FIX: send last report when idle timeouts. (pjrc)

example_keyboards
tmk 14 years ago
parent 1a7c3585ed
commit cec2549505

@ -280,7 +280,6 @@ Pinouts
4: GND
Commands
--------
ADB command is 1byte and consists of 4bit-address, 2bit-command
@ -381,6 +380,7 @@ Keyboard Data(Register0)
You can read the state from PSW line(active low) however
the switch has a special scancode 0x7F7F, so you can
also read from Data line. It uses 0xFFFF for release scancode.
Release code seems to delay about some 100ms. Due to Mac soft power?
Keyboard LEDs & state of keys(Register2)
This register hold current state of three LEDs and nine keys.

@ -44,7 +44,7 @@ USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System c
#---------------- Programming Options --------------------------
PROGRAM_CMD = teensy_loader_cli.exe -mmcu=$(MCU) -w -v $(TARGET).hex
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex

@ -17,8 +17,8 @@
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (BIT_LSHIFT | BIT_RSHIFT) || \
keyboard_report->mods == (BIT_LCTRL | BIT_RSHIFT) \
keyboard_report->mods == (BIT_LSHIFT | BIT_LCTRL | BIT_LALT | BIT_LGUI) || \
keyboard_report->mods == (BIT_LSHIFT | BIT_RSHIFT) \
)

@ -87,7 +87,7 @@ uint8_t matrix_scan(void)
_register_key(key1);
}
if (debug_matrix && matrix_is_modified()) {
if (debug_enable) {
print("adb_host_kbd_recv: "); phex16(codes); print("\n");
}
return 1;

@ -102,7 +102,10 @@ uint8_t command_proc(void)
print("UDCON: "); phex(UDCON); print("\n");
print("UDIEN: "); phex(UDIEN); print("\n");
print("UDINT: "); phex(UDINT); print("\n");
print("host_keyboard_leds:"); phex(host_keyboard_leds()); print("\n");
print("usb_keyboard_leds:"); phex(usb_keyboard_leds); print("\n");
print("usb_keyboard_protocol: "); phex(usb_keyboard_protocol); print("\n");
print("usb_keyboard_idle_config:"); phex(usb_keyboard_idle_config); print("\n");
print("usb_keyboard_idle_count:"); phex(usb_keyboard_idle_count); print("\n");
#endif
break;
#ifdef USB_NKRO_ENABLE

@ -1,4 +1,5 @@
#include <stdint.h>
#include <avr/interrupt.h>
#include "usb_keycodes.h"
#include "usb_keyboard.h"
#include "usb_mouse.h"
@ -58,9 +59,12 @@ void host_add_code(uint8_t code)
void host_swap_keyboard_report(void)
{
uint8_t sreg = SREG;
cli();
report_keyboard_t *tmp = keyboard_report_prev;
keyboard_report_prev = keyboard_report;
keyboard_report = tmp;
SREG = sreg;
}
void host_clear_keyboard_report(void)

@ -687,10 +687,11 @@ ISR(USB_GEN_vect)
usb_keyboard_idle_count++;
if (usb_keyboard_idle_count == usb_keyboard_idle_config) {
usb_keyboard_idle_count = 0;
UEDATX = keyboard_report->mods;
UEDATX = keyboard_report_prev->mods;
UEDATX = 0;
for (i=0; i<6; i++) {
UEDATX = keyboard_report->keys[i];
uint8_t keys = usb_keyboard_protocol ? KBD_REPORT_KEYS : 6;
for (i=0; i<keys; i++) {
UEDATX = keyboard_report_prev->keys[i];
}
UEINTX = 0x3A;
}

@ -15,6 +15,7 @@ uint8_t usb_keyboard_protocol=1;
// the idle configuration, how often we send the report to the
// host (ms * 4) even when it hasn't changed
// Windows and Linux set 0 while OS X sets 6(24ms) by SET_IDLE request.
uint8_t usb_keyboard_idle_config=125;
// count until idle timeout

@ -1,3 +1,5 @@
#include <stdint.h>
#include <avr/interrupt.h>
#include "usbdrv.h"
#include "usbconfig.h"
#include "print.h"
@ -63,9 +65,12 @@ void host_add_code(uint8_t code)
void host_swap_keyboard_report(void)
{
uint8_t sreg = SREG;
cli();
report_keyboard_t *tmp = keyboard_report_prev;
keyboard_report_prev = keyboard_report;
keyboard_report = tmp;
SREG = sreg;
}
void host_clear_keyboard_report(void)

Loading…
Cancel
Save