ago
drashna 2c703b1528 Fix RGBLIGHT startup color (#1975)
* Fix RGBLIGHT startup color

While it's awesome to see the layer indicating code in here (no really!), and the general rule is to not alter the default keymap/code....

The problem with the layer_state_set_kb call handling this, is that the code doesn't seem to be called at startup.  So the default layer color won't ever get set on startup.  It needs to be called in the init function to be properly set. 

I've played with this extensively, and if you check my keymaps, that is precisely why I have the setrgb/sethsv in the init function.

* Removed typo (pipe)
7 years ago
Erez Zukerman e45290a62e adds indication up to layer 7 7 years ago
Jack Humbert 1d3a19757c restore default mode/color if no 0 color 7 years ago
Jack Humbert cf9f6bbd91 adds per-layer rgb color option to ez 7 years ago
Jack Humbert 41df0dc9a7 update gh60 info 7 years ago
Jack Humbert 30dc34d529 add gh60 info.json 7 years ago
Michael F. Lamb e899cb8940 several improvements for mitosis:datagrok (#1960)
* mitosis/datagrok: reduce features from rules.mk

* mitosis/datagrok: make both layer keys neighbor shift

* mitosis/datagrok: (no-op) tweak some comments

* mitosis/datagrok: set baudrate to 250k

This requires a corresponding change to the mitosis wireless firmware:
https://github.com/reversebias/mitosis/pull/10

* mitosis/datagrok: move design description from code comment to a readme

* mitosis/datagrok: new layout, new shifted keys, efficient LED code

This is experimental, but compiles and seems to work correctly.

* mitosis/datagrok: whoops, move readme.md

* mitosis/datagrok: a minor layout improvement simplifies custom-shifted code

instead of [, .] [? !], using [, ?] [. !] greatly simplifies the code
needed to perform the shifted-key switching. (And keeps , and . on the
same keys that they are under qwerty.)

also: layout improvements for symbols

* mitosis/datagrok: make my code conform to QMK style guidelines

* mitosis/datagrok: TODO note for layout table in README

* mitosis/datagrok: remove led_set_user until i figure out other changes

need to see if the corresponding changes needed in the keyboard-level code
is okay.

* mitosis/datagrok: simpler layer indicator

* mitosis/datagrok: undo change to keyboard baud; make it in my layout dir.

* mitosis/datagrok: apply same punctuation hack to qwerty layer

* mitosis/datagrok: enable qwerty layer toggle

* mitosis/datagrok: update readme
7 years ago
M Rawash 80e489e122 Added hand-swap matrix to the mitosis 7 years ago
Jennifer 29d1abff07 have led default to off on start up 7 years ago
Jennifer b546da0a19 make more generic, and properly handle inits 7 years ago
skullY f357bd0ccc fix a typo 7 years ago
skullY 685d4c2f97 Do some cleanup for the API 7 years ago
skullY 65eaab8a1a fix labels 7 years ago
skullY 18f3cd1123 add labels to the clueboard layout 7 years ago
skullY 137456e5b1 fix the clueboard layout json 7 years ago
Jack Humbert ec59147507 fix 2u alignment in info.jsons 7 years ago
Jack Humbert 074b78700a update preonic, add info.json 7 years ago
dkrieger 19753788c1 Add satan keymap: HHKB-alike based on dbroqua's, with mouse functionality (#1948)
* Add satan keymap: HHKB-alike based on dbroqua's, with mouse functionality and without LED functionality

* move mouse layer to DOUBLE_HOLD, add UTIL layer for TRIPLE_HOLD

- UTIL layer
    - currently has "RESET" key and nothing else.
    - functionality otherwise covered by bootmagic should go here

- small bugfix: dispatch of [QTY]_HOLD should be based on range tap count
  falls in, not exact count.
7 years ago
Pawnerd 54a8abd785 Added support for Knops Mini (3x2 macropad) keyboard. (#1953)
* Added support for Knops Mini (3x2 macropad) keyboard.

* Added better documentation, according to the QMK standards.

* Fixed typo.

* Changed names of files to comply with QMK standards.

* Ignored makefile in keymap.

* Removed makefiles and added my credentials in the copyrights.
7 years ago
Danny Nguyen 13e1388f2d Add nano switch pad 7 years ago
Jack Humbert 029234f1f1
adds other layouts to rules.mk 7 years ago
Jack Humbert ddf49e8b21 Merge branch 'master' of https://github.com/qmk/qmk_firmware 7 years ago
Jack Humbert 371922ad61 update layout macros for planck 7 years ago
skullY f868a3bb86 Fix the json for clueboard 7 years ago
skullY 5329a80f6c fixup json 7 years ago
Jack Humbert 1683d3a559 adds info.json files to planck 7 years ago
drashna b79a4cfeba Updated personal keymaps (#1945)
* Add woodpad

* Cleanup

* Remove misc layouts for woodpad

* Move woodpad to handwired

* Updated RGB Underglow info

* Cleanup macros

* Fix odd merge issue

* Tweaked RGB lighting stuff

* Start to merge orthodox/ergodox keymaps (persistant layers)

* Add forced NKRO

* Added Colemak and Dvorak layers to default orthodox keymap

* Added default layer (qwerty/colemak/dvorak) detection to RGB Underglow

* Updated macros and added workman keymaps

* Fixed RGB lighting for Workman layout

* Add leader keys

* Remove force NKRO

* Add Viterbi one handed layout and minor tweaks to others

* Finishing up Viterbi keyboard layout, and NKRO tweaks to other layouts

* Made "make" keystroke universal

* Clean up and updates of drashna keymaps

* Add workman layer to planck

* Update to keymaps

* Fix accidental commit because I don't know how to git

* Fix makefile toggle code in ez keymap
Finish adding RGB code to orthodox

* missing underscore in init function declaration

* Updated RGB Underglow layer indication code due to discovery of the layer_state_set_kb function

* Remove unnecessary planck layout
7 years ago
skullY 44d9ad95b7 Add info.json files for clueboard 66 7 years ago
Danny Nguyen fad967af4c Remove extra underscore from MASTER_RIGHT define 7 years ago
DangerousParts 20e18d15e3 Created Kona Classic config (#1791)
* Created Kona Classic config

* Fixed KonaClassic config

* Updated README

* Updated Readme to conform to format standards

* Added ANSI and ISO layout options

* Fixed images in Readme

* Added labels to images

* Added absolute links to images in Readme

* Image link updates again

* Fixed bottom row keys in some layouts

* Fixed Grave and Tilde

* Fixed Underglow in Kona Classic configs

* Renamed KonaClassic to kona_classic
7 years ago