Merge branch 'master' of https://github.com/jackhumbert/qmk_firmware

keyboards/atreus/Makefile

@@ -2,11 +2,11 @@
 
 ifdef TEENSY2
     OPT_DEFS += -DATREUS_TEENSY2
-    ATRUES_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
+    ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
 else
     OPT_DEFS += -DATREUS_ASTAR
     OPT_DEFS += -DCATERINA_BOOTLOADER
-    ATRUES_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
+    ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
                             avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
 endif
 
@@ -84,5 +84,5 @@ endif
 USB ?= /dev/cu.usbmodem1411
 
 upload: build
-	$(ATRUES_UPLOAD_COMMAND)
+	$(ATREUS_UPLOAD_COMMAND)
-	
+	

keyboards/atreus/keymaps/xyverz/keymap.c

@@ -46,14 +46,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_L1] = { /* LAYER 1 */
     {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_NO,   KC_6,    KC_7,    KC_8,    KC_9,    KC_0   },
     {KC_TAB,  KC_INS,  KC_UP,   KC_DEL,  KC_HOME, KC_NO,   KC_PGUP, KC_MUTE, KC_VOLD, KC_VOLU, KC_EQL },
-    {KC_CAPS, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  KC_LCTL, KC_PGDN, KC_MPRV, KC_MPLY, KC_MNXT, KC_BSLS},
+    {KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  KC_LCTL, KC_PGDN, KC_MPRV, KC_MPLY, KC_MNXT, KC_BSLS},
     {KC_TRNS, KC_GRV,  KC_LGUI, KC_TRNS, KC_DEL,  KC_LALT, KC_SPC,  KC_TRNS, KC_LBRC, KC_RBRC, KC_ENT }
   },
   [_L2] = { /* LAYER 2 */
     {KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_NO,   KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN},
-    {KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_NO,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10 },
+    {KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_NO,   KC_TRNS, KC_F6,   KC_F7,   KC_F8,   KC_PLUS},
-    {KC_TRNS, KC_TRNS, DVORAK,  QWERTY,  COLEMAK, KC_LCTL, KC_TRNS, KC_TRNS, KC_TRNS, KC_F11,  KC_F12 },
+    {KC_TRNS, KC_TRNS, DVORAK,  QWERTY,  COLEMAK, KC_LCTL, KC_TRNS, KC_F9,   KC_F10,  KC_F11,  KC_F12 },
-    {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC,  KC_TRNS, KC_TRNS, KC_TRNS, RESET  }
+    {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC,  KC_TRNS, LSFT(KC_LBRC), LSFT(KC_RBRC), RESET}
   }
 };
 

keyboards/ergodox/keymaps/algernon/Makefile

@@ -8,10 +8,17 @@ CONSOLE_ENABLE = no
 TAP_DANCE_ENABLE = yes
 KEYLOGGER_ENABLE ?= yes
 
+ADORE_AUTOLOG ?= no
+
 ifeq (${FORCE_NKRO},yes)
 OPT_DEFS += -DFORCE_NKRO
 endif
 
+ifeq (${ADORE_AUTOLOG},yes)
+KEYLOGGER_ENABLE = yes
+OPT_DEFS += -DADORE_AUTOLOG
+endif
+
 ifeq (${KEYLOGGER_ENABLE},yes)
 OPT_DEFS += -DKEYLOGGER_ENABLE
 CONSOLE_ENABLE = yes

keyboards/ergodox/keymaps/algernon/readme.md

@@ -16,11 +16,12 @@ Some of the things in the layout only work when one uses Spacemacs and GNOME und
     - [ADORE layer](#adore-layer)
     - [Hungarian layer](#hungarian-layer)
     - [Navigation and media layer](#navigation-and-media-layer)
-    - [One-handed layer](#one-handed-layer)
     - [Steno layer](#steno-layer)
     - [LED states](#led-states)
 * [Tools](#tools)
     - [Heatmap](#heatmap)
+* [Special features](#special-features)
+    - [Unicode Symbol Input](#unicode-symbol-input)
 * [Building](#building)
     - [Using on Windows](#using-on-windows)
 * [Changelog](#changelog)
@@ -38,7 +39,7 @@ At its core, this is a Dvorak layout, with some minor changes. The more interest
 * The `Shift`, `Alt`, and `Control` modifiers are one-shot. When tapped, they are considered active for the next key press only. When double tapped, they toggle on, until a third, single tap sometime later. When held, they act as expected. My usual pattern is that I use these for the next keypress only, so this behaviour is perfect. If I need them held, I'll just double-tap.
 * The `GUI` key is special, because when I double-tap it, it sends `GUI + w`, which pops up an application selector. It also switches to a one-shot layer, where the number row on the left half turns into app selector macros, for the most common things I usually want to switch to. Otherwise it behaves as on a normal layout.
 * The `ESC` key also doubles as a one-shot cancel key: if tapped while any of the one-shot modifiers are in-flight (as in, single-tapped, and not expired yet), it cancels all one-shot modifiers. It also cancels the **Hun** layer, if active. Otherwise it sends the usual keycode.
-* The **Media** and **Hun** layer keys are one-shot, the **1Hand** and **STENO** keys are toggles.
+* The **Media** and **Hun** layer keys are one-shot, the **STENO** key is a toggle.
 * When holding any of the **Arrow** layer keys, the arrow layer activates while the layer key is held. Tapping the key produces the normal key.
 * Tapping the `:` key once yields `:`, tapping it twice yields `;`.
 * The **Lead** key allows me to type in a sequence of keys, and trigger some actions:
@@ -51,6 +52,7 @@ At its core, this is a Dvorak layout, with some minor changes. The more interest
     - `LEAD v` prints the firmware version, the keyboard and the keymap.
     - `LEAD d` toggles logging keypress positions to the HID console.
     - `LEAD t` toggles time travel. Figuring out the current `date` is left as an exercise to the reader.
+    - `LEAD LEAD u` enters the [Unicode symbol input][#unicode-symbol-input] mode.
 
 ## ADORE layer
 
@@ -74,20 +76,6 @@ On this layer, the accented characters are at the same position as their base va
 
 This layer is primarily for navigating with the cursor or the mouse, and some media things.
 
-## One-handed layer
-
-[![One-handed layer](images/one-handed-layer.png)](http://www.keyboard-layout-editor.com/#/gists/edff2495135955b8963198dace7f7ece)
-
-The one-handed layer is used in situations where the right hand is occupied, by mousing around, for example. Tapping the `OTHER` key switches which side is active. For the most part, keys remain in their usual position. When the right half is active, keys are mirrored to the left half.
-
-The differences are as follows:
-
-* The `ESC` key has been moved to the bottom row, so the `OTHER` key is easier to tap.
-* Most keys on the thumb cluster now have dual uses, and these do not change when switching sides:
-    - The `Space`/`Backspace` key sends `Space` on tap, `Backspace` when held for longer than a normal tap.
-    - The `Enter`/`Shift` key sends `Enter` on short-tap, `Shift` on long-tap.
-* The `Apps`/`BASE` key can be used to go back to the base layer, by long-tapping it. A short-tap will send the `App` key, as usual.
-
 ## Steno layer
 
 [![Steno layer for Plover](images/steno-layer.png)](http://www.keyboard-layout-editor.com/#/gists/401ef9a84369e47c57f9aedcf0a0d667)
@@ -103,11 +91,25 @@ For the layers, the following rules apply:
 * When the [ADORE layer](#adore-layer) is toggled on, LEDs will light up from left to right in a sequence, then turn off. When the layer is toggled off, the LEDs light up and turn off in the other direction. No LEDs are on while the layer is active.
 * When the [Hungarian layer](#hungarian-layer) is active, the *green* and *blue* LEDs are on.
 * When the [Navigation and media layer](#navigation-and-media-layer) is active, the *red* and *green* ones are on.
-* When the [One-handed layer](#one-handed-layer) is active, the *green* LED is on and bright, and either the *red* or the *blue* one is going to slowly blink, depending on the currently active side.
 * For the [Steno layer](#steno-layer), all LEDs will be turned on.
 
 Unless noted otherwise, the layers use a dim light for the LEDs, while modifiers use a stronger one, and modifiers override any layer preferences. For example, when on the one-handed layer, with the left side active (*red* light blinking), if `Shift` is on, the *red* light will be constantly on.
 
+# Special features
+
+## Unicode Symbol Input
+
+Once in the Unicode Symbol Input mode, one is able to type in symbol names, press `Enter` or `Space`, and get the Unicode symbol itself back. When in the mode, a capital `U` is printed first. Once the sequence is finished, all of it is erased by sending enough `Backspace` taps, and the firmware starts the OS-specific unicode input sequence. Then, it looks up the symbol name, and enters the associated code. If it is not found, it will just replay the pressed keycodes.
+
+The currently supported symbols are:
+
+- `snowman`: ☃
+- `kiss`: 😙
+- `rofl`: 🤣
+- `poop`: 💩
+
+This is an experimental feature, and may or may not work reliably.
+
 # Tools
 
 ## Heatmap
@@ -133,14 +135,14 @@ To make my workflow easier, this layout is maintained in [its own repository][al
 $ git clone https://github.com/jackhumbert/qmk_firmware.git
 $ cd qmk_firmware
 $ git clone https://github.com/algernon/ergodox-layout.git \
-            keyboards/ergodox_ez/keymaps/algernon-master
+            keyboards/ergodox/keymaps/algernon-master
-$ make KEYBOARD=ergodox_ez KEYMAP=algernon-master
+$ make keyboard=ergodox keymap=algernon-master
 ```
 
 From time to time, updates may be submitted back to the QMK repository. If you are reading it there, you can build the firmware like any other firmware included with it (assuming you are in the root directory of the firmware):
 
 ```
-$ make KEYBOARD=ergodox_ez KEYMAP=algernon
+$ make keyboard=ergodox keymap=algernon
 ```
 
 ## Using on Windows
@@ -149,6 +151,16 @@ The keymap default to forcing NKRO, which seems to upset Windows, and except the
 
 # Changelog
 
+## v1.5 - 2016-08-12
+
+* The **1HAND** layer has been removed.
+* A `Delete` key is now available on the right thumb cluster.
+* The [ADORE](#adore-layer) layer received a major update, see the layout image above.
+* It is now possible to enable automatic logging for the [ADORE](#adore-layer) layer, by setting the `ADORE_AUTOLOG` makefile variable to `yes` when compiling the keymap. It is off by default.
+* The `~` key and the `Media Next/Prev` key have been swapped on the [base layer](#base-layer).
+* On the **ARROW** layer, `Backspace` has been replaced by `Enter`.
+* There is some experimental support for entering Unicode symbols.
+
 ## v1.4 - 2016-07-29
 
 * When toggling the key logging on or off, the LEDs will do a little dance.

keyboards/ergodox/keymaps/xyverz/keymap.c

@@ -0,0 +1,311 @@
+/*
+ * The Dvorak layout shown herestems from my early Kinesis years, using the Contour PS/2 with a Dvorak
+ * software layout. Because of this, the RBRC and LBRC were on opposite sides of the board in the corner
+ * keys. I've decided to continue using this layout with my ErgoDox.
+ *
+ * The QWERTY layout shown here is based entirely on the Kinesis Advantage layout, with the additional
+ * keys as shown in the diagrams. The Colemak layout is merely an adaptation of that.
+ *
+ * I've enabled persistent keymaps for Qwerty, Dvorak and Colemak layers, similar to the default Planck
+ * layouts.
+ * 
+ * For a better explanation of the layout matrices shown below, take a look at ../../ez/ez.h where the
+ * keymap is defined, beginning on line 81.
+ *
+ */
+
+#include "ergodox.h"
+#include "debug.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+#define _DV 0 // Dvorak layer
+#define _QW 1 // Qwerty layer
+#define _CM 2 // Colemak layer
+#define _MD 3 // Media Layer
+#define _KP 4 // Keypad Layer
+
+// Macro name shortcuts
+#define DVORAK M(_DV)
+#define QWERTY M(_QW)
+#define COLEMAK M(_CM)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap 0: Dvorak layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |   ]    |   1  |   2  |   3  |   4  |   5  | ESC  |           | ESC  |   6  |   7  |   8  |   9  |   0  |   [    |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Tab    |   '  |   ,  |   .  |   Y  |   Y  |      |           |      |   F  |   G  |   C  |   R  |   L  |   \    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | CapsLk |   A  |   O  |   E  |   U  |   I  |------|           |------|   D  |   H  |   T  |   N  |   S  |   -    |
+ * |--------+------+------+------+------+------| _MD  |           | _KP  |------+------+------+------+------+--------|
+ * | LShift |   Z  |   X  |   C  |   V  |   X  |      |           |      |   B  |   M  |   W  |   V  |   Z  | RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   | LGUI |   `  |  INS | Left | Rght |                                       |  Up  |  Dn  |   /  |   =  | RGUI |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | LCtr | LAlt |       | Ralt | RCtr |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      | Home |       | PgUp |      |      |
+ *                                 | BkSp | Del  |------|       |------| Enter| Space|
+ *                                 |      |      | End  |       | PgDn |      |      |
+ *                                 `--------------------'       `--------------------'
+ *
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[_DV] = {  // layer 0 : Dvorak
+        // left hand
+	{KC_RBRC, KC_TAB,  KC_CAPS, KC_LSFT, KC_LGUI, KC_NO  },
+	{KC_1,    KC_QUOT, KC_A,    KC_SCLN, KC_GRV,  KC_END },
+	{KC_2,    KC_COMM, KC_O,    KC_Q,    KC_INS,  KC_DEL },
+	{KC_3,    KC_DOT,  KC_E,    KC_J,    KC_LEFT, KC_BSPC},
+	{KC_4,    KC_P,    KC_U,    KC_K,    KC_RGHT, KC_HOME},
+	{KC_5,    KC_Y,    KC_I,    KC_X,    KC_NO,   KC_LCTL},
+	{KC_ESC,  KC_NO,   KC_NO,   MO(_MD), KC_NO,   KC_LALT},
+
+	// right hand
+	{KC_ESC,  KC_NO,   KC_NO,   MO(_KP), KC_NO,   KC_RALT},
+	{KC_6,    KC_F,    KC_D,    KC_B,    KC_NO,   KC_RCTL},
+	{KC_7,    KC_G,    KC_H,    KC_M,    KC_UP,   KC_PGUP},
+	{KC_8,    KC_C,    KC_T,    KC_W,    KC_DOWN, KC_SPC },
+	{KC_9,    KC_R,    KC_N,    KC_V,    KC_SLSH, KC_ENT },
+	{KC_0,    KC_L,    KC_S,    KC_Z,    KC_EQL,  KC_PGDN},
+	{KC_LBRC, KC_BSLS, KC_MINS, KC_RSFT, KC_RGUI, KC_NO  }
+},
+
+/* Keymap 1: QWERTY layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |   =    |   1  |   2  |   3  |   4  |   5  | ESC  |           | ESC  |   6  |   7  |   8  |   9  |   0  |   -    |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Tab    |   Q  |   W  |   E  |   R  |   T  |      |           |      |   Y  |   U  |   I  |   O  |   P  |   \    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | CapsLk |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |   ;  |   '    |
+ * |--------+------+------+------+------+------| _MD  |           | _KP  |------+------+------+------+------+--------|
+ * | LShift |   Z  |   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |   /  | RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   | LGUI |   `  |  INS | Left | Rght |                                       |  Up  |  Dn  |   [  |   ]  | RGUI |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | LCtr | LAlt |       | Ralt | RCtr |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      | Home |       | PgUp |      |      |
+ *                                 | BkSp | Del  |------|       |------| Enter| Space|
+ *                                 |      |      | End  |       | PgDn |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[_QW] = {  // layer 1 : QWERTY
+        // left hand
+	{KC_EQL,  KC_TAB,  KC_CAPS, KC_LSFT, KC_LGUI, KC_NO  },
+	{KC_1,    KC_Q,    KC_A,    KC_Z,    KC_GRV,  KC_END },
+	{KC_2,    KC_W,    KC_S,    KC_X,    KC_INS,  KC_DEL },
+	{KC_3,    KC_E,    KC_D,    KC_C,    KC_LEFT, KC_BSPC},
+	{KC_4,    KC_R,    KC_F,    KC_V,    KC_RGHT, KC_HOME},
+	{KC_5,    KC_T,    KC_G,    KC_B,    KC_NO,   KC_LCTL},
+	{KC_ESC,  KC_NO,   KC_NO,   MO(_MD), KC_NO,   KC_LALT},
+
+	// right hand
+	{KC_ESC,  KC_NO,   KC_NO,   MO(_KP), KC_NO,   KC_RALT},
+	{KC_6,    KC_Y,    KC_H,    KC_N,    KC_NO,   KC_RCTL},
+	{KC_7,    KC_U,    KC_J,    KC_M,    KC_UP,   KC_PGUP},
+	{KC_8,    KC_I,    KC_K,    KC_COMM, KC_DOWN, KC_SPC },
+	{KC_9,    KC_O,    KC_L,    KC_DOT,  KC_LBRC, KC_ENT },
+	{KC_0,    KC_P,    KC_SCLN, KC_SLSH, KC_RBRC, KC_PGDN},
+	{KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, KC_NO  }
+  },
+
+/* Keymap 2: Colemak layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |   =    |   1  |   2  |   3  |   4  |   5  | ESC  |           | ESC  |   6  |   7  |   8  |   9  |   0  |   -    |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Tab    |   Q  |   W  |   F  |   P  |   G  |      |           |      |   J  |   L  |   U  |   Y  |   ;  |   \    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | BkSpc  |   A  |   R  |   S  |   T  |   D  |------|           |------|   H  |   N  |   E  |   I  |   O  |   '    |
+ * |--------+------+------+------+------+------| _MD  |           | _KP  |------+------+------+------+------+--------|
+ * | LShift |   Z  |   X  |   C  |   V  |   B  |      |           |      |   K  |   M  |   ,  |   .  |   /  | RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   | LGUI |   `  |  INS | Left | Rght |                                       |  Up  |  Dn  |   [  |   ]  | RGUI |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | LCtr | LAlt |       | Ralt | RCtr |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      | Home |       | PgUp |      |      |
+ *                                 | BkSp | Del  |------|       |------| Enter| Space|
+ *                                 |      |      | End  |       | PgDn |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[_CM] = {  // layer 2 : Colemak
+        // left hand
+	{KC_EQL,  KC_TAB,  KC_BSPC, KC_LSFT, KC_LGUI, KC_NO  },
+	{KC_1,    KC_Q,    KC_A,    KC_Z,    KC_GRV,  KC_END },
+	{KC_2,    KC_W,    KC_R,    KC_X,    KC_INS,  KC_DEL },
+	{KC_3,    KC_F,    KC_S,    KC_C,    KC_LEFT, KC_BSPC},
+	{KC_4,    KC_P,    KC_T,    KC_V,    KC_RGHT, KC_HOME},
+	{KC_5,    KC_G,    KC_D,    KC_B,    KC_NO,   KC_LCTL},
+	{KC_ESC,  KC_NO,   KC_NO,   MO(_MD), KC_NO,   KC_LALT},
+
+	// right hand
+	{KC_ESC,  KC_NO,   KC_NO,   MO(_KP), KC_NO,   KC_RALT},
+	{KC_6,    KC_J,    KC_H,    KC_K,    KC_NO,   KC_RCTL},
+	{KC_7,    KC_L,    KC_N,    KC_M,    KC_UP,   KC_PGUP},
+	{KC_8,    KC_U,    KC_E,    KC_COMM, KC_DOWN, KC_SPC },
+	{KC_9,    KC_Y,    KC_I,    KC_DOT,  KC_LBRC, KC_ENT },
+	{KC_0,    KC_SCLN, KC_O,    KC_SLSH, KC_RBRC, KC_PGDN},
+	{KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, KC_NO  }
+  },
+
+/* Keymap 3: Symbol Layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * | TEENSY |  F1  |  F2  |  F3  |  F4  |  F5  | F11  |           |  F12 |  F6  |  F7  |  F8  |  F9  |  F10 |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      | PrSc | ScLk | Paus |      | FN4  |           |  FN5 |      | Mute | Vol- | Vol+ |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |------|           |------| Stop | Prev | Play | Next | Sel  |        |
+ * |--------+------+------+------+------+------| FN4  |           |  FN5 |------+------+------+------+------+--------|
+ * |        |      |Dvorak|Qwerty|Colemk|      |      |           |      |      |      |      |      |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// Media Layer
+[_MD] = { // layer 3 : Media layer
+        // left hand
+	{RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO  },
+	{KC_F1,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+	{KC_F2,   KC_PSCR, KC_TRNS, DVORAK,  KC_TRNS, KC_TRNS},
+	{KC_F3,   KC_SLCK, KC_TRNS, QWERTY,  KC_TRNS, KC_TRNS},
+	{KC_F4,   KC_PAUS, KC_TRNS, COLEMAK, KC_TRNS, KC_TRNS},
+	{KC_F5,   KC_TRNS, KC_TRNS, KC_TRNS, KC_NO,   KC_TRNS},
+	{KC_F11,  KC_NO,   KC_NO,   KC_TRNS, KC_NO,   KC_TRNS},
+
+	// right hand
+	{KC_F12,  KC_NO,   KC_NO,   KC_TRNS, KC_NO,   KC_TRNS},
+	{KC_F6,   KC_TRNS, KC_MSTP, KC_TRNS, KC_NO,   KC_TRNS},
+	{KC_F7,   KC_MUTE, KC_MPRV, KC_TRNS, KC_TRNS, KC_TRNS},
+	{KC_F8,   KC_VOLD, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS},
+	{KC_F9,   KC_VOLU, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS},
+	{KC_F10,  KC_TRNS, KC_MSEL, KC_TRNS, KC_TRNS, KC_TRNS},
+	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO  }
+  },
+
+/* Keymap 4: Keypad layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * | Power  |      |      |      |      |      |      |           |      |      | NmLk | KP / | KP * | KP - |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Sleep  |      |      |      |      |      | FN5  |           |  FN4 |      | KP 7 | KP 8 | KP 9 | KP + |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | Wake   |      |      |      |      |      |------|           |------|      | KP 4 | KP 5 | KP 6 | KP + |        |
+ * |--------+------+------+------+------+------| FN5  |           |  FN4 |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      | KP 1 | KP 2 | KP 3 |KP Ent|        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       | KP 0 |      | KP . |KP Ent|      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// Keypad Layer
+[_KP] = { // layer 4 : Keypad layer
+        // left hand
+	{KC_PWR,  KC_SLEP, KC_WAKE, KC_TRNS, KC_TRNS, KC_NO  },
+	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO,   KC_TRNS},
+	{KC_TRNS, KC_NO,   KC_NO,   KC_TRNS, KC_NO,   KC_TRNS},
+
+	// right hand
+	{KC_TRNS, KC_NO,   KC_NO,   KC_TRNS, KC_NO,   KC_TRNS},
+	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO,   KC_TRNS},
+	{KC_NLCK, KC_P7,   KC_P4,   KC_P1,   KC_P0,   KC_TRNS},
+	{KC_PSLS, KC_P8,   KC_P5,   KC_P2,   KC_NO,   KC_TRNS},
+	{KC_PAST, KC_P9,   KC_P6,   KC_P3,   KC_PDOT, KC_TRNS},
+	{KC_PMNS, KC_PPLS, KC_PPLS, KC_PENT, KC_PENT, KC_TRNS},
+	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO,   KC_NO  }
+  },
+
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+      switch(id) {
+        case _DV:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_DV);
+          }
+          break;
+        case _QW:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_QW);
+          }
+          break;
+        case _CM:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_CM);
+          }
+          break;
+      }
+    return MACRO_NONE;
+};
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+
+};
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+
+    uint8_t layer = biton32(layer_state);
+
+    ergodox_board_led_off();
+    ergodox_right_led_1_off();
+    ergodox_right_led_2_off();
+    ergodox_right_led_3_off();
+    switch (layer) {
+      // TODO: Make this relevant to the ErgoDox EZ.
+        case 1:
+            ergodox_right_led_1_on();
+            break;
+        case 2:
+            ergodox_right_led_2_on();
+            break;
+        default:
+            // none
+            break;
+    }
+
+};

keyboards/handwired/minorca/Makefile

@@ -0,0 +1,71 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no         # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+NKRO_ENABLE ?= yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality
+MIDI_ENABLE ?= no            # MIDI controls
+AUDIO_ENABLE ?= no           # Audio output on port C6
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif

keyboards/handwired/minorca/config.h

@@ -0,0 +1,80 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6660
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    ME
+#define PRODUCT         MinOrca
+#define DESCRIPTION     Tiny Whale
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/* MinOrca PCB default pin-out */
+#define MATRIX_COL_PINS { D4, D6, D7, B4, B5, B6, F7, F6, F5, F4, F1, F0 }
+#define MATRIX_ROW_PINS { B0, B1, B2, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif

keyboards/handwired/minorca/keymaps/default/Makefile

@@ -0,0 +1,25 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../../Makefile
+endif

keyboards/handwired/minorca/keymaps/default/config.h

@@ -0,0 +1,12 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/* bootmagic salt key */
+#define BOOTMAGIC_KEY_SALT              KC_ESC
+
+/* skip bootmagic and eeconfig */
+#define BOOTMAGIC_KEY_SKIP              KC_SPACE
+
+#endif

keyboards/handwired/minorca/keymaps/default/keymap.c

@@ -0,0 +1,44 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "minorca.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = { /* Base */
+        {KC_ESC,  KC_Q,    KC_W,     KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC },
+        {KC_TAB,  KC_A,    KC_S,     KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    XXXXXXX, KC_ENT  },
+        {KC_LCTRL,XXXXXXX, KC_Z,     KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_QUOT, KC_FN1,  KC_FN0 },
+        {KC_NO,   XXXXXXX, KC_NO,    KC_LALT, KC_SPC,  XXXXXXX, XXXXXXX, KC_SPC,  XXXXXXX, KC_DOT,  KC_SLSH, KC_NO }
+    },
+    [1] = { /* First */
+        {KC_GRV,  KC_1,    KC_2,     KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DELT },
+        {KC_TAB,  KC_MPRV, KC_MPLY,  KC_MNXT, KC_PGUP, KC_HOME, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, XXXXXXX, KC_LGUI  },
+        {KC_LCTRL,XXXXXXX, KC_Z,     KC_X,    KC_C,    KC_PGDN, KC_END,  KC_L,    KC_SCLN, KC_UP,   KC_FN1,  KC_FN0 },
+        {KC_NO,   XXXXXXX, KC_NO,    KC_LALT, _______, XXXXXXX, XXXXXXX, _______, XXXXXXX, KC_DOWN, KC_RIGHT,KC_NO }
+    },
+    [2] = { /* Second */
+        {KC_ESC,  KC_EXLM, KC_AT,    KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DELT },
+        {KC_TAB,  KC_MUTE, KC_VOLD,  KC_VOLU, KC_TILD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, XXXXXXX, KC_ENT  },
+        {KC_CAPS, XXXXXXX, KC_LSFT,  KC_RSFT, KC_PAUSE,KC_F10,  KC_F11,  KC_F12,  KC_NO,   KC_UP,   KC_FN1,  KC_FN0 },
+        {KC_NO,   XXXXXXX, KC_NO,    KC_LALT, _______, XXXXXXX, XXXXXXX, _______, XXXXXXX, KC_DOWN, KC_RIGHT,KC_NO }
+    },
+}; 
+ 
+const uint16_t PROGMEM fn_actions[] = {
+	    [0] = ACTION_LAYER_MOMENTARY(1),  // to First overlay
+	    [1] = ACTION_LAYER_MOMENTARY(2),  // to Second overlay
+
+};

keyboards/handwired/minorca/keymaps/default/readme.md

@@ -0,0 +1,5 @@
+# The Default Minorca Layout
+
+Copied from https://github.com/pancinteractive/qmk_firmware/blob/master/keyboard/minorca_mkV/keymaps/default/keymap.c
+
+It looks incomplete.

keyboards/handwired/minorca/keymaps/readme.md

@@ -0,0 +1,23 @@
+# How to add your own keymap
+
+Folders can be named however you'd like (will be approved upon merging), or should follow the format with a preceding `_`:
+
+    _[ISO 3166-1 alpha-2 code*]_[layout variant]_[layout name/author]
+
+\* See full list: https://en.wikipedia.org/wiki/ISO_3166-1#Officially_assigned_code_elements
+
+and contain the following files:
+
+* `keymap.c`
+* `readme.md` *recommended*
+* `config.h` *optional*, found automatically when compiling
+* `Makefile` *optional*, found automatically when compling
+
+When adding your keymap to this list, keep it organised alphabetically (select list, edit->sort lines), and use this format:
+
+     * **folder_name** description
+
+# List of Minorca keymaps
+
+* **default** default Minorca layout
+* **rgb** layout with WS2812b control

keyboards/handwired/minorca/keymaps/rgb/Makefile

@@ -0,0 +1,25 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../../Makefile
+endif

keyboards/handwired/minorca/keymaps/rgb/config.h

@@ -0,0 +1,20 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/* bootmagic salt key */
+#define BOOTMAGIC_KEY_SALT              KC_ESC
+
+/* skip bootmagic and eeconfig */
+#define BOOTMAGIC_KEY_SKIP              KC_SPACE
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D5
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 13     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+#endif

keyboards/handwired/minorca/keymaps/rgb/keymap.c

@@ -0,0 +1,65 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "minorca.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _TB 3
+
+// Macro name shortcuts
+#define QWERTY M(_QWERTY)
+#define LOWER M(_LOWER)
+#define RAISE M(_RAISE)
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_QWERTY] = { /* Qwerty */
+  {KC_ESC,     KC_Q,       KC_W,       KC_E,       KC_R,     KC_T,    KC_Y,     KC_U,       KC_I,       KC_O,       KC_P,       KC_BSPC},
+  {FUNC(0),    KC_A,       KC_S,       KC_D,       KC_F,     KC_G,    KC_H,     KC_J,       KC_K,       KC_L,       XXXXXXX,    KC_QUOT},
+  {KC_LSFT,    XXXXXXX,    KC_Z,       KC_X,       KC_C,     KC_V,    KC_B,     KC_N,       KC_M,       KC_COMM,    KC_DOT,     FUNC(1)},
+  {KC_LCTL,    XXXXXXX,    KC_LGUI,    KC_LALT,    FUNC(2),  XXXXXXX, XXXXXXX,  FUNC(3),    XXXXXXX,    KC_RALT,    KC_APP,     KC_RCTL}
+},
+
+[_RAISE] = {
+  {S(KC_GRV),  S(KC_1),    S(KC_2),    S(KC_3),    S(KC_4),  S(KC_5), S(KC_6),  S(KC_7),    S(KC_8),    S(KC_9),    S(KC_0),    KC_BSPC},
+  {KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_PAUSE,   KC_TRNS,  KC_TRNS, KC_TRNS,  S(KC_MINS), S(KC_EQL),  S(KC_LBRC), XXXXXXX,    S(KC_BSLS)},
+  {KC_TRNS,    XXXXXXX,    KC_F1,      KC_F2,      KC_F3,    KC_F4,   KC_F5,    KC_F6,      KC_F7,      KC_F8,      KC_F9,      KC_ENT},
+  {KC_TRNS,    XXXXXXX,    KC_TRNS,    KC_TRNS,    KC_TRNS,  XXXXXXX, XXXXXXX,  KC_TRNS,    XXXXXXX,    KC_MNXT,    KC_MUTE,    KC_MPLY}
+},
+
+[_LOWER] = {
+  {KC_GRV,     KC_1,       KC_2,       KC_3,       KC_4,     KC_5,    KC_6,     KC_7,       KC_8,       KC_9,       KC_0,       KC_DELETE},
+  {KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,  KC_TRNS, KC_TRNS,  KC_MINS,    KC_EQL,     KC_LBRC,    XXXXXXX,    KC_BSLS},
+  {KC_TRNS,    XXXXXXX,    KC_F11,     KC_F12,     KC_F13,   KC_F14,  KC_F15,   KC_F16,     KC_F17,     KC_F18,     KC_PGUP,    KC_ENT},
+  {KC_TRNS,    XXXXXXX,    KC_TRNS,    KC_TRNS,    KC_TRNS,  XXXXXXX, XXXXXXX,  KC_TRNS,    XXXXXXX,    KC_HOME,    KC_PGDN,    KC_END}
+},
+
+[_TB] = { /* Tab */
+  {KC_ESC,     KC_CALC,    KC_WHOM,    KC_MAIL,    KC_MYCM,  KC_TRNS, KC_TRNS,  KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_PSCR,    KC_TRNS},
+  {KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,    KC_TRNS,    KC_TRNS,    XXXXXXX,    KC_TRNS},
+  {KC_TRNS,    XXXXXXX,    RGB_TOG,    RGB_MOD,    RGB_HUI,  RGB_HUD, RGB_SAI,  RGB_SAD,    RGB_VAI,    RGB_VAD,    KC_UP,      KC_ENT},
+  {BL_STEP,    XXXXXXX,    KC_TRNS,    KC_TRNS,    KC_TRNS,  XXXXXXX, XXXXXXX,  KC_TRNS,    XXXXXXX,    KC_LEFT,    KC_DOWN,    KC_RGHT}
+}
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_LAYER_TAP_KEY(_TB, KC_TAB),
+  [1]  = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT),
+  [2]  = ACTION_LAYER_TAP_KEY(_RAISE, KC_SPC),
+  [3]  = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC),
+};

keyboards/handwired/minorca/keymaps/rgb/readme.md

@@ -0,0 +1,25 @@
+#RGB backlight for MinOrca
+
+![wiring](example.jpg)
+
+Example of adding WS2812b LEDs to a MinOrca.
+
+http://www.40percent.club/2016/08/tiny-whale.html
+
+The keymap is a work in progress. The RGB functions are accessed by holding down the TAB key. 
+
+* Tab + Z		Toggle on/off
+* Tab + X		Mode
+* Tab + C		Hue+
+* Tab + V		Hue-
+* Tab + B		Saturation+
+* Tab + N		Saturation-
+* Tab + M		Brightness+
+* Tab + ,		Brightness-
+
+Example wiring:
+
+WS2812 data pin is connected to D5
+
+![wiring](wiring1.jpg)
+![wiring closeup](wiring2.jpg)

keyboards/handwired/minorca/minorca.c

@@ -0,0 +1,6 @@
+#include "minorca.h"
+
+void matrix_init_kb(void) {
+
+	matrix_init_user();
+}

keyboards/handwired/minorca/minorca.h

@@ -0,0 +1,6 @@
+#ifndef MINORCA_H
+#define MINORCA_H
+
+#include "quantum.h"
+
+#endif

keyboards/handwired/minorca/readme.md

@@ -0,0 +1,33 @@
+minorca keyboard firmware
+======================
+Handwired 40% keyboard
+
+http://www.panc.co/blog/minorcasebright-information-page
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme.md](/readme.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/planck folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use `make dfu` to program your PCB once you hit the reset button. 
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+To build with the default keymap, simply run `make`.
+
+### Other Keymaps
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
+```
+$ make KEYMAP=[default|jack|<name>]
+```
+Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
+
+### Notable forks (which some of the keymap files are from)
+- [Shane's Fork](https://github.com/shanecelis/tmk_keyboard/tree/master/keyboard/planck)
+- [Pierre's Fork](https://github.com/pcarrier/tmk_keyboard/blob/pcarrier/planck/keyboard/gh60/keymap_planck.c)
+- [Nathan's Fork](https://github.com/nathanrosspowell/tmk_keyboard/tree/planck-jack/keyboard/planck)
+- [Matthew's Fork](https://github.com/pepers/tmk_keyboard/tree/master/keyboard/planck_grid)

keyboards/hhkb/keymaps/shela/Makefile

@@ -0,0 +1 @@
+SRC += action_pseudo_lut.c

keyboards/hhkb/keymaps/shela/action_pseudo_lut.c

@@ -0,0 +1,142 @@
+#include "quantum.h"
+#include "action_pseudo_lut.h"
+
+static uint8_t send_key_shift_bit[SHIFT_BIT_SIZE];
+
+/*
+ * Pseudo layout action.
+ * This action converts a keycode in order to output the character according to the keymap you specified
+ * still your keyboard layout recognized wrongly on your OS.
+ * Memo: Using other layer keymap to get keycode
+ */
+void action_pseudo_lut(keyrecord_t *record, uint8_t base_keymap_id, const uint16_t (*keymap)[2]) {
+    static uint8_t prev_shift;
+    uint16_t keycode;
+    uint16_t pseudo_keycode;
+
+    /* get keycode from keymap you specified */
+    keycode = keymap_key_to_keycode(base_keymap_id, record->event.key);
+
+    prev_shift = keyboard_report->mods & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT));
+
+    if (record->event.pressed) {
+        /* when magic commands entered, keycode does not converted */
+        if (IS_COMMAND()) {
+            if (prev_shift) {
+                add_shift_bit(keycode);
+            }
+            register_code(keycode);
+            return;
+        }
+
+        if (prev_shift) {
+            pseudo_keycode = convert_keycode(keymap, keycode, true);
+            dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode);
+            add_shift_bit(keycode);
+
+            if (IS_LSFT(pseudo_keycode)) {
+                register_code(QK_LSFT ^ pseudo_keycode);
+            } else {
+                /* delete shift mod temporarily */
+                del_mods(prev_shift);
+                send_keyboard_report();
+                register_code(pseudo_keycode);
+                add_mods(prev_shift);
+                send_keyboard_report();
+            }
+        } else {
+            pseudo_keycode = convert_keycode(keymap, keycode, false);
+            dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode);
+
+            if (IS_LSFT(pseudo_keycode)) {
+                add_weak_mods(MOD_BIT(KC_LSFT));
+                send_keyboard_report();
+                register_code(QK_LSFT ^ pseudo_keycode);
+                /* on Windows, prevent key repeat to avoid unintended output */
+                unregister_code(QK_LSFT ^ pseudo_keycode);
+                del_weak_mods(MOD_BIT(KC_LSFT));
+                send_keyboard_report();
+            } else {
+                register_code(pseudo_keycode);
+            }
+        }
+    } else {
+        if (get_shift_bit(keycode)) {
+            del_shift_bit(keycode);
+            pseudo_keycode = convert_keycode(keymap, keycode, true);
+        } else {
+            pseudo_keycode = convert_keycode(keymap, keycode, false);
+        }
+        dprintf("released: %02X, converted: %04X\n", keycode, pseudo_keycode);
+
+        if (IS_LSFT(pseudo_keycode)) {
+            unregister_code(QK_LSFT ^ pseudo_keycode);
+        } else {
+            unregister_code(pseudo_keycode);
+        }
+    }
+}
+
+uint16_t convert_keycode(const uint16_t (*keymap)[2], uint16_t keycode, bool shift_modded)
+{
+    uint16_t pseudo_keycode;
+
+    switch (keycode) {
+        case KC_A ... KC_CAPSLOCK:
+#if defined(__AVR__)
+            if (shift_modded) {
+                pseudo_keycode = pgm_read_word(&keymap[keycode][1]);
+            } else {
+                pseudo_keycode = pgm_read_word(&keymap[keycode][0]);
+            }
+#else
+            if (shift_modded) {
+                pseudo_keycode = keymap[keycode][1];
+            } else {
+                pseudo_keycode = keymap[keycode][0];
+            }
+#endif
+            /* if undefined, use got keycode as it is */
+            if (pseudo_keycode == 0x00) {
+                if (shift_modded) {
+                    pseudo_keycode = S(keycode);
+                } else {
+                    pseudo_keycode = keycode;
+                }
+            }
+            break;
+        default:
+            if (shift_modded) {
+                pseudo_keycode = S(keycode);
+            } else {
+                pseudo_keycode = keycode;
+            }
+            break;
+    }
+    return pseudo_keycode;
+}
+
+uint8_t get_shift_bit(uint16_t keycode) {
+    if ((keycode >> 3) < SHIFT_BIT_SIZE) {
+        return send_key_shift_bit[keycode >> 3] & (1 << (keycode & 7));
+    } else {
+        dprintf("get_shift_bit: Can't get shift bit. keycode: %02X\n", keycode);
+        return 0;
+    }
+}
+
+void add_shift_bit(uint16_t keycode) {
+    if ((keycode >> 3) < SHIFT_BIT_SIZE) {
+        send_key_shift_bit[keycode >> 3] |= (1 << (keycode & 7));
+    } else {
+        dprintf("add_shift_bit: Can't add shift bit. keycode: %02X\n", keycode);
+    }
+}
+
+void del_shift_bit(uint16_t keycode) {
+    if ((keycode >> 3) < SHIFT_BIT_SIZE) {
+        send_key_shift_bit[keycode >> 3] &= ~(1 << (keycode & 7));
+    } else {
+        dprintf("del_shift_bit: Can't delete shift bit. keycode: %02X\n", keycode);
+    }
+}

keyboards/hhkb/keymaps/shela/action_pseudo_lut.h

@@ -0,0 +1,15 @@
+#ifndef ACTION_PSEUDO_LUT_H
+#define ACTION_PSEUDO_LUT_H
+
+#define SHIFT_BIT_SIZE (0xE7 / 8 + 1) // 1bit per 1key
+
+#define IS_LSFT(kc) ((QK_LSFT & (kc)) == QK_LSFT)
+
+void action_pseudo_lut(keyrecord_t *, uint8_t, const uint16_t (*)[2]);
+uint16_t convert_keycode(const uint16_t (*)[2], uint16_t, bool);
+
+uint8_t get_shift_bit(uint16_t);
+void add_shift_bit(uint16_t);
+void del_shift_bit(uint16_t);
+
+#endif

keyboards/hhkb/keymaps/shela/config.h

@@ -0,0 +1,12 @@
+#ifndef CONFIG_SHELA_H
+#define CONFIG_SHELA_H
+
+#include "../../config.h"
+
+#undef TAPPING_TERM
+#define TAPPING_TERM 230
+
+#define ONESHOT_TAP_TOGGLE 2
+#define ONESHOT_TIMEOUT 2000
+
+#endif

keyboards/hhkb/keymaps/shela/keymap.c

@@ -0,0 +1,179 @@
+/*
+ * HHKB Pro 2 US Layout for shela
+ */
+#include "hhkb.h"
+#include "keymap_jis2us.h"
+#include "action_pseudo_lut.h"
+
+enum keymap_layout {
+    BASE = 0,
+    PSEUDO_US,
+    DVORAK,
+    MOUSE,
+    TENKEY,
+    HHKB,
+    SPACE_FN,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /* Layer 0: Default Layer
+     * ,-----------------------------------------------------------------------------------------.
+     * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  `  | BSp |
+     * |-----------------------------------------------------------------------------------------|
+     * |  Tab   |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   \    |
+     * |-----------------------------------------------------------------------------------------|
+     * | Control  |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |   Enter    |
+     * |-----------------------------------------------------------------------------------------|
+     * |    Shift    |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |  Shift  | Fn0 |
+     * `-----------------------------------------------------------------------------------------'
+     *           |LAlt |  LGui  |               SpaceFN             |  RGui  |RAlt |
+     *           `-----------------------------------------------------------------'
+     */
+    [BASE] =
+        KEYMAP(KC_ESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_GRV, KC_BSPC, \
+               KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSLS, \
+               KC_LCTL,KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,KC_ENT, \
+         OSM(MOD_LSFT),KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,KC_FN0, \
+                               KC_LALT,KC_LGUI,                KC_FN2,                 KC_RGUI,KC_RALT),
+
+    /* Layer 1: Pseudo US Layout Layer */
+    [PSEUDO_US] =
+        KEYMAP(KC_ESC, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_BSPC, \
+               KC_TAB, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, \
+               KC_LCTL,KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_ENT, \
+         OSM(MOD_LSFT),KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_RSFT,KC_FN0, \
+                               KC_LGUI,KC_FN3,                 KC_FN2,                 KC_FN4 ,KC_RGUI),
+
+    /* Layer 2: Dvorak Layer
+     * ,-----------------------------------------------------------------------------------------.
+     * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  [  |  ]  |  `  | BSp |
+     * |-----------------------------------------------------------------------------------------|
+     * |  Tab   |  '  |  ,  |  .  |  P  |  Y  |  F  |  G  |  C  |  R  |  L  |  /  |  =  |   \    |
+     * |-----------------------------------------------------------------------------------------|
+     * | Control  |  A  |  O  |  E  |  U  |  I  |  D  |  H  |  T  |  N  |  S  |  -  |   Enter    |
+     * |-----------------------------------------------------------------------------------------|
+     * |    Shift    |  ;  |  Q  |  J  |  K  |  X  |  B  |  M  |  W  |  V  |  Z  |  Shift  | Fn0 |
+     * `-----------------------------------------------------------------------------------------'
+     *           |LAlt |  LGui  |              SpaceFN              |  RGui  |RAlt |
+     *           `-----------------------------------------------------------------'
+     */
+    [DVORAK] =
+        KEYMAP(KC_ESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_LBRC,KC_RBRC,KC_GRV, KC_BSPC, \
+               KC_TAB, KC_QUOT,KC_COMM,KC_DOT, KC_P,   KC_Y,   KC_F,   KC_G,   KC_C,   KC_R,   KC_L,   KC_SLSH,KC_EQL, KC_BSLS, \
+               KC_LCTL,KC_A,   KC_O,   KC_E,   KC_U,   KC_I,   KC_D,   KC_H,   KC_T,   KC_N,   KC_S,   KC_MINS,KC_ENT, \
+               KC_LSFT,KC_SCLN,KC_Q,   KC_J,   KC_K,   KC_X,   KC_B,   KC_M,   KC_W,   KC_V,   KC_Z,   KC_RSFT,KC_FN0, \
+                               KC_LALT,KC_LGUI,                KC_FN2,                 KC_RGUI,KC_RALT),
+
+    /* Layer 3: Mouse layer
+     * ,-----------------------------------------------------------------------------------------.
+     * | Esc | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 |     |     |
+     * |-----------------------------------------------------------------------------------------|
+     * |        |     |     |     |     |     | MwL | MwD | MwU | MwR |     |     |     |        |
+     * |-----------------------------------------------------------------------------------------|
+     * |          |     |     |     |     |     | McL | McD | McU | McR |     |     |            |
+     * |-----------------------------------------------------------------------------------------|
+     * |             |     |     |     |     |     | Mb1 | Mb2 | Mb3 |     |     |         | Fn0 |
+     * `-----------------------------------------------------------------------------------------'
+     *           |     |        |                Mb1                |        |     |
+     *           `-----------------------------------------------------------------'
+     */
+    [MOUSE] =
+        KEYMAP(KC_ESC, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_NO,  KC_TRNS, \
+               KC_TRNS,KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_WH_L,KC_WH_D,KC_WH_U,KC_WH_R,KC_NO,  KC_NO,  KC_NO,  KC_NO, \
+               KC_TRNS,KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_MS_L,KC_MS_D,KC_MS_U,KC_MS_R,KC_NO,  KC_NO,  KC_TRNS, \
+               KC_TRNS,KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_BTN1,KC_BTN2,KC_BTN3,KC_NO,  KC_NO,  KC_TRNS,KC_FN0, \
+                               KC_TRNS,KC_TRNS,                KC_BTN1,                KC_TRNS,KC_TRNS),
+
+    /* Layer 4: Tenkey layer
+     * ,-----------------------------------------------------------------------------------------.
+     * | Esc |     |     |     |     |     |     |     |     |     |  /  |  *  |  -  |     | BSp |
+     * |-----------------------------------------------------------------------------------------|
+     * |        |     |     |     |     |     |     |     |     |  7  |  8  |  9  |  +  |        |
+     * |-----------------------------------------------------------------------------------------|
+     * |          |     |     |     |     |     |     |     |     |  4  |  5  |  6  |   Enter    |
+     * |-----------------------------------------------------------------------------------------|
+     * |             |     |     |     |     |     |     |     |  1  |  2  |  3  |    +    | Fn0 |
+     * `-----------------------------------------------------------------------------------------'
+     *           |     |        |              SpaceFN              |   0    |  .  |
+     *           `-----------------------------------------------------------------'
+     */
+    [TENKEY] =
+        KEYMAP(KC_ESC, KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_PSLS,KC_PAST,KC_PMNS,KC_NO,  KC_BSPC, \
+               KC_TRNS,KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_KP_7,KC_KP_8,KC_KP_9,KC_PPLS,KC_NO, \
+               KC_TRNS,KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_KP_4,KC_KP_5,KC_KP_6,KC_PENT, \
+               KC_TRNS,KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_KP_1,KC_KP_2,KC_KP_3,KC_PPLS,KC_FN0, \
+                               KC_TRNS,KC_TRNS,                KC_FN2,                 KC_KP_0,KC_PDOT),
+
+    /* Layer 5: HHKB mode (HHKB Fn)
+     * ,-----------------------------------------------------------------------------------------.
+     * | Pwr | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 | Ins | Del |
+     * |-----------------------------------------------------------------------------------------|
+     * |  Caps  | Fn5 | Fn6 | Fn7 | Fn8 | Fn9 |     |     | Psc | Slk | Pus | Up  |     |  BSp   |
+     * |-----------------------------------------------------------------------------------------|
+     * |          | VoD | VoU | Mut |     |     |  *  |  /  | Hom | PgU | Lef | Rig |   Enter    |
+     * |-----------------------------------------------------------------------------------------|
+     * |             |     |     |     |     |     |  +  |  -  | End | PgD | Dow |         |     |
+     * `-----------------------------------------------------------------------------------------'
+     *           |     |        |                                   |        |     |
+     *           `-----------------------------------------------------------------'
+     */
+    [HHKB] =
+        KEYMAP(KC_PWR, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \
+               KC_CAPS,KC_FN5, KC_FN6, KC_FN7, KC_FN8, KC_FN9, KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,KC_UP,  KC_TRNS,KC_BSPC, \
+               KC_TRNS,KC_VOLD,KC_VOLU,KC_MUTE,KC_TRNS,KC_TRNS,KC_PAST,KC_PSLS,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT,KC_PENT, \
+               KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PPLS,KC_PMNS,KC_END, KC_PGDN,KC_DOWN,KC_TRNS,KC_TRNS, \
+                               KC_TRNS,KC_TRNS,                KC_TRNS,                KC_TRNS,KC_TRNS),
+
+    /* Layer 6: SpaceFN
+     * ,-----------------------------------------------------------------------------------------.
+     * |  `  | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 |     | Del |
+     * |-----------------------------------------------------------------------------------------|
+     * |        | End | Up  | Hom |     |     |     | Hom | Up  | End | Psc | Slk | Pau |  Ins   |
+     * |-----------------------------------------------------------------------------------------|
+     * |          | Lef | Dow | Rig | PgU |     | PgU | Lef | Dow | Rig |     |     |            |
+     * |-----------------------------------------------------------------------------------------|
+     * |             |     |     | PgD |     | Spc | PgD |  `  |  ~  |     |     |         |     |
+     * `-----------------------------------------------------------------------------------------'
+     *           |     |        |                                   |        |     |
+     *           `-----------------------------------------------------------------'
+     */
+    [SPACE_FN] =
+        KEYMAP(KC_GRV, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_NO,  KC_DEL, \
+               KC_TRNS,KC_END, KC_UP,  KC_HOME,KC_NO,  KC_NO,  KC_NO,  KC_HOME,KC_UP,  KC_END, KC_PSCR,KC_SLCK,KC_PAUS,KC_INS, \
+               KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_PGUP,KC_NO,  KC_PGUP,KC_LEFT,KC_DOWN,KC_RGHT,KC_NO,  KC_NO,  KC_TRNS, \
+               KC_TRNS,KC_NO,  KC_NO,  KC_PGDN,KC_NO,  KC_SPC, KC_PGDN,KC_GRV, KC_TILD,KC_NO,  KC_NO,  KC_TRNS,KC_NO, \
+                               KC_TRNS,KC_TRNS,                KC_TRNS,                KC_TRNS,KC_TRNS),
+};
+
+/*
+ * user defined action function
+ */
+enum function_id {
+    PSEUDO_US_FUNCTION,
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+    switch (id) {
+        case PSEUDO_US_FUNCTION:
+            action_pseudo_lut(record, BASE, keymap_jis2us);
+            break;
+    }
+}
+
+/*
+ * Fn action definition
+ */
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_MOMENTARY(HHKB),
+    [1] = ACTION_FUNCTION(PSEUDO_US_FUNCTION),
+    [2] = ACTION_LAYER_TAP_KEY(SPACE_FN, KC_SPACE),
+    [3] = ACTION_MODS_TAP_KEY(MOD_LALT, KC_MHEN),
+    [4] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_KANA),
+    [5] = ACTION_DEFAULT_LAYER_SET(BASE),
+    [6] = ACTION_DEFAULT_LAYER_SET(PSEUDO_US),
+    [7] = ACTION_DEFAULT_LAYER_SET(MOUSE),
+    [8] = ACTION_DEFAULT_LAYER_SET(TENKEY),
+    [9] = ACTION_DEFAULT_LAYER_SET(DVORAK),
+};

keyboards/hhkb/keymaps/shela/keymap_jis2us.h

@@ -0,0 +1,32 @@
+#ifndef KEYMAP_JIS2US_H
+#define KEYMAP_JIS2US_H
+
+/* keymap for convert from JIS to US */
+const uint16_t PROGMEM keymap_jis2us[][2] = {
+    [KC_A ... KC_CAPS] = { 0x00, 0x00 }, /* default value */
+
+    [KC_1]    = { KC_1,    KC_EXLM    }, /* 1 and ! -> 1 and ! */
+    [KC_2]    = { KC_2,    KC_LBRC    }, /* 2 and " -> 2 and @ */
+    [KC_3]    = { KC_3,    KC_HASH    }, /* 3 and # -> 3 and # */
+    [KC_4]    = { KC_4,    KC_DLR     }, /* 4 and $ -> 4 and $ */
+    [KC_5]    = { KC_5,    KC_PERC    }, /* 5 and % -> 5 and % */
+    [KC_6]    = { KC_6,    KC_EQL     }, /* 6 and & -> 6 and ^ */
+    [KC_7]    = { KC_7,    KC_CIRC    }, /* 7 and ' -> 7 and & */
+    [KC_8]    = { KC_8,    KC_DQT     }, /* 8 and ( -> 8 and * */
+    [KC_9]    = { KC_9,    KC_ASTR    }, /* 9 and ) -> 9 and ( */
+    [KC_0]    = { KC_0,    KC_LPRN    }, /* 0 and (no assign) -> 0 and ) */
+    [KC_MINS] = { KC_MINS, S(KC_RO)   }, /* - and = -> - and _ */
+    [KC_EQL]  = { KC_UNDS, KC_COLN    }, /* ^ and ~ -> = and + */
+    [KC_LBRC] = { KC_RBRC, KC_RCBR    }, /* @ and ` -> [ and { */
+    [KC_RBRC] = { KC_BSLS, KC_PIPE    }, /* [ and { -> ] and } */
+    [KC_BSLS] = { KC_JYEN, S(KC_JYEN) }, /* ] and } -> / and | */
+    [KC_NUHS] = { KC_NUHS, S(KC_NUHS) }, /* (no assign) */
+    [KC_SCLN] = { KC_SCLN, KC_QUOT    }, /* ; and + -> ; and : */
+    [KC_QUOT] = { KC_AMPR, KC_AT      }, /* : and * -> ' and " */
+    [KC_GRV]  = { KC_LCBR, KC_PLUS    }, /* (no assign) -> ` and ~ */
+    [KC_COMM] = { KC_COMM, KC_LT      }, /* , and < -> , and < */
+    [KC_DOT]  = { KC_DOT,  KC_GT      }, /* . and > -> . and > */
+    [KC_SLSH] = { KC_SLSH, KC_QUES    }, /* / and ? -> / and ? */
+};
+
+#endif

keyboards/hhkb/keymaps/shela/readme.md

@@ -0,0 +1,14 @@
+# Shela's HHKB Layout
+
+Layer 0: US Layout  
+Layer 1: Pseudo US Layout  
+Layer 2: Dvorak Layout  
+Layer 3: Mouse  
+Layer 4: Tenkey  
+Layer 5: HHKB Fn Key  
+Layer 6: SpaceFN  
+
+## Pseudo US Layout
+
+On japanese Windows, HHKB Professional 2 US layout model recognized wrongly as JIS layout without changing OS settings.  
+But, you can use HHKB like a US layout keyboard as it is.

keyboards/phantom/keymaps/xyverz/keymap.c

@@ -0,0 +1,104 @@
+#include "phantom.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+
+// Used for SHIFT_ESC
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QW 0
+#define _DV 1
+#define _CM 2
+#define _FL 3
+
+// Macro name shortcuts
+#define QWERTY M(_QW)
+#define DVORAK M(_DV)
+#define COLEMAK M(_CM)
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_QW] = { /* Layer 0: Qwerty */
+    {KC_ESC,  KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_SLCK, KC_PAUS},
+    {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  XXXXXXX, KC_BSPC, KC_INS,  KC_HOME, KC_PGUP},
+    {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,  KC_END,  KC_PGDN},
+    {KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX},
+    {KC_LSFT, XXXXXXX, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, XXXXXXX, KC_RSFT, XXXXXXX, KC_UP,   XXXXXXX},
+    {KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  XXXXXXX, XXXXXXX, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT}
+  },
+
+[_DV] = { /* Layer 1: Dvorak */
+    {KC_ESC,  KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_SLCK, KC_PAUS},
+    {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_LBRC, KC_RBRC, XXXXXXX, KC_BSPC, KC_INS,  KC_HOME, KC_PGUP},
+    {KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH, KC_EQL,  KC_BSLS, KC_DEL,  KC_END,  KC_PGDN},
+    {KC_CAPS, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS, XXXXXXX, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX},
+    {KC_LSFT, XXXXXXX, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    XXXXXXX, KC_RSFT, XXXXXXX, KC_UP,   XXXXXXX},
+    {KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  XXXXXXX, XXXXXXX, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT}
+  },
+
+[_CM] = { /* Layer 2: Colemak */
+    {KC_ESC,  KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_SLCK, KC_PAUS},
+    {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  XXXXXXX, KC_BSPC, KC_INS,  KC_HOME, KC_PGUP},
+    {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,  KC_END,  KC_PGDN},
+    {KC_BSPC, KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, XXXXXXX, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX},
+    {KC_LSFT, XXXXXXX, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, XXXXXXX, KC_RSFT, XXXXXXX, KC_UP,   XXXXXXX},
+    {KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  XXXXXXX, XXXXXXX, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT}
+  },
+
+[_FL] = { /* Layer 3: Functions */
+    {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+    {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, RESET,   KC_MPRV, KC_MPLY, KC_MNXT},
+    {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU},
+    {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX},
+    {_______, XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, XXXXXXX, _______, XXXXXXX},
+    {QWERTY,  DVORAK,  COLEMAK, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______, _______, _______},
+  },
+
+
+};
+
+enum function_id {
+    SHIFT_ESC,
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+      switch(id) {
+        case _DV:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_DV);
+          }
+          break;
+        case _QW:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_QW);
+          }
+          break;
+        case _CM:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_CM);
+          }
+          break;
+      }
+    return MACRO_NONE;
+};

keyboards/preonic/keymaps/jacwib/Makefile

@@ -0,0 +1,20 @@
+
+
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = yes          # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/preonic/keymaps/jacwib/config.h

@@ -0,0 +1,8 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#define FORCE_NKRO 1
+
+#endif

keyboards/preonic/keymaps/jacwib/keymap.c

@@ -0,0 +1,215 @@
+#include "preonic.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+#include "keymap_nordic.h"
+#ifdef AUDIO_ENABLE
+  #include "audio.h"
+#endif
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+enum preonic_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  BACKLIT
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   +  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Esc  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  |  Å   |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   Ö  |  Ä   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   <  |   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   .  |   ,  |  -   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | GUI  | Alt  |AltGr |Lower | Space| Enter|Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = {
+  {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    NO_PLUS, KC_BSPC},
+  {KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    NO_AM  },
+  {KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    NO_AE,   NO_OSLH},
+  {KC_LSFT, NO_LESS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_DOT,  KC_COMM, NO_MINS},
+  {KC_LCTL, KC_LGUI, KC_LALT, NO_ALGR, LOWER,   KC_SPC,  KC_ENT,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |      |   @  |   £  |   $  |      |      |   {  |   [  |   ]  |   }  |   \  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |VolUp |      |      |  ~   |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |LastS |PauseP|NextS |      |  *   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |   |  |      |      |      |      |      |      |VolDwn|      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |Bspc  |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = {
+  {_______, NO_AT,   NO_PND,  NO_DLR,  _______, _______, NO_LCBR, NO_LBRC, NO_RBRC, NO_RCBR, NO_BSLS, KC_DEL},
+  {_______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, _______, _______, NO_TILD},
+  {_______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, LSFT(KC_BSLS)},
+  {_______, NO_PIPE, _______, _______, _______, _______, _______, _______, KC_VOLD, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, KC_BSPC, _______, _______, _______, _______, _______}
+},
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   !  |   "  |   #  |   ¤  |   %  |   &  |   /  |   (  |   )  |   =  |   ?  | Ins  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |Mouse^|      |      |      |      |ScrlUp|      |      |  ^   |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |Mouse<|MouseV|Mouse>|      |      |MLC   |MMC   |MRC   |   '  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |   >  |      |      |      |      |      |      |ScrlDown| :  |  ;   |  _   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |Bspc  |      |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = {
+  {LSFT(KC_1),NO_QUO2,LSFT(KC_3), NO_BULT,LSFT(KC_5), NO_AMPR, NO_SLSH, NO_LPRN, NO_RPRN, NO_EQL,  NO_QUES, KC_INS},
+  {_______, _______, _______, KC_MS_U, _______, _______, _______, _______, KC_WH_U, _______, _______, NO_CIRC},
+  {_______, _______, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, KC_BTN1, KC_BTN3, KC_BTN2, NO_APOS, NO_QUOT},
+  {_______, NO_GRTR, _______, _______, _______, _______, _______, _______, KC_WH_D, NO_COLN, NO_SCLN, NO_UNDS},
+  {_______, _______, _______, _______, _______, KC_BSPC, _______, _______, _______, _______, _______, _______}
+},
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      | Reset|      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |Rsft  |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |MusOn |MusOff|      |      |      |      |      |      |      |      | Reset|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = {
+  {KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12},
+  {_______, _______, _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_RSFT},
+  {_______, MU_ON,   MU_OFF,  _______, _______, _______, _______, _______, _______, _______, _______, RESET  },
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+}
+
+
+};
+
+#ifdef AUDIO_ENABLE
+float tone_startup[][2] = {
+  {NOTE_B5, 20},
+  {NOTE_B6, 8},
+  {NOTE_DS6, 20},
+  {NOTE_B6, 8}
+};
+
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+
+float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+
+float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
+#endif
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+        case QWERTY:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+            #endif
+            persistant_default_layer_set(1UL<<_QWERTY);
+          }
+          return false;
+          break;
+        case LOWER:
+          if (record->event.pressed) {
+            layer_on(_LOWER);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          } else {
+            layer_off(_LOWER);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          }
+          return false;
+          break;
+        case RAISE:
+          if (record->event.pressed) {
+            layer_on(_RAISE);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          } else {
+            layer_off(_RAISE);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          }
+          return false;
+          break;
+        case BACKLIT:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+            #ifdef BACKLIGHT_ENABLE
+              backlight_step();
+            #endif
+          } else {
+            unregister_code(KC_RSFT);
+          }
+          return false;
+          break;
+      }
+    return true;
+};
+
+void matrix_init_user(void) {
+    #ifdef AUDIO_ENABLE
+        startup_user();
+    #endif
+}
+
+#ifdef AUDIO_ENABLE
+
+void startup_user()
+{
+    _delay_ms(20); // gets rid of tick
+    PLAY_NOTE_ARRAY(tone_startup, false, 0);
+}
+
+void shutdown_user()
+{
+    PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+    _delay_ms(150);
+    stop_all_notes();
+}
+
+void music_on_user(void)
+{
+    music_scale_user();
+}
+
+void music_scale_user(void)
+{
+    PLAY_NOTE_ARRAY(music_scale, false, 0);
+}
+
+#endif

keyboards/preonic/keymaps/jacwib/readme.md

@@ -0,0 +1,3 @@
+# Jacwib's preonic keymap.
+
+Designed for use with a swedish language.

keyboards/tv44/Makefile

@@ -0,0 +1,75 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+
+ifndef QUANTUM_DIR
+	include ../../Makefile
+endif
+
+

keyboards/tv44/config.h

@@ -0,0 +1,162 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEAE
+#define PRODUCT_ID      0x8844
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    Evan Sailer
+#define PRODUCT         TheVan 44
+#define DESCRIPTION     keyboard firmware for TV44
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D7, B5, F7, D4 }
+#define MATRIX_COL_PINS { D2, D3, D5, D6, B4, B6, F6, F5, F4, F1, F0, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+ 
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif

keyboards/tv44/keymaps/default/Makefile

@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/tv44/keymaps/default/config.h

@@ -0,0 +1,8 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif

keyboards/tv44/keymaps/default/keymap.c

@@ -0,0 +1,97 @@
+#include "tv44.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+#define _QW 0
+#define _DV 1
+#define _CM 2
+#define _L1 3
+#define _L2 4
+#define _L3 5
+
+// Macro name shortcuts
+#define QWERTY M(_QW)
+#define DVORAK M(_DV)
+#define COLEMAK M(_CM)
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QW] = { /* Qwerty */
+    {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC },
+    {MO(_L1), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, MO(_L1) },
+    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_F,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MO(_L2) },
+    {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_RALT, KC_ESC,  XXXXXXX, TG(_L3) }
+  },
+  [_DV] = { /* Dvorak */
+    {KC_TAB,  KC_COMM, KC_DOT,  KC_SLSH, KC_Q,    KC_Q,    KC_Q,    KC_Q,    KC_Q,    KC_Q,    KC_Q,    KC_BSPC },
+    {MO(_L1), KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    MO(_L1) },
+    {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    MO(_L2) },
+    {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_RALT, KC_ESC,  XXXXXXX, TG(_L3) }
+  },
+  [_CM] = { /* Colemak */
+    {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC },
+    {MO(_L1), KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    MO(_L1) },
+    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MO(_L2) },
+    {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_RALT, KC_ESC,  XXXXXXX, TG(_L3) }
+  },
+  [_L1] = { /* LAYER 1 */
+    {KC_GRV,  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL  },
+    {_______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_DOWN, KC_UP,   KC_LEFT, KC_RGHT, _______ },
+    {_______, KC_ESC,  _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT },
+    {_______, KC_LGUI, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, XXXXXXX, _______ }
+  },
+  [_L2] = { /* LAYER 2 */
+    {_______, QWERTY,  DVORAK,  COLEMAK, _______, _______, _______, KC_7,    KC_8,    KC_9,    KC_0,    _______ },
+    {KC_ESC,  KC_PIPE, KC_DQUO, KC_UNDS, KC_PLUS, LSFT(KC_LBRC), LSFT(KC_RBRC), KC_4,    KC_5,    KC_6,    KC_VOLU, KC_ENT  },
+    {_______, _______, _______, _______, _______, _______, KC_0,    KC_1,    KC_2,    KC_3,    KC_VOLD, _______ },
+    {_______, _______, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, XXXXXXX, _______ }
+  },
+  [_L3] = { /* LAYER 3 */
+    {_______, _______, _______, _______, _______, _______, _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   _______ },
+    {KC_ESC,  _______, _______, _______, _______, _______, _______, KC_F5,   KC_F6,   KC_F7,   KC_F8,   _______ },
+    {KC_LSFT, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______ },
+    {_______, KC_LSFT, KC_B,    KC_SPC,  XXXXXXX, XXXXXXX, XXXXXXX, KC_C,    _______, _______, XXXXXXX, _______ }
+  }
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+      switch(id) {
+        case _DV:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_DV);
+          }
+          break;
+        case _QW:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_QW);
+          }
+          break;
+        case _CM:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_CM);
+          }
+          break;
+      }
+    return MACRO_NONE;
+};

keyboards/tv44/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for tv44

keyboards/tv44/keymaps/xyverz/Makefile

@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/tv44/keymaps/xyverz/config.h

@@ -0,0 +1,8 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif

keyboards/tv44/keymaps/xyverz/keymap.c

@@ -0,0 +1,92 @@
+#include "tv44.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+#define _DV 0
+#define _QW 1
+#define _CM 2
+#define _L1 3
+#define _L2 4
+
+// Macro name shortcuts
+#define DVORAK M(_DV)
+#define QWERTY M(_QW)
+#define COLEMAK M(_CM)
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_DV] = { /* 0: Dvorak */
+    {KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC },
+    {MO(_L1), KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_ENT  },
+    {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT },
+    {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) }
+  },
+
+  [_QW] = { /* 1: Qwerty */
+    {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC },
+    {MO(_L1), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT  },
+    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT },
+    {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) }
+  },
+
+  [_CM] = { /* 2: Colemak */
+    {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC },
+    {MO(_L1), KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_ENT  },
+    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT },
+    {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) }
+  },
+
+  [_L1] = {/* 1: FN 1 */
+    {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL  },
+    {_______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_DOWN, KC_UP,   KC_LEFT, KC_RGHT, _______ },
+    {_______, _______, _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT },
+    {KC_ESC,  KC_LGUI, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, KC_SLSH, _______, _______ }
+  },
+
+  [_L2] = { /* 2: FN 2 */
+    {KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_ESC  },
+    {_______, KC_F11,  KC_F12,  _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_VOLU, KC_ENT  },
+    {_______, _______, _______, _______, _______, _______, _______, _______, KC_END,  KC_PGDN, KC_VOLD, _______ },
+    {QWERTY,  DVORAK,  COLEMAK, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______ }
+  }
+
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+      switch(id) {
+        case _DV:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_DV);
+          }
+          break;
+        case _QW:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_QW);
+          }
+          break;
+        case _CM:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_CM);
+          }
+          break;
+      }
+    return MACRO_NONE;
+};
+
+

keyboards/tv44/keymaps/xyverz/readme.md

@@ -0,0 +1 @@
+# The default keymap for tv44

keyboards/tv44/readme.md

@@ -0,0 +1,28 @@
+tv44 keyboard firmware
+======================
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/tv44 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+
+To build with the default keymap, simply run `make`.
+
+### Other Keymaps
+
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
+
+```
+$ make keymap=[default|jack|<name>]
+```
+
+Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`

keyboards/tv44/tv44.c

@@ -0,0 +1,28 @@
+#include "tv44.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/tv44/tv44.h

@@ -0,0 +1,22 @@
+#ifndef TV44_H
+#define TV44_H
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The following is an example using the Planck MIT layout
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+    K30, K31, K32, K33,           K37, K38,      K39,      K3B  \
+) \
+{ \
+    { K00,   K01,   K02,   K03,  K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B }, \
+    { K10,   K11,   K12,   K13,  K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B }, \
+    { K20,   K21,   K22,   K23,  K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B }, \
+    { K30,   K31,   K32,   K33,  KC_NO, KC_NO, KC_NO, K37,   K38,   K39,   K3A,   K3B }  \
+
+#endif

quantum/keymap.h

@@ -156,16 +156,16 @@ enum quantum_keycodes {
     BL_INC,
     BL_TOGG,
     BL_STEP,
-	
+
-	// RGB functionality
+    // RGB functionality
-	RGB_TOG,
+    RGB_TOG,
-	RGB_MOD,
+    RGB_MOD,
-	RGB_HUI,
+    RGB_HUI,
-	RGB_HUD,
+    RGB_HUD,
-	RGB_SAI,
+    RGB_SAI,
-	RGB_SAD,
+    RGB_SAD,
-	RGB_VAI,
+    RGB_VAI,
-	RGB_VAD,
+    RGB_VAD,
 
     // Left shift, open paren
     KC_LSPO,
@@ -309,7 +309,7 @@ enum quantum_keycodes {
 #define OSL(layer) (layer | QK_ONE_SHOT_LAYER)
 
 // One-shot mod
-#define OSM(layer) (layer | QK_ONE_SHOT_MOD)
+#define OSM(mod) (mod | QK_ONE_SHOT_MOD)
 
 // M-od, T-ap - 256 keycode max
 #define MT(mod, kc) (kc | QK_MOD_TAP | ((mod & 0xF) << 8))

quantum/process_keycode/process_unicode.c

@@ -13,7 +13,7 @@ uint16_t hex_to_keycode(uint8_t hex)
   }
 }
 
-void set_unicode_mode(uint8_t os_target)
+void set_unicode_input_mode(uint8_t os_target)
 {
   input_mode = os_target;
 }

readme.md

@@ -13,7 +13,7 @@ For an easy-to-read version of this document and the repository, check out [http
 * [Planck](/keyboards/planck/)
 * [Preonic](/keyboards/preonic/)
 * [Atomic](/keyboards/atomic/)
-* [ErgoDox EZ](/keyboards/ergodox_ez/)
+* [ErgoDox EZ](/keyboards/ergodox/ez/)
 * [Clueboard](/keyboards/clueboard/)
 * [Cluepad](/keyboards/cluepad/)
 
@@ -31,7 +31,7 @@ The OLKB product firmwares are maintained by [Jack Humbert](https://github.com/j
 
 This is not a tiny project. While this is the main readme, there are many other files you might want to consult. Here are some points of interest:
 
-* The readme for your own keyboard: This is found under `keyboards/<your keyboards's name>/`. So for the ErgoDox EZ, it's [here](keyboards/ergodox_ez/); for the Planck, it's [here](keyboards/planck/) and so on.
+* The readme for your own keyboard: This is found under `keyboards/<your keyboards's name>/`. So for the ErgoDox EZ, it's [here](keyboards/ergodox/ez/); for the Planck, it's [here](keyboards/planck/) and so on.
 * The list of possible keycodes you can use in your keymap is actually spread out in a few different places:
   * [doc/keycode.txt](doc/keycode.txt) - an explanation of those same keycodes.
   * [quantum/keymap.h](quantum/keymap.h) - this is where the QMK-specific aliases are all set up. Things like the Hyper and Meh key, the Leader key, and all of the other QMK innovations. These are also explained and documented below, but `keymap.h` is where they're actually defined.

util/travis_compiled_push.sh

@@ -7,6 +7,8 @@ rev=$(git rev-parse --short HEAD)
 git config --global user.name "Travis CI"
 git config --global user.email "jack.humb+travis.ci@gmail.com"
 
+make all-keymaps keyboard=ergodox/ez AUTOGEN=true
+
 find . -name ".build" | xargs rm -rf
 cd ..
 git clone https://$GH_TOKEN@github.com/jackhumbert/qmk.fm.git