Add Crawlpad 2017 files.

pjrc_hid
Cole Markham 7 years ago committed by Jack Humbert
parent 53b043d4ef
commit 6fddb31c4c

@ -0,0 +1,52 @@
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6070
#define DEVICE_VER 0x0001
#define MANUFACTURER WoodKeys.click
#define PRODUCT CrawlPad
#define DESCRIPTION ATX Keycrawl 2017
/* key matrix size */
#define MATRIX_ROWS 4
#define MATRIX_COLS 4
/* key matrix pins */
#define MATRIX_ROW_PINS { F0, F1, F4, F5 }
#define MATRIX_COL_PINS { D4, D5, D6, D7 }
#define UNUSED_PINS
/* Pins for custom per-row LEDs. Should be changed to use named pins. */
#define LED_ROW_PINS { 8, 9, 10, 11 }
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION ROW2COL
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
false \
)
/* prevent stuck modifiers */
#define PREVENT_STUCK_MODIFIERS
#ifdef RGBLIGHT_ENABLE
#define RGB_DI_PIN D3
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 3
#endif
#endif

@ -0,0 +1 @@
#include "crawlpad.h"

@ -0,0 +1,18 @@
#ifndef KB_H
#define KB_H
#include "quantum.h"
#define KEYMAP( \
K00, K01, K02, K03, \
K10, K11, K12, K13, \
K20, K21, K22, K23, \
K30, K31, K32, K33 \
) { \
{ K00, K01, K02, K03 }, \
{ K10, K11, K12, K13 }, \
{ K20, K21, K22, K23 }, \
{ K30, K31, K32, K33 } \
}
#endif

File diff suppressed because one or more lines are too long

@ -0,0 +1,117 @@
#include "../../crawlpad.h"
enum custom_keycodes {
BL1 = SAFE_RANGE,
BL2,
BL3,
BL4
};
const uint8_t LED_PINS[] = LED_ROW_PINS;
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KEYMAP(
KC_P7, KC_P8, KC_P9, KC_PPLS,
KC_P4, KC_P5, KC_P6, KC_PMNS,
KC_P1, KC_P2, KC_P3, KC_PAST,
MO(1), KC_P0, KC_PDOT, KC_ENT),
KEYMAP(
KC_NLCK, BL1, KC_TRNS, KC_PSLS,
RESET, BL2, KC_TRNS, KC_TRNS,
KC_TRNS, BL3, KC_TRNS, KC_TRNS,
KC_TRNS, BL4, KC_TRNS, KC_TRNS),
};
void set_led(int idx, bool enable) {
uint8_t pin = LED_PINS[idx];
if (enable) {
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF);
} else {
/* PORTx &= ~n */
_SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF);
}
}
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
return MACRO_NONE ;
}
void matrix_init_user(void) {
/* set LED row pins to output and low */
DDRB |= (1 << 4) | (1 << 5) | (1 << 6) | (1 << 7);
PORTB &= ~(1 << 4) & ~(1 << 5) & ~(1 << 6) & ~(1 << 7);
}
void matrix_scan_user(void) {
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case BL1:
if (record->event.pressed) {
PORTB |= (1 << 4);
} else {
PORTB &= ~(1 << 4);
}
return false;
case BL2:
if (record->event.pressed) {
PORTB |= (1 << 5);
} else {
PORTB &= ~(1 << 5);
}
return false;
case BL3:
if (record->event.pressed) {
PORTB |= (1 << 6);
} else {
PORTB &= ~(1 << 6);
}
return false;
case BL4:
if (record->event.pressed) {
PORTB |= (1 << 7);
} else {
PORTB &= ~(1 << 7);
}
return false;
}
return true;
}
void led_set_user(uint8_t usb_led) {
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
} else {
}
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
} else {
}
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
} else {
}
if (usb_led & (1 << USB_LED_COMPOSE)) {
} else {
}
if (usb_led & (1 << USB_LED_KANA)) {
} else {
}
}

@ -0,0 +1,17 @@
# Crawlpad
![Crawlpad](https://imgur.com/8BnztWo)
A 4x4 macropad/numpad, exclusively availabe at Keycrawl events.
Keyboard Maintainer: [Cole Markham](https://github.com/colemarkham)
Hardware Supported: Crawlpad
Hardware Availability: Exclusive to Keycrawl events, contact [awwwwwwyeaahhhhhh](https://www.reddit.com/user/awwwwwwyeaahhhhhh) for more details.
Make example for this keyboard (after setting up your build environment):
make crawlpad:default
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
For those that prefer a GUI tool, the crawlpad.json file in this repo can be used on [kbfirmware.com](http://kbfirmware.com].

@ -0,0 +1,56 @@
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
CONSOLE_ENABLE ?= no # Console for debug(+400)
COMMAND_ENABLE ?= no # Commands for debug and configuration
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE ?= no # [Crawlpad] Custom backlighting code is used, so this should not be enabled
AUDIO_ENABLE ?= no # [Crawlpad] This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below
RGBLIGHT_ENABLE ?= no # [Crawlpad] This can be enabled if a ws2812 strip is connected to the expansion port.
Loading…
Cancel
Save