media next/prev track buttons

the original macros have every possible switch position for the board,
but there are a handful of switch positions that I'm not using. It's not
actually possible to use them all at once, since some of them would
cause keys to collide. I removed the uneeded positions to fit my layout.

build_keyboard.mk

@@ -204,7 +204,11 @@ else
 endif
 
 # User space stuff
-USER_PATH := users/$(KEYMAP)
+ifeq ("$(USER_NAME)","")
+    USER_NAME := $(KEYMAP)
+endif
+USER_PATH := users/$(USER_NAME)
+
 -include $(USER_PATH)/rules.mk
 ifneq ("$(wildcard users/$(KEYMAP)/config.h)","")
     CONFIG_H += users/$(KEYMAP)/config.h

common_features.mk

@@ -34,6 +34,7 @@ ifeq ($(strip $(AUDIO_ENABLE)), yes)
     OPT_DEFS += -DAUDIO_ENABLE
     MUSIC_ENABLE := 1
     SRC += $(QUANTUM_DIR)/process_keycode/process_audio.c
+    SRC += $(QUANTUM_DIR)/process_keycode/process_clicky.c
     ifeq ($(PLATFORM),AVR)
         SRC += $(QUANTUM_DIR)/audio/audio.c
     else

docs/config_options.md

@@ -116,7 +116,7 @@ If you define these options you will enable the associated feature, which may in
 * `#define FORCE_NKRO`
   * NKRO by default requires to be turned on, this forces it on during keyboard startup regardless of EEPROM setting. NKRO can still be turned off but will be turned on again if the keyboard reboots.
 * `#define PREVENT_STUCK_MODIFIERS`
-  * when switching layers, this will release all mods
+  * stores the layer a key press came from so the same layer is used when the key is released, regardless of which layers are enabled
 
 ## Behaviors That Can Be Configured
 

docs/feature_advanced_keycodes.md

@@ -19,14 +19,15 @@ Currently, the keycodes able to used with these functions are limited to the [Ba
 
 # Switching and Toggling Layers
 
-These functions allow you to activate layers in various ways.
+These functions allow you to activate layers in various ways. Note that layers are not generally independent layouts -- multiple layers can be activated at once, and it's typical for layers to use `KC_TRNS` to allow keypresses to pass through to lower layers. For a detailed explanation of layers, see [Keymap Overview](keymap.md#keymap-and-layers)
 
-* `MO(layer)` - momentary switch to *layer*. As soon as you let go of the key, the layer is deactivated and you pop back out to the previous layer.
-* `LT(layer, kc)` - momentary switch to *layer* when held, and *kc* when tapped.
-* `TG(layer)` - toggles a layer on or off.
-* `TO(layer)` - Goes to a layer. This code is special, because it lets you go either up or down the stack -- just goes directly to the layer you want. So while other codes only let you go _up_ the stack (from layer 0 to layer 3, for example), `TO(2)` is going to get you to layer 2, no matter where you activate it from -- even if you're currently on layer 5. This gets activated on keydown (as soon as the key is pressed).
-* `TT(layer)` - Layer Tap-Toggle. If you hold the key down, the layer becomes active, and then deactivates when you let go. And if you repeatedly tap it, the layer simply becomes active (toggles on). It needs 5 taps by default, but you can set it by defining `TAPPING_TOGGLE`, for example, `#define TAPPING_TOGGLE 2` for just two taps.
-* `LM(layer, mod)` - Momentary switch to *layer* (like MO), but with modifier(s) *mod* active. Only supports layers 0-15 and the left modifiers.
+* `DF(layer)` - switches the default layer. The default layer is the always-active base layer that other layers stack on top of. See below for more about the default layer. This might be used to switch from QWERTY to Dvorak layout. (Note that this is a temporary switch that only persists until the keyboard loses power. To modify the default layer in a persistent way requires deeper customization, such as calling the `set_single_persistent_default_layer` function inside of [process_record_user](custom_quantum_functions.md#programming-the-behavior-of-any-keycode).)
+* `MO(layer)` - momentarily activates *layer*. As soon as you let go of the key, the layer is deactivated. 
+* `LM(layer, mod)` - Momentarily activates *layer* (like `MO`), but with modifier(s) *mod* active. Only supports layers 0-15 and the left modifiers.
+* `LT(layer, kc)` - momentarily activates *layer* when held, and sends *kc* when tapped.
+* `TG(layer)` - toggles *layer*, activating it if it's inactive and vice versa
+* `TO(layer)` - activates *layer* and de-activates all other layers (except your default layer). This function is special, because instead of just adding/removing one layer to your active layer stack, it will completely replace your current active layers, uniquely allowing you to replace higher layers with a lower one. This is activated on keydown (as soon as the key is pressed).
+* `TT(layer)` - Layer Tap-Toggle. If you hold the key down, *layer* is activated, and then is de-activated when you let go (like `MO`). If you repeatedly tap it, the layer will be toggled on or off (like `TG`). It needs 5 taps by default, but you can change this by defining `TAPPING_TOGGLE` -- for example, `#define TAPPING_TOGGLE 2` to toggle on just two taps.
 
 # Working with Layers
 
@@ -36,9 +37,9 @@ Care must be taken when switching layers, it's possible to lock yourself into a
 
 If you are just getting started with QMK you will want to keep everything simple. Follow these guidelines when setting up your layers:
 
-* Setup layer 0 as your "base" layer. This is your normal typing layer, and could be whatever layout you want (qwerty, dvorak, colemak, etc.)
+* Setup layer 0 as your default, "base" layer. This is your normal typing layer, and could be whatever layout you want (qwerty, dvorak, colemak, etc.). It's important to set this as the lowest layer since it will typically have most or all of the keyboard's keys defined, so would block other layers from having any effect if it were above them (i.e., had a higher layer number). 
 * Arrange your layers in a "tree" layout, with layer 0 as the root. Do not try to enter the same layer from more than one other layer.
-* Never try to stack a higher numbered layer on top of a lower numbered layer. Doing so is tricky and error prone.
+* In a layer's keymap, only reference higher-numbered layers. Because layers are processed from the highest-numbered (topmost) active layer down, modifying the state of lower layers can be tricky and error-prone.
 
 ### Intermediate Users
 

docs/feature_audio.md

@@ -97,6 +97,36 @@ You can completely disable Music Mode as well. This is useful, if you're pressed
 
     #define NO_MUSIC_MODE
 
+## Faux Click
+
+This adds a click sound each time you hit a button, to simulate click sounds from the keyboard. And the sounds are slightly different for each keypress, so it doesn't sound like a single long note, if you type rapidly. 
+
+* `CK_TOGG` - Toggles the status (will play sound if enabled)
+* `CK_RST` - Resets the frequency to the default state 
+* `CK_UP` - Increases the frequency of the clicks
+* `CK_DOWN` - Decreases the frequency of the clicks
+
+The feature is disabled by default, to save space.  To enable it, add this to your `config.h`:
+
+    #define AUDIO_CLICKY
+
+Additionally, even when enabled, the feature is not enabled by default, so you would need to turn it on first.  And since we don't use EEPROM to store the setting (yet), you can default this to on by adding this to your `config.h`:
+
+    #define AUDIO_CLICKY_ON
+
+You can configure the default, min and max frequencies, the stepping and built in randomness by defining these values: 
+
+| Option | Default Value | Description |
+|--------|---------------|-------------|
+| `AUDIO_CLICKY_FREQ_DEFAULT` | 440.0f | Sets the default/starting audio frequency for the clicky sounds. |
+| `AUDIO_CLICKY_FREQ_MIN` | 65.0f | Sets the lowest frequency (under 60f are a bit buggy). |
+| `AUDIO_CLICKY_FREQ_MAX` | 1500.0f | Sets the the highest frequency. Too high may result in coworkers attacking you. |
+| `AUDIO_CLICKY_FREQ_FACTOR` | 1.18921f| Sets the stepping of UP/DOWN key codes. |
+| `AUDIO_CLICKY_FREQ_RANDOMNESS`     |  0.05f |  Sets a factor of randomness for the clicks, Setting this to `0f` will make each click identical. | 
+
+
+
+
 ## MIDI Functionality
 
 This is still a WIP, but check out `quantum/keymap_midi.c` to see what's happening. Enable from the Makefile.

docs/feature_tap_dance.md

@@ -22,7 +22,7 @@ This array specifies what actions shall be taken when a tap-dance key is in acti
 * `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in the user keymap - with the final tap count of the tap dance action.
 * `ACTION_TAP_DANCE_FN_ADVANCED(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn)`: Calls the first specified function - defined in the user keymap - on every tap, the second function on when the dance action finishes (like the previous option), and the last function when the tap dance action resets.
 
-The first option is enough for a lot of cases, that just want dual roles. For example, `ACTION_TAP_DANCE(KC_SPC, KC_ENT)` will result in `Space` being sent on single-tap, `Enter` otherwise.
+The first option is enough for a lot of cases, that just want dual roles. For example, `ACTION_TAP_DANCE_DOUBLE(KC_SPC, KC_ENT)` will result in `Space` being sent on single-tap, `Enter` otherwise.
 
 And that's the bulk of it!
 

docs/feature_userspace.md

@@ -25,19 +25,19 @@ For example,
 
 Will include the `/users/jack/` folder in the path, along with `/users/jack/rules.mk`.
 
-Additionally, `config.h` here will be processed like the same file in your keymap folder.  This is handled separately from the `<name>.h` file.  
+Additionally, `config.h` here will be processed like the same file in your keymap folder.  This is handled separately from the `<name>.h` file.
 
-The reason for this, is that `<name>.h` won't be added in time to add settings (such as `#define TAPPING_TERM 100`), and including the `<name.h>` file in any `config.h` files will result in compile issues. 
+The reason for this, is that `<name>.h` won't be added in time to add settings (such as `#define TAPPING_TERM 100`), and including the `<name.h>` file in any `config.h` files will result in compile issues.
+
+So you should use the `config.h` for QMK settings, and the `<name>.h` file for user or keymap specific settings.
 
-So you should use the `config.h` for QMK settings, and the `<name>.h` file for user or keymap specific settings. 
- 
 ## Readme
 
 Please include authorship (your name, github username, email), and optionally [a license that's GPL compatible](https://www.gnu.org/licenses/license-list.html#GPLCompatibleLicenses).
 
 ## `Config.h`
 
-If you do add a `config,h` file, you want to make sure that it only gets processed once.  So you may want to start off with something like this: 
+If you do add a `config,h` file, you want to make sure that it only gets processed once.  So you may want to start off with something like this:
 
 ```c
 #ifndef USERSPACE_CONFIG_H
@@ -48,7 +48,7 @@ If you do add a `config,h` file, you want to make sure that it only gets process
 #endif // !USERSPACE_CONFIG_H
 ```
 
-You can use any option hre that you could use in your keymap's `config.h` file. You can find a list of vales [here](config_options.md). 
+You can use any option hre that you could use in your keymap's `config.h` file. You can find a list of vales [here](config_options.md).
 
 ## Example
 
@@ -115,3 +115,11 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 This will add a new `KC_MAKE`  keycode that can be used in any of your keymaps.  And this keycode will output `make <keyboard>:<keymap">`, making frequent compiling easier.  And this will work with any keyboard and any keymap as it will output the current boards info, so that you don't have to type this out every time.
 
 Additionally, this should flash the newly compiled firmware automatically, using the correct utility, based on the bootloader settings (or default to just generating the HEX file). However, it should be noted that this may not work on all systems. AVRDUDE doesn't work on WSL, namely (and will dump the HEX in the ".build" folder instead).
+
+## Override default userspace
+
+By default the userspace used will be the same as the keymap name. In some situations this isn't desirable. For instance, if you use the [layout](feature_layouts.md) feature you can't use the same name for different keymaps (e.g. ANSI and ISO). You can name your layouts `mylayout-ansi` and `mylayout-iso` and add the following line to your layout's `rules.mk`:
+
+```
+USER_NAME := mylayout
+```

docs/flashing.md

@@ -20,7 +20,7 @@ Compatible flashers:
 
 * [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) (recommended GUI)
 * [dfu-programmer](https://github.com/dfu-programmer/dfu-programmer) / `:dfu` in QMK (recommended command line)
-* [Atmel's Flip](http://www.atmel.com/tools/flip.aspx) (not recommended)
+* [Atmel's Flip](http://www.microchip.com/developmenttools/productdetails.aspx?partno=flip) (not recommended)
 
 Flashing sequence:
 

keyboards/1up60rgb/1up60rgb.h

@@ -3,7 +3,7 @@
 
 #include "quantum.h"
 
-#define KEYMAP( \
+#define LAYOUT_all( \
 	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
 	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
 	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \
@@ -17,4 +17,50 @@
 	{ K400,  K401,  KC_NO, K403,  KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  KC_NO, K413,  K414 }  \
 }
 
-#endif
+
+/* ANSI variant. No extra keys for ISO */
+#define LAYOUT_60_ansi( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,       K013, \
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, \
+	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,             K313, \
+	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
+) LAYOUT_all( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K013,\
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, K214, \
+	K300, KC_NO,K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, KC_NO,\
+	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
+)
+
+/* ISO variant. Remove useless ANSI keys */
+#define LAYOUT_60_iso( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,       K013, \
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,             K313, \
+	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
+) LAYOUT_all( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K013,\
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K214, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, KC_NO,\
+	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
+)
+
+/* HHKB Variant */
+#define LAYOUT_60_ansi_split_bs_rshift( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, \
+	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
+	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
+) LAYOUT_all( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014,\
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, K214, \
+	K300, KC_NO,K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314,\
+	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
+)
+
+#endif

keyboards/1up60rgb/info.json

@@ -5,8 +5,20 @@
   "width": 15,
   "height": 5,
   "layouts": {
-      "KEYMAP": {
-          "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"~", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
-      }
+    "LAYOUT_all": {
+      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"~", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+    },
+
+    "LAYOUT_60_ansi": {
+      "layout": [{"x":0, "y":0, "label":"~"}, {"x":1, "y":0, "label":"!"}, {"x":2, "y":0, "label":"@"}, {"x":3, "y":0, "label":"#"}, {"x":4, "y":0, "label":"$"}, {"x":5, "y":0, "label":"%"}, {"x":6, "y":0, "label":"^"}, {"x":7, "y":0, "label":"&"}, {"x":8, "y":0, "label":"*"}, {"x":9, "y":0, "label":"("}, {"x":10, "y":0, "label":")"}, {"x":11, "y":0, "label":"_"}, {"x":12, "y":0, "label":"+"}, {"x":13, "y":0, "label":"Backspace", "w":2}, {"x":0, "y":1, "label":"Tab", "w":1.5}, {"x":1.5, "y":1, "label":"Q"}, {"x":2.5, "y":1, "label":"W"}, {"x":3.5, "y":1, "label":"E"}, {"x":4.5, "y":1, "label":"R"}, {"x":5.5, "y":1, "label":"T"}, {"x":6.5, "y":1, "label":"Y"}, {"x":7.5, "y":1, "label":"U"}, {"x":8.5, "y":1, "label":"I"}, {"x":9.5, "y":1, "label":"O"}, {"x":10.5, "y":1, "label":"P"}, {"x":11.5, "y":1, "label":"{"}, {"x":12.5, "y":1, "label":"}"}, {"x":13.5, "y":1, "label":"|", "w":1.5}, {"x":0, "y":2, "label":"Caps Lock", "w":1.75}, {"x":1.75, "y":2, "label":"A"}, {"x":2.75, "y":2, "label":"S"}, {"x":3.75, "y":2, "label":"D"}, {"x":4.75, "y":2, "label":"F"}, {"x":5.75, "y":2, "label":"G"}, {"x":6.75, "y":2, "label":"H"}, {"x":7.75, "y":2, "label":"J"}, {"x":8.75, "y":2, "label":"K"}, {"x":9.75, "y":2, "label":"L"}, {"x":10.75, "y":2, "label":":"}, {"x":11.75, "y":2, "label":"\""}, {"x":12.75, "y":2, "label":"Enter", "w":2.25}, {"x":0, "y":3, "label":"Shift", "w":2.25}, {"x":2.25, "y":3, "label":"Z"}, {"x":3.25, "y":3, "label":"X"}, {"x":4.25, "y":3, "label":"C"}, {"x":5.25, "y":3, "label":"V"}, {"x":6.25, "y":3, "label":"B"}, {"x":7.25, "y":3, "label":"N"}, {"x":8.25, "y":3, "label":"M"}, {"x":9.25, "y":3, "label":"<"}, {"x":10.25, "y":3, "label":">"}, {"x":11.25, "y":3, "label":"?"}, {"x":12.25, "y":3, "label":"Shift", "w":2.75}, {"x":0, "y":4, "label":"Ctrl", "w":1.25}, {"x":1.25, "y":4, "label":"Win", "w":1.25}, {"x":2.5, "y":4, "label":"Alt", "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "label":"Alt", "w":1.25}, {"x":11.25, "y":4, "label":"Win", "w":1.25}, {"x":12.5, "y":4, "label":"Menu", "w":1.25}, {"x":13.75, "y":4, "label":"Ctrl", "w":1.25}]
+    },
+
+    "LAYOUT_60_iso": {
+      "layout": [{"label":"\u00ac", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+    },
+
+    "LAYOUT_60_ansi_split_bs_rshift": {
+      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":6}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"label":"Win", "x":11.5, "y":4}, {"label":"Menu", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]
+    }
   }
 }

keyboards/1up60rgb/keymaps/default/keymap.c

@@ -2,14 +2,14 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	KEYMAP(
+	LAYOUT_all(
 		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
 		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
 		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT,
 		KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT,
 		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL),
 
-	KEYMAP(
+	LAYOUT_all(
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,

keyboards/1up60rgb/keymaps/iso/keymap.c

@@ -2,14 +2,14 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	KEYMAP(
+	LAYOUT_all(
 		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
 		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT,
 		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
 		KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT,
 		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL),
 
-	KEYMAP(
+	LAYOUT_all(
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,

keyboards/1up60rgb/keymaps/tsangan/keymap.c

@@ -2,14 +2,14 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	KEYMAP(
+	LAYOUT_all(
 		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV,
 		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
 		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT,
 		KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
 		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, KC_RALT, KC_RGUI, KC_RCTL),
 
-	KEYMAP(
+	LAYOUT_all(
 		RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL,
 		KC_TRNS, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_UP, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_RGHT, KC_TRNS, KC_TRNS,

keyboards/1up60rgb/rules.mk

@@ -53,4 +53,6 @@ SLEEP_LED_ENABLE ?= no  # Breathing sleep LED during USB suspend
 NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
 AUDIO_ENABLE ?= no
-RGBLIGHT_ENABLE ?= yes
+RGBLIGHT_ENABLE ?= yes
+
+LAYOUTS = 60_ansi 60_iso 60_ansi_split_bs_rshift

keyboards/alf_x2/alf_x2.c

@@ -0,0 +1 @@
+#include "alf_x2.h"

keyboards/alf_x2/alf_x2.h

@@ -0,0 +1,92 @@
+#ifndef ALF_X2_H
+#define ALF_X2_H
+
+#include "quantum.h"
+
+// K404 and K408 are the microswitches at the top of the PCB
+
+#define LAYOUT( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \
+	K400, K401,       K403, K404,       K406,       K408,       K410, K411, K412, K413, K414  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
+	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
+	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  K314 }, \
+	{ K400,  K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412,  K413,  K414 }  \
+}
+
+#define LAYOUT_std_ansi( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,       K014, \
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
+	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313,  \
+	K400, K401,       K403, K404,       K406,       K408,       K410, K411,        K413, K414  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  KC_NO,  K014 }, \
+	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
+	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
+	{ K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO,  K313,  KC_NO }, \
+	{ K400,  K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  KC_NO,  K413,  K414 }  \
+}
+
+#define LAYOUT_std_splits( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314,\
+	K400, K401,       K403, K404,       K406,       K408,       K410, K411,       K413, K414  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
+	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
+	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314 }, \
+	{ K400,  K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  KC_NO, K413,  K414 }  \
+}
+
+#define LAYOUT_hhkb( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
+	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314,\
+	      K401,       K403, K404,       K406,       K408,       K410, K411        \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
+	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
+	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
+	{ K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314 }, \
+	{ KC_NO, K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  KC_NO, KC_NO, KC_NO }  \
+}
+
+#define LAYOUT_2u_split_arrows( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314,\
+	K400, K401,       K403, K404,       K406,       K408,       K410, K411, K412, K413, K414  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012, K013,  K014 }, \
+	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112, K113,  K114 }, \
+	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212, K213,  KC_NO }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312, K313,  K314 }, \
+	{ K400,  K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412, K413,  K414 }  \
+}
+
+#define LAYOUT_split_arrows( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314,\
+	K400, K401,       K403, K404,       K406,       K408,       K410, K411, K412, K413, K414  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
+	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
+	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_N), K313,  K314 }, \
+	{ K400,  K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412,  K413,  K414 }  \
+}
+
+#endif

keyboards/alf_x2/config.h

@@ -0,0 +1,58 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    ALF
+#define PRODUCT         X2
+#define DESCRIPTION     ALF X2 60
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3, F4 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B6
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 4
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif

keyboards/alf_x2/info.json

@@ -0,0 +1,32 @@
+{
+    "keyboard_name": "ALF X2", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 15.0, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3}, {"x":1, "y":3}, {"label":"Z", "x":2, "y":3}, {"label":"X", "x":3, "y":3}, {"label":"C", "x":4, "y":3}, {"label":"V", "x":5, "y":3}, {"label":"B", "x":6, "y":3}, {"label":"N", "x":7, "y":3}, {"label":"M", "x":8, "y":3}, {"label":"<", "x":9, "y":3}, {"label":">", "x":10, "y":3}, {"label":"?", "x":11, "y":3}, {"x":12, "y":3}, {"label":"Shift", "x":13, "y":3}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":4.25, "y":4, "w":1.3}, {"x":6.0, "y":4, "w":2}, {"x":8.5, "y":4, "w":1.3}, {"label":"Alt", "x":10.0, "y":4}, {"label":"Alt", "x":11.0, "y":4}, {"label":"Win", "x":12.0, "y":4}, {"label":"Menu", "x":13.0, "y":4}, {"label":"Ctrl", "x":14.0, "y":4}]
+        },
+
+        "LAYOUT_std_ansi": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":4.25, "y":4}, {"x":5.5, "y":4, "w":2.75}, {"x":8.5, "y":4}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+        },
+
+        "LAYOUT_hhkb": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Win", "x":1.75, "y":4, "w":1.25}, {"label":"Alt", "x":3, "y":4, "w":1.25}, {"x":4.75, "y":4}, {"x":6, "y":4, "w":2.75}, {"x":9, "y":4}, {"label":"Alt", "x":10.5, "y":4, "w":1.25}, {"label":"Win", "x":11.75, "y":4, "w":1.25}]
+        },
+
+        "LAYOUT_std_splits": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":4.25, "y":4}, {"x":5.5, "y":4, "w":2.75}, {"x":8.5, "y":4}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+        },
+
+        "LAYOUT_2u_split_arrows": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3}, {"x":1, "y":3}, {"label":"Z", "x":2, "y":3}, {"label":"X", "x":3, "y":3}, {"label":"C", "x":4, "y":3}, {"label":"V", "x":5, "y":3}, {"label":"B", "x":6, "y":3}, {"label":"N", "x":7, "y":3}, {"label":"M", "x":8, "y":3}, {"label":"<", "x":9, "y":3}, {"label":">", "x":10, "y":3}, {"label":"?", "x":11, "y":3}, {"label":"Shift", "x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":4.25, "y":4}, {"x":5.5, "y":4, "w":2.75}, {"x":8.5, "y":4}, {"x":10, "y":4}, {"label":"Alt", "x":11, "y":4}, {"label":"Win", "x":12, "y":4}, {"label":"Menu", "x":13, "y":4}, {"label":"Ctrl", "x":14, "y":4}]
+        },
+
+        "LAYOUT_split_arrows": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"Shift", "x":11.25, "y":3, "w":1.75}, {"x":13, "y":3}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":4.25, "y":4}, {"x":5.5, "y":4, "w":2.75}, {"x":8.5, "y":4}, {"x":10, "y":4}, {"label":"Alt", "x":11, "y":4}, {"label":"Win", "x":12, "y":4}, {"label":"Menu", "x":13, "y":4}, {"label":"Ctrl", "x":14, "y":4}]
+        }
+    }
+}

keyboards/alf_x2/keymaps/default/keymap.c

@@ -0,0 +1,40 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  LAYOUT(
+    KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, 
+    KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+    KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, 
+    KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, KC_NO, 
+    KC_LCTL, KC_LGUI, KC_LALT, KC_VOLU, KC_SPC, KC_VOLD, KC_RALT, MO(1), KC_NO, KC_APP, KC_RCTL),
+
+  LAYOUT(
+    KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, 
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, RESET, 
+    KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, 
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_DOWN, KC_TRNS, KC_TRNS, 
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_TRNS, KC_MPRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+    DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+  } else {
+    DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+  }
+}

keyboards/alf_x2/keymaps/hhkb_60/keymap.c

@@ -0,0 +1,40 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  LAYOUT(
+    KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, 
+    KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, 
+    KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, 
+    KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, MO(1), 
+    KC_LCTL, KC_LGUI, KC_LALT, KC_VOLU, KC_SPC, KC_VOLD, KC_RALT, KC_RGUI, KC_NO, KC_APP, KC_RCTL),
+
+  LAYOUT(
+    KC_NO, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, 
+    KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, RESET, 
+    KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, 
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_DOWN, KC_TRNS, KC_TRNS, 
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_TRNS, KC_MPRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+    DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+  } else {
+    DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+  }
+}

keyboards/alf_x2/readme.md

@@ -0,0 +1,19 @@
+# ALF X2
+
+![alf_x2](https://cdn.shopify.com/s/files/1/1674/0405/products/1_088c2862-1f68-4fdd-a346-965208c3a3de_1024x1024.png?v=1511296076)
+
+A customizable 60% keyboard.
+
+In QMK Configurator, the two keys to the left and right of the spacebar are the microswitches at the top of the PCB.
+
+In the LAYOUT macros, K404 and K408 are the microswitches at the top of the PCB.
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: ALF X2 60%  
+Hardware Availability: [zfrontier](https://en.zfrontier.com/products/group-buy-alf-x2-60)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make alf_x2:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/alf_x2/rules.mk

@@ -0,0 +1,56 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes

keyboards/alpha/alpha.c

@@ -0,0 +1 @@
+#include "alpha.h"

keyboards/alpha/alpha.h

@@ -0,0 +1,16 @@
+#ifndef KB_H
+#define KB_H
+
+#include "quantum.h"
+
+#define LAYOUT( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, \
+	K200, K201, K202, K203,       K205,       K207, K208, K209  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109 }, \
+	{ K200,  K201,  K202,  K203,  KC_NO, K205,  KC_NO, K207,  K208,  K209 }  \
+}
+
+#endif

keyboards/alpha/config.h

@@ -0,0 +1,58 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    PyroL
+#define PRODUCT         alpha
+#define DESCRIPTION     28-key keyboard by PyroL
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 10
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D4, B4, B5 }
+#define MATRIX_COL_PINS { D7, E6, C6, B6, B2, B3, B1, F7, F6, F5 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#define RGB_DI_PIN F4
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 5
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif

keyboards/alpha/keymaps/default/keymap.c

@@ -0,0 +1,76 @@
+#include QMK_KEYBOARD_H
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	LAYOUT(
+		KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, 
+		KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, TO(1), 
+		KC_Z, KC_X, KC_C, KC_V, MT(MOD_LSFT, KC_SPC), KC_B, KC_N, KC_M),
+
+	LAYOUT(
+		KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, 
+		KC_BSPC, KC_ESC, KC_TAB, KC_SCLN, KC_QUOT, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, TO(2), 
+		KC_LCTL, KC_LGUI, KC_LALT, TO(0), MT(MOD_LSFT, KC_ENT), KC_COMM, KC_DOT, KC_SLSH),
+
+	LAYOUT(
+		KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, 
+		KC_LSFT, KC_F11, KC_F12, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_GRV, TO(3), 
+		RGB_VAI, RGB_VAD, RGB_HUI, TO(0), RGB_MOD, KC_MPLY, KC_VOLD, KC_VOLU),
+
+	LAYOUT(
+		RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, 
+		KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, 
+		KC_NO, KC_NO, KC_NO, KC_NO, M(0), KC_NO, KC_NO, KC_NO),
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {	
+	if (record->event.pressed) {
+		switch (keycode) {
+			case 0:
+				SEND_STRING("I'm so sorry... -PyroL");
+				return false;
+		}
+	}
+	return true;
+};
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+		
+	} else {
+		
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+		
+	} else {
+		
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+		
+	} else {
+		
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+		
+	} else {
+		
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+		
+	} else {
+		
+	}
+
+}

keyboards/alpha/readme.md

@@ -0,0 +1,17 @@
+# Alpha
+
+![Alpha](https://i.imgur.com/J6EJ30N.jpg)
+
+A 28-key, semi-ortho keyboard designed by PyroL!
+
+Keyboard Maintainer: [PyroL](https://www.github.com/PyrooL)
+
+Hardware Supported: Alpha PCB, Pro Micro
+
+Hardware Availability: on a group-buy basis for now. Pro Micros can be found on Ali or from the official Sparkfun website.
+
+Make example for Alpha (after setting up your build environment):
+
+    make alpha:default
+
+See [build environment setup](https://docs.qmk.fm/install-build-tools) then the [make instructions](https://docs.qmk.fm/faq/build-compile-qmk) for more information.

keyboards/alpha/rules.mk

@@ -0,0 +1,56 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+BOOTLOADER = caterina
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes

keyboards/alps64/alps64.h

@@ -21,7 +21,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* Alps64 keymap definition macro */
 
-#define KEYMAP( \
+#define LAYOUT_all( \
     K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K26, K27, \
     K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
     K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
@@ -38,7 +38,75 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     { K70, K71, K72, K73, K74, K75, K76, K77 } \
 }
 
-#define KC_KEYMAP( \
+#define LAYOUT_iso( \
+    K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17,      K27, \
+    K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
+    K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
+    K31, K41, K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21,  \
+    K30, K40, K50,           K60,                     K70, K00,      K20  \
+) { \
+    { K00,   K01, K02,   K03, K04, K05, K06,   K07 }, \
+    { KC_NO, K11, K12,   K13, K14, K15, K16,   K17 }, \
+    { K20,   K21, KC_NO, K23, K24, K25, KC_NO, K27 }, \
+    { K30,   K31, K32,   K33, K34, K35, K36,   K37 }, \
+    { K40,   K41, K42,   K43, K44, K45, K46,   K47 }, \
+    { K50,   K51, K52,   K53, K54, K55, K56,   K57 }, \
+    { K60,   K61, K62,   K63, K64, K65, K66,   K67 }, \
+    { K70,   K71, K72,   K73, K74, K75, K76,   K77 } \
+}
+
+#define LAYOUT_standard_60( \
+    K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17,      K27, \
+    K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
+    K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
+    K31,      K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21,  \
+    K30, K40, K50,           K60,                     K70, K00, K10, K20  \
+) { \
+    { K00, K01,   K02,   K03, K04, K05, K06,   K07 }, \
+    { K10, K11,   K12,   K13, K14, K15, K16,   K17 }, \
+    { K20, K21,   KC_NO, K23, K24, K25, KC_NO, K27 }, \
+    { K30, K31,   K32,   K33, K34, K35, K36,   K37 }, \
+    { K40, KC_NO, K42,   K43, K44, K45, K46,   K47 }, \
+    { K50, K51,   K52,   K53, K54, K55, K56,   K57 }, \
+    { K60, K61,   K62,   K63, K64, K65, K66,   K67 }, \
+    { K70, K71,   K72,   K73, K74, K75, K76,   K77 } \
+}
+
+#define LAYOUT_infinity( \
+    K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K26, K27, \
+    K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
+    K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
+    K31,      K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, K22, \
+    K30, K40, K50,           K60,                     K70, K00, K10, K20  \
+) { \
+    { K00, K01,   K02, K03, K04, K05, K06, K07 }, \
+    { K10, K11,   K12, K13, K14, K15, K16, K17 }, \
+    { K20, K21,   K22, K23, K24, K25, K26, K27 }, \
+    { K30, K31,   K32, K33, K34, K35, K36, K37 }, \
+    { K40, KC_NO, K42, K43, K44, K45, K46, K47 }, \
+    { K50, K51,   K52, K53, K54, K55, K56, K57 }, \
+    { K60, K61,   K62, K63, K64, K65, K66, K67 }, \
+    { K70, K71,   K72, K73, K74, K75, K76, K77 } \
+}
+
+#define LAYOUT_aek_103( \
+    K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17,     K27, \
+    K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
+    K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
+    K31,      K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21,  \
+    K30, K40, K50,           K60,                     K70, K00,      K20  \
+) { \
+    { K00,   K01,   K02,   K03, K04, K05, K06,   K07 }, \
+    { KC_NO, K11,   K12,   K13, K14, K15, K16,   K17 }, \
+    { K20,   K21,   KC_NO, K23, K24, K25, KC_NO, K27 }, \
+    { K30,   K31,   K32,   K33, K34, K35, K36,   K37 }, \
+    { K40,   KC_NO, K42,   K43, K44, K45, K46,   K47 }, \
+    { K50,   K51,   K52,   K53, K54, K55, K56,   K57 }, \
+    { K60,   K61,   K62,   K63, K64, K65, K66,   K67 }, \
+    { K70,   K71,   K72,   K73, K74, K75, K76,   K77 } \
+}
+
+#define LAYOUT_kc( \
     K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K26, K27, \
     K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
     K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \

keyboards/alps64/info.json

@@ -0,0 +1,28 @@
+{
+  "keyboard_name": "alps64",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 15,
+  "height": 5,
+  "layouts": {
+      "LAYOUT_all": {
+        "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+      },
+
+      "LAYOUT_standard_60": {
+          "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+      },
+
+      "LAYOUT_infinity": {
+        "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":6}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"label":"Win", "x":11.5, "y":4}, {"label":"Menu", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]
+      },
+
+      "LAYOUT_aek_103": {
+        "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4, "w":1.25}, {"label":"Alt", "x":2.75, "y":4, "w":1.5}, {"x":4.25, "y":4, "w":6.5}, {"label":"Alt", "x":10.75, "y":4, "w":1.5}, {"label":"Menu", "x":12.25, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]
+      },
+
+      "LAYOUT_iso": {
+        "layout": [{"label":"\u00ac", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"AltGr", "x":11, "y":4, "w":1.5}, {"label":"Menu", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]
+      }
+  }
+}

keyboards/alps64/keymaps/default/keymap.c

@@ -2,7 +2,7 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* 0: qwerty */
-    KC_KEYMAP( \
+    LAYOUT_kc( \
         GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, NUHS, BSPC, \
         TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS, \
         CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,ENT,  \

keyboards/amj40/keymaps/jetpacktuxedo/keymap.c

@@ -0,0 +1,43 @@
+#include "amj40.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  // Default Layer
+  [0] = KEYMAP( \
+      KC_GESC,       KC_Q,    KC_W,   KC_E, KC_R, KC_T,    KC_Y, KC_U,    KC_I,    KC_O,   KC_P,   KC_BSPC,\
+      LT(2, KC_TAB), KC_A,    KC_S,   KC_D, KC_F, KC_G,    KC_H, KC_J,    KC_K,    KC_L,   LT(2, KC_ENT),\
+      KC_LSFT,       KC_Z,    KC_X,   KC_C, KC_V, KC_B,    KC_N, KC_M,    KC_COMM, KC_DOT, MT(MOD_RSFT, KC_SLSH),\
+      KC_LCTL,       KC_LGUI, KC_LALT,      LT(1, KC_SPC), LT(1, KC_SPC), KC_RALT, MO(3),  KC_RCTL \
+      ),
+
+  // Number Layer
+  [1] = KEYMAP( \
+      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
+      KC_TRNS, KC_MINS, KC_EQL,  KC_SCLN, KC_QUOT, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_TRNS, \
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, MT(MOD_RSFT, KC_BSLS), \
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS\
+      ),
+
+  // Shifted Layer
+  [2] = KEYMAP( \
+      KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,\
+      KC_TRNS, KC_UNDS, KC_PLUS, KC_COLN, KC_DQUO, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END,  KC_TRNS, \
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LCBR, KC_RCBR, KC_PIPE, \
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS\
+      ),
+
+  // Fkey Layer
+  [3] = KEYMAP( \
+      KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10, RESET,\
+      KC_TRNS, KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+      KC_TRNS, TG(4),   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS\
+      ),
+
+  // Gaming Layer
+  [4] = KEYMAP( \
+      KC_ESC,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_WH_U, KC_BTN1, KC_MS_U, KC_BTN2, KC_TRNS, KC_TRNS,\
+      KC_TAB,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_WH_D, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,\
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS\
+      ),
+};

keyboards/amj40/keymaps/jetpacktuxedo/readme.md

@@ -0,0 +1,55 @@
+Jetpacktuxedo's AMJ40 layout
+=====================
+
+This is based heavily on my minivan layout, with most difference stemming from the different widths between the minivan and the AMJ40. ![Image of my specific layout](https://i.imgur.com/B9XraJY.jpg)
+
+## Base Layer (0)
+
+The base layer is pretty simple, straight qwerty layout where available. Both spacebars go to layer 1 when held. `tab` is `tab` when pressed and `fn2` when held, `enter` is the same. `GESC` is `esc` when used alone, but `~` when shifted. `/` is `/` when tapped but `rshift` when held.
+```
+|GESC| Q  | W  | E  | R  | T  | Y  | U  | I  | O  | P  |BSPC|
+| TAB | A  | S  | D  | F  | G  | H  | J  | K  | L  | ENTER  |
+|LSHIFT | Z  | X  | C  | V  | B  | N  | M  | ,  | .  |  /   |
+|LCTRL|LWIN|LALT |  SPACE   |    SPACE    |RALT |FN 3|RCTRL |
+```
+
+## Number Layer (1)
+
+Numbers are set up just like on my minivan layout, but symbols are a bit different because the AMJ40 is one key narrower than the minivan and also lacks dedicated arrows. Decided to go with `hjkl` arrows, which takes some getting used to. `;` is on a layer now because of the narrowness I mentioned before, and it (along with `-`, `=`, and `'`) moves to the right hand to leave room for the `hjkl` arrows. `delete` on `backspace`, `[` and `]` on `<` and `>`, and `\` on `/` are all stolen straight from my minivan layout.
+```
+| `  | 1  | 2  | 3  | 4  | 5  | 6  | 7  | 8  | 9  | 0  |DEL |
+|     | -  | =  | ;  | '  |    | ←  | ↓  | ↑  | →  |        |
+|       |    |    |    |    |    |    |    | [  | ]  |  \   |
+|     |    |     |          |             |     |    |      |
+```
+
+## Shifted Layer (2)
+
+I don't want to be using two key combos constantly, so I also added this symbol layer that is basically shift+numeric layer. Also has nav keys on top of where arrows sit on the previous layer
+```
+| ~  | !  | @  | #  | $  | %  | ^  | &  | *  | (  | )  |DEL |
+|     | _  | +  | :  | "  |    |HOME|PGDN|PGUP|END |        |
+|       |    |    |    |    |    |    |    | {  | }  |  |   |
+|     |    |     |          |             |     |    |      |
+```
+
+## Fkey Layer (3)
+
+Honestly, I use this more for jumping to my gaming layer and for reset than I use it for Fkeys. Lol. Hitting the left windows key while in this layer locks the gaming layer listed below
+```
+|    | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 |F10 |RSET|
+|     |F11 |F12 |    |    |    |    |    |    |    |        |
+|       |    |    |    |    |    |    |    |    |    |      |
+|     |FN 4|     |          |             |     |    |      |
+```
+
+## "Gaming" Layer (4)
+
+Based on the "gaming" layer on my minivan that I mostly just use for mouse keys. To toggle this back off you hit the right windows key (to go to layer 3) and then the left windows key again.
+```
+|ESC |    |    |    |    |    |MWUP|MLCK|M UP|MRCK|    |    |
+| TAB |    |    |    |    |    |MWDN|M L |M DN|M R |        |
+|       |    |    |    |    |    |    |    |    |    |      |
+|     |    |     |  SPACE   |             |     |    |      |
+```
+

keyboards/amj40/keymaps/jetpacktuxedo/rules.mk

@@ -0,0 +1,27 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
+CONSOLE_ENABLE   = no  # Console for debug(+400)
+COMMAND_ENABLE   = no  # Commands for debug and configuration
+NKRO_ENABLE      = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+MIDI_ENABLE      = no  # MIDI controls
+AUDIO_ENABLE     = no  # Audio output on port C6
+UNICODE_ENABLE   = no  # Unicode
+BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE  = no  # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. It uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+#define ws2812_PORTREG  PORTD
+#define ws2812_DDRREG   DDRD
+
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/atom47/keymaps/maartenwut/keymap.c

@@ -11,36 +11,60 @@
 
 #define _______ KC_TRNS
 
+enum custom_keycodes {
+    CTRLZ = SAFE_RANGE,
+    CTRLX,
+    CTRLC,
+    CTRLV
+};
+
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_MA] = KEYMAP_ANSI(
-  KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,	\
+  KC_GESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,	\
   KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,				KC_ENT,  	\
   KC_LSFT,					KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_SLSH,	KC_RSFT,	\
   KC_LCTL,		KC_LGUI,	KC_LALT,	MO(_LO),				KC_SPC, 				KC_SPC,					MO(_RA),	KC_RALT,	KC_APP,		KC_RCTRL),	\
 
+[_LO] = KEYMAP_ANSI(
+  KC_GRV,		KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		\
+  KC_1,			KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,				KC_EQL,		\
+  _______,					CTRLZ,		CTRLX,		CTRLC,		CTRLV,		_______,	_______,	KC_QUOT,	KC_LBRC,	KC_RBRC,	KC_BSLS,	_______,	\
+  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	RESET),	\
+
 [_RA] = KEYMAP_ANSI(
   _______,		_______,	_______,	_______,	_______,	_______,	_______,	KC_PGUP,	KC_UP,		KC_PGDN,	_______,	_______,	_______,	\
   KC_CAPS,		_______,	_______,	_______,	_______,	_______,	_______,	KC_LEFT,	KC_DOWN,	KC_RIGHT,	_______,				_______,	\
   _______,					_______,	_______,	_______,	_______,	_______,	_______,	_______,	KC_VOLD,	KC_VOLU,	KC_MPLY,	KC_PSCR,	\
   _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______),	\
 
-[_LO] = KEYMAP_ANSI(
-  KC_GRV,		KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		\
-  KC_1,			KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,				KC_EQL,		\
-  _______,					_______,	_______,	_______,	_______,	_______,	_______,	KC_QUOT,	KC_LBRC,	KC_RBRC,	KC_BSLS,	_______,	\
-  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	RESET),	\
-
 };
 
 void led_set_user(uint8_t usb_led) {
     if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
         // Turn capslock on
- 	   	PORTE &= ~(1 << 6);
-
-
+		PORTE &= ~(1 << 6);
     } else {
         // Turn capslock off
     	PORTE |= (1 << 6);
     }
 }
 
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    if (record->event.pressed) {
+        switch(keycode) {
+            case CTRLZ:
+                SEND_STRING(SS_LCTRL("z"));
+                return false;
+            case CTRLX:
+                SEND_STRING(SS_LCTRL("x"));
+                return false;
+            case CTRLC:
+                SEND_STRING(SS_LCTRL("c"));
+                return false;
+            case CTRLV:
+                SEND_STRING(SS_LCTRL("v"));
+                return false;
+        }
+    }
+    return true;
+};

keyboards/bananasplit/keymaps/talljoe/config.h

@@ -0,0 +1,22 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include QMK_KEYBOARD_CONFIG_H
+
+#define SPACE_COUNT 3
+
+#define LAYOUT(                                                                     \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D,      \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,           \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,                \
+    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,           \
+    K40, K41, K42,      K44, K45, K46,      K48, K49,      K4B, K4C                 \
+) {                                                                                 \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D },       \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D },       \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D },       \
+    { K30, KC_NO,    K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D },  \
+    { K40, K41, K42, KC_NO, K44, K45, K46, KC_NO, K48, K49, KC_NO, K4B, K4C, KC_NO }\
+}
+
+#endif

keyboards/bananasplit/keymaps/talljoe/keymap.c

@@ -0,0 +1 @@
+// This space intentionally left blank

keyboards/bfake/bfake.h

@@ -20,7 +20,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "quantum.h"
 
-#define KEYMAP( \
+#define LAYOUT_all( \
   K61, K71, K72, K73, K74, K64, K65, K75, K76, K77, K78, K68, K66, K10, K60,\
    K11, K01, K02, K03, K04, K14, K15, K05, K06, K07, K08, K18, K16,  K20,   \
     K12, K21, K22, K23, K24, K34, K35, K25, K26, K27, K28, K38,   K40,      \

keyboards/bfake/info.json

@@ -0,0 +1,12 @@
+{
+  "keyboard_name": "b.fake",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 15,
+  "height": 5,
+  "layouts": {
+      "LAYOUT_all": {
+          "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+      }
+  }
+}

keyboards/bfake/keymaps/default/keymap.c

@@ -15,24 +15,24 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include "bfake.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [0] = KEYMAP(
+  [0] = LAYOUT_all(
       KC_GESC, KC_1,  KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV,
       KC_TAB,  KC_Q,  KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
       MO(1),   KC_A,  KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
       KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
       KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_RALT, KC_RGUI, KC_MENU, KC_RCTL
       ),
-  [1] = KEYMAP(
+  [1] = LAYOUT_all(
       KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS,
       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_END, KC_DEL,
       MO(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS,
       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGDN, KC_TRNS, KC_TRNS, MO(2),
       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
       ),
-  [2] = KEYMAP(
+  [2] = LAYOUT_all(
       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,
       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
       MO(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,

keyboards/bfake/keymaps/mechmerlin/keymap.c

@@ -15,24 +15,24 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include "bfake.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [0] = KEYMAP(
+  [0] = LAYOUT_all(
       KC_GESC, KC_1,    KC_2,    KC_3,     KC_4,  KC_5,    KC_6,    KC_7, KC_8, KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_NO, KC_BSPC,
       KC_TAB,  KC_Q,    KC_W,    KC_E,     KC_R,  KC_T,    KC_Y,    KC_U, KC_I, KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
       KC_LCTL, KC_A,    KC_S,    KC_D,     KC_F,  KC_G,    KC_H,    KC_J, KC_K, KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
       KC_LSFT, KC_NO,   KC_Z,    KC_X,     KC_C,  KC_V,    KC_B,    KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, TG(2),
       KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, MO(1), KC_RALT, KC_RGUI, KC_RCTL
       ),
-  [1] = KEYMAP(
+  [1] = LAYOUT_all(
       KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NO, KC_DEL,
       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
       KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
       MO(3),   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS,
       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
       ),
-  [2] = KEYMAP(
+  [2] = LAYOUT_all(
       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
@@ -40,7 +40,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT
       ),
 
-  [3] = KEYMAP(
+  [3] = LAYOUT_all(
       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,

keyboards/bfo9000/bfo9000.c

@@ -0,0 +1 @@
+#include "bfo9000.h"

keyboards/bfo9000/bfo9000.h

@@ -0,0 +1,37 @@
+#ifndef BFO9000_H
+#define BFO9000_H
+
+#include "quantum.h"
+
+#ifdef USE_I2C
+#include <stddef.h>
+#ifdef __AVR__
+    #include <avr/io.h>
+    #include <avr/interrupt.h>
+#endif
+#endif
+
+#define LAYOUT( \
+    L00, L01, L02, L03, L04, L05, L06, L07, L08, R00, R01, R02, R03, R04, R05, R06, R07, R08, \
+    L10, L11, L12, L13, L14, L15, L16, L17, L18, R10, R11, R12, R13, R14, R15, R16, R17, R18, \
+    L20, L21, L22, L23, L24, L25, L26, L27, L28, R20, R21, R22, R23, R24, R25, R26, R27, R28, \
+    L30, L31, L32, L33, L34, L35, L36, L37, L38, R30, R31, R32, R33, R34, R35, R36, R37, R38, \
+    L40, L41, L42, L43, L44, L45, L46, L47, L48, R40, R41, R42, R43, R44, R45, R46, R47, R48, \
+    L50, L51, L52, L53, L54, L55, L56, L57, L58, R50, R51, R52, R53, R54, R55, R56, R57, R58 \
+    ) \
+    { \
+        { L00, L01, L02, L03, L04, L05, L06, L07, L08 }, \
+        { L10, L11, L12, L13, L14, L15, L16, L17, L18 }, \
+        { L20, L21, L22, L23, L24, L25, L26, L27, L28 }, \
+        { L30, L31, L32, L33, L34, L35, L36, L37, L38 }, \
+        { L40, L41, L42, L43, L44, L45, L46, L47, L48 }, \
+        { L50, L51, L52, L53, L54, L55, L56, L57, L58 }, \
+        { R00, R01, R02, R03, R04, R05, R06, R07, R08 }, \
+        { R10, R11, R12, R13, R14, R15, R16, R17, R18 }, \
+        { R20, R21, R22, R23, R24, R25, R26, R27, R28 }, \
+        { R30, R31, R32, R33, R34, R35, R36, R37, R38 }, \
+        { R40, R41, R42, R43, R44, R45, R46, R47, R48 }, \
+        { R50, R51, R52, R53, R54, R55, R56, R57, R58 } \
+    }
+
+#endif

keyboards/bfo9000/config.h

@@ -0,0 +1,78 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xCEEB
+#define PRODUCT_ID      0x1169
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    Keebio
+#define PRODUCT         BFO-9000
+#define DESCRIPTION     Really big split ortholinear keyboard
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 12
+#define MATRIX_COLS 9
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D3, D2, D4, C6, D7, E6 }
+#define MATRIX_COL_PINS { B5, B6, B2, B3, B1, F7, F6, F5, F4 }
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN B4
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 20    // Number of LEDs
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+
+#endif

keyboards/bfo9000/i2c.c

@@ -0,0 +1,162 @@
+#include <util/twi.h>
+#include <avr/io.h>
+#include <stdlib.h>
+#include <avr/interrupt.h>
+#include <util/twi.h>
+#include <stdbool.h>
+#include "i2c.h"
+
+#ifdef USE_I2C
+
+// Limits the amount of we wait for any one i2c transaction.
+// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
+// 9 bits, a single transaction will take around 90μs to complete.
+//
+// (F_CPU/SCL_CLOCK)  =>  # of μC cycles to transfer a bit
+// poll loop takes at least 8 clock cycles to execute
+#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
+
+#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
+
+volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+static volatile uint8_t slave_buffer_pos;
+static volatile bool slave_has_register_set = false;
+
+// Wait for an i2c operation to finish
+inline static
+void i2c_delay(void) {
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+
+  // easier way, but will wait slightly longer
+  // _delay_us(100);
+}
+
+// Setup twi to run at 100kHz
+void i2c_master_init(void) {
+  // no prescaler
+  TWSR = 0;
+  // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
+  // Check datasheets for more info.
+  TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
+}
+
+// Start a transaction with the given i2c slave address. The direction of the
+// transfer is set with I2C_READ and I2C_WRITE.
+// returns: 0 => success
+//          1 => error
+uint8_t i2c_master_start(uint8_t address) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
+
+  i2c_delay();
+
+  // check that we started successfully
+  if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
+    return 1;
+
+  TWDR = address;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
+    return 1; // slave did not acknowledge
+  else
+    return 0; // success
+}
+
+
+// Finish the i2c transaction.
+void i2c_master_stop(void) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+}
+
+// Write one byte to the i2c slave.
+// returns 0 => slave ACK
+//         1 => slave NACK
+uint8_t i2c_master_write(uint8_t data) {
+  TWDR = data;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  // check if the slave acknowledged us
+  return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
+}
+
+// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
+// if ack=0 the acknowledge bit is not set.
+// returns: byte read from i2c device
+uint8_t i2c_master_read(int ack) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
+
+  i2c_delay();
+  return TWDR;
+}
+
+void i2c_reset_state(void) {
+  TWCR = 0;
+}
+
+void i2c_slave_init(uint8_t address) {
+  TWAR = address << 0; // slave i2c address
+  // TWEN  - twi enable
+  // TWEA  - enable address acknowledgement
+  // TWINT - twi interrupt flag
+  // TWIE  - enable the twi interrupt
+  TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
+}
+
+ISR(TWI_vect);
+
+ISR(TWI_vect) {
+  uint8_t ack = 1;
+  switch(TW_STATUS) {
+    case TW_SR_SLA_ACK:
+      // this device has been addressed as a slave receiver
+      slave_has_register_set = false;
+      break;
+
+    case TW_SR_DATA_ACK:
+      // this device has received data as a slave receiver
+      // The first byte that we receive in this transaction sets the location
+      // of the read/write location of the slaves memory that it exposes over
+      // i2c.  After that, bytes will be written at slave_buffer_pos, incrementing
+      // slave_buffer_pos after each write.
+      if(!slave_has_register_set) {
+        slave_buffer_pos = TWDR;
+        // don't acknowledge the master if this memory loctaion is out of bounds
+        if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
+          ack = 0;
+          slave_buffer_pos = 0;
+        }
+        slave_has_register_set = true;
+      } else {
+        i2c_slave_buffer[slave_buffer_pos] = TWDR;
+        BUFFER_POS_INC();
+      }
+      break;
+
+    case TW_ST_SLA_ACK:
+    case TW_ST_DATA_ACK:
+      // master has addressed this device as a slave transmitter and is
+      // requesting data.
+      TWDR = i2c_slave_buffer[slave_buffer_pos];
+      BUFFER_POS_INC();
+      break;
+
+    case TW_BUS_ERROR: // something went wrong, reset twi state
+      TWCR = 0;
+    default:
+      break;
+  }
+  // Reset everything, so we are ready for the next TWI interrupt
+  TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
+}
+#endif

keyboards/bfo9000/i2c.h

@@ -0,0 +1,49 @@
+#ifndef I2C_H
+#define I2C_H
+
+#include <stdint.h>
+
+#ifndef F_CPU
+#define F_CPU 16000000UL
+#endif
+
+#define I2C_READ 1
+#define I2C_WRITE 0
+
+#define I2C_ACK 1
+#define I2C_NACK 0
+
+#define SLAVE_BUFFER_SIZE 0x10
+
+// i2c SCL clock frequency
+#define SCL_CLOCK  400000L
+
+extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+void i2c_master_init(void);
+uint8_t i2c_master_start(uint8_t address);
+void i2c_master_stop(void);
+uint8_t i2c_master_write(uint8_t data);
+uint8_t i2c_master_read(int);
+void i2c_reset_state(void);
+void i2c_slave_init(uint8_t address);
+
+
+static inline unsigned char i2c_start_read(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_READ);
+}
+
+static inline unsigned char i2c_start_write(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_WRITE);
+}
+
+// from SSD1306 scrips
+extern unsigned char i2c_rep_start(unsigned char addr);
+extern void i2c_start_wait(unsigned char addr);
+extern unsigned char i2c_readAck(void);
+extern unsigned char i2c_readNak(void);
+extern unsigned char i2c_read(unsigned char ack);
+
+#define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak();
+
+#endif

keyboards/bfo9000/keymaps/default/config.h

@@ -1,5 +1,8 @@
 /*
-Copyright 2017 Danny Nguyen <danny@keeb.io>
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -26,20 +29,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define USE_I2C
 
 /* Select hand configuration */
-#define PERMISSIVE_HOLD
-#define PREVENT_STUCK_MODIFIERS
+
 #define MASTER_LEFT
 // #define MASTER_RIGHT
 // #define EE_HANDS
-/*
-#undef RGBLED_NUM
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 12
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-*/
-#define TAPPING_TERM 200
-#include "../../config.h"
 
 #endif

keyboards/bfo9000/keymaps/default/keymap.c

@@ -0,0 +1,19 @@
+#include QMK_KEYBOARD_H
+
+#define _BASE 0
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_BASE] = LAYOUT( \
+    KC_ESC,  KC_VOLU, KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,         KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL, \
+    KC_HOME, KC_VOLD, KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,          KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \
+    KC_END,  KC_TAB,  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,          KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, \
+    KC_PGUP, KC_CAPS, KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,          KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_ENT, \
+    KC_PGDN, KC_UP,   KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,          KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   XXXXXXX, \
+    KC_LEFT, KC_DOWN, KC_RGHT, KC_LCTL, KC_LALT, KC_LGUI, KC_SPC,  KC_SPC,  KC_ENT,        KC_BSPC, KC_SPC,  KC_SPC,  KC_RGUI, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \
+)
+};

keyboards/bfo9000/matrix.c

@@ -0,0 +1,342 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#ifdef USE_I2C
+// provides memcpy for copying TWI slave buffer
+// #include <string.h>
+#endif
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "split_util.h"
+#include "pro_micro.h"
+#include "config.h"
+
+#ifdef USE_I2C
+#  include "i2c.h"
+#else // USE_SERIAL
+#  include "serial.h"
+#endif
+
+#ifndef DEBOUNCE
+#  define DEBOUNCE	5
+#endif
+
+#define ERROR_DISCONNECT_COUNT 5
+
+static uint8_t debouncing = DEBOUNCE;
+static const int ROWS_PER_HAND = MATRIX_ROWS/2;
+static uint8_t error_count = 0;
+
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    debug_enable = true;
+    debug_matrix = true;
+    debug_mouse = true;
+    // initialize row and col
+    unselect_rows();
+    init_cols();
+
+    TX_RX_LED_INIT;
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+
+    matrix_init_quantum();
+}
+
+uint8_t _matrix_scan(void)
+{
+    // Right hand is stored after the left in the matrix so, we need to offset it
+    int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
+
+    for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+        select_row(i);
+        _delay_us(30);  // without this wait read unstable value.
+        matrix_row_t cols = read_cols();
+        if (matrix_debouncing[i+offset] != cols) {
+            matrix_debouncing[i+offset] = cols;
+            debouncing = DEBOUNCE;
+        }
+        unselect_rows();
+    }
+
+    if (debouncing) {
+        if (--debouncing) {
+            _delay_ms(1);
+        } else {
+            for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+                matrix[i+offset] = matrix_debouncing[i+offset];
+            }
+        }
+    }
+
+    return 1;
+}
+
+#ifdef USE_I2C
+
+// Get rows from other half over i2c
+int i2c_transaction(void) {
+    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+    int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
+    if (err) goto i2c_error;
+
+    // start of matrix stored at 0x00
+    err = i2c_master_write(0x00);
+    if (err) goto i2c_error;
+
+    // Start read
+    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
+    if (err) goto i2c_error;
+
+    if (!err) {
+        /*
+        // read from TWI byte-by-byte into matrix_row_t memory space
+        size_t i;
+        for (i = 0; i < SLAVE_BUFFER_SIZE-1; ++i) {
+            *((uint8_t*)&matrix[slaveOffset]+i) = i2c_master_read(I2C_ACK);
+        }
+        // last byte to be read / end of chunk
+        *((uint8_t*)&matrix[slaveOffset]+i) = i2c_master_read(I2C_NACK);
+        */
+
+        // kludge for column #9: unpack bits for keys (2,9) and (3,9) from (1,7) and (1,8)
+        // i2c_master_read(I2C_ACK);
+        matrix[slaveOffset+0] = i2c_master_read(I2C_ACK);
+        // i2c_master_read(I2C_ACK);
+        matrix[slaveOffset+1] = (matrix_row_t)i2c_master_read(I2C_ACK)\
+                                | (matrix[slaveOffset+0]&0x40U)<<2;
+        // i2c_master_read(I2C_ACK);
+        matrix[slaveOffset+2] = (matrix_row_t)i2c_master_read(I2C_NACK)\
+                                | (matrix[slaveOffset+0]&0x80U)<<1;
+        // clear highest two bits on row 1, where the col9 bits were transported
+        matrix[slaveOffset+0] &= 0x3F;
+
+        i2c_master_stop();
+    } else {
+i2c_error: // the cable is disconnected, or something else went wrong
+        i2c_reset_state();
+        return err;
+    }
+
+    return 0;
+}
+
+#else // USE_SERIAL
+
+int serial_transaction(void) {
+    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+    if (serial_update_buffers()) {
+        return 1;
+    }
+
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        matrix[slaveOffset+i] = serial_slave_buffer[i];
+    }
+    return 0;
+}
+#endif
+
+uint8_t matrix_scan(void)
+{
+    int ret = _matrix_scan();
+
+
+
+#ifdef USE_I2C
+    if( i2c_transaction() ) {
+#else // USE_SERIAL
+    if( serial_transaction() ) {
+#endif
+        // turn on the indicator led when halves are disconnected
+        TXLED1;
+
+        error_count++;
+
+        if (error_count > ERROR_DISCONNECT_COUNT) {
+            // reset other half if disconnected
+            int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+            for (int i = 0; i < ROWS_PER_HAND; ++i) {
+                matrix[slaveOffset+i] = 0;
+            }
+        }
+    } else {
+        // turn off the indicator led on no error
+        TXLED0;
+        error_count = 0;
+    }
+    matrix_scan_quantum();
+    return ret;
+}
+
+void matrix_slave_scan(void) {
+    _matrix_scan();
+
+    int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
+
+#ifdef USE_I2C
+    // SLAVE_BUFFER_SIZE is from i2c.h
+    // (MATRIX_ROWS/2*sizeof(matrix_row_t))
+    // memcpy((void*)i2c_slave_buffer, (const void*)&matrix[offset], (ROWS_PER_HAND*sizeof(matrix_row_t)));
+
+    // kludge for column #9: put bits for keys (2,9) and (3,9) into (1,7) and (1,8)
+    i2c_slave_buffer[0] = (uint8_t)(matrix[offset+0])\
+                          | (matrix[offset+1]&0x100U)>>2\
+                          | (matrix[offset+2]&0x100U)>>1;
+    i2c_slave_buffer[1] = (uint8_t)(matrix[offset+1]);
+    i2c_slave_buffer[2] = (uint8_t)(matrix[offset+2]);
+    // note: looks like a possible operator-precedence bug here, in last version?
+    /*
+    i2c_slave_buffer[1] = (uint8_t)matrix[offset+0];
+    i2c_slave_buffer[2] = (uint8_t)(matrix[offset+1]>>8);
+    i2c_slave_buffer[3] = (uint8_t)(matrix[offset+1]>>8);
+    i2c_slave_buffer[4] = (uint8_t)(matrix[offset+2]>>8);
+    i2c_slave_buffer[5] = (uint8_t)matrix[offset+2];
+    */
+#else // USE_SERIAL
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        serial_slave_buffer[i] = matrix[offset+i];
+    }
+#endif
+}
+
+bool matrix_is_modified(void)
+{
+    if (debouncing) return false;
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse16(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop16(matrix[i]);
+    }
+    return count;
+}
+
+static void  init_cols(void)
+{
+    for(int x = 0; x < MATRIX_COLS; x++) {
+        _SFR_IO8((col_pins[x] >> 4) + 1) &=  ~_BV(col_pins[x] & 0xF);
+        _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF);
+    }
+}
+
+static matrix_row_t read_cols(void)
+{
+    matrix_row_t result = 0;
+    for(int x = 0; x < MATRIX_COLS; x++) {
+        result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x);
+    }
+    return result;
+}
+
+static void unselect_rows(void)
+{
+    for(int x = 0; x < ROWS_PER_HAND; x++) {
+        _SFR_IO8((row_pins[x] >> 4) + 1) &=  ~_BV(row_pins[x] & 0xF);
+        _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF);
+    }
+}
+
+static void select_row(uint8_t row)
+{
+    _SFR_IO8((row_pins[row] >> 4) + 1) |=  _BV(row_pins[row] & 0xF);
+    _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF);
+}

keyboards/bfo9000/readme.md

@@ -0,0 +1,18 @@
+BFO-9000
+========
+
+A split full-size ortholinear keyboard made and sold by Keebio. Each half is a 6x9 arrangement, with breakable pieces to allow the number of rows to be customized between 4 to 6, and the number of columns to be between 7 to 9. [More info at Keebio](https://keeb.io).
+
+Keyboard Maintainer: [Bakingpy/nooges](https://github.com/nooges)  
+Hardware Supported: Pro Micro  
+Hardware Availability: [Keebio](https://keeb.io)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make bfo9000:default
+
+Example of flashing this keyboard:
+
+    make bfo9000:default:avrdude
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/bfo9000/rules.mk

@@ -0,0 +1,70 @@
+SRC += matrix.c \
+	   i2c.c \
+	   split_util.c \
+	   serial.c
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+CUSTOM_MATRIX = yes

keyboards/bfo9000/serial.c

@@ -0,0 +1,230 @@
+/*
+ * WARNING: be careful changing this code, it is very timing dependent
+ */
+
+#ifndef F_CPU
+#define F_CPU 16000000
+#endif
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <stdbool.h>
+#include "serial.h"
+
+#ifdef USE_SERIAL
+
+// Serial pulse period in microseconds. Its probably a bad idea to lower this
+// value.
+#define SERIAL_DELAY 24
+
+matrix_row_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
+matrix_row_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
+
+#define ROW_MASK (((matrix_row_t)0-1)>>(8*sizeof(matrix_row_t)-MATRIX_COLS))
+
+#define SLAVE_DATA_CORRUPT (1<<0)
+volatile uint8_t status = 0;
+
+inline static
+void serial_delay(void) {
+  _delay_us(SERIAL_DELAY);
+}
+
+inline static
+void serial_output(void) {
+  SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
+}
+
+// make the serial pin an input with pull-up resistor
+inline static
+void serial_input(void) {
+  SERIAL_PIN_DDR  &= ~SERIAL_PIN_MASK;
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+inline static
+matrix_row_t serial_read_pin(void) {
+  return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
+}
+
+inline static
+void serial_low(void) {
+  SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
+}
+
+inline static
+void serial_high(void) {
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+void serial_master_init(void) {
+  serial_output();
+  serial_high();
+}
+
+void serial_slave_init(void) {
+  serial_input();
+
+  // Enable INT0
+  EIMSK |= _BV(INT0);
+  // Trigger on falling edge of INT0
+  EICRA &= ~(_BV(ISC00) | _BV(ISC01));
+}
+
+// Used by the master to synchronize timing with the slave.
+static
+void sync_recv(void) {
+  serial_input();
+  // This shouldn't hang if the slave disconnects because the
+  // serial line will float to high if the slave does disconnect.
+  while (!serial_read_pin());
+  serial_delay();
+}
+
+// Used by the slave to send a synchronization signal to the master.
+static
+void sync_send(void) {
+  serial_output();
+
+  serial_low();
+  serial_delay();
+
+  serial_high();
+}
+
+// Reads a byte from the serial line
+static
+matrix_row_t serial_read_byte(void) {
+  matrix_row_t byte = 0;
+  serial_input();
+  for ( uint8_t i = 0; i < MATRIX_COLS; ++i) {
+    byte = (byte << 1) | serial_read_pin();
+    serial_delay();
+    _delay_us(1);
+  }
+
+  return byte;
+}
+
+// Sends a byte with MSB ordering
+static
+void serial_write_byte(matrix_row_t data) {
+  matrix_row_t b = MATRIX_COLS;
+  serial_output();
+  while( b-- ) {
+    if(data & (1UL << b)) {
+      serial_high();
+    } else {
+      serial_low();
+    }
+    serial_delay();
+  }
+}
+
+// interrupt handle to be used by the slave device
+ISR(SERIAL_PIN_INTERRUPT) {
+  sync_send();
+
+  matrix_row_t checksum = 0;
+  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+    serial_write_byte(serial_slave_buffer[i]);
+    sync_send();
+    checksum += ROW_MASK & serial_slave_buffer[i];
+  }
+  serial_write_byte(checksum);
+  sync_send();
+
+  // wait for the sync to finish sending
+  serial_delay();
+
+  // read the middle of pulses
+  _delay_us(SERIAL_DELAY/2);
+
+  matrix_row_t checksum_computed = 0;
+  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+    serial_master_buffer[i] = serial_read_byte();
+    sync_send();
+    checksum_computed += ROW_MASK & serial_master_buffer[i];
+  }
+  matrix_row_t checksum_received = serial_read_byte();
+  sync_send();
+
+  serial_input(); // end transaction
+
+  if ( checksum_computed != checksum_received ) {
+    status |= SLAVE_DATA_CORRUPT;
+  } else {
+    status &= ~SLAVE_DATA_CORRUPT;
+  }
+}
+
+inline
+bool serial_slave_DATA_CORRUPT(void) {
+  return status & SLAVE_DATA_CORRUPT;
+}
+
+// Copies the serial_slave_buffer to the master and sends the
+// serial_master_buffer to the slave.
+//
+// Returns:
+// 0 => no error
+// 1 => slave did not respond
+int serial_update_buffers(void) {
+  // this code is very time dependent, so we need to disable interrupts
+  cli();
+
+  // signal to the slave that we want to start a transaction
+  serial_output();
+  serial_low();
+  _delay_us(1);
+
+  // wait for the slaves response
+  serial_input();
+  serial_high();
+  _delay_us(SERIAL_DELAY);
+
+  // check if the slave is present
+  if (serial_read_pin()) {
+    // slave failed to pull the line low, assume not present
+    sei();
+    return 1;
+  }
+
+  // if the slave is present syncronize with it
+  sync_recv();
+
+  matrix_row_t checksum_computed = 0;
+  // receive data from the slave
+  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+    serial_slave_buffer[i] = serial_read_byte();
+    sync_recv();
+    checksum_computed += ROW_MASK & serial_slave_buffer[i];
+  }
+  matrix_row_t checksum_received = serial_read_byte();
+  sync_recv();
+
+  if (checksum_computed != checksum_received) {
+    sei();
+    return 1;
+  }
+
+  matrix_row_t checksum = 0;
+  // send data to the slave
+  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+    serial_write_byte(serial_master_buffer[i]);
+    sync_recv();
+    checksum += ROW_MASK & serial_master_buffer[i];
+  }
+  serial_write_byte(checksum);
+  sync_recv();
+
+  // always, release the line when not in use
+  serial_output();
+  serial_high();
+
+  sei();
+  return 0;
+}
+
+#endif

keyboards/bfo9000/serial.h

@@ -0,0 +1,27 @@
+#ifndef MY_SERIAL_H
+#define MY_SERIAL_H
+
+#include "config.h"
+#include "matrix.h"
+#include <stdbool.h>
+
+/* TODO:  some defines for interrupt setup */
+#define SERIAL_PIN_DDR DDRD
+#define SERIAL_PIN_PORT PORTD
+#define SERIAL_PIN_INPUT PIND
+#define SERIAL_PIN_MASK _BV(PD0)
+#define SERIAL_PIN_INTERRUPT INT0_vect
+
+#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+#define SERIAL_MASTER_BUFFER_LENGTH 1
+
+// Buffers for master - slave communication
+extern volatile matrix_row_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
+extern volatile matrix_row_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
+
+void serial_master_init(void);
+void serial_slave_init(void);
+int serial_update_buffers(void);
+bool serial_slave_data_corrupt(void);
+
+#endif

keyboards/bfo9000/split_util.c

@@ -0,0 +1,86 @@
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/power.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <avr/eeprom.h>
+#include "split_util.h"
+#include "matrix.h"
+#include "keyboard.h"
+#include "config.h"
+#include "timer.h"
+
+#ifdef USE_I2C
+#  include "i2c.h"
+#else
+#  include "serial.h"
+#endif
+
+volatile bool isLeftHand = true;
+
+static void setup_handedness(void) {
+  #ifdef EE_HANDS
+    isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
+  #else
+    // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
+    #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
+      isLeftHand = !has_usb();
+    #else
+      isLeftHand = has_usb();
+    #endif
+  #endif
+}
+
+static void keyboard_master_setup(void) {
+#ifdef USE_I2C
+    i2c_master_init();
+#ifdef SSD1306OLED
+    matrix_master_OLED_init();
+#endif
+#else
+    serial_master_init();
+#endif
+}
+
+static void keyboard_slave_setup(void) {
+  timer_init();
+#ifdef USE_I2C
+    i2c_slave_init(SLAVE_I2C_ADDRESS);
+#else
+    serial_slave_init();
+#endif
+}
+
+bool has_usb(void) {
+   USBCON |= (1 << OTGPADE); //enables VBUS pad
+   _delay_us(5);
+   return (USBSTA & (1<<VBUS));  //checks state of VBUS
+}
+
+void split_keyboard_setup(void) {
+   setup_handedness();
+
+   if (has_usb()) {
+      keyboard_master_setup();
+   } else {
+      keyboard_slave_setup();
+   }
+   sei();
+}
+
+void keyboard_slave_loop(void) {
+   matrix_init();
+
+   while (1) {
+      matrix_slave_scan();
+   }
+}
+
+// this code runs before the usb and keyboard is initialized
+void matrix_setup(void) {
+    split_keyboard_setup();
+
+    if (!has_usb()) {
+        keyboard_slave_loop();
+    }
+}

keyboards/bfo9000/split_util.h

@@ -0,0 +1,20 @@
+#ifndef SPLIT_KEYBOARD_UTIL_H
+#define SPLIT_KEYBOARD_UTIL_H
+
+#include <stdbool.h>
+#include "eeconfig.h"
+
+#define SLAVE_I2C_ADDRESS           0x32
+
+extern volatile bool isLeftHand;
+
+// slave version of matix scan, defined in matrix.c
+void matrix_slave_scan(void);
+
+void split_keyboard_setup(void);
+bool has_usb(void);
+void keyboard_slave_loop(void);
+
+void matrix_master_OLED_init (void);
+
+#endif

keyboards/bigseries/bigseries.c

@@ -0,0 +1,26 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "bigseries.h"
+
+void matrix_scan_kb(void) {
+  // Looping keyboard code goes here
+  // This runs every cycle (a lot)
+  matrix_scan_user();
+#ifdef BACKLIGHT_ENABLE
+  backlight_task();
+#endif
+};

keyboards/bigseries/bigseries.h

@@ -0,0 +1,28 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef BIGSWITCH_H
+#define BIGSWITCH_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+  K00  \
+) { \
+  { K00 }  \
+}
+
+#endif

keyboards/bigseries/config.h

@@ -0,0 +1,59 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6071
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    WoodKeys.click
+#define PRODUCT         BigSeries Single Keyboard
+#define DESCRIPTION     Single key board for Novelkeys Big Series Switch
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 1
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B0 }
+#define MATRIX_COL_PINS { B4 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 50
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    false \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#ifdef RGBLIGHT_ENABLE
+#define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 5
+#endif
+
+#endif

keyboards/bigseries/keymaps/8ball/keymap.c

@@ -0,0 +1,144 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "../../bigseries.h"
+
+static const char * const ANSWERS[] = {
+// "Yes" answers
+"It is certain\n",
+"It is decidedly so\n",
+"Without a doubt\n",
+"Yes definitely\n",
+"You may rely on it\n",
+"As I see it, yes\n",
+"Most likely\n",
+"Outlook good\n",
+"Yes\n",
+"Signs point to yes\n",
+// Uncertain answers, index 10
+"Reply hazy try again\n",
+"Ask again later\n",
+"Better not tell you now\n",
+"Cannot predict now\n",
+"Concentrate and ask again\n",
+// "No" answers, index 15
+"Don't count on it\n",
+"My reply is no\n",
+"My sources say no\n",
+"Outlook not so good\n",
+"Very doubtful\n"
+};
+
+#define UNCERTAIN_BREAK 10
+#define NO_BREAK 15
+#define NUM_ANSWERS 20
+// Timeout of answer color in ms
+#define ANSWER_TIMEOUT 3000
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+KEYMAP(
+    KC_A),
+};
+
+
+void reset_rgb(void);
+
+bool initialized = 0;
+uint32_t lastTime = 0;
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE ;
+}
+
+void matrix_init_user(void) {
+  if (!initialized){
+      dprintf("Initializing in matrix_scan_user");
+      rgblight_enable();
+      reset_rgb();
+      initialized = 1;
+    }
+}
+
+void matrix_scan_user(void) {
+  if (lastTime > 0 && timer_elapsed32(lastTime) > ANSWER_TIMEOUT) {
+    lastTime = 0;
+    reset_rgb();
+  }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+  case KC_A:
+    if (record->event.pressed) {
+      uint8_t num = rand() / (RAND_MAX / NUM_ANSWERS + 1);
+      rgblight_mode(1);
+      if (num < UNCERTAIN_BREAK) {
+        rgblight_setrgb_green();
+      } else if (num < NO_BREAK) {
+        rgblight_setrgb_yellow();
+      } else {
+        rgblight_setrgb_red();
+      }
+      send_string(ANSWERS[num]);
+      lastTime = timer_read32();
+      return false;
+    }
+  }
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_KANA)) {
+
+  } else {
+
+  }
+
+}
+
+void reset_rgb(void) {
+  // This gets called on init and after the timeout for the answer color
+  // If you want to change the default color/mode, do it here
+  rgblight_sethsv_blue();
+  rgblight_mode(7);
+}

keyboards/bigseries/keymaps/default/keymap.c

@@ -0,0 +1,93 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "../../bigseries.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+KEYMAP(
+    KC_A),
+
+
+};
+
+
+bool initialized = 0;
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE ;
+}
+
+void matrix_init_user(void) {
+  if (!initialized){
+      dprintf("Initializing in matrix_scan_user");
+      rgblight_enable();
+      rgblight_mode(7);
+      rgblight_sethsv(0,255,255);
+      rgblight_setrgb(0x00, 0x00, 0xFF);
+      initialized = 1;
+    }
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+  case KC_A:
+    if (record->event.pressed) {
+      SEND_STRING("Howdy!!\n");
+      rgblight_step();
+      return false;
+    }
+  }
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_KANA)) {
+
+  } else {
+
+  }
+
+}

keyboards/bigseries/keymaps/leddance/config.h

@@ -0,0 +1,23 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#define TAPPING_TERM 400
+
+#endif

keyboards/bigseries/keymaps/leddance/keymap.c

@@ -0,0 +1,127 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "../../bigseries.h"
+#include "print.h"
+
+extern rgblight_config_t rgblight_config;
+
+enum custom_keycodes {
+  BL = SAFE_RANGE
+};
+
+enum custom_layers {
+  BASE = 0,
+  LED
+};
+
+//Tap Dance Declarations
+enum {
+  TD_TOGGLE = 0
+};
+
+void dance_toggle (qk_tap_dance_state_t *state, void *user_data) {
+  if (state->count >= 2) {
+    println("Double tapped, switching layers");
+    if (layer_state_is(LED)) {
+      layer_off(LED);
+    } else {
+      layer_on(LED);
+    }
+  } else {
+    print("Single tapped: ");
+    if (layer_state_is(LED)) {
+#ifdef RGBLIGHT_ENABLE
+      if (!rgblight_config.enable) {
+        rgblight_enable();
+      }
+      rgblight_step();
+#endif
+    } else {
+      println("Base layer, sending string");
+      SEND_STRING("This thing is BIG!!\n");
+    }
+  }
+}
+
+//Tap Dance Definitions
+qk_tap_dance_action_t tap_dance_actions[] = {
+  [TD_TOGGLE]  = ACTION_TAP_DANCE_FN(dance_toggle)
+// Other declarations would go here, separated by commas, if you have them
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[BASE] = KEYMAP(
+    TD(TD_TOGGLE)),
+[LED] = KEYMAP(
+    TD(TD_TOGGLE)
+    )
+
+
+};
+
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE ;
+}
+
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  // Nothing here, see dance_toggle
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_KANA)) {
+
+  } else {
+
+  }
+
+}

keyboards/bigseries/keymaps/leddance/rules.mk

@@ -0,0 +1 @@
+TAP_DANCE_ENABLE = yes

keyboards/bigseries/readme.md

@@ -0,0 +1,15 @@
+# Big Series Keyboard
+
+![Big Series 1-Key](https://woodkeys.click/wp-content/uploads/2017/12/woodkeys_419.jpg)
+
+A PCB for the Big Series Switch by [NovelKeys](https://novelkeys.xyz). Available in 1, 2, 3, and 4 switch versions from [Woodkeys.click](https://woodkeys.click/product-category/big-series/).
+
+Keyboard Maintainer: [Cole Markham](https://github.com/colemarkham) / [Woodkeys.click](https://woodkeys.click)  
+Hardware Supported: Big Series PCBs  
+Hardware Availability:  [Woodkeys.click](https://woodkeys.click), [NovelKeys](https://novelkeys.xyz)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make bigseries:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/bigseries/rules.mk

@@ -0,0 +1,59 @@
+#SRC += rgb_backlight.c
+
+# MCU name
+MCU = atmega32u2
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE  = no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE  = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE  = yes	# Console for debug(+400)
+COMMAND_ENABLE  = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE  = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE  = no		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE  = no  # Custom backlighting code is used, so this should not be enabled
+AUDIO_ENABLE  = no # This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below
+RGBLIGHT_ENABLE  = yes # This can be enabled if a ws2812 strip is connected to the expansion port.
+

keyboards/chibios_test/teensy_lc_onekey/instructions.md

@@ -15,7 +15,7 @@ Next, you'll need ChibiOS. For Teensies, you'll need code from two repositories:
 
 ### If you’re using git
 
-Run `git submodule sync —recursive && git submodule update --init —recursive`. This will install ChibiOS and ChibiOS-Contrib in the `/lib/` directory.
+Run `git submodule sync --recursive && git submodule update --init --recursive`. This will install ChibiOS and ChibiOS-Contrib in the `/lib/` directory.
 
 ### If you’re not using Git
 

keyboards/clueboard/2x1800/config.h

@@ -69,6 +69,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
+#define RGB_DI_PIN C6
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 16
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
 /* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
  * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
  */

keyboards/clueboard/2x1800/keymaps/default_7u/keymap.c

@@ -17,12 +17,33 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [0] = LAYOUT_7U_SPACE(
-      KC_HOME, KC_END,  KC_PGUP, KC_PGDN,       KC_ESC,    KC_F1,   KC_F2,   KC_F3,   KC_F4,     KC_F5,   KC_F6,   KC_F7,   KC_F8,     KC_F9,   KC_F10,   KC_F11,  KC_F12,        KC_PSCR, KC_SLCK, KC_PAUS, KC_INS,  \
+      KC_HOME, KC_END,  KC_PGUP, KC_PGDN,       KC_ESC,    KC_F1,   KC_F2,   KC_F3,   KC_F4,     KC_F5,   KC_F6,   KC_F7,   KC_F8,     KC_F9,   KC_F10,   KC_F11,  KC_F12,        KC_PSCR, KC_SLCK, KC_PAUS, KC_DEL,  \
                                                                                                                                                                                                                       \
       KC_PMNS, KC_NLCK, KC_PSLS, KC_PAST,      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSPC,     KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
       KC_PPLS, KC_P7,   KC_P8,   KC_P9,        KC_TAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, KC_LBRC, KC_RBRC, KC_BSLS,       KC_P7, KC_P8, KC_P9, KC_PSLS,       \
                KC_P4,   KC_P5,   KC_P6,        KC_CAPS,     KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN,    KC_QUOT, KC_ENT,         KC_P4, KC_P5, KC_P6,                \
-      KC_PENT, KC_P1,   KC_P2,   KC_P3,     KC_UP,  KC_LSFT,    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M, KC_SLSH, KC_COMM, KC_DOT,   KC_RSFT,      KC_UP,      KC_P1, KC_P2, KC_P3, KC_PENT,       \
+      KC_PENT, KC_P1,   KC_P2,   KC_P3,     KC_UP,  KC_LSFT,    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M, KC_COMM, KC_DOT, KC_SLSH,    KC_RSFT,     KC_UP,      KC_P1, KC_P2, KC_P3, KC_PENT,       \
                KC_P0,   KC_PDOT,  KC_LEFT, KC_DOWN, KC_RGHT,  KC_LCTL, KC_LALT,                  KC_SPC,                                  KC_LGUI, KC_APP,   KC_LEFT, KC_DOWN, KC_RGHT,  KC_P0, KC_PDOT               \
 )
 };
+
+
+#ifdef AUDIO_ENABLE
+  float song_one_up[][2] = SONG(ONE_UP_SOUND);
+#endif
+
+volatile uint8_t runonce = true;
+static uint16_t my_timer;
+
+void matrix_init_user(void) {
+  my_timer = timer_read();
+}
+
+void matrix_scan_user(void) {
+  if (runonce && timer_elapsed(my_timer) > 500) {
+    runonce = false;
+#ifdef AUDIO_ENABLE
+    PLAY_SONG(song_one_up);
+#endif
+  }
+}

keyboards/clueboard/2x1800/rules.mk

@@ -59,5 +59,6 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = yes            # USB Nkey Rollover
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
-AUDIO_ENABLE = no           # Audio output on port C6
+RGBLIGHT_ENABLE = no        # RGB on port C6
+AUDIO_ENABLE = no           # Audio output on port C4 and B7
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches

keyboards/converter/ibm_terminal/matrix.c

@@ -108,7 +108,7 @@ uint8_t matrix_scan(void)
                 state = RESET;
             }
             break;
-        // after reset receive keyboad ID(2 bytes)
+        // after reset receive keyboard ID(2 bytes)
         case KBD_ID0:
             if (code) {
                 state = KBD_ID1;

keyboards/cu75/cu75.h

@@ -110,8 +110,8 @@ void click(uint16_t freq, uint16_t duration);
 #define LAYOUT_iso( \
     k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, k0G, \
     k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D,      k1E, k1G, \
-    k21,   k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D,    k3D, k2F, \
-    k31,    k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C,        k2E, k3F, \
+    k21,   k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D,    k2E, k2F, \
+    k31,    k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C,        k3D, k3F, \
     k41, k42, k43, k44,  k45, k46, k47, k48, k49, k4A, k4B, k4C,      k4D, k4E, k4F, \
     k51, k52, k53,        k54,      k57,       k59,        k5A, k5B, k5C, k5D, k5E, k5F \
 ) { \

keyboards/dz60/keymaps/256k_HHKB/README.md

@@ -3,6 +3,21 @@
 
 this is my personal layer that i use on my Tina-C HHKB layout board with a DZ60 PCB.
 ---
+UPDATE (4-20-2018):
+===
+after a week of using this layout i reazlied that having the ALT button on the right side and the ALTFN layer trigger on the left isn't ideal...i still wanted to change the default HHKB style CROSS arrow cluster into a reversed T cluster since im more used to that so i swapped the ALTFN layer to the right side and the normal ALT layer is back on the left side. so now i can use the arrow cluster (which i shifted one key over to the right) with 1 hand.
+
+it feels more nataural to me this way.
+
+also i decided to change the mouse scroll keys on the mouse layer to mouse movement keys... the scrolling wasn't working out as well as i'd hoped. again, this is merely an experimental layer just to play around with mouse control.
+
+
+
+
+---
+
+Walkthrough:
+---
 
 there is 1 base layer and 4 modifyer layers:
 
@@ -21,7 +36,7 @@ BASE:
  * |-----------------------------------------------------------------------------------------+
  * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |  RShift   |  FN |
  * |-----------------------------------------------------------------------------------------+
- * |              Win  |      Alt  |            Space       |   Alt     |    LIGHTS          |
+ * |              Win  |      Alt  |            Space       |   ALTFN     |    LIGHTS        |
  * `-----------------------------------------------------------------------------------------'
  */
  ```
@@ -37,9 +52,9 @@ BASE:
  *  ,---------------------------------------------------------------------------------------------------------------------
  * |         | F1   | F2   | F3   | F4    | F5    | F6    | F7   | F8    | F9   | F10   | F11   | F12   | INSERT  |  _   |
  * |---------------------------------------------------------------------------------------------------------------------+
- * | CAPS     |   _  |   _  |   _   |    _  |    _  |    _  |    _  |    _   |  UP  |  MUTE  |  V_DEC   |  V_INC  | DEL  |
+ * | CAPS     |   _  |   _  |   _   |    _  |    _  |    _  |    _  |    _   |    _   |  UP  |  V_DEC   |  V_INC  | DEL  |
  * |---------------------------------------------------------------------------------------------------------------------+
- * | CTRL       |   _   |   _   |   _   |   _   |   _    |   _  | HOME | LEFT | DOWN | RIGHT  |   END    |    _          |
+ * | CTRL       |   _   |   _   |   _   |   _   |   _    |   _  | HOME |   END    | LEFT | DOWN | RIGHT  |    _          |
  * |---------------------------------------------------------------------------------------------------------------------+
  * | Shift         |  _   |  _   |  _   |  _   |  _   |  _   |  _   |  PREV  |    NEXT  |  PLAY  |    _       |   _      |
  * |---------------------------------------------------------------------------------------------------------------------+
@@ -61,14 +76,14 @@ also another benefit is that a lot of mice do not have horizontal control button
 (This layer is still experimental so i might change it later or modify it but so far i enjoy it)
 
 ```
-/* MOUSEFN LAYER
+ /* MOUSEFN LAYER
  *
  *  ,---------------------------------------------------------------------------------------------------------------------
  * |        |  ACC_1  |  ACC_2  |  ACC_3  |  _    |  _    |  _    |  _   |  _    |  _   |  _   |  _   |  _   | _  |  _   |
  * |---------------------------------------------------------------------------------------------------------------------+
- * | CAPS     |   _  |   _  |   _   |    _  |    _  |    _  |    _  |    _   |  WHEEL_UP  |  _  |   _   |    _   |   _   |
+ * | CAPS     |   _  |   _  |   _   |    _  |    _  |    _  |    _  |    _   |  _  |  WHEEL_UP  |   _   |    _   |   _   |
  * |---------------------------------------------------------------------------------------------------------------------+
- * | CTRL       |   _   |   _   |   _   |   _   |   _    |   _  | _ |  WH_LEFT |  WH_DOWN |  WH_RIGHT  |   _    |    _   |
+ * | CTRL       |   _   |   _   |   _   |   _   |   _    |   _  | _ |   _    |  WH_LEFT |  WH_DOWN |  WH_RIGHT  |    _   |
  * |---------------------------------------------------------------------------------------------------------------------+
  * | Shift         |  _   |  _   |  _   |  _   |  _   |  _   |  _   |   _    |    _    |    _    |    _       |   _      |
  * |---------------------------------------------------------------------------------------------------------------------+
@@ -110,4 +125,4 @@ also another benefit is that a lot of mice do not have horizontal control button
  */
  ```
  
- 
+ 

keyboards/dz60/keymaps/256k_HHKB/keymap.c

@@ -35,7 +35,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_TAB,           KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,     KC_LBRC, KC_RBRC, KC_BSPC,
 		KC_LCTL,          KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN,  KC_QUOT, KC_ENT,
 		KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,           KC_RSFT, MO(_FN),
-		            KC_LGUI,             MO(_ALTFN),                      KC_SPC,                    KC_RALT,           MO(_LIGHTS)),
+		            KC_LGUI,             KC_LALT,                      KC_SPC,                    MO(_ALTFN),           MO(_LIGHTS)),
 
 
 
@@ -46,9 +46,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *  ,---------------------------------------------------------------------------------------------------------------------
  * |         | F1   | F2   | F3   | F4    | F5    | F6    | F7   | F8    | F9   | F10   | F11   | F12   | INSERT  |  _   |
  * |---------------------------------------------------------------------------------------------------------------------+
- * | CAPS     |   _  |   _  |   _   |    _  |    _  |    _  |    _  |    _   |  UP  |  MUTE  |  V_DEC   |  V_INC  | DEL  |
+ * | CAPS     |   _  |   _  |   _   |    _  |    _  |    _  |    _  |    _   |    _   |  UP  |  V_DEC   |  V_INC  | DEL  |
  * |---------------------------------------------------------------------------------------------------------------------+
- * | CTRL       |   _   |   _   |   _   |   _   |   _    |   _  | HOME | LEFT | DOWN | RIGHT  |   END    |    _          |
+ * | CTRL       |   _   |   _   |   _   |   _   |   _    |   _  | HOME |   END    | LEFT | DOWN | RIGHT  |    _          |
  * |---------------------------------------------------------------------------------------------------------------------+
  * | Shift         |  _   |  _   |  _   |  _   |  _   |  _   |  _   |  PREV  |    NEXT  |  PLAY  |    _       |   _      |
  * |---------------------------------------------------------------------------------------------------------------------+
@@ -59,8 +59,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	[_ALTFN] = LAYOUT_hhkb(
 
 		MO(_MOUSEFN),  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,   KC_F12,  ______,  KC_PSCR,
-		KC_CAPS,          ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  KC_UP,  KC_MUTE,  KC_VOLD,   KC_VOLU,  KC_DEL,
-		______,             ______,  ______,  ______,  ______,  ______,  ______,  KC_HOME,   KC_LEFT,   KC_DOWN,   KC_RIGHT,  KC_END, ______,
+		KC_CAPS,          ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  KC_UP,  KC_VOLD,   KC_VOLU,  KC_DEL,
+		______,             ______,  ______,  ______,  ______,  ______,  ______,  KC_HOME,  KC_END, KC_LEFT,   KC_DOWN,   KC_RIGHT, ______,
 		______,  ______,   ______,  ______,  ______, ______, ______,   ______,  ______,  KC_MPRV,  KC_MNXT, KC_MPLY,     ______,  ______,
 		         ______,           ______,                    ______,                              ______,            ______),
 
@@ -75,9 +75,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *  ,---------------------------------------------------------------------------------------------------------------------
  * |        |  ACC_1  |  ACC_2  |  ACC_3  |  _    |  _    |  _    |  _   |  _    |  _   |  _   |  _   |  _   | _  |  _   |
  * |---------------------------------------------------------------------------------------------------------------------+
- * | CAPS     |   _  |   _  |   _   |    _  |    _  |    _  |    _  |    _   |  WHEEL_UP  |  _  |   _   |    _   |   _   |
+ * | CAPS     |   _  |   _  |   _   |    _  |    _  |    _  |    _  |    _   |  _  |  WHEEL_UP  |   _   |    _   |   _   |
  * |---------------------------------------------------------------------------------------------------------------------+
- * | CTRL       |   _   |   _   |   _   |   _   |   _    |   _  | _ |  WH_LEFT |  WH_DOWN |  WH_RIGHT  |   _    |    _   |
+ * | CTRL       |   _   |   _   |   _   |   _   |   _    |   _  | _ |   _    |  WH_LEFT |  WH_DOWN |  WH_RIGHT  |    _   |
  * |---------------------------------------------------------------------------------------------------------------------+
  * | Shift         |  _   |  _   |  _   |  _   |  _   |  _   |  _   |   _    |    _    |    _    |    _       |   _      |
  * |---------------------------------------------------------------------------------------------------------------------+
@@ -89,8 +89,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	[_MOUSEFN] = LAYOUT_hhkb(
 
 		______,  KC_ACL0,   KC_ACL1,   KC_ACL2,   ______,   ______,   ______,   ______,   ______,   ______,   ______,  ______,   ______,  ______,  ______,
-		______,          ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  KC_WH_U,  ______,  ______,   ______,  ______,
-		______,             ______,  ______,  ______,  ______,  ______,  ______,  ______,     KC_WH_L,   KC_WH_D,  KC_WH_R, ______,  ______,
+		______,          ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  KC_MS_UP,    ______,   ______,  ______,
+		______,             ______,  ______,  ______,  ______,  ______,  ______,  ______,   ______,  KC_MS_LEFT,   KC_MS_DOWN,  KC_MS_RIGHT,   ______,
 		______,  ______,   ______,  ______,  ______, ______, ______,   ______,  ______,  ______,  ______, ______,     ______,  ______,
 		         ______,           ______,                    ______,                              ______,            ______),
 

keyboards/dz60/keymaps/default/keymap.c

@@ -59,3 +59,11 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
       break;
   }
 }
+
+void led_set_user(uint8_t usb_led) {
+    if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+        DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+    } else {
+        DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+    }
+}

keyboards/dz60/keymaps/eric/keymap.c

@@ -0,0 +1,92 @@
+#include "dz60.h"
+
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Layer 0
+* ,-----------------------------------------------------------------------------------------.
+* | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  \  |  ~  |
+* |-----------------------------------------------------------------------------------------+
+* | Tab   |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  | Bkspc   |
+* |-----------------------------------------------------------------------------------------+
+* | Ctrl    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+* |-----------------------------------------------------------------------------------------+
+* | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |   /   |  Shift   | Fn |
+* |-----------------------------------------------------------------------------------------+
+* | Caps  |  GUI |  Alt |                    Space               |   Alt   |  GUI  |  Ctrl  |
+* `-----------------------------------------------------------------------------------------'
+*/
+
+	LAYOUT(
+		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, 
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, 
+		KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, 
+		KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
+		KC_CAPS, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, KC_RGUI, KC_RCTL),
+
+
+
+ /* Layer 1
+* ,-----------------------------------------------------------------------------------------.
+* |     | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 | INS | Del |
+* |-----------------------------------------------------------------------------------------+
+* |      | PGUP | UP | PGDN | HOME | &  |  ~  |     |     |     | Prnt | UP | Del |  Bkspc  |
+* |-----------------------------------------------------------------------------------------+
+* |        | LEFT | DWN | RGHT | END |  *  |    |    | PGUP | HOME | LEFT | RGHT |          |
+* |-----------------------------------------------------------------------------------------+
+* |           |  _  |  +  |  (  |  )  |  |  |     |     | PGDN | END |  DWN  |        |     |
+* |-----------------------------------------------------------------------------------------+
+* |       |      |       |                                         |        |      |        |
+* `-----------------------------------------------------------------------------------------'
+*/ 
+
+
+	LAYOUT(
+		KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, 
+		KC_TRNS, KC_PGUP, KC_UP, KC_PGDN, KC_HOME, KC_AMPR, KC_TILD, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_UP, KC_DEL, KC_BSPC, 
+		KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, KC_ASTR, KC_TRNS, KC_TRNS, KC_PGUP, KC_HOME, KC_LEFT, KC_RGHT, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_UNDS, KC_PLUS, KC_LPRN, KC_RPRN, KC_PIPE, KC_TRNS, KC_TRNS, KC_PGDN, KC_END, KC_DOWN, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2), KC_TRNS, KC_TRNS, KC_TRNS),
+
+	LAYOUT(
+		RESET, KC_A, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, 
+		KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, 
+		KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, 
+		KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, 
+		KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
+};
+
+enum function_id {
+    SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0] = ACTION_FUNCTION(SHIFT_ESC)
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case SHIFT_ESC:
+		shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+		if (record->event.pressed) {
+			if (shift_esc_shift_mask) {
+			  add_key(KC_GRV);
+			  send_keyboard_report();
+			} else {
+			  add_key(KC_ESC);
+			  send_keyboard_report();
+			}
+		} else {
+			if (shift_esc_shift_mask) {
+			  del_key(KC_GRV);
+			  send_keyboard_report();
+			} else {
+			  del_key(KC_ESC);
+			  send_keyboard_report();
+			}
+		}
+		break;
+  }
+}

keyboards/dz60/keymaps/iso_vim_arrow/README.md

@@ -0,0 +1,6 @@
+# ISO layout with VIM style arrow cluster
+
+This layout is ISO-DE and similar to a standard 60 ISO layout. There are vim style arrow keys on the function layer and in the bottom right corner of the main layer.
+
+![Layout](https://i.imgur.com/Wu8VT43.png)
+

keyboards/dz60/keymaps/iso_vim_arrow/keymap.c

@@ -0,0 +1,68 @@
+#include QMK_KEYBOARD_H
+
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* ISO VIM arrow
+* ,-----------------------------------------------------------------------------------------.
+* | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  ß  |  ´  |   BSPC    |
+* |-----------------------------------------------------------------------------------------+
+* | Tab    |  Q  |  W  |  E  |  R  |  T  |  Z  |  U  |  I  |  O  |  P  |  P  |  Ü  | *  |   |
+* |-------------------------------------------------------------------------------------|   +
+* | Layer_1    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  Ö  |  Ä |  # |Enter |
+* |-----------------------------------------------------------------------------------------+
+* | Shift|  < |  Y  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  .  |  -  |  RShift   |
+* |-----------------------------------------------------------------------------------------+
+* | LCtrl |  LGUI  |  LAlt  |          Space           |  RAlt | Left |  Down | Up  | Right |
+* `-----------------------------------------------------------------------------------------'
+*/
+	LAYOUT(
+		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+		MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+		KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_NO,
+    KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT),
+
+
+	LAYOUT(
+		KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_DEL,
+		KC_NO, KC_NO, KC_NO, KC_NO, RESET, KC_NO, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_PSCR, KC_NO, KC_NO, KC_NO,
+		KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_END, KC_DEL, KC_NO,
+		KC_LSFT, BL_TOGG, KC_APP, KC_PAUS, KC_INS, KC_NO, KC_MPLY, KC_MSTP, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO, KC_RSFT, KC_NO,
+		KC_LCTL, KC_LGUI, KC_LALT, KC_BSPC, KC_BSPC, KC_BSPC, KC_DEL, KC_HOME, KC_PGDN, KC_PGUP, KC_END),
+
+};
+
+enum function_id {
+    SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(SHIFT_ESC),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case SHIFT_ESC:
+      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+  }
+}

keyboards/dz60/keymaps/iso_vim_arrow/rules.mk

@@ -0,0 +1,15 @@
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = no
+AUTO_SHIFT_ENABLE = no # If the time depressed is greater than or equal to the AUTO_SHIFT_TIMEOUT, then a shifted version of the key is emitted. If the time is less than the AUTO_SHIFT_TIMEOUT time, then the normal state is emitted
+TAP_DANCE_ENABLE = no

keyboards/eagle_viper/v2/v2.h

@@ -32,7 +32,7 @@
   { K0A, K0B, K0C, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K0J,   KC_NO, K0K, K0L,   K0M, K0N,   K0O    }  \
 }
 
-#define LAYOUT_eagle( \
+#define LAYOUT_60_ansi( \
     K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M,      K4O, \
     K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M,      K3O, \
     K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L,           K2O, \
@@ -74,3 +74,5 @@
   { KC_NO, K0B,   K0C, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K0J,   KC_NO, KC_NO, KC_NO, K0M, K0N,   KC_NO    }  \
 }
 #endif
+
+#define LAYOUT_eagle LAYOUT_60_ansi

keyboards/ergodone/ergodone.h

@@ -99,6 +99,28 @@ inline void ergodox_led_all_set(uint8_t n)              {}
     { KC_NO, k51, k52, k53, k54, k55,   k56,      k57,   k58,   k59, k5A, k5B, k5C, KC_NO  } \
    }
 
+#define KEYMAP_PRETTY(                                                                                        \
+    /* left hand, spatial positions */     /* right hand, spatial positions */                         \
+    L00,L01,L02,L03,L04,L05,L06,               R00,R01,R02,R03,R04,R05,R06,                            \
+    L10,L11,L12,L13,L14,L15,L16,               R10,R11,R12,R13,R14,R15,R16,                            \
+    L20,L21,L22,L23,L24,L25,                       R21,R22,R23,R24,R25,R26,                            \
+    L30,L31,L32,L33,L34,L35,L36,               R30,R31,R32,R33,R34,R35,R36,                            \
+    L40,L41,L42,L43,L44,                               R42,R43,R44,R45,R46,                            \
+                            L55,L56,       R50,R51,                                                    \
+                                L54,       R52,                                                        \
+                        L53,L52,L51,       R55,R54,R53 )                                               \
+                                          \
+   /* matrix positions */                 \
+   {                                                                            \
+    {   L00,L01,L02,L03,L04,L05,L06,            R00,R01,R02,R03,R04,R05,R06  }, \
+    {   L10,L11,L12,L13,L14,L15,L16,            R10,R11,R12,R13,R14,R15,R16  }, \
+    {   L20,L21,L22,L23,L24,L25,KC_NO,        KC_NO,R21,R22,R23,R24,R25,R26  }, \
+    {   L30,L31,L32,L33,L34,L35,L36,            R30,R31,R32,R33,R34,R35,R36  }, \
+    { L40,L41,L42,L43,L44,KC_NO,KC_NO,    KC_NO,KC_NO,R42,R43,R44,R45,R46    }, \
+    { KC_NO,L51,L52,L53,L54,L55,L56,          R50,R51,R52,R53,R54,R55,KC_NO  }  \
+   }
+
 #define LAYOUT_ergodox KEYMAP
+#define LAYOUT_ergodox_pretty KEYMAP_PRETTY
 
 #endif

keyboards/ergodone/info.json

@@ -0,0 +1,15 @@
+{
+    "keyboard_name": "Ergodone",
+    "maintainer": "Yu He",
+    "width": 19.5,
+    "height": 9.375,
+
+    "layouts": {
+        "LAYOUT_ergodox": {
+            "layout": [{"x":0, "y":0, "w":1.5}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":14.5, "y":0}, {"x":15.5, "y":0, "w":1.5}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1, "h":1.5}, {"x":9.5, "y":1, "h":1.5}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":14.5, "y":1}, {"x":15.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.5}, {"x":1.5, "y":2}, {"x":2.5, "y":2}, {"x":3.5, "y":2}, {"x":4.5, "y":2}, {"x":5.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2}, {"x":14.5, "y":2}, {"x":15.5, "y":2, "w":1.5}, {"x":6.5, "y":2.5, "h":1.5}, {"x":9.5, "y":2.5, "h":1.5}, {"x":0, "y":3, "w":1.5}, {"x":1.5, "y":3}, {"x":2.5, "y":3}, {"x":3.5, "y":3}, {"x":4.5, "y":3}, {"x":5.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}, {"x":12.5, "y":3}, {"x":13.5, "y":3}, {"x":14.5, "y":3}, {"x":15.5, "y":3, "w":1.5}, {"x":0.5, "y":4}, {"x":1.5, "y":4}, {"x":2.5, "y":4}, {"x":3.5, "y":4}, {"x":4.5, "y":4}, {"x":11.5, "y":4}, {"x":12.5, "y":4}, {"x":13.5, "y":4}, {"x":14.5, "y":4}, {"x":15.5, "y":4}, {"x":6, "y":5}, {"x":7, "y":5}, {"x":9, "y":5}, {"x":10, "y":5}, {"x":5, "y":6, "h":2}, {"x":6, "y":6, "h":2}, {"x":7, "y":6}, {"x":9, "y":6}, {"x":10, "y":6, "h":2}, {"x":11, "y":6, "h":2}, {"x":7, "y":7}, {"x":9, "y":7}]
+        },
+        "LAYOUT_ergodox_pretty": {
+            "layout": [{"x":0, "y":0, "w":1.5}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":14.5, "y":0}, {"x":15.5, "y":0, "w":1.5}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1, "h":1.5}, {"x":9.5, "y":1, "h":1.5}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":14.5, "y":1}, {"x":15.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.5}, {"x":1.5, "y":2}, {"x":2.5, "y":2}, {"x":3.5, "y":2}, {"x":4.5, "y":2}, {"x":5.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2}, {"x":14.5, "y":2}, {"x":15.5, "y":2, "w":1.5}, {"x":6.5, "y":2.5, "h":1.5}, {"x":9.5, "y":2.5, "h":1.5}, {"x":0, "y":3, "w":1.5}, {"x":1.5, "y":3}, {"x":2.5, "y":3}, {"x":3.5, "y":3}, {"x":4.5, "y":3}, {"x":5.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}, {"x":12.5, "y":3}, {"x":13.5, "y":3}, {"x":14.5, "y":3}, {"x":15.5, "y":3, "w":1.5}, {"x":0.5, "y":4}, {"x":1.5, "y":4}, {"x":2.5, "y":4}, {"x":3.5, "y":4}, {"x":4.5, "y":4}, {"x":11.5, "y":4}, {"x":12.5, "y":4}, {"x":13.5, "y":4}, {"x":14.5, "y":4}, {"x":15.5, "y":4}, {"x":6, "y":5}, {"x":7, "y":5}, {"x":9, "y":5}, {"x":10, "y":5}, {"x":5, "y":6, "h":2}, {"x":6, "y":6, "h":2}, {"x":7, "y":6}, {"x":9, "y":6}, {"x":10, "y":6, "h":2}, {"x":11, "y":6, "h":2}, {"x":7, "y":7}, {"x":9, "y":7}]
+        }
+    }
+}

keyboards/ergodox_ez/ergodox_ez.h

@@ -250,5 +250,7 @@ inline void ergodox_led_all_set(uint8_t n)
 
 #define LAYOUT_ergodox KEYMAP
 #define LAYOUT_ergodox_pretty KEYMAP_PRETTY
+#define LAYOUT_ergodox_80 KEYMAP_80
+#define LAYOUT_ergodox_pretty_80 KEYMAP_PRETTY_80
 
 #endif

keyboards/ergodox_ez/info.json

@@ -1,9 +1,10 @@
 {
-    "keyboard_name": "ErgoDox EZ", 
-    "url": "ergodox-ez.com", 
-    "maintainer": "erez", 
-    "width": 19.5, 
-    "height": 9.375, 
+    "keyboard_name": "ErgoDox EZ",
+    "url": "ergodox-ez.com",
+    "maintainer": "erez",
+    "width": 19.5,
+    "height": 9.375,
+
     "layouts": {
         "LAYOUT_ergodox": {
             "layout": [{"x":0, "y":0, "w":1.5}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":14.5, "y":0}, {"x":15.5, "y":0, "w":1.5}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1, "h":1.5}, {"x":9.5, "y":1, "h":1.5}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":14.5, "y":1}, {"x":15.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.5}, {"x":1.5, "y":2}, {"x":2.5, "y":2}, {"x":3.5, "y":2}, {"x":4.5, "y":2}, {"x":5.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2}, {"x":14.5, "y":2}, {"x":15.5, "y":2, "w":1.5}, {"x":6.5, "y":2.5, "h":1.5}, {"x":9.5, "y":2.5, "h":1.5}, {"x":0, "y":3, "w":1.5}, {"x":1.5, "y":3}, {"x":2.5, "y":3}, {"x":3.5, "y":3}, {"x":4.5, "y":3}, {"x":5.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}, {"x":12.5, "y":3}, {"x":13.5, "y":3}, {"x":14.5, "y":3}, {"x":15.5, "y":3, "w":1.5}, {"x":0.5, "y":4}, {"x":1.5, "y":4}, {"x":2.5, "y":4}, {"x":3.5, "y":4}, {"x":4.5, "y":4}, {"x":11.5, "y":4}, {"x":12.5, "y":4}, {"x":13.5, "y":4}, {"x":14.5, "y":4}, {"x":15.5, "y":4}, {"x":6, "y":5}, {"x":7, "y":5}, {"x":9, "y":5}, {"x":10, "y":5}, {"x":5, "y":6, "h":2}, {"x":6, "y":6, "h":2}, {"x":7, "y":6}, {"x":9, "y":6}, {"x":10, "y":6, "h":2}, {"x":11, "y":6, "h":2}, {"x":7, "y":7}, {"x":9, "y":7}]
@@ -11,10 +12,10 @@
         "LAYOUT_ergodox_pretty": {
             "layout": [{"x":0, "y":0, "w":1.5}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":14.5, "y":0}, {"x":15.5, "y":0, "w":1.5}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1, "h":1.5}, {"x":9.5, "y":1, "h":1.5}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":14.5, "y":1}, {"x":15.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.5}, {"x":1.5, "y":2}, {"x":2.5, "y":2}, {"x":3.5, "y":2}, {"x":4.5, "y":2}, {"x":5.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2}, {"x":14.5, "y":2}, {"x":15.5, "y":2, "w":1.5}, {"x":6.5, "y":2.5, "h":1.5}, {"x":9.5, "y":2.5, "h":1.5}, {"x":0, "y":3, "w":1.5}, {"x":1.5, "y":3}, {"x":2.5, "y":3}, {"x":3.5, "y":3}, {"x":4.5, "y":3}, {"x":5.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}, {"x":12.5, "y":3}, {"x":13.5, "y":3}, {"x":14.5, "y":3}, {"x":15.5, "y":3, "w":1.5}, {"x":0.5, "y":4}, {"x":1.5, "y":4}, {"x":2.5, "y":4}, {"x":3.5, "y":4}, {"x":4.5, "y":4}, {"x":11.5, "y":4}, {"x":12.5, "y":4}, {"x":13.5, "y":4}, {"x":14.5, "y":4}, {"x":15.5, "y":4}, {"x":6, "y":5}, {"x":7, "y":5}, {"x":9, "y":5}, {"x":10, "y":5}, {"x":5, "y":6, "h":2}, {"x":6, "y":6, "h":2}, {"x":7, "y":6}, {"x":9, "y":6}, {"x":10, "y":6, "h":2}, {"x":11, "y":6, "h":2}, {"x":7, "y":7}, {"x":9, "y":7}]
         },
-        "KEYMAP_80": {
+        "LAYOUT_ergodox_80": {
             "layout": [{"x":0, "y":0, "w":1.5}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":14.5, "y":0}, {"x":15.5, "y":0, "w":1.5}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1, "h":1.5}, {"x":9.5, "y":1, "h":1.5}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":14.5, "y":1}, {"x":15.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.5}, {"x":1.5, "y":2}, {"x":2.5, "y":2}, {"x":3.5, "y":2}, {"x":4.5, "y":2}, {"x":5.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2}, {"x":14.5, "y":2}, {"x":15.5, "y":2, "w":1.5}, {"x":6.5, "y":2.5, "h":1.5}, {"x":9.5, "y":2.5, "h":1.5}, {"x":0, "y":3, "w":1.5}, {"x":1.5, "y":3}, {"x":2.5, "y":3}, {"x":3.5, "y":3}, {"x":4.5, "y":3}, {"x":5.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}, {"x":12.5, "y":3}, {"x":13.5, "y":3}, {"x":14.5, "y":3}, {"x":15.5, "y":3, "w":1.5}, {"x":0.5, "y":4}, {"x":1.5, "y":4}, {"x":2.5, "y":4}, {"x":3.5, "y":4}, {"x":4.5, "y":4}, {"x":11.5, "y":4}, {"x":12.5, "y":4}, {"x":13.5, "y":4}, {"x":14.5, "y":4}, {"x":15.5, "y":4}, {"x":6, "y":5}, {"x":7, "y":5}, {"x":9, "y":5}, {"x":10, "y":5}, {"x":5, "y":6}, {"x":6, "y":6}, {"x":7, "y":6}, {"x":9, "y":6}, {"x":10, "y":6}, {"x":11, "y":6}, {"x":5, "y":7}, {"x":6, "y":7}, {"x":7, "y":7}, {"x":9, "y":7}, {"x":10, "y":7}, {"x":11, "y":7}]
         },
-        "KEYMAP_PRETTY_80": {
+        "LAYOUT_ergodox_pretty_80": {
             "layout": [{"x":0, "y":0, "w":1.5}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":14.5, "y":0}, {"x":15.5, "y":0, "w":1.5}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1, "h":1.5}, {"x":9.5, "y":1, "h":1.5}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":14.5, "y":1}, {"x":15.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.5}, {"x":1.5, "y":2}, {"x":2.5, "y":2}, {"x":3.5, "y":2}, {"x":4.5, "y":2}, {"x":5.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2}, {"x":14.5, "y":2}, {"x":15.5, "y":2, "w":1.5}, {"x":6.5, "y":2.5, "h":1.5}, {"x":9.5, "y":2.5, "h":1.5}, {"x":0, "y":3, "w":1.5}, {"x":1.5, "y":3}, {"x":2.5, "y":3}, {"x":3.5, "y":3}, {"x":4.5, "y":3}, {"x":5.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}, {"x":12.5, "y":3}, {"x":13.5, "y":3}, {"x":14.5, "y":3}, {"x":15.5, "y":3, "w":1.5}, {"x":0.5, "y":4}, {"x":1.5, "y":4}, {"x":2.5, "y":4}, {"x":3.5, "y":4}, {"x":4.5, "y":4}, {"x":11.5, "y":4}, {"x":12.5, "y":4}, {"x":13.5, "y":4}, {"x":14.5, "y":4}, {"x":15.5, "y":4}, {"x":6, "y":5}, {"x":7, "y":5}, {"x":9, "y":5}, {"x":10, "y":5}, {"x":5, "y":6}, {"x":6, "y":6}, {"x":7, "y":6}, {"x":9, "y":6}, {"x":10, "y":6}, {"x":11, "y":6}, {"x":5, "y":7}, {"x":6, "y":7}, {"x":7, "y":7}, {"x":9, "y":7}, {"x":10, "y":7}, {"x":11, "y":7}]
         }
     }

keyboards/ergodox_ez/readme.md

@@ -10,7 +10,8 @@ Linux page].  Some distributions provide a binary, maybe called
 
 To flash the firmware:
 
-  - Build the firmware with `make keymapname`, for example `make default`
+  - Build the firmware with `make <keyboardname>:<keymapname>`, for example `make ergodox_ez:default`
+
   - This will result in a hex file called `ergodox_ez_keymapname.hex`, e.g.
     `ergodox_ez_default.hex`
 
@@ -19,10 +20,12 @@ To flash the firmware:
   - Load the .hex file into it.
 
   - Press the Reset button by inserting a paperclip gently into the reset hole
-    in the top right corder.
+    in the top right corner.
 
   - Click the button in the Teensy app to download the firmware.
 
+See also [video demonstration](https://www.youtube.com/watch?v=9PyiGUO9_KQ) using Teensy in auto mode.
+
 To flash with ´teensy-loader-cli´:
 
   - Build the firmware with `make keymapname`, for example `make default`

keyboards/ergodox_infinity/ergodox_infinity.h

@@ -118,6 +118,40 @@ inline void ergodox_led_all_set(uint8_t n) {
     { B80,   B81,   B82,   B83,   B84 }  \
 }
 
+#define KEYMAP_PRETTY(                                                                      \
+    /* left hand, spatial positions */     /* right hand, spatial positions */              \
+    A80, A70, A60, A50, A40, A30, A20,               B20, B30, B40, B50, B60, B70, B80,     \
+    A81, A71, A61, A51, A41, A31, A21,               B21, B31, B41, B51, B61, B71, B81,     \
+    A82, A72, A62, A52, A42, A32,                         B32, B42, B52, B62, B72, B82,     \
+    A83, A73, A63, A53, A43, A33, A23,               B23, B33, B43, B53, B63, B73, B83,     \
+    A84, A74, A64, A54, A44,                                   B44, B54, B64, B74, B84,     \
+                                  A13, A03,     B03, B13,                                   \
+                                       A04,     B04,                                        \
+                             A34, A24, A14,     B14, B24, B34 )                             \
+                                                                                            \
+   /* matrix positions */                \
+ {                                       \
+    { KC_NO, KC_NO, KC_NO, A03,   A04 }, \
+    { KC_NO, KC_NO, KC_NO, A13,   A14 }, \
+    { A20,   A21,   KC_NO, A23,   A24 }, \
+    { A30,   A31,   A32,   A33,   A34 }, \
+    { A40,   A41,   A42,   A43,   A44 }, \
+    { A50,   A51,   A52,   A53,   A54 }, \
+    { A60,   A61,   A62,   A63,   A64 }, \
+    { A70,   A71,   A72,   A73,   A74 }, \
+    { A80,   A81,   A82,   A83,   A84 }, \
+    { KC_NO, KC_NO, KC_NO, B03,   B04 }, \
+    { KC_NO, KC_NO, KC_NO, B13,   B14 }, \
+    { B20,   B21,   KC_NO, B23,   B24 }, \
+    { B30,   B31,   B32,   B33,   B34 }, \
+    { B40,   B41,   B42,   B43,   B44 }, \
+    { B50,   B51,   B52,   B53,   B54 }, \
+    { B60,   B61,   B62,   B63,   B64 }, \
+    { B70,   B71,   B72,   B73,   B74 }, \
+    { B80,   B81,   B82,   B83,   B84 }  \
+}
+
 #define LAYOUT_ergodox KEYMAP
+#define LAYOUT_ergodox_pretty KEYMAP_PRETTY
 
 #endif /* KEYBOARDS_ERGODOX_INFINITY_INFINITY_H_ */

keyboards/ergodox_infinity/info.json

@@ -3,8 +3,11 @@
     "width": 19.5,
     "height": 9.375,
     "layouts": {
-        "KEYMAP": {
+        "LAYOUT_ergodox": {
             "layout": [{"label":"#", "x":3.5, "y":0}, {"label":"*", "x":15, "y":0}, {"label":"@", "x":2.5, "y":0.125}, {"label":"$", "x":4.5, "y":0.125}, {"label":"&", "x":14, "y":0.125}, {"label":"(", "x":16, "y":0.125}, {"label":"%", "x":5.5, "y":0.25}, {"x":6.5, "y":0.25}, {"x":12, "y":0.25}, {"label":"^", "x":13, "y":0.25}, {"x":0, "y":0.375, "w":1.5}, {"label":"!", "x":1.5, "y":0.375}, {"label":")", "x":17, "y":0.375}, {"x":18, "y":0.375, "w":1.5}, {"label":"E", "x":3.5, "y":1}, {"label":"I", "x":15, "y":1}, {"label":"W", "x":2.5, "y":1.125}, {"label":"R", "x":4.5, "y":1.125}, {"label":"U", "x":14, "y":1.125}, {"label":"O", "x":16, "y":1.125}, {"label":"T", "x":5.5, "y":1.25}, {"x":6.5, "y":1.25, "h":1.5}, {"x":12, "y":1.25, "h":1.5}, {"label":"Y", "x":13, "y":1.25}, {"x":0, "y":1.375, "w":1.5}, {"label":"Q", "x":1.5, "y":1.375}, {"label":"P", "x":17, "y":1.375}, {"x":18, "y":1.375, "w":1.5}, {"label":"D", "x":3.5, "y":2}, {"label":"K", "x":15, "y":2}, {"label":"S", "x":2.5, "y":2.125}, {"label":"F", "x":4.5, "y":2.125}, {"label":"J", "x":14, "y":2.125}, {"label":"L", "x":16, "y":2.125}, {"label":"G", "x":5.5, "y":2.25}, {"label":"H", "x":13, "y":2.25}, {"x":0, "y":2.375, "w":1.5}, {"label":"A", "x":1.5, "y":2.375}, {"label":":", "x":17, "y":2.375}, {"x":18, "y":2.375, "w":1.5}, {"x":6.5, "y":2.75, "h":1.5}, {"x":12, "y":2.75, "h":1.5}, {"label":"C", "x":3.5, "y":3}, {"label":"<", "x":15, "y":3}, {"label":"X", "x":2.5, "y":3.125}, {"label":"V", "x":4.5, "y":3.125}, {"label":"M", "x":14, "y":3.125}, {"label":">", "x":16, "y":3.125}, {"label":"B", "x":5.5, "y":3.25}, {"label":"N", "x":13, "y":3.25}, {"x":0, "y":3.375, "w":1.5}, {"label":"Z", "x":1.5, "y":3.375}, {"label":"?", "x":17, "y":3.375}, {"x":18, "y":3.375, "w":1.5}, {"x":3.5, "y":4}, {"x":15, "y":4}, {"x":2.5, "y":4.125}, {"x":4.5, "y":4.125}, {"x":14, "y":4.125}, {"x":16, "y":4.125}, {"x":0.5, "y":4.375}, {"x":1.5, "y":4.375}, {"x":17, "y":4.375}, {"x":18, "y":4.375}, {"x":1, "y":4.375}, {"x":2, "y":4.375}, {"x":0, "y":5.375, "h":2}, {"x":1, "y":5.375, "h":2}, {"x":2, "y":5.375}, {"x":2, "y":6.375}, {"x":-3.0, "y":6.375}, {"x":-2, "y":6.375}, {"x":-3.0, "y":7.375}, {"x":-2, "y":7.375, "h":2}, {"x":-1.0, "y":7.375, "h":2}, {"x":-3.0, "y":8.375}]
+        },
+        "LAYOUT_ergodox_pretty": {
+          "layout": [{"label":"#", "x":3.5, "y":0}, {"label":"*", "x":15, "y":0}, {"label":"@", "x":2.5, "y":0.125}, {"label":"$", "x":4.5, "y":0.125}, {"label":"&", "x":14, "y":0.125}, {"label":"(", "x":16, "y":0.125}, {"label":"%", "x":5.5, "y":0.25}, {"x":6.5, "y":0.25}, {"x":12, "y":0.25}, {"label":"^", "x":13, "y":0.25}, {"x":0, "y":0.375, "w":1.5}, {"label":"!", "x":1.5, "y":0.375}, {"label":")", "x":17, "y":0.375}, {"x":18, "y":0.375, "w":1.5}, {"label":"E", "x":3.5, "y":1}, {"label":"I", "x":15, "y":1}, {"label":"W", "x":2.5, "y":1.125}, {"label":"R", "x":4.5, "y":1.125}, {"label":"U", "x":14, "y":1.125}, {"label":"O", "x":16, "y":1.125}, {"label":"T", "x":5.5, "y":1.25}, {"x":6.5, "y":1.25, "h":1.5}, {"x":12, "y":1.25, "h":1.5}, {"label":"Y", "x":13, "y":1.25}, {"x":0, "y":1.375, "w":1.5}, {"label":"Q", "x":1.5, "y":1.375}, {"label":"P", "x":17, "y":1.375}, {"x":18, "y":1.375, "w":1.5}, {"label":"D", "x":3.5, "y":2}, {"label":"K", "x":15, "y":2}, {"label":"S", "x":2.5, "y":2.125}, {"label":"F", "x":4.5, "y":2.125}, {"label":"J", "x":14, "y":2.125}, {"label":"L", "x":16, "y":2.125}, {"label":"G", "x":5.5, "y":2.25}, {"label":"H", "x":13, "y":2.25}, {"x":0, "y":2.375, "w":1.5}, {"label":"A", "x":1.5, "y":2.375}, {"label":":", "x":17, "y":2.375}, {"x":18, "y":2.375, "w":1.5}, {"x":6.5, "y":2.75, "h":1.5}, {"x":12, "y":2.75, "h":1.5}, {"label":"C", "x":3.5, "y":3}, {"label":"<", "x":15, "y":3}, {"label":"X", "x":2.5, "y":3.125}, {"label":"V", "x":4.5, "y":3.125}, {"label":"M", "x":14, "y":3.125}, {"label":">", "x":16, "y":3.125}, {"label":"B", "x":5.5, "y":3.25}, {"label":"N", "x":13, "y":3.25}, {"x":0, "y":3.375, "w":1.5}, {"label":"Z", "x":1.5, "y":3.375}, {"label":"?", "x":17, "y":3.375}, {"x":18, "y":3.375, "w":1.5}, {"x":3.5, "y":4}, {"x":15, "y":4}, {"x":2.5, "y":4.125}, {"x":4.5, "y":4.125}, {"x":14, "y":4.125}, {"x":16, "y":4.125}, {"x":0.5, "y":4.375}, {"x":1.5, "y":4.375}, {"x":17, "y":4.375}, {"x":18, "y":4.375}, {"x":1, "y":4.375}, {"x":2, "y":4.375}, {"x":0, "y":5.375, "h":2}, {"x":1, "y":5.375, "h":2}, {"x":2, "y":5.375}, {"x":2, "y":6.375}, {"x":-3.0, "y":6.375}, {"x":-2, "y":6.375}, {"x":-3.0, "y":7.375}, {"x":-2, "y":7.375, "h":2}, {"x":-1.0, "y":7.375, "h":2}, {"x":-3.0, "y":8.375}]
         }
-    }
+  }
 }

keyboards/ergodox_infinity/keymaps/input_club/README.md

@@ -0,0 +1,23 @@
+# Input Club ErgoDox Infinity Layout
+
+A basic ErgoDox layout that duplicates the default Input Club layout
+
+## Features
+
+Base Layers
+
+- QWERTY
+- Function Keys
+- Numpad
+
+## Building and flashing
+
+1. Put your board in DFU mode with either the button on the bottom, or with a software key in your current firmware
+2. Flash left half:
+    ```bash
+    make ergodox_infinity:input_club:dfu-util
+    ```
+3. Flash right half:
+    ```bash
+    make ergodox_infinity:input_club:dfu-util MASTER=right
+    ```

keyboards/ergodox_infinity/keymaps/input_club/keymap.c

@@ -0,0 +1,267 @@
+#include QMK_KEYBOARD_H
+#include "debug.h"
+#include "action_layer.h"
+#include "version.h"
+
+#define L0 0 // default layer
+#define L1 1
+#define L2 2
+
+enum custom_keycodes {
+  PLACEHOLDER = SAFE_RANGE, // can always be here
+  EPRM,
+  VRSN,
+  RGB_SLD
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[L0] = LAYOUT_ergodox(  // layer 0 : default
+/*
+ * left hand
+ *    +-------+-----+-----+-----+-----+-----+-----+
+ *    |   =   |  0  |  2  |  3  |  4  |  5  | ESC |
+ *    +-------+-----+-----+-----+-----+-----+-----+
+ *    |   \   |  Q  |  W  |  E  |  R  |  T  |LCK-1|
+ *    +-------+-----+-----+-----+-----+-----+     |
+ *    |  TAB  |  A  |  S  |  D  |  F  |  G  +-----+
+ *    +-------+-----+-----+-----+-----+-----+ f1  |
+ *    | LSHIFT|  Z  |  X  |  C  |  V  |  B  |     |
+ *    +-+-----+-----+-----+-----+-----+-----+-----+
+ *      |LGUI |  `  |  \  |LEFT |RIGHT|
+ *      +-----+-----+-----+-----+-----+   +-----+-----+
+ *                                        |LCTRL| LALT|
+ *                                  +-----+-----+-----+
+ *                                  |     |     | HOME|
+ *                                  |BKSPC| DEL +-----+
+ *                                  |     |     | END |
+ *                                  +-----+-----+-----+
+ */
+        KC_EQL,  KC_1,   KC_2,    KC_3,    KC_4,    KC_5, KC_ESC,
+        KC_BSLS, KC_Q,   KC_W,    KC_E,    KC_R,    KC_T, TG(L1),
+        KC_TAB,  KC_A,   KC_S,    KC_D,    KC_F,    KC_G,
+        KC_LSFT, KC_Z,   KC_X,    KC_C,    KC_V,    KC_B, MO(L1),
+        KC_LGUI, KC_GRV, KC_BSLS, KC_LEFT, KC_RGHT,
+                                                      KC_LCTL, KC_LALT,
+                                                               KC_HOME,
+                                             KC_BSPC, KC_DELT, KC_END,
+/* right hand
+ *        +-----+-----+-----+-----+-----+-----+-------+
+ *        |LCK-2|  6  |  7  |  8  |  9  |  0  |   -   |
+ *        +-----+-----+-----+-----+-----+-----+-------+
+ *        |  [  |  Y  |  U  |  I  |  O  |  P  |   ]   |
+ *        |     +-----+-----+-----+-----+-----+-------+
+ *        +-----+  H  |  J  |  K  |  L  |  ;  |   '   |
+ *        | f1  +-----+-----+-----+-----+-----+-------+
+ *        |     |  N  |  M  |  ,  |  .  |  /  | RSHIFT|
+ *        +-----+-----+-----+-----+-----+-----+-----+-+
+ *                    |LEFT |DOWN | UP  |RIGHT| RGUI|
+ *    +-----+-----+   +-----+-----+-----+-----+-----+
+ *    | RALT|RCTRL|
+ *    +-----+-----+-----+
+ *    | PGUP|     |     |
+ *    +-----+ ENT | SPC |
+ *    | PGDN|     |     |
+ *    +-----+-----+-----+
+ */
+             TG(L2),  KC_6,   KC_7,    KC_8,    KC_9,   KC_0,     KC_MINS,
+             KC_LBRC, KC_Y,   KC_U,    KC_I,    KC_O,   KC_P,     KC_RBRC,
+                      KC_H,   KC_J,    KC_K,    KC_L,   KC_SCLN,  KC_QUOT,
+             MO(L1),  KC_N,   KC_M,    KC_COMM, KC_DOT, KC_SLSH,  KC_RSFT,
+                              KC_LEFT, KC_DOWN, KC_UP,  KC_RIGHT, KC_RGUI,
+             KC_RALT, KC_RCTL,
+             KC_PGUP,
+             KC_PGDN, KC_ENT, KC_SPC
+    ),
+
+[L1] = LAYOUT_ergodox( // layer 1 : function layers
+/* left hand
+ *    +-------+-----+-----+-----+-----+-----+-----+
+ *    |       | f1  | f2  | f3  | f4  | f5  | f11 |
+ *    +-------+-----+-----+-----+-----+-----+-----+
+ *    |       |     |     |     |     |     |     |
+ *    +-------+-----+-----+-----+-----+-----+     |
+ *    |       |     |     |     |     |     +-----+
+ *    +-------+-----+-----+-----+-----+-----+     |
+ *    |       |     |     |     |     |     |     |
+ *    +-+-----+-----+-----+-----+-----+-----+-----+
+ *      |     |     |     |     |     |
+ *      +-----+-----+-----+-----+-----+   +-----+-----+
+ *                                        |     |     |
+ *                                  +-----+-----+-----+
+ *                                  |     |     |     |
+ *                                  |     |     +-----+
+ *                                  |     |     |     |
+ *                                  +-----+-----+-----+
+ */
+       KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                                                      KC_TRNS, KC_TRNS,
+                                                               KC_TRNS,
+                                             KC_TRNS, KC_TRNS, KC_TRNS,
+/* right hand
+ *        +-----+-----+-----+-----+-----+-----+-------+
+ *        | f12 | f6  | f7  | f8  | f9  | f10 |       |
+ *        +-----+-----+-----+-----+-----+-----+-------+
+ *        |     |     |     |     |     |     |       |
+ *        |     +-----+-----+-----+-----+-----+-------+
+ *        +-----+     |     |     |     |     |       |
+ *        |     +-----+-----+-----+-----+-----+-------+
+ *        |     |     |     |     |     |     |       |
+ *        +-----+-----+-----+-----+-----+-----+-----+-+
+ *                    |     |     |     |     |     |
+ *    +-----+-----+   +-----+-----+-----+-----+-----+
+ *    |     |     |
+ *    +-----+-----+-----+
+ *    |     |     |     |
+ *    +-----+     |     |
+ *    |     |     |     |
+ *    +-----+-----+-----+
+ */
+       KC_TRNS, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS
+),
+[L2] = LAYOUT_ergodox(
+/* Left hand
+ *    +-------+-----+-----+-----+-----+-----+-----+
+ *    | FLASH |     |     |     |     |     |     |
+ *    +-------+-----+-----+-----+-----+-----+-----+
+ *    |       |     |     |     |     |     |     |
+ *    +-------+-----+-----+-----+-----+-----+     |
+ *    |       |     |     |     |     |     +-----+
+ *    +-------+-----+-----+-----+-----+-----+     |
+ *    |       |     |     |     |     |     |     |
+ *    +-+-----+-----+-----+-----+-----+-----+-----+
+ *      |     |     |     |     |     |
+ *      +-----+-----+-----+-----+-----+   +-----+-----+
+ *                                        |     |     |
+ *                                  +-----+-----+-----+
+ *                                  |     |     |     |
+ *                                  |     |     +-----+
+ *                                  |     |     |     |
+ *                                  +-----+-----+-----+
+ */
+       RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                                           KC_TRNS, KC_TRNS,
+                                                    KC_TRNS,
+                                  KC_TRNS, KC_TRNS, KC_TRNS,
+/* right hand
+ *        +-----+-----+-----+-----+-----+-----+-------+
+ *        |     |     |NMLCK| P/  | P*  | P-  |       |
+ *        +-----+-----+-----+-----+-----+-----+-------+
+ *        |     |     | P7  | P8  | P9  | P+  |       |
+ *        |     +-----+-----+-----+-----+-----+-------+
+ *        +-----+     | P4  | P5  | P6  | P+  |       |
+ *        |     +-----+-----+-----+-----+-----+-------+
+ *        |     |     | P1  | P2  | P3  |PENT |       |
+ *        +-----+-----+-----+-----+-----+-----+-----+-+
+ *                    |     |     | P.  |PENT |     |
+ *    +-----+-----+   +-----+-----+-----+-----+-----+
+ *    |     |     |
+ *    +-----+-----+-----+
+ *    |     |     |     |
+ *    +-----+     | P0  |
+ *    |     |     |     |
+ *    +-----+-----+-----+
+ */
+       KC_TRNS,  KC_TRNS, KC_NUMLOCK, KC_KP_SLASH, KC_KP_ASTERISK, KC_KP_MINUS, KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_KP_7,    KC_KP_8,     KC_KP_9,        KC_KP_PLUS,  KC_TRNS,
+                 KC_TRNS, KC_KP_4,    KC_KP_5,     KC_KP_6,        KC_KP_PLUS,  KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_KP_1,    KC_KP_2,     KC_KP_3,        KC_KP_ENTER, KC_TRNS,
+                          KC_TRNS,    KC_TRNS,     KC_KP_DOT,      KC_KP_ENTER, KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_KP_0
+),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_TAP_TOGGLE(L1)                // FN1 - Momentary Layer 1 (Function)
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+        if (record->event.pressed) {
+          SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+        }
+        break;
+        case 1:
+        if (record->event.pressed) { // For resetting EEPROM
+          eeconfig_init();
+        }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    // dynamically generate these.
+    case EPRM:
+      if (record->event.pressed) {
+        eeconfig_init();
+      }
+      return false;
+      break;
+    case VRSN:
+      if (record->event.pressed) {
+        SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+      }
+      return false;
+      break;
+    case RGB_SLD:
+      if (record->event.pressed) {
+        #ifdef RGBLIGHT_ENABLE
+          rgblight_mode(1);
+        #endif
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+
+};
+
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+
+    uint8_t layer = biton32(layer_state);
+
+    ergodox_board_led_off();
+    ergodox_right_led_1_off();
+    ergodox_right_led_2_off();
+    ergodox_right_led_3_off();
+    switch (layer) {
+      // TODO: Make this relevant to the ErgoDox EZ.
+        case 1:
+            ergodox_right_led_1_on();
+            break;
+        case 2:
+            ergodox_right_led_2_on();
+            break;
+        default:
+            // none
+            break;
+    }
+
+};

keyboards/fc660c/fc660c.h

@@ -20,7 +20,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "quantum.h"
 
 
-#define KEYMAP( \
+#define LAYOUT( \
     K13, K10, K11, K12, K14, K16, K17, K15, K1B, K18, K19, K1A, K1C, K1E,      K1F, \
     K03, K00, K01, K02, K04, K06, K07, K05, K0B, K08, K09, K0A, K0C, K0E,      K0F, \
     K43, K40, K41, K42, K44, K46, K47, K45, K4B, K48, K49, K4A,      K4E,           \

keyboards/fc660c/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "fc660c", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 16.5, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"x":15.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.25}, {"x":14.5, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6}, {"label":"Alt", "x":9.75, "y":4, "w":1.25}, {"label":"Win", "x":11, "y":4, "w":1.25}, {"label":"Menu", "x":12.25, "y":4, "w":1.25}, {"x":13.5, "y":4}, {"x":14.5, "y":4}, {"x":15.5, "y":4}]
+        }
+    }
+}

keyboards/fc660c/keymaps/default/keymap.c

@@ -14,17 +14,17 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-#include "fc660c.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [0] = KEYMAP(
+  [0] = LAYOUT(
         KC_ESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_BSPC,     KC_INS,
         KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSLS,     KC_DEL,
         KC_CAPS,KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,     KC_ENT,
         KC_LSFT,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,     KC_UP,
         KC_LCTL,KC_LGUI,KC_LALT,          KC_SPC,                       KC_RALT,KC_RCTL,MO(1),      KC_LEFT,KC_DOWN,KC_RGHT
     ),
-  [1] = KEYMAP(
+  [1] = LAYOUT(
         KC_GRV, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, _______,     _______,
         _______,_______,_______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK,KC_PAUS,_______,_______,_______,     _______,
         _______,_______,_______,_______,_______,_______,_______,_______,KC_HOME,KC_PGUP,_______,_______,     _______,

keyboards/four_banger/keymaps/default/keymap.c

@@ -6,7 +6,7 @@ enum custom_keycodes {
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     LAYOUT_ortho_2x2(
-        KC_1, KC_U, 
+        KC_1, KC_U,
         KC_P, UP_URL
     ),
 };
@@ -15,10 +15,10 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     switch (keycode) {
         case UP_URL:
             if (record->event.pressed) {
-                SEND_STRING("http://1upkeyboads.com");
+                SEND_STRING("http://1upkeyboards.com");
             }
             return false;
             break;
     }
     return true;
-}
+}

keyboards/frosty_flake/keymaps/nikchi/keymap.c

@@ -27,7 +27,8 @@ enum taps{
   EMOJIS,
   ANIMAL,
   HAND,
-  MEMES
+  MEMES,
+  COPA
 };
 
 enum unicode_name { // split every five emojis
@@ -50,8 +51,8 @@ enum unicode_name { // split every five emojis
   THDN, // 👎
 
   BBB, // dat B 🅱
-  POO, // poop 💩
-  HUNDR, // 100 💯
+  AVO, // avocado 🥑
+  BRED, // unicode consortium pls make toast 🍞
   EGGPL, // EGGPLANT 🍆
   WATER, // wet 💦
 
@@ -71,6 +72,7 @@ enum my_macros {
 qk_tap_dance_action_t tap_dance_actions[] = {
   // Tap once for CTRL, twice for Caps Lock
   [TD_CTCPS]  = ACTION_TAP_DANCE_DOUBLE(KC_LCTL, KC_CAPS),
+  [COPA]  = ACTION_TAP_DANCE_DOUBLE(LCTL(KC_C), LCTL(KC_V)),
   [EMOJIS] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleEmojis, NULL, NULL, 800),
   [ANIMAL] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleAnimals, NULL, NULL, 800),
   [HAND] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleHands, NULL, NULL, 800),
@@ -110,8 +112,8 @@ const uint32_t PROGMEM unicode_map[] = {
   [THINK] = 0x1F914,
   [GRIN] = 0x1F600,
   [BBB] = 0x1F171,
-  [POO] = 0x1F4A9,
-  [HUNDR] = 0x1F4AF,
+  [AVO] = 0x1F951,
+  [BRED] = 0x1F35E,
   [SMRK] = 0x1F60F,
   [WEARY] = 0x1F629,
   [EGGPL] = 0x1F346,
@@ -143,7 +145,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    TD(EMOJIS),TD(ANIMAL),TD(HAND),TD(MEMES),X(WEARY),X(UNAMU),   KC_6,   KC_7,   KC_8,   KC_9,   KC_0, KC_MINS, KC_EQL,KC_BSPC,   KC_MPRV,KC_MPLY,KC_MNXT,  KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
       KC_TAB,   KC_Q,   M(0),   KC_E,   KC_R,X(EGGPL),X(WATER),   KC_U,   KC_I,   KC_O,   KC_P, KC_UP  ,KC_RBRC,KC_BSLS,   KC_MUTE,KC_VOLD,KC_VOLU,    KC_P7,  KC_P8,  KC_P9,KC_PPLS, \
       KC_LCTL,   M(1),   M(3),   M(2),   KC_F,   X(LIT), X(SNEK),   KC_J,   KC_K,   KC_L,KC_LEFT,KC_RGHT,         KC_ENT,                              KC_P4,  KC_P5,  KC_P6,      \
-      KC_LSFT,KC_NUBS,   KC_Z,   KC_X,   KC_C, X(HUNDR), X(BBB),  X(POO),   KC_M,KC_COMM, KC_DOT,KC_DOWN,        KC_RSFT,          KC_MS_U,            KC_P1,  KC_P2,  KC_P3,KC_PENT, \
+      KC_LSFT,KC_NUBS,   KC_Z,   KC_X,   KC_C, TD(COPA), X(BBB),  X(AVO),   KC_M,KC_COMM, KC_DOT,KC_DOWN,        KC_RSFT,          KC_MS_U,            KC_P1,  KC_P2,  KC_P3,KC_PENT, \
       KC_BTN1,KC_BTN3,KC_BTN2,                 KC_SPC,                                KC_RALT,KC_RGUI, TG(2),_______  ,  KC_MS_L,KC_MS_D,KC_MS_R,    KC_P0,KC_PDOT),
 [2] = KEYMAP(\
       KC_ESC,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9, KC_F10, KC_F11, KC_F12,           KC_PSCR,KC_SLCK,KC_PAUS,                        \

keyboards/gh60/keymaps/chaser/README.md

@@ -0,0 +1,96 @@
+# [dragonchasers](https://github.com/dragonchaser) GH60 layout
+
+Layout derived from the default GH60 keymap.
+
+![Photo of the keyboard](https://pbs.twimg.com/media/DQzlD0yX0AA8spX.jpg)
+
+## Layers
+
+### Base Layer
+```
+,-----------------------------------------------------------.
+|Esc~| 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
+|-----------------------------------------------------------|
+|Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |
+|-----------------------------------------------------------|
+|FN     |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |
+|-----------------------------------------------------------|
+|Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|  Up  |FN |
+|-----------------------------------------------------------|
+|Ctrl|Gui |Alt |      Space           |Alt |Left |Down|Right|
+`-----------------------------------------------------------'
+
+Note: right FN triggers function layer,
+      left FN(CAPS) is a one-shot button for the macro layer
+```
+
+### Function Layer
+```
+,-----------------------------------------------------------.
+|GRV|F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|   DEL |
+|-----------------------------------------------------------|
+|  MB3|MB2|MUP|MB1|MWU|   |   |   |INS|   |RST|   |   |Print|
+|-----------------------------------------------------------|
+|      | ML|MDN|MR |MWD|   |   |       |   |   |   |        |
+|-----------------------------------------------------------|
+|CAPS    |   |   |   |   |   |   |   |   |   |   |PGUP|     |
+|-----------------------------------------------------------|
+|    |    |    |                        |Ctrl|HOME|PGD |END |
+`-----------------------------------------------------------'
+```
+
+### Macro Layer
+```
+,-----------------------------------------------------------.
+|DEF|   |DUE|   |   |   |   |   |   |   |   |   |GAM|    ARR|
+|-----------------------------------------------------------|
+|     |MAG|CLO|DUT|RBS|TIG|   |   |   |COU|PSH|   |   |     |
+|-----------------------------------------------------------|
+|      |ADD|STS|DFF|FTC|PLL|   |       |LOG|   |   |        |
+|-----------------------------------------------------------|
+|         |   |   |COM|   |BRN|   |   |   |   |MUT|VOL+|PLPA|
+|-----------------------------------------------------------|
+|    |    |    |                        |APP |PREV|VOL-|NEXT|
+`-----------------------------------------------------------'
+
+Abbreviations:
+--------------
+DEF  - return to default layer
+DUE  - enable git duet mode
+GAM  - backlight WASD
+ARR  - backlight arrows
+-
+MAG  - git submodule sync --recursive \
+       && git submodule update --init --recursive \
+       && git submodule foreach --recursive "git co . \
+       && git reset --hard && git clean -dffx"
+CLO  - git clone
+DUT  - git duet (when in duet mode)
+RBS  - git rebase
+TIG  - tig
+COU  - git checkout
+PSH  - git push
+-
+ADD  - git add
+STS  - git status
+DFF  - git diff
+FTC  - git fetch
+PLL  - git pull
+LOG  - git log
+-
+COM  - git commit (or git duet commit if in duet mode)
+BRN  - git branch
+MUT  - audio mute
+VOL+ - increase volume
+PLPA - play/pause
+-
+APP  - application (windows menu key)
+PREV - previous song
+VOL- - decrease volume
+NEXT - next song
+
+Note: git commands are SEND_STRING macros sent to the
+      currently focused window Make sure it is your terminal :)
+ ```
+
+**NOTE:** an outdated version of this keymap is also present for the Satan keyboard, which is no longer maintained since I could not get my hands on a properly working PCB.

keyboards/gh60/keymaps/chaser/keymap.c

@@ -0,0 +1,331 @@
+#include QMK_KEYBOARD_H
+#include "action_layer.h"
+#include "eeconfig.h"
+#include <util/delay.h>
+
+
+extern keymap_config_t keymap_config;
+
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QW 0
+#define _FL 1
+#define _MC 2
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+bool git_duet = false;
+bool backlight_arrows = false;
+bool backlight_gaming = false;
+enum custom_keycodes {
+  /* GIT related keycodes */
+  G_ADD = SAFE_RANGE, G_BRN, G_COM, G_COU, G_CLO,
+  G_DFF, G_DUE, G_DUT, G_FTC, G_LOG, G_MAG, G_MRG,
+  G_MRT, G_PSH, G_PLL, G_RBS, G_STH, G_STS, G_TIG,
+
+  /* Multi-media related keycodes */
+  A_MUTE, A_NEXT, A_PLPA, A_PREV, A_VOUP, A_VDWN,
+
+  /* System related shortcuts */
+  F_BTN, M_WAPP, K_ARR, K_WASD,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/*
+ * ,-----------------------------------------------------------.
+ * |Esc~| 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
+ * |-----------------------------------------------------------|
+ * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |
+ * |-----------------------------------------------------------|
+ * |FN     |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |
+ * |-----------------------------------------------------------|
+ * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|  Up  |FN |
+ * |-----------------------------------------------------------|
+ * |Ctrl|Gui |Alt |      Space           |Alt |Left |Down|Right|
+ * `-----------------------------------------------------------'
+ *
+ * Note: right FN triggers function layer,
+ *       left FN is a one-shot button for the macro layer
+ */
+[_QW] = { /* Layer 0: Qwerty */
+    {KC_ESC  , KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC},
+    {KC_TAB  , KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS},
+    {OSL(_MC), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT },
+    {KC_LSFT , XXXXXXX, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, F_BTN, KC_UP},
+    {KC_LCTL , KC_LGUI, KC_LALT, XXXXXXX, XXXXXXX, KC_SPC,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT}
+},\
+
+/*
+ * ,-----------------------------------------------------------.
+ * |GRV|F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|   DEL |
+ * |-----------------------------------------------------------|
+ * |  MB3|MB2|MUP|MB1|MWU|   |   |   |INS|   |RST|   |   |Print|
+ * |-----------------------------------------------------------|
+ * |      | ML|MDN|MR |MWD|   |   |       |   |   |   |        |
+ * |-----------------------------------------------------------|
+ * |CAPS    |   |   |   |   |   |   |   |   |   |   |PGUP|     |
+ * |-----------------------------------------------------------|
+ * |    |    |    |                        |Ctrl|HOME|PGD |END |
+ * `-----------------------------------------------------------'
+ */
+[_FL] = { /* Layer 1: Functions */
+    {KC_GRV     , KC_F1      ,KC_F2      ,KC_F3      , KC_F4        , KC_F5  , KC_F6  , KC_F7  , KC_F8  , KC_F9  , KC_F10  , KC_F11,  KC_F12   , KC_DEL },
+    {KC_MS_BTN3 , KC_MS_BTN2 ,KC_MS_UP   ,KC_MS_BTN1 , KC_MS_WH_UP  , _______, _______, _______, KC_INS , _______, RESET   , _______, _______  , KC_PSCREEN},
+    {KC_CAPS    , KC_MS_LEFT ,KC_MS_DOWN ,KC_MS_RIGHT, KC_MS_WH_DOWN, _______, _______, _______, _______, _______, _______ , XXXXXXX, KC_TILDE},
+    {_______    , XXXXXXX    , _______   , _______   , _______      , _______, _______, _______, _______, _______, _______ , _______, _______  , KC_PGUP},
+    {_______    , _______    , _______   , XXXXXXX   , XXXXXXX      , _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_RCTRL, KC_HOME, KC_PGDOWN, KC_END}
+},
+
+/*
+ * ,-----------------------------------------------------------.
+ * |DEF|   |DUE|   |   |   |   |   |   |   |   |   |GAM|    ARR|
+ * |-----------------------------------------------------------|
+ * |     |MAG|CLO|DUT|RBS|TIG|MRT|   |   |COU|PSH|   |   |     |
+ * |-----------------------------------------------------------|
+ * |      |ADD|STS|DFF|FTC|PLL|MRG|   |STH|LOG|   |   |   F_OFF|
+ * |-----------------------------------------------------------|
+ * |         |   |   |COM|   |BRN|   |   |   |   |MUT|VOL+|PLPA|
+ * |-----------------------------------------------------------|
+ * |    |    |    |                        |APP |PREV|VOL-|NEXT|
+ * `-----------------------------------------------------------'
+ *
+ * Abbreviations:
+ * --------------
+ * DEF  - return to default layer
+ * DUE  - enable git duet mode
+ * CLO  - git clone
+ * DUT  - git duet (when in duet mode)
+ * RBS  - git rebase
+ * MAG  - git submodule sync --recursive && git submodule update --init --recursive && git submodule foreach --recursive "git co . && git reset --hard && git clean -dffx"
+ * TIG  - tig
+ * MRG  - git merge
+ * MRT  - git mergetool
+ * COU  - git checkout
+ * PSH  - git push
+ * ADD  - git add
+ * STS  - git status
+ * DFF  - git diff
+ * FTC  - git fetch
+ * PLL  - git pull
+ * STH  - git stash
+ * LOG  - git log
+ * COM  - git commit (or git duet commit if in duet mode)
+ * BRN  - git branch
+ * APP  - application (windows menu key)
+ * MUT  - audio mute
+ * VOL+ - increase volume
+ * VOL- - decrease volume
+ * PLPA - play/pause
+ * PREV - previous song
+ * NEXT - next song
+ * ARR  - backlight arrow keys
+ * GAM  - backlight WASD
+ *
+ * Note: git commands are SEND_STRING macros sent to the
+ *       currently focused window Make sure it is your terminal :)
+ */
+[_MC] = { /* Layer 2: Macros (Git & Multimedia) */
+    {TO(_QW), XXXXXXX,G_DUE  , XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX , XXXXXXX, K_WASD , K_ARR },
+    {XXXXXXX, G_MAG  ,G_CLO  , G_DUT  , G_RBS  , G_TIG  , G_MRT  , XXXXXXX, XXXXXXX, G_COU  , G_PSH   , XXXXXXX, XXXXXXX, XXXXXXX},
+    {XXXXXXX, G_ADD  ,G_STS  , G_DFF  , G_FTC  , G_PLL  , G_MRG  , XXXXXXX, G_STH  , G_LOG  , XXXXXXX , XXXXXXX, XXXXXXX, XXXXXXX},
+    {XXXXXXX, XXXXXXX,XXXXXXX, XXXXXXX, G_COM  , XXXXXXX, G_BRN  , XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX , A_MUTE, A_PLPA, A_VOUP},
+    {XXXXXXX, XXXXXXX,XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, M_WAPP  , A_PREV, A_VDWN, A_NEXT}
+},
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  if (record->event.pressed) {
+    switch(keycode) {
+      /*
+       * Begin git layer
+       */
+      case G_ADD:
+        SEND_STRING("git add ");
+        layer_off(_MC);
+        return false;break;
+      case G_BRN:
+        SEND_STRING("git branch\n");
+        layer_off(_MC);
+        return false;break;
+      case G_CLO:
+        SEND_STRING("git clone ");
+        layer_off(_MC);
+        return false;break;
+      case G_COM:
+        if(git_duet) {
+          SEND_STRING("git duet-commit ");
+        } else {
+          SEND_STRING("git commit ");
+        }
+        layer_off(_MC);
+        return false;break;
+      case G_COU:
+        SEND_STRING("git checkout ");
+        layer_off(_MC);
+        return false;break;
+      case G_DFF:
+        SEND_STRING("git diff\n");
+        layer_off(_MC);
+        return false;break;
+      case G_DUE:
+        git_duet = !git_duet;
+        if(git_duet) {
+          gh60_esc_led_on();
+        } else {
+          gh60_esc_led_off();
+        }
+        layer_off(_MC);
+        return false;break;
+      case G_DUT:
+        if(git_duet) {
+          SEND_STRING("git duet ");
+        }
+        layer_off(_MC);
+        return false; break;
+      case G_FTC:
+        SEND_STRING("git fetch ");
+        layer_off(_MC);
+        return false;break;
+      case G_LOG:
+        SEND_STRING("git log --graph\n");
+        layer_off(_MC);
+        return false;break;
+      case G_MAG:
+        // This is some git-magic to resync recursive submodule structures inside git projects (thx to https://github.com/jimmykarily)
+        SEND_STRING("git submodule sync --recursive && git submodule update --init --recursive && git submodule foreach --recursive \" git co . && git reset --hard && git clean -dffx \" \n");
+        layer_off(_MC);
+        return false; break;
+      case G_MRG:
+        SEND_STRING("git merge ");
+        layer_off(_MC);
+        return false;break;
+      case G_MRT:
+        SEND_STRING("git mergetool ");
+        layer_off(_MC);
+        return false;break;
+      case G_PLL:
+        SEND_STRING("git pull ");
+        layer_off(_MC);
+        return false;break;
+      case G_PSH:
+        SEND_STRING("git push ");
+        layer_off(_MC);
+        return false;break;
+      case G_RBS:
+        SEND_STRING("git rebase ");
+        layer_off(_MC);
+        return false;break;
+      case G_STH:
+        SEND_STRING("git stash ");
+        layer_off(_MC);
+        return false;break;
+      case G_STS:
+        SEND_STRING("git status\n");
+        layer_off(_MC);
+        return false;break;
+      case G_TIG:
+        SEND_STRING("tig\n");
+        layer_off(_MC);
+        return false;break;
+      /*
+       * End git layer
+       */
+
+      /*
+       * Begin multimedia keys
+       */
+      case A_MUTE:
+        register_code(KC_AUDIO_MUTE);
+        unregister_code(KC_AUDIO_MUTE);
+        layer_off(_MC);
+        return false;break;
+      case A_PLPA:
+        register_code(KC_MEDIA_PLAY_PAUSE);
+        unregister_code(KC_MEDIA_PLAY_PAUSE);
+        layer_off(_MC);
+        return false;break;
+      case A_VOUP:
+        register_code(KC_AUDIO_VOL_UP);
+        return false;break;
+      case A_VDWN:
+        register_code(KC_AUDIO_VOL_DOWN);
+        return false;break;
+      case A_PREV:
+        register_code(KC_MEDIA_PREV_TRACK);
+        unregister_code(KC_MEDIA_PREV_TRACK);
+        layer_off(_MC);
+        return false;break;
+      case A_NEXT:
+        register_code(KC_MEDIA_NEXT_TRACK);
+        unregister_code(KC_MEDIA_NEXT_TRACK);
+        layer_off(_MC);
+        return false;break;
+      /*
+       * End multimedia keys
+       */
+
+      // Tap dance to get the app button mapped
+      case M_WAPP:
+        register_code(KC_APP);
+        unregister_code(KC_APP);
+        layer_off(_MC);
+        return false;break;
+
+      /*
+       * Begin multimedia keys
+       */
+      case K_ARR:
+        backlight_arrows = !backlight_arrows;
+        if(backlight_arrows) {
+          gh60_poker_leds_on();
+        } else {
+          gh60_poker_leds_off();
+        }
+        layer_off(_MC);
+        return false;break;
+      case K_WASD:
+        backlight_gaming = !backlight_gaming;
+        if(backlight_gaming) {
+          gh60_wasd_leds_on();
+        } else {
+          gh60_wasd_leds_off();
+        }
+        layer_off(_MC);
+        return false; break;
+      case F_BTN:
+        gh60_fn_led_on();
+        layer_on(_FL);
+        return false;break;
+    }
+    /*
+     * End multimedia keys
+     */
+
+  } else {
+    switch(keycode) {
+      /*
+       * Oneshots that will switch back to the default layer on KEY_UP
+       */
+      case A_VOUP:
+        unregister_code(KC_AUDIO_VOL_UP);
+        layer_off(_MC);
+        return false;break;
+      case A_VDWN:
+        unregister_code(KC_AUDIO_VOL_DOWN);
+        layer_off(_MC);
+        return false;break;
+      case F_BTN:
+        layer_off(_FL);
+        gh60_fn_led_off();
+        return false;break;
+    }
+  }
+  return true;
+};

keyboards/gh60/keymaps/maartenwut/keymap.c

@@ -0,0 +1,47 @@
+#include "gh60.h"
+#include "action_layer.h"
+
+#define _MA 0
+#define _GA 1
+#define _FL 2
+#define _AR 3
+
+#define TRNS KC_TRNS
+#define trigger_time 400
+
+#define LSHIFT OSM(MOD_LSFT)
+#define SPACE LT(_AR, KC_SPC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+// Main Layer
+[_MA] = KEYMAP_HHKB(
+	KC_GESC,	KC_1, 		KC_2, 		KC_3, 		KC_4, 		KC_5, 		KC_6, 		KC_7, 		KC_8, 		KC_9, 		KC_0, 		KC_MINS,	KC_EQL,		KC_BSPC,	KC_NO,
+	KC_TAB,		KC_Q, 		KC_W, 		KC_E, 		KC_R, 		KC_T, 		KC_Y, 		KC_U, 		KC_I,  		KC_O,  		KC_P, 		KC_LBRC,	KC_RBRC,	KC_BSLS,
+	KC_CAPS,	KC_A, 		KC_S,   	KC_D, 		KC_F, 		KC_G, 		KC_H, 		KC_J, 		KC_K,  		KC_L,  		KC_SCLN, 	KC_QUOT,  				KC_ENT,
+	LSHIFT, 				KC_Z, 		KC_X,   	KC_C, 		KC_V, 		KC_B, 		KC_N, 		KC_M, 		KC_COMM, 	KC_DOT,		KC_SLSH,	KC_RSFT, 	KC_DEL,
+	KC_LCTL, 	KC_LGUI, 	KC_LALT,										SPACE,											KC_NO,		KC_RALT, 	MO(_FL), 	KC_RCTRL),
+
+//Function Layer
+[_FL] = KEYMAP_HHKB(
+	KC_GRV,		KC_F1,		KC_F2,  	KC_F3,  	KC_F4,  	KC_F5,		KC_F6,		KC_F7, 		KC_F8,		KC_F9,		KC_F10,  	KC_F11,		KC_F12,		RESET,		KC_NO,
+	TRNS, 		TRNS,		TRNS,  		TRNS, 		TRNS, 		TRNS, 		TRNS,		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS,		TRNS,		KC_PSCR,
+	TRNS, 		KC_MS_L,	KC_MS_D, 	KC_MS_R,	TRNS,		TG(_GA),	TRNS,		TRNS,		TRNS,		TRNS,		TRNS,		TRNS,					TRNS,
+	TRNS, 					TRNS,		TRNS,		TRNS,	 	TRNS, 		TRNS, 		TRNS,		TRNS,		KC_VOLD,	KC_VOLU,	KC_MUTE,	TRNS,		KC_MPLY,
+	TRNS, 		TRNS, 		TRNS,											TRNS,											TRNS,		TRNS,		TRNS,		TRNS),
+
+//Arrow keys layer (space bar)
+[_AR] = KEYMAP_HHKB(
+	KC_GRV,		KC_F1,		KC_F2,  	KC_F3,  	KC_F4,  	KC_F5,		KC_F6,		KC_F7, 		KC_F8,		KC_F9,		KC_F10,  	KC_F11,		KC_F12,		TRNS,		KC_NO,
+	TRNS,		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		KC_PGUP, 	KC_UP,  	KC_PGDN,  	TRNS, 		TRNS,		TRNS,		TRNS,
+	TRNS,		TRNS, 		TRNS,   	TRNS, 		TRNS, 		TRNS, 		TRNS, 		KC_LEFT, 	KC_DOWN,  	KC_RGHT,  	TRNS, 		TRNS, 	 				TRNS,
+	TRNS,					TRNS,		TRNS,		TRNS,		TRNS,	 	TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS,		TRNS, 		TRNS,   	TRNS,
+	TRNS, 		TRNS, 		TRNS,											TRNS,											TRNS,		TRNS, 		TRNS,		TRNS),
+//Game layer (fn + g)
+[_GA] = KEYMAP_HHKB(
+	TRNS,		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS,		TRNS,		TRNS,		KC_NO,
+	TRNS,		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS,  		TRNS,  		TRNS, 		TRNS,		TRNS,		TRNS,
+	TRNS,		TRNS, 		TRNS,   	TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS,  		TRNS,  		TRNS, 		TRNS,  					TRNS,
+	KC_LSFT, 				TRNS, 		TRNS,   	TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS,		TRNS, 		TRNS,		TRNS,
+	TRNS, 		TRNS, 		TRNS,											KC_SPC,											TRNS,		TRNS, 		MO(_FL),	TRNS),
+
+};

keyboards/handwired/dactyl/config.h

@@ -30,12 +30,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PRODUCT         Dactyl
 #define DESCRIPTION     An ortholinear, split, 3D-curved keyboard with thumb clusters.
 
-/* key matrix size
- * At this time, "row" in the dactyl's code actually means "column" on the
- * physical keyboard. It's confusing. I'm sorry. Blame Jack Humbert :P
- */
-#define MATRIX_ROWS 12
-#define MATRIX_COLS 6
+#define DIODE_DIRECTION ROW2COL
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 12
+#define COL_EXPANDED { true, true, true, true, true, true, false, false, false, false, false, false}
+#define MATRIX_ONBOARD_ROW_PINS { F0, F1, F4, F5, F6, F7 }
+#define MATRIX_ONBOARD_COL_PINS { 0, 0, 0, 0, 0, 0, B1, B2, B3, D2, D3, C6 }
+#define EXPANDER_COL_REGISTER 0
+#define MATRIX_EXPANDER_COL_PINS {0, 1, 2, 3, 4, 5}
+#define MATRIX_EXPANDER_ROW_PINS {0, 1, 2, 3, 4, 5}
 
 #define MOUSEKEY_INTERVAL     20
 #define MOUSEKEY_DELAY        0

keyboards/handwired/dactyl/dactyl.c

@@ -1,80 +1,15 @@
 #include "dactyl.h"
 #include "i2cmaster.h"
 
-
-bool i2c_initialized = 0;
-uint8_t mcp23018_status = 0x20;
-
-void matrix_init_kb(void) {
-    DDRB  &= ~(1<<4);  // set B(4) as input
-    PORTB &= ~(1<<4);  // set B(4) internal pull-up disabled
-
-    // unused pins - C7, D4, D5, D7, E6
-    // set as input with internal pull-up enabled
-    DDRC  &= ~(1<<7);
-    DDRD  &= ~(1<<5 | 1<<4);
-    DDRE  &= ~(1<<6);
-    PORTC |=  (1<<7);
-    PORTD |=  (1<<5 | 1<<4);
-    PORTE |=  (1<<6);
-
-    matrix_init_user();
-}
-
-uint8_t init_mcp23018(void) {
-    mcp23018_status = 0x20;
-
-    // I2C subsystem
-
-    if (i2c_initialized == 0) {
-        i2c_init();  // on pins D(1,0)
-        i2c_initialized = true;
-        _delay_ms(1000);
-    }
-
-    // set pin direction
-    // - unused  : input  : 1
-    // - input   : input  : 1
-    // - driving : output : 0
-    mcp23018_status = i2c_start(I2C_ADDR_WRITE);    if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(IODIRA);            if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(0b00000000);        if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(0b00111111);        if (mcp23018_status) goto out;
-    i2c_stop();
-
-    // set pull-up
-    // - unused  : on  : 1
-    // - input   : on  : 1
-    // - driving : off : 0
-    mcp23018_status = i2c_start(I2C_ADDR_WRITE);    if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(GPPUA);             if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(0b00000000);        if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(0b00111111);        if (mcp23018_status) goto out;
-
-out:
-    i2c_stop();
-
-    return mcp23018_status;
-}
-
 #ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 // swap-hands action needs a matrix to define the swap
 const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
-    /* Left hand, matrix positions */
-    {{0,11}, {1,11}, {2,11}, {3,11}, {4,11}, {5,11}},
-    {{0,10}, {1,10}, {2,10}, {3,10}, {4,10}, {5,10}},
-    {{0,9},  {1,9},  {2,9},  {3,9},  {4,9},  {5,9}},
-    {{0,8},  {1,8},  {2,8},  {3,8},  {4,8},  {5,8}},
-    {{0,7},  {1,7},  {2,7},  {3,7},  {4,7},  {5,7}},
-    {{0,6},  {1,6},  {2,6},  {3,6},  {4,6},  {5,6}},
-
-    /* Right hand, matrix positions */
-    {{0,5},  {1,5},  {2,5},  {3,5},  {4,5},  {5,5}},
-    {{0,4},  {1,4},  {2,4},  {3,4},  {4,4},  {5,4}},
-    {{0,3},  {1,3},  {2,3},  {3,3},  {4,3},  {5,3}},
-    {{0,2},  {1,2},  {2,2},  {3,2},  {4,2},  {5,2}},
-    {{0,1},  {1,1},  {2,1},  {3,1},  {4,1},  {5,1}},
-    {{0,0},  {1,0},  {2,0},  {3,0},  {4,0},  {5,0}},
+    {{0,11}, {0,10}, {0,9},  {0,8},  {0,7},  {0,6},     {0,5},  {0,4},  {0,3},  {0,2},  {0,1},  {0,0}},
+    {{1,11}, {1,11}, {1,9},  {1,8},  {1,7},  {1,6},     {1,5},  {1,4},  {1,3},  {1,2},  {1,1},  {1,0}},
+    {{2,11}, {2,12}, {2,9},  {2,8},  {2,7},  {2,6},     {2,5},  {2,4},  {2,3},  {2,2},  {2,1},  {2,0}},
+    {{3,11}, {3,13}, {3,9},  {3,8},  {3,7},  {3,6},     {3,5},  {3,4},  {3,3},  {3,2},  {3,1},  {3,0}},
+    {{4,11}, {4,14}, {4,9},  {4,8},  {4,7},  {4,6},     {4,5},  {4,4},  {4,3},  {4,2},  {4,1},  {4,0}},
+    {{5,11}, {5,15}, {5,9},  {5,8},  {5,7},  {5,6},     {5,5},  {5,4},  {5,3},  {5,2},  {5,1},  {5,0}},
 };
 #endif

keyboards/handwired/dactyl/dactyl.h

@@ -10,7 +10,6 @@
 #define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
 #define CPU_16MHz       0x00
 
-// I2C aliases and register addresses (see "mcp23018.md")
 #define I2C_ADDR        0b0100000
 #define I2C_ADDR_WRITE  ( (I2C_ADDR<<1) | I2C_WRITE )
 #define I2C_ADDR_READ   ( (I2C_ADDR<<1) | I2C_READ  )
@@ -23,52 +22,46 @@
 #define OLATA           0x14            // output latch register
 #define OLATB           0x15
 
-extern uint8_t mcp23018_status;
+extern uint8_t expander_status;
+extern uint8_t expander_input_pin_mask;
+extern bool i2c_initialized;
 
 void init_dactyl(void);
-uint8_t init_mcp23018(void);
+void init_expander(void);
 
-#define KEYMAP(                                                 \
-                                                                \
-    /* left hand, spatial positions */                          \
-    k00,k01,k02,k03,k04,k05,                                    \
-    k10,k11,k12,k13,k14,k15,                                    \
-    k20,k21,k22,k23,k24,k25,                                    \
-    k30,k31,k32,k33,k34,k35,                                    \
-    k40,k41,k42,k43,k44,                                        \
-                            k55,k50,                            \
-                                k54,                            \
-                        k53,k52,k51,                            \
-                                                                \
-    /* right hand, spatial positions */                         \
-            k06,k07,k08,k09,k0A,k0B,                            \
-            k16,k17,k18,k19,k1A,k1B,                            \
-            k26,k27,k28,k29,k2A,k2B,                            \
-            k36,k37,k38,k39,k3A,k3B,                            \
-                k47,k48,k49,k4A,k4B,                            \
-    k5B,k56,                                                    \
-    k57,                                                        \
-    k5A,k59,k58 )                                               \
-                                                                \
-   /* matrix positions */                                       \
-   {                                                            \
-    { k00, k10, k20,   k30, k40,   k50   }, \
-    { k01, k11, k21,   k31, k41,   k51   }, \
-    { k02, k12, k22,   k32, k42,   k52   }, \
-    { k03, k13, k23,   k33, k43,   k53   }, \
-    { k04, k14, k24,   k34, k44,   k54   }, \
-    { k05, k15, k25,   k35, KC_NO, k55   }, \
-                                            \
-    { k06, k16, k26,   k36, KC_NO, k56   }, \
-    { k07, k17, k27,   k37, k47,   k57   }, \
-    { k08, k18, k28,   k38, k48,   k58   }, \
-    { k09, k19, k29,   k39, k49,   k59   }, \
-    { k0A, k1A, k2A,   k3A, k4A,   k5A   }, \
-    { k0B, k1B, k2B,   k3B, k4B,   k5B   }  \
+#define KEYMAP(                                                         \
+                                                                        \
+    /* left hand, spatial positions */                                  \
+    k00,k01,k02,k03,k04,k05,                                            \
+    k10,k11,k12,k13,k14,k15,                                            \
+    k20,k21,k22,k23,k24,k25,                                            \
+    k30,k31,k32,k33,k34,k35,                                            \
+    k40,k41,k42,k43,k44,                                                \
+                            k55,k50,                                    \
+                                k54,                                    \
+                        k53,k52,k51,                                    \
+                                                                        \
+    /* right hand, spatial positions */                                 \
+            k06,k07,k08,k09,k0A,k0B,                                    \
+            k16,k17,k18,k19,k1A,k1B,                                    \
+            k26,k27,k28,k29,k2A,k2B,                                    \
+            k36,k37,k38,k39,k3A,k3B,                                    \
+                k47,k48,k49,k4A,k4B,                                    \
+    k5B,k56,                                                            \
+    k57,                                                                \
+    k5A,k59,k58 )                                                       \
+                                                                        \
+   /* matrix positions */                                               \
+   {                                                                    \
+    { k00, k01, k02, k03, k04, k05,     k06, k07, k08, k09, k0A, k0B }, \
+    { k10, k11, k12, k13, k14, k15,     k16, k17, k18, k19, k1A, k1B }, \
+    { k20, k21, k22, k23, k24, k25,     k26, k27, k28, k29, k2A, k2B }, \
+    { k30, k31, k32, k33, k34, k35,     k36, k37, k38, k39, k3A, k3B }, \
+    { k40, k41, k42, k43, k44, KC_NO, KC_NO, k47, k48, k49, k4A, k4B }, \
+    { k50, k51, k52, k53, k54, k55,     k56, k57, k58, k59, k5A, k5B }, \
    }
 
 
-
 #define LAYOUT_dactyl KEYMAP
 
 #endif