Add pearl README, add rask's Pearl layout
Otto Rask
7 years ago
committed by
Jack Humbert
parent
ee1bb85542
commit
b922a550dc
@ -0,0 +1,85 @@
|
||||
# Pearl 40%
|
||||
|
||||
Pearl 40% is a keyboard designed by Koobaczech. It uses an Atmel
|
||||
ATMEGA32A MCU.
|
||||
|
||||
## Compiling and flashing
|
||||
|
||||
These instructions are for building and flashing your Pearl 40% without
|
||||
Bootmapper Client.
|
||||
|
||||
### Requirements
|
||||
|
||||
#### Windows
|
||||
|
||||
(to be written, help needed)
|
||||
|
||||
#### Mac
|
||||
|
||||
Apart from regular QMK and AVR dependencies you need to install
|
||||
`bootloadHID`. You can install it with `homebrew` as follows:
|
||||
|
||||
$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
|
||||
|
||||
If you don't use `homebrew` you can try following the compiling
|
||||
instructions defined below in the Linux section.
|
||||
|
||||
#### Linux
|
||||
|
||||
For Linux you require all regular QMK dependencies, but make sure you're
|
||||
using `gcc-avr` version 4.9 or higher. 4.8 and lower do not contain the
|
||||
proper definitions for ATMEGA32A MCUs and QMK will fail while attempting
|
||||
to compile a HEX for Pearl 40%.
|
||||
|
||||
E.g. you cannot compile Pearl 40% HEX on a regular Ubuntu 14.04 as
|
||||
`gcc-avr` version is maxed to 4.8 on it.
|
||||
|
||||
Additionally you need an operational `bootloadHID` binary.
|
||||
|
||||
You can install `bootloadHID` by taking the following steps:
|
||||
|
||||
$ git clone https://github.com/robertgzr/bootloadHID ~/tmp/bootloadHIDsrc
|
||||
$ cd ~/tmp/bootloadHIDsrc/commandline
|
||||
$ make VENDORID=0x16c0 PRODUCTID=0x05DF # vid and pid for atmega32a
|
||||
$ chmod +x bootloadHID && cp bootloadHID /usr/bin/bootloadHID
|
||||
|
||||
Running `which bootloadHID` should return `/usr/bin/bootloadHID`.
|
||||
|
||||
### Compiling
|
||||
|
||||
Enter the QMK root directory and compile a keymap with the following
|
||||
command:
|
||||
|
||||
$ make pearl:<keymap>
|
||||
|
||||
where `<keymap>` is a layout directory under the `pearl` directory.
|
||||
|
||||
QMK should compile a HEX (called `pearl_<keymap>.hex`) for you, which
|
||||
you can flash using `bootloadHID`.
|
||||
|
||||
### Flashing
|
||||
|
||||
To enable Pearl 40% bootloading mode, unplug the keyboard, then plug it
|
||||
in while holding `Esc` at the same time (the top-leftmost switch on the
|
||||
PCB, next to the USB connector). Once the board is in bootload mode,
|
||||
issue the following command (you might require `sudo` to perform the
|
||||
command):
|
||||
|
||||
# assuming we're still in the QMK root dir where you compiled a HEX into
|
||||
$ bootloadHID -r ./pearl_<keymap>.hex
|
||||
|
||||
You should see something similar to
|
||||
|
||||
> Page size = <value>
|
||||
> Device size = <value>; <value> remaining
|
||||
> Uploading <value> bytes starting at 0 (0x0)
|
||||
> <value> ... <current value>
|
||||
|
||||
where `<current value>` should be slowly increasing as the HEX is being
|
||||
flashed to the board. If there is some warning about `resource busy` it
|
||||
should still work OK.
|
||||
|
||||
Once done the board underglow should turn red and the new firmware has
|
||||
been flashed. If you can't type on the board try plugging it in again
|
||||
(without holding any keys to prevent accidentally setting it into
|
||||
bootload mode again).
|
||||
@ -0,0 +1,5 @@
|
||||
root = true
|
||||
|
||||
[*.c]
|
||||
indent_size = 4
|
||||
indent_style = space
|
||||
@ -0,0 +1,23 @@
|
||||
# rask's Pearl 40%
|
||||
|
||||
## Layout
|
||||
|
||||
The firmware offers five layers:
|
||||
|
||||
1. Base layer
|
||||
2. Base with numbers and symbols (Fn1)
|
||||
3. Base with F-row and arrows (Fn2)
|
||||
4. Base with media and RGB controls (Fn3)
|
||||
5. More nav and utils (Fn2+Fn3, aka NavFn)
|
||||
|
||||
|
||||
|
||||
Base for this firmware copied from jetpacktuxedo's QMK firmware.
|
||||
|
||||
---
|
||||
|
||||
## Compiling and flashing
|
||||
|
||||
To compile a HEX follow the Pearl 40% instructions.
|
||||
|
||||
Flashing instructions also available at Pearl 40% instructions.
|
||||
@ -0,0 +1,87 @@
|
||||
#include "pearl.h"
|
||||
|
||||
#define ____ KC_TRNS
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
// BASE LAYER
|
||||
[0] = KEYMAP(
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,
|
||||
MO(2), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(3),
|
||||
KC_LCTL, KC_LALT, KC_BSPC, MO(1), MO(1), KC_SPC, KC_RALT, KC_LGUI
|
||||
),
|
||||
// BASE LAYER TWO (Fn1)
|
||||
[1] = KEYMAP(
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,
|
||||
____, ____, ____, ____, ____, ____, ____, ____, ____, ____, KC_QUOT, KC_BSLS,
|
||||
____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, KC_RSFT,
|
||||
____, ____, ____, ____, ____, ____, ____, ____
|
||||
),
|
||||
// FROW LAYER AND ARROWS (Fn2)
|
||||
[2] = KEYMAP(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
|
||||
____, ____, ____, ____, ____, ____, ____, ____, ____, KC_UP, ____, ____,
|
||||
____, ____, ____, ____, ____, ____, ____, ____, KC_LEFT, KC_DOWN,KC_RGHT, MO(4),
|
||||
____, ____, ____, ____, ____, ____, ____, ____
|
||||
),
|
||||
// MEDIA AND RGB (Fn3)
|
||||
[3] = KEYMAP(
|
||||
____, ____, ____, ____, ____, ____, ____, ____, ____, KC_MPRV,KC_MPLY, KC_MNXT, KC_DEL,
|
||||
____, ____, ____, RGB_HUI, RGB_SAI,RGB_VAI,____, ____, ____, ____, ____, ____,
|
||||
____, RGB_MOD, RGB_TOG, RGB_HUD, RGB_SAD,RGB_VAD,____, ____, ____, ____, ____, ____,
|
||||
____, ____, ____, ____, ____, ____, ____, ____
|
||||
),
|
||||
// UTIL (Fn1+Fn3)
|
||||
[4] = KEYMAP(
|
||||
____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, KC_PSCR, ____,
|
||||
____, ____, ____, ____, ____, ____, ____, ____, ____, KC_PGUP,____, ____,
|
||||
____, ____, ____, ____, ____, ____, ____, ____, KC_HOME, KC_PGDN,KC_END, ____,
|
||||
RESET, ____, ____, ____, ____, ____, ____, ____
|
||||
),
|
||||
};
|
||||
|
||||
/**
|
||||
* Status LED layer indicators courtesy of jetpacktuxedo's firmware
|
||||
*/
|
||||
uint32_t layer_state_set_kb(uint32_t state)
|
||||
{
|
||||
// if we are on layer 1
|
||||
if (state & (1<<1)){
|
||||
// light num lock led
|
||||
PORTD |= (1 << PD0);
|
||||
} else{
|
||||
PORTD &= ~(1 << PD0);
|
||||
}
|
||||
|
||||
// if we are on layer 2
|
||||
if (state & (1<<2)){
|
||||
// light caps lock led
|
||||
PORTD |= (1 << PD1);
|
||||
} else{
|
||||
PORTD &= ~(1 << PD1);
|
||||
}
|
||||
|
||||
// if we are on layer 3
|
||||
if (state & (1<<3)){
|
||||
// light scroll lock led
|
||||
PORTD |= (1 << PD6);
|
||||
} else{
|
||||
PORTD &= ~(1 << PD6);
|
||||
}
|
||||
|
||||
/*
|
||||
// if we are on layer 4
|
||||
if (state & (1<<4)){
|
||||
// light all leds
|
||||
PORTD |= (1 << PD0);
|
||||
PORTD |= (1 << PD1);
|
||||
PORTD |= (1 << PD6);
|
||||
} else{
|
||||
PORTD &= ~(1 << PD0);
|
||||
PORTD &= ~(1 << PD1);
|
||||
PORTD &= ~(1 << PD6);
|
||||
}
|
||||
*/
|
||||
|
||||
return state;
|
||||
}
|
||||
Loading…
Reference in New Issue