diff --git a/keyboard/hhkb/README.md b/keyboard/hhkb/README.md index f7e96126..b9e0b534 100644 --- a/keyboard/hhkb/README.md +++ b/keyboard/hhkb/README.md @@ -2,128 +2,144 @@ Alternative Controller for HHKB Pro =================================== I wanted to add some features like vi cursor and mouse keys to my [HHKB][HHKB] but its controller is not programmable and firmware source code is not open, of course. This means customizing this keyboard needs to replace original -controller with programmable one. For this purpose I used PJRC [Teensy++][Teensy] as alternative controller. +controller with programmable one. This controller can work with HHKB Professional and Professional 2 model. + +See [this thread][AltController] in geekhack.org. [HHKB]: http://www.pfu.fujitsu.com/hhkeyboard/ +[AltController]: http://geekhack.org/index.php?topic=12047.0 [Teensy]: http://www.pjrc.com/teensy/ -My keyboard firmware source tree is here: http://github.com/tmk/tmk_keyboard -See directory keyboard/hhkb to build firmware for HHKB. - - ##Features * Customizable keymap * More keymap layers(more Fn keys) * Mouse keys * USB NKRO +See README of [tmk_keyboard] for more. + +[tmk_keyboard]: http://github.com/tmk/tmk_keyboard + ###Pros +* No risk: Everything is all reversible * Without PCB trace cutting, case mod or any destructives * Can keep original controller intact * Can change all HHKB behaviour as you like ###Cons * Void your warranty -* Lose USB hub function in case of Pro2 +* Lose USB hub function of Pro2 ##DISCLAIMER -I'm not a professional of electronics or MCU programming. This may damage your HHKB. +I'm not a professional of electronics nor MCU programming. This may damage your HHKB. And my English writing is poor, I'm not sure I can convey my notions accurately. +##Documents +See [doc/HHKB.txt](doc/HHKB.txt) and files under [doc/](doc/) for internal of HHKB and this controller. +##Build Firmware & Program +You can choose some combination of hardware and USB protocol stack([LUFA], [PJRC]). +### Install Tools +See [this document](../../doc/build.md). -##Build Firmware -You can choose some combination of MCU and USB protocol stack. - -### Teensy++(AVR USB family) with [LUFA] -0. Edit **matrix.c** to use your pin configuration. See doc/HHKB.txt for detail. - -1. Edit **keymap.c** to use your favoirte keymap. - -2. Edit **Makefile** if you want to use other `MCU` than Teensy++ 2.0. +### TMK Alt Controller Board + $ make -f Makefile.tmk -3. Build firmware binary file: - `$ make -f Makefile.lufa` +This programs the controller with [dfu-programmer] if the tool is intalled and configured properly. -4. Program MCU with PJRC [Teensy Loader] tool. If you install command line version of the loader just run: - `$ make -f Makefile.lufa teensy` + $ make -f Makefile.tmk dfu -[LUFA]: http://www.fourwalledcubicle.com/LUFA.php -[Teensy Loader]: http://www.pjrc.com/teensy/loader.html +Push reset button and program with [FLIP]. The tool should be intalled and configured properly. + $ make -f Makefile.tmk flip -###AVR Mega with [V-USB] -Follow below if you want to use AVR with V-USB as . +Or you can also program with FLIP GUI. -0. Edit **matrix.c** to use your pin configuration. See doc/HHKB.txt for detail. +[dfu-programmer]: http://dfu-programmer.sourceforge.net/ +[FLIP]: http://www.atmel.com/tools/FLIP.aspx -1. Edit **keymap.c** to use your favoirte keymap. -2. Edit **usbconfig.h** to configure V-USB options. +### PJRC Teensy++ +Build with [LUFA] USB stack: -3. Edit **Makefile.vusb** to define `MCU` and `F_CPU`. + $ make -f Makefile.lufa -4. Build firmware binary file: - `$ make -f Makefile.vusb` +or with [PJRC] USB stack: -5. Program MCU with AVR programmer like AVRISPmkII. If you already have [USBaspLoader] on MCU just run: - `$ make -f Makefile.vusb program` + $ make -f Makefile.pjrc -[V-USB]: http://www.obdev.at/products/vusb/index.html -[USBaspLoader]: http://www.obdev.at/products/vusb/usbasploader.html +Push reset button and program with [Teensy Loader(command line)]. The tool should be intalled and configured properly. + $ make -f Makefile.lufa teensy + $ make -f Makefile.pjrc teensy -###How to Customize Keymap -Later... -See **keymap.c**. +Or you can also program with [Teensy Loader(GUI)]. +[LUFA]: http://www.fourwalledcubicle.com/LUFA.php +[PJRC]: http://www.pjrc.com/teensy/usb_keyboard.html +[Teensy Loader(command line)]: http://www.pjrc.com/teensy/loader_cli.html +[Teensy Loader(GUI)]: http://www.pjrc.com/teensy/loader.html -##Hardware -###Teensy++ installation -Angled USB mini B adapter is used to install Teensy++ laterally. +###AVR Mega with [V-USB] +Build: + $ make -f Makefile.vusb -![Image of Teensy install](hhkb/doc/HHKB_img/teensy_install.jpg) +Program [USBaspLoader] on MCU with AVR programmer like [AVRISPmkII] and tool like [avrdude]. -Bread baord wires are used to connect Teensy++. +You can programs with [avrdude] once you have programmed [USBaspLoader] on MCU. + $ make -f Makefile.vusb program -![Image of Teensy wiring](hhkb/doc/HHKB_img/teensy_wiring.jpg) +[AVRISPmkII]: http://www.atmel.com/tools/AVRISPMKII.aspx +[avrdude]: http://www.nongnu.org/avrdude/ -![Image of Connector](hhkb/doc/HHKB_img/connector_contact.jpg) +##How to Customize +See [tmk_keyboard] documents. -###PJRC Teensy++ 2.0 connection - +---------------+ - | Teensy++ | - | | - | | HHKB - | | ~~~~ - | PB0-2|------->ROW(6-8) - | PB3-5|------->COL(9-11) - | PB6|------->ENABLE(12) - | PE6|<-------KEY(4) - | PE7|------->PREV(5) - | | - | | - | | - +---------------+ +##Hardware +You have some options for hardware. Development boards with USB AVR family(ATMega32U4, AT90USB1286) like Teensy will work while MegaAVR with V-USB library is also cheapear option for DIY. + +###1. TMK Alt Controller Board +TMK designed [Keyboard Controller Board for HHKB Pro2(KiCad project)](https://github.com/tmk/HHKB_controller). +See [this post](http://geekhack.org/index.php?topic=12047.msg948923#msg948923). + + +###2. PJRC Teensy++ 2.0 connection + +---------------+ + | Teensy++ | + | | + | | HHKB pro HHKB pro2 + | | ~~~~~~~~ ~~~~~~~~~ + | PB0-2|------->ROW (6-8) (5-7) + | PB3-5|------->COL (9-11) (8-10) + | PB6|------->ENABLE (12) (11) + | PE6|<-------KEY (4) (3) + | PE7|------->PREV (5) (4) + | | + | | 5V--- (1-3) (1-2) + | | GND--- (13-14) (12-13) + +---------------+ + +- NOTE: PJRC [Teensy](http://www.pjrc.com/teensy/) +[Teensy Loader]: http://www.pjrc.com/teensy/loader.html -###V-USB circuit +###3. V-USB connection +---+ +---------------+ - USB GND | | ATmega168 | + USB GND | | ATmega328p | ~~~ C3 | | - 5V <-------+--------+---|Vcc,AVCC | HHKB - R1 | | ~~~~ - D- <----+--+-----R2-----|INT1 PB2-4|------->ROW(6-8) - D+ <----|---+----R3-----|INT0 PC0-2|------->COL(9-11) - Z1 Z2 | PC3|------->ENABLE(12) - GND<----+---+-----------|GND PB0|<-------KEY(4) - | PB1|------->PREV(5) + 5V <-------+--------+---|Vcc,AVCC | HHKB pro pro2 + R1 | | ~~~~~~~~ ~~~~ + D- <----+--+-----R2-----|INT1 PB2-4|------->ROW (6-8) (5-7) + D+ <----|---+----R3-----|INT0 PC0-2|------->COL (9-11) (8-10) + Z1 Z2 | PC3|------->ENABLE (12) (11) + GND<----+---+-----------|GND PB0|<-------KEY (4) (3) + | PB1|------->PREV (5) (4) | | GND+-C2--+--|XTAL1 RXD|------->Debug Console X1 | TXD|<-------Debug Console @@ -134,5 +150,11 @@ Bread baord wires are used to connect Teensy++. Z1,Z2: Zener 3.6V C1,C2: 22pF C3: 0.1uF - X1: Crystal 20MHz(16MHz/12MHz) - SW: Push Switch(Optional for bootloader) + X1: Crystal 12MHz + SW: Push Switch(for bootloader) + +- NOTE: See [V-USB] documentation for more detail of hardware and the USB stack. +- NOTE: [USBaspLoader] is very useful for firmware update. + +[V-USB]: http://www.obdev.at/products/vusb/index.html +[USBaspLoader]: http://www.obdev.at/products/vusb/usbasploader.html diff --git a/keyboard/hhkb/doc/HHKB.txt b/keyboard/hhkb/doc/HHKB.txt index f99a0744..422c452c 100644 --- a/keyboard/hhkb/doc/HHKB.txt +++ b/keyboard/hhkb/doc/HHKB.txt @@ -30,25 +30,27 @@ Connector Cable Two PCBs are connected by 15 lines(13 in case of Pro2). Vcc and GND use 3(2) lines each, other 9 lines are for keyboard signaling. - Keyswitch PCB connector Teensy++ pins - ------------------------------------------------------------------------------- - 1 Vcc(5V) Not exist on Pro2 5V - 2 Vcc(5V) 5V - 3 Vcc(5V) 5V - 4 TP1684 KEY: Low(0) when key pressed PE6 input(with pullup) - 5 TP1684 KEY_PREV: assert previous key state??? PE7 output - 6 HC4051 A(bit0) select 8 rows(0 to 7) PB0 output - 7 HC4051 B(bit1) PB1 output - 8 HC4051 C(bit2) PB2 output - 9 LS145 A(bit0) select 8 columns(0 to 7) PB3 output - 10 LS145 B(bit1) PB4 output - 11 LS145 C(bit2) PB5 output - 12 LS145 D(enable) Low(0) enable selected column PB6 output - 13 GND GND - 14 GND GND - 15 GND Not exist on Pro2 GND + Keyswitch connector + pro pro2 Description Teensy++ pins + -------------------------------------------------------------------------------------------- + 1 Vcc(5V) Not exist on Pro2 5V + 2 1 Vcc(5V) 5V + 3 2 Vcc(5V) 5V + 4 3 TP1684 KEY: Low(0) when key pressed PE6 input(with pullup) + 5 4 TP1684 KEY_PREV: make threshold PE7 output + 6 5 HC4051 A(bit0)\ PB0 output + 7 6 HC4051 B(bit1) > select row(0 to 7) PB1 output + 8 7 HC4051 C(bit2)/ PB2 output + 9 8 LS145 A(bit0)\ PB3 output + 10 9 LS145 B(bit1) > select column(0 to 7) PB4 output + 11 10 LS145 C(bit2)/ PB5 output + 12 11 LS145 D(enable) Low(0) enables selected column PB6 output + 13 12 GND GND + 14 13 GND GND + 15 GND Not exist on Pro2 GND NOTE: guessing pin5(KEY_PREV) may work for hysteresis of capacitive sensing. + NOTE: 1KOhm didn't work as pullup resistor on KEY. AVR internal pullup or 10KOhm resistor was OK. (HHKB_connector.jpg)