Merge branch 'lufa'
tmk
13 years ago
commit
fca518f90d
@ -1,22 +1,87 @@
|
||||
/*
|
||||
Copyright 2011 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
#include <avr/io.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include <util/delay.h>
|
||||
#include "bootloader.h"
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
/* Start Bootloader from Application
|
||||
* See
|
||||
* http://www.pjrc.com/teensy/jump_to_bootloader.html
|
||||
* http://www.fourwalledcubicle.com/files/LUFA/Doc/120219/html/_page__software_bootloader_start.html
|
||||
*/
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
// TODO: support usbasp
|
||||
/* Boot Section Size in bytes
|
||||
* Teensy halfKay 512
|
||||
* Atmel DFU loader 4096
|
||||
* LUFA bootloader 4096
|
||||
*/
|
||||
#ifndef BOOT_SIZE
|
||||
#define BOOT_SIZE 512
|
||||
#endif
|
||||
|
||||
#include "bootloader.h"
|
||||
#define FLASH_SIZE (FLASHEND + 1)
|
||||
#define BOOTLOADER_START (FLASHEND - BOOT_SIZE)
|
||||
|
||||
void bootloader_jump(void) {
|
||||
cli();
|
||||
|
||||
//
|
||||
//Teensy
|
||||
//
|
||||
#if defined(__AVR_AT90USB162__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
|
||||
// disable watchdog, if enabled
|
||||
// disable all peripherals
|
||||
UDCON = 1;
|
||||
USBCON = (1<<FRZCLK); // disable USB
|
||||
UCSR1B = 0;
|
||||
_delay_ms(5);
|
||||
#else
|
||||
// This makes custom USBasploader come up.
|
||||
MCUSR = 0;
|
||||
#endif
|
||||
|
||||
#if defined(__AVR_AT90USB162__)
|
||||
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0;
|
||||
TIMSK0 = 0; TIMSK1 = 0; UCSR1B = 0;
|
||||
DDRB = 0; DDRC = 0; DDRD = 0;
|
||||
PORTB = 0; PORTC = 0; PORTD = 0;
|
||||
#elif defined(__AVR_ATmega32U4__)
|
||||
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
|
||||
TIMSK0 = 0; TIMSK1 = 0; TIMSK3 = 0; TIMSK4 = 0; UCSR1B = 0; TWCR = 0;
|
||||
DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0; TWCR = 0;
|
||||
PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
|
||||
#elif defined(__AVR_AT90USB646__)
|
||||
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
|
||||
TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
|
||||
DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
|
||||
PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
|
||||
#elif defined(__AVR_AT90USB1286__)
|
||||
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
|
||||
TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
|
||||
DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
|
||||
PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
|
||||
#endif
|
||||
|
||||
|
||||
//
|
||||
//USBasp
|
||||
//
|
||||
#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P)
|
||||
// This makes custom USBasploader come up.
|
||||
MCUSR = 0;
|
||||
|
||||
// initialize ports
|
||||
PORTB = 0; PORTC= 0; PORTD = 0;
|
||||
DDRB = 0; DDRC= 0; DDRD = 0;
|
||||
|
||||
// disable interrupts
|
||||
EIMSK = 0; EECR = 0; SPCR = 0;
|
||||
ACSR = 0; SPMCSR = 0; WDTCSR = 0; PCICR = 0;
|
||||
TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0;
|
||||
ADCSRA = 0; TWCR = 0; UCSR0B = 0;
|
||||
#endif
|
||||
|
||||
|
||||
void bootloader_jump(void) __attribute__ ((weak));
|
||||
void bootloader_jump(void) {}
|
||||
// start Bootloader
|
||||
((void (*)(void))BOOTLOADER_START)();
|
||||
}
|
||||
|
||||
@ -1,56 +0,0 @@
|
||||
# Target file name (without extension).
|
||||
TARGET = hbk
|
||||
|
||||
# Directory common source filess exist
|
||||
TOP_DIR = ../..
|
||||
|
||||
# Directory keyboard dependent files exist
|
||||
TARGET_DIR = .
|
||||
|
||||
# keyboard dependent files
|
||||
SRC = main.c \
|
||||
keymap.c \
|
||||
matrix.c \
|
||||
led.c
|
||||
|
||||
CONFIG_H = config.h
|
||||
|
||||
|
||||
# MCU name, you MUST set this to match the board you are using
|
||||
# type "make clean" after changing this, so all files will be rebuilt
|
||||
#MCU = at90usb162 # Teensy 1.0
|
||||
MCU = atmega32u4 # Teensy 2.0
|
||||
#MCU = at90usb646 # Teensy++ 1.0
|
||||
#MCU = at90usb1286 # Teensy++ 2.0
|
||||
|
||||
|
||||
# Processor frequency.
|
||||
# Normally the first thing your program should do is set the clock prescaler,
|
||||
# so your program will run at the correct speed. You should also set this
|
||||
# variable to same clock speed. The _delay_ms() macro uses this, and many
|
||||
# examples use this variable to calculate timings. Do not add a "UL" here.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
#NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
|
||||
|
||||
|
||||
#---------------- Programming Options --------------------------
|
||||
#PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
|
||||
PROGRAM_CMD = /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) erase && \
|
||||
/opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) flash $(TARGET).hex && \
|
||||
/opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) start
|
||||
|
||||
|
||||
|
||||
include $(TOP_DIR)/protocol/pjrc.mk
|
||||
include $(TOP_DIR)/protocol.mk
|
||||
include $(TOP_DIR)/common.mk
|
||||
include $(TOP_DIR)/rules.mk
|
||||
@ -0,0 +1 @@
|
||||
Makefile.lufa
|
||||
@ -0,0 +1,119 @@
|
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device.
|
||||
# Please customize your programmer settings(PROGRAM_CMD)
|
||||
#
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# Target file name (without extension).
|
||||
TARGET = hbkb_lufa
|
||||
|
||||
# Directory common source filess exist
|
||||
TOP_DIR = ../..
|
||||
|
||||
# Directory keyboard dependent files exist
|
||||
TARGET_DIR = .
|
||||
|
||||
|
||||
# List C source files here. (C dependencies are automatically generated.)
|
||||
SRC += keymap.c \
|
||||
matrix.c \
|
||||
led.c
|
||||
|
||||
CONFIG_H = config.h
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
#NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
|
||||
|
||||
|
||||
# Boot Section Size in bytes
|
||||
# Teensy halfKay 512
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
OPT_DEFS += -DBOOT_SIZE=4096
|
||||
|
||||
|
||||
# Search Path
|
||||
VPATH += $(TARGET_DIR)
|
||||
VPATH += $(TOP_DIR)
|
||||
|
||||
include $(TOP_DIR)/protocol/lufa.mk
|
||||
include $(TOP_DIR)/common.mk
|
||||
include $(TOP_DIR)/rules.mk
|
||||
@ -0,0 +1,119 @@
|
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device.
|
||||
# Please customize your programmer settings(PROGRAM_CMD)
|
||||
#
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# Target file name (without extension).
|
||||
TARGET = hhkb_lufa
|
||||
|
||||
# Directory common source filess exist
|
||||
TOP_DIR = ../..
|
||||
|
||||
# Directory keyboard dependent files exist
|
||||
TARGET_DIR = .
|
||||
|
||||
|
||||
# List C source files here. (C dependencies are automatically generated.)
|
||||
SRC += keymap.c \
|
||||
matrix.c \
|
||||
led.c
|
||||
|
||||
CONFIG_H = config.h
|
||||
|
||||
|
||||
# MCU name
|
||||
MCU = at90usb1286
|
||||
#MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
#NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
|
||||
|
||||
|
||||
# Boot Section Size in bytes
|
||||
# Teensy halfKay 512
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
#OPT_DEFS += -DBOOT_SIZE=4096
|
||||
|
||||
|
||||
# Search Path
|
||||
VPATH += $(TARGET_DIR)
|
||||
VPATH += $(TOP_DIR)
|
||||
|
||||
include $(TOP_DIR)/protocol/lufa.mk
|
||||
include $(TOP_DIR)/common.mk
|
||||
include $(TOP_DIR)/rules.mk
|
||||
@ -0,0 +1,119 @@
|
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device.
|
||||
# Please customize your programmer settings(PROGRAM_CMD)
|
||||
#
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# Target file name (without extension).
|
||||
TARGET = macway_lufa
|
||||
|
||||
# Directory common source filess exist
|
||||
TOP_DIR = ../..
|
||||
|
||||
# Directory keyboard dependent files exist
|
||||
TARGET_DIR = .
|
||||
|
||||
|
||||
# List C source files here. (C dependencies are automatically generated.)
|
||||
SRC += keymap.c \
|
||||
matrix.c \
|
||||
led.c
|
||||
|
||||
CONFIG_H = config.h
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
#NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
|
||||
|
||||
|
||||
# Boot Section Size in bytes
|
||||
# Teensy halfKay 512
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
#OPT_DEFS += -DBOOT_SIZE=4096
|
||||
|
||||
|
||||
# Search Path
|
||||
VPATH += $(TARGET_DIR)
|
||||
VPATH += $(TOP_DIR)
|
||||
|
||||
include $(TOP_DIR)/protocol/lufa.mk
|
||||
include $(TOP_DIR)/common.mk
|
||||
include $(TOP_DIR)/rules.mk
|
||||
@ -0,0 +1,95 @@
|
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device.
|
||||
# Please customize your programmer settings(PROGRAM_CMD)
|
||||
#
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# Target file name (without extension).
|
||||
TARGET = macway_pjrc
|
||||
|
||||
# Directory common source filess exist
|
||||
TOP_DIR = ../..
|
||||
|
||||
# Directory keyboard dependent files exist
|
||||
TARGET_DIR = .
|
||||
|
||||
# keyboard dependent files
|
||||
SRC = keymap.c \
|
||||
matrix.c \
|
||||
led.c
|
||||
|
||||
CONFIG_H = config.h
|
||||
|
||||
|
||||
# MCU name, you MUST set this to match the board you are using
|
||||
# type "make clean" after changing this, so all files will be rebuilt
|
||||
#MCU = at90usb162 # Teensy 1.0
|
||||
MCU = atmega32u4 # Teensy 2.0
|
||||
#MCU = at90usb646 # Teensy++ 1.0
|
||||
#MCU = at90usb1286 # Teensy++ 2.0
|
||||
|
||||
|
||||
# Processor frequency.
|
||||
# Normally the first thing your program should do is set the clock prescaler,
|
||||
# so your program will run at the correct speed. You should also set this
|
||||
# variable to same clock speed. The _delay_ms() macro uses this, and many
|
||||
# examples use this variable to calculate timings. Do not add a "UL" here.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
#NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
|
||||
|
||||
|
||||
#---------------- Programming Options --------------------------
|
||||
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
|
||||
|
||||
|
||||
|
||||
# Search Path
|
||||
VPATH += $(TARGET_DIR)
|
||||
VPATH += $(TOP_DIR)
|
||||
|
||||
include $(TOP_DIR)/protocol/pjrc.mk
|
||||
include $(TOP_DIR)/common.mk
|
||||
include $(TOP_DIR)/rules.mk
|
||||
@ -0,0 +1,34 @@
|
||||
LUFA_DIR = protocol/lufa
|
||||
|
||||
# Path to the LUFA library
|
||||
LUFA_PATH = $(TOP_DIR)/protocol/lufa/LUFA-120219
|
||||
|
||||
# Create the LUFA source path variables by including the LUFA root makefile
|
||||
include $(LUFA_PATH)/LUFA/makefile
|
||||
|
||||
LUFA_SRC = $(LUFA_DIR)/lufa.c \
|
||||
$(LUFA_DIR)/descriptor.c \
|
||||
$(LUFA_SRC_USB)
|
||||
SRC += $(subst $(LUFA_PATH)/,,$(LUFA_SRC))
|
||||
|
||||
# Search Path
|
||||
VPATH += $(LUFA_PATH)
|
||||
|
||||
# Option modules
|
||||
#ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE)
|
||||
#endif
|
||||
|
||||
#ifdef EXTRAKEY_ENABLE
|
||||
#endif
|
||||
|
||||
# LUFA library compile-time options and predefined tokens
|
||||
LUFA_OPTS = -D USB_DEVICE_ONLY
|
||||
LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
|
||||
LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
|
||||
LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
|
||||
LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
|
||||
|
||||
OPT_DEFS += -DF_USB=$(F_USB)UL
|
||||
OPT_DEFS += -DARCH=ARCH_$(ARCH)
|
||||
OPT_DEFS += $(LUFA_OPTS)
|
||||
OPT_DEFS += -DHOST_LUFA
|
||||
@ -0,0 +1,558 @@
|
||||
/*
|
||||
* Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
* This file is based on:
|
||||
* LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse
|
||||
* LUFA-120219/Demos/Device/Lowlevel/GenericHID
|
||||
*/
|
||||
|
||||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2012.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.lufa-lib.org
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com)
|
||||
|
||||
Permission to use, copy, modify, distribute, and sell this
|
||||
software and its documentation for any purpose is hereby granted
|
||||
without fee, provided that the above copyright notice appear in
|
||||
all copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaim all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
#include "util.h"
|
||||
#include "report.h"
|
||||
#include "descriptor.h"
|
||||
|
||||
|
||||
/*******************************************************************************
|
||||
* HID Report Descriptors
|
||||
******************************************************************************/
|
||||
const USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
|
||||
{
|
||||
HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
|
||||
HID_RI_USAGE(8, 0x06), /* Keyboard */
|
||||
HID_RI_COLLECTION(8, 0x01), /* Application */
|
||||
HID_RI_USAGE_PAGE(8, 0x07), /* Key Codes */
|
||||
HID_RI_USAGE_MINIMUM(8, 0xE0), /* Keyboard Left Control */
|
||||
HID_RI_USAGE_MAXIMUM(8, 0xE7), /* Keyboard Right GUI */
|
||||
HID_RI_LOGICAL_MINIMUM(8, 0x00),
|
||||
HID_RI_LOGICAL_MAXIMUM(8, 0x01),
|
||||
HID_RI_REPORT_COUNT(8, 0x08),
|
||||
HID_RI_REPORT_SIZE(8, 0x01),
|
||||
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
|
||||
HID_RI_REPORT_COUNT(8, 0x01),
|
||||
HID_RI_REPORT_SIZE(8, 0x08),
|
||||
HID_RI_INPUT(8, HID_IOF_CONSTANT),
|
||||
HID_RI_USAGE_PAGE(8, 0x08), /* LEDs */
|
||||
HID_RI_USAGE_MINIMUM(8, 0x01), /* Num Lock */
|
||||
HID_RI_USAGE_MAXIMUM(8, 0x05), /* Kana */
|
||||
HID_RI_REPORT_COUNT(8, 0x05),
|
||||
HID_RI_REPORT_SIZE(8, 0x01),
|
||||
HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE),
|
||||
HID_RI_REPORT_COUNT(8, 0x01),
|
||||
HID_RI_REPORT_SIZE(8, 0x03),
|
||||
HID_RI_OUTPUT(8, HID_IOF_CONSTANT),
|
||||
HID_RI_USAGE_PAGE(8, 0x07), /* Keyboard */
|
||||
HID_RI_USAGE_MINIMUM(8, 0x00), /* Reserved (no event indicated) */
|
||||
HID_RI_USAGE_MAXIMUM(8, 0xFF), /* Keyboard Application */
|
||||
HID_RI_LOGICAL_MINIMUM(8, 0x00),
|
||||
HID_RI_LOGICAL_MAXIMUM(8, 0xFF),
|
||||
HID_RI_REPORT_COUNT(8, 0x06),
|
||||
HID_RI_REPORT_SIZE(8, 0x08),
|
||||
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_ARRAY | HID_IOF_ABSOLUTE),
|
||||
HID_RI_END_COLLECTION(0),
|
||||
};
|
||||
|
||||
const USB_Descriptor_HIDReport_Datatype_t PROGMEM MouseReport[] =
|
||||
{
|
||||
HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
|
||||
HID_RI_USAGE(8, 0x02), /* Mouse */
|
||||
HID_RI_COLLECTION(8, 0x01), /* Application */
|
||||
HID_RI_USAGE(8, 0x01), /* Pointer */
|
||||
HID_RI_COLLECTION(8, 0x00), /* Physical */
|
||||
|
||||
HID_RI_USAGE_PAGE(8, 0x09), /* Button */
|
||||
HID_RI_USAGE_MINIMUM(8, 0x01), /* Button 1 */
|
||||
HID_RI_USAGE_MAXIMUM(8, 0x05), /* Button 5 */
|
||||
HID_RI_LOGICAL_MINIMUM(8, 0x00),
|
||||
HID_RI_LOGICAL_MAXIMUM(8, 0x01),
|
||||
HID_RI_REPORT_COUNT(8, 0x05),
|
||||
HID_RI_REPORT_SIZE(8, 0x01),
|
||||
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
|
||||
HID_RI_REPORT_COUNT(8, 0x01),
|
||||
HID_RI_REPORT_SIZE(8, 0x03),
|
||||
HID_RI_INPUT(8, HID_IOF_CONSTANT),
|
||||
|
||||
HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
|
||||
HID_RI_USAGE(8, 0x30), /* Usage X */
|
||||
HID_RI_USAGE(8, 0x31), /* Usage Y */
|
||||
HID_RI_LOGICAL_MINIMUM(8, -127),
|
||||
HID_RI_LOGICAL_MAXIMUM(8, 127),
|
||||
HID_RI_REPORT_COUNT(8, 0x02),
|
||||
HID_RI_REPORT_SIZE(8, 0x08),
|
||||
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_RELATIVE),
|
||||
|
||||
HID_RI_USAGE(8, 0x38), /* Wheel */
|
||||
HID_RI_LOGICAL_MINIMUM(8, -127),
|
||||
HID_RI_LOGICAL_MAXIMUM(8, 127),
|
||||
HID_RI_REPORT_COUNT(8, 0x01),
|
||||
HID_RI_REPORT_SIZE(8, 0x08),
|
||||
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_RELATIVE),
|
||||
|
||||
HID_RI_USAGE_PAGE(8, 0x0C), /* Consumer */
|
||||
HID_RI_USAGE(16, 0x0238), /* AC Pan (Horizontal wheel) */
|
||||
HID_RI_LOGICAL_MINIMUM(8, -127),
|
||||
HID_RI_LOGICAL_MAXIMUM(8, 127),
|
||||
HID_RI_REPORT_COUNT(8, 0x01),
|
||||
HID_RI_REPORT_SIZE(8, 0x08),
|
||||
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_RELATIVE),
|
||||
|
||||
HID_RI_END_COLLECTION(0),
|
||||
HID_RI_END_COLLECTION(0),
|
||||
};
|
||||
|
||||
const USB_Descriptor_HIDReport_Datatype_t PROGMEM ConsoleReport[] =
|
||||
{
|
||||
HID_RI_USAGE_PAGE(16, 0xFF31), /* Vendor Page(PJRC Teensy compatible) */
|
||||
HID_RI_USAGE(8, 0x74), /* Vendor Usage(PJRC Teensy compatible) */
|
||||
HID_RI_COLLECTION(8, 0x01), /* Application */
|
||||
HID_RI_USAGE(8, 0x75), /* Vendor Usage 0x75 */
|
||||
HID_RI_LOGICAL_MINIMUM(8, 0x00),
|
||||
HID_RI_LOGICAL_MAXIMUM(8, 0xFF),
|
||||
HID_RI_REPORT_COUNT(8, CONSOLE_EPSIZE),
|
||||
HID_RI_REPORT_SIZE(8, 0x08),
|
||||
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
|
||||
HID_RI_USAGE(8, 0x76), /* Vendor Usage 0x76 */
|
||||
HID_RI_LOGICAL_MINIMUM(8, 0x00),
|
||||
HID_RI_LOGICAL_MAXIMUM(8, 0xFF),
|
||||
HID_RI_REPORT_COUNT(8, CONSOLE_EPSIZE),
|
||||
HID_RI_REPORT_SIZE(8, 0x08),
|
||||
HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE),
|
||||
HID_RI_END_COLLECTION(0),
|
||||
};
|
||||
|
||||
#ifdef EXTRAKEY_ENABLE
|
||||
const USB_Descriptor_HIDReport_Datatype_t PROGMEM ExtraReport[] =
|
||||
{
|
||||
HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
|
||||
HID_RI_USAGE(8, 0x80), /* System Control */
|
||||
HID_RI_COLLECTION(8, 0x01), /* Application */
|
||||
HID_RI_REPORT_ID(8, REPORT_ID_SYSTEM),
|
||||
HID_RI_LOGICAL_MINIMUM(16, 0x0081),
|
||||
HID_RI_LOGICAL_MAXIMUM(16, 0x00B7),
|
||||
HID_RI_USAGE_MINIMUM(16, 0x0081), /* System Power Down */
|
||||
HID_RI_USAGE_MAXIMUM(16, 0x00B7), /* System Display LCD Autoscale */
|
||||
HID_RI_REPORT_SIZE(8, 16),
|
||||
HID_RI_REPORT_COUNT(8, 1),
|
||||
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_ARRAY | HID_IOF_ABSOLUTE),
|
||||
HID_RI_END_COLLECTION(0),
|
||||
|
||||
HID_RI_USAGE_PAGE(8, 0x0C), /* Consumer */
|
||||
HID_RI_USAGE(8, 0x01), /* Consumer Control */
|
||||
HID_RI_COLLECTION(8, 0x01), /* Application */
|
||||
HID_RI_REPORT_ID(8, REPORT_ID_CONSUMER),
|
||||
HID_RI_LOGICAL_MINIMUM(16, 0x0010),
|
||||
HID_RI_LOGICAL_MAXIMUM(16, 0x029C),
|
||||
HID_RI_USAGE_MINIMUM(16, 0x0010), /* +10 */
|
||||
HID_RI_USAGE_MAXIMUM(16, 0x029C), /* AC Distribute Vertically */
|
||||
HID_RI_REPORT_SIZE(8, 16),
|
||||
HID_RI_REPORT_COUNT(8, 1),
|
||||
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_ARRAY | HID_IOF_ABSOLUTE),
|
||||
HID_RI_END_COLLECTION(0),
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef NKRO_ENABLE
|
||||
const USB_Descriptor_HIDReport_Datatype_t PROGMEM NKROReport[] =
|
||||
{
|
||||
HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
|
||||
HID_RI_USAGE(8, 0x06), /* Keyboard */
|
||||
HID_RI_COLLECTION(8, 0x01), /* Application */
|
||||
HID_RI_USAGE_PAGE(8, 0x07), /* Key Codes */
|
||||
HID_RI_USAGE_MINIMUM(8, 0xE0), /* Keyboard Left Control */
|
||||
HID_RI_USAGE_MAXIMUM(8, 0xE7), /* Keyboard Right GUI */
|
||||
HID_RI_LOGICAL_MINIMUM(8, 0x00),
|
||||
HID_RI_LOGICAL_MAXIMUM(8, 0x01),
|
||||
HID_RI_REPORT_COUNT(8, 0x08),
|
||||
HID_RI_REPORT_SIZE(8, 0x01),
|
||||
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
|
||||
|
||||
HID_RI_USAGE_PAGE(8, 0x08), /* LEDs */
|
||||
HID_RI_USAGE_MINIMUM(8, 0x01), /* Num Lock */
|
||||
HID_RI_USAGE_MAXIMUM(8, 0x05), /* Kana */
|
||||
HID_RI_REPORT_COUNT(8, 0x05),
|
||||
HID_RI_REPORT_SIZE(8, 0x01),
|
||||
HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE),
|
||||
HID_RI_REPORT_COUNT(8, 0x01),
|
||||
HID_RI_REPORT_SIZE(8, 0x03),
|
||||
HID_RI_OUTPUT(8, HID_IOF_CONSTANT),
|
||||
|
||||
HID_RI_USAGE_PAGE(8, 0x07), /* Key Codes */
|
||||
HID_RI_USAGE_MINIMUM(8, 0x00), /* Keyboard 0 */
|
||||
HID_RI_USAGE_MAXIMUM(8, NKRO_SIZE*8-1), /* Keyboard Right GUI */
|
||||
HID_RI_LOGICAL_MINIMUM(8, 0x00),
|
||||
HID_RI_LOGICAL_MAXIMUM(8, 0x01),
|
||||
HID_RI_REPORT_COUNT(8, NKRO_SIZE*8),
|
||||
HID_RI_REPORT_SIZE(8, 0x01),
|
||||
};
|
||||
#endif
|
||||
|
||||
/*******************************************************************************
|
||||
* Device Descriptors
|
||||
******************************************************************************/
|
||||
const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
|
||||
{
|
||||
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
|
||||
|
||||
.USBSpecification = VERSION_BCD(01.10),
|
||||
.Class = USB_CSCP_NoDeviceClass,
|
||||
.SubClass = USB_CSCP_NoDeviceSubclass,
|
||||
.Protocol = USB_CSCP_NoDeviceProtocol,
|
||||
|
||||
.Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE,
|
||||
|
||||
.VendorID = VENDOR_ID,
|
||||
.ProductID = PRODUCT_ID,
|
||||
.ReleaseNumber = DEVICE_VER,
|
||||
|
||||
.ManufacturerStrIndex = 0x01,
|
||||
.ProductStrIndex = 0x02,
|
||||
.SerialNumStrIndex = NO_DESCRIPTOR,
|
||||
|
||||
.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
|
||||
};
|
||||
|
||||
/*******************************************************************************
|
||||
* Configuration Descriptors
|
||||
******************************************************************************/
|
||||
const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
|
||||
{
|
||||
.Config =
|
||||
{
|
||||
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
|
||||
|
||||
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
|
||||
.TotalInterfaces = TOTAL_INTERFACES,
|
||||
|
||||
.ConfigurationNumber = 1,
|
||||
.ConfigurationStrIndex = NO_DESCRIPTOR,
|
||||
|
||||
.ConfigAttributes = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_REMOTEWAKEUP),
|
||||
|
||||
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
|
||||
},
|
||||
|
||||
/*
|
||||
* Keyboard
|
||||
*/
|
||||
.Keyboard_Interface =
|
||||
{
|
||||
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
|
||||
|
||||
.InterfaceNumber = KEYBOARD_INTERFACE,
|
||||
.AlternateSetting = 0x00,
|
||||
|
||||
.TotalEndpoints = 1,
|
||||
|
||||
.Class = HID_CSCP_HIDClass,
|
||||
.SubClass = HID_CSCP_BootSubclass,
|
||||
.Protocol = HID_CSCP_KeyboardBootProtocol,
|
||||
|
||||
.InterfaceStrIndex = NO_DESCRIPTOR
|
||||
},
|
||||
|
||||
.Keyboard_HID =
|
||||
{
|
||||
.Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
|
||||
|
||||
.HIDSpec = VERSION_BCD(01.11),
|
||||
.CountryCode = 0x00,
|
||||
.TotalReportDescriptors = 1,
|
||||
.HIDReportType = HID_DTYPE_Report,
|
||||
.HIDReportLength = sizeof(KeyboardReport)
|
||||
},
|
||||
|
||||
.Keyboard_INEndpoint =
|
||||
{
|
||||
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
|
||||
|
||||
.EndpointAddress = (ENDPOINT_DIR_IN | KEYBOARD_IN_EPNUM),
|
||||
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
|
||||
.EndpointSize = KEYBOARD_EPSIZE,
|
||||
.PollingIntervalMS = 0x01
|
||||
},
|
||||
|
||||
/*
|
||||
* Mouse
|
||||
*/
|
||||
#ifdef MOUSE_ENABLE
|
||||
.Mouse_Interface =
|
||||
{
|
||||
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
|
||||
|
||||
.InterfaceNumber = MOUSE_INTERFACE,
|
||||
.AlternateSetting = 0x00,
|
||||
|
||||
.TotalEndpoints = 1,
|
||||
|
||||
.Class = HID_CSCP_HIDClass,
|
||||
.SubClass = HID_CSCP_BootSubclass,
|
||||
.Protocol = HID_CSCP_MouseBootProtocol,
|
||||
|
||||
.InterfaceStrIndex = NO_DESCRIPTOR
|
||||
},
|
||||
|
||||
.Mouse_HID =
|
||||
{
|
||||
.Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
|
||||
|
||||
.HIDSpec = VERSION_BCD(01.11),
|
||||
.CountryCode = 0x00,
|
||||
.TotalReportDescriptors = 1,
|
||||
.HIDReportType = HID_DTYPE_Report,
|
||||
.HIDReportLength = sizeof(MouseReport)
|
||||
},
|
||||
|
||||
.Mouse_INEndpoint =
|
||||
{
|
||||
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
|
||||
|
||||
.EndpointAddress = (ENDPOINT_DIR_IN | MOUSE_IN_EPNUM),
|
||||
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
|
||||
.EndpointSize = MOUSE_EPSIZE,
|
||||
.PollingIntervalMS = 0x01
|
||||
},
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Console
|
||||
*/
|
||||
.Console_Interface =
|
||||
{
|
||||
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
|
||||
|
||||
.InterfaceNumber = CONSOLE_INTERFACE,
|
||||
.AlternateSetting = 0x00,
|
||||
|
||||
.TotalEndpoints = 2,
|
||||
|
||||
.Class = HID_CSCP_HIDClass,
|
||||
.SubClass = HID_CSCP_NonBootSubclass,
|
||||
.Protocol = HID_CSCP_NonBootProtocol,
|
||||
|
||||
.InterfaceStrIndex = NO_DESCRIPTOR
|
||||
},
|
||||
|
||||
.Console_HID =
|
||||
{
|
||||
.Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
|
||||
|
||||
.HIDSpec = VERSION_BCD(01.11),
|
||||
.CountryCode = 0x00,
|
||||
.TotalReportDescriptors = 1,
|
||||
.HIDReportType = HID_DTYPE_Report,
|
||||
.HIDReportLength = sizeof(ConsoleReport)
|
||||
},
|
||||
|
||||
.Console_INEndpoint =
|
||||
{
|
||||
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
|
||||
|
||||
.EndpointAddress = (ENDPOINT_DIR_IN | CONSOLE_IN_EPNUM),
|
||||
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
|
||||
.EndpointSize = CONSOLE_EPSIZE,
|
||||
.PollingIntervalMS = 0x01
|
||||
},
|
||||
|
||||
.Console_OUTEndpoint =
|
||||
{
|
||||
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
|
||||
|
||||
.EndpointAddress = (ENDPOINT_DIR_OUT | CONSOLE_OUT_EPNUM),
|
||||
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
|
||||
.EndpointSize = CONSOLE_EPSIZE,
|
||||
.PollingIntervalMS = 0x01
|
||||
},
|
||||
|
||||
/*
|
||||
* Extra
|
||||
*/
|
||||
#ifdef EXTRAKEY_ENABLE
|
||||
.Extra_Interface =
|
||||
{
|
||||
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
|
||||
|
||||
.InterfaceNumber = EXTRA_INTERFACE,
|
||||
.AlternateSetting = 0x00,
|
||||
|
||||
.TotalEndpoints = 1,
|
||||
|
||||
.Class = HID_CSCP_HIDClass,
|
||||
.SubClass = HID_CSCP_NonBootSubclass,
|
||||
.Protocol = HID_CSCP_NonBootProtocol,
|
||||
|
||||
.InterfaceStrIndex = NO_DESCRIPTOR
|
||||
},
|
||||
|
||||
.Extra_HID =
|
||||
{
|
||||
.Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
|
||||
|
||||
.HIDSpec = VERSION_BCD(01.11),
|
||||
.CountryCode = 0x00,
|
||||
.TotalReportDescriptors = 1,
|
||||
.HIDReportType = HID_DTYPE_Report,
|
||||
.HIDReportLength = sizeof(ExtraReport)
|
||||
},
|
||||
|
||||
.Extra_INEndpoint =
|
||||
{
|
||||
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
|
||||
|
||||
.EndpointAddress = (ENDPOINT_DIR_IN | EXTRA_IN_EPNUM),
|
||||
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
|
||||
.EndpointSize = EXTRA_EPSIZE,
|
||||
.PollingIntervalMS = 0x01
|
||||
},
|
||||
#endif
|
||||
};
|
||||
|
||||
|
||||
/*******************************************************************************
|
||||
* String Descriptors
|
||||
******************************************************************************/
|
||||
const USB_Descriptor_String_t PROGMEM LanguageString =
|
||||
{
|
||||
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
|
||||
|
||||
.UnicodeString = {LANGUAGE_ID_ENG}
|
||||
};
|
||||
|
||||
const USB_Descriptor_String_t PROGMEM ManufacturerString =
|
||||
{
|
||||
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
|
||||
|
||||
.UnicodeString = LSTR(MANUFACTURER)
|
||||
};
|
||||
|
||||
const USB_Descriptor_String_t PROGMEM ProductString =
|
||||
{
|
||||
.Header = {.Size = USB_STRING_LEN(28), .Type = DTYPE_String},
|
||||
|
||||
.UnicodeString = LSTR(PRODUCT)
|
||||
};
|
||||
|
||||
|
||||
/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
|
||||
* documentation) by the application code so that the address and size of a requested descriptor can be given
|
||||
* to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
|
||||
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
|
||||
* USB host.
|
||||
*/
|
||||
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
|
||||
const uint8_t wIndex,
|
||||
const void** const DescriptorAddress)
|
||||
{
|
||||
const uint8_t DescriptorType = (wValue >> 8);
|
||||
const uint8_t DescriptorIndex = (wValue & 0xFF);
|
||||
|
||||
const void* Address = NULL;
|
||||
uint16_t Size = NO_DESCRIPTOR;
|
||||
|
||||
switch (DescriptorType)
|
||||
{
|
||||
case DTYPE_Device:
|
||||
Address = &DeviceDescriptor;
|
||||
Size = sizeof(USB_Descriptor_Device_t);
|
||||
break;
|
||||
case DTYPE_Configuration:
|
||||
Address = &ConfigurationDescriptor;
|
||||
Size = sizeof(USB_Descriptor_Configuration_t);
|
||||
break;
|
||||
case DTYPE_String:
|
||||
switch (DescriptorIndex )
|
||||
{
|
||||
case 0x00:
|
||||
Address = &LanguageString;
|
||||
Size = pgm_read_byte(&LanguageString.Header.Size);
|
||||
break;
|
||||
case 0x01:
|
||||
Address = &ManufacturerString;
|
||||
Size = pgm_read_byte(&ManufacturerString.Header.Size);
|
||||
break;
|
||||
case 0x02:
|
||||
Address = &ProductString;
|
||||
Size = pgm_read_byte(&ProductString.Header.Size);
|
||||
break;
|
||||
}
|
||||
break;
|
||||
case HID_DTYPE_HID:
|
||||
switch (wIndex) {
|
||||
case KEYBOARD_INTERFACE:
|
||||
Address = &ConfigurationDescriptor.Keyboard_HID;
|
||||
Size = sizeof(USB_HID_Descriptor_HID_t);
|
||||
break;
|
||||
#ifdef MOUSE_ENABLE
|
||||
case MOUSE_INTERFACE:
|
||||
Address = &ConfigurationDescriptor.Mouse_HID;
|
||||
Size = sizeof(USB_HID_Descriptor_HID_t);
|
||||
break;
|
||||
#endif
|
||||
case CONSOLE_INTERFACE:
|
||||
Address = &ConfigurationDescriptor.Console_HID;
|
||||
Size = sizeof(USB_HID_Descriptor_HID_t);
|
||||
break;
|
||||
#ifdef EXTRAKEY_ENABLE
|
||||
case EXTRA_INTERFACE:
|
||||
Address = &ConfigurationDescriptor.Extra_HID;
|
||||
Size = sizeof(USB_HID_Descriptor_HID_t);
|
||||
break;
|
||||
#endif
|
||||
}
|
||||
break;
|
||||
case HID_DTYPE_Report:
|
||||
switch (wIndex) {
|
||||
case KEYBOARD_INTERFACE:
|
||||
Address = &KeyboardReport;
|
||||
Size = sizeof(KeyboardReport);
|
||||
break;
|
||||
#ifdef MOUSE_ENABLE
|
||||
case MOUSE_INTERFACE:
|
||||
Address = &MouseReport;
|
||||
Size = sizeof(MouseReport);
|
||||
break;
|
||||
#endif
|
||||
case CONSOLE_INTERFACE:
|
||||
Address = &ConsoleReport;
|
||||
Size = sizeof(ConsoleReport);
|
||||
break;
|
||||
#ifdef EXTRAKEY_ENABLE
|
||||
case EXTRA_INTERFACE:
|
||||
Address = &ExtraReport;
|
||||
Size = sizeof(ExtraReport);
|
||||
break;
|
||||
#endif
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
*DescriptorAddress = Address;
|
||||
return Size;
|
||||
}
|
||||
@ -0,0 +1,122 @@
|
||||
/*
|
||||
* Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
* This file is based on:
|
||||
* LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse
|
||||
* LUFA-120219/Demos/Device/Lowlevel/GenericHID
|
||||
*/
|
||||
|
||||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2012.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.lufa-lib.org
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com)
|
||||
|
||||
Permission to use, copy, modify, distribute, and sell this
|
||||
software and its documentation for any purpose is hereby granted
|
||||
without fee, provided that the above copyright notice appear in
|
||||
all copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaim all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
/** \file
|
||||
*
|
||||
* Header file for Descriptors.c.
|
||||
*/
|
||||
|
||||
#ifndef _DESCRIPTORS_H_
|
||||
#define _DESCRIPTORS_H_
|
||||
|
||||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <avr/pgmspace.h>
|
||||
|
||||
|
||||
typedef struct
|
||||
{
|
||||
USB_Descriptor_Configuration_Header_t Config;
|
||||
|
||||
// Keyboard HID Interface
|
||||
USB_Descriptor_Interface_t Keyboard_Interface;
|
||||
USB_HID_Descriptor_HID_t Keyboard_HID;
|
||||
USB_Descriptor_Endpoint_t Keyboard_INEndpoint;
|
||||
|
||||
// Mouse HID Interface
|
||||
#ifdef MOUSE_ENABLE
|
||||
USB_Descriptor_Interface_t Mouse_Interface;
|
||||
USB_HID_Descriptor_HID_t Mouse_HID;
|
||||
USB_Descriptor_Endpoint_t Mouse_INEndpoint;
|
||||
#endif
|
||||
|
||||
// Console HID Interface
|
||||
USB_Descriptor_Interface_t Console_Interface;
|
||||
USB_HID_Descriptor_HID_t Console_HID;
|
||||
USB_Descriptor_Endpoint_t Console_INEndpoint;
|
||||
USB_Descriptor_Endpoint_t Console_OUTEndpoint;
|
||||
|
||||
// Extra HID Interface
|
||||
#ifdef EXTRAKEY_ENABLE
|
||||
USB_Descriptor_Interface_t Extra_Interface;
|
||||
USB_HID_Descriptor_HID_t Extra_HID;
|
||||
USB_Descriptor_Endpoint_t Extra_INEndpoint;
|
||||
#endif
|
||||
} USB_Descriptor_Configuration_t;
|
||||
|
||||
|
||||
/* index of interface */
|
||||
#define KEYBOARD_INTERFACE 0
|
||||
|
||||
#ifdef MOUSE_ENABLE
|
||||
# define MOUSE_INTERFACE (KEYBOARD_INTERFACE + 1)
|
||||
#else
|
||||
# define MOUSE_INTERFACE KEYBOARD_INTERFACE
|
||||
#endif
|
||||
|
||||
#ifdef EXTRAKEY_ENABLE
|
||||
# define EXTRA_INTERFACE (MOUSE_INTERFACE + 1)
|
||||
#else
|
||||
# define EXTRA_INTERFACE MOUSE_INTERFACE
|
||||
#endif
|
||||
|
||||
#define CONSOLE_INTERFACE (EXTRA_INTERFACE + 1)
|
||||
|
||||
|
||||
/* nubmer of interfaces */
|
||||
#define TOTAL_INTERFACES (CONSOLE_INTERFACE + 1)
|
||||
|
||||
|
||||
// Endopoint number and size
|
||||
#define KEYBOARD_IN_EPNUM 1
|
||||
#define MOUSE_IN_EPNUM 2
|
||||
#define CONSOLE_IN_EPNUM 3
|
||||
#define CONSOLE_OUT_EPNUM 4
|
||||
#define EXTRA_IN_EPNUM 5
|
||||
|
||||
#define KEYBOARD_EPSIZE 8
|
||||
#define MOUSE_EPSIZE 8
|
||||
#define CONSOLE_EPSIZE 8
|
||||
#define EXTRA_EPSIZE 8
|
||||
|
||||
|
||||
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
|
||||
const uint8_t wIndex,
|
||||
const void** const DescriptorAddress)
|
||||
ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,408 @@
|
||||
/*
|
||||
* Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
* This file is based on:
|
||||
* LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse
|
||||
* LUFA-120219/Demos/Device/Lowlevel/GenericHID
|
||||
*/
|
||||
|
||||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2012.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.lufa-lib.org
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com)
|
||||
|
||||
Permission to use, copy, modify, distribute, and sell this
|
||||
software and its documentation for any purpose is hereby granted
|
||||
without fee, provided that the above copyright notice appear in
|
||||
all copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaim all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
#include "report.h"
|
||||
#include "host.h"
|
||||
#include "host_driver.h"
|
||||
#include "keyboard.h"
|
||||
#include "sendchar.h"
|
||||
#include "debug.h"
|
||||
|
||||
#include "descriptor.h"
|
||||
#include "lufa.h"
|
||||
|
||||
static uint8_t idle_duration = 0;
|
||||
static uint8_t protocol_report = 1;
|
||||
static uint8_t keyboard_led_stats = 0;
|
||||
|
||||
static report_keyboard_t keyboard_report_sent;
|
||||
|
||||
|
||||
/* Host driver */
|
||||
static uint8_t keyboard_leds(void);
|
||||
static void send_keyboard(report_keyboard_t *report);
|
||||
static void send_mouse(report_mouse_t *report);
|
||||
static void send_system(uint16_t data);
|
||||
static void send_consumer(uint16_t data);
|
||||
static host_driver_t lufa_driver = {
|
||||
keyboard_leds,
|
||||
send_keyboard,
|
||||
send_mouse,
|
||||
send_system,
|
||||
send_consumer
|
||||
};
|
||||
|
||||
|
||||
static void SetupHardware(void);
|
||||
static void Console_HID_Task(void);
|
||||
|
||||
int main(void)
|
||||
{
|
||||
SetupHardware();
|
||||
sei();
|
||||
|
||||
print_enable = true;
|
||||
debug_enable = true;
|
||||
debug_matrix = true;
|
||||
debug_keyboard = true;
|
||||
debug_mouse = true;
|
||||
|
||||
// TODO: can't print here
|
||||
debug("LUFA init\n");
|
||||
|
||||
keyboard_init();
|
||||
host_set_driver(&lufa_driver);
|
||||
while (1) {
|
||||
keyboard_proc();
|
||||
|
||||
Console_HID_Task();
|
||||
USB_USBTask();
|
||||
}
|
||||
}
|
||||
|
||||
void SetupHardware(void)
|
||||
{
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
|
||||
USB_Init();
|
||||
}
|
||||
|
||||
static void Console_HID_Task(void)
|
||||
{
|
||||
/* Device must be connected and configured for the task to run */
|
||||
if (USB_DeviceState != DEVICE_STATE_Configured)
|
||||
return;
|
||||
|
||||
// TODO: impl receivechar()/recvchar()
|
||||
Endpoint_SelectEndpoint(CONSOLE_OUT_EPNUM);
|
||||
|
||||
/* Check to see if a packet has been sent from the host */
|
||||
if (Endpoint_IsOUTReceived())
|
||||
{
|
||||
/* Check to see if the packet contains data */
|
||||
if (Endpoint_IsReadWriteAllowed())
|
||||
{
|
||||
/* Create a temporary buffer to hold the read in report from the host */
|
||||
uint8_t ConsoleData[CONSOLE_EPSIZE];
|
||||
|
||||
/* Read Console Report Data */
|
||||
Endpoint_Read_Stream_LE(&ConsoleData, sizeof(ConsoleData), NULL);
|
||||
|
||||
/* Process Console Report Data */
|
||||
//ProcessConsoleHIDReport(ConsoleData);
|
||||
}
|
||||
|
||||
/* Finalize the stream transfer to send the last packet */
|
||||
Endpoint_ClearOUT();
|
||||
}
|
||||
|
||||
/* IN packet */
|
||||
Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM);
|
||||
// send IN packet
|
||||
if (Endpoint_IsINReady())
|
||||
Endpoint_ClearIN();
|
||||
}
|
||||
|
||||
|
||||
/*******************************************************************************
|
||||
* USB Events
|
||||
******************************************************************************/
|
||||
/** Event handler for the USB_Connect event. */
|
||||
void EVENT_USB_Device_Connect(void)
|
||||
{
|
||||
}
|
||||
|
||||
/** Event handler for the USB_Disconnect event. */
|
||||
void EVENT_USB_Device_Disconnect(void)
|
||||
{
|
||||
}
|
||||
|
||||
/** Event handler for the USB_ConfigurationChanged event.
|
||||
* This is fired when the host sets the current configuration of the USB device after enumeration.
|
||||
*/
|
||||
void EVENT_USB_Device_ConfigurationChanged(void)
|
||||
{
|
||||
bool ConfigSuccess = true;
|
||||
|
||||
/* Setup Keyboard HID Report Endpoints */
|
||||
ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
|
||||
KEYBOARD_EPSIZE, ENDPOINT_BANK_SINGLE);
|
||||
|
||||
#ifdef MOUSE_ENABLE
|
||||
/* Setup Mouse HID Report Endpoint */
|
||||
ConfigSuccess &= Endpoint_ConfigureEndpoint(MOUSE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
|
||||
MOUSE_EPSIZE, ENDPOINT_BANK_SINGLE);
|
||||
#endif
|
||||
|
||||
#ifdef EXTRAKEY_ENABLE
|
||||
/* Setup Extra HID Report Endpoint */
|
||||
ConfigSuccess &= Endpoint_ConfigureEndpoint(EXTRA_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
|
||||
EXTRA_EPSIZE, ENDPOINT_BANK_SINGLE);
|
||||
#endif
|
||||
|
||||
/* Setup Console HID Report Endpoints */
|
||||
ConfigSuccess &= Endpoint_ConfigureEndpoint(CONSOLE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
|
||||
CONSOLE_EPSIZE, ENDPOINT_BANK_SINGLE);
|
||||
ConfigSuccess &= Endpoint_ConfigureEndpoint(CONSOLE_OUT_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_OUT,
|
||||
CONSOLE_EPSIZE, ENDPOINT_BANK_SINGLE);
|
||||
}
|
||||
|
||||
/*
|
||||
Appendix G: HID Request Support Requirements
|
||||
|
||||
The following table enumerates the requests that need to be supported by various types of HID class devices.
|
||||
|
||||
Device type GetReport SetReport GetIdle SetIdle GetProtocol SetProtocol
|
||||
------------------------------------------------------------------------------------------
|
||||
Boot Mouse Required Optional Optional Optional Required Required
|
||||
Non-Boot Mouse Required Optional Optional Optional Optional Optional
|
||||
Boot Keyboard Required Optional Required Required Required Required
|
||||
Non-Boot Keybrd Required Optional Required Required Optional Optional
|
||||
Other Device Required Optional Optional Optional Optional Optional
|
||||
*/
|
||||
/** Event handler for the USB_ControlRequest event.
|
||||
* This is fired before passing along unhandled control requests to the library for processing internally.
|
||||
*/
|
||||
void EVENT_USB_Device_ControlRequest(void)
|
||||
{
|
||||
uint8_t* ReportData = NULL;
|
||||
uint8_t ReportSize = 0;
|
||||
|
||||
/* Handle HID Class specific requests */
|
||||
switch (USB_ControlRequest.bRequest)
|
||||
{
|
||||
case HID_REQ_GetReport:
|
||||
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
|
||||
{
|
||||
Endpoint_ClearSETUP();
|
||||
|
||||
// Interface
|
||||
switch (USB_ControlRequest.wIndex) {
|
||||
case KEYBOARD_INTERFACE:
|
||||
// TODO: test/check
|
||||
ReportData = (uint8_t*)&keyboard_report_sent;
|
||||
ReportSize = sizeof(keyboard_report_sent);
|
||||
break;
|
||||
}
|
||||
|
||||
/* Write the report data to the control endpoint */
|
||||
Endpoint_Write_Control_Stream_LE(ReportData, ReportSize);
|
||||
Endpoint_ClearOUT();
|
||||
}
|
||||
|
||||
break;
|
||||
case HID_REQ_SetReport:
|
||||
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
|
||||
{
|
||||
|
||||
// Interface
|
||||
switch (USB_ControlRequest.wIndex) {
|
||||
case KEYBOARD_INTERFACE:
|
||||
Endpoint_ClearSETUP();
|
||||
|
||||
while (!(Endpoint_IsOUTReceived())) {
|
||||
if (USB_DeviceState == DEVICE_STATE_Unattached)
|
||||
return;
|
||||
}
|
||||
keyboard_led_stats = Endpoint_Read_8();
|
||||
|
||||
Endpoint_ClearOUT();
|
||||
Endpoint_ClearStatusStage();
|
||||
break;
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
break;
|
||||
|
||||
case HID_REQ_GetProtocol:
|
||||
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
|
||||
{
|
||||
Endpoint_ClearSETUP();
|
||||
while (!(Endpoint_IsINReady()));
|
||||
Endpoint_Write_8(protocol_report);
|
||||
Endpoint_ClearIN();
|
||||
Endpoint_ClearStatusStage();
|
||||
}
|
||||
|
||||
break;
|
||||
case HID_REQ_SetProtocol:
|
||||
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
|
||||
{
|
||||
Endpoint_ClearSETUP();
|
||||
Endpoint_ClearStatusStage();
|
||||
|
||||
protocol_report = ((USB_ControlRequest.wValue & 0xFF) != 0x00);
|
||||
}
|
||||
|
||||
break;
|
||||
case HID_REQ_SetIdle:
|
||||
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
|
||||
{
|
||||
Endpoint_ClearSETUP();
|
||||
Endpoint_ClearStatusStage();
|
||||
|
||||
idle_duration = ((USB_ControlRequest.wValue & 0xFF00) >> 8);
|
||||
}
|
||||
|
||||
break;
|
||||
case HID_REQ_GetIdle:
|
||||
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
|
||||
{
|
||||
Endpoint_ClearSETUP();
|
||||
while (!(Endpoint_IsINReady()));
|
||||
Endpoint_Write_8(idle_duration);
|
||||
Endpoint_ClearIN();
|
||||
Endpoint_ClearStatusStage();
|
||||
}
|
||||
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Host driver
|
||||
******************************************************************************/
|
||||
static uint8_t keyboard_leds(void)
|
||||
{
|
||||
return keyboard_led_stats;
|
||||
}
|
||||
|
||||
static void send_keyboard(report_keyboard_t *report)
|
||||
{
|
||||
// TODO: handle NKRO report
|
||||
/* Select the Keyboard Report Endpoint */
|
||||
Endpoint_SelectEndpoint(KEYBOARD_IN_EPNUM);
|
||||
|
||||
/* Check if Keyboard Endpoint Ready for Read/Write */
|
||||
if (Endpoint_IsReadWriteAllowed())
|
||||
{
|
||||
/* Write Keyboard Report Data */
|
||||
Endpoint_Write_Stream_LE(report, sizeof(report_keyboard_t), NULL);
|
||||
|
||||
/* Finalize the stream transfer to send the last packet */
|
||||
Endpoint_ClearIN();
|
||||
}
|
||||
keyboard_report_sent = *report;
|
||||
}
|
||||
|
||||
static void send_mouse(report_mouse_t *report)
|
||||
{
|
||||
#ifdef MOUSE_ENABLE
|
||||
/* Select the Mouse Report Endpoint */
|
||||
Endpoint_SelectEndpoint(MOUSE_IN_EPNUM);
|
||||
|
||||
/* Check if Mouse Endpoint Ready for Read/Write */
|
||||
if (Endpoint_IsReadWriteAllowed())
|
||||
{
|
||||
/* Write Mouse Report Data */
|
||||
Endpoint_Write_Stream_LE(report, sizeof(report_mouse_t), NULL);
|
||||
|
||||
/* Finalize the stream transfer to send the last packet */
|
||||
Endpoint_ClearIN();
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
static void send_system(uint16_t data)
|
||||
{
|
||||
report_extra_t r = {
|
||||
.report_id = REPORT_ID_SYSTEM,
|
||||
.usage = data
|
||||
};
|
||||
Endpoint_SelectEndpoint(EXTRA_IN_EPNUM);
|
||||
if (Endpoint_IsReadWriteAllowed()) {
|
||||
Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL);
|
||||
Endpoint_ClearIN();
|
||||
}
|
||||
}
|
||||
|
||||
static void send_consumer(uint16_t data)
|
||||
{
|
||||
report_extra_t r = {
|
||||
.report_id = REPORT_ID_CONSUMER,
|
||||
.usage = data
|
||||
};
|
||||
Endpoint_SelectEndpoint(EXTRA_IN_EPNUM);
|
||||
if (Endpoint_IsReadWriteAllowed()) {
|
||||
Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL);
|
||||
Endpoint_ClearIN();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/*******************************************************************************
|
||||
* sendchar
|
||||
******************************************************************************/
|
||||
int8_t sendchar(uint8_t c)
|
||||
{
|
||||
if (USB_DeviceState != DEVICE_STATE_Configured)
|
||||
return -1;
|
||||
|
||||
Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM);
|
||||
|
||||
uint8_t timeout = 10;
|
||||
uint16_t prevFN = USB_Device_GetFrameNumber();
|
||||
while (!Endpoint_IsINReady()) {
|
||||
switch (USB_DeviceState) {
|
||||
case DEVICE_STATE_Unattached:
|
||||
case DEVICE_STATE_Suspended:
|
||||
return -1;
|
||||
}
|
||||
if (Endpoint_IsStalled())
|
||||
return -1;
|
||||
if (prevFN != USB_Device_GetFrameNumber()) {
|
||||
if (!(timeout--))
|
||||
return -1;
|
||||
prevFN = USB_Device_GetFrameNumber();
|
||||
}
|
||||
}
|
||||
|
||||
Endpoint_Write_8(c);
|
||||
|
||||
// send when packet is full
|
||||
if (!Endpoint_IsReadWriteAllowed())
|
||||
Endpoint_ClearIN();
|
||||
|
||||
return 0;
|
||||
}
|
||||
@ -0,0 +1,58 @@
|
||||
/*
|
||||
* Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
* This file is based on:
|
||||
* LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse
|
||||
* LUFA-120219/Demos/Device/Lowlevel/GenericHID
|
||||
*/
|
||||
|
||||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2012.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.lufa-lib.org
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com)
|
||||
|
||||
Permission to use, copy, modify, distribute, and sell this
|
||||
software and its documentation for any purpose is hereby granted
|
||||
without fee, provided that the above copyright notice appear in
|
||||
all copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaim all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
#ifndef _LUFA_H_
|
||||
#define _LUFA_H_
|
||||
|
||||
#include <avr/io.h>
|
||||
#include <avr/wdt.h>
|
||||
#include <avr/power.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include <stdbool.h>
|
||||
#include <string.h>
|
||||
#include <LUFA/Version.h>
|
||||
#include <LUFA/Drivers/USB/USB.h>
|
||||
|
||||
|
||||
/* extra report structure */
|
||||
typedef struct {
|
||||
uint8_t report_id;
|
||||
uint16_t usage;
|
||||
} __attribute__ ((packed)) report_extra_t;
|
||||
|
||||
#endif
|
||||
@ -1,21 +1,21 @@
|
||||
OPT_DEFS += -DHOST_PJRC
|
||||
|
||||
SRC += pjrc.c \
|
||||
usb_keyboard.c \
|
||||
usb_debug.c \
|
||||
usb.c \
|
||||
bootloader_teensy.c
|
||||
PJRC_DIR = protocol/pjrc
|
||||
|
||||
OPT_DEFS += -DHOST_PJRC
|
||||
|
||||
# Search Path
|
||||
VPATH += $(TOP_DIR)/protocol/pjrc
|
||||
|
||||
SRC += $(PJRC_DIR)/main.c \
|
||||
$(PJRC_DIR)/pjrc.c \
|
||||
$(PJRC_DIR)/usb_keyboard.c \
|
||||
$(PJRC_DIR)/usb_debug.c \
|
||||
$(PJRC_DIR)/usb.c
|
||||
|
||||
# Option modules
|
||||
ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE)
|
||||
SRC += usb_mouse.c
|
||||
SRC += $(PJRC_DIR)/usb_mouse.c
|
||||
endif
|
||||
|
||||
ifdef EXTRAKEY_ENABLE
|
||||
SRC += usb_extra.c
|
||||
SRC += $(PJRC_DIR)/usb_extra.c
|
||||
endif
|
||||
|
||||
# Search Path
|
||||
VPATH += $(TOP_DIR)/$(PJRC_DIR)
|
||||
|
||||
@ -1,40 +0,0 @@
|
||||
/* See http://www.pjrc.com/teensy/jump_to_bootloader.html */
|
||||
#include <avr/io.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include <util/delay.h>
|
||||
#include "bootloader.h"
|
||||
|
||||
void bootloader_jump(void) {
|
||||
cli();
|
||||
// disable watchdog, if enabled
|
||||
// disable all peripherals
|
||||
UDCON = 1;
|
||||
USBCON = (1<<FRZCLK); // disable USB
|
||||
UCSR1B = 0;
|
||||
_delay_ms(5);
|
||||
#if defined(__AVR_AT90USB162__) // Teensy 1.0
|
||||
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0;
|
||||
TIMSK0 = 0; TIMSK1 = 0; UCSR1B = 0;
|
||||
DDRB = 0; DDRC = 0; DDRD = 0;
|
||||
PORTB = 0; PORTC = 0; PORTD = 0;
|
||||
asm volatile("jmp 0x3E00");
|
||||
#elif defined(__AVR_ATmega32U4__) // Teensy 2.0
|
||||
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
|
||||
TIMSK0 = 0; TIMSK1 = 0; TIMSK3 = 0; TIMSK4 = 0; UCSR1B = 0; TWCR = 0;
|
||||
DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0; TWCR = 0;
|
||||
PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
|
||||
asm volatile("jmp 0x7E00");
|
||||
#elif defined(__AVR_AT90USB646__) // Teensy++ 1.0
|
||||
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
|
||||
TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
|
||||
DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
|
||||
PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
|
||||
asm volatile("jmp 0xFC00");
|
||||
#elif defined(__AVR_AT90USB1286__) // Teensy++ 2.0
|
||||
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
|
||||
TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
|
||||
DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
|
||||
PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
|
||||
asm volatile("jmp 0x1FC00");
|
||||
#endif
|
||||
}
|
||||
@ -1,47 +0,0 @@
|
||||
/*
|
||||
Copyright 2011 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <avr/io.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include "bootloader.h"
|
||||
|
||||
|
||||
void bootloader_jump(void) {
|
||||
cli();
|
||||
// This makes custom USBasploader come up.
|
||||
MCUSR = 0;
|
||||
|
||||
// ATmega168PA
|
||||
// initialize ports
|
||||
PORTB = 0; PORTC= 0; PORTD = 0;
|
||||
DDRB = 0; DDRC= 0; DDRD = 0;
|
||||
|
||||
// disable interrupts
|
||||
EIMSK = 0; EECR = 0; SPCR = 0;
|
||||
ACSR = 0; SPMCSR = 0; WDTCSR = 0; PCICR = 0;
|
||||
TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0;
|
||||
ADCSRA = 0; TWCR = 0; UCSR0B = 0;
|
||||
|
||||
// Boot Loader Section Start Address:
|
||||
// BOOTSZ Size Address
|
||||
// (lock bit) (word) (word) (byte)
|
||||
// '11' 128 0x1F80 0x3F00
|
||||
// '10' 256 0x1F00 0x3E00
|
||||
// '01' 512 0x1E00 0x3C00
|
||||
// '00' 1024 0x1C00 0x3800
|
||||
asm volatile("jmp 0x3800");
|
||||
}
|
||||
Loading…
Reference in New Issue