Merge remote-tracking branch 'upstream/master'
Xyverz
8 years ago
commit
719f6f0293
@ -1,7 +1,7 @@
|
|||||||
#define ONESHOT_TIMEOUT 3000
|
#define ONESHOT_TIMEOUT 3000
|
||||||
#define TAPPING_TERM 200
|
#define TAPPING_TERM 200
|
||||||
#define PREVENT_STUCK_MODIFIERS
|
#define PREVENT_STUCK_MODIFIERS
|
||||||
|
#define FORCE_NKRO
|
||||||
#define LEADER_TIMEOUT 1000
|
#define LEADER_TIMEOUT 1000
|
||||||
|
|
||||||
#include "../../config.h"
|
#include "../../config.h"
|
||||||
|
|||||||
Binary file not shown.
|
Before Width: | Height: | Size: 448 KiB After Width: | Height: | Size: 446 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 420 KiB After Width: | Height: | Size: 415 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 423 KiB After Width: | Height: | Size: 423 KiB |
@ -0,0 +1,3 @@
|
|||||||
|
ifndef MAKEFILE_INCLUDED
|
||||||
|
include ../../Makefile
|
||||||
|
endif
|
||||||
@ -0,0 +1,43 @@
|
|||||||
|
#ifndef CONFIG_H
|
||||||
|
#define CONFIG_H
|
||||||
|
|
||||||
|
#include "config_common.h"
|
||||||
|
|
||||||
|
/* USB Device descriptor parameter */
|
||||||
|
#define VENDOR_ID 0xFEED
|
||||||
|
#define PRODUCT_ID 0x6060
|
||||||
|
#define DEVICE_VER 0x0001
|
||||||
|
#define MANUFACTURER GON
|
||||||
|
#define PRODUCT NerD
|
||||||
|
#define DESCRIPTION QMK port for the GON Nerd PCB
|
||||||
|
|
||||||
|
/* key matrix size */
|
||||||
|
#define MATRIX_ROWS 10
|
||||||
|
#define MATRIX_COLS 9
|
||||||
|
|
||||||
|
/* backlight */
|
||||||
|
#define BACKLIGHT_PIN B7
|
||||||
|
#define BACKLIGHT_LEVELS 3
|
||||||
|
|
||||||
|
/* matrix pins */
|
||||||
|
#define MATRIX_ROW_PINS { B4, E2, F4, F7, F1, F6, C6, F5, D7, C7 }
|
||||||
|
#define MATRIX_COL_PINS { E6, B0, B1, B2, B3, F0, D0, D5, D1 }
|
||||||
|
#define UNUSED_PINS
|
||||||
|
|
||||||
|
/* COL2ROW or ROW2COL */
|
||||||
|
#define DIODE_DIRECTION COL2ROW
|
||||||
|
|
||||||
|
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||||
|
#define DEBOUNCING_DELAY 5
|
||||||
|
|
||||||
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||||
|
#define LOCKING_SUPPORT_ENABLE
|
||||||
|
/* Locking resynchronize hack */
|
||||||
|
#define LOCKING_RESYNC_ENABLE
|
||||||
|
|
||||||
|
/* key combination for magic key command */
|
||||||
|
#define IS_COMMAND() ( \
|
||||||
|
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||||
|
)
|
||||||
|
|
||||||
|
#endif
|
||||||
@ -0,0 +1 @@
|
|||||||
|
#include "gonnerd.h"
|
||||||
@ -0,0 +1,42 @@
|
|||||||
|
#ifndef GONNERD_H
|
||||||
|
#define GONNERD_H
|
||||||
|
|
||||||
|
#include "quantum.h"
|
||||||
|
|
||||||
|
#define KEYMAP_TKL( \
|
||||||
|
K08, K09, K18, K19, K28, K29, K38, K39, K48, K49, K58, K59, K68, K69, K88, K89, \
|
||||||
|
K00, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, K80, K81, K84, \
|
||||||
|
K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, K82, K83, K85, \
|
||||||
|
K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K71, K65, \
|
||||||
|
K07, K79, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, K67, K86, \
|
||||||
|
K06, K05, K78, K70, K72, K73, K74, K75, K76, K77, K87 \
|
||||||
|
) \
|
||||||
|
{ \
|
||||||
|
{ K00, K10, K20, K30, K40, K50, K60, K70, K80 }, \
|
||||||
|
{ K01, K11, K21, K31, K41, K51, K61, K71, K81 }, \
|
||||||
|
{ K02, K12, K22, K32, K42, K52, K62, K72, K82 }, \
|
||||||
|
{ K03, K13, K23, K33, K43, K53, K63, K73, K83 }, \
|
||||||
|
{ K04, K14, K24, K34, K44, K54, K64, K74, K84 }, \
|
||||||
|
{ K05, K15, K25, K35, K45, K55, K65, K75, K85 }, \
|
||||||
|
{ K06, K16, K26, K36, K46, K56, K66, K76, K86 }, \
|
||||||
|
{ K07, K17, K27, K37, K47, K57, K67, K77, K87 }, \
|
||||||
|
{ K08, K18, K28, K38, K48, K58, K68, K78, K88 }, \
|
||||||
|
{ K09, K19, K29, K39, K49, K59, K69, K79, K89 } \
|
||||||
|
}
|
||||||
|
|
||||||
|
#define KEYMAP_60( \
|
||||||
|
K08, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, \
|
||||||
|
K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, \
|
||||||
|
K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K71, K65, \
|
||||||
|
K07, K79, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, K67, \
|
||||||
|
K06, K05, K78, K70, K72, K73, K74, K75 \
|
||||||
|
) KEYMAP_TKL( \
|
||||||
|
K08, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
|
||||||
|
KC_NO, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, KC_NO, KC_NO, KC_NO, \
|
||||||
|
K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, KC_NO, KC_NO, KC_NO, \
|
||||||
|
K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K71, K65, \
|
||||||
|
K07, K79, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, K67, KC_NO, \
|
||||||
|
K06, K05, K78, K70, K72, K73, K74, K75, KC_NO, KC_NO, KC_NO \
|
||||||
|
)
|
||||||
|
|
||||||
|
#endif
|
||||||
@ -0,0 +1,21 @@
|
|||||||
|
# Build Options
|
||||||
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
|
# the appropriate keymap folder that will get included automatically
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
|
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
|
MIDI_ENABLE = no # MIDI controls
|
||||||
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
|
UNICODE_ENABLE = no # Unicode
|
||||||
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||||
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
|
|
||||||
|
ifndef QUANTUM_DIR
|
||||||
|
include ../../../../Makefile
|
||||||
|
endif
|
||||||
@ -0,0 +1,16 @@
|
|||||||
|
#include "gonnerd.h"
|
||||||
|
|
||||||
|
// Keymap layers
|
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
[0] = KEYMAP_60( /* Base */
|
||||||
|
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC,\
|
||||||
|
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS,\
|
||||||
|
KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_NO, KC_ENT, \
|
||||||
|
KC_LSFT,KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,KC_NO, \
|
||||||
|
KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,MO(1), KC_RCTL),
|
||||||
|
};
|
||||||
|
|
||||||
|
const uint16_t PROGMEM fn_actions[] = {
|
||||||
|
|
||||||
|
};
|
||||||
@ -0,0 +1,21 @@
|
|||||||
|
# Build Options
|
||||||
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
|
# the appropriate keymap folder that will get included automatically
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
|
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
|
MIDI_ENABLE = no # MIDI controls
|
||||||
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
|
UNICODE_ENABLE = no # Unicode
|
||||||
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||||
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
|
|
||||||
|
ifndef QUANTUM_DIR
|
||||||
|
include ../../../../Makefile
|
||||||
|
endif
|
||||||
@ -0,0 +1,78 @@
|
|||||||
|
#include "gonnerd.h"
|
||||||
|
|
||||||
|
// Keymap layers
|
||||||
|
#define BASE_LAYER 0
|
||||||
|
#define FUNCTION_LAYER 1
|
||||||
|
#define SYSTEM_LAYER 2
|
||||||
|
|
||||||
|
// Key aliases
|
||||||
|
#define __x__ KC_NO
|
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
/* Layer 0: Default Layer
|
||||||
|
* ,-----------------------------------------------------------.
|
||||||
|
* |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| = | BSp |
|
||||||
|
* |-----------------------------------------------------------|
|
||||||
|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
|
||||||
|
* |-----------------------------------------------------------|
|
||||||
|
* |Funct | A| S| D| F| G| H| J| K| L| ;| '|Enter |
|
||||||
|
* |-----------------------------------------------------------|
|
||||||
|
* |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift |
|
||||||
|
* |-----------------------------------------------------------'
|
||||||
|
* | Ctl|Alt|Gui | Space |Gui |Alt| F2| Ctl |
|
||||||
|
* `-----------------------------------------------------------'
|
||||||
|
*/
|
||||||
|
[BASE_LAYER] = KEYMAP_60(
|
||||||
|
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
|
||||||
|
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
|
||||||
|
MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, __x__, KC_ENT, \
|
||||||
|
KC_LSFT, __x__, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, __x__, \
|
||||||
|
KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, MO(3), KC_RCTL \
|
||||||
|
),
|
||||||
|
|
||||||
|
/* Layer 1: Function Layer
|
||||||
|
* ,-----------------------------------------------------------.
|
||||||
|
* | | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11| F12| Del |
|
||||||
|
* |-----------------------------------------------------------|
|
||||||
|
* | |Prv|Ply|Nxt| | |Pg^|Hme|Up |End| |Br-|Br+| |
|
||||||
|
* |-----------------------------------------------------------|
|
||||||
|
* |Hold |Mte|Vl-|Vl+| | |Pgv|Lft|Dwn|Rgt| | | |
|
||||||
|
* |-----------------------------------------------------------|
|
||||||
|
* | | | | | | | | | | | | |
|
||||||
|
* |-----------------------------------------------------------'
|
||||||
|
* | | | | | | | | |
|
||||||
|
* `-----------------------------------------------------------'
|
||||||
|
*/
|
||||||
|
[FUNCTION_LAYER] = KEYMAP_60(
|
||||||
|
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \
|
||||||
|
__x__, KC_MPRV, KC_MPLY, KC_MNXT, __x__, __x__, KC_PGUP, KC_HOME, KC_UP, KC_END, __x__, KC_SLCK, KC_PAUS, __x__, \
|
||||||
|
KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, __x__, __x__, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, __x__, __x__, __x__, __x__, \
|
||||||
|
KC_LSFT, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
|
||||||
|
KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, __x__, __x__, __x__, __x__ \
|
||||||
|
),
|
||||||
|
|
||||||
|
/* Layer 2: System Layer
|
||||||
|
* ,-----------------------------------------------------------.
|
||||||
|
* |Reset| | | | | | | | | | | | | |
|
||||||
|
* |-----------------------------------------------------------|
|
||||||
|
* | | | | | | | | | | | | | | |
|
||||||
|
* |-----------------------------------------------------------|
|
||||||
|
* | | | | | | | | | | | | | |
|
||||||
|
* |-----------------------------------------------------------|
|
||||||
|
* | | | | | | | | | | | | |
|
||||||
|
* |-----------------------------------------------------------'
|
||||||
|
* | | | | | | | | |
|
||||||
|
* `-----------------------------------------------------------'
|
||||||
|
*/
|
||||||
|
[SYSTEM_LAYER] = KEYMAP_60(
|
||||||
|
RESET, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
|
||||||
|
__x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
|
||||||
|
__x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
|
||||||
|
__x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
|
||||||
|
__x__, __x__, __x__, __x__, __x__, __x__, KC_TRNS, __x__ \
|
||||||
|
),
|
||||||
|
};
|
||||||
|
|
||||||
|
const uint16_t PROGMEM fn_actions[] = {
|
||||||
|
|
||||||
|
};
|
||||||
@ -0,0 +1,5 @@
|
|||||||
|
# Mauin's keymap for the GON NerD
|
||||||
|
|
||||||
|
This layout is based on a Pok3r style layout with a standard base layer.
|
||||||
|
|
||||||
|
Function layers provide access to navigation and media keys.
|
||||||
@ -0,0 +1,34 @@
|
|||||||
|
GON NerD keyboard firmware
|
||||||
|
======================
|
||||||
|
|
||||||
|
## Changing Bootloader
|
||||||
|
|
||||||
|
It's not possible to simply flash this firmware on the GON NerD keyboard as the original bootloader does not support DFU connections.
|
||||||
|
|
||||||
|
It is possible to change the bootloader of the GON NerD with an ISP programmer. A guide on how to change the bootloader on your GON NerD can be found here:
|
||||||
|
[Converting NerD60 to TMK](https://deskthority.net/wiki/Converting_NerD60_to_TMK). After changing the bootloader you can flash your QMK keymap onto the keyboard.
|
||||||
|
|
||||||
|
_After changing the bootloader on your GON NerD PCB you will not be able to go back to the original firmware and the official configuration software will
|
||||||
|
not work anymore. You will lose your warranty and official support from GON!_
|
||||||
|
|
||||||
|
## Building
|
||||||
|
|
||||||
|
Download or clone the whole firmware and navigate to the keyboards/gonnerd folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
|
||||||
|
|
||||||
|
Depending on which keymap you would like to use, you will have to compile slightly differently.
|
||||||
|
|
||||||
|
### Default
|
||||||
|
|
||||||
|
To build with the default keymap, simply run `make default`.
|
||||||
|
|
||||||
|
### Other Keymaps
|
||||||
|
|
||||||
|
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
|
||||||
|
|
||||||
|
To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
|
||||||
|
|
||||||
|
```
|
||||||
|
$ make [default|jack|<name>]
|
||||||
|
```
|
||||||
|
|
||||||
|
Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
|
||||||
@ -0,0 +1,66 @@
|
|||||||
|
# MCU name
|
||||||
|
MCU = atmega32u4
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 8000000
|
||||||
|
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task(+60)
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
|
||||||
|
# Boot Section Size in *bytes*
|
||||||
|
# Teensy halfKay 512
|
||||||
|
# Teensy++ halfKay 1024
|
||||||
|
# Atmel DFU loader 4096
|
||||||
|
# LUFA bootloader 4096
|
||||||
|
# USBaspLoader 2048
|
||||||
|
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||||
|
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# change yes to no to disable
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||||
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
|
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||||
|
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
NKRO_ENABLE ?= no # USB Nkey Rollover
|
||||||
|
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality on B7 by default
|
||||||
|
MIDI_ENABLE ?= no # MIDI controls
|
||||||
|
UNICODE_ENABLE ?= no # Unicode
|
||||||
|
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||||
File diff suppressed because it is too large
Load Diff
@ -1,6 +1,38 @@
|
|||||||
#include "promethium.h"
|
#include "promethium.h"
|
||||||
|
#include "analog.h"
|
||||||
|
#include "timer.h"
|
||||||
|
#include "matrix.h"
|
||||||
|
|
||||||
void matrix_init_kb(void) {
|
// cubic fit {3.3, 0}, {3.5, 2.9}, {3.6, 5}, {3.7, 8.6}, {3.8, 36}, {3.9, 62}, {4.0, 73}, {4.05, 83}, {4.1, 89}, {4.15, 94}, {4.2, 100}
|
||||||
|
|
||||||
|
uint8_t battery_level(void) {
|
||||||
|
float voltage = analogRead(BATTERY_PIN) * 2 * 3.3 / 1024;
|
||||||
|
if (voltage < MIN_VOLTAGE) return 0;
|
||||||
|
if (voltage > MAX_VOLTAGE) return 255;
|
||||||
|
return (voltage - MIN_VOLTAGE) / (MAX_VOLTAGE - MIN_VOLTAGE) * 255;
|
||||||
|
}
|
||||||
|
|
||||||
|
__attribute__ ((weak))
|
||||||
|
void battery_poll(uint8_t level) {
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_init_kb(void) {
|
||||||
matrix_init_user();
|
matrix_init_user();
|
||||||
}
|
}
|
||||||
|
|
||||||
|
void matrix_scan_kb(void) {
|
||||||
|
static uint16_t counter = BATTERY_POLL;
|
||||||
|
counter++;
|
||||||
|
|
||||||
|
if (counter > BATTERY_POLL) {
|
||||||
|
counter = 0;
|
||||||
|
battery_poll(battery_level());
|
||||||
|
}
|
||||||
|
|
||||||
|
matrix_scan_user();
|
||||||
|
}
|
||||||
|
|
||||||
|
void led_set_kb(uint8_t usb_led) {
|
||||||
|
led_set_user(usb_led);
|
||||||
|
}
|
||||||
|
|
||||||
|
|||||||
Loading…
Reference in New Issue