Merge branch 'master' of https://github.com/jackhumbert/qmk_firmware
Christopher Browne
9 years ago
commit
95a88c09e1
@ -0,0 +1,25 @@
|
|||||||
|
#include "Bantam44.h"
|
||||||
|
|
||||||
|
__attribute__ ((weak))
|
||||||
|
void matrix_init_user(void) {
|
||||||
|
// leave these blank
|
||||||
|
}
|
||||||
|
|
||||||
|
__attribute__ ((weak))
|
||||||
|
void matrix_scan_user(void) {
|
||||||
|
// leave these blank
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_init_kb(void) {
|
||||||
|
// put your keyboard start-up code here
|
||||||
|
// runs once when the firmware starts up
|
||||||
|
|
||||||
|
matrix_init_user();
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_scan_kb(void) {
|
||||||
|
// put your looping keyboard code here
|
||||||
|
// runs every cycle (a lot)
|
||||||
|
|
||||||
|
matrix_scan_user();
|
||||||
|
}
|
||||||
@ -0,0 +1,29 @@
|
|||||||
|
#ifndef BANTAM44_H
|
||||||
|
#define BANTAM44_H
|
||||||
|
|
||||||
|
#include "matrix.h"
|
||||||
|
#include "keymap_common.h"
|
||||||
|
#include "backlight.h"
|
||||||
|
#include <stddef.h>
|
||||||
|
|
||||||
|
// This a shortcut to help you visually see your layout.
|
||||||
|
// The following is an example using the Planck MIT layout
|
||||||
|
// The first section contains all of the arguements
|
||||||
|
// The second converts the arguments into a two-dimensional array
|
||||||
|
#define KEYMAP( \
|
||||||
|
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
|
||||||
|
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
|
||||||
|
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
|
||||||
|
K30, K31, K32, K33, K34, K35, K36, K37, K38 \
|
||||||
|
) \
|
||||||
|
{ \
|
||||||
|
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \
|
||||||
|
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, KC_NO, K2A }, \
|
||||||
|
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \
|
||||||
|
{ K30, K31, K32, KC_NO, K33, KC_NO, K34, KC_NO, K35, K36, K37, K38 }, \
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_init_user(void);
|
||||||
|
void matrix_scan_user(void);
|
||||||
|
|
||||||
|
#endif
|
||||||
@ -0,0 +1,139 @@
|
|||||||
|
#----------------------------------------------------------------------------
|
||||||
|
# On command line:
|
||||||
|
#
|
||||||
|
# make all = Make software.
|
||||||
|
#
|
||||||
|
# make clean = Clean out built project files.
|
||||||
|
#
|
||||||
|
# make coff = Convert ELF to AVR COFF.
|
||||||
|
#
|
||||||
|
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||||
|
#
|
||||||
|
# make program = Download the hex file to the device.
|
||||||
|
# Please customize your programmer settings(PROGRAM_CMD)
|
||||||
|
#
|
||||||
|
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||||
|
# (must have teensy_loader_cli installed).
|
||||||
|
#
|
||||||
|
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||||
|
# have dfu-programmer installed).
|
||||||
|
#
|
||||||
|
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||||
|
# have Atmel FLIP installed).
|
||||||
|
#
|
||||||
|
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||||
|
# (must have dfu-programmer installed).
|
||||||
|
#
|
||||||
|
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||||
|
# (must have Atmel FLIP installed).
|
||||||
|
#
|
||||||
|
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||||
|
# with avr-gdb or avr-insight as the front end for debugging.
|
||||||
|
#
|
||||||
|
# make filename.s = Just compile filename.c into the assembler code only.
|
||||||
|
#
|
||||||
|
# make filename.i = Create a preprocessed source file for use in submitting
|
||||||
|
# bug reports to the GCC project.
|
||||||
|
#
|
||||||
|
# To rebuild project do "make clean" then "make all".
|
||||||
|
#----------------------------------------------------------------------------
|
||||||
|
|
||||||
|
# Target file name (without extension).
|
||||||
|
TARGET = Bantam44
|
||||||
|
|
||||||
|
|
||||||
|
# Directory common source filess exist
|
||||||
|
TOP_DIR = ../..
|
||||||
|
TMK_DIR = ../../tmk_core
|
||||||
|
|
||||||
|
# Directory keyboard dependent files exist
|
||||||
|
TARGET_DIR = .
|
||||||
|
|
||||||
|
# # project specific files
|
||||||
|
SRC = Bantam44.c
|
||||||
|
|
||||||
|
ifdef KEYMAP
|
||||||
|
SRC := keymaps/$(KEYMAP).c $(SRC)
|
||||||
|
else
|
||||||
|
SRC := keymaps/default.c $(SRC)
|
||||||
|
endif
|
||||||
|
|
||||||
|
CONFIG_H = config.h
|
||||||
|
|
||||||
|
# MCU name
|
||||||
|
#MCU = at90usb1287
|
||||||
|
MCU = atmega32u4
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 16000000
|
||||||
|
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task(+60)
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
|
||||||
|
# Boot Section Size in *bytes*
|
||||||
|
# Teensy halfKay 512
|
||||||
|
# Teensy++ halfKay 1024
|
||||||
|
# Atmel DFU loader 4096
|
||||||
|
# LUFA bootloader 4096
|
||||||
|
# USBaspLoader 2048
|
||||||
|
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||||
|
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# comment out to disable the options.
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
|
# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||||
|
# NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||||
|
# MIDI_ENABLE = YES # MIDI controls
|
||||||
|
# UNICODE_ENABLE = YES # Unicode
|
||||||
|
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
|
||||||
|
|
||||||
|
# Optimize size but this may cause error "relocation truncated to fit"
|
||||||
|
#EXTRALDFLAGS = -Wl,--relax
|
||||||
|
|
||||||
|
# Search Path
|
||||||
|
VPATH += $(TARGET_DIR)
|
||||||
|
VPATH += $(TOP_DIR)
|
||||||
|
VPATH += $(TMK_DIR)
|
||||||
|
|
||||||
|
include $(TOP_DIR)/quantum/quantum.mk
|
||||||
|
|
||||||
@ -0,0 +1,24 @@
|
|||||||
|
Bantam44 keyboard firmware
|
||||||
|
======================
|
||||||
|
|
||||||
|
## Quantum MK Firmware
|
||||||
|
|
||||||
|
For the full Quantum feature list, see [the parent README.md](/README.md).
|
||||||
|
|
||||||
|
## Building
|
||||||
|
|
||||||
|
Download or clone the whole firmware and navigate to the keyboard/Bantam44 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
|
||||||
|
|
||||||
|
Depending on which keymap you would like to use, you will have to compile slightly differently.
|
||||||
|
|
||||||
|
### Default
|
||||||
|
To build with the default keymap, simply run `make`.
|
||||||
|
|
||||||
|
### Other Keymaps
|
||||||
|
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top README.md) and existent keymap files.
|
||||||
|
|
||||||
|
To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
|
||||||
|
```
|
||||||
|
$ make KEYMAP=[default|jack|<name>]
|
||||||
|
```
|
||||||
|
Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
|
||||||
@ -0,0 +1,81 @@
|
|||||||
|
/*
|
||||||
|
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 2 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef CONFIG_H
|
||||||
|
#define CONFIG_H
|
||||||
|
|
||||||
|
#include "config_common.h"
|
||||||
|
|
||||||
|
/* USB Device descriptor parameter */
|
||||||
|
#define VENDOR_ID 0xFEED
|
||||||
|
#define PRODUCT_ID 0x6060
|
||||||
|
#define DEVICE_VER 0x0001
|
||||||
|
#define MANUFACTURER Bantam Keyboards
|
||||||
|
#define PRODUCT Bantam44
|
||||||
|
#define DESCRIPTION A custom keyboard
|
||||||
|
|
||||||
|
/* key matrix size */
|
||||||
|
#define MATRIX_ROWS 4
|
||||||
|
#define MATRIX_COLS 12
|
||||||
|
|
||||||
|
// Planck PCB default pin-out
|
||||||
|
// Change this to how you wired your keyboard
|
||||||
|
// COLS: Left to right, ROWS: Top to bottom
|
||||||
|
#define COLS (int []){ B0, B1, B2, B3, B7, D0, B6, F7, F6, F5, F4, F1 }
|
||||||
|
#define ROWS (int []){ F0, D6, D4, D5 }
|
||||||
|
|
||||||
|
/* COL2ROW or ROW2COL */
|
||||||
|
#define DIODE_DIRECTION COL2ROW
|
||||||
|
|
||||||
|
/* define if matrix has ghost */
|
||||||
|
//#define MATRIX_HAS_GHOST
|
||||||
|
|
||||||
|
/* number of backlight levels */
|
||||||
|
#define BACKLIGHT_LEVELS 3
|
||||||
|
|
||||||
|
/* Set 0 if debouncing isn't needed */
|
||||||
|
#define DEBOUNCE 5
|
||||||
|
|
||||||
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||||
|
#define LOCKING_SUPPORT_ENABLE
|
||||||
|
/* Locking resynchronize hack */
|
||||||
|
#define LOCKING_RESYNC_ENABLE
|
||||||
|
|
||||||
|
/* key combination for command */
|
||||||
|
#define IS_COMMAND() ( \
|
||||||
|
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||||
|
)
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Feature disable options
|
||||||
|
* These options are also useful to firmware size reduction.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* disable debug print */
|
||||||
|
//#define NO_DEBUG
|
||||||
|
|
||||||
|
/* disable print */
|
||||||
|
//#define NO_PRINT
|
||||||
|
|
||||||
|
/* disable action features */
|
||||||
|
//#define NO_ACTION_LAYER
|
||||||
|
//#define NO_ACTION_TAPPING
|
||||||
|
//#define NO_ACTION_ONESHOT
|
||||||
|
//#define NO_ACTION_MACRO
|
||||||
|
//#define NO_ACTION_FUNCTION
|
||||||
|
|
||||||
|
#endif
|
||||||
@ -0,0 +1,30 @@
|
|||||||
|
#include "Bantam44.h"
|
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
[0] = { /* Base */
|
||||||
|
{KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC },
|
||||||
|
{KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_NO, KC_ENT },
|
||||||
|
{KC_CAPS, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT },
|
||||||
|
{KC_LCTL, KC_LGUI, KC_LALT, KC_NO, MO(1), KC_NO, KC_SPC, KC_NO, MO(2), KC_SCLN, KC_QUOT, KC_SLSH }
|
||||||
|
},
|
||||||
|
[1] = { /* LOWER */
|
||||||
|
{KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DELT },
|
||||||
|
{KC_TAB, KC_MPRV, KC_MPLY, KC_MNXT, KC_GRV, KC_BSLS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_NO, KC_ENT },
|
||||||
|
{KC_CAPS, KC_LSFT, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_NO, KC_HOME, KC_PGUP, KC_RSFT },
|
||||||
|
{KC_LCTL, KC_LGUI, KC_LALT, KC_NO, KC_TRNS, KC_NO, KC_SPC, KC_NO, KC_TRNS, KC_END, KC_PGDN, KC_EXLM }
|
||||||
|
},
|
||||||
|
[2] = { /* RAISE */
|
||||||
|
{KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DELT },
|
||||||
|
{KC_TAB, KC_MUTE, KC_VOLD, KC_VOLU, KC_TILD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_NO, KC_ENT },
|
||||||
|
{KC_CAPS, KC_LSFT, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, KC_UP, KC_RSFT },
|
||||||
|
{KC_LCTL, KC_LGUI, KC_LALT, KC_NO, KC_TRNS, KC_NO, KC_SPC, KC_NO, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT }
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
const uint16_t PROGMEM fn_actions[] = {
|
||||||
|
};
|
||||||
|
|
||||||
|
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // MACRODOWN only works in this function
|
||||||
|
{
|
||||||
|
return MACRO_NONE;
|
||||||
|
};
|
||||||
@ -0,0 +1,29 @@
|
|||||||
|
# ErgoDox EZ naps62 Configuration
|
||||||
|
|
||||||
|
## Motivation
|
||||||
|
|
||||||
|
I wanted a layout that suited my Linux & Vim usage. I also didn't like the lack of efficient access to some of the more common special characters used in programming.
|
||||||
|
|
||||||
|
## Key features / changes
|
||||||
|
|
||||||
|
### Base Layer (L1)
|
||||||
|
|
||||||
|
* **No `MT(mod, kc)` keys (modifier when pressed, key when tapped).** Those keys work with a global timeout. When a key press is shorter than the timeout, it's considered a tap, otherwise it's a hold. I couldn't find any particular timeout that would work for me. I need to use mods extremely fast, but also want the confort of using them more slowly in other occasions. So I gave up on this feature altogether.
|
||||||
|
* **Direct access to `{}[]`.** When programming, these are used extremely often. I was still getting used to the coder layer, and I prefer the arrows on the home row, so I used the bottom-right keys for this.
|
||||||
|
* **Layer keys everywhere.** I either use my little finger or my index finger to go to L1, whichever is more confortable in any given situation. L2 is not used while coding/writing, so I don't need an extremely-optimized access to it.
|
||||||
|
* **Lang key.** This is nothing more than `Super-Space` combo, which in my systems (both Linux & Windows) is the shortcut to change the keyboard language. I'm Portuguese, so I often cycle between US layout for coding, and PT layout for writing.
|
||||||
|
* **Special chars on the right-most column.** I only use Ctrl & Shift keys on the left side, so I used the right keys to include some of the more useful special characters as well.
|
||||||
|
|
||||||
|
### Coder Layer (L2)
|
||||||
|
|
||||||
|
* The `=` and `-` signs where nowhere to be found. `-` was already on the base layer, but it's still useful to have a fully-featured NumPad on the coder layer.
|
||||||
|
|
||||||
|
### Media Layer (L3)
|
||||||
|
|
||||||
|
* **Better media keys**. Why was Play/Pause so far away? And where was Mute? I put all my media keys close to each other, including the missing ones
|
||||||
|
* **Arrow keys on home row.** I use vim, so I'm always on my home row. I use this sometimes to get around, but not as often as to need them on the base row. I'm fine with them here
|
||||||
|
* I don't use mouse keys. They're still set up, and I made some changes as an experiment, but I mostly forgot they exist by now.
|
||||||
|
|
||||||
|
## Author
|
||||||
|
|
||||||
|
[Miguel Palhas](https://github.com/naps62)
|
||||||
File diff suppressed because it is too large
Load Diff
@ -0,0 +1,187 @@
|
|||||||
|
#include "ergodox_ez.h"
|
||||||
|
#include "debug.h"
|
||||||
|
#include "action_layer.h"
|
||||||
|
|
||||||
|
#define BASE 0 // default layer
|
||||||
|
#define SYMB 1 // symbols
|
||||||
|
#define MDIA 2 // media keys
|
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
/* Keymap 0: Basic layer
|
||||||
|
*
|
||||||
|
* ,--------------------------------------------------. ,--------------------------------------------------.
|
||||||
|
* | Esc | 1 ! | 2 @ | 3 # | 4 $ | 5 % | Lang | | Esc | 6 ^ | 7 & | 8 * | 9 ( | 0 ) | Bckspc |
|
||||||
|
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
|
||||||
|
* | Tab | Q | W | E | R | T | L2 | | L2 | Y | U | I | O | P | \ | |
|
||||||
|
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||||
|
* | Ctrl | A | S | D | F | G |------| |------| H | J | K | L | ; : | ' " |
|
||||||
|
* |--------+------+------+------+------+------| L1 | | L1 |------+------+------+------+------+--------|
|
||||||
|
* | LShift | Z | X | C | V | B | | | | N | M | , < | . > | / ? | - _ |
|
||||||
|
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
|
||||||
|
* | L1 | ` ~ | ' " | \ | | L2 | | { | } | [ { | ] } | L1 |
|
||||||
|
* `----------------------------------' `----------------------------------'
|
||||||
|
* ,--------------. ,---------------.
|
||||||
|
* | Home | End | | PgUp |Insert |
|
||||||
|
* ,------|-------|------| |-------+-------+------.
|
||||||
|
* | | | LGui | | Del | | |
|
||||||
|
* | Space| Alt |------| |-------| Enter |Space |
|
||||||
|
* | | | LGui | | Bcsp | | |
|
||||||
|
* `---------------------' `----------------------'
|
||||||
|
*/
|
||||||
|
// If it accepts an argument (i.e, is a function), it doesn't need KC_.
|
||||||
|
// Otherwise, it needs KC_*
|
||||||
|
[BASE] = KEYMAP( // layer 0 : default
|
||||||
|
// left hand
|
||||||
|
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, LGUI(KC_SPC),
|
||||||
|
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, MO(2),
|
||||||
|
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G,
|
||||||
|
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, MO(1),
|
||||||
|
MO(1), KC_GRV, KC_QUOT, KC_BSLS, MO(2),
|
||||||
|
|
||||||
|
KC_HOME, KC_END,
|
||||||
|
KC_LGUI,
|
||||||
|
KC_SPC, KC_LALT, KC_LGUI,
|
||||||
|
|
||||||
|
// right hand
|
||||||
|
KC_ESC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
|
||||||
|
MO(2), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS,
|
||||||
|
KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
|
||||||
|
MO(1), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_MINS,
|
||||||
|
KC_LCBR, KC_RCBR, KC_LBRC, KC_RBRC, MO(1),
|
||||||
|
|
||||||
|
KC_PGUP, KC_INS,
|
||||||
|
KC_DEL,
|
||||||
|
KC_BSPC, KC_ENT, KC_SPC
|
||||||
|
),
|
||||||
|
/* Keymap 1: Symbol Layer
|
||||||
|
*
|
||||||
|
* ,--------------------------------------------------. ,--------------------------------------------------.
|
||||||
|
* | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 |
|
||||||
|
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
|
||||||
|
* | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 |
|
||||||
|
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||||
|
* | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | |
|
||||||
|
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||||
|
* | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | |
|
||||||
|
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
|
||||||
|
* | | | | | | | = | . | 0 | - | |
|
||||||
|
* `----------------------------------' `----------------------------------'
|
||||||
|
* ,-------------. ,-------------.
|
||||||
|
* | | | | | |
|
||||||
|
* ,------|------|------| |------+------+------.
|
||||||
|
* | | | | | | | |
|
||||||
|
* | | |------| |------| | |
|
||||||
|
* | | | | | | | |
|
||||||
|
* `--------------------' `--------------------'
|
||||||
|
*/
|
||||||
|
// SYMBOLS
|
||||||
|
[SYMB] = KEYMAP(
|
||||||
|
// left hand
|
||||||
|
KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS,
|
||||||
|
KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS,
|
||||||
|
KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV,
|
||||||
|
KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS,
|
||||||
|
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
|
||||||
|
KC_TRNS,KC_TRNS,
|
||||||
|
KC_TRNS,
|
||||||
|
KC_TRNS,KC_TRNS,KC_TRNS,
|
||||||
|
// right hand
|
||||||
|
KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
|
||||||
|
KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12,
|
||||||
|
KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS,
|
||||||
|
KC_EQL,KC_DOT, KC_0, KC_MINS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS
|
||||||
|
),
|
||||||
|
/* Keymap 2: Media and mouse keys
|
||||||
|
*
|
||||||
|
* ,--------------------------------------------------. ,--------------------------------------------------.
|
||||||
|
* | | | | | | | | | | | | | | | |
|
||||||
|
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
|
||||||
|
* | | |GuiUp | Expl | | Term | | | | | | | | | |
|
||||||
|
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||||
|
* | |GuiLft|GuiDwn|GuiRgt| | |------| |------| Left | Down | Up |Right | |
|
||||||
|
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||||
|
* | | | | | |Browsr| | | | |VolDwn|VolUp | Mute | | |
|
||||||
|
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
|
||||||
|
* | | | | Lclk | Rclk | | Play | Prev | Next | | |
|
||||||
|
* `----------------------------------' `----------------------------------'
|
||||||
|
* ,-------------. ,-------------.
|
||||||
|
* | | | | | |
|
||||||
|
* ,------|------|------| |------+------+------.
|
||||||
|
* | | | | | |Brwser|Brwser|
|
||||||
|
* | Lclk | Rclk |------| |------|Fwd |Back |
|
||||||
|
* | | | | | | | |
|
||||||
|
* `--------------------' `--------------------'
|
||||||
|
*/
|
||||||
|
// MEDIA AND MOUSE
|
||||||
|
KEYMAP(
|
||||||
|
RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, LGUI(KC_W), LGUI(KC_E), KC_BTN1, LGUI(KC_T), KC_TRNS,
|
||||||
|
KC_TRNS, LGUI(KC_A), LGUI(KC_S), LGUI(KC_D), KC_MS_D, KC_MS_R,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS,
|
||||||
|
KC_BTN1, KC_BTN2, KC_TRNS,
|
||||||
|
// right hand
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS,
|
||||||
|
KC_MPLY, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS,
|
||||||
|
KC_TRNS, KC_WBAK, KC_WFWD
|
||||||
|
),
|
||||||
|
};
|
||||||
|
|
||||||
|
const uint16_t PROGMEM fn_actions[] = {
|
||||||
|
[1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols)
|
||||||
|
};
|
||||||
|
|
||||||
|
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
|
{
|
||||||
|
// MACRODOWN only works in this function
|
||||||
|
switch(id) {
|
||||||
|
case 0:
|
||||||
|
if (record->event.pressed) {
|
||||||
|
register_code(KC_RSFT);
|
||||||
|
} else {
|
||||||
|
unregister_code(KC_RSFT);
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
return MACRO_NONE;
|
||||||
|
};
|
||||||
|
|
||||||
|
// Runs just one time when the keyboard initializes.
|
||||||
|
void * matrix_init_user(void) {
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
|
// Runs constantly in the background, in a loop.
|
||||||
|
void * matrix_scan_user(void) {
|
||||||
|
|
||||||
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
ergodox_board_led_off();
|
||||||
|
ergodox_right_led_1_off();
|
||||||
|
ergodox_right_led_2_off();
|
||||||
|
ergodox_right_led_3_off();
|
||||||
|
switch (layer) {
|
||||||
|
// TODO: Make this relevant to the ErgoDox EZ.
|
||||||
|
case 1:
|
||||||
|
ergodox_right_led_1_on();
|
||||||
|
break;
|
||||||
|
case 2:
|
||||||
|
ergodox_right_led_2_on();
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
// none
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
};
|
||||||
Binary file not shown.
|
After Width: | Height: | Size: 93 KiB |
@ -0,0 +1,27 @@
|
|||||||
|
[{x:3.5},"#\n3",{x:10.5},"*\n8"],
|
||||||
|
[{y:-0.875,x:2.5},"@\n2",{x:1},"$\n4",{x:8.5},"&\n7",{x:1},"(\n9"],
|
||||||
|
[{y:-0.875,x:5.5},"%\n5",{c:"#ff4444"},"Esc",{x:4.5,c:"#cccccc"},"_\n\n\n\n\n\n-","^\n6"],
|
||||||
|
[{y:-0.875,c:"#73ab6a",w:1.5},"~\n\n\n\n\n\n`",{c:"#cccccc"},"!\n1",{x:14.5},")\n0",{t:"#000000\n\n\n\n#0000ff",w:1.5},"+\n\n\n\n\n\n="],
|
||||||
|
[{y:-0.375,x:3.5,t:"#000000"},"E",{x:10.5},"I"],
|
||||||
|
[{y:-0.875,x:2.5},"W",{x:1},"R",{x:8.5},"U",{x:1},"O"],
|
||||||
|
[{y:-0.875,x:5.5},"T",{h:1.5},"{\n\n\n\n\n\n[",{x:4.5,h:1.5},"}\n\n\n\n\n\n]","Y"],
|
||||||
|
[{y:-0.875,c:"#73ab6a",w:1.5},"Tab",{c:"#cccccc"},"Q",{x:14.5},"P",{c:"#2277ff",fa:[0,0,0,1],w:1.5},"|\n\\\nMedia\nL2"],
|
||||||
|
[{y:-0.375,x:3.5,c:"#cccccc"},"D",{x:10.5},"K"],
|
||||||
|
[{y:-0.875,x:2.5},"S",{x:1},"F",{x:8.5},"J",{x:1},"L"],
|
||||||
|
[{y:-0.875,x:5.5},"G",{x:6.5},"H"],
|
||||||
|
[{y:-0.875,c:"#2277ff",w:1.5},"Symbols\n\n\nL1",{c:"#cccccc"},"A",{x:14.5},":\n;",{c:"#2277ff",w:1.5},"\"\n'\nSymbols\nL1"],
|
||||||
|
[{y:-0.625,x:6.5,c:"#bfbf67",h:1.5},"< Tab\n\n\nShift Tab",{x:4.5,h:1.5},"Tab >\n\n\nTab"],
|
||||||
|
[{y:-0.75,x:3.5,c:"#cccccc"},"C",{x:10.5},"<\n,"],
|
||||||
|
[{y:-0.875,x:2.5},"X",{x:1},"V",{x:8.5},"M",{x:1},">\n."],
|
||||||
|
[{y:-0.875,x:5.5},"B",{x:6.5},"N"],
|
||||||
|
[{y:-0.875,c:"#2277ff",w:1.5},"Capitals\n\n\nShift",{c:"#cccccc"},"Z\n\nCtrl",{x:14.5},"?\n/\nCtrl",{c:"#2277ff",w:1.5},"\n\nCapitals\nShift"],
|
||||||
|
[{y:-0.375,x:3.5,c:"#77aaff"},"Option\n\n\nLAlt",{x:10.5},"Option\n\n\nRAlt"],
|
||||||
|
[{y:-0.875,x:2.5},"Hyper",{x:1},"Cmd\n\n\nSuper",{x:8.5},"Cmd\n\n\nSuper",{x:1},"Hyper"],
|
||||||
|
[{y:-0.75,x:0.5},"Ctrl\n\n\nLCtrl","Meh",{x:14.5},"Meh","Ctrl\n\n\nRCtrl"],
|
||||||
|
[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#bfbf67"},"Home","End"],
|
||||||
|
[{h:2},"< Del\n\n\nBackspace",{h:2},"Del >\n\n\nDelete","Page\n\n\n\n\n\nUp"],
|
||||||
|
[{x:2},"Page\n\n\n\n\n\nDown"],
|
||||||
|
[{r:-30,rx:13,y:-1,x:-3},"Left","Right"],
|
||||||
|
[{x:-3},"Up",{h:2},"Enter",{h:2},"Space"],
|
||||||
|
[{x:-3},"Down"]
|
||||||
|
|
||||||
Binary file not shown.
|
After Width: | Height: | Size: 106 KiB |
@ -0,0 +1,27 @@
|
|||||||
|
[{x:3.5,c:"#9988bb"},"Vol\n\n\n\n\n\nMute",{x:10.5,c:"#ccffff"},"Page\n\n\n\n\n\nUp"],
|
||||||
|
[{y:-0.875,x:2.5,c:"#9988bb"},"Sleep",{x:1},"Vol\n\n\n\n\n\nDown",{x:8.5},"Print\n\n\n\n\n\nScreen",{x:1},"Home\n\n\n\n\n\nDir"],
|
||||||
|
[{y:-0.875,x:5.5},"Vol\n\n\n\n\n\nUp",{c:"#ff4444"},"Esc",{x:4.5,c:"#cccccc",a:7},"",""],
|
||||||
|
[{y:-0.875,c:"#ff4444",a:4,w:1.5},"Esc",{c:"#9988bb"},"Shut\n\n\n\n\n\nDown",{x:14.5},"Email",{c:"#cccccc",a:7,w:1.5},""],
|
||||||
|
[{y:-0.375,x:3.5,c:"#ccffff",a:4},"Mouse\n\n\n\n\n\nUp",{x:10.5},"Cursor\n\n\n\n\n\nUp"],
|
||||||
|
[{y:-0.875,x:2.5,c:"#cccccc",a:7},"",{x:1,c:"#99ffff",a:4},"Scroll\n\n\n\n\n\nUp",{x:8.5},"Scroll\n\n\n\n\n\nUp",{x:1,c:"#cccccc",a:7},""],
|
||||||
|
[{y:-0.875,x:5.5},"",{c:"#99ffff",a:4,h:1.5},"Scroll\n\n\n\n\n\nUp",{x:4.5,h:1.5},"Scroll\n\n\n\n\n\nUp",{c:"#cccccc",a:7},""],
|
||||||
|
[{y:-0.875,c:"#000000",t:"#ff0000",a:4,fa:[0,0,0,1],w:1.5},"Media\n\n\nL2",{c:"#cccccc",t:"#000000",a:7},"",{x:14.5},"",{c:"#000000",t:"#ff0000",a:4,w:1.5},"\n\nMedia\nL2"],
|
||||||
|
[{y:-0.375,x:3.5,c:"#ccffff",t:"#000000"},"Mouse\n\n\n\n\n\nDown",{x:10.5},"Cursor\n\n\n\n\n\nDown"],
|
||||||
|
[{y:-0.875,x:2.5},"Mouse\n\n\n\n\n\nLeft",{x:1},"Mouse\n\n\n\n\n\nRight",{x:8.5},"Cursor\n\n\n\n\n\nLeft",{x:1},"Cursor\n\n\n\n\n\nRight"],
|
||||||
|
[{y:-0.875,x:5.5,c:"#cccccc",a:7},"",{x:6.5,c:"#ccffff",a:4},"Home"],
|
||||||
|
[{y:-0.875,c:"#000000",t:"#ff0000",w:1.5},"Symbols\n\n\nL1",{c:"#cccccc",t:"#000000",a:7},"",{x:14.5,c:"#ccffff",a:4},"End",{c:"#cccccc",a:7,w:1.5},""],
|
||||||
|
[{y:-0.625,x:6.5,c:"#99ffff",a:4,h:1.5},"Scroll\n\n\n\n\n\nDown",{x:4.5,h:1.5},"Scroll\n\n\n\n\n\nDown"],
|
||||||
|
[{y:-0.75,x:3.5,c:"#ccffff"},"Mouse\n\n\n\n\n\nDown",{x:10.5},"Cursor\n\n\n\n\n\nDown"],
|
||||||
|
[{y:-0.875,x:2.5,c:"#cccccc",a:7},"",{x:1,c:"#99ffff",a:4},"Scroll\n\n\n\n\n\nDown",{x:8.5},"Scroll\n\n\n\n\n\nDown",{x:1,c:"#cccccc",a:7},""],
|
||||||
|
[{y:-0.875,x:5.5},"",{x:6.5},""],
|
||||||
|
[{y:-0.875,w:1.5},"","",{x:14.5},"",{w:1.5},""],
|
||||||
|
[{y:-0.375,x:3.5,c:"#ccffff",a:4},"Left\n\n\n\n\n\nClick",{x:10.5},"Page\n\n\n\n\n\nDown"],
|
||||||
|
[{y:-0.875,x:2.5,c:"#cccccc",a:7},"",{x:1,c:"#ccffff",a:4},"Right\n\n\n\n\n\nClick",{x:8.5,c:"#cccccc",a:7},"",{x:1},""],
|
||||||
|
[{y:-0.75,x:0.5},"","",{x:14.5},"",""],
|
||||||
|
[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#bbaacc",a:4},"Stop\n\n\nBrowser","Reload\n\n\nBrowser"],
|
||||||
|
[{h:2},"< Web\n\n\nBrowser",{h:2},"Web >\n\n\nBrowser","Search\n\n\nBrowser"],
|
||||||
|
[{x:2},"Home\n\n\nBrowser"],
|
||||||
|
[{r:-30,rx:13,y:-1,x:-3},"Prev\n\n\nAudio\n\n\nTrack","Next\n\n\nAudio\n\n\nTrack"],
|
||||||
|
[{x:-3,c:"#9988bb"},"Vol\n\n\n\n\n\nUp",{c:"#bbaacc",h:2},"Stop\n\n\nAudio",{h:2},"Play\n\n\nAudio\n\n\nPause"],
|
||||||
|
[{x:-3,c:"#9988bb"},"Vol\n\n\n\n\n\nDown"]
|
||||||
|
|
||||||
Binary file not shown.
|
After Width: | Height: | Size: 91 KiB |
@ -0,0 +1,27 @@
|
|||||||
|
[{x:3.5,c:"#a3a3a3"},"F3",{x:10.5},"F8"],
|
||||||
|
[{y:-0.875,x:2.5},"F2",{x:1},"F4",{x:8.5},"F7",{x:1},"F9"],
|
||||||
|
[{y:-0.875,x:5.5},"F5",{c:"#ff4444"},"Esc",{x:4.5,c:"#cccccc",a:7},"",{c:"#a3a3a3",a:4},"F6"],
|
||||||
|
[{y:-0.875,c:"#ff4444",w:1.5},"Esc",{c:"#a3a3a3"},"F1",{x:14.5},"F10",{w:1.5},"F11"],
|
||||||
|
[{y:-0.375,x:3.5,c:"#bbc6ed"},"{",{x:10.5,c:"#bed4ba"},"8"],
|
||||||
|
[{y:-0.875,x:2.5,c:"#bbc6ed"},"@",{x:1},"}",{x:8.5,c:"#bed4ba"},"7",{x:1},"9"],
|
||||||
|
[{y:-0.875,x:5.5,c:"#bbc6ed"},"&",{h:1.5},"<",{x:4.5,h:1.5},">","|"],
|
||||||
|
[{y:-0.875,c:"#2277ff",fa:[0,0,0,1],w:1.5},"Media\n\n\nL2",{c:"#bbc6ed"},"!",{x:14.5,c:"#bed4ba"},"/",{c:"#a3a3a3",w:1.5},"F12"],
|
||||||
|
[{y:-0.375,x:3.5,c:"#bbc6ed"},"(",{x:10.5,c:"#bed4ba"},"5"],
|
||||||
|
[{y:-0.875,x:2.5,c:"#bbc6ed"},"$",{x:1},")",{x:8.5,c:"#bed4ba"},"4",{x:1},"6"],
|
||||||
|
[{y:-0.875,x:5.5,c:"#bbc6ed"},"`",{x:6.5},"/"],
|
||||||
|
[{y:-0.875,c:"#000000",t:"#ff0000",w:1.5},"Symbols\n\n\nL1",{c:"#bbc6ed",t:"#000000"},"#",{x:14.5,c:"#bed4ba"},"*",{c:"#000000",t:"#ff0000",w:1.5},"\n\nSymbols\nL1"],
|
||||||
|
[{y:-0.625,x:6.5,c:"#bfbf67",t:"#000000",h:1.5},"Tab >\n\n\nTab",{x:4.5,h:1.5},"< Tab\n\n\nShift Tab"],
|
||||||
|
[{y:-0.75,x:3.5,c:"#bbc6ed"},"[",{x:10.5,c:"#bed4ba"},"2"],
|
||||||
|
[{y:-0.875,x:2.5,c:"#bbc6ed"},"^",{x:1},"]",{x:8.5,c:"#bed4ba"},"1",{x:1},"3"],
|
||||||
|
[{y:-0.875,x:5.5,c:"#bbc6ed"},"~",{x:6.5},"\\"],
|
||||||
|
[{y:-0.875,c:"#cccccc",a:7,w:1.5},"",{c:"#bbc6ed",a:4},"%",{x:14.5,c:"#bed4ba"},"-",{c:"#2277ff",w:1.5},"\n\nCaps Lock"],
|
||||||
|
[{y:-0.375,x:3.5,c:"#cccccc",a:7},"",{x:10.5,c:"#bed4ba",a:4},"."],
|
||||||
|
[{y:-0.875,x:2.5,c:"#cccccc",a:7},"",{x:1},"",{x:8.5,c:"#bed4ba",a:4},"0",{x:1},"="],
|
||||||
|
[{y:-0.75,x:0.5,c:"#cccccc",a:7},"","",{x:14.5,c:"#bed4ba",a:4},"+","Enter"],
|
||||||
|
[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#bfbf67"},"Left","Right"],
|
||||||
|
[{h:2},"Space",{h:2},"Enter","Up"],
|
||||||
|
[{x:2},"Down"],
|
||||||
|
[{r:-30,rx:13,y:-1,x:-3},"Home","End"],
|
||||||
|
[{x:-3},"Page\n\n\n\n\n\nUp",{h:2},"< Del\n\n\nBackspace",{h:2},"Del >\n\n\nDelete"],
|
||||||
|
[{x:-3},"Page\n\n\n\n\n\nDown"]
|
||||||
|
|
||||||
File diff suppressed because it is too large
Load Diff
Binary file not shown.
|
Before Width: | Height: | Size: 91 KiB |
@ -1,5 +1,9 @@
|
|||||||
# The Ordinary Layout. for users of common keyboards
|
# The Ordinary Layout, a familiar and powerful layout
|
||||||
|
|
||||||
You can read more about the reasoning behind this layout over at [Nicholas's blog](http://nicholas.rinard.us/2016/03/ergodox-ez-layout.html). The idea is to make a layout that's as familiar as possible for users of "regular" keyboards.
|
The Ordinary Layout is intended to be unremarkably mundane and remarkably useful. This layout maintains most key positions from common QWERTY keyboards and features enhanced Symbol and Media layers compared to the default Ergodox EZ layout.
|
||||||
|
|
||||||
|
Full details about the rationale behind this layout [are available](http://nicholas.rinard.us/2016/03/ergodox-ez-layout.html).
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|||||||
@ -0,0 +1,139 @@
|
|||||||
|
#----------------------------------------------------------------------------
|
||||||
|
# On command line:
|
||||||
|
#
|
||||||
|
# make all = Make software.
|
||||||
|
#
|
||||||
|
# make clean = Clean out built project files.
|
||||||
|
#
|
||||||
|
# make coff = Convert ELF to AVR COFF.
|
||||||
|
#
|
||||||
|
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||||
|
#
|
||||||
|
# make program = Download the hex file to the device.
|
||||||
|
# Please customize your programmer settings(PROGRAM_CMD)
|
||||||
|
#
|
||||||
|
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||||
|
# (must have teensy_loader_cli installed).
|
||||||
|
#
|
||||||
|
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||||
|
# have dfu-programmer installed).
|
||||||
|
#
|
||||||
|
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||||
|
# have Atmel FLIP installed).
|
||||||
|
#
|
||||||
|
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||||
|
# (must have dfu-programmer installed).
|
||||||
|
#
|
||||||
|
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||||
|
# (must have Atmel FLIP installed).
|
||||||
|
#
|
||||||
|
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||||
|
# with avr-gdb or avr-insight as the front end for debugging.
|
||||||
|
#
|
||||||
|
# make filename.s = Just compile filename.c into the assembler code only.
|
||||||
|
#
|
||||||
|
# make filename.i = Create a preprocessed source file for use in submitting
|
||||||
|
# bug reports to the GCC project.
|
||||||
|
#
|
||||||
|
# To rebuild project do "make clean" then "make all".
|
||||||
|
#----------------------------------------------------------------------------
|
||||||
|
|
||||||
|
# Target file name (without extension).
|
||||||
|
TARGET = retro_refit
|
||||||
|
|
||||||
|
|
||||||
|
# Directory common source filess exist
|
||||||
|
TOP_DIR = ../..
|
||||||
|
TMK_DIR = ../../tmk_core
|
||||||
|
|
||||||
|
# Directory keyboard dependent files exist
|
||||||
|
TARGET_DIR = .
|
||||||
|
|
||||||
|
# # project specific files
|
||||||
|
SRC = retro_refit.c
|
||||||
|
|
||||||
|
ifdef KEYMAP
|
||||||
|
SRC := keymaps/$(KEYMAP).c $(SRC)
|
||||||
|
else
|
||||||
|
SRC := keymaps/default.c $(SRC)
|
||||||
|
endif
|
||||||
|
|
||||||
|
CONFIG_H = config.h
|
||||||
|
|
||||||
|
# MCU name
|
||||||
|
#MCU = at90usb1287
|
||||||
|
MCU = atmega32u4
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 16000000
|
||||||
|
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task(+60)
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
|
||||||
|
# Boot Section Size in *bytes*
|
||||||
|
# Teensy halfKay 512
|
||||||
|
# Teensy++ halfKay 1024
|
||||||
|
# Atmel DFU loader 4096
|
||||||
|
# LUFA bootloader 4096
|
||||||
|
# USBaspLoader 2048
|
||||||
|
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||||
|
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# comment out to disable the options.
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
|
# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||||
|
# NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||||
|
# MIDI_ENABLE = YES # MIDI controls
|
||||||
|
# UNICODE_ENABLE = YES # Unicode
|
||||||
|
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
|
||||||
|
|
||||||
|
# Optimize size but this may cause error "relocation truncated to fit"
|
||||||
|
#EXTRALDFLAGS = -Wl,--relax
|
||||||
|
|
||||||
|
# Search Path
|
||||||
|
VPATH += $(TARGET_DIR)
|
||||||
|
VPATH += $(TOP_DIR)
|
||||||
|
VPATH += $(TMK_DIR)
|
||||||
|
|
||||||
|
include $(TOP_DIR)/quantum/quantum.mk
|
||||||
|
|
||||||
@ -0,0 +1,24 @@
|
|||||||
|
retro_refit keyboard firmware
|
||||||
|
======================
|
||||||
|
|
||||||
|
## Quantum MK Firmware
|
||||||
|
|
||||||
|
For the full Quantum feature list, see [the parent README.md](/README.md).
|
||||||
|
|
||||||
|
## Building
|
||||||
|
|
||||||
|
Download or clone the whole firmware and navigate to the keyboard/retro_refit folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
|
||||||
|
|
||||||
|
Depending on which keymap you would like to use, you will have to compile slightly differently.
|
||||||
|
|
||||||
|
### Default
|
||||||
|
To build with the default keymap, simply run `make`.
|
||||||
|
|
||||||
|
### Other Keymaps
|
||||||
|
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top README.md) and existent keymap files.
|
||||||
|
|
||||||
|
To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
|
||||||
|
```
|
||||||
|
$ make KEYMAP=[default|jack|<name>]
|
||||||
|
```
|
||||||
|
Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
|
||||||
@ -0,0 +1,79 @@
|
|||||||
|
/*
|
||||||
|
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 2 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef CONFIG_H
|
||||||
|
#define CONFIG_H
|
||||||
|
|
||||||
|
#include "config_common.h"
|
||||||
|
|
||||||
|
/* USB Device descriptor parameter */
|
||||||
|
#define VENDOR_ID 0xFEED
|
||||||
|
#define PRODUCT_ID 0x6060
|
||||||
|
#define DEVICE_VER 0x0001
|
||||||
|
#define MANUFACTURER Nobody
|
||||||
|
#define PRODUCT retro_refit
|
||||||
|
#define DESCRIPTION Retro Refit
|
||||||
|
|
||||||
|
/* key matrix size */
|
||||||
|
#define MATRIX_ROWS 11
|
||||||
|
#define MATRIX_COLS 8
|
||||||
|
|
||||||
|
// See note in retro_refit.h for an explanation of how this matrix is wired up
|
||||||
|
#define COLS (int []){ B0, B1, B2, B3, D2, D3, C7, D5 }
|
||||||
|
#define ROWS (int []){ D4, D7, B4, B5, B6, F7, F6, F5, F4, F1, F0 }
|
||||||
|
|
||||||
|
/* COL2ROW or ROW2COL */
|
||||||
|
#define DIODE_DIRECTION COL2ROW
|
||||||
|
|
||||||
|
/* define if matrix has ghost */
|
||||||
|
//#define MATRIX_HAS_GHOST
|
||||||
|
|
||||||
|
/* number of backlight levels */
|
||||||
|
#define BACKLIGHT_LEVELS 0
|
||||||
|
|
||||||
|
/* Set 0 if debouncing isn't needed */
|
||||||
|
#define DEBOUNCE 5
|
||||||
|
|
||||||
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||||
|
#define LOCKING_SUPPORT_ENABLE
|
||||||
|
/* Locking resynchronize hack */
|
||||||
|
#define LOCKING_RESYNC_ENABLE
|
||||||
|
|
||||||
|
/* key combination for command */
|
||||||
|
#define IS_COMMAND() ( \
|
||||||
|
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||||
|
)
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Feature disable options
|
||||||
|
* These options are also useful to firmware size reduction.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* disable debug print */
|
||||||
|
//#define NO_DEBUG
|
||||||
|
|
||||||
|
/* disable print */
|
||||||
|
//#define NO_PRINT
|
||||||
|
|
||||||
|
/* disable action features */
|
||||||
|
//#define NO_ACTION_LAYER
|
||||||
|
//#define NO_ACTION_TAPPING
|
||||||
|
//#define NO_ACTION_ONESHOT
|
||||||
|
//#define NO_ACTION_MACRO
|
||||||
|
//#define NO_ACTION_FUNCTION
|
||||||
|
|
||||||
|
#endif
|
||||||
@ -0,0 +1,33 @@
|
|||||||
|
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
|
||||||
|
// this is the style you want to emulate.
|
||||||
|
|
||||||
|
#include "retro_refit.h"
|
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
[0] =
|
||||||
|
KEYMAP( ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, NLCK, SLCK, PSCR, PAUS, \
|
||||||
|
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, HOME, \
|
||||||
|
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, PGUP, \
|
||||||
|
BSLS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, PGDN, \
|
||||||
|
LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, UP, END, \
|
||||||
|
LCTL, LGUI, LALT, SPC, INS, DEL, LEFT, DOWN, RGHT),
|
||||||
|
};
|
||||||
|
|
||||||
|
const uint16_t PROGMEM fn_actions[] = {
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
|
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
|
{
|
||||||
|
// MACRODOWN only works in this function
|
||||||
|
switch(id) {
|
||||||
|
case 0:
|
||||||
|
if (record->event.pressed) {
|
||||||
|
register_code(KC_RSFT);
|
||||||
|
} else {
|
||||||
|
unregister_code(KC_RSFT);
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
return MACRO_NONE;
|
||||||
|
};
|
||||||
@ -0,0 +1,68 @@
|
|||||||
|
#include "retro_refit.h"
|
||||||
|
|
||||||
|
__attribute__ ((weak))
|
||||||
|
void matrix_init_user(void) {
|
||||||
|
// leave this function blank - it can be defined in a keymap file
|
||||||
|
};
|
||||||
|
|
||||||
|
__attribute__ ((weak))
|
||||||
|
void matrix_scan_user(void) {
|
||||||
|
// leave this function blank - it can be defined in a keymap file
|
||||||
|
};
|
||||||
|
|
||||||
|
__attribute__ ((weak))
|
||||||
|
void led_set_user(uint8_t usb_led) {
|
||||||
|
// leave this function blank - it can be defined in a keymap file
|
||||||
|
};
|
||||||
|
|
||||||
|
void matrix_init_kb(void) {
|
||||||
|
// put your keyboard start-up code here
|
||||||
|
// runs once when the firmware starts up
|
||||||
|
|
||||||
|
// Disable status LED on KB, enable status LED on Teensy (KB_STATUS = !TEENSY_STATUS)
|
||||||
|
DDRD |= (1<<6);
|
||||||
|
PORTD |= (1<<6);
|
||||||
|
|
||||||
|
matrix_init_user();
|
||||||
|
};
|
||||||
|
|
||||||
|
void amatrix_scan_kb(void) {
|
||||||
|
// put your looping keyboard code here
|
||||||
|
// runs every cycle (a lot)
|
||||||
|
|
||||||
|
matrix_scan_user();
|
||||||
|
};
|
||||||
|
|
||||||
|
void led_set_kb(uint8_t usb_led) {
|
||||||
|
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||||
|
|
||||||
|
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||||
|
// output low
|
||||||
|
DDRD |= (1<<0);
|
||||||
|
PORTD &= ~(1<<0);
|
||||||
|
} else {
|
||||||
|
// Hi-Z
|
||||||
|
DDRD &= ~(1<<0);
|
||||||
|
PORTD &= ~(1<<0);
|
||||||
|
}
|
||||||
|
if (usb_led & (1<<USB_LED_NUM_LOCK)) {
|
||||||
|
// output low
|
||||||
|
DDRD |= (1<<1);
|
||||||
|
PORTD &= ~(1<<1);
|
||||||
|
} else {
|
||||||
|
// Hi-Z
|
||||||
|
DDRD &= ~(1<<1);
|
||||||
|
PORTD &= ~(1<<1);
|
||||||
|
}
|
||||||
|
if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
|
||||||
|
// output low
|
||||||
|
DDRC |= (1<<6);
|
||||||
|
PORTC &= ~(1<<6);
|
||||||
|
} else {
|
||||||
|
// Hi-Z
|
||||||
|
DDRC &= ~(1<<6);
|
||||||
|
PORTC &= ~(1<<6);
|
||||||
|
}
|
||||||
|
|
||||||
|
led_set_user(usb_led);
|
||||||
|
};
|
||||||
@ -0,0 +1,45 @@
|
|||||||
|
#ifndef RETRO_REFIT_H
|
||||||
|
#define RETRO_REFIT_H
|
||||||
|
|
||||||
|
#include "matrix.h"
|
||||||
|
#include "keymap_common.h"
|
||||||
|
#include "led.h"
|
||||||
|
#include <stddef.h>
|
||||||
|
|
||||||
|
// This macro is an example of using a non-standard row-column matrix. The
|
||||||
|
// keyboard in question had 11 rows and 8 columns, but the rows were not all
|
||||||
|
// horizontal, and the columns were not all vertical. For example, row 2
|
||||||
|
// contained "Print Screen", "N", "M", ",", ".", "/", "Right Shift", and
|
||||||
|
// "Left Alt". Column 0 contained "F6", "7", "O", "'", "Q", "D", "B",
|
||||||
|
// "Left Alt", "Up Arrow", and "Down Arrow".
|
||||||
|
//
|
||||||
|
// The macro makes programming the keys easier and in a more straight-forward
|
||||||
|
// manner because it realigns the keys into a 6x15 sensible keyboard layout
|
||||||
|
// instead of the obtuse 11x8 matrix.
|
||||||
|
|
||||||
|
#define KEYMAP( \
|
||||||
|
K77, K05, K04, K03, K02, K01, K00, KA7, KA6, KA5, KA4, KA3, KA2, K11, K94, \
|
||||||
|
K27, K76, K75, K74, K73, K72, K71, K70, K67, K66, K65, K64, K63, K62, KA1, \
|
||||||
|
K61, K60, K57, K56, K55, K54, K53, K52, K51, K50, K47, K46, K45, K97, \
|
||||||
|
K43, K42, K41, K40, K37, K36, K35, K34, K33, K32, K31, K30, K44, K87, \
|
||||||
|
K26, K24, K23, K22, K21, K20, K17, K16, K15, K14, K13, K12, KA0, K91, \
|
||||||
|
K10, K06, K25, K07, K86, K85, K95, K90, K93 \
|
||||||
|
) { \
|
||||||
|
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, }, \
|
||||||
|
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, }, \
|
||||||
|
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, }, \
|
||||||
|
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, }, \
|
||||||
|
{ KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47, }, \
|
||||||
|
{ KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57, }, \
|
||||||
|
{ KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67, }, \
|
||||||
|
{ KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77, }, \
|
||||||
|
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K85, KC_##K86, KC_##K87, }, \
|
||||||
|
{ KC_##K90, KC_##K91, KC_NO, KC_##K93, KC_##K94, KC_##K95, KC_NO, KC_##K97, }, \
|
||||||
|
{ KC_##KA0, KC_##KA1, KC_##KA2, KC_##KA3, KC_##KA4, KC_##KA5, KC_##KA6, KC_##KA7, } \
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_init_user(void);
|
||||||
|
void matrix_scan_user(void);
|
||||||
|
void led_set_user(uint8_t usb_led);
|
||||||
|
|
||||||
|
#endif
|
||||||
@ -1 +0,0 @@
|
|||||||
Subproject commit 19892c196894e6676fa69c732e05a03a68d5cb07
|
|
||||||
Loading…
Reference in New Issue