Compare commits

...

1 Commits
master ... sid

Author SHA1 Message Date
Jack Humbert 56c47f2aed adds SID files 7 years ago

@ -0,0 +1,419 @@
/*
SID.cpp - Atmega8 MOS6581 SID Emulator
Copyright (c) 2007 Christoph Haberer, christoph(at)roboterclub-freiburg.de
Arduino Library Conversion by Mario Patino, cybernesto(at)gmail.com
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/************************************************************************
Atmega8 MOS6581 SID Emulator
SID = Sound Interface Device
This program tries to emulate the sound chip SID of the famous
historical C64 Commodore computer.
The SID emulator includes all registers of the original SID, but
some functions may not be implemented yet.
If you want to program the SID registers to generate your own sound,
please refer to the MOS6581 datasheet. The emulator tries to be as
compatible as possible.
In the main program there is an interrupt routine which sets the
ouptut values for the PWM-Output at 62.5kHz. Therefore the high
frequency noise of the PWM should not be audible to normal people.
The output is calculated with a 16kHz sample frequency to save
processing cycles.
The envelope generators are updated every 1ms.
The amplitude value is output as an 8Bit PWM value.
The PWM-Output may be directly connected to an audio amplifier.
************************************************************************
Hardware
processor: ATMEGA8, ATMEGA168
clock: 16MHz Crystal
PIN15 PB1/OC1A 8Bit PWM sound output
PIN19 PB0 test LED
***************************************************************************/
#include <avr/interrupt.h>
#include "SID.h"
// attack, decay, release envelope timings
const static uint16_t AttackRate[16]={2,4,16,24,38,58,68,80,100,250,500,800,1000,3000,5000,8000};
const static uint16_t DecayReleaseRate[16]={6,24,48,72,114,168,204,240,300,750,1500,2400,3000,9000,15000,24000};
static uint8_t output;
static Sid_t Sid;
static Oscillator_t osc[OSCILLATORS];
void initialize()
{
// TIMER1 used to generate sound output
// TIMER1: Fast PWM 8-bit
TCCR1A = (1 << WGM10) | (1 << COM1A1) ;
// TIMER1: no prescaling
TCCR1B = (1 << WGM12) | (1 << CS10);
#if defined(__AVR_ATmega8__)|| defined(__AVR_ATmega128__)
// TIMER2 used to generate sample and ms interrupts
// TIMER2: Normal Mode
TCCR2 = 0;
// TIMER2: clock/8 prescaling
TCCR2 |= (1 << CS21);
// TIMER2: set compare value to generate a 16kHz sample rate
OCR2 = SAMPLERATECOUNT;
// interrupt mask register: enable timer2 OCR2A interrupt
TIMSK = (1 << OCIE2);
// interrupt mask register: enable timer1 overflow
TIMSK |= (1 << TOIE1);
#else
// TIMER2 used to generate sample and ms interrupts
// TIMER2: Normal Mode
TCCR2A = 0 ;
// TIMER2: clock/8 prescaling
TCCR2B = (1 << CS21);
// TIMER2: set compare value to generate a 16kHz sample rate
OCR2A = SAMPLERATECOUNT;
// interrupt mask register: enable timer2 OCR2A interrupt
TIMSK2 = (1 << OCIE2A);
// interrupt mask register: enable timer1 overflow
TIMSK1 = (1 << TOIE1);
#endif
}
static int8_t wave(Voice_t *voice, uint16_t phase)
{
int8_t out;
uint8_t n = phase >> 8;
uint8_t wavetype = voice->ControlReg;
if(wavetype & SAWTOOTH)
{
out = n - 128;
}
if(wavetype & TRIANGLE)
{
if(n&0x80)
out = ((n^0xFF)<<1)-128;
else
out = (n<<1)-128;
}
if(wavetype & RECTANGLE)
{
if(n > (voice->PW >> 4)) // SID has 12Bit pwm, here we use only 8Bit
out = 127;
else
out = -127;
}
return out;
}
static void waveforms()
{
static uint16_t phase[3], sig[3];
static int16_t temp,temp1;
static uint8_t i,j,k;
static uint16_t noise = 0xACE1;
static uint8_t noise8;
static uint16_t tempphase;
// noise generator based on Galois LFSR
noise = (noise >> 1) ^ (-(noise & 1) & 0xB400u);
noise8 = noise>>8;
for(i = 0; i< 3; i++)
{
j = (i == 0 ? 2 : i - 1);
tempphase=phase[i]+osc[i].freq_coefficient; //0.88us
if(Sid.block.voice[i].ControlReg&NOISE)
{
if((tempphase^phase[i])&0x4000) sig[i]=noise8*osc[i].envelope;
}
else
{
if(Sid.block.voice[i].ControlReg&RINGMOD)
{
if(phase[j]&0x8000)
sig[i]=osc[i].envelope*-wave(&Sid.block.voice[i],phase[i]);
else
sig[i]=osc[i].envelope*wave(&Sid.block.voice[i],phase[i]);
}
else
{
if(Sid.block.voice[i].ControlReg&SYNC)
{
if(tempphase < phase[j])
phase[i] = 0;
}
else
sig[i]=osc[i].envelope*wave(&Sid.block.voice[i],phase[i]); //2.07us
}
}
phase[i]=tempphase;
}
// voice filter selection
temp=0; // direct output variable
temp1=0; // filter output variable
if(Sid.block.RES_Filt&FILT1) temp1+=sig[0];
else temp+=sig[0];
if(Sid.block.RES_Filt&FILT2) temp1+=sig[1];
else temp+=sig[1];
if(Sid.block.RES_Filt&FILT3) temp1+=sig[2];
else if(!(Sid.block.Mode_Vol&VOICE3OFF))temp+=sig[2]; // voice 3 with special turn off bit
//filterOutput = IIR2((struct IIR_filter*)&filter04_06, filterInput);
//IIR2(filter04_06, temp1);
k=(temp>>8)+128;
k+=temp1>>10; // no real filter implemeted yet
output = k; // Output to PWM
}
static void envelopes()
{
uint8_t n;
uint8_t controll_regadr[3]={4,11,18};
// if gate is ONE then the attack,decay,sustain cycle begins
// if gate switches to zero the sound decays
for(n=0;n<OSCILLATORS;n++)
{
if(Sid.sidregister[controll_regadr[n]]&GATE) // if gate set then attack,decay,sustain
{
if(osc[n].attackdecay_flag)
{ // if attack cycle
osc[n].amp+=osc[n].m_attack;
if(osc[n].amp>MAXLEVEL)
{
osc[n].amp=MAXLEVEL;
osc[n].attackdecay_flag=false; // if level reached, then switch to decay
}
}
else // decay cycle
{
if(osc[n].amp>osc[n].level_sustain)
{
osc[n].amp-=osc[n].m_decay;
if(osc[n].amp<osc[n].level_sustain) osc[n].amp=osc[n].level_sustain;
}
}
}
else // if gate flag is not set then release
{
osc[n].attackdecay_flag=true; // at next attack/decay cycle start wiht attack
if(osc[n].amp>0)
{
osc[n].amp-=osc[n].m_release;
if(osc[n].amp<0) osc[n].amp=0;
}
}
osc[n].envelope=osc[n].amp>>8;
}
}
/************************************************************************
interrupt routine timer 1 overflow
- set PWM output
************************************************************************/
ISR(TIMER1_OVF_vect)
{
OCR1A = output; // Output to PWM
}
/************************************************************************
interrupt routine timer 2 16kHz
- calculate waverform phases
- calculate waveforms
- calculate attack decay release (1kHz)
************************************************************************/
#if defined(__AVR_ATmega8__)|| defined(__AVR_ATmega128__)
ISR(TIMER2_COMP_vect)
{
static uint8_t mscounter = 0;
OCR2 += SAMPLERATECOUNT; // Output to PWM
waveforms(); //~22us
if(mscounter++ >= MSCOUNT)
{
envelopes(); //~16us
mscounter = 0;
}
}
#else
ISR(TIMER2_COMPA_vect)
{
static uint8_t mscounter = 0;
OCR2A += SAMPLERATECOUNT; // Output to PWM
waveforms(); //~36us
if(mscounter++ >= MSCOUNT)
{
envelopes(); //~16us
mscounter = 0;
}
}
#endif
// Constructor /////////////////////////////////////////////////////////////////
// Function that handles the creation and setup of instances
void SID::begin()
{
pinMode(9, OUTPUT);
initialize();
//initialize SID-registers
Sid.sidregister[6]=0xF0;
Sid.sidregister[13]=0xF0;
Sid.sidregister[20]=0xF0;
// set all amplitudes to zero
for(int n=0;n<OSCILLATORS;n++) {
osc[n].attackdecay_flag=true;
setenvelope(&Sid.block.voice[n]);
osc[n].amp=0;
}
}
// Public Methods //////////////////////////////////////////////////////////////
// Functions available in Wiring sketches, this library, and other libraries
/************************************************************************
uint8_t set_sidregister(uint8_t regnum, uint8_t value)
The registers of the virtual SID are set by this routine.
For some registers it is necessary to transform the SID-register
values to some internal settings of the emulator.
To select this registers and to start the calculation, the switch/
case statement is used.
For instance: If setting the SID envelope register, new attach, decay
sustain times are calculated.
If an invalid register is requested the returned value will be 0.
4.2007 ch
************************************************************************/
uint8_t SID::set_register(uint8_t regnum, uint8_t value)
{
if(regnum>NUMREGISTERS-1)
return 0;
Sid.sidregister[regnum]=value;
switch(regnum)
{
//voice1
case 1:
osc[0].freq_coefficient=((uint16_t)Sid.sidregister[0]+((uint16_t)Sid.sidregister[1]<<8))>>2;
break;
case 5: setenvelope(&Sid.block.voice[0]);break;
case 6: setenvelope(&Sid.block.voice[0]);break;
//voice2
case 8:
osc[1].freq_coefficient=((uint16_t)Sid.sidregister[7]+((uint16_t)Sid.sidregister[8]<<8))>>2;
break;
case 12: setenvelope(&Sid.block.voice[1]);break;
case 13: setenvelope(&Sid.block.voice[1]);break;
//voice3
case 15:
osc[2].freq_coefficient=((uint16_t)Sid.sidregister[14]+((uint16_t)Sid.sidregister[15]<<8))>>2;
break;
case 19: setenvelope(&Sid.block.voice[2]);break;
case 20: setenvelope(&Sid.block.voice[2]);break;
}
return 1;
}
/************************************************************************
uint8_t get_sidregister(uint8_t regnum)
The registers of the virtual SID are read by this routine.
If an invalid register is requested it returns zero.
************************************************************************/
uint8_t SID::get_register(uint8_t regnum)
{
if(regnum>NUMREGISTERS-1)
return 0;
return Sid.sidregister[regnum];
}
// Private Methods /////////////////////////////////////////////////////////////
// Functions only available to other functions in this library
uint8_t SID::get_wavenum(Voice_t *voice)
{
uint8_t n;
if(voice==&Sid.block.voice[0]) n=0;
if(voice==&Sid.block.voice[1]) n=1;
if(voice==&Sid.block.voice[2]) n=2;
return n;
}
void SID::setfreq(Voice_t *voice,uint16_t freq)
{
uint32_t templong;
uint8_t n;
n=get_wavenum(voice);
templong=freq;
osc[n].freq_coefficient=templong*4000/SAMPLEFREQ;
}
void SID::setenvelope(Voice_t *voice)
{
uint8_t n;
n=get_wavenum(voice);
osc[n].attackdecay_flag=true;
osc[n].level_sustain=(voice->SustainRelease>>4)*SUSTAINFACTOR;
osc[n].m_attack=MAXLEVEL/AttackRate[voice->AttackDecay>>4];
osc[n].m_decay=(MAXLEVEL-osc[n].level_sustain*SUSTAINFACTOR)/DecayReleaseRate[voice->AttackDecay&0x0F];
osc[n].m_release=(osc[n].level_sustain)/DecayReleaseRate[voice->SustainRelease&0x0F];
}

@ -0,0 +1,120 @@
/*
SID.h - Atmega8 MOS6581 SID Emulator
Copyright (c) 2007 Christoph Haberer, christoph(at)roboterclub-freiburg.de
Arduino Library Conversion by Mario Patino, cybernesto(at)gmail.com
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
// ensure this library description is only included once
#ifndef SID_h
#define SID_h
#include <inttypes.h>
#define NUMREGISTERS 29
#define OSCILLATORS 3
#define MAXLEVEL ( 0xFFFF / OSCILLATORS )
#define SUSTAINFACTOR ( MAXLEVEL / 15 )
#define SAMPLEFREQ 16000L
#define SAMPLERATECOUNT (F_CPU/(8*SAMPLEFREQ)-1)
#define ENVELOPE_FREQ 1000L
#define MSCOUNT (SAMPLEFREQ/ENVELOPE_FREQ-1)
// SID Registers
#define VOICE1 0
#define VOICE2 7
#define VOICE3 14
#define CONTROLREG 4
#define ATTACKDECAY 5
#define SUSTAINRELEASE 6
// SID voice control register bits
#define GATE (1<<0)
#define SYNC (1<<1)
#define RINGMOD (1<<2)
#define TEST (1<<3) // not implemented
#define TRIANGLE (1<<4)
#define SAWTOOTH (1<<5)
#define RECTANGLE (1<<6)
#define NOISE (1<<7)
// SID RES/FILT ( reg.23 )
#define FILT1 (1<<0)
#define FILT2 (1<<1)
#define FILT3 (1<<2)
// SID MODE/VOL ( reg.24 )
#define VOICE3OFF (1<<7)
typedef struct
{
uint16_t Freq; // Frequency: FreqLo/FreqHi
uint16_t PW; // PulseWidth: PW LO/HI only 12 bits used in SID
uint8_t ControlReg; // NOISE,RECTANGLE,SAWTOOTH,TRIANGLE,TEST,RINGMOD,SYNC,GATE
uint8_t AttackDecay; // bit0-3 decay, bit4-7 attack
uint8_t SustainRelease; // bit0-3 release, bit4-7 sustain
} Voice_t;
typedef struct
{
Voice_t voice[3];
uint16_t FC; // not implemented
uint8_t RES_Filt; // partly implemented
uint8_t Mode_Vol; // partly implemented
uint8_t POTX; // not implemented
uint8_t POTY; // not implemented
uint8_t OSC3_Random;// not implemented
uint8_t ENV3; // not implemented
} Blocks_t;
typedef union
{
Blocks_t block;
uint8_t sidregister[NUMREGISTERS];
} Sid_t;
typedef struct
{
uint16_t freq_coefficient;
uint8_t envelope;
uint16_t m_attack;
uint16_t m_decay;
uint16_t m_release;
uint8_t attackdecay_flag;
int16_t level_sustain;
int16_t amp;
} Oscillator_t;
// library interface description
class SID
{
// user-accessible "public" interface
public:
void begin();
uint8_t set_register(uint8_t regnum, uint8_t value);
uint8_t get_register(uint8_t regnum);
// library-accessible "private" interface
private:
uint8_t get_wavenum(Voice_t *voice);
void setfreq(Voice_t *voice,uint16_t freq);
void init_waveform(Voice_t *voice);
void setenvelope(Voice_t *voice);
};
#endif
Loading…
Cancel
Save