adds the gh80_3000 project (#2132)

pjrc_hid
farmakon 7 years ago committed by Jack Humbert
parent 41d5d3e655
commit d9983082c2

@ -0,0 +1,58 @@
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x3000
#define DEVICE_VER 0x0001
#define MANUFACTURER farmakon
#define PRODUCT GH80-3000
#define DESCRIPTION GH80-3000 Mechanical Keyboard
/* key matrix size */
#define MATRIX_ROWS 11
#define MATRIX_COLS 11
/* key matrix pins */
#define MATRIX_ROW_PINS { F4, F1, F0, F5, F6, F7, D4, D5, D3, D2, D0 }
#define MATRIX_COL_PINS { C7, C6, B4, D7, B3, B2, B0, E6, B1, D1, D6 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* number of backlight levels */
#ifdef BACKLIGHT_PIN
#define BACKLIGHT_LEVELS 0
#endif
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* prevent stuck modifiers */
#define PREVENT_STUCK_MODIFIERS
#ifdef RGB_DI_PIN
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 0
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#endif
#endif

@ -0,0 +1 @@
#include "gh80_3000.h"

@ -0,0 +1,138 @@
#ifndef GH80_3000
#define GH80_3000
#include "quantum.h"
// default keymap: all 117 keys with ANSI Enter
#define KEYMAP( \
K000, K001, K002, K003, K300, K301, K302, K303, K306, K307, K308, K309, K310, K004, K005, K006, K007, K008, K009, K010, \
K100, K101, K102, K103, K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K104, K105, K106, K107, K108, K109, K110, \
K200, K201, K202, K203, K500, K501, K502, K503, K505, K506, K507, K508, K509, K510, K204, K205, K206, K207, K208, K209, K210, \
K800, K801, K802, K803, K600, K601, K602, K603, K606, K607, K608, K609, K610, K807, K808, K809, K810, \
K900, K901, K902, K903, K700, K701, K702, K703, K705, K706, K707, K708, K709, K710, K906, K907, K908, K909, K910, \
KA00, KA01, KA02, KA03, K804, K805, K806, K604, K605, K904, K905, KA04, KA05, KA06, KA07, KA08, KA09, KA10 \
) { \
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010 }, \
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110 }, \
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210 }, \
{ K300, K301, K302, K303, KC_NO, KC_NO, K306, K307, K308, K309, K310 }, \
{ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410 }, \
{ K500, K501, K502, K503, KC_NO, K505, K506, K507, K508, K509, K510 }, \
{ K600, K601, K602, K603, K604, K605, K606, K607, K608, K609, K610 }, \
{ K700, K701, K702, K703, KC_NO, K705, K706, K707, K708, K709, K710 }, \
{ K800, K801, K802, K803, K804, K805, K806, K807, K808, K809, K810 }, \
{ K900, K901, K902, K903, K904, K905, K906, K907, K908, K909, K910 }, \
{ KA00, KA01, KA02, KA03, KA04, KA05, KA06, KA07, KA08, KA09, KA10 } \
}
// default ISO keymap: all 117 keys with ISO Enter
#define KEYMAP_ISO( \
K000, K001, K002, K003, K300, K301, K302, K303, K306, K307, K308, K309, K310, K004, K005, K006, K007, K008, K009, K010, \
K100, K101, K102, K103, K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K104, K105, K106, K107, K108, K109, K110, \
K200, K201, K202, K203, K500, K501, K502, K503, K505, K506, K507, K508, K509, K204, K205, K206, K207, K208, K209, K210, \
K800, K801, K802, K803, K600, K601, K602, K603, K606, K607, K608, K609, K510, K610, K807, K808, K809, K810, \
K900, K901, K902, K903, K700, K701, K702, K703, K705, K706, K707, K708, K709, K710, K906, K907, K908, K909, K910, \
KA00, KA01, KA02, KA03, K804, K805, K806, K604, K605, K904, K905, KA04, KA05, KA06, KA07, KA08, KA09, KA10 \
) { \
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010 }, \
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110 }, \
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210 }, \
{ K300, K301, K302, K303, KC_NO, KC_NO, K306, K307, K308, K309, K310 }, \
{ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410 }, \
{ K500, K501, K502, K503, KC_NO, K505, K506, K507, K508, K509, K510 }, \
{ K600, K601, K602, K603, K604, K605, K606, K607, K608, K609, K610 }, \
{ K700, K701, K702, K703, KC_NO, K705, K706, K707, K708, K709, K710 }, \
{ K800, K801, K802, K803, K804, K805, K806, K807, K808, K809, K810 }, \
{ K900, K901, K902, K903, K904, K905, K906, K907, K908, K909, K910 }, \
{ KA00, KA01, KA02, KA03, KA04, KA05, KA06, KA07, KA08, KA09, KA10 } \
}
// Standard ANSI Keyboard
#define ANSI_STD( \
K000, K001, K002, K003, K300, K301, K302, K303, K306, K307, K308, K309, K310, K004, K005, K006, \
K100, K101, K102, K103, K400, K401, K402, K403, K404, K405, K406, K407, K408, K410, K104, K105, K106, K107, K108, K109, K110, \
K200, K201, K202, K203, K500, K501, K502, K503, K505, K506, K507, K508, K509, K510, K204, K205, K206, K207, K208, K209, \
K800, K801, K802, K803, K600, K601, K602, K603, K606, K607, K608, K609, K610, K807, K808, K809, K810, \
K900, K902, K903, K700, K701, K702, K703, K705, K706, K707, K708, K709, K906, K907, K908, K909, \
KA00, KA01, KA02, K805, K604, K605, K904, K905, KA04, KA05, KA06, KA07, KA09, KA10 \
) { \
{ K000, K001, K002, K003, K004, K005, K006, KC_NO, KC_NO, KC_NO, KC_NO }, \
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110 }, \
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, KC_NO }, \
{ K300, K301, K302, K303, KC_NO, KC_NO, K306, K307, K308, K309, K310 }, \
{ K400, K401, K402, K403, K404, K405, K406, K407, K408, KC_NO, K410 }, \
{ K500, K501, K502, K503, KC_NO, K505, K506, K507, K508, K509, K510 }, \
{ K600, K601, K602, K603, K604, K605, K606, K607, K608, K609, K610 }, \
{ K700, K701, K702, K703, KC_NO, K705, K706, K707, K708, K709, KC_NO }, \
{ K800, K801, K802, K803, KC_NO, K805, KC_NO, K807, K808, K809, K810 }, \
{ K900, KC_NO, K902, K903, K904, K905, K906, K907, K908, K909, KC_NO }, \
{ KA00, KA01, KA02, KC_NO, KA04, KA05, KA06, KA07, KC_NO, KA09, KA10 } \
}
// Standard ISO Keyboard
#define ISO_STD( \
K000, K001, K002, K003, K300, K301, K302, K303, K306, K307, K308, K309, K310, K004, K005, K006, \
K100, K101, K102, K103, K400, K401, K402, K403, K404, K405, K406, K407, K408, K410, K104, K105, K106, K107, K108, K109, K110, \
K200, K201, K202, K203, K500, K501, K502, K503, K505, K506, K507, K508, K509, K204, K205, K206, K207, K208, K209, \
K800, K801, K802, K803, K600, K601, K602, K603, K606, K607, K608, K609, K510, K610, K807, K808, K809, K810, \
K900, K901, K902, K903, K700, K701, K702, K703, K705, K706, K707, K708, K709, K906, K907, K908, K909, \
KA00, KA01, KA02, K805, K604, K605, K904, K905, KA04, KA05, KA06, KA07, KA09, KA10 \
) { \
{ K000, K001, K002, K003, K004, K005, K006, KC_NO, KC_NO, KC_NO, KC_NO }, \
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110 }, \
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, KC_NO }, \
{ K300, K301, K302, K303, KC_NO, KC_NO, K306, K307, K308, K309, K310 }, \
{ K400, K401, K402, K403, K404, K405, K406, K407, K408, KC_NO, K410 }, \
{ K500, K501, K502, K503, KC_NO, K505, K506, K507, K508, K509, K510 }, \
{ K600, K601, K602, K603, K604, K605, K606, K607, K608, K609, K610 }, \
{ K700, K701, K702, K703, KC_NO, K705, K706, K707, K708, K709, KC_NO }, \
{ K800, K801, K802, K803, KC_NO, K805, KC_NO, K807, K808, K809, K810 }, \
{ K900, K901, K902, K903, K904, K905, K906, K907, K908, K909, KC_NO }, \
{ KA00, KA01, KA02, KC_NO, KA04, KA05, KA06, KA07, KC_NO, KA09, KA10 } \
}
// Winkeyless ANSI Keyboard
#define ANSI_WKL( \
K000, K001, K002, K003, K300, K301, K302, K303, K306, K307, K308, K309, K310, K004, K005, K006, \
K100, K101, K102, K103, K400, K401, K402, K403, K404, K405, K406, K407, K408, K410, K104, K105, K106, K107, K108, K109, K110, \
K200, K201, K202, K203, K500, K501, K502, K503, K505, K506, K507, K508, K509, K510, K204, K205, K206, K207, K208, K209, \
K800, K801, K802, K803, K600, K601, K602, K603, K606, K607, K608, K609, K610, K807, K808, K809, K810, \
K900, K902, K903, K700, K701, K702, K703, K705, K706, K707, K708, K709, K906, K907, K908, K909, \
KA00, KA02, K805, K605, K905, KA04, KA05, KA06, KA07, KA09, KA10 \
) { \
{ K000, K001, K002, K003, K004, K005, K006, KC_NO, KC_NO, KC_NO, KC_NO }, \
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110 }, \
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, KC_NO }, \
{ K300, K301, K302, K303, KC_NO, KC_NO, K306, K307, K308, K309, K310 }, \
{ K400, K401, K402, K403, K404, K405, K406, K407, K408, KC_NO, K410 }, \
{ K500, K501, K502, K503, KC_NO, K505, K506, K507, K508, K509, K510 }, \
{ K600, K601, K602, K603, KC_NO, K605, K606, K607, K608, K609, K610 }, \
{ K700, K701, K702, K703, KC_NO, K705, K706, K707, K708, K709, KC_NO }, \
{ K800, K801, K802, K803, KC_NO, K805, KC_NO, K807, K808, K809, K810 }, \
{ K900, KC_NO, K902, K903, KC_NO, K905, K906, K907, K908, K909, KC_NO }, \
{ KA00, KC_NO, KA02, KC_NO, KA04, KA05, KA06, KA07, KC_NO, KA09, KA10 } \
}
// Winkeyless ISO Keyboard
#define ISO_WKL( \
K000, K001, K002, K003, K300, K301, K302, K303, K306, K307, K308, K309, K310, K004, K005, K006, \
K100, K101, K102, K103, K400, K401, K402, K403, K404, K405, K406, K407, K408, K410, K104, K105, K106, K107, K108, K109, K110, \
K200, K201, K202, K203, K500, K501, K502, K503, K505, K506, K507, K508, K509, K204, K205, K206, K207, K208, K209, \
K800, K801, K802, K803, K600, K601, K602, K603, K606, K607, K608, K609, K510, K610, K807, K808, K809, K810, \
K900, K901, K902, K903, K700, K701, K702, K703, K705, K706, K707, K708, K709, K906, K907, K908, K909, \
KA00, KA02, K805, K605, K905, KA04, KA05, KA06, KA07, KA09, KA10 \
) { \
{ K000, K001, K002, K003, K004, K005, K006, KC_NO, KC_NO, KC_NO, KC_NO }, \
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110 }, \
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, KC_NO }, \
{ K300, K301, K302, K303, KC_NO, KC_NO, K306, K307, K308, K309, K310 }, \
{ K400, K401, K402, K403, K404, K405, K406, K407, K408, KC_NO, K410 }, \
{ K500, K501, K502, K503, KC_NO, K505, K506, K507, K508, K509, K510 }, \
{ K600, K601, K602, K603, KC_NO, K605, K606, K607, K608, K609, K610 }, \
{ K700, K701, K702, K703, KC_NO, K705, K706, K707, K708, K709, KC_NO }, \
{ K800, K801, K802, K803, KC_NO, K805, KC_NO, K807, K808, K809, K810 }, \
{ K900, K901, K902, K903, KC_NO, K905, K906, K907, K908, K909, KC_NO }, \
{ KA00, KC_NO, KA02, KC_NO, KA04, KA05, KA06, KA07, KC_NO, KA09, KA10 } \
}
#endif

@ -0,0 +1,34 @@
#include "gh80_3000.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
ANSI_STD(\
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL, KC_BSPC, KC_INS,KC_HOME, KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, \
KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0, KC_PDOT, KC_PENT
)
};
void led_set_user(uint8_t usb_led) {
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
DDRB |= (1 << 5); PORTB &= ~(1 << 5);
} else {
DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
}
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
DDRB |= (1 << 6); PORTB &= ~(1 << 6);
} else {
DDRB &= ~(1 << 6); PORTB &= ~(1 << 6);
}
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
DDRB |= (1 << 7); PORTB &= ~(1 << 7);
} else {
DDRB &= ~(1 << 7); PORTB &= ~(1 << 7);
}
}

@ -0,0 +1,34 @@
#include "gh80_3000.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
ANSI_WKL(\
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL, KC_BSPC, KC_INS,KC_HOME, KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, \
KC_LCTL, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0, KC_PDOT, KC_PENT
)
};
void led_set_user(uint8_t usb_led) {
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
DDRB |= (1 << 5); PORTB &= ~(1 << 5);
} else {
DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
}
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
DDRB |= (1 << 6); PORTB &= ~(1 << 6);
} else {
DDRB &= ~(1 << 6); PORTB &= ~(1 << 6);
}
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
DDRB |= (1 << 7); PORTB &= ~(1 << 7);
} else {
DDRB &= ~(1 << 7); PORTB &= ~(1 << 7);
}
}

@ -0,0 +1,34 @@
#include "gh80_3000.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KEYMAP(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_MPLY, KC_MPRV, KC_MNXT, KC_MUTE, \
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_BSPC, KC_INS,KC_HOME, KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \
KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, \
KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0, KC_PCMM, KC_PDOT, KC_PENT
)
};
void led_set_user(uint8_t usb_led) {
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
DDRB |= (1 << 5); PORTB &= ~(1 << 5);
} else {
DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
}
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
DDRB |= (1 << 6); PORTB &= ~(1 << 6);
} else {
DDRB &= ~(1 << 6); PORTB &= ~(1 << 6);
}
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
DDRB |= (1 << 7); PORTB &= ~(1 << 7);
} else {
DDRB &= ~(1 << 7); PORTB &= ~(1 << 7);
}
}

@ -0,0 +1,34 @@
#include "gh80_3000.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KEYMAP_ISO(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_MPLY, KC_MPRV, KC_MNXT, KC_MUTE, \
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_BSLS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \
KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, \
KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0, KC_PCMM, KC_PDOT, KC_PENT
)
};
void led_set_user(uint8_t usb_led) {
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
DDRB |= (1 << 5); PORTB &= ~(1 << 5);
} else {
DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
}
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
DDRB |= (1 << 6); PORTB &= ~(1 << 6);
} else {
DDRB &= ~(1 << 6); PORTB &= ~(1 << 6);
}
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
DDRB |= (1 << 7); PORTB &= ~(1 << 7);
} else {
DDRB &= ~(1 << 7); PORTB &= ~(1 << 7);
}
}

@ -0,0 +1,34 @@
#include "gh80_3000.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
ISO_STD(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_BSLS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \
KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, \
KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0, KC_PDOT, KC_PENT
)
};
void led_set_user(uint8_t usb_led) {
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
DDRB |= (1 << 5); PORTB &= ~(1 << 5);
} else {
DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
}
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
DDRB |= (1 << 6); PORTB &= ~(1 << 6);
} else {
DDRB &= ~(1 << 6); PORTB &= ~(1 << 6);
}
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
DDRB |= (1 << 7); PORTB &= ~(1 << 7);
} else {
DDRB &= ~(1 << 7); PORTB &= ~(1 << 7);
}
}

@ -0,0 +1,34 @@
#include "gh80_3000.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
ISO_WKL(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_BSLS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \
KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, \
KC_LCTL, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0, KC_PDOT, KC_PENT
)
};
void led_set_user(uint8_t usb_led) {
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
DDRB |= (1 << 5); PORTB &= ~(1 << 5);
} else {
DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
}
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
DDRB |= (1 << 6); PORTB &= ~(1 << 6);
} else {
DDRB &= ~(1 << 6); PORTB &= ~(1 << 6);
}
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
DDRB |= (1 << 7); PORTB &= ~(1 << 7);
} else {
DDRB &= ~(1 << 7); PORTB &= ~(1 << 7);
}
}

@ -0,0 +1,15 @@
GH80-3000
========
Cherry Corp. G80-3000 replacement PCB with support for split keys.
Schematic and PCB are available opensource under Creative Commons BY-SA 3.0 license on EasyEDA at [this link](https://easyeda.com/farmakon/GH80_3000-4f3cee521afd4be3858c4b5cc3b76f9e)
For more informations please visit this [geekhack.org thread](https://geekhack.org/index.php?topic=92962)
Make example for this keyboard (after setting up your build environment):
make gh80_3000:default
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

@ -0,0 +1,56 @@
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
CONSOLE_ENABLE ?= no # Console for debug(+400)
COMMAND_ENABLE ?= no # Commands for debug and configuration
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality
AUDIO_ENABLE ?= no
RGBLIGHT_ENABLE ?= no
Loading…
Cancel
Save