Fix reset for STM32 devices

keyboards/clueboard/60/boards/GENERIC_STM32_F303XC/board.c

@@ -62,13 +62,15 @@ const PALConfig pal_default_config = {
 };
 #endif
 
+void enter_bootloader_mode_if_requested(void);
+
 /**
  * @brief   Early initialization code.
  * @details This initialization must be performed just after stack setup
  *          and before any other initialization.
  */
 void __early_init(void) {
-
+  enter_bootloader_mode_if_requested();
   stm32_clock_init();
 }
 

keyboards/clueboard/60/boards/GENERIC_STM32_F303XC/board.h

@@ -1164,14 +1164,14 @@
 /*
  * USB bus activation macro, required by the USB driver.
  */
-// #define usb_lld_connect_bus(usbp) 
+// #define usb_lld_connect_bus(usbp)
 #define usb_lld_connect_bus(usbp) (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_ALTERNATE(14)))
 // #define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT)
 /*
  * USB bus de-activation macro, required by the USB driver.
  */
 // #define usb_lld_disconnect_bus(usbp)
-#define usb_lld_disconnect_bus(usbp) (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_OUTPUT_PUSHPULL))
+#define usb_lld_disconnect_bus(usbp) (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_OUTPUT_PUSHPULL)); palClearPad(GPIOA, GPIOA_USB_DP)
 // #define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12)
 
 #if !defined(_FROM_ASM_)

keyboards/clueboard/60/rules.mk

@@ -37,7 +37,7 @@ USE_FPU = yes
 OPT_DEFS =
 
 # Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000 -R
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
 
 # Build Options
 #   comment out to disable the options.

tmk_core/common/chibios/bootloader.c

@@ -6,32 +6,32 @@
 #ifdef STM32_BOOTLOADER_ADDRESS
 /* STM32 */
 
-#if defined(STM32F0XX)
 /* This code should be checked whether it runs correctly on platforms */
 #define SYMVAL(sym) (uint32_t)(((uint8_t *)&(sym)) - ((uint8_t *)0))
 extern uint32_t __ram0_end__;
+#define BOOTLOADER_MAGIC 0xDEADBEEF
+#define MAGIC_ADDR (unsigned long*)(SYMVAL(__ram0_end__) - 4)
 
-void bootloader_jump(void) {
-  *((unsigned long *)(SYMVAL(__ram0_end__) - 4)) = 0xDEADBEEF; // set magic flag => reset handler will jump into boot loader
-   NVIC_SystemReset();
-}
-
-#elif defined(STM32F3XX)
-/* This code should be checked whether it runs correctly on platforms. 
- * It was added for clueboard60 BUT HAS NOT BEEN TESTED.
- * FIXME - Test this
- */
-#define SYMVAL(sym) (uint32_t)(((uint8_t *)&(sym)) - ((uint8_t *)0))
-extern uint32_t __ram0_end__;
 
 void bootloader_jump(void) {
-  *((unsigned long *)(SYMVAL(__ram0_end__) - 4)) = 0xDEADBEEF; // set magic flag => reset handler will jump into boot loader
+  *MAGIC_ADDR = BOOTLOADER_MAGIC; // set magic flag => reset handler will jump into boot loader
    NVIC_SystemReset();
 }
 
-#else /* defined(STM32F0XX) */
-#error Check that the bootloader code works on your platform and add it to bootloader.c!
-#endif /* defined(STM32F0XX) */
+void enter_bootloader_mode_if_requested(void)  {
+  unsigned long* check = MAGIC_ADDR;
+  if(*check == BOOTLOADER_MAGIC)  {
+    *check = 0;
+    __set_CONTROL(0);
+    __set_MSP(*(__IO uint32_t*)STM32_BOOTLOADER_ADDRESS);
+    __enable_irq();
+
+    typedef void (*BootJump_t)(void);
+    BootJump_t boot_jump = *(BootJump_t*)(STM32_BOOTLOADER_ADDRESS + 4);
+    boot_jump();
+    while(1);
+  }
+ }
 
 #elif defined(KL2x) || defined(K20x) /* STM32_BOOTLOADER_ADDRESS */
 /* Kinetis */