RGB underglow support for JJ40, clean up redundant code in Mechmini keymap (#2196)

* Cleanup Mechmini keymap. Once the custom RGB function is defined, there is no need to manually handle RGB code.

* Change default to KEYMAP_MIT, not KEYMAP_OFFSET

* Add custom RGB code for JJ40

* Reset Mechmini advertised power draw to 500. Will have to test actual maximum power draw later.

* RGB working on JJ40.

* Fix: saturation increase/decrease flipped

* Add new directory for my custom keymap with RGB keycodes

* Swap LAlt and LGUI

* Update JJ40 max power draw with measured value

* Update: fun40 rules.mk to enable underglow; earlier failed Travis CI
audio_out
Kenneth Aloysius 7 years ago committed by Jack Humbert
parent 85ea963931
commit eba4cb7a04

@ -15,6 +15,8 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "config_common.h"
#ifndef CONFIG_H
#define CONFIG_H
@ -39,6 +41,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define NO_UART 1
/* RGB underglow */
// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards.
// The same pin is used on the JJ40, at least.
#define RGBLED_NUM 5
#define RGB_DI_PIN E2
#define RGBLIGHT_ANIMATIONS
/* key combination for command */
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))

@ -22,19 +22,25 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "action_layer.h"
#include "quantum.h"
__attribute__ ((weak))
void matrix_scan_user(void) {
/* Nothing to do here... yet */
}
void matrix_init_kb(void) {
// Call the keymap level matrix init.
matrix_init_user();
// Set our LED pins as output
DDRB |= (1<<6);
#include "i2c.h"
// custom RGB driver
extern rgblight_config_t rgblight_config;
void rgblight_set(void) {
if (!rgblight_config.enable) {
for (uint8_t i=0; i<RGBLED_NUM; i++) {
led[i].r = 0;
led[i].g = 0;
led[i].b = 0;
}
}
i2c_init();
i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
}
void matrix_init_user(void) {
__attribute__ ((weak))
void matrix_scan_user(void) {
rgblight_task();
/* Nothing else for now. */
}

@ -65,6 +65,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
{ K312, K311, K310, K39, K35, K36, K3X, KC_NO, K34, K33, K32, K31 } \
}
#define KEYMAP KEYMAP_OFFSET
#define KEYMAP KEYMAP_MIT
#endif

@ -11,7 +11,11 @@ MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = yes # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
RGBLIGHT_ENABLE = yes
RGBLIGHT_CUSTOM_DRIVER = yes
DISABLE_WS2812 = yes
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend

@ -0,0 +1,85 @@
/*
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "jj40.h"
#include "action_layer.h"
#define _QWERTY 0
#define _LOWER 1
#define _RAISE 2
enum custom_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Qwerty
* ,-----------------------------------------------------------------------------------.
* | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Esc | A | S | D | F | G | H | J | K | L | ; | " |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | N | M | , | . | / |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | Ctrl | GUI | Alt |Lower | Space |Raise | Left | Down | Up |Right |
* `-----------------------------------------------------------------------------------'
*/
[_QWERTY] = KEYMAP( \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
_______, KC_LCTL, KC_LGUI, KC_LALT, MO(_LOWER), KC_SPC, MO(_RAISE), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
),
/* Lower
* ,-----------------------------------------------------------------------------------.
* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | | \ | | |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | F12 | | | | |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | Next | Vol- | Vol+ | Play |
* `-----------------------------------------------------------------------------------'
*/
[_LOWER] = KEYMAP( \
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______,_______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
),
/* Raise
* ,-----------------------------------------------------------------------------------.
* | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | F12 | RGB | RGB | RGB | RGB |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | RGB | RGB | RGB | RGB | | | Next | Vol- | Vol+ | Play |
* `-----------------------------------------------------------------------------------'
*/
[_RAISE] = KEYMAP( \
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, RGB_TOG, RGB_MOD, RGB_VAD, RGB_VAI, _______, \
_______, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
)
};

@ -0,0 +1,2 @@
# krusli
Default JJ40 keymap, adapted with RGB underglow support. GUI and LAlt is also swapped.

@ -37,8 +37,11 @@ EXTRAKEY_ENABLE = yes
CONSOLE_ENABLE = no
COMMAND_ENABLE = yes
BACKLIGHT_ENABLE = no
RGBLIGHT_ENABLE = no
RGBLIGHT_CUSTOM_DRIVER = no
RGBLIGHT_ENABLE = yes
RGBLIGHT_CUSTOM_DRIVER = yes
DISABLE_WS2812 = yes # TODO check if this is necessary
KEY_LOCK_ENABLE = yes
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE

@ -118,7 +118,8 @@ section at the end of this file).
/* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus.
*/
#define USB_CFG_MAX_BUS_POWER 500
// max power draw with maxed white underglow measured at 120 mA (peaks)
#define USB_CFG_MAX_BUS_POWER 150
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]

@ -30,12 +30,15 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROWS 8
#define MATRIX_COLS 15
#define NO_UART 1
/* RGB underglow */
// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards.
// The same pin is used on the JJ40, at least.
#define RGBLED_NUM 16
#define RGBLIGHT_ANIMATIONS
#define RGB_DI_PIN E2
#define NO_UART 1
/* key combination for command */
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))

@ -14,16 +14,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "mechmini.h"
#include "rgblight.h"
#include "quantum.h"
#define MAX_BRIGHTNESS 15
#define MAX_BRIGHTNESS_IOS 5 // max brightness suitable for iOS devices
#define _BL 0
#define _FN1 1
#define _FN2 2
#define _FN3 3
#define _BL 0 // base layer
#define _FN1 1 // function layer 1
#define _FN2 2 // function layer 2
#define _FN3 3 // function layer 3
#define _____ KC_TRNS
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
@ -52,109 +48,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
_____, _____, _____, _____, _____, _____, _____, _____
)
};
/**
* Blank keymap
[0] = KEYMAP(
_____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____
_____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____,
_____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____,
_____, _____, _____, _____, _____, _____, _____, _____
)
*/
uint8_t current_level = 4;
int is_on = 0;
uint8_t r = 0xFF;
uint8_t g = 0xFF;
uint8_t b = 0xFF;
uint8_t max_brightness = MAX_BRIGHTNESS_IOS;
enum macro_id {
TOGGLE_RGB,
BRIGHTNESS_DOWN,
BRIGHTNESS_UP,
COLOR_1,
COLOR_2,
COLOR_3,
ENABLE_MAX_BRIGHTNESS
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
keyevent_t event = record->event;
switch (id) {
case TOGGLE_RGB:
if (event.pressed) {
if (!is_on) {
current_level = 4;
is_on = 1;
} else {
is_on = 0;
}
}
case BRIGHTNESS_DOWN:
if (event.pressed && current_level > 0) {
current_level--;
}
break;
case BRIGHTNESS_UP:
if (event.pressed && current_level < max_brightness) {
current_level++;
}
break;
case COLOR_1: // set to pink
if (event.pressed) {
r = 0xFF;
g = 0x81;
b = 0xC2;
}
break;
case COLOR_2: // set to cyan
if (event.pressed) {
r = 0x00;
g = 0xE0;
b = 0xFF;
}
break;
case COLOR_3: // set to white
if (event.pressed) {
r = 0xFF;
g = 0xFF;
b = 0xFF;
}
break;
case ENABLE_MAX_BRIGHTNESS: // enable all 16 brightness steps
if (event.pressed) {
max_brightness = MAX_BRIGHTNESS;
}
break;
}
return MACRO_NONE;
}
const uint16_t fn_actions[] PROGMEM = {
};
void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b);
uint8_t dim(uint8_t color, uint8_t opacity) {
return ((uint16_t) color * opacity / 0xFF) & 0xFF;
}
void user_setrgb(uint8_t r, uint8_t g, uint8_t b) {
uint8_t alpha = current_level * 0x11;
rgblight_setrgb(dim(r, alpha), dim(g, alpha), dim(b, alpha));
}
void matrix_scan_user(void) {
if (!is_on) {
current_level = 0;
user_setrgb(r, g, b);
} else {
user_setrgb(r, g, b);
}
}

@ -16,16 +16,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "mechmini.h"
#include "rgblight.h"
#include <avr/pgmspace.h>
#include "action_layer.h"
#include "i2c.h"
#include "quantum.h"
extern rgblight_config_t rgblight_config;
#include "rgblight.h"
// custom RGB driver
extern rgblight_config_t rgblight_config;
void rgblight_set(void) {
if (!rgblight_config.enable) {
for (uint8_t i = 0; i < RGBLED_NUM; i++) {
@ -42,4 +42,5 @@ void rgblight_set(void) {
__attribute__ ((weak))
void matrix_scan_user(void) {
rgblight_task();
/* add other tasks to be done on each matrix scan */
}

@ -118,7 +118,7 @@ section at the end of this file).
/* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus.
*/
#define USB_CFG_MAX_BUS_POWER 100
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]

Loading…
Cancel
Save