Merge remote-tracking branch 'origin/master' into clueboard_hotswap
skullY
7 years ago
commit
ac36c24e65
@ -1,29 +1,89 @@
|
||||
# Bootmagic
|
||||
|
||||
<!-- FIXME: Describe the bootmagic feature here. -->
|
||||
|
||||
## Bootmagic Keycodes
|
||||
|
||||
Shortcuts for bootmagic options. You can use these even when bootmagic is off.
|
||||
|
||||
|Key |Aliases |Description |
|
||||
|----------------------------------|---------|------------------------------------|
|
||||
|`MAGIC_SWAP_CONTROL_CAPSLOCK` | |Swap Left Control and Caps Lock |
|
||||
|`MAGIC_CAPSLOCK_TO_CONTROL` | |Treat Caps Lock as Control |
|
||||
|`MAGIC_SWAP_LALT_LGUI` | |Swap Left Alt and GUI |
|
||||
|`MAGIC_SWAP_RALT_RGUI` | |Swap Right Alt and GUI |
|
||||
|`MAGIC_NO_GUI` | |Disable the GUI key |
|
||||
|`MAGIC_SWAP_GRAVE_ESC` | |Swap <code>`</code> and Escape |
|
||||
|`MAGIC_SWAP_BACKSLASH_BACKSPACE` | |Swap Backslash and Backspace |
|
||||
|`MAGIC_HOST_NKRO` | |Force NKRO on |
|
||||
|`MAGIC_SWAP_ALT_GUI` |`AG_SWAP`|Swap Alt and GUI on both sides |
|
||||
|`MAGIC_UNSWAP_CONTROL_CAPSLOCK` | |Unswap Left Control and Caps Lock |
|
||||
|`MAGIC_UNCAPSLOCK_TO_CONTROL` | |Stop treating CapsLock as Control |
|
||||
|`MAGIC_UNSWAP_LALT_LGUI` | |Unswap Left Alt and GUI |
|
||||
|`MAGIC_UNSWAP_RALT_RGUI` | |Unswap Right Alt and GUI |
|
||||
|`MAGIC_UNNO_GUI` | |Enable the GUI key |
|
||||
|`MAGIC_UNSWAP_GRAVE_ESC` | |Unswap <code>`</code> and Escape|
|
||||
|`MAGIC_UNSWAP_BACKSLASH_BACKSPACE`| |Unswap Backslash and Backspace |
|
||||
|`MAGIC_UNHOST_NKRO` | |Force NKRO off |
|
||||
|`MAGIC_UNSWAP_ALT_GUI` |`AG_NORM`|Unswap Left Alt and GUI |
|
||||
|`MAGIC_TOGGLE_NKRO` | |Turn NKRO on or off |
|
||||
# Bootmagic and Magic Keycodes
|
||||
|
||||
There are 3 separate but related features that allow you to change the behavior of your keyboard without reflashing. While each of them have similar functionality you access that functionality in different ways depending on how your keyboard is configured.
|
||||
|
||||
Bootmagic is a system for configuring your keyboard while it initializes. To trigger a Bootmagic command you hold down the bootmagic key (`KC_SPACE` on most keyboards) and one or more command keys.
|
||||
|
||||
Bootmagic Keycodes allow you to access the Bootmagic functionality after your keyboard has initialized. To use Bootmagic Keycodes you assign keycodes starting with `MAGIC_`, much in the same way you define any other key.
|
||||
|
||||
Command is a feature that allows you to control different aspects of your keyboard. Command used to be called Magic. Command is typically accessed by holding Left and Right Shift at the same time, although that can be customized. While it shares some functionality with Bootmagic it also allows you to access functionality that Bootmagic does not. For more information see the (Command)[feature_command.md) documentation page.
|
||||
|
||||
## Enabling Bootmagic
|
||||
|
||||
Bootmagic is disabled by default. To use Bootmagic you need to enable it in your `rules.mk` file:
|
||||
|
||||
BOOTMAGIC_ENABLE = yes
|
||||
|
||||
## Bootmagic Hotkeys and Keycodes
|
||||
|
||||
This table describes the default Hotkeys for Bootmagic and the Keycodes for Magic. These may be overriden at the Keyboard or Keymap level. Some functionality is not available in both methods.
|
||||
|
||||
To use the Hotkey hold down `BOOTMAGIC_KEY_SALT` (`KC_SPACE` by default) and the Hotkey while plugging in your keyboard. To use the Keycode assign that keycode to a layer. For example, if you hold down Space+B while plugging in most keyboards, you will enter bootloader mode.
|
||||
|
||||
|Hotkey |Keycode |Description |
|
||||
|-----------|----------------------------------|--------------------------------------------------------|
|
||||
|`ESC` | |Skip bootmagic and saved eeprom configuration |
|
||||
|`B` |`RESET` |Enter bootloader instead of firmware |
|
||||
|`D` |`DEBUG` |Enable debugging (writes messages to serial) |
|
||||
|`X` | |Enable matrix debugging |
|
||||
|`K` | |Enable keyboard debugging |
|
||||
|`M` | |Enable mouse debugging |
|
||||
|`BACKSPACE`| |Clear the saved settings from flash |
|
||||
|`CAPSLOCK` |`MAGIC_CAPSLOCK_TO_CONTROL` |Treat `Capslock` as `Control` |
|
||||
| |`MAGIC_UNCAPSLOCK_TO_CONTROL` |Stop treating CapsLock as Control |
|
||||
|`LCTRL` |`MAGIC_SWAP_CONTROL_CAPSLOCK` |Swap `Control` and `Capslock` |
|
||||
| |`MAGIC_UNSWAP_CONTROL_CAPSLOCK` |Unswap Left Control and Caps Lock |
|
||||
| |`MAGIC_SWAP_ALT_GUI` |Swap Alt and GUI on both sides |
|
||||
| |`MAGIC_UNSWAP_ALT_GUI` |Unswap Left Alt and GUI |
|
||||
|`LALT` |`MAGIC_SWAP_LALT_LGUI` |Swap Left `Alt` and `GUI`, e.g. for OSX Opt and Cmd |
|
||||
| |`MAGIC_UNSWAP_LALT_LGUI` |Unswap Left Alt and GUI |
|
||||
|`RALT` |`MAGIC_SWAP_RALT_RGUI` |Swap Right `Alt` and `GUI` |
|
||||
| |`MAGIC_UNSWAP_RALT_RGUI` |Unswap Right Alt and GUI |
|
||||
|`LGUI` |`MAGIC_NO_GUI` |Disable GUI key - e.g. disable Windows key during gaming|
|
||||
| |`MAGIC_UNNO_GUI` |Enable the GUI key |
|
||||
|`GRAVE` |`MAGIC_SWAP_GRAVE_ESC` |Swap `\`~` and `ESC` |
|
||||
| |`MAGIC_UNSWAP_GRAVE_ESC` |Unswap `\`~` and Escape |
|
||||
|`BACKSLASH`|`MAGIC_SWAP_BACKSLASH_BACKSPACE` |Swap Blackslash and Backspace |
|
||||
| |`MAGIC_UNSWAP_BACKSLASH_BACKSPACE`|Unswap Backslash and Backspace |
|
||||
|`N` |`MAGIC_HOST_NKRO` |Force N-Key Rollover (NKRO) on |
|
||||
| |`MAGIC_UNHOST_NKRO` |Force NKRO off |
|
||||
| |`MAGIC_TOGGLE_NKRO` |Toggle NKRO on or off |
|
||||
|`0` |`DF(0)` |Make Layer 0 the default layer at bootup |
|
||||
|`1` |`DF(1)` |Make Layer 1 the default layer at bootup |
|
||||
|`2` |`DF(2)` |Make Layer 2 the default layer at bootup |
|
||||
|`3` |`DF(3)` |Make Layer 3 the default layer at bootup |
|
||||
|`4` |`DF(4)` |Make Layer 4 the default layer at bootup |
|
||||
|`5` |`DF(5)` |Make Layer 5 the default layer at bootup |
|
||||
|`6` |`DF(6)` |Make Layer 6 the default layer at bootup |
|
||||
|`7` |`DF(7)` |Make Layer 7 the default layer at bootup |
|
||||
|
||||
## Bootmagic Configuration
|
||||
|
||||
When setting up your keyboard and/or keymap there are a number of `#define`s that control the behavior of Bootmagic. To use these put them in your `config.h`, either at the keyboard or keymap level.
|
||||
|
||||
|Define |Default|Description |
|
||||
|-------|-------|------------|
|
||||
|`BOOTMAGIC_KEY_SALT`|`KC_SPACE`|The key to hold down to trigger Bootmagic during initialization.|
|
||||
|`BOOTMAGIC_KEY_SKIP`|`KC_ESC`|The Hotkey to ignore saved eeprom configuration.|
|
||||
|`BOOTMAGIC_KEY_EEPROM_CLEAR`|`KC_BSPACE`|The hotkey to clear the saved eeprom configuration.|
|
||||
|`BOOTMAGIC_KEY_BOOTLOADER`|`KC_B`|The hotkey to enter the bootloader.|
|
||||
|`BOOTMAGIC_KEY_DEBUG_ENABLE`|`KC_D`|The hotkey to enable debug mode.|
|
||||
|`BOOTMAGIC_KEY_DEBUG_MATRIX`|`KC_X`|The hotkey to enable matrix debugging mode.|
|
||||
|`BOOTMAGIC_KEY_DEBUG_KEYBOARD`|`KC_K`|The hotkey to enable keyboard debugging mode.|
|
||||
|`BOOTMAGIC_KEY_DEBUG_MOUSE`|`KC_M`|The hotkey to enable mouse debugging mode.|
|
||||
|`BOOTMAGIC_KEY_SWAP_CONTROL_CAPSLOCK`|`KC_LCTRL`||
|
||||
|`BOOTMAGIC_KEY_CAPSLOCK_TO_CONTROL`|`KC_CAPSLOCK`||
|
||||
|`BOOTMAGIC_KEY_SWAP_LALT_LGUI`|`KC_LALT`||
|
||||
|`BOOTMAGIC_KEY_SWAP_RALT_RGUI`|`KC_RALT`||
|
||||
|`BOOTMAGIC_KEY_NO_GUI`|`KC_LGUI`||
|
||||
|`BOOTMAGIC_KEY_SWAP_GRAVE_ESC`|`KC_GRAVE`||
|
||||
|`BOOTMAGIC_KEY_SWAP_BACKSLASH_BACKSPACE`|`KC_BSLASH`||
|
||||
|`BOOTMAGIC_HOST_NKRO`|`KC_N`||
|
||||
|`BOOTMAGIC_KEY_DEFAULT_LAYER_0`|`KC_0`|Hotkey to set Layer 0 as the default layer|
|
||||
|`BOOTMAGIC_KEY_DEFAULT_LAYER_1`|`KC_1`|Hotkey to set Layer 1 as the default layer|
|
||||
|`BOOTMAGIC_KEY_DEFAULT_LAYER_2`|`KC_2`|Hotkey to set Layer 2 as the default layer|
|
||||
|`BOOTMAGIC_KEY_DEFAULT_LAYER_3`|`KC_3`|Hotkey to set Layer 3 as the default layer|
|
||||
|`BOOTMAGIC_KEY_DEFAULT_LAYER_4`|`KC_4`|Hotkey to set Layer 4 as the default layer|
|
||||
|`BOOTMAGIC_KEY_DEFAULT_LAYER_5`|`KC_5`|Hotkey to set Layer 5 as the default layer|
|
||||
|`BOOTMAGIC_KEY_DEFAULT_LAYER_6`|`KC_6`|Hotkey to set Layer 6 as the default layer|
|
||||
|`BOOTMAGIC_KEY_DEFAULT_LAYER_7`|`KC_7`|Hotkey to set Layer 7 as the default layer|
|
||||
|
||||
@ -0,0 +1,52 @@
|
||||
# Command (Formerly known as Magic)
|
||||
|
||||
Command is a way to change your keyboard's behavior without having to flash or unplug it to use [Bootmagic](feature_bootmagic.md). There is a lot of overlap between this functionality and the [Bootmagic Keycodes](feature_bootmagic.md). Whenever possible we encourage you to use that functionality instead of Command.
|
||||
|
||||
## Enabling Command
|
||||
|
||||
By default Command is disabled. You can enable it in your `rules.mk` file:
|
||||
|
||||
COMMAND_ENABLE = yes
|
||||
|
||||
## Usage
|
||||
|
||||
To use Command you hold down the key combination defined by `IS_COMMAND`. By default that combination is both shift keys. While holding the key combination press the key corresponding to the command you want.
|
||||
|
||||
For example, to write the current QMK version to the QMK Toolbox console, you can press `Left Shift`+`Right Shift`+`V`.
|
||||
|
||||
## Configuration
|
||||
|
||||
The following values can be defined in `config.h` to control the behavior of Command.
|
||||
|
||||
|Define |Default | Description |
|
||||
|-------|--------|-------------|
|
||||
|`IS_COMMAND()` |`(keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))`|Key combination to activate Command|
|
||||
|`MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS` |`true` |Do layer switching with Function row|
|
||||
|`MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS` |`true` |Do layer switching with number keys.|
|
||||
|`MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM`|`false` |Do layer switching with custom keys (`MAGIC_KEY_LAYER0..9` below.)|
|
||||
|`MAGIC_KEY_HELP1` |`H` |Show help.|
|
||||
|`MAGIC_KEY_HELP2` |`SLASH` |Show help.|
|
||||
|`MAGIC_KEY_DEBUG` |`D` |Turn on debug mode.|
|
||||
|`MAGIC_KEY_DEBUG_MATRIX` |`X` |Turn on matrix debugging.|
|
||||
|`MAGIC_KEY_DEBUG_KBD` |`K` |Turn on keyboard debugging.|
|
||||
|`MAGIC_KEY_DEBUG_MOUSE` |`M` |Turn on mouse debugging.|
|
||||
|`MAGIC_KEY_VERSION` |`V` |Write the QMK version to the console|
|
||||
|`MAGIC_KEY_STATUS` |`S` |Show the current keyboard status|
|
||||
|`MAGIC_KEY_CONSOLE` |`C` |Enable the Command Console|
|
||||
|`MAGIC_KEY_LAYER0_ALT1` |`ESC` |Alternate access to layer 0|
|
||||
|`MAGIC_KEY_LAYER0_ALT2` |`GRAVE` |Alternate access to layer 0|
|
||||
|`MAGIC_KEY_LAYER0` |`0` |Change default layer to 0|
|
||||
|`MAGIC_KEY_LAYER1` |`1` |Change default layer to 1|
|
||||
|`MAGIC_KEY_LAYER2` |`2` |Change default layer to 2|
|
||||
|`MAGIC_KEY_LAYER3` |`3` |Change default layer to 3|
|
||||
|`MAGIC_KEY_LAYER4` |`4` |Change default layer to 4|
|
||||
|`MAGIC_KEY_LAYER5` |`5` |Change default layer to 5|
|
||||
|`MAGIC_KEY_LAYER6` |`6` |Change default layer to 6|
|
||||
|`MAGIC_KEY_LAYER7` |`7` |Change default layer to 7|
|
||||
|`MAGIC_KEY_LAYER8` |`8` |Change default layer to 8|
|
||||
|`MAGIC_KEY_LAYER9` |`9` |Change default layer to 9|
|
||||
|`MAGIC_KEY_BOOTLOADER` |`PAUSE` |Exit keyboard and enter bootloader|
|
||||
|`MAGIC_KEY_LOCK` |`CAPS` |Lock the keyboard so nothing can be typed|
|
||||
|`MAGIC_KEY_EEPROM` |`E` |Erase EEPROM settings|
|
||||
|`MAGIC_KEY_NKRO` |`N` |Toggle NKRO on/off|
|
||||
|`MAGIC_KEY_SLEEP_LED` |`Z` |Toggle LED when computer is sleeping on/off|
|
||||
@ -0,0 +1,31 @@
|
||||
# Swap-Hands Action
|
||||
|
||||
The swap-hands action allows support for one-handed typing without requiring a separate layer. Set `ONEHAND_ENABLE` in the Makefile and define a `hand_swap_config` entry in your keymap. Now whenever the `ACTION_SWAP_HANDS` command key is pressed the keyboard is mirrored. For instance, to type "Hello, World" on QWERTY you would type `^Ge^s^s^w^c W^wr^sd`
|
||||
|
||||
## Configuration
|
||||
|
||||
The configuration table is a simple 2-dimensional array to map from column/row to new column/row. Example `hand_swap_config` for Planck:
|
||||
|
||||
```C
|
||||
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
|
||||
{{11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}},
|
||||
{{11, 1}, {10, 1}, {9, 1}, {8, 1}, {7, 1}, {6, 1}, {5, 1}, {4, 1}, {3, 1}, {2, 1}, {1, 1}, {0, 1}},
|
||||
{{11, 2}, {10, 2}, {9, 2}, {8, 2}, {7, 2}, {6, 2}, {5, 2}, {4, 2}, {3, 2}, {2, 2}, {1, 2}, {0, 2}},
|
||||
{{11, 3}, {10, 3}, {9, 3}, {8, 3}, {7, 3}, {6, 3}, {5, 3}, {4, 3}, {3, 3}, {2, 3}, {1, 3}, {0, 3}},
|
||||
};
|
||||
```
|
||||
|
||||
Note that the array indices are reversed same as the matrix and the values are of type `keypos_t` which is `{col, row}` and all values are zero-based. In the example above, `hand_swap_config[2][4]` (third row, fifth column) would return `{7, 2}` (third row, eighth column). Yes, this is confusing.
|
||||
|
||||
## Advanced Swap Commands
|
||||
|
||||
|Macro | Description |
|
||||
|------|-------------|
|
||||
| `ACTION_SWAP_HANDS()` | Swaps hands when pressed, returns to normal when released (momentary). |
|
||||
| `ACTION_SWAP_HANDS_TOGGLE()` | Toggles swap on and off with every key press. |
|
||||
| `ACTION_SWAP_HANDS_TAP_TOGGLE()` | Toggles with a tap; momentary when held. |
|
||||
| `ACTION_SWAP_HANDS_TAP_KEY(key)`| Sends `key` with a tap; momentary swap when held. |
|
||||
| `ACTION_SWAP_HANDS_ON_OFF()` | Alias for `ACTION_SWAP_HANDS()` |
|
||||
| `ACTION_SWAP_HANDS_OFF_ON()` | Momentarily turns off swap. |
|
||||
| `ACTION_SWAP_HANDS_ON()` | Turns on swapping and leaves it on. |
|
||||
| `ACTION_SWAP_HANDS_OFF()` | Turn off swapping and leaves it off. Good for returning to a known state. |
|
||||
@ -0,0 +1,21 @@
|
||||
# Getting Help
|
||||
|
||||
There are a lot of resources for getting help with QMK.
|
||||
|
||||
## Realtime Chat
|
||||
|
||||
You can find QMK developers and users on our main [gitter chat room](https://gitter.im/qmk/qmk_firmware). We also have other rooms for more specific discussion:
|
||||
|
||||
* [Main Firmware Chat](https://gitter.im/qmk/qmk_firmware)
|
||||
* [QMK Toolbox](https://gitter.im/qmk/qmk_toolbox)
|
||||
* [Hardware Design Discussion](https://gitter.im/qmk/qmk_hardware)
|
||||
* [Web Configurator](https://gitter.im/qmk/qmk_configurator)
|
||||
* [Compiler API](https://gitter.im/qmk/qmk_compiler_api)
|
||||
|
||||
## OLKB Subreddit
|
||||
|
||||
The official QMK forum is [/r/olkb](https://reddit.com/r/olkb) on [reddit.com](https://reddit.com).
|
||||
|
||||
## Github Issues
|
||||
|
||||
You can open an [issue on GitHub](https://github.com/qmk/qmk_firmware/issues). This is especially handy when your issue will require long-term discussion or debugging.
|
||||
@ -0,0 +1,16 @@
|
||||
# The Compelete Newbs Guide To QMK
|
||||
|
||||
QMK is a powerful Open Source firmware for your mechanical keyboard. You can use QMK to customize your keyboard in ways both simple and powerful. People of all skill levels, from complete newbie to master programmer, have successfully used QMK to customize their keyboard. This guide will help you do the same, no matter your skill level.
|
||||
|
||||
Not sure if your keyboard can run QMK? If it's a mechanical keyboard you built yourself chances are good it can. We support a [large number of hobbyist boards](http://qmk.fm/keyboards/), so even if your current keyboard can't run QMK you shouldn't have trouble finding one to suit your needs.
|
||||
|
||||
## Overview
|
||||
|
||||
There are 4 main sections to this guide:
|
||||
|
||||
* [Getting Started](newbs_getting_started.md)
|
||||
* [Building Your First Firmware](newbs_building_firmware.md)
|
||||
* [Flashing Firmware](newbs_flashing.md)
|
||||
* [Testing and Debugging](newbs_testing_debugging.md)
|
||||
|
||||
This guide is focused on helping someone who has never compiled software before. It makes choices and recommendations based on that viewpoint. There are alternative methods for many of these procedures, and we support most of those alternatives. If you have any doubt about how to accomplish a task you can [ask us for guidance](getting_started_getting_help.md).
|
||||
@ -0,0 +1,73 @@
|
||||
# Building Your First Firmware
|
||||
|
||||
Now that you have setup your build environment you are ready to start building custom firmware. For this section of the guide we will bounce between 3 programs- your file manager, your text editor, and your terminal window. Keep all 3 open until you are done and happy with your keyboard firmware.
|
||||
|
||||
If you have closed and reopened your terminal window since following the first part of the guide, don't forget to `cd qmk_firmware` so that your terminal is in the correct directory.
|
||||
|
||||
## Navigate To Your Keymaps Folder
|
||||
|
||||
Start by navigating to the `keymaps` folder for your keyboard.
|
||||
|
||||
{% hint style='info' %}
|
||||
If you are on macOS or Windows there are commands you can use to easily open the keymaps folder.
|
||||
|
||||
macOS:
|
||||
|
||||
open keyboards/<keyboard_folder>/keymaps
|
||||
|
||||
Windows:
|
||||
|
||||
start keyboards/<keyboard_folder>/keymaps
|
||||
{% endhint %}
|
||||
|
||||
## Create a Copy Of The `default` Keymap
|
||||
|
||||
Once you have the `keymaps` folder open you will want to create a copy of the `default` folder. We highly recommend you name your folder the same as your GitHub username, but you can use any name you want as long as it contains only lower case letters, numbers, and the underscore character.
|
||||
|
||||
## Open `keymap.c` In Your Favorite Text Editor
|
||||
|
||||
Open up your `keymap.c`. Inside this file you'll find the structure that controls how your keyboard behaves. At the top of `keymap.c` there may be some defines and enums that make the keymap easier to read. Farther down you'll find a line that looks like this:
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
This line indicates the start of the list of Layers. Below that you'll find lines containing either `LAYOUT` or `KEYMAP`, and these lines indicate the start of a layer. Below that line is the list of keys that comprise a that particular layer.
|
||||
|
||||
{% hint style='danger' %}
|
||||
When editing your keymap file be careful not to add or remove any commas. If you do you will prevent your firmware from compiling and it may not be easy to figure out where the extra, or missing, comma is.
|
||||
{% endhint %}
|
||||
|
||||
## Customize The Layout To Your Liking
|
||||
|
||||
How to complete this step is entirely up to you. Make the one change that's been bugging you, or completely rework everything. You can remove layers if you don't need all of them, or add layers up to a total of 32. Check the following documentation to find out what you can define here:
|
||||
|
||||
* [Keycodes](keycodes.md)
|
||||
* [Features](features.md)
|
||||
* [FAQ](faq.md)
|
||||
|
||||
{% hint style='info' %}
|
||||
While you get a feel for how keymaps work, keep each change small. Bigger changes make it harder to debug any problems that arise.
|
||||
{% endhint %}
|
||||
|
||||
## Build Your Firmware
|
||||
|
||||
When your changes to the keymap are complete you will need to build the firmware. To do so go back to your terminal window and run the build command:
|
||||
|
||||
make <my_keyboard>:<my_keymap>
|
||||
|
||||
For example, if your keymap is named "xyverz" and you're building a keymap for a rev5 planck, you'll use this command:
|
||||
|
||||
make planck/rev5:xyverz
|
||||
|
||||
While this compiles you will have a lot of output going to the screen informing you of what files are being compiled. It should end with output that looks similar to this:
|
||||
|
||||
```
|
||||
Linking: .build/planck_rev5_xyverz.elf [OK]
|
||||
Creating load file for flashing: .build/planck_rev5_xyverz.hex [OK]
|
||||
Copying planck_rev5_xyverz.hex to qmk_firmware folder [OK]
|
||||
Checking file size of planck_rev5_xyverz.hex [OK]
|
||||
* File size is fine - 18392/28672
|
||||
```
|
||||
|
||||
## Flash Your Firmware
|
||||
|
||||
Move on to [Flashing Firmware](newbs_flashing.md) to learn how to write your new firmware to your keyboard.
|
||||
@ -0,0 +1,79 @@
|
||||
# Flashing Your Keyboard With QMK Toolbox
|
||||
|
||||
Now that you've built a custom firmware file you'll want to flash your keyboard.
|
||||
|
||||
## Load The File Into QMK Toolbox
|
||||
|
||||
Begin by opening the QMK Toolbox application. You'll want to locate the firmware file in Finder or Explorer. Your keyboard firmware may be in one of two formats- `.hex` or `.bin`. QMK tries to copy the appropriate one for your keyboard into the root `qmk_firmware` directory.
|
||||
|
||||
{% hint style='info' %}
|
||||
If you are on Windows or macOS there are commands you can use to easily open the current firmware folder in Explorer or Finder.
|
||||
|
||||
Windows:
|
||||
|
||||
start .
|
||||
|
||||
macOS:
|
||||
|
||||
open .
|
||||
{% endhint %}
|
||||
|
||||
The firmware file always follows this naming format:
|
||||
|
||||
<keyboard_name>_<keymap_name>.{bin,hex}
|
||||
|
||||
For example, the `plank/rev5` with a `default` keymap will have this filename:
|
||||
|
||||
planck_rev5_default.hex
|
||||
|
||||
Once you have located your firmware file drag it into the "Local file" box in QMK Toolbox, or click "Open" and navigate to where your firmware file is stored.
|
||||
|
||||
## Put Your Keyboard Into DFU (Bootloader) Mode
|
||||
|
||||
In order to flash your custom firmware you have to put your keyboard into a special flashing mode. While it is in this mode you will not be able to type or otherwise use your keyboard. It is very important that you do not unplug your keyboard or otherwise interrupt the flashing process while the firmware is being written.
|
||||
|
||||
Different keyboards have different ways to enter this special mode. If your PCB currently runs QMK or TMK and you have not been given specific instructions try the following, in order:
|
||||
|
||||
* Hold down both shift keys and press `Pause`
|
||||
* Hold down both shift keys and press `B`
|
||||
* Unplug your keyboard, hold down the Spacebar and `B` at the same time, plug in your keyboard and wait a second before releasing the keys
|
||||
* Press the physical `RESET` button on the bottom of the PCB
|
||||
* Locate header pins on the PCB labeled `BOOT0` or `RESET`, short those together while plugging your PCB in
|
||||
|
||||
When you are successful you will see a message similar to this in QMK Toolbox:
|
||||
|
||||
```
|
||||
*** Clueboard - Clueboard 66% HotSwap disconnected -- 0xC1ED:0x2390
|
||||
*** DFU device connected
|
||||
```
|
||||
|
||||
## Flash Your Keyboard
|
||||
|
||||
Click the `Flash` button in QMK Toolbox. You will see output similar to the following:
|
||||
|
||||
```
|
||||
*** Clueboard - Clueboard 66% HotSwap disconnected -- 0xC1ED:0x2390
|
||||
*** DFU device connected
|
||||
*** Attempting to flash, please don't remove device
|
||||
>>> dfu-programmer atmega32u4 erase --force
|
||||
Erasing flash... Success
|
||||
Checking memory from 0x0 to 0x6FFF... Empty.
|
||||
>>> dfu-programmer atmega32u4 flash /Users/skully/qmk_firmware/clueboard_66_hotswap_gen1_skully.hex
|
||||
Checking memory from 0x0 to 0x55FF... Empty.
|
||||
0% 100% Programming 0x5600 bytes...
|
||||
[>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>] Success
|
||||
0% 100% Reading 0x7000 bytes...
|
||||
[>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>] Success
|
||||
Validating... Success
|
||||
0x5600 bytes written into 0x7000 bytes memory (76.79%).
|
||||
>>> dfu-programmer atmega32u4 reset
|
||||
|
||||
*** DFU device disconnected
|
||||
*** Clueboard - Clueboard 66% HotSwap connected -- 0xC1ED:0x2390
|
||||
```
|
||||
|
||||
## Test It Out!
|
||||
|
||||
Congrats! Your custom firmware has been programmed to your keyboard!
|
||||
|
||||
Give it a try and make sure everything works the way you want it to. We've written [Testing and Debugging](newbs_testing_debugging.md) to round out this Newbie Guide, so head over there to learn about how to troubleshoot your custom functionality.
|
||||
@ -0,0 +1,98 @@
|
||||
# Introduction
|
||||
|
||||
Your computer keyboard has a processor inside of it, not unlike the one inside your computer. This processor runs software that is responsible for detecting button presses and sending reports about the state of the keyboard when they are pressed or released. QMK fills the role of that software, detecting button presses and passing that information on to the host computer. When you build your custom layout you are creating the equivalent of an .exe for your keyboard.
|
||||
|
||||
QMK tries to put a lot of power into your hands by making easy things easy, and hard things possible. You don't have to know how to program to create powerful layouts, you only have to follow a few simple syntax rules.
|
||||
|
||||
# Getting Started
|
||||
|
||||
Before you can build keymaps you need to install some software and setup your build environment. This only has to be done one time no matter how many keyboards you want to compile firmware for.
|
||||
|
||||
## Download Software
|
||||
|
||||
### Text Editor
|
||||
|
||||
You'll need a program that can edit and save **plain text** files. If you are on Windows you can make due with Notepad, and on Linux you can use Gedit, both of which are simple but functional text editors. On macOS you can not use TextEdit.app, it will not save plain text files. You will need to install another program such as Sublime Text.
|
||||
|
||||
{% hint style='info' %}
|
||||
Not sure which text editor to use? Laurence Bradford wrote [a great introduction](https://learntocodewith.me/programming/basics/text-editors/) to the subject.
|
||||
{% endhint %}
|
||||
|
||||
### QMK Toolbox
|
||||
|
||||
QMK Toolbox is a Windows and macOS program that allows you to both program and debug your custom keyboard. You will want to install it so that you can easily flash your keyboard and receive the debugging messages that your keyboard will print.
|
||||
|
||||
* [Newest Release](https://github.com/qmk/qmk_toolbox/releases/latest)
|
||||
* [Source Code](https://github.com/qmk/qmk_toolbox/)
|
||||
|
||||
## Environment Setup
|
||||
|
||||
We've tried to make QMK as easy to setup as possible. You only have to prepare your Linux or Unix environment and let QMK install the rest.
|
||||
|
||||
{% hint style="info" %}
|
||||
If you haven't worked with the Linux/Unix command line before there are a few basic concepts and commands you should learn. These resources will teach you enough to work with QMK:
|
||||
|
||||
* [Must Know Linux Commands](https://www.guru99.com/must-know-linux-commands.html)
|
||||
* [Some Basic Unix Commands](https://www.tjhsst.edu/~dhyatt/superap/unixcmd.html)
|
||||
{% endhint %}
|
||||
|
||||
### Windows
|
||||
|
||||
You will need to install msys2 and git.
|
||||
|
||||
* Follow the installation instructions on the msys2 homepage: http://www.msys2.org
|
||||
* Close any open msys2 terminals, and open a new terminal
|
||||
* Install git by running this command: `pacman -S git`
|
||||
|
||||
### macOS
|
||||
|
||||
You will need to install homebrew. Follow the instructions on the homebrew homepage: https://brew.sh
|
||||
|
||||
### Linux
|
||||
|
||||
You will need to install git. It's extremely likely you already have it, but if not one of the following commands should install it:
|
||||
|
||||
* Debian/Ubuntu/Devuan: `apt-get install git`
|
||||
* Fedora/Redhat/Centos: `yum install git`
|
||||
* Arch: `pacman -S git`
|
||||
|
||||
## Download QMK
|
||||
|
||||
Once you have setup your Linux/Unix environment you are ready to download QMK. We will do this by using git to "clone" the QMK repository. Open a Terminal or MSYS2 Console window and leave it open for the remainder of this guide. Inside that window run these two commands:
|
||||
|
||||
git clone https://github.com/qmk/qmk_firmware.git
|
||||
cd qmk_firmware
|
||||
|
||||
{% hint style='info' %}
|
||||
If you already know [how to use GitHub](getting_started_github.md) we recommend you create and clone your own fork instead. If you don't know what that means you can safely ignore this message.
|
||||
{% endhint %}
|
||||
|
||||
## Setup QMK
|
||||
|
||||
QMK comes with a script to help you setup the rest of what you'll need. You should run it now by typing in this command:
|
||||
|
||||
./util/qmk_install.sh
|
||||
|
||||
## Test Your Build Environment
|
||||
|
||||
Now that your QMK build environment is setup you can build a firmware for your keyboard. Start by trying to build the default layout for your keyboard. You should be able to do that with a command in this format:
|
||||
|
||||
make <keyboard>:default
|
||||
|
||||
For example, to build a firmware for a Clueboard 66% use:
|
||||
|
||||
make clueboard/66/rev3:default
|
||||
|
||||
When it is done you should have a lot of output that ends similar to this:
|
||||
|
||||
```
|
||||
Linking: .build/clueboard_66_rev2_default.elf [OK]
|
||||
Creating load file for flashing: .build/clueboard_66_rev2_default.hex [OK]
|
||||
Copying clueboard_66_rev2_default.hex to qmk_firmware folder [OK]
|
||||
Checking file size of clueboard_66_rev2_default.hex [OK]
|
||||
* File size is fine - 25174/28672
|
||||
```
|
||||
|
||||
## Creating Your Layout
|
||||
|
||||
Now you are ready to create your own personal layout. Move on to [Building Your First Firmware](newbs_building_firmware.md) for that.
|
||||
@ -0,0 +1,33 @@
|
||||
# Testing and Debugging
|
||||
|
||||
Once you've flashed your keyboard with a custom firmware you're ready to test it out. With a little bit of luck everything will work perfectly, but if not this document will help you figure out what's wrong.
|
||||
|
||||
## Testing
|
||||
|
||||
Testing your keyboard is usually pretty straightforward. Press every single key and make sure it sends the keys you expect. There are even programs that will help you make sure that no key is missed.
|
||||
|
||||
Note: These programs are not provided by or endorsed by QMK.
|
||||
|
||||
* [Switch Hitter](https://elitekeyboards.com/switchhitter.php) (Windows Only)
|
||||
* [Keyboard Viewer](https://www.imore.com/how-use-keyboard-viewer-your-mac) (Mac Only)
|
||||
* [Keyboard Tester](http://www.keyboardtester.com) (Web Based)
|
||||
* [Keyboard Checker](http://keyboardchecker.com) (Web Based)
|
||||
|
||||
## Debugging With QMK Toolbox
|
||||
|
||||
[QMK Toolbox](https://github.com/qmk/qmk_toolbox) will show messages from your keyboard if you have `CONSOLE_ENABLE = yes` in your `rules.mk`. By default the output is very limited, but you can turn on debug mode to increase the amount of debug output. Use the `DEBUG` keycode in your keymap, or use the [Command](feature_command.md) feature to enable debug mode.
|
||||
|
||||
<!-- FIXME: Describe the debugging messages here. -->
|
||||
|
||||
## Sending Your Own Debug Messages
|
||||
|
||||
Sometimes it's useful to print debug messages from within your [custom code](custom_quantum_functions.md). Doing so is pretty simple. Start by including `print.h` at the top of your file:
|
||||
|
||||
#include <print.h>
|
||||
|
||||
After that you can use a few different print functions:
|
||||
|
||||
* `print("string")`: Print a simple string.
|
||||
* `sprintf("%s string", var)`: Print a formatted string
|
||||
* `dprint("string")` Print a simple string, but only when debug mode is enabled
|
||||
* `dprintf("%s string", var)`: Print a formatted string, but only when debug mode is enabled
|
||||
@ -0,0 +1 @@
|
||||
#include "1up60rgb.h"
|
||||
@ -0,0 +1,20 @@
|
||||
#ifndef KB_H
|
||||
#define KB_H
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define KEYMAP( \
|
||||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
|
||||
K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
|
||||
K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \
|
||||
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \
|
||||
K400, K401, K403, K406, K410, K411, K413, K414 \
|
||||
) { \
|
||||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \
|
||||
{ K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \
|
||||
{ K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \
|
||||
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314 }, \
|
||||
{ K400, K401, KC_NO, K403, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, KC_NO, K413, K414 } \
|
||||
}
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,58 @@
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER 1upkeyboards
|
||||
#define PRODUCT 1UP RGB Underglow PCB
|
||||
#define DESCRIPTION 60% keyboard with RGB underglow
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 15
|
||||
|
||||
/* key matrix pins */
|
||||
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
|
||||
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3, F4 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* number of backlight levels */
|
||||
#define BACKLIGHT_PIN B6
|
||||
#ifdef BACKLIGHT_PIN
|
||||
#define BACKLIGHT_LEVELS 5
|
||||
#endif
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* prevent stuck modifiers */
|
||||
#define PREVENT_STUCK_MODIFIERS
|
||||
|
||||
#define RGB_DI_PIN E2
|
||||
#ifdef RGB_DI_PIN
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 20
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
#endif
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,72 @@
|
||||
#include "1up60rgb.h"
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
KEYMAP(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT,
|
||||
KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL),
|
||||
|
||||
KEYMAP(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
|
||||
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
;
|
||||
|
||||
switch (id) {
|
||||
|
||||
}
|
||||
return MACRO_NONE;
|
||||
}
|
||||
|
||||
void matrix_init_user(void) {
|
||||
}
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
}
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
return true;
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
|
||||
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
|
||||
DDRB |= (1 << 2); PORTB &= ~(1 << 2);
|
||||
} else {
|
||||
DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_COMPOSE)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_KANA)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
}
|
||||
@ -0,0 +1,72 @@
|
||||
#include "1up60rgb.h"
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
KEYMAP(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL),
|
||||
|
||||
KEYMAP(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
|
||||
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
;
|
||||
|
||||
switch (id) {
|
||||
|
||||
}
|
||||
return MACRO_NONE;
|
||||
}
|
||||
|
||||
void matrix_init_user(void) {
|
||||
}
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
}
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
return true;
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
|
||||
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
|
||||
DDRB |= (1 << 2); PORTB &= ~(1 << 2);
|
||||
} else {
|
||||
DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_COMPOSE)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_KANA)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
}
|
||||
@ -0,0 +1,72 @@
|
||||
#include "1up60rgb.h"
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
KEYMAP(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT,
|
||||
KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, KC_RALT, KC_RGUI, KC_RCTL),
|
||||
|
||||
KEYMAP(
|
||||
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL,
|
||||
KC_TRNS, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_UP, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_RGHT, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_DOWN, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
|
||||
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
;
|
||||
|
||||
switch (id) {
|
||||
|
||||
}
|
||||
return MACRO_NONE;
|
||||
}
|
||||
|
||||
void matrix_init_user(void) {
|
||||
}
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
}
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
return true;
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
|
||||
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
|
||||
DDRB |= (1 << 2); PORTB &= ~(1 << 2);
|
||||
} else {
|
||||
DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_COMPOSE)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_KANA)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
}
|
||||
@ -0,0 +1,13 @@
|
||||
# 1upkeyboards 60% RGB
|
||||
|
||||
Firmware for custom keyboard PCB with 60% key layout.
|
||||
|
||||
Keyboard Maintainer: [rempired](https://github.com/rempired)
|
||||
Hardware Supported: 1upkeyboards 60% RGB
|
||||
Hardware Availability: [1upkeyboards](https://1upkeyboards.com/rgb-underglow-1up-pcb.html)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make 1up60rgb:default
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
||||
@ -0,0 +1,56 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= no # Commands for debug and configuration
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
AUDIO_ENABLE ?= no
|
||||
RGBLIGHT_ENABLE ?= yes
|
||||
@ -0,0 +1,31 @@
|
||||
#include "atom47.h"
|
||||
#include "led.h"
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
matrix_init_user();
|
||||
led_init_ports();
|
||||
};
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
matrix_scan_user();
|
||||
};
|
||||
|
||||
void led_init_ports(void) {
|
||||
// * Set our LED pins as output
|
||||
DDRB &= ~(1<<5);
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||
// Turn capslock on
|
||||
PORTF |= (1<<5);
|
||||
} else {
|
||||
// Turn capslock off
|
||||
PORTF &= ~(1<<5);
|
||||
}
|
||||
led_set_user(usb_led);
|
||||
}
|
||||
@ -0,0 +1,25 @@
|
||||
#ifndef ATOM47_H
|
||||
#define ATOM47_H
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
// readability
|
||||
#define XXX KC_NO
|
||||
|
||||
#define KEYMAP_ANSI( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1c, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2c, \
|
||||
k30, k31, k32, k33, k34, k36, k38, k39, k3a, k3c \
|
||||
) \
|
||||
{ \
|
||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \
|
||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \
|
||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, XXX, k2c}, \
|
||||
{k30, k31, k32, k33, k34, XXX, k36, XXX, k38, k39, k3a, XXX, k3c} \
|
||||
}
|
||||
|
||||
void matrix_init_user(void);
|
||||
void matrix_scan_user(void);
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,73 @@
|
||||
/*
|
||||
Copyright 2012 Maarten Dekkers <atomkeeb@gmail.com
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0003
|
||||
#define MANUFACTURER Vortex
|
||||
#define PRODUCT Core
|
||||
#define DESCRIPTION Atom47 PCB for the Vortex Core
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 4
|
||||
#define MATRIX_COLS 13
|
||||
|
||||
// ROWS: Top to bottom, COLS: Left to right
|
||||
|
||||
#define MATRIX_ROW_PINS {B1,B2,B3,B7}
|
||||
#define MATRIX_COL_PINS {D7,D5,F0,F1,F4,F6,F7,D4,C7,C6,D6,B5,B4}
|
||||
#define UNUSED_PINS
|
||||
|
||||
#define BACKLIGHT_PIN B6
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* Backlight configuration
|
||||
*/
|
||||
#define BACKLIGHT_LEVELS 4
|
||||
|
||||
#endif
|
||||
|
||||
#define RGB_DI_PIN D0 // The pin the LED strip is connected to
|
||||
#define RGBLED_NUM 1 // Number of LEDs in your strip
|
||||
|
||||
#define QMK_ESC_OUTPUT D7 // usually COL
|
||||
#define QMK_ESC_INPUT B1 // usually ROW
|
||||
#define QMK_LED B6
|
||||
@ -0,0 +1,31 @@
|
||||
#include "atom47.h"
|
||||
#include "led.h"
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
matrix_init_user();
|
||||
led_init_ports();
|
||||
};
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
matrix_scan_user();
|
||||
};
|
||||
|
||||
void led_init_ports(void) {
|
||||
// * Set our LED pins as output
|
||||
DDRB &= ~(1<<5);
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||
// Turn capslock on
|
||||
PORTF |= (1<<5);
|
||||
} else {
|
||||
// Turn capslock off
|
||||
PORTF &= ~(1<<5);
|
||||
}
|
||||
led_set_user(usb_led);
|
||||
}
|
||||
@ -0,0 +1,25 @@
|
||||
#ifndef ATOM47_H
|
||||
#define ATOM47_H
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
// readability
|
||||
#define XXX KC_NO
|
||||
|
||||
#define KEYMAP_ANSI( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1c, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2c, \
|
||||
k30, k31, k32, k33, k34, k36, k38, k39, k3a, k3c \
|
||||
) \
|
||||
{ \
|
||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \
|
||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \
|
||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, XXX, k2c}, \
|
||||
{k30, k31, k32, k33, k34, XXX, k36, XXX, k38, k39, k3a, XXX, k3c} \
|
||||
}
|
||||
|
||||
void matrix_init_user(void);
|
||||
void matrix_scan_user(void);
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,73 @@
|
||||
/*
|
||||
Copyright 2012 Maarten Dekkers <atomkeeb@gmail.com
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0003
|
||||
#define MANUFACTURER Vortex
|
||||
#define PRODUCT Core
|
||||
#define DESCRIPTION Atom47 PCB for the Vortex Core
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 4
|
||||
#define MATRIX_COLS 13
|
||||
|
||||
// ROWS: Top to bottom, COLS: Left to right
|
||||
|
||||
#define MATRIX_ROW_PINS {B1,B2,B3,B7}
|
||||
#define MATRIX_COL_PINS {D7,D5,F0,F1,F4,F6,F7,D4,C7,C6,D6,B5,B4}
|
||||
#define UNUSED_PINS
|
||||
|
||||
#define BACKLIGHT_PIN B6
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* Backlight configuration
|
||||
*/
|
||||
#define BACKLIGHT_LEVELS 4
|
||||
|
||||
#endif
|
||||
|
||||
#define RGB_DI_PIN D0 // The pin the LED strip is connected to
|
||||
#define RGBLED_NUM 1 // Number of LEDs in your strip
|
||||
|
||||
#define QMK_ESC_OUTPUT D7 // usually COL
|
||||
#define QMK_ESC_INPUT B1 // usually ROW
|
||||
#define QMK_LED B6
|
||||
@ -0,0 +1,65 @@
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870)
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150)
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
@ -0,0 +1,39 @@
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
|
||||
#define _MA 0 //Main layer
|
||||
#define _FN 1 //Fn
|
||||
#define _FN1 2 //Fn1
|
||||
#define _PN 3 //Pn
|
||||
|
||||
#define _______ KC_TRNS
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[_MA] = KEYMAP_ANSI(
|
||||
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, \
|
||||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, MO(_FN1), \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, MO(_PN), KC_SPC, KC_SPC, MO(_FN), KC_RALT, KC_APP, KC_RCTRL), \
|
||||
|
||||
[_FN] = KEYMAP_ANSI(
|
||||
_______, KC_VOLD, KC_VOLU, KC_MUTE, RESET, _______, KC_CALC, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, \
|
||||
KC_CAPS, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_INS, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, BL_TOGG, BL_DEC, BL_INC, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \
|
||||
|
||||
[_FN1] = KEYMAP_ANSI(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
|
||||
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \
|
||||
_______, _______, _______, _______, _______, KC_QUOT, KC_SLSH, KC_LBRC, KC_RBRC, KC_BSLS, KC_RSFT, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \
|
||||
|
||||
[_PN] = KEYMAP_ANSI(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, RESET),
|
||||
};
|
||||
@ -0,0 +1,10 @@
|
||||
To be updated...
|
||||
|
||||
|
||||
// This layer is just a blank template to be copied for easy layer creation. please don not edit it.
|
||||
|
||||
[_LX] = KEYMAP_ANSI(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, RESET),
|
||||
@ -0,0 +1,28 @@
|
||||
# ATOM47
|
||||
|
||||
|
||||
|
||||
## Support
|
||||
Keyboard Maintainer: [Matthew Kerfoot(https://github.com/mkerfoot)
|
||||
Hardware Supported: ATOM47
|
||||
Hardware Availability: [GeekHack.com Group Buy](https://geekhack.org/index.php?topic=93447.msg2545221)
|
||||
|
||||
|
||||
## Features
|
||||
QMK Firmware
|
||||
6 Underglow RGB leds
|
||||
In-switch leds
|
||||
Through-hole micro usb connector (less likely to break off!)
|
||||
South facing leds for the QMX/Zealencio users
|
||||
Multiple layouts
|
||||
Easily reachable reset button under the spacebar
|
||||
CapsLock indicator
|
||||
|
||||
## Build
|
||||
To build the default keymap, simply run `make atom47:default`.
|
||||
|
||||
For an alternative, heavily modified layout you would just need to run `make atom47:LEdiodes`.
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
||||
|
||||
|
||||
@ -0,0 +1,65 @@
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870)
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150)
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
@ -0,0 +1,31 @@
|
||||
#include "chimera_ergo.h"
|
||||
|
||||
void uart_init(void) {
|
||||
SERIAL_UART_INIT();
|
||||
}
|
||||
|
||||
void led_init(void) {
|
||||
DDRD |= (1<<1);
|
||||
PORTD |= (1<<1);
|
||||
DDRF |= (1<<4) | (1<<5);
|
||||
PORTF |= (1<<4) | (1<<5);
|
||||
}
|
||||
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
matrix_init_user();
|
||||
uart_init();
|
||||
led_init();
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
|
||||
}
|
||||
@ -0,0 +1,82 @@
|
||||
#ifndef CHIMERA_ERGO_H
|
||||
#define CHIMERA_ERGO_H
|
||||
|
||||
#include "quantum.h"
|
||||
#include "matrix.h"
|
||||
#include "backlight.h"
|
||||
#include <stddef.h>
|
||||
|
||||
#define red_led_off PORTF |= (1<<5)
|
||||
#define red_led_on PORTF &= ~(1<<5)
|
||||
#define blu_led_off PORTF |= (1<<4)
|
||||
#define blu_led_on PORTF &= ~(1<<4)
|
||||
#define grn_led_off PORTD |= (1<<1)
|
||||
#define grn_led_on PORTD &= ~(1<<1)
|
||||
|
||||
#define set_led_off red_led_off; grn_led_off; blu_led_off
|
||||
#define set_led_red red_led_on; grn_led_off; blu_led_off
|
||||
#define set_led_blue red_led_off; grn_led_off; blu_led_on
|
||||
#define set_led_green red_led_off; grn_led_on; blu_led_off
|
||||
#define set_led_yellow red_led_on; grn_led_on; blu_led_off
|
||||
#define set_led_magenta red_led_on; grn_led_off; blu_led_on
|
||||
#define set_led_cyan red_led_off; grn_led_on; blu_led_on
|
||||
#define set_led_white red_led_on; grn_led_on; blu_led_on
|
||||
|
||||
/*
|
||||
#define LED_B 5
|
||||
#define LED_R 6
|
||||
#define LED_G 7
|
||||
|
||||
#define all_leds_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
|
||||
|
||||
#define red_led_on PORTF |= (1<<LED_R)
|
||||
#define red_led_off PORTF &= ~(1<<LED_R)
|
||||
#define grn_led_on PORTF |= (1<<LED_G)
|
||||
#define grn_led_off PORTF &= ~(1<<LED_G)
|
||||
#define blu_led_on PORTF |= (1<<LED_B)
|
||||
#define blu_led_off PORTF &= ~(1<<LED_B)
|
||||
|
||||
#define set_led_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
|
||||
#define set_led_red PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_G) | (1<<LED_R)
|
||||
#define set_led_blue PORTF = PORTF & ~(1<<LED_G) & ~(1<<LED_R) | (1<<LED_B)
|
||||
#define set_led_green PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_R) | (1<<LED_G)
|
||||
#define set_led_yellow PORTF = PORTF & ~(1<<LED_B) | (1<<LED_R) | (1<<LED_G)
|
||||
#define set_led_magenta PORTF = PORTF & ~(1<<LED_G) | (1<<LED_R) | (1<<LED_B)
|
||||
#define set_led_cyan PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G)
|
||||
#define set_led_white PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G)
|
||||
*/
|
||||
|
||||
// This a shortcut to help you visually see your layout.
|
||||
// The first section contains all of the arguements
|
||||
// The second converts the arguments into a two-dimensional array
|
||||
#define KC_KEYMAP( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, \
|
||||
k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, \
|
||||
k24, k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, \
|
||||
k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47, \
|
||||
k48, k49, k50, k51 \
|
||||
) \
|
||||
{ \
|
||||
{ KC_NO, KC_NO, KC_##k26, KC_##k15, KC_##k28, KC_##k01, KC_##k42, KC_##k31, KC_##k20, KC_##k33, KC_NO, KC_NO }, \
|
||||
{ KC_##k00, KC_NO, KC_##k14, KC_##k27, KC_##k16, KC_##k36, KC_##k47, KC_##k19, KC_##k32, KC_##k21, KC_NO, KC_##k11 }, \
|
||||
{ KC_##k12, KC_##k25, KC_##k02, KC_##k39, KC_##k17, KC_##k49, KC_##k50, KC_##k18, KC_##k44, KC_##k09, KC_##k34, KC_##k23 }, \
|
||||
{ KC_##k24, KC_##k13, KC_##k38, KC_##k04, KC_##k05, KC_##k48, KC_##k51, KC_##k06, KC_##k07, KC_##k45, KC_##k22, KC_##k35 }, \
|
||||
{ KC_##k29, KC_##k41, KC_##k03, KC_##k40, KC_##k37, KC_NO, KC_##k30, KC_##k43, KC_##k08, KC_##k10, KC_##k46, KC_NO }, \
|
||||
}
|
||||
|
||||
#define KEYMAP( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, \
|
||||
k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, \
|
||||
k24, k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, \
|
||||
k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47, \
|
||||
k48, k49, k50, k51 \
|
||||
) \
|
||||
{ \
|
||||
{ KC_NO, KC_NO, k26, k15, k28, k01, k42, k31, k20, k33, KC_NO, KC_NO }, \
|
||||
{ k00, KC_NO, k14, k27, k16, k36, k47, k19, k32, k21, KC_NO, k11 }, \
|
||||
{ k12, k25, k02, k39, k17, k49, k50, k18, k44, k09, k34, k23 }, \
|
||||
{ k24, k13, k38, k04, k05, k48, k51, k06, k07, k45, k22, k35 }, \
|
||||
{ k29, k41, k03, k40, k37, KC_NO, k30, k43, k08, k10, k46, KC_NO }, \
|
||||
}
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,87 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER unknown
|
||||
#define PRODUCT Chimera Ergo
|
||||
#define DESCRIPTION q.m.k. keyboard firmware for Chimera Ergo
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 6
|
||||
#define MATRIX_COLS 12
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
//#define BACKLIGHT_LEVELS 3
|
||||
|
||||
#define ONESHOT_TIMEOUT 500
|
||||
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
#define PREVENT_STUCK_MODIFIERS
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
//UART settings for communication with the RF microcontroller
|
||||
#define SERIAL_UART_BAUD 1000000
|
||||
#define SERIAL_UART_DATA UDR1
|
||||
#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
|
||||
#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
|
||||
#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
|
||||
#define SERIAL_UART_INIT() do { \
|
||||
/* baud rate */ \
|
||||
UBRR1L = SERIAL_UART_UBRR; \
|
||||
/* baud rate */ \
|
||||
UBRR1H = SERIAL_UART_UBRR >> 8; \
|
||||
/* enable TX and RX */ \
|
||||
UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
|
||||
/* 8-bit data */ \
|
||||
UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
|
||||
} while(0)
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,206 @@
|
||||
// this is the style you want to emulate.
|
||||
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
|
||||
|
||||
#include "chimera_ergo.h"
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
enum chimera_ergo_layers
|
||||
{
|
||||
_QWERTY,
|
||||
_CAPS,
|
||||
_NUMPAD,
|
||||
_SYMBOLS,
|
||||
_MACROS,
|
||||
_NAV
|
||||
};
|
||||
|
||||
#define KC_NMPD TG(_NUMPAD)
|
||||
#define KC_SYMB TG(_SYMBOLS)
|
||||
#define KC_SPFN LT(_NAV,KC_EQL)
|
||||
#define KC_SCTL MT(MOD_LCTL, KC_LBRC)
|
||||
#define KC_SCTR MT(MOD_LCTL, KC_RBRC)
|
||||
#define KC_SPLT MT(MOD_LALT, KC_MINS)
|
||||
#define KC_SPRT MT(MOD_LALT, KC_1)
|
||||
#define KC_GBRC MT(MOD_RGUI, KC_RBRC)
|
||||
#define KC_GQOT MT(MOD_LGUI, KC_QUOT)
|
||||
#define KC_MESC LT(_MACROS, KC_ESC)
|
||||
#define KC_INCL M(0)
|
||||
#define KC_PULL M(1)
|
||||
#define KC_PUSH M(2)
|
||||
#define KC_SCAP M(3)
|
||||
#define KC_SCOF M(4)
|
||||
#define KC_CAD LALT(LCTL(KC_DEL))
|
||||
|
||||
#define LONGPRESS_DELAY 150
|
||||
//#define LAYER_TOGGLE_DELAY 300
|
||||
|
||||
// Fillers to make layering more clear
|
||||
#define _______ KC_TRNS
|
||||
#define XXXXXXX KC_NO
|
||||
#define KC_ KC_TRNS
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_QWERTY] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
LBRC, 1 ,SCTL,SPLT,SPFN, 5 , 6 ,GBRC,SPRT,SCTR, 0 ,RBRC,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
MESC, Q , W , E , R , T , Y , U , I , O , P ,QUOT,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
TAB , A , S , D , F , G , H , J , K , L ,SCLN,ENT ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
LSPO, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH,RSPC,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
NMPD,BSPC, SPC ,SYMB
|
||||
// \------------------+----+----/ \---+----+----+--------------/
|
||||
),
|
||||
|
||||
[_CAPS] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
,UNDS, , , , , , , , , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , , , , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , , , ,COLN, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
SCOF, , , , , , , , , , ,SCOF,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , ,
|
||||
// \------------------+----+----/ \---+----+----+--------------/
|
||||
),
|
||||
|
||||
[_NUMPAD] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, , , , , , , , , ,MINS, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, ,COLN, , , , , 7 , 8 , 9 ,ASTR, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, ,DOT , , , , , 4 , 5 , 6 ,PLUS, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , 1 , 2 , 3 ,SLSH, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , 0
|
||||
// \------------------+----+----/ \---+----+----+--------------/
|
||||
),
|
||||
|
||||
[_SYMBOLS] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, , , , , , , , , , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN,BSLS,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
F1 , F2 , F3 , F4 , F5 , F6 , TILD,EQL ,UNDS,LCBR,RCBR, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
F7 , F8 , F9 ,F10 ,F11 ,F12 , GRV ,PLUS,MINS,LBRC,RBRC, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
PIPE, , ,
|
||||
// \------------------+----+----/ \---+----+----+--------------/
|
||||
),
|
||||
|
||||
[_MACROS] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, , , , , , , , , , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , ,INCL, , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , ,CAD , , , , , , , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
SCAP, , , , , , , ,PULL,PUSH, , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , ,
|
||||
// \------------------+----+----/ \---+----+----+--------------/
|
||||
),
|
||||
|
||||
[_NAV] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, , , , , , , , , , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , ,PGUP, UP ,PGDN,PSCR, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , ,LEFT,DOWN,RGHT, , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , , , , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
,DEL , ,
|
||||
// \------------------+----+----/ \---+----+----+--------------/
|
||||
),
|
||||
|
||||
|
||||
};
|
||||
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
switch(id) {
|
||||
/* include some kind of library or header */
|
||||
case 0:
|
||||
if (record->event.pressed) {
|
||||
SEND_STRING("#include <>");
|
||||
return MACRO( T(LEFT), END);
|
||||
}
|
||||
break;
|
||||
case 1:
|
||||
if (record->event.pressed) {
|
||||
SEND_STRING("git pull");
|
||||
return MACRO( T(ENT), END );
|
||||
}
|
||||
break;
|
||||
case 2:
|
||||
if (record->event.pressed){
|
||||
SEND_STRING("git push");
|
||||
return MACRO( T(ENT), END );
|
||||
}
|
||||
break;
|
||||
case 3:
|
||||
if (record->event.pressed){
|
||||
layer_on(_CAPS);
|
||||
register_code(KC_CAPSLOCK);
|
||||
unregister_code(KC_CAPSLOCK);
|
||||
}
|
||||
break;
|
||||
case 4:
|
||||
if (record->event.pressed){
|
||||
layer_off(_CAPS);
|
||||
register_code(KC_CAPSLOCK);
|
||||
unregister_code(KC_CAPSLOCK);
|
||||
}
|
||||
break;
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
uint8_t layer = biton32(layer_state);
|
||||
|
||||
switch (layer) {
|
||||
case _QWERTY:
|
||||
set_led_green;
|
||||
break;
|
||||
case _CAPS:
|
||||
set_led_white;
|
||||
break;
|
||||
case _NUMPAD:
|
||||
set_led_blue;
|
||||
break;
|
||||
case _SYMBOLS:
|
||||
set_led_red;
|
||||
break;
|
||||
case _NAV:
|
||||
set_led_magenta;
|
||||
break;
|
||||
case _MACROS:
|
||||
set_led_cyan;
|
||||
break;
|
||||
default:
|
||||
set_led_green;
|
||||
break;
|
||||
}
|
||||
};
|
||||
@ -0,0 +1,164 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako
|
||||
Copyright 2014 Jack Humbert
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#if defined(__AVR__)
|
||||
#include <avr/io.h>
|
||||
#endif
|
||||
#include "wait.h"
|
||||
#include "print.h"
|
||||
#include "debug.h"
|
||||
#include "util.h"
|
||||
#include "matrix.h"
|
||||
#include "timer.h"
|
||||
|
||||
#if (MATRIX_COLS <= 8)
|
||||
# define print_matrix_header() print("\nr/c 01234567\n")
|
||||
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
|
||||
# define matrix_bitpop(i) bitpop(matrix[i])
|
||||
# define ROW_SHIFTER ((uint8_t)1)
|
||||
#elif (MATRIX_COLS <= 16)
|
||||
# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
|
||||
# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
|
||||
# define matrix_bitpop(i) bitpop16(matrix[i])
|
||||
# define ROW_SHIFTER ((uint16_t)1)
|
||||
#elif (MATRIX_COLS <= 32)
|
||||
# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
|
||||
# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
|
||||
# define matrix_bitpop(i) bitpop32(matrix[i])
|
||||
# define ROW_SHIFTER ((uint32_t)1)
|
||||
#endif
|
||||
|
||||
/* matrix state(1:on, 0:off) */
|
||||
static matrix_row_t matrix[MATRIX_ROWS];
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_init_quantum(void) {
|
||||
matrix_init_kb();
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_quantum(void) {
|
||||
matrix_scan_kb();
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_init_kb(void) {
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_kb(void) {
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_init_user(void) {
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_user(void) {
|
||||
}
|
||||
|
||||
inline
|
||||
uint8_t matrix_rows(void) {
|
||||
return MATRIX_ROWS;
|
||||
}
|
||||
|
||||
inline
|
||||
uint8_t matrix_cols(void) {
|
||||
return MATRIX_COLS;
|
||||
}
|
||||
|
||||
void matrix_init(void) {
|
||||
|
||||
matrix_init_quantum();
|
||||
}
|
||||
|
||||
uint8_t matrix_scan(void)
|
||||
{
|
||||
SERIAL_UART_INIT();
|
||||
|
||||
uint32_t timeout = 0;
|
||||
|
||||
//the s character requests the RF slave to send the matrix
|
||||
SERIAL_UART_DATA = 's';
|
||||
|
||||
//trust the external keystates entirely, erase the last data
|
||||
uint8_t uart_data[14] = {0};
|
||||
|
||||
//there are 10 bytes corresponding to 10 columns, and an end byte
|
||||
for (uint8_t i = 0; i < 14; i++) {
|
||||
//wait for the serial data, timeout if it's been too long
|
||||
//this only happened in testing with a loose wire, but does no
|
||||
//harm to leave it in here
|
||||
while(!SERIAL_UART_RXD_PRESENT){
|
||||
timeout++;
|
||||
if (timeout > 10000){
|
||||
break;
|
||||
}
|
||||
}
|
||||
uart_data[i] = SERIAL_UART_DATA;
|
||||
}
|
||||
|
||||
//check for the end packet, the key state bytes use the LSBs, so 0xE0
|
||||
//will only show up here if the correct bytes were recieved
|
||||
if (uart_data[10] == 0xE0)
|
||||
{
|
||||
//shifting and transferring the keystates to the QMK matrix variable
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 6;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
matrix_scan_quantum();
|
||||
return 1;
|
||||
}
|
||||
|
||||
inline
|
||||
bool matrix_is_on(uint8_t row, uint8_t col)
|
||||
{
|
||||
return (matrix[row] & ((matrix_row_t)1<col));
|
||||
}
|
||||
|
||||
inline
|
||||
matrix_row_t matrix_get_row(uint8_t row)
|
||||
{
|
||||
return matrix[row];
|
||||
}
|
||||
|
||||
void matrix_print(void)
|
||||
{
|
||||
print_matrix_header();
|
||||
|
||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
|
||||
phex(row); print(": ");
|
||||
print_matrix_row(row);
|
||||
print("\n");
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t matrix_key_count(void)
|
||||
{
|
||||
uint8_t count = 0;
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
count += matrix_bitpop(i);
|
||||
}
|
||||
return count;
|
||||
}
|
||||
@ -0,0 +1,19 @@
|
||||
# Chimera Ergo
|
||||
|
||||
|
||||
|
||||
A split wireless 40% ergonomic keyboard
|
||||
|
||||
Keyboard Maintainer: [William Wilson](https://github.com/GlenPickle)
|
||||
|
||||
|
||||
Hardware Supported: Chimera Ergo PCB, WaveShare core nRF51822
|
||||
|
||||
Hardware Availability: [Gerbers](https://github.com/GlenPickle/Chimera/tree/master/ergo/gerbers)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make chimera_ergo:default
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
||||
|
||||
@ -0,0 +1,82 @@
|
||||
|
||||
OPT_DEFS += -DCHIMERA_ERGO_PROMICRO
|
||||
CHIMERA_ERGO_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
|
||||
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
|
||||
|
||||
# # project specific files
|
||||
SRC = matrix.c
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Bootloader
|
||||
# This definition is optional, and if your keyboard supports multiple bootloaders of
|
||||
# different sizes, comment this out, and the correct address will be loaded
|
||||
# automatically (+60). See bootloader.mk for all options.
|
||||
BOOTLOADER = caterina
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
|
||||
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
# MIDI_ENABLE = YES # MIDI controls
|
||||
UNICODE_ENABLE = YES # Unicode
|
||||
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
USB = /dev/ttyACM0
|
||||
@ -0,0 +1,31 @@
|
||||
#include "chimera_ls.h"
|
||||
|
||||
void uart_init(void) {
|
||||
SERIAL_UART_INIT();
|
||||
}
|
||||
|
||||
void led_init(void) {
|
||||
DDRD |= (1<<1);
|
||||
PORTD |= (1<<1);
|
||||
DDRF |= (1<<4) | (1<<5);
|
||||
PORTF |= (1<<4) | (1<<5);
|
||||
}
|
||||
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
matrix_init_user();
|
||||
uart_init();
|
||||
led_init();
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
|
||||
}
|
||||
@ -0,0 +1,82 @@
|
||||
#ifndef CHIMERA_LETS_SPLIT_H
|
||||
#define CHIMERA_LETS_SPLIT_H
|
||||
|
||||
#include "quantum.h"
|
||||
#include "matrix.h"
|
||||
#include "backlight.h"
|
||||
#include <stddef.h>
|
||||
|
||||
#define red_led_off PORTF |= (1<<5)
|
||||
#define red_led_on PORTF &= ~(1<<5)
|
||||
#define blu_led_off PORTF |= (1<<4)
|
||||
#define blu_led_on PORTF &= ~(1<<4)
|
||||
#define grn_led_off PORTD |= (1<<1)
|
||||
#define grn_led_on PORTD &= ~(1<<1)
|
||||
|
||||
#define set_led_off red_led_off; grn_led_off; blu_led_off
|
||||
#define set_led_red red_led_on; grn_led_off; blu_led_off
|
||||
#define set_led_blue red_led_off; grn_led_off; blu_led_on
|
||||
#define set_led_green red_led_off; grn_led_on; blu_led_off
|
||||
#define set_led_yellow red_led_on; grn_led_on; blu_led_off
|
||||
#define set_led_magenta red_led_on; grn_led_off; blu_led_on
|
||||
#define set_led_cyan red_led_off; grn_led_on; blu_led_on
|
||||
#define set_led_white red_led_on; grn_led_on; blu_led_on
|
||||
|
||||
/*
|
||||
#define LED_B 5
|
||||
#define LED_R 6
|
||||
#define LED_G 7
|
||||
|
||||
#define all_leds_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
|
||||
|
||||
#define red_led_on PORTF |= (1<<LED_R)
|
||||
#define red_led_off PORTF &= ~(1<<LED_R)
|
||||
#define grn_led_on PORTF |= (1<<LED_G)
|
||||
#define grn_led_off PORTF &= ~(1<<LED_G)
|
||||
#define blu_led_on PORTF |= (1<<LED_B)
|
||||
#define blu_led_off PORTF &= ~(1<<LED_B)
|
||||
|
||||
#define set_led_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
|
||||
#define set_led_red PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_G) | (1<<LED_R)
|
||||
#define set_led_blue PORTF = PORTF & ~(1<<LED_G) & ~(1<<LED_R) | (1<<LED_B)
|
||||
#define set_led_green PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_R) | (1<<LED_G)
|
||||
#define set_led_yellow PORTF = PORTF & ~(1<<LED_B) | (1<<LED_R) | (1<<LED_G)
|
||||
#define set_led_magenta PORTF = PORTF & ~(1<<LED_G) | (1<<LED_R) | (1<<LED_B)
|
||||
#define set_led_cyan PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G)
|
||||
#define set_led_white PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G)
|
||||
*/
|
||||
|
||||
// This a shortcut to help you visually see your layout.
|
||||
// The first section contains all of the arguements
|
||||
// The second converts the arguments into a two-dimensional array
|
||||
|
||||
#define KC_KEYMAP( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, \
|
||||
k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, \
|
||||
k24, k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, \
|
||||
k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47 \
|
||||
) \
|
||||
{ \
|
||||
{ KC_##k43, KC_##k45, KC_##k34, KC_##k11, KC_##k23, KC_##k40, KC_##k38, KC_##k25, KC_##k00, KC_##k12 }, \
|
||||
{ KC_##k31, KC_##k44, KC_##k46, KC_##k35, KC_##k22, KC_##k28, KC_##k39, KC_##k37, KC_##k24, KC_##k13 }, \
|
||||
{ KC_##k30, KC_##k32, KC_##k33, KC_##k47, KC_##k09, KC_##k29, KC_##k27, KC_##k26, KC_##k36, KC_##k02 }, \
|
||||
{ KC_##k19, KC_##k20, KC_##k21, KC_##k42, KC_##k18, KC_##k16, KC_##k15, KC_##k14, KC_##k41, KC_##k17 }, \
|
||||
{ KC_##k06, KC_##k07, KC_##k08, KC_##k10, KC_NO, KC_##k05, KC_##k04, KC_##k03, KC_##k01, KC_NO }, \
|
||||
}
|
||||
|
||||
#define KEYMAP( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, \
|
||||
k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, \
|
||||
k24, k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, \
|
||||
k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47 \
|
||||
) \
|
||||
{ \
|
||||
{ k43, k45, k34, k11, k23, k40, k38, k25, k00, k12 }, \
|
||||
{ k31, k44, k46, k35, k22, k28, k39, k37, k24, k13 }, \
|
||||
{ k30, k32, k33, k47, k09, k29, k27, k26, k36, k02 }, \
|
||||
{ k19, k20, k21, k42, k18, k16, k15, k14, k41, k17 }, \
|
||||
{ k06, k07, k08, k10, KC_NO, k05, k04, k03, k01, KC_NO }, \
|
||||
}
|
||||
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,87 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER unknown
|
||||
#define PRODUCT Chimera Lets Split
|
||||
#define DESCRIPTION q.m.k. keyboard firmware for Chimera Lets Split
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 12
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
//#define BACKLIGHT_LEVELS 3
|
||||
|
||||
#define ONESHOT_TIMEOUT 500
|
||||
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
#define PREVENT_STUCK_MODIFIERS
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
//UART settings for communication with the RF microcontroller
|
||||
#define SERIAL_UART_BAUD 1000000
|
||||
#define SERIAL_UART_DATA UDR1
|
||||
#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
|
||||
#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
|
||||
#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
|
||||
#define SERIAL_UART_INIT() do { \
|
||||
/* baud rate */ \
|
||||
UBRR1L = SERIAL_UART_UBRR; \
|
||||
/* baud rate */ \
|
||||
UBRR1H = SERIAL_UART_UBRR >> 8; \
|
||||
/* enable TX and RX */ \
|
||||
UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
|
||||
/* 8-bit data */ \
|
||||
UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
|
||||
} while(0)
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,191 @@
|
||||
// this is the style you want to emulate.
|
||||
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
|
||||
|
||||
#include "chimera_ls.h"
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
enum chimera_lets_split_layers
|
||||
{
|
||||
_QWERTY,
|
||||
_CAPS,
|
||||
_NUMPAD,
|
||||
_SYMBOLS,
|
||||
_MACROS,
|
||||
_NAV
|
||||
};
|
||||
|
||||
#define KC_NMPD TG(_NUMPAD)
|
||||
#define KC_SYMB TG(_SYMBOLS)
|
||||
#define KC_SPFN LT(_NAV,KC_EQL)
|
||||
#define KC_SCTL MT(MOD_LCTL, KC_BSLS)
|
||||
#define KC_SCTR MT(MOD_LCTL, KC_RBRC)
|
||||
#define KC_SPLT MT(MOD_LALT, KC_MINS)
|
||||
#define KC_MESC LT(_MACROS, KC_ESC)
|
||||
#define KC_INCL M(0)
|
||||
#define KC_PULL M(1)
|
||||
#define KC_PUSH M(2)
|
||||
#define KC_SCAP M(3)
|
||||
#define KC_SCOF M(4)
|
||||
#define KC_CAD LALT(LCTL(KC_DEL))
|
||||
|
||||
#define LONGPRESS_DELAY 150
|
||||
//#define LAYER_TOGGLE_DELAY 300
|
||||
|
||||
// Fillers to make layering more clear
|
||||
#define _______ KC_TRNS
|
||||
#define XXXXXXX KC_NO
|
||||
#define KC_ KC_TRNS
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_QWERTY] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
MESC, Q , W , E , R , T , Y , U , I , O , P ,BSPC,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
TAB , A , S , D , F , G , H , J , K , L ,SCLN, ENT,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
LSPO, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH,RSPC,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
SCTL,SPFN,SPLT,AMPR,NMPD,SPC , SPC ,SYMB,ASTR,EXLM,LBRC,SCTR
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_CAPS] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, , , , , , , , , , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , , , ,COLN, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , , , , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, ,UNDS, , , , , , , , ,
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
|
||||
[_NUMPAD] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, , , , , , , 7 , 8 , 9 ,MINS,QUOT,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , 4 , 5 , 6 ,PLUS, ENT,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
LSFT, , , , , , , 1 , 2 , 3 ,ASTR, EQL,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , ,BSPC, SPC , 0 , 0 , DOT,SLSH,
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_SYMBOLS] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN,QUOT,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
F1 , F2 , F3 , F4 , F5 , F6 , TILD,EQL ,UNDS,LCBR,RCBR,PIPE,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
F7 , F8 , F9 , F10, F11, F12, GRV ,PLUS,MINS,LBRC,RBRC,BSLS,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , NO ,BSPC, SPC , , , , ,
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_NAV] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, , , , DEL,BSPC, ,HOME, UP , END, INS,PSCR,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , ,LSFT,LCTL, ENT, ,LEFT,DOWN,RGHT, DEL, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , ,PGUP,PGDN, , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , ,DEL , , , , , ,
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_MACROS] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, , , , , , , ,INCL, , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , ,CAD , , , , , , , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
SCAP, , , , , , , ,PULL,PUSH, ,SCAP,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , , , , ,
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
};
|
||||
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
switch(id) {
|
||||
/* include some kind of library or header */
|
||||
case 0:
|
||||
if (record->event.pressed) {
|
||||
SEND_STRING("#include <>");
|
||||
return MACRO( T(LEFT), END);
|
||||
}
|
||||
break;
|
||||
case 1:
|
||||
if (record->event.pressed) {
|
||||
SEND_STRING("git pull");
|
||||
return MACRO( T(ENT), END );
|
||||
}
|
||||
break;
|
||||
case 2:
|
||||
if (record->event.pressed){
|
||||
SEND_STRING("git push");
|
||||
return MACRO( T(ENT), END );
|
||||
}
|
||||
break;
|
||||
case 3:
|
||||
if (record->event.pressed){
|
||||
layer_on(_CAPS);
|
||||
register_code(KC_CAPSLOCK);
|
||||
unregister_code(KC_CAPSLOCK);
|
||||
}
|
||||
break;
|
||||
case 4:
|
||||
if (record->event.pressed){
|
||||
layer_off(_CAPS);
|
||||
register_code(KC_CAPSLOCK);
|
||||
unregister_code(KC_CAPSLOCK);
|
||||
}
|
||||
break;
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
uint8_t layer = biton32(layer_state);
|
||||
|
||||
switch (layer) {
|
||||
case _QWERTY:
|
||||
set_led_green;
|
||||
break;
|
||||
case _CAPS:
|
||||
set_led_white;
|
||||
break;
|
||||
case _NUMPAD:
|
||||
set_led_blue;
|
||||
break;
|
||||
case _SYMBOLS:
|
||||
set_led_red;
|
||||
break;
|
||||
case _NAV:
|
||||
set_led_magenta;
|
||||
break;
|
||||
case _MACROS:
|
||||
set_led_cyan;
|
||||
break;
|
||||
default:
|
||||
set_led_green;
|
||||
break;
|
||||
}
|
||||
};
|
||||
@ -0,0 +1,168 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako
|
||||
Copyright 2014 Jack Humbert
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#if defined(__AVR__)
|
||||
#include <avr/io.h>
|
||||
#endif
|
||||
#include "wait.h"
|
||||
#include "print.h"
|
||||
#include "debug.h"
|
||||
#include "util.h"
|
||||
#include "matrix.h"
|
||||
#include "timer.h"
|
||||
|
||||
#if (MATRIX_COLS <= 8)
|
||||
# define print_matrix_header() print("\nr/c 01234567\n")
|
||||
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
|
||||
# define matrix_bitpop(i) bitpop(matrix[i])
|
||||
# define ROW_SHIFTER ((uint8_t)1)
|
||||
#elif (MATRIX_COLS <= 16)
|
||||
# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
|
||||
# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
|
||||
# define matrix_bitpop(i) bitpop16(matrix[i])
|
||||
# define ROW_SHIFTER ((uint16_t)1)
|
||||
#elif (MATRIX_COLS <= 32)
|
||||
# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
|
||||
# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
|
||||
# define matrix_bitpop(i) bitpop32(matrix[i])
|
||||
# define ROW_SHIFTER ((uint32_t)1)
|
||||
#elif (MATRIX_COLS <= 64)
|
||||
# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF0123456789ABCDEF\n")
|
||||
# define print_matrix_row(row) print_bin_reverse64(matrix_get_row(row))
|
||||
# define matrix_bitpop(i) bitpop64(matrix[i])
|
||||
# define ROW_SHIFTER ((uint64_t)1)
|
||||
#endif
|
||||
|
||||
/* matrix state(1:on, 0:off) */
|
||||
static matrix_row_t matrix[MATRIX_ROWS];
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_init_quantum(void) {
|
||||
matrix_init_kb();
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_quantum(void) {
|
||||
matrix_scan_kb();
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_init_kb(void) {
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_kb(void) {
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_init_user(void) {
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_user(void) {
|
||||
}
|
||||
|
||||
inline
|
||||
uint8_t matrix_rows(void) {
|
||||
return MATRIX_ROWS;
|
||||
}
|
||||
|
||||
inline
|
||||
uint8_t matrix_cols(void) {
|
||||
return MATRIX_COLS;
|
||||
}
|
||||
|
||||
void matrix_init(void) {
|
||||
matrix_init_quantum();
|
||||
}
|
||||
|
||||
uint8_t matrix_scan(void)
|
||||
{
|
||||
SERIAL_UART_INIT();
|
||||
|
||||
uint32_t timeout = 0;
|
||||
|
||||
//the s character requests the RF slave to send the matrix
|
||||
SERIAL_UART_DATA = 's';
|
||||
|
||||
//trust the external keystates entirely, erase the last data
|
||||
uint8_t uart_data[11] = {0};
|
||||
|
||||
//there are 10 bytes corresponding to 10 columns, and an end byte
|
||||
for (uint8_t i = 0; i < 11; i++) {
|
||||
//wait for the serial data, timeout if it's been too long
|
||||
//this only happened in testing with a loose wire, but does no
|
||||
//harm to leave it in here
|
||||
while(!SERIAL_UART_RXD_PRESENT){
|
||||
timeout++;
|
||||
if (timeout > 10000){
|
||||
break;
|
||||
}
|
||||
}
|
||||
uart_data[i] = SERIAL_UART_DATA;
|
||||
}
|
||||
|
||||
//check for the end packet, the key state bytes use the LSBs, so 0xE0
|
||||
//will only show up here if the correct bytes were recieved
|
||||
if (uart_data[10] == 0xE0)
|
||||
{
|
||||
//shifting and transferring the keystates to the QMK matrix variable
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
matrix_scan_quantum();
|
||||
return 1;
|
||||
}
|
||||
|
||||
inline
|
||||
bool matrix_is_on(uint8_t row, uint8_t col)
|
||||
{
|
||||
return (matrix[row] & ((matrix_row_t)1<col));
|
||||
}
|
||||
|
||||
inline
|
||||
matrix_row_t matrix_get_row(uint8_t row)
|
||||
{
|
||||
return matrix[row];
|
||||
}
|
||||
|
||||
void matrix_print(void)
|
||||
{
|
||||
print_matrix_header();
|
||||
|
||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
|
||||
phex(row); print(": ");
|
||||
print_matrix_row(row);
|
||||
print("\n");
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t matrix_key_count(void)
|
||||
{
|
||||
uint8_t count = 0;
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
count += matrix_bitpop(i);
|
||||
}
|
||||
return count;
|
||||
}
|
||||
@ -0,0 +1,19 @@
|
||||
# Chimera LS
|
||||
|
||||
|
||||
|
||||
A wireless version of the let's split: a split 40% ortholinear keyboard
|
||||
|
||||
Keyboard Maintainer: [William Wilson](https://github.com/GlenPickle)
|
||||
|
||||
|
||||
Hardware Supported: Chimera LS PCB, WaveShare core nRF51822
|
||||
|
||||
Hardware Availability: [Gerbers](https://github.com/GlenPickle/Chimera/tree/master/ls/gerbers)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make chimera_ls:default
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
||||
|
||||
@ -0,0 +1,82 @@
|
||||
|
||||
OPT_DEFS += -DCHIMERA_LS_PROMICRO
|
||||
CHIMERA_LS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
|
||||
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
|
||||
|
||||
# # project specific files
|
||||
SRC = matrix.c
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Bootloader
|
||||
# This definition is optional, and if your keyboard supports multiple bootloaders of
|
||||
# different sizes, comment this out, and the correct address will be loaded
|
||||
# automatically (+60). See bootloader.mk for all options.
|
||||
BOOTLOADER = caterina
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
|
||||
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
# MIDI_ENABLE = YES # MIDI controls
|
||||
UNICODE_ENABLE = YES # Unicode
|
||||
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
USB = /dev/ttyACM0
|
||||
@ -0,0 +1,14 @@
|
||||
Chocopad
|
||||
========
|
||||
|
||||
A 4x4 macropad keyboard using Kailh PG1350 Lower Profile Choc switches.
|
||||
|
||||
Keyboard Maintainer: Keebio
|
||||
Hardware Supported: Chocopad PCB, Arduino Pro Micro
|
||||
Hardware Availability: [Keebio](https://keeb.io)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make chocopad:default
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
||||
@ -0,0 +1 @@
|
||||
#include "chocopad.h"
|
||||
@ -0,0 +1,32 @@
|
||||
#ifndef CHOCOPAD_H
|
||||
#define CHOCOPAD_H
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define KEYMAP( \
|
||||
A1, A2, A3, A4, \
|
||||
B1, B2, B3, B4, \
|
||||
C1, C2, C3, C4, \
|
||||
D1, D2, D3, D4 \
|
||||
) { \
|
||||
{ A1, A2, A3, A4 }, \
|
||||
{ B1, B2, B3, B4 }, \
|
||||
{ C1, C2, C3, C4 }, \
|
||||
{ D1, D2, D3, D4 } \
|
||||
}
|
||||
|
||||
// Used to create a keymap using only KC_ prefixed keys
|
||||
#define KC_KEYMAP( \
|
||||
A1, A2, A3, A4, \
|
||||
B1, B2, B3, B4, \
|
||||
C1, C2, C3, C4, \
|
||||
D1, D2, D3, D4 \
|
||||
) \
|
||||
KEYMAP( \
|
||||
KC_##A1, KC_##A2, KC_##A3, KC_##A4, \
|
||||
KC_##B1, KC_##B2, KC_##B3, KC_##B4, \
|
||||
KC_##C1, KC_##C2, KC_##C3, KC_##C4, \
|
||||
KC_##D1, KC_##D2, KC_##D3, KC_##D4 \
|
||||
)
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,59 @@
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xCEEB
|
||||
#define PRODUCT_ID 0x1144
|
||||
#define DEVICE_VER 0x0100
|
||||
#define MANUFACTURER Keebio
|
||||
#define PRODUCT Chocopad
|
||||
#define DESCRIPTION 4x4 macropad using Kailh Choc low-profile switches
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 4
|
||||
#define MATRIX_COLS 4
|
||||
|
||||
/* key matrix pins */
|
||||
#define MATRIX_ROW_PINS { D7, E6, B3, B2 }
|
||||
#define MATRIX_COL_PINS { D2, D4, F6, F5 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* number of backlight levels */
|
||||
#define BACKLIGHT_PIN B5
|
||||
#define BACKLIGHT_LEVELS 6
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* prevent stuck modifiers */
|
||||
#define PREVENT_STUCK_MODIFIERS
|
||||
|
||||
|
||||
#ifdef RGB_DI_PIN
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
#endif
|
||||
#define RGB_DI_PIN D3
|
||||
#define RGBLIGHT_TIMER
|
||||
#define RGBLED_NUM 4
|
||||
#define ws2812_PORTREG PORTD
|
||||
#define ws2812_DDRREG DDRD
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,6 @@
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "../../config.h"
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,61 @@
|
||||
#include "chocopad.h"
|
||||
|
||||
#define _BASE 0
|
||||
#define _FN1 1
|
||||
#define _FN2 2
|
||||
|
||||
#define KC_ KC_TRNS
|
||||
#define _______ KC_TRNS
|
||||
|
||||
#define KC_X1 MO(_FN1)
|
||||
#define KC_X2 MO(_FN2)
|
||||
#define KC_RST RESET
|
||||
#define KC_BSTP BL_STEP
|
||||
#define KC_RTOG RGB_TOG
|
||||
#define KC_RMOD RGB_MOD
|
||||
#define KC_RHUI RGB_HUI
|
||||
#define KC_RHUD RGB_HUD
|
||||
#define KC_RSAI RGB_SAI
|
||||
#define KC_RSAD RGB_SAD
|
||||
#define KC_RVAI RGB_VAI
|
||||
#define KC_RVAD RGB_VAD
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_BASE] = KC_KEYMAP(
|
||||
//,----+----+----+----.
|
||||
PGUP,HOME, UP ,END ,
|
||||
//|----+----+----+----|
|
||||
PGDN,LEFT,DOWN,RGHT,
|
||||
//|----+----+----+----|
|
||||
X2 ,VOLU,MPLY,MPRV,
|
||||
//|----+----+----+----|
|
||||
X1 ,VOLD,MUTE,MNXT
|
||||
//`----+----+----+----'
|
||||
),
|
||||
|
||||
[_FN1] = KC_KEYMAP(
|
||||
//,----+----+----+----.
|
||||
ESC , P7 , P8 , P9 ,
|
||||
//|----+----+----+----|
|
||||
TAB , P4 , P5 , P6 ,
|
||||
//|----+----+----+----|
|
||||
ENT , P1 , P2 , P3 ,
|
||||
//|----+----+----+----|
|
||||
, P0 , P0 ,DOT
|
||||
//`----+----+----+----'
|
||||
),
|
||||
|
||||
[_FN2] = KC_KEYMAP(
|
||||
//,----+----+----+----.
|
||||
RTOG,RHUI,RSAI,RVAI,
|
||||
//|----+----+----+----|
|
||||
RMOD,RHUD,RSAD,RVAD,
|
||||
//|----+----+----+----|
|
||||
, , ,RST ,
|
||||
//|----+----+----+----|
|
||||
BSTP, , ,
|
||||
//`----+----+----+----'
|
||||
)
|
||||
|
||||
};
|
||||
@ -0,0 +1,56 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
AUDIO_ENABLE = no
|
||||
RGBLIGHT_ENABLE = yes
|
||||
@ -0,0 +1,134 @@
|
||||
#include "60.h"
|
||||
|
||||
#define _______ KC_TRNS
|
||||
|
||||
enum keyboard_layers {
|
||||
_BL,
|
||||
_FL,
|
||||
_CL,
|
||||
_YF
|
||||
};
|
||||
|
||||
enum custom_keycodes {
|
||||
S_BSKTC = SAFE_RANGE,
|
||||
S_ODEJY,
|
||||
S_RCKBY,
|
||||
S_DOEDR,
|
||||
S_SCALE,
|
||||
S_ONEUP,
|
||||
S_COIN,
|
||||
S_SONIC,
|
||||
S_ZELDA
|
||||
};
|
||||
|
||||
#ifdef AUDIO_ENABLE
|
||||
float song_basketcase[][2] = SONG(BASKET_CASE);
|
||||
float song_ode_to_joy[][2] = SONG(ODE_TO_JOY);
|
||||
float song_rock_a_bye_baby[][2] = SONG(ROCK_A_BYE_BABY);
|
||||
float song_doe_a_deer[][2] = SONG(DOE_A_DEER);
|
||||
float song_scale[][2] = SONG(MUSIC_SCALE_SOUND);
|
||||
float song_coin[][2] = SONG(COIN_SOUND);
|
||||
float song_one_up[][2] = SONG(ONE_UP_SOUND);
|
||||
float song_sonic_ring[][2] = SONG(SONIC_RING);
|
||||
float song_zelda_puzzle[][2] = SONG(ZELDA_PUZZLE);
|
||||
#endif
|
||||
|
||||
const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Layer 0: Default Layer
|
||||
* ,-----------------------------------------------------------------.
|
||||
* |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| `|BSp|
|
||||
* |-----------------------------------------------------------------|
|
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
|
||||
* |-----------------------------------------------------------------|
|
||||
* |MT(CTL, ESC)| A| S| D| F| G| H| J| K| L| ;| '|Enter |
|
||||
* |-----------------------------------------------------------------|
|
||||
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn0|
|
||||
* |-----------------------------------------------------------------'
|
||||
* |Ctrl |Alt|Gui | Space |Alt |Gui|Fn |Ctrl |
|
||||
* `-----------------------------------------------------------------'
|
||||
*/
|
||||
[_BL] = KEYMAP(
|
||||
KC_GESC,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_GRV, KC_BSPC,\
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS, \
|
||||
MT(MOD_LCTL, KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_NUHS, KC_ENT, \
|
||||
KC_LSFT, KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, MO(_YF), \
|
||||
KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL),
|
||||
[_FL] = KEYMAP(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,_______,\
|
||||
_______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
|
||||
_______, _______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
|
||||
_______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, MO(_YF), \
|
||||
_______,_______,_______, _______, _______, _______, MO(_FL), _______),
|
||||
[_CL] = KEYMAP(
|
||||
BL_STEP,S_BSKTC,S_ODEJY,S_RCKBY,S_DOEDR,S_SCALE,S_ONEUP,S_COIN, S_SONIC,S_ZELDA,_______,_______,_______,_______,_______,\
|
||||
_______, _______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, \
|
||||
_______, _______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
|
||||
_______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, MO(_YF), \
|
||||
_______, _______, _______, _______, _______, _______, MO(_FL), _______),
|
||||
[_YF] = KEYMAP(
|
||||
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\
|
||||
_______,_______,KC_UP ,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
|
||||
_______,KC_LEFT,KC_DOWN,KC_RIGHT,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
|
||||
_______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, MO(_YF), \
|
||||
_______, _______, _______, _______, _______, _______, MO(_FL), _______)
|
||||
};
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
switch (keycode) {
|
||||
case S_BSKTC:
|
||||
if (record->event.pressed) {
|
||||
stop_all_notes();
|
||||
PLAY_SONG(song_basketcase);
|
||||
}
|
||||
return false;
|
||||
case S_ODEJY:
|
||||
if (record->event.pressed) {
|
||||
stop_all_notes();
|
||||
PLAY_SONG(song_ode_to_joy);
|
||||
}
|
||||
return false;
|
||||
case S_RCKBY:
|
||||
if (record->event.pressed) {
|
||||
stop_all_notes();
|
||||
PLAY_SONG(song_rock_a_bye_baby);
|
||||
}
|
||||
return false;
|
||||
case S_DOEDR:
|
||||
if (record->event.pressed) {
|
||||
stop_all_notes();
|
||||
PLAY_SONG(song_doe_a_deer);
|
||||
}
|
||||
return false;
|
||||
case S_SCALE:
|
||||
if (record->event.pressed) {
|
||||
stop_all_notes();
|
||||
PLAY_SONG(song_scale);
|
||||
}
|
||||
return false;
|
||||
case S_ONEUP:
|
||||
if (record->event.pressed) {
|
||||
stop_all_notes();
|
||||
PLAY_SONG(song_one_up);
|
||||
}
|
||||
return false;
|
||||
case S_COIN:
|
||||
if (record->event.pressed) {
|
||||
stop_all_notes();
|
||||
PLAY_SONG(song_coin);
|
||||
}
|
||||
return false;
|
||||
case S_SONIC:
|
||||
if (record->event.pressed) {
|
||||
stop_all_notes();
|
||||
PLAY_SONG(song_sonic_ring);
|
||||
}
|
||||
return false;
|
||||
case S_ZELDA:
|
||||
if (record->event.pressed) {
|
||||
stop_all_notes();
|
||||
PLAY_SONG(song_zelda_puzzle);
|
||||
}
|
||||
return false;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
@ -0,0 +1,14 @@
|
||||
# /u/yanfali keymap for clueboard 60%
|
||||
|
||||
Almost the same as default but differs in the following ways
|
||||
|
||||
1. `Caps Lock` -> `MT(KC_LCTL, KC_ESC)`.
|
||||
I'm a heavy vim user and I prefer escape to be closer than default. I also move `Control` to this key if you hold it.
|
||||
1. Switch Alt and GUI.
|
||||
I spend most of my time on OSX, so I reverse Alt and GUI to be
|
||||
more comfortable on OSX.
|
||||
1. Added a custom layer.
|
||||
I use this to map the cursor keys to WASD, the familiar directional
|
||||
gaming keys. As I use a split right shift, this naturally leads
|
||||
to the left hand being used for navigation. This is also the
|
||||
best place to add custom mappings, macros and combo keys.
|
||||
@ -0,0 +1,36 @@
|
||||
#include "66.h"
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
#define _BL 0
|
||||
#define _FL 1
|
||||
#define _CL 2
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap _BL: Base Layer (Default Layer)
|
||||
*/
|
||||
[_BL] = LAYOUT_66_ansi(
|
||||
KC_GESC,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC, KC_PGUP,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS, KC_PGDN,
|
||||
KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
|
||||
KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,MO(_FL),KC_RCTL,KC_LEFT,KC_DOWN,KC_RGHT),
|
||||
|
||||
/* Keymap _FL: Function Layer
|
||||
*/
|
||||
[_FL] = LAYOUT_66_ansi(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_VOLU,
|
||||
_______,_______,_______,_______,_______,_______,_______,_______,_______,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_MUTE, KC_VOLD,
|
||||
_______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,
|
||||
_______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, KC_PGUP,
|
||||
_______,_______,_______, _______, _______,MO(_FL),_______,KC_HOME,KC_PGDN,KC_END),
|
||||
|
||||
/* Keymap _CL: Control layer
|
||||
*/
|
||||
[_CL] = LAYOUT_66_ansi(
|
||||
BL_STEP,RGB_M_P,RGB_M_B,RGB_M_R,RGB_M_SW,RGB_M_SN,RGB_M_K,RGB_M_X,RGB_M_G,_______,_______,_______,_______, RGB_TOG, RGB_VAI,
|
||||
_______,_______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, RGB_VAD,
|
||||
_______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,
|
||||
_______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, RGB_SAI,
|
||||
_______,_______,_______, RGB_MOD, _______,MO(_FL),_______,RGB_HUD,RGB_SAD,RGB_HUI),
|
||||
};
|
||||
@ -0,0 +1,11 @@
|
||||
|
||||
|
||||
# Basic Clueboard 66% Hotswap Layout
|
||||
|
||||
This is the default layout that comes flashed on every Clueboard. For the most
|
||||
part it's a straightforward and easy to follow layout. The only unusual key is
|
||||
the key in the upper left, which sends Escape normally, but Grave when any of
|
||||
the Ctrl, Alt, or GUI modifiers are held down.
|
||||
|
||||
This uses `LAYOUT_66_ansi`, which is compatable with the `66_ansi` community
|
||||
layout.
|
||||
@ -0,0 +1,36 @@
|
||||
#include "66.h"
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
#define _BL 0
|
||||
#define _FL 1
|
||||
#define _CL 2
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap _BL: Base Layer (Default Layer)
|
||||
*/
|
||||
[_BL] = LAYOUT_66_iso(
|
||||
KC_GESC,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC, KC_PGUP,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC, KC_PGDN,
|
||||
KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_NUHS,KC_ENT,
|
||||
KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
|
||||
KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,MO(_FL),KC_RCTL,KC_LEFT,KC_DOWN,KC_RGHT),
|
||||
|
||||
/* Keymap _FL: Function Layer
|
||||
*/
|
||||
[_FL] = LAYOUT_66_iso(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_VOLU,
|
||||
_______,_______,_______,_______,_______,_______,_______,_______,_______,KC_MPRV,KC_MPLY,KC_MNXT,_______, KC_VOLD,
|
||||
_______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
|
||||
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, KC_PGUP,
|
||||
_______,_______,_______, _______, _______,MO(_FL),_______,KC_HOME,KC_PGDN,KC_END),
|
||||
|
||||
/* Keymap _CL: Control layer
|
||||
*/
|
||||
[_CL] = LAYOUT_66_iso(
|
||||
BL_STEP,RGB_M_P,RGB_M_B,RGB_M_R,RGB_M_SW,RGB_M_SN,RGB_M_K,RGB_M_X,RGB_M_G,_______,_______,_______,_______, RGB_TOG, RGB_VAI,
|
||||
_______,_______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______, RGB_VAD,
|
||||
_______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
|
||||
MO(_FL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, RGB_SAI,
|
||||
_______,_______,_______, RGB_MOD, _______,MO(_FL),_______,RGB_HUD,RGB_SAD,RGB_HUI),
|
||||
};
|
||||
@ -0,0 +1,8 @@
|
||||
|
||||
|
||||
# Default Clueboard Layout
|
||||
|
||||
This is the default layout that comes flashed on every Clueboard. For the most
|
||||
part it's a straightforward and easy to follow layout. The only unusual key is
|
||||
the key in the upper left, which sends Escape normally, but Grave when any of
|
||||
the Ctrl, Alt, or GUI modifiers are held down.
|
||||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue