Add Sun converter initial files.
tmk
12 years ago
parent
3c822b511e
commit
97ee1be59d
@ -0,0 +1,90 @@
|
||||
#
|
||||
# Makefile for PJRC Teensy
|
||||
#
|
||||
|
||||
|
||||
# Target file name (without extension).
|
||||
TARGET = sun_usb
|
||||
|
||||
# Directory common source filess exist
|
||||
TOP_DIR = ../..
|
||||
|
||||
# Directory keyboard dependent files exist
|
||||
TARGET_DIR = .
|
||||
|
||||
# keyboard dependent files
|
||||
SRC = keymap.c \
|
||||
matrix.c \
|
||||
led.c \
|
||||
protocol/serial.c
|
||||
|
||||
CONFIG_H = config.h
|
||||
|
||||
|
||||
# MCU name, you MUST set this to match the board you are using
|
||||
# type "make clean" after changing this, so all files will be rebuilt
|
||||
#MCU = at90usb162 # Teensy 1.0
|
||||
MCU = atmega32u4 # Teensy 2.0
|
||||
#MCU = at90usb646 # Teensy++ 1.0
|
||||
#MCU = at90usb1286 # Teensy++ 2.0
|
||||
|
||||
|
||||
# Processor frequency.
|
||||
# Normally the first thing your program should do is set the clock prescaler,
|
||||
# so your program will run at the correct speed. You should also set this
|
||||
# variable to same clock speed. The _delay_ms() macro uses this, and many
|
||||
# examples use this variable to calculate timings. Do not add a "UL" here.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
# Build Options
|
||||
# *Comment out* to disable the options.
|
||||
#
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
|
||||
|
||||
|
||||
#---------------- Programming Options --------------------------
|
||||
AVRDUDE = avrdude
|
||||
# Type: avrdude -c ? to get a full listing.
|
||||
AVRDUDE_PROGRAMMER = avr109
|
||||
AVRDUDE_PORT = /dev/ttyACM0
|
||||
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
|
||||
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
|
||||
|
||||
# Uncomment the following if you want avrdude's erase cycle counter.
|
||||
# Note that this counter needs to be initialized first using -Yn,
|
||||
# see avrdude manual.
|
||||
#AVRDUDE_ERASE_COUNTER = -y
|
||||
|
||||
# Uncomment the following if you do /not/ wish a verification to be
|
||||
# performed after programming the device.
|
||||
#AVRDUDE_NO_VERIFY = -V
|
||||
|
||||
# Increase verbosity level. Please use this when submitting bug
|
||||
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
|
||||
# to submit bug reports.
|
||||
#AVRDUDE_VERBOSE = -v -v
|
||||
|
||||
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
|
||||
#AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
|
||||
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
|
||||
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
|
||||
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
|
||||
|
||||
#PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
|
||||
#PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
|
||||
PROGRAM_CMD = dfu-programmer atmega32u4 flash $(TARGET).hex
|
||||
|
||||
|
||||
# Search Path
|
||||
VPATH += $(TARGET_DIR)
|
||||
VPATH += $(TOP_DIR)
|
||||
|
||||
|
||||
include $(TOP_DIR)/protocol/pjrc.mk
|
||||
include $(TOP_DIR)/protocol.mk
|
||||
include $(TOP_DIR)/common.mk
|
||||
include $(TOP_DIR)/rules.mk
|
||||
@ -0,0 +1,141 @@
|
||||
Sun to USB keyboard protocol converter
|
||||
======================================
|
||||
|
||||
TODO
|
||||
----
|
||||
AVR UART engine expect positive logic while Sun keyboard signal is inverted serial.
|
||||
To use AVR UART engine you need inverter in front of RX and TX pin.
|
||||
Otherwise you can software serial routine to communicate the keyboard.
|
||||
|
||||
|
||||
Hardware
|
||||
--------
|
||||
Target MCU is ATMega32u4 but other USB capable AVR will also work.
|
||||
You can use PJRC Teensy as dev board.
|
||||
http://www.pjrc.com/teensy/
|
||||
|
||||
Connector
|
||||
8Pin mini DIN
|
||||
___ ___
|
||||
/ |_| \
|
||||
/ 8 7 6 \
|
||||
| 5 4 3 |
|
||||
\_ 2 1 _/
|
||||
\_____/
|
||||
(receptacle)
|
||||
|
||||
Wiring:
|
||||
Pin mini DIN Teensy
|
||||
----------------------------------
|
||||
1 GND GND
|
||||
2 GND GND
|
||||
3 5V
|
||||
4 RX/TX(Mouse)
|
||||
5 RX PD2
|
||||
6 TX PD3
|
||||
7 GND GND
|
||||
8 5V VCC
|
||||
|
||||
|
||||
|
||||
Firmware
|
||||
--------
|
||||
Build:
|
||||
$ cd sun_usb
|
||||
$ make
|
||||
|
||||
And load the binary to MCU with your favorite programmer.
|
||||
If you use Teensy you can load with PJRC Teensy Loader tool.
|
||||
http://www.pjrc.com/teensy/loader.html
|
||||
|
||||
|
||||
* * * * * * * * * * * * * * * * * *
|
||||
|
||||
|
||||
X68000 Keyboard Protocol
|
||||
========================
|
||||
http://kyoutan.jpn.org/uts/pc/pic/x68key/
|
||||
|
||||
|
||||
Connector
|
||||
---------
|
||||
Mini DIN 7pin(female connector on computer side)
|
||||
7 6 5
|
||||
o o o
|
||||
4 o = o 3
|
||||
o o
|
||||
2 1
|
||||
|
||||
Mini-DIN
|
||||
-------------
|
||||
pin1 +5V
|
||||
pin2 MOUSE
|
||||
pin3 RXD
|
||||
pin4 TXD
|
||||
pin5 READY
|
||||
pin6 REMOTE
|
||||
pin7 GND
|
||||
|
||||
|
||||
Signaling
|
||||
---------
|
||||
- TXD,RXD
|
||||
Asynchronous, 2400baud, 1-startbit(L), 8-databit, 1-stopbit(H)
|
||||
|
||||
- READY
|
||||
ready/not ready(1/0)
|
||||
|
||||
|
||||
Data from keyboard
|
||||
------------------
|
||||
bit 7 make/break flag(0/1)
|
||||
bit 6-0 following scan code
|
||||
|
||||
|
||||
Data from computer
|
||||
------------------
|
||||
- LED contorol ON/OFF(0/1)
|
||||
bit 7 1(fixed)
|
||||
bit 6 全角
|
||||
bit 5 ひらがな
|
||||
bit 4 INS
|
||||
bit 3 CAPS
|
||||
bit 2 コード入力
|
||||
bit 1 ローマ字
|
||||
bit 0 かな
|
||||
|
||||
- Repeat delay
|
||||
bit 7 0(fixed)
|
||||
bit 6 1(fixed)
|
||||
bit 5 1(fixed)
|
||||
bit 4 0(fixed)
|
||||
bit 3-0 delay
|
||||
REPEAT_DELAY = 200+delay*100 ms
|
||||
default: 500ms
|
||||
|
||||
- Repeat time
|
||||
bit 7 0(fixed)
|
||||
bit 6 1(fixed)
|
||||
bit 5 1(fixed)
|
||||
bit 4 1(fixed)
|
||||
bit 3-0 time
|
||||
REPEAT_TIME = 30+time^2*5 ms
|
||||
default: 110ms
|
||||
|
||||
|
||||
Scan Codes
|
||||
----------
|
||||
,---. ,---. ,-------------------, ,-------------------. ,-----------. ,---------------.
|
||||
| 61| | 62| | 63| 64| 65| 66| 67| | 68| 69| 6A| 6B| 6C| | 5A| 5B| 5C| | 5D| 52| 53| 54|
|
||||
`---' `---' `-------------------' `-------------------' `-----------' `---------------'
|
||||
,-----------------------------------------------------------. ,-----------. ,---------------.
|
||||
| 01| 02| 03| 04| 05| 06| 07| 08| 09| 0A| 0B| 0C| 0D| 0E| 0F| | 36| 5E| 37| | 3F| 40| 41| 42|
|
||||
|-----------------------------------------------------------| |------------ |---------------|
|
||||
| 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1A| 1B| 1C| | | 38| 39| 3A| | 43| 44| 45| 46|
|
||||
|------------------------------------------------------. 1D | `---=====---' |---------------|
|
||||
| 71 | 1E| 1F| 20| 21| 2l| 23| 24| 25| 26| 27| 28| 29| | ___| 3C|___ | 47| 48| 49| 4A|
|
||||
|-----------------------------------------------------------| | 3B|---| 3D| |-----------|---|
|
||||
| 70 | 2A| 2B| 2C| 2D| 2E| 2F| 30| 31| 32| 33| 34| 70 | `---| 3E|---' | 4B| 4C| 4D| |
|
||||
`-----------------------------------------------------------| .---=====---. |-----------| 4E|
|
||||
| 5F| 55 | 56 | 35 | 57 | 58 | 59 | 60| | 72 | 73 | | 4F| 50| 51| |
|
||||
`---------------------------------------------' `-----------' `---------------'
|
||||
@ -0,0 +1,61 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
/* controller configuration */
|
||||
#include "controller_teensy.h"
|
||||
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x3333
|
||||
#define MANUFACTURER t.m.k.
|
||||
#define PRODUCT Sun keyboard converter
|
||||
#define DESCRIPTION converts Sun keyboard protocol into USB
|
||||
|
||||
|
||||
/* matrix size */
|
||||
#define MATRIX_ROWS 16
|
||||
#define MATRIX_COLS 8
|
||||
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
|
||||
/* Serial(USART) configuration
|
||||
* asynchronous, negative logic, 1200baud, no flow control
|
||||
* 1-start bit, 8-data bit, non parity, 1-stop bit
|
||||
*/
|
||||
#ifdef __AVR_ATmega32U4__
|
||||
# define SERIAL_RX_VECT USART1_RX_vect
|
||||
# define SERIAL_RX_DATA UDR1
|
||||
# define SERIAL_RX_BAUD 1200
|
||||
# define SERIAL_RX_UBBR ((F_CPU/(16UL*SERIAL_RX_BAUD))-1)
|
||||
# define SERIAL_RX_INIT() do { \
|
||||
UBRR1L = (uint8_t) SERIAL_RX_UBBR; \
|
||||
UBRR1H = (uint8_t) (SERIAL_RX_UBBR>>8); \
|
||||
UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); \
|
||||
} while(0)
|
||||
#else
|
||||
# error "Serial(USART) configuration is needed."
|
||||
#endif
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,140 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <avr/pgmspace.h>
|
||||
#include "keycode.h"
|
||||
#include "util.h"
|
||||
#include "keymap.h"
|
||||
|
||||
|
||||
|
||||
|
||||
// Following macros help you to define a keymap with the form of actual keyboard layout.
|
||||
|
||||
/* X68000 Keyboard Scan codes
|
||||
,-------. ,-------------------. ,---------------. ,---------------. ,-----------. ,---------------.
|
||||
| | | 61| | | | | | 63| 65| 66| 67| | 69| 6A| 6B| 6C| | 5A| 5B| 5C| | 5D| 52| 53| 54|
|
||||
`-------' `-------------------' `---------------' `---------------' `-----------' `---------------'
|
||||
,-------. ,-----------------------------------------------------------. ,-----------. ,---------------.
|
||||
| | | | 01| 02| 03| 04| 05| 06| 07| 08| 09| 0A| 0B| 0C| 0D| 0E| 0F| | 36| 5E| 37| | 3F| 40| 41| 42|
|
||||
|-------| |-----------------------------------------------------------| |------------ |---------------|
|
||||
| | | | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1A| 1B| 1C| | | 38| 39| 3A| | 43| 44| 45| 46|
|
||||
|-------| |-----------------------------------------------------------| `-----------' |-----------| |
|
||||
| | | | 71 | 1E| 1F| 20| 21| 2l| 23| 24| 25| 26| 27| 28| 29 | | 47| 48| 49| 4A|
|
||||
|-------| |-----------------------------------------------------------| ,---. |-----------|---|
|
||||
| | | | 70 | 2A| 2B| 2C| 2D| 2E| 2F| 30| 31| 32| 33| 70 | | 3E| | 4B| 4C| 4D| |
|
||||
|-------| |-----------------------------------------------------------| .-----------. |-----------| 4E|
|
||||
| | | | | | | 35 | | | | | | |73 | | 4F| 50| 51| |
|
||||
`-------' `-----------------------------------------------------------' `-----------' `---------------'
|
||||
*/
|
||||
#define KEYMAP( \
|
||||
K61,K62, K63,K64,K65,K66,K67, K68,K69,K6A,K6B,K6C, K5A,K5B,K5C, K5D,K52,K53,K54, \
|
||||
K01,K02,K03,K04,K05,K06,K07,K08,K09,K0A,K0B,K0C,K0D,K0E,K0F, K36,K5E,K37, K3F,K40,K41,K42, \
|
||||
K10,K11,K12,K13,K14,K15,K16,K17,K18,K19,K1A,K1B,K1C, K1D, K38,K39,K3A, K43,K44,K45,K46, \
|
||||
K71,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29, K3C, K47,K48,K49,K4A, \
|
||||
K70,K2A,K2B,K2C,K2D,K2E,K2F,K30,K31,K32,K33,K34, K3B,K3E,K3D, K4B,K4C,K4D,K4E, \
|
||||
K5F,K55,K56, K35, K57,K58,K59,K60, K72, K73, K4F,K50,K51 \
|
||||
) { \
|
||||
{ KC_NO, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
|
||||
{ KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \
|
||||
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
|
||||
{ KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \
|
||||
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
|
||||
{ KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \
|
||||
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \
|
||||
{ KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F }, \
|
||||
{ KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \
|
||||
{ KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F }, \
|
||||
{ KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
|
||||
{ KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D, KC_##K5E, KC_##K5F }, \
|
||||
{ KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \
|
||||
{ KC_##K68, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_NO, KC_NO, KC_NO }, \
|
||||
{ KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_NO, KC_NO, KC_NO, KC_NO, }, \
|
||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO } \
|
||||
}
|
||||
|
||||
|
||||
// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
|
||||
static const uint8_t PROGMEM fn_layer[] = {
|
||||
0, // Fn0
|
||||
0, // Fn1
|
||||
0, // Fn2
|
||||
0, // Fn3
|
||||
0, // Fn4
|
||||
0, // Fn5
|
||||
0, // Fn6
|
||||
0 // Fn7
|
||||
};
|
||||
|
||||
// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
|
||||
// See layer.c for details.
|
||||
static const uint8_t PROGMEM fn_keycode[] = {
|
||||
KC_NO, // Fn0
|
||||
KC_NO, // Fn1
|
||||
KC_NO, // Fn2
|
||||
KC_NO, // Fn3
|
||||
KC_NO, // Fn4
|
||||
KC_NO, // Fn5
|
||||
KC_NO, // Fn6
|
||||
KC_NO // Fn7
|
||||
};
|
||||
|
||||
|
||||
static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* X68000 Keyboard Scan codes
|
||||
,---. ,---. ,-------------------, ,-------------------. ,-----------. ,---------------.
|
||||
| 61| | 62| | 63| 64| 65| 66| 67| | 68| 69| 6A| 6B| 6C| | 5A| 5B| 5C| | 5D| 52| 53| 54|
|
||||
`---' `---' `-------------------' `-------------------' `-----------' `---------------'
|
||||
,-----------------------------------------------------------. ,-----------. ,---------------.
|
||||
| 01| 02| 03| 04| 05| 06| 07| 08| 09| 0A| 0B| 0C| 0D| 0E| 0F| | 36| 5E| 37| | 3F| 40| 41| 42|
|
||||
|-----------------------------------------------------------| |------------ |---------------|
|
||||
| 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1A| 1B| 1C| | | 38| 39| 3A| | 43| 44| 45| 46|
|
||||
|------------------------------------------------------. 1D | `---=====---' |---------------|
|
||||
| 71 | 1E| 1F| 20| 21| 2l| 23| 24| 25| 26| 27| 28| 29| | ___| 3C|___ | 47| 48| 49| 4A|
|
||||
|-----------------------------------------------------------| | 3B|---| 3D| |-----------|---|
|
||||
| 70 | 2A| 2B| 2C| 2D| 2E| 2F| 30| 31| 32| 33| 34| 70 | `---| 3E|---' | 4B| 4C| 4D| |
|
||||
`-----------------------------------------------------------| .---=====---. |-----------| 4E|
|
||||
| 5F| 55 | 56 | 35 | 57 | 58 | 59 | 60| | 72 | 73 | | 4F| 50| 51| |
|
||||
`---------------------------------------------' `-----------' `---------------'
|
||||
*/
|
||||
KEYMAP(
|
||||
NO, NO, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, PSCR,SLCK,PAUS, CAPS,NO, NO, NO,
|
||||
ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
|
||||
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, ENT, DEL, END, PGDN, P7, P8, P9, PPLS,
|
||||
LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,ENT, UP, P4, P5, P6, PEQL,
|
||||
LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH,GRV, LEFT,DOWN,RGHT, P1, P2, P3, PENT,
|
||||
LGUI,LALT,NO, SPC, RALT,RGUI,RCTL,APP, NO, NO, P0, PCMM,PDOT
|
||||
),
|
||||
};
|
||||
|
||||
|
||||
uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
|
||||
{
|
||||
return pgm_read_byte(&keymaps[(layer)][(row)][(col)]);
|
||||
}
|
||||
|
||||
uint8_t keymap_fn_layer(uint8_t fn_bits)
|
||||
{
|
||||
return pgm_read_byte(&fn_layer[biton(fn_bits)]);
|
||||
}
|
||||
|
||||
uint8_t keymap_fn_keycode(uint8_t fn_bits)
|
||||
{
|
||||
return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);
|
||||
}
|
||||
@ -0,0 +1,26 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "stdint.h"
|
||||
#include "serial.h"
|
||||
#include "led.h"
|
||||
|
||||
|
||||
void led_set(uint8_t usb_led)
|
||||
{
|
||||
// not supported now
|
||||
}
|
||||
@ -0,0 +1,180 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <avr/io.h>
|
||||
#include <util/delay.h>
|
||||
#include "print.h"
|
||||
#include "util.h"
|
||||
#include "serial.h"
|
||||
#include "matrix.h"
|
||||
#include "debug.h"
|
||||
|
||||
|
||||
/*
|
||||
* Matrix Array usage:
|
||||
*
|
||||
* ROW: 16(4bits)
|
||||
* COL: 8(3bits)
|
||||
*
|
||||
* 8bit wide
|
||||
* +---------+
|
||||
* 0|00 ... 07|
|
||||
* 1|08 ... 0F|
|
||||
* :| ... |
|
||||
* :| ... |
|
||||
* E|70 ... 77|
|
||||
* F|78 ... 7F|
|
||||
* +---------+
|
||||
*
|
||||
* Command From System To Keyboard
|
||||
* 0x01 Reset
|
||||
* 0x02 Bell On
|
||||
* 0x03 Bell Off
|
||||
* 0x0A Click On
|
||||
* 0x0B Click Off
|
||||
* 0x0E LED
|
||||
* 0x0F Layout
|
||||
*
|
||||
* Command From Keyboard To System
|
||||
* 0x7F Idle
|
||||
* 0xFE Layout Response
|
||||
* 0xFF Reset Response(followed by 0x04)
|
||||
*
|
||||
* bit: 3 2 1 0
|
||||
* LED: CapsLk ScrLk Compose NumLk
|
||||
*
|
||||
* Connector
|
||||
* 8Pin mini DIN
|
||||
* 8 7 6
|
||||
* 5 4 3
|
||||
* 2 1
|
||||
* receptacle
|
||||
*
|
||||
* 1: GND
|
||||
* 2: GND
|
||||
* 3: 5V
|
||||
* 4: RX/TX(Mouse)
|
||||
* 5: RX
|
||||
* 6: TX
|
||||
* 7: GND
|
||||
* 8: 5V
|
||||
*/
|
||||
static uint8_t matrix[MATRIX_ROWS];
|
||||
#define ROW(code) ((code>>3)&0xF)
|
||||
#define COL(code) (code&0x07)
|
||||
|
||||
static bool is_modified = false;
|
||||
|
||||
|
||||
inline
|
||||
uint8_t matrix_rows(void)
|
||||
{
|
||||
return MATRIX_ROWS;
|
||||
}
|
||||
|
||||
inline
|
||||
uint8_t matrix_cols(void)
|
||||
{
|
||||
return MATRIX_COLS;
|
||||
}
|
||||
|
||||
void matrix_init(void)
|
||||
{
|
||||
print_enable = true;
|
||||
debug_enable = true;
|
||||
|
||||
serial_init();
|
||||
|
||||
// initialize matrix state: all keys off
|
||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
|
||||
|
||||
return;
|
||||
}
|
||||
|
||||
uint8_t matrix_scan(void)
|
||||
{
|
||||
is_modified = false;
|
||||
|
||||
uint8_t code;
|
||||
code = serial_recv();
|
||||
if (code == 0) {
|
||||
return 0;
|
||||
}
|
||||
|
||||
phex(code); print("(");
|
||||
code = ~code;
|
||||
phex(code); print(")");
|
||||
return 0;
|
||||
if (code&0x80) {
|
||||
// break code
|
||||
if (matrix_is_on(ROW(code), COL(code))) {
|
||||
matrix[ROW(code)] &= ~(1<<COL(code));
|
||||
is_modified = true;
|
||||
}
|
||||
} else {
|
||||
// make code
|
||||
if (!matrix_is_on(ROW(code), COL(code))) {
|
||||
matrix[ROW(code)] |= (1<<COL(code));
|
||||
is_modified = true;
|
||||
}
|
||||
}
|
||||
return code;
|
||||
}
|
||||
|
||||
bool matrix_is_modified(void)
|
||||
{
|
||||
return is_modified;
|
||||
}
|
||||
|
||||
inline
|
||||
bool matrix_has_ghost(void)
|
||||
{
|
||||
return false;
|
||||
}
|
||||
|
||||
inline
|
||||
bool matrix_is_on(uint8_t row, uint8_t col)
|
||||
{
|
||||
return (matrix[row] & (1<<col));
|
||||
}
|
||||
|
||||
inline
|
||||
uint8_t matrix_get_row(uint8_t row)
|
||||
{
|
||||
return matrix[row];
|
||||
}
|
||||
|
||||
void matrix_print(void)
|
||||
{
|
||||
print("\nr/c 01234567\n");
|
||||
for (uint8_t row = 0; row < matrix_rows(); row++) {
|
||||
phex(row); print(": ");
|
||||
pbin_reverse(matrix_get_row(row));
|
||||
print("\n");
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t matrix_key_count(void)
|
||||
{
|
||||
uint8_t count = 0;
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
count += bitpop(matrix[i]);
|
||||
}
|
||||
return count;
|
||||
}
|
||||
@ -0,0 +1,75 @@
|
||||
/*
|
||||
Copyright 2012 Jun WAKO <wakojun@gmail.com>
|
||||
|
||||
This software is licensed with a Modified BSD License.
|
||||
All of this is supposed to be Free Software, Open Source, DFSG-free,
|
||||
GPL-compatible, and OK to use in both free and proprietary applications.
|
||||
Additions and corrections to this file are welcome.
|
||||
|
||||
|
||||
Redistribution and use in source and binary forms, with or without
|
||||
modification, are permitted provided that the following conditions are met:
|
||||
|
||||
* Redistributions of source code must retain the above copyright
|
||||
notice, this list of conditions and the following disclaimer.
|
||||
|
||||
* Redistributions in binary form must reproduce the above copyright
|
||||
notice, this list of conditions and the following disclaimer in
|
||||
the documentation and/or other materials provided with the
|
||||
distribution.
|
||||
|
||||
* Neither the name of the copyright holders nor the names of
|
||||
contributors may be used to endorse or promote products derived
|
||||
from this software without specific prior written permission.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
||||
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
||||
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
||||
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
#include <stdbool.h>
|
||||
#include <avr/io.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include "serial.h"
|
||||
|
||||
|
||||
void serial_init(void)
|
||||
{
|
||||
SERIAL_RX_INIT();
|
||||
}
|
||||
|
||||
// RX ring buffer
|
||||
#define RBUF_SIZE 8
|
||||
static uint8_t rbuf[RBUF_SIZE];
|
||||
static uint8_t rbuf_head = 0;
|
||||
static uint8_t rbuf_tail = 0;
|
||||
|
||||
uint8_t serial_recv(void)
|
||||
{
|
||||
uint8_t data = 0;
|
||||
if (rbuf_head == rbuf_tail) {
|
||||
return 0;
|
||||
}
|
||||
|
||||
data = rbuf[rbuf_tail];
|
||||
rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE;
|
||||
return data;
|
||||
}
|
||||
|
||||
// USART RX complete interrupt
|
||||
ISR(SERIAL_RX_VECT)
|
||||
{
|
||||
uint8_t next = (rbuf_head + 1) % RBUF_SIZE;
|
||||
if (next != rbuf_tail) {
|
||||
rbuf[rbuf_head] = SERIAL_RX_DATA;
|
||||
rbuf_head = next;
|
||||
}
|
||||
}
|
||||
@ -0,0 +1,45 @@
|
||||
/*
|
||||
Copyright 2012 Jun WAKO <wakojun@gmail.com>
|
||||
|
||||
This software is licensed with a Modified BSD License.
|
||||
All of this is supposed to be Free Software, Open Source, DFSG-free,
|
||||
GPL-compatible, and OK to use in both free and proprietary applications.
|
||||
Additions and corrections to this file are welcome.
|
||||
|
||||
|
||||
Redistribution and use in source and binary forms, with or without
|
||||
modification, are permitted provided that the following conditions are met:
|
||||
|
||||
* Redistributions of source code must retain the above copyright
|
||||
notice, this list of conditions and the following disclaimer.
|
||||
|
||||
* Redistributions in binary form must reproduce the above copyright
|
||||
notice, this list of conditions and the following disclaimer in
|
||||
the documentation and/or other materials provided with the
|
||||
distribution.
|
||||
|
||||
* Neither the name of the copyright holders nor the names of
|
||||
contributors may be used to endorse or promote products derived
|
||||
from this software without specific prior written permission.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
||||
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
||||
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
||||
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
#ifndef SERIAL_H
|
||||
#define SERIAL_H
|
||||
|
||||
/* host role */
|
||||
void serial_init(void);
|
||||
uint8_t serial_recv(void);
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue