do a little cleanup

keyboards/teensy_lc_synth/Makefile

@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif

keyboards/teensy_lc_synth/chconf.h

@@ -0,0 +1,524 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 20
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE              TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           TRUE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                TRUE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               TRUE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           TRUE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 TRUE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */

keyboards/teensy_lc_synth/config.h

@@ -0,0 +1,68 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xC1ED
+#define PRODUCT_ID      0x2370
+#define DEVICE_VER      0x0001
+/* in python2: list(u"whatever".encode('utf-16-le')) */
+/*   at most 32 characters or the ugly hack in usb_main.c borks */
+#define MANUFACTURER "Clueboard"
+#define USBSTR_MANUFACTURER    'C', '\x00', 'l', '\x00', 'u', '\x00', 'e', '\x00', 'b', '\x00', 'o', '\x00', 'a', '\x00', 'r', '\x00', 'd', '\x00'
+#define PRODUCT "Teensy LC Synth"
+#define USBSTR_PRODUCT         'T', '\x00', 'e', '\x00', 'e', '\x00', 'n', '\x00', 's', '\x00', 'y', '\x00', ' ', '\x00', 'L', '\x00', 'C', '\x00', ' ', '\x00', 'S', '\x00', 'y', '\x00', 'n', '\x00', 't', '\x00', 'h', '\x00'
+#define DESCRIPTION "Mini synth board by Clueboard."
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 4
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif

keyboards/teensy_lc_synth/halconf.h

@@ -0,0 +1,187 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */

keyboards/teensy_lc_synth/keymaps/default/keymap.c

@@ -0,0 +1,31 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "teensy_lc_synth.h"
+
+const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    KEYMAP(
+           KC_1, KC_2,       KC_3, KC_4, KC_5, \
+        KC_C, KC_D, KC_E, KC_F, KC_G, KC_A, KC_B \
+    )
+/*
+    KEYMAP(
+           KC_NO, KC_NO,       KC_NO, KC_NO, KC_NO, \
+        KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO \
+    )
+*/
+};

keyboards/teensy_lc_synth/ld/MKL26Z64.ld

@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com
+ *           (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/*
+ * KL26Z64 memory setup.
+ */
+MEMORY
+{
+  flash0   : org = 0x00000000, len = 0x100
+  flash1   : org = 0x00000400, len = 0x10
+  flash2   : org = 0x00000410, len = 62k - 0x410
+  flash3   : org = 0x0000F800, len = 2k
+  flash4   : org = 0x00000000, len = 0
+  flash5   : org = 0x00000000, len = 0
+  flash6   : org = 0x00000000, len = 0
+  flash7   : org = 0x00000000, len = 0
+  ram0     : org = 0x1FFFF800, len = 8k
+  ram1     : org = 0x00000000, len = 0
+  ram2     : org = 0x00000000, len = 0
+  ram3     : org = 0x00000000, len = 0
+  ram4     : org = 0x00000000, len = 0
+  ram5     : org = 0x00000000, len = 0
+  ram6     : org = 0x00000000, len = 0
+  ram7     : org = 0x00000000, len = 0
+}
+
+/* Flash region for the configuration bytes.*/
+SECTIONS
+{
+  .cfmprotect : ALIGN(4) SUBALIGN(4)
+  {
+    KEEP(*(.cfmconfig))
+  } > flash1
+}
+
+/* For each data/text section two region are defined, a virtual region
+   and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash2);
+REGION_ALIAS("XTORS_FLASH_LMA", flash2);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash2);
+REGION_ALIAS("TEXT_FLASH_LMA", flash2);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash2);
+REGION_ALIAS("RODATA_FLASH_LMA", flash2);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash2);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+   of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+   the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash2);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+__eeprom_workarea_start__ = ORIGIN(flash3);
+__eeprom_workarea_size__  = LENGTH(flash3);
+__eeprom_workarea_end__   = __eeprom_workarea_start__ + __eeprom_workarea_size__;
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld

keyboards/teensy_lc_synth/led.c

@@ -0,0 +1,24 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "hal.h"
+
+#include "led.h"
+
+
+void led_set(uint8_t usb_led) {
+}

keyboards/teensy_lc_synth/matrix.c

@@ -0,0 +1,167 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+/*
+ * scan matrix
+ */
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "wait.h"
+
+#ifndef DEBOUNCE
+#   define DEBOUNCE 5
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+
+inline
+uint8_t matrix_rows(void) {
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void) {
+    return MATRIX_COLS;
+}
+
+void matrix_init(void) {
+    // initialize row and col
+    palSetPadMode(TEENSY_PIN13_IOPORT, TEENSY_PIN13, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(TEENSY_PIN12_IOPORT, TEENSY_PIN12, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(TEENSY_PIN18_IOPORT, TEENSY_PIN18, PAL_MODE_OUTPUT_PUSHPULL);
+    init_cols();
+
+    // initialize LED
+    //palSetPadMode(TEENSY_PIN20_IOPORT, TEENSY_PIN20, PAL_MODE_OUTPUT_PUSHPULL);
+
+    // Turn on C's LED
+    //palClearPad(TEENSY_PIN20_IOPORT, TEENSY_PIN20);
+    //palSetPad(TEENSY_PIN10_IOPORT, TEENSY_PIN10);
+    
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+
+    //debug
+    debug_matrix = true;
+}
+
+uint8_t matrix_scan(void) {
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        select_row(i);
+        wait_us(30);  // without this wait read unstable value.
+        matrix_row_t cols = read_cols();
+        if (matrix_debouncing[i] != cols) {
+            matrix_debouncing[i] = cols;
+            if (debouncing) {
+                debug("bounce!: "); debug_hex(debouncing); debug("\n");
+            }
+            debouncing = DEBOUNCE;
+        }
+        unselect_rows();
+    }
+
+    if (debouncing) {
+        if (--debouncing) {
+            wait_ms(1);
+        } else {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+        }
+    }
+
+    return 1;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col) {
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row) {
+    return matrix[row];
+}
+
+void matrix_print(void) {
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse16(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+/* Column pin configuration
+ */
+static void init_cols(void) {
+    // Set columns to input mode so they can be read.
+    palSetPadMode(TEENSY_PIN14_IOPORT, TEENSY_PIN14, PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(TEENSY_PIN15_IOPORT, TEENSY_PIN15, PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(TEENSY_PIN16_IOPORT, TEENSY_PIN16, PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(TEENSY_PIN11_IOPORT, TEENSY_PIN11, PAL_MODE_INPUT_PULLDOWN);
+}
+
+/* Returns status of switches(1:on, 0:off) */
+static matrix_row_t read_cols(void) {
+    return ((palReadPad(TEENSY_PIN14_IOPORT, TEENSY_PIN14)==PAL_LOW) ? 0 : (1<<0)) |
+        ((palReadPad(TEENSY_PIN15_IOPORT, TEENSY_PIN15)==PAL_LOW) ? 0 : (1<<1)) |
+        ((palReadPad(TEENSY_PIN16_IOPORT, TEENSY_PIN16)==PAL_LOW) ? 0 : (1<<2)) |
+        ((palReadPad(TEENSY_PIN11_IOPORT, TEENSY_PIN11)==PAL_LOW) ? 0 : (1<<3));
+}
+
+/* Row pin configuration
+ */
+static void unselect_rows(void) {
+    // internal pull-down
+    palClearPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13);
+    palClearPad(TEENSY_PIN12_IOPORT, TEENSY_PIN12);
+    palClearPad(TEENSY_PIN18_IOPORT, TEENSY_PIN18);
+}
+
+static void select_row(uint8_t row) {
+    (void)row;
+    // Output high to select
+    switch (row) {
+        case 0:
+            palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13);
+            break;
+        case 1:
+            palSetPad(TEENSY_PIN12_IOPORT, TEENSY_PIN12);
+            break;
+        case 2:
+            palSetPad(TEENSY_PIN18_IOPORT, TEENSY_PIN18);
+            break;
+    }
+}

keyboards/teensy_lc_synth/mcuconf.h

@@ -0,0 +1,55 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define KL2x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#if 1
+/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_PEE
+#define KINETIS_PLLCLK_FREQUENCY    96000000UL
+#define KINETIS_SYSCLK_FREQUENCY    48000000UL
+#endif
+
+#if 0
+/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
+#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
+#define KINETIS_CLKDIV1_OUTDIV1     1           /* do not divide system clock */
+#endif
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0              TRUE
+
+/*
+ * USB driver settings
+ */
+#define KINETIS_USB_USE_USB0                  TRUE
+/* Need to redefine this, since the default is for K20x */
+/* This is for Teensy LC; you should comment it out (or change to 5)
+ * for Teensy 3.x */
+#define KINETIS_USB_USB0_IRQ_PRIORITY         2
+
+#endif /* _MCUCONF_H_ */

keyboards/teensy_lc_synth/rules.mk

@@ -0,0 +1,59 @@
+# project specific files
+SRC =	matrix.c \
+	    led.c
+
+## chip/board settings
+# - the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+# - For Teensies, FAMILY = KINETIS and SERIES is either
+#   KL2x (LC) or K20x (3.0,3.1,3.2).
+MCU_FAMILY = KINETIS
+MCU_SERIES = KL2x
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
+# - LDSCRIPT =
+#   - MKL26Z64 for Teensy LC
+#   - MK20DX128 for Teensy 3.0
+#   - MK20DX256 for Teensy 3.1 and 3.2
+MCU_LDSCRIPT = MKL26Z64
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+# - STARTUP =
+#   - kl2x for Teensy LC
+#   - k20x5 for Teensy 3.0
+#   - k20x7 for Teensy 3.1 and 3.2
+MCU_STARTUP = kl2x
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# - BOARD =
+#   - PJRC_TEENSY_LC for Teensy LC
+#   - PJRC_TEENSY_3 for Teensy 3.0
+#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
+BOARD = PJRC_TEENSY_LC
+
+# Cortex version
+# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4
+MCU  = cortex-m0plus
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+# I.e. 6 for Teensy LC; 7 for Teensy 3.x
+ARMV = 6
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
+
+# QMK Features
+#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes   # Mouse keys
+EXTRAKEY_ENABLE = yes   # Audio control and System control
+CONSOLE_ENABLE = yes    # Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes           # USB Nkey Rollover
+CUSTOM_MATRIX = yes # Custom matrix file

keyboards/teensy_lc_synth/teensy_lc_synth.c

@@ -0,0 +1 @@
+#include "teensy_lc_synth.h"

keyboards/teensy_lc_synth/teensy_lc_synth.h

@@ -0,0 +1,14 @@
+#ifndef TEENSY_LC_SYNTH_H
+#define TEENSY_LC_SYNTH_H
+#include "quantum.h"
+
+#define KEYMAP( \
+         k10, k01,      k02, k22, k13, \
+      k00, k20, k11, k21, k12, k03, k23 \
+) { \
+    { k00, k01, k02, k03 }, \
+    { k10, k11, k12, k13 }, \
+    { k20, k21, k22, k23 }, \
+}
+
+#endif

keyboards/uk78/config.h

@@ -1,18 +1,18 @@
-/*
+/*
-Copyright 2012 Jun Wako <ukkeyboards@gmail.com>
+Copyright 2012 Jun Wako <ukkeyboards@gmail.com>
-
+
-This program is free software: you can redistribute it and/or modify
+This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
+it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
+the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
+(at your option) any later version.
-
+
-This program is distributed in the hope that it will be useful,
+This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
+but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
+GNU General Public License for more details.
-
+
-You should have received a copy of the GNU General Public License
+You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #ifndef CONFIG_H
@@ -73,4 +73,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_VAL_STEP 8
 #endif
 
-#endif
+#endif

keyboards/uk78/keymaps/default/keymap.c

@@ -1,119 +1,119 @@
-#include "uk78.h"
+#include "uk78.h"
-
+
-// Helpful defines
+// Helpful defines
-#define _______ KC_TRNS
+#define _______ KC_TRNS
-
+
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
+// entirely and just use numbers.
-#define _BL 0
+#define _BL 0
-#define _FL1 1
+#define _FL1 1
-#define _FL2 2
+#define _FL2 2
-
+
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* _BL: Base Layer(Default) - For ISO enter use ANSI \
+    /* _BL: Base Layer(Default) - For ISO enter use ANSI \
-    * ,-------------------------------------------------------------------------------.
+    * ,-------------------------------------------------------------------------------.
-    * |Esc | 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =| /|BSpc| Del|  P/|  P*|  P-|
+    * |Esc | 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =| /|BSpc| Del|  P/|  P*|  P-|
-    * |-------------------------------------------------------------------------------|
+    * |-------------------------------------------------------------------------------|
-    * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |  P7|  P8|  P9|  P=|
+    * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |  P7|  P8|  P9|  P=|
-    * |-------------------------------------------------------------------------------|
+    * |-------------------------------------------------------------------------------|
-    * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '| #| Ent|  P4|  P5|  P6|  P+|
+    * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '| #| Ent|  P4|  P5|  P6|  P+|
-    * |-------------------------------------------------------------------------------|
+    * |-------------------------------------------------------------------------------|
-    * |Shift| \|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | Up|  P1|  P2|  P3|SLck|
+    * |Shift| \|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | Up|  P1|  P2|  P3|SLck|
-    * |-------------------------------------------------------------------------------|
+    * |-------------------------------------------------------------------------------|
-    * |Ctrl|Win |Alt |        Space        |Alt|Mo(1)|Ctrl|Lef|Dow| Rig|  P0|  P.|PEnt|
+    * |Ctrl|Win |Alt |        Space        |Alt|Mo(1)|Ctrl|Lef|Dow| Rig|  P0|  P.|PEnt|
-    * `-------------------------------------------------------------------------------'
+    * `-------------------------------------------------------------------------------'
-    */
+    */
-    [_BL] = KEYMAP(
+    [_BL] = KEYMAP(
-        KC_ESC,  KC_1,    KC_2,    KC_3,   KC_4,    KC_5,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSLS, KC_BSPC, KC_DEL,  KC_PSLS, KC_PAST, KC_PMNS,
+        KC_ESC,  KC_1,    KC_2,    KC_3,   KC_4,    KC_5,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSLS, KC_BSPC, KC_DEL,  KC_PSLS, KC_PAST, KC_PMNS,
-        KC_TAB,  KC_Q,    KC_W,    KC_E,   KC_R,    KC_T,  KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,           KC_BSLS, KC_P7,   KC_P8,   KC_P9,   KC_PEQL,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,   KC_R,    KC_T,  KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,           KC_BSLS, KC_P7,   KC_P8,   KC_P9,   KC_PEQL,
-        KC_CAPS, KC_A,    KC_S,    KC_D,   KC_F,    KC_G,  KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS,           KC_ENT,  KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
+        KC_CAPS, KC_A,    KC_S,    KC_D,   KC_F,    KC_G,  KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS,           KC_ENT,  KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
-        KC_LSFT, KC_NUBS, KC_Z,    KC_X,   KC_C,    KC_V,  KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,  KC_RSFT, KC_UP,   KC_P1,   KC_P2,   KC_P3,   KC_SLCK,
+        KC_LSFT, KC_NUBS, KC_Z,    KC_X,   KC_C,    KC_V,  KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,  KC_RSFT, KC_UP,   KC_P1,   KC_P2,   KC_P3,   KC_SLCK,
-        KC_LCTL, KC_LGUI, KC_LALT,                         KC_SPC,                             KC_RALT, MO(_FL1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0,   KC_PDOT, KC_PENT),
+        KC_LCTL, KC_LGUI, KC_LALT,                         KC_SPC,                             KC_RALT, MO(_FL1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0,   KC_PDOT, KC_PENT),
-    /* _FL1: Function Layer 1 - For ISO enter use ANSI \
+    /* _FL1: Function Layer 1 - For ISO enter use ANSI \
-    * ,-------------------------------------------------------------------------------.
+    * ,-------------------------------------------------------------------------------.
-    * |  `|F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|PScr|Ins|NLck|    |    |    |
+    * |  `|F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|PScr|Ins|NLck|    |    |    |
-    * |-------------------------------------------------------------------------------|
+    * |-------------------------------------------------------------------------------|
-    * |     |   |   |   |RST|   |   |   |   |   |   |   |   |     |    |    |    |    |
+    * |     |   |   |   |RST|   |   |   |   |   |   |   |   |     |    |    |    |    |
-    * |-------------------------------------------------------------------------------|
+    * |-------------------------------------------------------------------------------|
-    * |       |   |   |   |   |   |Hu+|Va+|Sa+|   |   |   |  |    |    |    |    |    |
+    * |       |   |   |   |   |   |Hu+|Va+|Sa+|   |   |   |  |    |    |    |    |    |
-    * |-------------------------------------------------------------------------------|
+    * |-------------------------------------------------------------------------------|
-    * |     |   |   |   |   |RGB|Hu-|Va-|Sa-|Bl-|Bl+|   |Mute|Vol+|    |    |    |    |
+    * |     |   |   |   |   |RGB|Hu-|Va-|Sa-|Bl-|Bl+|   |Mute|Vol+|    |    |    |    |
-    * |-------------------------------------------------------------------------------|
+    * |-------------------------------------------------------------------------------|
-    * |    |    |    |      BL_Toggle       |   |   |   |    |Vol-|    |    |    |    |
+    * |    |    |    |      BL_Toggle       |   |   |   |    |Vol-|    |    |    |    |
-    * `-------------------------------------------------------------------------------'
+    * `-------------------------------------------------------------------------------'
-    */
+    */
-    [_FL1] = KEYMAP(
+    [_FL1] = KEYMAP(
-        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_INS,  KC_NLCK, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_INS,  KC_NLCK, KC_TRNS, KC_TRNS, KC_TRNS,
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_HUD, RGB_SAD, RGB_VAD, BL_DEC,  BL_INC,  KC_TRNS, KC_MUTE, KC_MUTE, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_HUD, RGB_SAD, RGB_VAD, BL_DEC,  BL_INC,  KC_TRNS, KC_MUTE, KC_MUTE, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-        KC_TRNS, KC_TRNS, KC_TRNS,                            BL_TOGG,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+        KC_TRNS, KC_TRNS, KC_TRNS,                            BL_TOGG,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-    /* _FL2: Function Layer 2 - For ISO enter use ANSI \
+    /* _FL2: Function Layer 2 - For ISO enter use ANSI \
-    * ,-------------------------------------------------------------------------------.
+    * ,-------------------------------------------------------------------------------.
-    * |   |  |   |   |   |   |   |   |   |   |   |   |   |    |   |    |    |    |    |
+    * |   |  |   |   |   |   |   |   |   |   |   |   |   |    |   |    |    |    |    |
-    * |-------------------------------------------------------------------------------|
+    * |-------------------------------------------------------------------------------|
-    * |     |   |   |   |   |   |   |   |   |   |   |   |   |     |    |    |    |    |
+    * |     |   |   |   |   |   |   |   |   |   |   |   |   |     |    |    |    |    |
-    * |-------------------------------------------------------------------------------|
+    * |-------------------------------------------------------------------------------|
-    * |       |   |   |   |   |   |   |   |   |   |   |   |  |    |    |    |    |    |
+    * |       |   |   |   |   |   |   |   |   |   |   |   |  |    |    |    |    |    |
-    * |-------------------------------------------------------------------------------|
+    * |-------------------------------------------------------------------------------|
-    * |     |   |   |   |   |   |   |   |   |   |   |   |    |    |    |    |    |    |
+    * |     |   |   |   |   |   |   |   |   |   |   |   |    |    |    |    |    |    |
-    * |-------------------------------------------------------------------------------|
+    * |-------------------------------------------------------------------------------|
-    * |    |    |    |                      |   |   |   |    |    |    |    |    |    |
+    * |    |    |    |                      |   |   |   |    |    |    |    |    |    |
-    * `-------------------------------------------------------------------------------'
+    * `-------------------------------------------------------------------------------'
-    */
+    */
-    [_FL2] = KEYMAP(
+    [_FL2] = KEYMAP(
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
+
-
+
-};
+};
-
+
-
+
-void matrix_init_user(void) {
+void matrix_init_user(void) {
-}
+}
-
+
-void matrix_scan_user(void) {
+void matrix_scan_user(void) {
-}
+}
-
+
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	return true;
+	return true;
-}
+}
-
+
-void led_set_user(uint8_t usb_led) {
+void led_set_user(uint8_t usb_led) {
-
+
-	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-		
+		
-	} else {
+	} else {
-		
+		
-	}
+	}
-
+
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRA |= (1 << 3); PORTA |= (1 << 3);
+		DDRA |= (1 << 3); PORTA |= (1 << 3);
-	} else {
+	} else {
-		DDRA &= ~(1 << 3); PORTA &= ~(1 << 3);
+		DDRA &= ~(1 << 3); PORTA &= ~(1 << 3);
-	}
+	}
-
+
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-		
+		
-	} else {
+	} else {
-		
+		
-	}
+	}
-
+
-	if (usb_led & (1 << USB_LED_COMPOSE)) {
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
-		
+		
-	} else {
+	} else {
-		
+		
-	}
+	}
-
+
-	if (usb_led & (1 << USB_LED_KANA)) {
+	if (usb_led & (1 << USB_LED_KANA)) {
-		
+		
-	} else {
+	} else {
-		
+		
-	}
+	}
-
+
 }

keyboards/uk78/readme.md

@@ -1,16 +1,16 @@
-# UK78
+# UK78
-
+
-![UK78](http://i.imgur.com/42pg6RS.png)
+![UK78](http://i.imgur.com/42pg6RS.png)
-
+
-A fully customizable 60%+numpad keyboard.
+A fully customizable 60%+numpad keyboard.
-
+
-* Keyboard Maintainer: [Rozakiin](https://github.com/rozakiin)
+* Keyboard Maintainer: [Rozakiin](https://github.com/rozakiin)
-* Hardware Supported: UK78 PCB
+* Hardware Supported: UK78 PCB
-  * rev2 
+  * rev2 
-* Hardware Availability: [ukkeyboards.](http://ukkeyboards.bigcartel.com/)
+* Hardware Availability: [ukkeyboards.](http://ukkeyboards.bigcartel.com/)
-
+
-Make example for this keyboard (after setting up your build environment):
+Make example for this keyboard (after setting up your build environment):
-
+
-    make uk78-default
+    make uk78-default
-
+
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.