Merge branch 'master' of https://github.com/jackhumbert/qmk_firmware

keyboard/Bantam44/Bantam44.c

@@ -0,0 +1,25 @@
+#include "Bantam44.h"
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+	// leave these blank
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+	// leave these blank
+}
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}

keyboard/Bantam44/Bantam44.h

@@ -0,0 +1,29 @@
+#ifndef BANTAM44_H
+#define BANTAM44_H
+
+#include "matrix.h"
+#include "keymap_common.h"
+#include "backlight.h"
+#include <stddef.h>
+
+// This a shortcut to help you visually see your layout.
+// The following is an example using the Planck MIT layout
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+    K10,   K11, K12, K13, K14, K15, K16, K17, K18, K19,    K1A, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+    K30,   K31,   K32,   K33,     K34,    K35,   K36, K37, K38  \
+) \
+{ \
+    { K00, K01, K02, K03,   K04, K05,   K06, K07,   K08, K09, K0A,   K0B   }, \
+    { K10, K11, K12, K13,   K14, K15,   K16, K17,   K18, K19, KC_NO, K2A }, \
+	{ K20, K21, K22, K23,   K24, K25,   K26, K27,   K28, K29, K2A,   K2B   }, \
+	{ K30, K31, K32, KC_NO, K33, KC_NO, K34, KC_NO, K35, K36, K37,   K38   }, \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#endif

keyboard/Bantam44/Makefile

@@ -0,0 +1,139 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = Bantam44
+
+
+# Directory common source filess exist
+TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# # project specific files
+SRC = Bantam44.c
+
+ifdef KEYMAP
+    SRC := keymaps/$(KEYMAP).c $(SRC)
+else
+    SRC := keymaps/default.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+# NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+# MIDI_ENABLE = YES 		# MIDI controls
+# UNICODE_ENABLE = YES 		# Unicode
+# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
+
+
+# Optimize size but this may cause error "relocation truncated to fit"
+#EXTRALDFLAGS = -Wl,--relax
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
+
+include $(TOP_DIR)/quantum/quantum.mk
+

keyboard/Bantam44/README.md

@@ -0,0 +1,24 @@
+Bantam44 keyboard firmware
+======================
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent README.md](/README.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboard/Bantam44 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+To build with the default keymap, simply run `make`.
+
+### Other Keymaps
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top README.md) and existent keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
+```
+$ make KEYMAP=[default|jack|<name>]
+```
+Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.

keyboard/Bantam44/config.h

@@ -0,0 +1,81 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Bantam Keyboards
+#define PRODUCT         Bantam44
+#define DESCRIPTION     A custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+// Planck PCB default pin-out
+// Change this to how you wired your keyboard
+// COLS: Left to right, ROWS: Top to bottom
+#define COLS (int []){ B0, B1, B2, B3, B7, D0, B6, F7, F6, F5, F4, F1 }
+#define ROWS (int []){ F0, D6, D4, D5 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif

keyboard/Bantam44/keymaps/default.c

@@ -0,0 +1,30 @@
+#include "Bantam44.h"
+ 
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = { /* Base */
+        {KC_ESC,  KC_Q,    KC_W,     KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC },
+        {KC_TAB,  KC_A,    KC_S,     KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_NO,   KC_ENT  },
+        {KC_CAPS, KC_LSFT, KC_Z,     KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_RSFT },
+        {KC_LCTL, KC_LGUI, KC_LALT,  KC_NO,   MO(1),   KC_NO,   KC_SPC,  KC_NO,   MO(2),   KC_SCLN, KC_QUOT, KC_SLSH }
+    },
+    [1] = { /* LOWER */
+        {KC_ESC,  KC_1,    KC_2,     KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DELT },
+        {KC_TAB,  KC_MPRV, KC_MPLY,  KC_MNXT, KC_GRV,  KC_BSLS, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_NO,   KC_ENT  },
+        {KC_CAPS, KC_LSFT, KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_NO,   KC_HOME, KC_PGUP, KC_RSFT },
+        {KC_LCTL, KC_LGUI, KC_LALT,  KC_NO,   KC_TRNS, KC_NO,   KC_SPC,  KC_NO,   KC_TRNS, KC_END,  KC_PGDN, KC_EXLM }
+    },
+    [2] = { /* RAISE */
+        {KC_ESC,  KC_EXLM, KC_AT,    KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DELT },
+        {KC_TAB,  KC_MUTE, KC_VOLD,  KC_VOLU, KC_TILD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_NO,   KC_ENT  },
+        {KC_CAPS, KC_LSFT, KC_F7,    KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NO,   KC_NO,   KC_UP,   KC_RSFT },
+        {KC_LCTL, KC_LGUI, KC_LALT,  KC_NO,   KC_TRNS, KC_NO,   KC_SPC,  KC_NO,   KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT }
+    }
+};
+ 
+const uint16_t PROGMEM fn_actions[] = {
+};
+ 
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // MACRODOWN only works in this function
+{
+    return MACRO_NONE;
+};

keyboard/atomic/atomic.c

@@ -1,16 +1,16 @@
 #include "atomic.h"
 
 __attribute__ ((weak))
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 	// leave these blank
-};
+}
 
 __attribute__ ((weak))
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 	// leave these blank
-};
+}
 
-void * matrix_init_kb(void) {
+void matrix_init_kb(void) {
 	// put your keyboard start-up code here
 	// runs once when the firmware starts up
 
@@ -25,16 +25,12 @@ void * matrix_init_kb(void) {
     DDRE |= (1<<6);
     PORTE |= (1<<6);
 
-	if (matrix_init_user) {
+	matrix_init_user();
-		(*matrix_init_user)();
 }
-};
 
-void * matrix_scan_kb(void) {
+void matrix_scan_kb(void) {
 	// put your looping keyboard code here
 	// runs every cycle (a lot)
 
-	if (matrix_scan_user) {
+	matrix_scan_user();
-		(*matrix_scan_user)();
 }
-};

keyboard/atomic/atomic.h

@@ -24,7 +24,7 @@
     { K40, K41, KC_NO, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B,   K4C,   K4D,   K4E }  \
 }
 
-void * matrix_init_user(void);
+void matrix_init_user(void);
-void * matrix_scan_user(void);
+void matrix_scan_user(void);
 
 #endif

keyboard/atreus/atreus.c

@@ -1,16 +1,16 @@
 #include "atreus.h"
 
 __attribute__ ((weak))
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 	// leave these blank
 };
 
 __attribute__ ((weak))
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 	// leave these blank
 };
 
-void * matrix_init_kb(void) {
+void matrix_init_kb(void) {
 	// put your keyboard start-up code here
 	// runs once when the firmware starts up
 
@@ -19,7 +19,7 @@ void * matrix_init_kb(void) {
 	}
 };
 
-void * matrix_scan_kb(void) {
+void matrix_scan_kb(void) {
 	// put your looping keyboard code here
 	// runs every cycle (a lot)
 

keyboard/atreus/atreus.h

@@ -22,7 +22,7 @@
 	{ k2a, k30, k31, k32, k33, k34,   k36, k37, k38, k39, k3a } \
 }
 
-void * matrix_init_user(void);
+void matrix_init_user(void);
-void * matrix_scan_user(void);
+void matrix_scan_user(void);
 
 #endif

keyboard/ergodox_ez/190hotfix.sh

@@ -0,0 +1,19 @@
+#!/bin/bash
+#a tool to fix broken keymaps as a result of pull request #190 
+#changing the declaration of matrix_scan_user() and matrix_init_user()
+#
+#This script will save a copy of the specified keymap as keymap.c.bak
+#and then create a new keymap.c with the definion corrected.
+#this script must be run from the ergodox_ez directory
+if [ $# -ne 1 ]; then
+    echo $0: usage: ./190hotfix keymap_name
+    exit 1
+fi
+
+echo Saving backup as ./keymaps/$1/keymap.c.bak ...
+mv ./keymaps/$1/keymap.c ./keymaps/$1/keymap.c.bak
+
+echo Modifying ./keymaps/$1/keymap.c ...
+cat ./keymaps/$1/keymap.c.bak | sed -r 's/^void \* matrix_/void matrix_/'>./keymaps/$1/keymap.c
+
+echo Complete!

keyboard/ergodox_ez/ergodox_ez.c

@@ -5,16 +5,16 @@ bool i2c_initialized = 0;
 uint8_t mcp23018_status = 0x20;
 
 __attribute__ ((weak))
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
-    return NULL;
+
-};
+}
 
 __attribute__ ((weak))
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
-    return NULL;
+
-};
+}
 
-void * matrix_init_kb(void) {
+void matrix_init_kb(void) {
    // keyboard LEDs (see "PWM on ports OC1(A|B|C)" in "teensy-2-0.md")
     TCCR1A = 0b10101001;  // set and configure fast PWM
     TCCR1B = 0b00001001;  // set and configure fast PWM
@@ -34,22 +34,13 @@ void * matrix_init_kb(void) {
 
     ergodox_blink_all_leds();
 
-    if (matrix_init_user) {
+    matrix_init_user();
-        (*matrix_init_user)();
 }
 
-    return NULL;
+void matrix_scan_kb(void) {
-};
+    matrix_scan_user();
-
-void * matrix_scan_kb(void) {
-
-    if (matrix_scan_user) {
-        (*matrix_scan_user)();
 }
 
-    return NULL;
-};
-
 
 void ergodox_blink_all_leds(void)
 {

keyboard/ergodox_ez/ergodox_ez.h

@@ -123,8 +123,8 @@ inline void ergodox_led_all_set(uint8_t n)
     { k0D, k1D, k2D, k3D, k4D, KC_NO }    \
    }
 
-void * matrix_init_user(void);
+void matrix_init_user(void);
-void * matrix_scan_user(void);
+void matrix_scan_user(void);
 
 
 

keyboard/ergodox_ez/keymaps/andrew_osx/keymap.c

@@ -158,12 +158,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
     uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/keymaps/coderkun_neo2/keymap.c

@@ -243,12 +243,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 };
 
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void)
+void matrix_scan_user(void)
 {
     uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/keymaps/colemak/keymap.c

@@ -155,12 +155,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
     uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/keymaps/csharp_dev/keymap.c

@@ -210,12 +210,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
     uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/keymaps/dave/keymap.c

@@ -154,12 +154,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
-    return NULL;
+
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
     /* leds is a static array holding the current brightness of each of the
      * three keyboard LEDs. It's 4 long simply to avoid the ugliness of +1s and
      * -1s in the code below, and because wasting a byte really doesn't matter
@@ -191,5 +191,5 @@ void * matrix_scan_user(void) {
         }
     }
 
-    return NULL;
+
 };

keyboard/ergodox_ez/keymaps/default/keymap.c

@@ -155,12 +155,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
     uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/keymaps/default_osx/keymap.c

@@ -158,12 +158,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
     uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/keymaps/dragon788/keymap.c

@@ -200,12 +200,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
     uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/keymaps/dvorak/keymap.c

@@ -155,12 +155,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
     uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/keymaps/emacs_osx_dk/keymap.c

@@ -155,12 +155,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
     uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/keymaps/erez_experimental/keymap.c

@@ -156,12 +156,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
     uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/keymaps/german-kinergo/keymap.c

@@ -182,12 +182,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
     uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/keymaps/german/keymap.c

@@ -157,12 +157,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
     uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/keymaps/j3rn/keymap.c

@@ -157,12 +157,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
     uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/keymaps/jack/keymap.c

@@ -89,12 +89,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
     uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/keymaps/jacobono/keymap.c

@@ -244,12 +244,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
 	uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/keymaps/jgarr/keymap.c

@@ -155,12 +155,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
     uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/keymaps/kastyle/keymap.c

@@ -155,12 +155,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
     uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/keymaps/kines-ish/keymap.c

@@ -155,12 +155,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
     uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/keymaps/mpiechotka/keymap.c

@@ -248,12 +248,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 }
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
-    return NULL;
+
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
     uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/keymaps/ordinary/keymap.c

@@ -161,12 +161,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
     uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/keymaps/osx_de/keymap.c

@@ -390,12 +390,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
     uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/keymaps/osx_de_adnw_koy/keymap.c

@@ -227,12 +227,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
     uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/keymaps/osx_fr/keymap.c

@@ -158,12 +158,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
     uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/keymaps/osx_kinesis_pnut/keymap.c

@@ -162,12 +162,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
     uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/keymaps/plover/keymap.c

@@ -199,12 +199,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
     uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/keymaps/romanzolotarev-norman-plover-osx/keymap.c

@@ -108,11 +108,11 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
   uint8_t layer = biton32(layer_state);
   ergodox_board_led_off();
   ergodox_right_led_1_off();

keyboard/ergodox_ez/keymaps/software_neo2/keymap.c

@@ -114,12 +114,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
     uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/keymaps/tm2030/keymap.c

@@ -215,12 +215,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
-    return NULL;
+
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
     ergodox_board_led_off();
     ergodox_right_led_1_off();
@@ -238,5 +238,5 @@ void * matrix_scan_user(void) {
     if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) {
       ergodox_right_led_3_on();
     }
-    return NULL;
+
 };

keyboard/ergodox_ez/keymaps/tonyabra_osx/keymap.c

@@ -155,12 +155,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
     uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/keymaps/workman_osx_mdw/keymap.c

@@ -337,12 +337,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 };
 
 // Runs just one time when the keyboard initializes.
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
 };
 
 // Runs constantly in the background, in a loop.
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
     uint8_t layer = biton32(layer_state);
 

keyboard/ergodox_ez/makeallhex.sh

@@ -0,0 +1,9 @@
+#!/bin/bash
+#a quick tool to rebuild all the hex files for the keymaps in the ./keymaps/ directory
+make clean
+for f in ./keymaps/*
+	do 
+		MAPNAME=$(echo "$f"|sed -r 's#^./keymaps/##')
+		make KEYMAP=$MAPNAME
+		mv ergodox_ez.hex "$f/$MAPNAME.hex"
+done

keyboard/ergodox_ez/matrix.c

@@ -62,12 +62,12 @@ uint32_t matrix_scan_count;
 
 
 __attribute__ ((weak))
-void * matrix_init_kb(void) {
+void matrix_init_kb(void) {
-};
+}
 
 __attribute__ ((weak))
-void * matrix_scan_kb(void) {
+void matrix_scan_kb(void) {
-};
+}
 
 inline
 uint8_t matrix_rows(void)
@@ -102,9 +102,7 @@ void matrix_init(void)
     matrix_scan_count = 0;
 #endif
 
-    if (matrix_init_kb) {
+    matrix_init_kb();
-        (*matrix_init_kb)();
-    }
 
 }
 
@@ -163,9 +161,7 @@ uint8_t matrix_scan(void)
     }
 
 
-    if (matrix_scan_kb) {
+    matrix_scan_kb();
-        (*matrix_scan_kb)();
-    }
 
     return 1;
 }

keyboard/hhkb_qmk/hhkb_qmk.c

@@ -1,16 +1,16 @@
 #include "hhkb_qmk.h"
 
 __attribute__ ((weak))
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 	// leave these blank
 };
 
 __attribute__ ((weak))
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 	// leave these blank
 };
 
-void * matrix_init_kb(void) {
+void matrix_init_kb(void) {
 	// put your keyboard start-up code here
 	// runs once when the firmware starts up
 
@@ -19,7 +19,7 @@ void * matrix_init_kb(void) {
 	}
 };
 
-void * matrix_scan_kb(void) {
+void matrix_scan_kb(void) {
 	// put your looping keyboard code here
 	// runs every cycle (a lot)
 

keyboard/hhkb_qmk/hhkb_qmk.h

@@ -24,7 +24,7 @@
     { K70, K71, K72, K73, K74, K75, K76, KC_NO }                               \
 }
 
-void * matrix_init_user(void);
+void matrix_init_user(void);
-void * matrix_scan_user(void);
+void matrix_scan_user(void);
 
 #endif

keyboard/jd45/jd45.c

@@ -1,16 +1,16 @@
 #include "jd45.h"
 
 __attribute__ ((weak))
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
 };
 
 __attribute__ ((weak))
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
 };
 
-void * matrix_init_kb(void) {
+void matrix_init_kb(void) {
 	#ifdef BACKLIGHT_ENABLE
     	backlight_init_ports();
 	#endif
@@ -20,7 +20,7 @@ void * matrix_init_kb(void) {
 	}
 };
 
-void * matrix_scan_kb(void) {
+void matrix_scan_kb(void) {
 	if (matrix_scan_user) {
 		(*matrix_scan_user)();
 	}

keyboard/jd45/jd45.h

@@ -6,7 +6,7 @@
 #include "backlight.h"
 #include <stddef.h>
 
-void * matrix_init_user(void);
+void matrix_init_user(void);
-void * matrix_scan_user(void);
+void matrix_scan_user(void);
 
 #endif

keyboard/planck/keymaps/default/keymap.c

@@ -17,31 +17,91 @@
 #define _RS 4
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[_QW] = { /* Qwerty */
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Raise |    Space    |Lower | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QW] = {
   {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC},
   {KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
   {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
   {M(0),    KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), KC_SPC,  KC_SPC,  MO(_RS), KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
 },
-[_CM] = { /* Colemak */
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Raise |    Space    |Lower | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_CM] = {
   {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC},
   {KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT},
   {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
   {M(0),    KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), KC_SPC,  KC_SPC,  MO(_RS), KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
 },
-[_DV] = { /* Dvorak */
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Raise |    Space    |Lower | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DV] = {
   {KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC},
   {KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH},
   {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT },
   {M(0),    KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), KC_SPC,  KC_SPC,  MO(_RS), KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
 },
-[_RS] = { /* RAISE */
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |Qwerty|Colemk|Dvorak| Reset|Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Raise |    Space    |Lower | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RS] = {
   {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC},
   {KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS},
   {KC_TRNS, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  DF(_QW), DF(_CM), DF(_DV), RESET,   KC_TRNS},
   {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
 },
-[_LW] = { /* LOWER */
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |Qwerty|Colemk|Dvorak| Reset|Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Raise |    Space    |Lower | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LW] = {
   {KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC},
   {KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
   {KC_TRNS, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  DF(_QW), DF(_CM), DF(_DV), RESET,   KC_TRNS},

keyboard/planck/keymaps/lock/keymap.c

@@ -150,7 +150,7 @@ float start_up[][2] = {
   {440.0*pow(2.0,(64)/12.0), 1000},
 };
 
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
     init_notes();
     play_notes(&start_up, 9, false);
 }

keyboard/planck/planck.c

@@ -1,16 +1,16 @@
 #include "planck.h"
 
 __attribute__ ((weak))
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
 
-};
+}
 
 __attribute__ ((weak))
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
 
-};
+}
 
-void * matrix_init_kb(void) {
+void matrix_init_kb(void) {
 	#ifdef BACKLIGHT_ENABLE
     	backlight_init_ports();
 	#endif
@@ -24,13 +24,9 @@ void * matrix_init_kb(void) {
     DDRE |= (1<<6);
     PORTE |= (1<<6);
 
-	if (matrix_init_user) {
+	matrix_init_user();
-		(*matrix_init_user)();
 }
-};
 
-void * matrix_scan_kb(void) {
+void matrix_scan_kb(void) {
-	if (matrix_scan_user) {
+	matrix_scan_user();
-		(*matrix_scan_user)();
 }
-};

keyboard/planck/planck.h

@@ -40,7 +40,7 @@
 	{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \
 }
 
-void * matrix_init_user(void);
+void matrix_init_user(void);
-void * matrix_scan_user(void);
+void matrix_scan_user(void);
 
 #endif

keyboard/retro_refit/Makefile

@@ -0,0 +1,139 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = retro_refit
+
+
+# Directory common source filess exist
+TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# # project specific files
+SRC = retro_refit.c
+
+ifdef KEYMAP
+    SRC := keymaps/$(KEYMAP).c $(SRC)
+else
+    SRC := keymaps/default.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+# NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+# MIDI_ENABLE = YES 		# MIDI controls
+# UNICODE_ENABLE = YES 		# Unicode
+# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
+
+
+# Optimize size but this may cause error "relocation truncated to fit"
+#EXTRALDFLAGS = -Wl,--relax
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
+
+include $(TOP_DIR)/quantum/quantum.mk
+

keyboard/retro_refit/README.md

@@ -0,0 +1,24 @@
+retro_refit keyboard firmware
+======================
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent README.md](/README.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboard/retro_refit folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+To build with the default keymap, simply run `make`.
+
+### Other Keymaps
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top README.md) and existent keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
+```
+$ make KEYMAP=[default|jack|<name>]
+```
+Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.

keyboard/retro_refit/config.h

@@ -0,0 +1,79 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Nobody
+#define PRODUCT         retro_refit
+#define DESCRIPTION     Retro Refit
+
+/* key matrix size */
+#define MATRIX_ROWS 11
+#define MATRIX_COLS 8
+
+// See note in retro_refit.h for an explanation of how this matrix is wired up
+#define COLS (int []){ B0, B1, B2, B3, D2, D3, C7, D5 }
+#define ROWS (int []){ D4, D7, B4, B5, B6, F7, F6, F5, F4, F1, F0 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 0
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif

keyboard/retro_refit/keymaps/default.c

@@ -0,0 +1,33 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "retro_refit.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] =
+	KEYMAP( ESC,    F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,  F9,  F10, NLCK, SLCK, PSCR, PAUS, \
+			GRV,     1,    2,    3,    4,    5,    6,    7,    8,   9,    0, MINS,  EQL, BSPC, HOME, \
+			TAB,     Q,    W,    E,    R,    T,    Y,    U,    I,   O,    P, LBRC, RBRC,       PGUP, \
+			BSLS,    A,    S,    D,    F,    G,    H,    J,    K,   L, SCLN, QUOT,        ENT, PGDN, \
+			LSFT,          Z,    X,    C,    V,    B,    N,    M, COMM, DOT, SLSH, RSFT,   UP,  END, \
+			LCTL, LGUI, LALT,        SPC,                               INS,  DEL, LEFT, DOWN, RGHT),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};

keyboard/retro_refit/retro_refit.c

@@ -0,0 +1,68 @@
+#include "retro_refit.h"
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+	// leave this function blank - it can be defined in a keymap file
+};
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+	// leave this function blank - it can be defined in a keymap file
+};
+
+__attribute__ ((weak))
+void led_set_user(uint8_t usb_led) {
+	// leave this function blank - it can be defined in a keymap file
+};
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	
+	// Disable status LED on KB, enable status LED on Teensy (KB_STATUS = !TEENSY_STATUS)
+	DDRD |= (1<<6);
+	PORTD |= (1<<6);
+	
+	matrix_init_user();
+};
+
+void amatrix_scan_kb(void) {
+    // put your looping keyboard code here
+    // runs every cycle (a lot)
+
+	matrix_scan_user();
+};
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // output low
+        DDRD |= (1<<0);
+        PORTD &= ~(1<<0);
+    } else {
+        // Hi-Z
+        DDRD &= ~(1<<0);
+        PORTD &= ~(1<<0);
+    }
+    if (usb_led & (1<<USB_LED_NUM_LOCK)) {
+        // output low
+        DDRD |= (1<<1);
+        PORTD &= ~(1<<1);
+    } else {
+        // Hi-Z
+        DDRD &= ~(1<<1);
+        PORTD &= ~(1<<1);
+    }
+    if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
+        // output low
+        DDRC |= (1<<6);
+        PORTC &= ~(1<<6);
+    } else {
+        // Hi-Z
+        DDRC &= ~(1<<6);
+        PORTC &= ~(1<<6);
+    }	
+	
+	led_set_user(usb_led);
+};

keyboard/retro_refit/retro_refit.h

@@ -0,0 +1,45 @@
+#ifndef RETRO_REFIT_H
+#define RETRO_REFIT_H
+
+#include "matrix.h"
+#include "keymap_common.h"
+#include "led.h"
+#include <stddef.h>
+
+// This macro is an example of using a non-standard row-column matrix. The 
+// keyboard in question had 11 rows and 8 columns, but the rows were not all 
+// horizontal, and the columns were not all vertical. For example, row 2 
+// contained "Print Screen", "N", "M", ",", ".", "/", "Right Shift", and
+// "Left Alt". Column 0 contained "F6", "7", "O", "'", "Q", "D", "B", 
+// "Left Alt", "Up Arrow", and "Down Arrow".
+//
+// The macro makes programming the keys easier and in a more straight-forward
+// manner because it realigns the keys into a 6x15 sensible keyboard layout 
+// instead of the obtuse 11x8 matrix.
+
+#define KEYMAP( \
+	K77, K05, K04, K03, K02, K01, K00, KA7, KA6, KA5, KA4, KA3, KA2, K11, K94, \
+	K27, K76, K75, K74, K73, K72, K71, K70, K67, K66, K65, K64, K63, K62, KA1, \
+	K61, K60, K57, K56, K55, K54, K53, K52, K51, K50, K47, K46, K45,      K97, \
+	K43, K42, K41, K40, K37, K36, K35, K34, K33, K32, K31, K30,      K44, K87, \
+	K26,      K24, K23, K22, K21, K20, K17, K16, K15, K14, K13, K12, KA0, K91, \
+	K10, K06, K25,                K07,                K86, K85, K95, K90, K93  \
+) { \
+{	KC_##K00,	KC_##K01,	KC_##K02,	KC_##K03,	KC_##K04,	KC_##K05,	KC_##K06,	KC_##K07,	}, \
+{	KC_##K10,	KC_##K11,	KC_##K12,	KC_##K13,	KC_##K14,	KC_##K15,	KC_##K16,	KC_##K17,	}, \
+{	KC_##K20,	KC_##K21,	KC_##K22,	KC_##K23,	KC_##K24,	KC_##K25,	KC_##K26,	KC_##K27,	}, \
+{	KC_##K30,	KC_##K31,	KC_##K32,	KC_##K33,	KC_##K34,	KC_##K35,	KC_##K36,	KC_##K37,	}, \
+{	KC_##K40,	KC_##K41,	KC_##K42,	KC_##K43,	KC_##K44,	KC_##K45,	KC_##K46,	KC_##K47,	}, \
+{	KC_##K50,	KC_##K51,	KC_##K52,	KC_##K53,	KC_##K54,	KC_##K55,	KC_##K56,	KC_##K57,	}, \
+{	KC_##K60,	KC_##K61,	KC_##K62,	KC_##K63,	KC_##K64,	KC_##K65,	KC_##K66,	KC_##K67,	}, \
+{	KC_##K70,	KC_##K71,	KC_##K72,	KC_##K73,	KC_##K74,	KC_##K75,	KC_##K76,	KC_##K77,	}, \
+{	KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_##K85,	KC_##K86,	KC_##K87,	}, \
+{	KC_##K90,	KC_##K91,	KC_NO,		KC_##K93,	KC_##K94,	KC_##K95,	KC_NO,		KC_##K97,	}, \
+{	KC_##KA0,	KC_##KA1,	KC_##KA2,	KC_##KA3,	KC_##KA4,	KC_##KA5,	KC_##KA6,	KC_##KA7,	} \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+void led_set_user(uint8_t usb_led);
+
+#endif

quantum/led.c

@@ -19,9 +19,16 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "stdint.h"
 #include "led.h"
 
+__attribute__ ((weak))
+void led_set_kb(uint8_t usb_led) {
+
+}
 
 void led_set(uint8_t usb_led)
 {
+
+	// Example LED Code
+	//
     // // Using PE6 Caps Lock LED
     // if (usb_led & (1<<USB_LED_CAPS_LOCK))
     // {
@@ -35,4 +42,6 @@ void led_set(uint8_t usb_led)
     //     DDRE &= ~(1<<6);
     //     PORTE &= ~(1<<6);
     // }
+
+	led_set_kb(usb_led);
 }

quantum/matrix.c

@@ -48,14 +48,14 @@ static void unselect_rows(void);
 static void select_row(uint8_t row);
 
 __attribute__ ((weak))
-void * matrix_init_kb(void) {
+void matrix_init_kb(void) {
 
-};
+}
 
 __attribute__ ((weak))
-void * matrix_scan_kb(void) {
+void matrix_scan_kb(void) {
 
-};
+}
 
 inline
 uint8_t matrix_rows(void)
@@ -86,9 +86,7 @@ void matrix_init(void)
         matrix_debouncing[i] = 0;
     }
 
-    if (matrix_init_kb) {
+    matrix_init_kb();
-        (*matrix_init_kb)();
-    }
 }
 
 
@@ -152,9 +150,7 @@ uint8_t matrix_scan(void)
     }
 #endif
 
-    if (matrix_scan_kb) {
+    matrix_scan_kb();
-        (*matrix_scan_kb)();
-    }
 
     return 1;
 }

quantum/template/template.c

@@ -1,29 +1,36 @@
 #include "%KEYBOARD%.h"
 
 __attribute__ ((weak))
-void * matrix_init_user(void) {
+void matrix_init_user(void) {
-	// leave these blank
+	// leave this function blank - it can be defined in a keymap file
 };
 
 __attribute__ ((weak))
-void * matrix_scan_user(void) {
+void matrix_scan_user(void) {
-	// leave these blank
+	// leave this function blank - it can be defined in a keymap file
-};
+}
+
+__attribute__ ((weak))
+void led_set_user(uint8_t usb_led) {
+	// leave this function blank - it can be defined in a keymap file
+}
 
-void * matrix_init_kb(void) {
+void matrix_init_kb(void) {
 	// put your keyboard start-up code here
 	// runs once when the firmware starts up
 	
-	if (matrix_init_user) {
+	matrix_init_user();
-		(*matrix_init_user)();
 }
-};
 
-void * matrix_scan_kb(void) {
+void matrix_scan_kb(void) {
     // put your looping keyboard code here
     // runs every cycle (a lot)
 
-	if (matrix_scan_user) {
+	matrix_scan_user();
-		(*matrix_scan_user)();
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
 }
-};

quantum/template/template.h

@@ -19,7 +19,8 @@
     { k10, KC_NO, k11 }, \
 } 
 
-void * matrix_init_user(void);
+void matrix_init_user(void);
-void * matrix_scan_user(void);
+void matrix_scan_user(void);
+void led_set_user(uint8_t usb_led);
 
 #endif

teensy-sdk

@@ -1 +0,0 @@
-Subproject commit 19892c196894e6676fa69c732e05a03a68d5cb07

tmk_core/common/led.h

@@ -34,6 +34,9 @@ extern "C" {
 
 void led_set(uint8_t usb_led);
 
+/* keyboard-specific LED functionality */
+void led_set_kb(uint8_t usb_led);
+
 #ifdef __cplusplus
 }
 #endif

tmk_core/common/matrix.h

@@ -64,8 +64,8 @@ void matrix_power_up(void);
 void matrix_power_down(void);
 
 /* keyboard-specific setup/loop functionality */
-void * matrix_init_kb(void);
+void matrix_init_kb(void);
-void * matrix_scan_kb(void);
+void matrix_scan_kb(void);
 
 #ifdef __cplusplus
 }