@ -2,128 +2,144 @@ Alternative Controller for HHKB Pro
===================================
===================================
I wanted to add some features like vi cursor and mouse keys to my [HHKB][HHKB] but its controller is not programmable and
I wanted to add some features like vi cursor and mouse keys to my [HHKB][HHKB] but its controller is not programmable and
firmware source code is not open, of course. This means customizing this keyboard needs to replace original
firmware source code is not open, of course. This means customizing this keyboard needs to replace original
controller with programmable one. For this purpose I used PJRC [Teensy++][Teensy] as alternative controller.
controller with programmable one. This controller can work with HHKB Professional and Professional 2 model.
See [this thread][AltController] in geekhack.org.
[HHKB]: http://www.pfu.fujitsu.com/hhkeyboard/
[HHKB]: http://www.pfu.fujitsu.com/hhkeyboard/
[AltController]: http://geekhack.org/index.php?topic=12047.0
[Teensy]: http://www.pjrc.com/teensy/
[Teensy]: http://www.pjrc.com/teensy/
My keyboard firmware source tree is here: http://github.com/tmk/tmk_keyboard
See directory keyboard/hhkb to build firmware for HHKB.
##Features
##Features
* Customizable keymap
* Customizable keymap
* More keymap layers(more Fn keys)
* More keymap layers(more Fn keys)
* Mouse keys
* Mouse keys
* USB NKRO
* USB NKRO
See README of [tmk_keyboard] for more.
[tmk_keyboard]: http://github.com/tmk/tmk_keyboard
###Pros
###Pros
* No risk: Everything is all reversible
* Without PCB trace cutting, case mod or any destructives
* Without PCB trace cutting, case mod or any destructives
* Can keep original controller intact
* Can keep original controller intact
* Can change all HHKB behaviour as you like
* Can change all HHKB behaviour as you like
###Cons
###Cons
* Void your warranty
* Void your warranty
* Lose USB hub function in case of Pro2
* Lose USB hub function of Pro2
##DISCLAIMER
##DISCLAIMER
I'm not a professional of electronics or MCU programming. This may damage your HHKB.
I'm not a professional of electronics n or MCU programming. This may damage your HHKB.
And my English writing is poor, I'm not sure I can convey my notions accurately.
And my English writing is poor, I'm not sure I can convey my notions accurately.
##Documents
See [doc/HHKB.txt ](doc/HHKB.txt ) and files under [doc/ ](doc/ ) for internal of HHKB and this controller.
##Build Firmware & Program
You can choose some combination of hardware and USB protocol stack([LUFA], [PJRC]).
### Install Tools
See [this document ](../../doc/build.md ).
##Build Firmware
### TMK Alt Controller Board
You can choose some combination of MCU and USB protocol stack.
$ make -f Makefile.tmk
### Teensy++(AVR USB family) with [LUFA]
0. Edit **matrix.c** to use your pin configuration. See doc/HHKB.txt for detail.
1. Edit **keymap.c** to use your favoirte keymap.
2. Edit **Makefile** if you want to use other `MCU` than Teensy++ 2.0.
3. Build firmware binary file:
This programs the controller with [dfu-programmer] if the tool is intalled and configured properly.
`$ make -f Makefile.lufa`
4. Program MCU with PJRC [Teensy Loader] tool. If you install command line version of the loader just run:
$ make -f Makefile.tmk dfu
`$ make -f Makefile.lufa teensy`
[LUFA]: http://www.fourwalledcubicle.com/LUFA.php
Push reset button and program with [FLIP]. The tool should be intalled and configured properly.
[Teensy Loader]: http://www.pjrc.com/teensy/loader.html
$ make -f Makefile.tmk flip
###AVR Mega with [V-USB]
Or you can also program with FLIP GUI.
Follow below if you want to use AVR with V-USB as .
0. Edit **matrix.c** to use your pin configuration. See doc/HHKB.txt for detail.
[dfu-programmer]: http://dfu-programmer.sourceforge.net/
[FLIP]: http://www.atmel.com/tools/FLIP.aspx
1. Edit **keymap.c** to use your favoirte keymap.
2. Edit **usbconfig.h** to configure V-USB options.
### PJRC Teensy++
Build with [LUFA] USB stack:
3. Edit **Makefile.vusb** to define `MCU` and `F_CPU` . $ make -f Makefile.lufa
4. Build firmware binary file:
or with [PJRC] USB stack:
`$ make -f Makefile.vusb`
5. Program MCU with AVR programmer like AVRISPmkII. If you already have [USBaspLoader] on MCU just run:
$ make -f Makefile.pjrc
`$ make -f Makefile.vusb program`
[V-USB]: http://www.obdev.at/products/vusb/index.html
Push reset button and program with [Teensy Loader(command line)]. The tool should be intalled and configured properly.
[USBaspLoader]: http://www.obdev.at/products/vusb/usbasploader.html
$ make -f Makefile.lufa teensy
$ make -f Makefile.pjrc teensy
###How to Customize Keymap
Or you can also program with [Teensy Loader(GUI)].
Later...
See **keymap.c** .
[LUFA]: http://www.fourwalledcubicle.com/LUFA.php
[PJRC]: http://www.pjrc.com/teensy/usb_keyboard.html
[Teensy Loader(command line)]: http://www.pjrc.com/teensy/loader_cli.html
[Teensy Loader(GUI)]: http://www.pjrc.com/teensy/loader.html
##Hardware
###Teensy++ installation
###AVR Mega with [V-USB]
Angled USB mini B adapter is used to install Teensy++ laterally.
Build:
$ make -f Makefile.vusb
 Program [USBaspLoader] on MCU with AVR programmer like [AVRISPmkII] and tool like [avrdude].
Bread baord wires are used to connect Teensy++.
You can programs with [avrdude] once you have programmed [USBaspLoader] on MCU.
$ make -f Makefile.vusb program
[AVRISPmkII]: http://www.atmel.com/tools/AVRISPMKII.aspx
[avrdude]: http://www.nongnu.org/avrdude/
##How to Customize
See [tmk_keyboard] documents.
###PJRC Teensy++ 2.0 connection
+---------------+
| Teensy++ |
| |
| | HHKB
| | ~~~~
| PB0-2|------->ROW(6-8)
| PB3-5|------->COL(9-11)
| PB6|------->ENABLE(12)
| PE6|< -------KEY ( 4 )
| PE7|------->PREV(5)
| |
| |
| |
+---------------+
##Hardware
You have some options for hardware. Development boards with USB AVR family(ATMega32U4, AT90USB1286) like Teensy will work while MegaAVR with V-USB library is also cheapear option for DIY.
###1. TMK Alt Controller Board
TMK designed [Keyboard Controller Board for HHKB Pro2(KiCad project) ](https://github.com/tmk/HHKB_controller ).
See [this post ](http://geekhack.org/index.php?topic=12047.msg948923#msg948923 ).
###2. PJRC Teensy++ 2.0 connection
+---------------+
| Teensy++ |
| |
| | HHKB pro HHKB pro2
| | ~~~~~~~~ ~~~~~~~~~
| PB0-2|------->ROW (6-8) (5-7)
| PB3-5|------->COL (9-11) (8-10)
| PB6|------->ENABLE (12) (11)
| PE6|< -------KEY ( 4 ) ( 3 )
| PE7|------->PREV (5) (4)
| |
| | 5V--- (1-3) (1-2)
| | GND--- (13-14) (12-13)
+---------------+
- NOTE: PJRC [Teensy ](http://www.pjrc.com/teensy/ )
[Teensy Loader]: http://www.pjrc.com/teensy/loader.html
###V-USB circuit
###3. V-USB connection
+---+ +---------------+
+---+ +---------------+
USB GND | | ATmega168 |
USB GND | | ATmega328p |
~~~ C3 | |
~~~ C3 | |
5V < ------- + -------- + --- | Vcc , AVCC | HHKB
5V < ------- + -------- + --- | Vcc , AVCC | HHKB pro pro2
R1 | | ~~~~
R1 | | ~~~~~~~~ ~~~~
D- < ---- + -- + -----R2----- | INT1 PB2-4 | ------- > ROW(6-8)
D- < ---- + -- + -----R2----- | INT1 PB2-4 | ------- > ROW (6-8) (5-7)
D+ < ---- | --- + ----R3----- | INT0 PC0-2 | ------- > COL(9-11)
D+ < ---- | --- + ----R3----- | INT0 PC0-2 | ------- > COL (9-11) (8-10)
Z1 Z2 | PC3|------->ENABLE(12)
Z1 Z2 | PC3|------->ENABLE (12) (11)
GND< ---- + --- + ----------- | GND PB0 | < -------KEY ( 4 )
GND< ---- + --- + ----------- | GND PB0 | < -------KEY ( 4 ) ( 3 )
| PB1|------->PREV(5)
| PB1|------->PREV (5) (4)
| |
| |
GND+-C2--+--|XTAL1 RXD|------->Debug Console
GND+-C2--+--|XTAL1 RXD|------->Debug Console
X1 | TXD|< -------Debug Console
X1 | TXD|< -------Debug Console
@ -134,5 +150,11 @@ Bread baord wires are used to connect Teensy++.
Z1,Z2: Zener 3.6V
Z1,Z2: Zener 3.6V
C1,C2: 22pF
C1,C2: 22pF
C3: 0.1uF
C3: 0.1uF
X1: Crystal 20MHz(16MHz/12MHz)
X1: Crystal 12MHz
SW: Push Switch(Optional for bootloader)
SW: Push Switch(for bootloader)
- NOTE: See [V-USB] documentation for more detail of hardware and the USB stack.
- NOTE: [USBaspLoader] is very useful for firmware update.
[V-USB]: http://www.obdev.at/products/vusb/index.html
[USBaspLoader]: http://www.obdev.at/products/vusb/usbasploader.html
tmk
11 years ago