Establish support for AMJPAD
TerryMathews
8 years ago
parent
6dbcc50f56
commit
925ed44405
@ -0,0 +1,3 @@
|
|||||||
|
ifndef MAKEFILE_INCLUDED
|
||||||
|
include ../../Makefile
|
||||||
|
endif
|
||||||
@ -0,0 +1,30 @@
|
|||||||
|
#include "amjpad.h"
|
||||||
|
#include "led.h"
|
||||||
|
|
||||||
|
void matrix_init_kb(void) {
|
||||||
|
// put your keyboard start-up code here
|
||||||
|
// runs once when the firmware starts up
|
||||||
|
matrix_init_user();
|
||||||
|
led_init_ports();
|
||||||
|
};
|
||||||
|
|
||||||
|
void matrix_scan_kb(void) {
|
||||||
|
// put your looping keyboard code here
|
||||||
|
// runs every cycle (a lot)
|
||||||
|
matrix_scan_user();
|
||||||
|
};
|
||||||
|
|
||||||
|
void led_init_ports(void) {
|
||||||
|
// * Set our LED pins as output
|
||||||
|
DDRD |= (1<<6);
|
||||||
|
}
|
||||||
|
|
||||||
|
void led_set_kb(uint8_t usb_led) {
|
||||||
|
if (usb_led & (1<<USB_LED_NUM_LOCK)) {
|
||||||
|
// Turn numlock on
|
||||||
|
PORTD &= ~(1<<6);
|
||||||
|
} else {
|
||||||
|
// Turn numlock off
|
||||||
|
PORTD |= (1<<6);
|
||||||
|
}
|
||||||
|
}
|
||||||
@ -0,0 +1,46 @@
|
|||||||
|
#ifndef AMJPAD_H
|
||||||
|
#define ADMJPAD_H
|
||||||
|
|
||||||
|
#include "quantum.h"
|
||||||
|
|
||||||
|
// readability
|
||||||
|
#define XXX KC_NO
|
||||||
|
|
||||||
|
/* AMJPAD matrix layout
|
||||||
|
* ,-------------------.
|
||||||
|
* | 00 | 01 | 02 | 03 |
|
||||||
|
* |----|----|----|----|
|
||||||
|
* | 10 | 11 | 12 | 13 |
|
||||||
|
* |----|----|----|----|
|
||||||
|
* | 20 | 21 | 22 | |
|
||||||
|
* |----|----|----| 23 |
|
||||||
|
* | 30 | 31 | 32 | |
|
||||||
|
* |----|----|----|----|
|
||||||
|
* | 40 | 41 | 42 | |
|
||||||
|
* |----|----|----| 43 |
|
||||||
|
* | 50 | 52 | |
|
||||||
|
* `-------------------'
|
||||||
|
*/
|
||||||
|
// The first section contains all of the arguments
|
||||||
|
// The second converts the arguments into a two-dimensional array
|
||||||
|
#define KEYMAP( \
|
||||||
|
k00, k01, k02, k03, \
|
||||||
|
k10, k11, k12, k13, \
|
||||||
|
k20, k21, k22, k23, \
|
||||||
|
k30, k31, k32, \
|
||||||
|
k40, k41, k42, k43, \
|
||||||
|
k50, k52 \
|
||||||
|
) \
|
||||||
|
{ \
|
||||||
|
{k00, k01, k02, k03}, \
|
||||||
|
{k10, k11, k12, k13}, \
|
||||||
|
{k20, k21, k22, k23}, \
|
||||||
|
{k30, k31, k32, XXX}, \
|
||||||
|
{k40, k41, k42, k43}, \
|
||||||
|
{k50, XXX, k52, XXX} \
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_init_user(void);
|
||||||
|
void matrix_scan_user(void);
|
||||||
|
|
||||||
|
#endif
|
||||||
@ -0,0 +1,94 @@
|
|||||||
|
/*
|
||||||
|
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 2 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef CONFIG_H
|
||||||
|
#define CONFIG_H
|
||||||
|
|
||||||
|
#include "config_common.h"
|
||||||
|
|
||||||
|
/* USB Device descriptor parameter */
|
||||||
|
#define VENDOR_ID 0xFEED
|
||||||
|
#define PRODUCT_ID 0x6060
|
||||||
|
#define DEVICE_VER 0x0003
|
||||||
|
#define MANUFACTURER AMJ
|
||||||
|
#define PRODUCT PAD
|
||||||
|
#define DESCRIPTION QMK keyboard firmware for AMJ PAD
|
||||||
|
|
||||||
|
/* key matrix size */
|
||||||
|
#define MATRIX_ROWS 6
|
||||||
|
#define MATRIX_COLS 4
|
||||||
|
|
||||||
|
// ROWS: Top to bottom, COLS: Left to right
|
||||||
|
|
||||||
|
#define MATRIX_ROW_PINS { F7, F6, F5, F4, D5, D0 }
|
||||||
|
#define MATRIX_COL_PINS { F1, F0, E6, C7 }
|
||||||
|
#define UNUSED_PINS
|
||||||
|
|
||||||
|
#define BACKLIGHT_PIN B6
|
||||||
|
|
||||||
|
/* COL2ROW or ROW2COL */
|
||||||
|
#define DIODE_DIRECTION COL2ROW
|
||||||
|
|
||||||
|
/* define if matrix has ghost */
|
||||||
|
//#define MATRIX_HAS_GHOST
|
||||||
|
|
||||||
|
/* Set 0 if debouncing isn't needed */
|
||||||
|
#define DEBOUNCING_DELAY 5
|
||||||
|
|
||||||
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||||
|
#define LOCKING_SUPPORT_ENABLE
|
||||||
|
/* Locking resynchronize hack */
|
||||||
|
#define LOCKING_RESYNC_ENABLE
|
||||||
|
|
||||||
|
/* key combination for command */
|
||||||
|
#define IS_COMMAND() ( \
|
||||||
|
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||||
|
)
|
||||||
|
|
||||||
|
/* Backlight configuration
|
||||||
|
*/
|
||||||
|
#define BACKLIGHT_LEVELS 4
|
||||||
|
|
||||||
|
/* Underlight configuration
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define RGB_DI_PIN E2
|
||||||
|
#define RGBLIGHT_ANIMATIONS
|
||||||
|
#define RGBLED_NUM 8 // Number of LEDs
|
||||||
|
#define RGBLIGHT_HUE_STEP 10
|
||||||
|
#define RGBLIGHT_SAT_STEP 17
|
||||||
|
#define RGBLIGHT_VAL_STEP 17
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Feature disable options
|
||||||
|
* These options are also useful to firmware size reduction.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* disable debug print */
|
||||||
|
//#define NO_DEBUG
|
||||||
|
|
||||||
|
/* disable print */
|
||||||
|
//#define NO_PRINT
|
||||||
|
|
||||||
|
/* disable action features */
|
||||||
|
//#define NO_ACTION_LAYER
|
||||||
|
//#define NO_ACTION_TAPPING
|
||||||
|
//#define NO_ACTION_ONESHOT
|
||||||
|
//#define NO_ACTION_MACRO
|
||||||
|
//#define NO_ACTION_FUNCTION
|
||||||
|
|
||||||
|
#endif
|
||||||
@ -0,0 +1,101 @@
|
|||||||
|
#include "amjpad.h"
|
||||||
|
|
||||||
|
#ifdef RGBLIGHT_ENABLE
|
||||||
|
#include "rgblight.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// Used for SHIFT_ESC
|
||||||
|
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
|
||||||
|
|
||||||
|
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||||
|
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||||
|
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||||
|
// entirely and just use numbers.
|
||||||
|
#define _BL 0
|
||||||
|
#define _FL 1
|
||||||
|
|
||||||
|
#define _______ KC_TRNS
|
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
/* Keymap _BL: (Base Layer) Default Layer
|
||||||
|
* ,-------------------.
|
||||||
|
* |Esc |TAB |BS | = |
|
||||||
|
* |----|----|----|----|
|
||||||
|
* | NL | / | * | - |
|
||||||
|
* |----|----|----|----|
|
||||||
|
* | 7 | 8 | 9 | |
|
||||||
|
* |----|----|----| + |
|
||||||
|
* | 4 | 5 | 6 | |
|
||||||
|
* |----|----|----|----|
|
||||||
|
* | 1 | 2 | 3 | |
|
||||||
|
* |----|----|----| En |
|
||||||
|
* | 0 |./FN| |
|
||||||
|
* `-------------------'
|
||||||
|
*/
|
||||||
|
|
||||||
|
[_BL] = KEYMAP(
|
||||||
|
KC_ESC,KC_TAB,KC_BSPC,KC_PEQL, \
|
||||||
|
KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
|
||||||
|
KC_P7, KC_P8, KC_P9, KC_PPLS, \
|
||||||
|
KC_P4, KC_P5, KC_P6, \
|
||||||
|
KC_P1, KC_P2, KC_P3, KC_PENT, \
|
||||||
|
KC_P0, LT(_FL,KC_PDOT)),
|
||||||
|
|
||||||
|
/* Keymap _FL: Function Layer
|
||||||
|
* ,-------------------.
|
||||||
|
* |Esc |TAB |BS | = |
|
||||||
|
* |----|----|----|----|
|
||||||
|
* | NL | / | * | - |
|
||||||
|
* |----|----|----|----|
|
||||||
|
* | 7 | 8 | 9 | |
|
||||||
|
* |----|----|----|RST |
|
||||||
|
* | 4 | 5 | 6 | |
|
||||||
|
* |----|----|----|----|
|
||||||
|
* | 1 | 2 | 3 | |
|
||||||
|
* |----|----|----| En |
|
||||||
|
* | 0 |./FN| |
|
||||||
|
* `-------------------'
|
||||||
|
*/
|
||||||
|
[_FL] = KEYMAP(
|
||||||
|
|
||||||
|
KC_ESC,KC_TAB,KC_BSPC,KC_PEQL, \
|
||||||
|
KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
|
||||||
|
KC_P7, KC_P8, KC_P9, RESET, \
|
||||||
|
KC_P4, KC_P5, KC_P6, \
|
||||||
|
KC_P1, KC_P2, KC_P3, KC_PENT, \
|
||||||
|
KC_P0, LT(_FL,KC_PDOT)),
|
||||||
|
};
|
||||||
|
|
||||||
|
enum function_id {
|
||||||
|
SHIFT_ESC,
|
||||||
|
};
|
||||||
|
|
||||||
|
const uint16_t PROGMEM fn_actions[] = {
|
||||||
|
[0] = ACTION_FUNCTION(SHIFT_ESC),
|
||||||
|
};
|
||||||
|
|
||||||
|
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||||
|
static uint8_t shift_esc_shift_mask;
|
||||||
|
switch (id) {
|
||||||
|
case SHIFT_ESC:
|
||||||
|
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
|
||||||
|
if (record->event.pressed) {
|
||||||
|
if (shift_esc_shift_mask) {
|
||||||
|
add_key(KC_GRV);
|
||||||
|
send_keyboard_report();
|
||||||
|
} else {
|
||||||
|
add_key(KC_ESC);
|
||||||
|
send_keyboard_report();
|
||||||
|
}
|
||||||
|
} else {
|
||||||
|
if (shift_esc_shift_mask) {
|
||||||
|
del_key(KC_GRV);
|
||||||
|
send_keyboard_report();
|
||||||
|
} else {
|
||||||
|
del_key(KC_ESC);
|
||||||
|
send_keyboard_report();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
}
|
||||||
@ -0,0 +1,66 @@
|
|||||||
|
|
||||||
|
# MCU name
|
||||||
|
#MCU = at90usb1287
|
||||||
|
MCU = atmega32u4
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 16000000
|
||||||
|
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task(+60)
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
|
||||||
|
# Boot Section Size in *bytes*
|
||||||
|
# Teensy halfKay 512
|
||||||
|
# Teensy++ halfKay 1024
|
||||||
|
# Atmel DFU loader 4096
|
||||||
|
# LUFA bootloader 4096
|
||||||
|
# USBaspLoader 2048
|
||||||
|
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||||
|
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# comment out to disable the options.
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||||
|
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality (+4870)
|
||||||
|
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150)
|
||||||
|
MIDI_ENABLE ?= no # MIDI controls
|
||||||
|
AUDIO_ENABLE ?= no
|
||||||
|
UNICODE_ENABLE ?= no # Unicode
|
||||||
|
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
Loading…
Reference in New Issue