Merge branch 'master' of github.com:qmk/qmk_firmware into handwire

docs/faq_build.md

@@ -1,40 +1,25 @@
 # Frequently Asked Build Questions
 
-This page covers questions about building QMK. If you have not yet you should read the [Build Environment Setup](getting_started_build_tools.md) and [Make Instructions](getting_started_make_guide.md) guides.
+This page covers questions about building QMK. If you haven't yet done so, you should read the [Build Environment Setup](getting_started_build_tools.md) and [Make Instructions](getting_started_make_guide.md) guides.
 
 ## Can't Program on Linux
-You will need proper permission to operate a device. For Linux users see udev rules below. Easy way is to use `sudo` command, if you are not familiar with this command check its manual with `man sudo` or this page on line.
+You will need proper permissions to operate a device. For Linux users, see the instructions regarding `udev` rules, below. If you have issues with `udev`, a work-around is to use the `sudo` command. If you are not familiar with this command, check its manual with `man sudo` or [see this webpage](https://linux.die.net/man/8/sudo).
 
-In short when your controller is ATMega32u4,
+An example of using `sudo`, when your controller is ATMega32u4:
 
     $ sudo dfu-programmer atmega32u4 erase --force
     $ sudo dfu-programmer atmega32u4 flash your.hex
     $ sudo dfu-programmer atmega32u4 reset
 
-or just
+or just:
 
     $ sudo make <keyboard>:<keymap>:dfu
 
-But to run `make` with root privilege is not good idea. Use former method if possible.
-
-## WINAVR is Obsolete
-It is no longer recommended and may cause some problem.
-See [TMK Issue #99](https://github.com/tmk/tmk_keyboard/issues/99).
-
-## USB VID and PID
-You can use any ID you want with editing `config.h`. Using any presumably unused ID will be no problem in fact except for very low chance of collision with other product.
-
-Most boards in QMK use `0xFEED` as the vendor ID. You should look through other keyboards to make sure you pick a unique Product ID.
-
-Also see this.
-https://github.com/tmk/tmk_keyboard/issues/150
-
-You can buy a really unique VID:PID here. I don't think you need this for personal use.
-- http://www.obdev.at/products/vusb/license.html
-- http://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1
+Note that running `make` with `sudo` is generally *not* a good idea, and you should use one of the former methods, if possible.
 
 ## Linux `udev` Rules
-On Linux you need proper privilege to access device file of MCU, you'll have to use `sudo` when flashing firmware. You can circumvent this with placing these files in `/etc/udev/rules.d/`.
+On Linux, you'll need proper privileges to access the MCU. You can either use
+`sudo` when flashing firmware, or place these files in `/etc/udev/rules.d/`.
 
 **/etc/udev/rules.d/50-atmel-dfu.rules:**
 ```
@@ -52,6 +37,21 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", MODE:="066
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
 ```
 
+## WINAVR is Obsolete
+It is no longer recommended and may cause some problem.
+See [TMK Issue #99](https://github.com/tmk/tmk_keyboard/issues/99).
+
+## USB VID and PID
+You can use any ID you want with editing `config.h`. Using any presumably unused ID will be no problem in fact except for very low chance of collision with other product.
+
+Most boards in QMK use `0xFEED` as the vendor ID. You should look through other keyboards to make sure you pick a unique Product ID.
+
+Also see this.
+https://github.com/tmk/tmk_keyboard/issues/150
+
+You can buy a really unique VID:PID here. I don't think you need this for personal use.
+- http://www.obdev.at/products/vusb/license.html
+- http://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1
 
 ## Cortex: `cstddef: No such file or directory`
 GCC 4.8 of Ubuntu 14.04 had this problem and had to update to 4.9 with this PPA.
@@ -61,7 +61,6 @@ https://github.com/tmk/tmk_keyboard/issues/212
 https://github.com/tmk/tmk_keyboard/wiki/mbed-cortex-porting#compile-error-cstddef
 https://developer.mbed.org/forum/mbed/topic/5205/
 
-
 ## `clock_prescale_set` and `clock_div_1` Not Available
 Your toolchain is too old to support the MCU. For example WinAVR 20100110 doesn't support ATMega32u2.
 

docs/getting_started_build_tools.md

@@ -31,11 +31,14 @@ git
 
 Install the dependencies with your favorite package manager.
 
-Debian/Ubuntu example:
+Debian / Ubuntu example:
 
     sudo apt-get update
     sudo apt-get install gcc unzip wget zip gcc-avr binutils-avr avr-libc dfu-programmer dfu-util gcc-arm-none-eabi binutils-arm-none-eabi libnewlib-arm-none-eabi
 
+Fedora / Red Hat example:
+    sudo dnf install gcc unzip wget zip dfu-util dfu-programmer avr-gcc avr-libc binutils-avr32-linux-gnu arm-none-eabi-gcc-cs arm-none-eabi-binutils-cs arm-none-eabi-newlib
+
 ## Nix
 
 If you're on [NixOS](https://nixos.org/), or have Nix installed on Linux or macOS, run `nix-shell` from the repository root to get a build environment.

docs/keymap.md

@@ -33,7 +33,7 @@ The state of the Keymap layer is determined by two 32 bit parameters:
 * **`default_layer_state`** indicates a base keymap layer (0-31) which is always valid and to be referred (the default layer).
 * **`layer_state`** has current on/off status of each layer in its bits.
 
-Keymap layer '0' is usually `default_layer`, wither other layers initially off after booting up the firmware, although this can configured differently in `config.h`. It is useful to change `default_layer` when you completely switch a key layout, for example, if you want to switch to Colemak instead of Qwerty.
+Keymap layer '0' is usually the `default_layer`, with other layers initially off after booting up the firmware, although this can configured differently in `config.h`. It is useful to change `default_layer` when you completely switch a key layout, for example, if you want to switch to Colemak instead of Qwerty.
 
     Initial state of Keymap          Change base layout
     -----------------------          ------------------

keyboards/1up60rgb/1up60rgb.c

@@ -0,0 +1 @@
+#include "1up60rgb.h"

keyboards/1up60rgb/1up60rgb.h

@@ -0,0 +1,20 @@
+#ifndef KB_H
+#define KB_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
+	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
+	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
+	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  K214 }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314 }, \
+	{ K400,  K401,  KC_NO, K403,  KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  KC_NO, K413,  K414 }  \
+}
+
+#endif

keyboards/1up60rgb/config.h

@@ -0,0 +1,58 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    1upkeyboards
+#define PRODUCT         1UP RGB Underglow PCB
+#define DESCRIPTION     60% keyboard with RGB underglow
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3, F4 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B6
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 5
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 20
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif

keyboards/1up60rgb/keymaps/default/keymap.c

@@ -0,0 +1,72 @@
+#include "1up60rgb.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	KEYMAP(
+		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT,
+		KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT,
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+	;
+
+	switch (id) {
+
+	}
+	return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+		DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+	} else {
+		DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+
+	} else {
+
+	}
+
+}

keyboards/1up60rgb/keymaps/iso/keymap.c

@@ -0,0 +1,72 @@
+#include "1up60rgb.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	KEYMAP(
+		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT,
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
+		KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT,
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+	;
+
+	switch (id) {
+
+	}
+	return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+		DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+	} else {
+		DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+
+	} else {
+
+	}
+
+}

keyboards/1up60rgb/keymaps/tsangan/keymap.c

@@ -0,0 +1,72 @@
+#include "1up60rgb.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	KEYMAP(
+		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT,
+		KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, KC_RALT, KC_RGUI, KC_RCTL),
+
+	KEYMAP(
+		RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL,
+		KC_TRNS, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_UP, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_RGHT, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_DOWN, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+	;
+
+	switch (id) {
+
+	}
+	return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+		DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+	} else {
+		DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+
+	} else {
+
+	}
+
+}

keyboards/1up60rgb/readme.md

@@ -0,0 +1,13 @@
+# 1upkeyboards 60% RGB
+
+Firmware for custom keyboard PCB with 60% key layout.
+
+Keyboard Maintainer: [rempired](https://github.com/rempired)  
+Hardware Supported: 1upkeyboards 60% RGB  
+Hardware Availability: [1upkeyboards](https://1upkeyboards.com/rgb-underglow-1up-pcb.html)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 1up60rgb:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/1up60rgb/rules.mk

@@ -0,0 +1,56 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= no	# Console for debug(+400)
+COMMAND_ENABLE ?= no    # Commands for debug and configuration
+SLEEP_LED_ENABLE ?= no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE ?= no
+RGBLIGHT_ENABLE ?= yes

keyboards/chimera_ergo/chimera_ergo.c

@@ -0,0 +1,31 @@
+#include "chimera_ergo.h"
+
+void uart_init(void) {
+	SERIAL_UART_INIT();
+}
+
+void led_init(void) {
+	DDRD  |= (1<<1);
+	PORTD |= (1<<1);
+	DDRF  |= (1<<4) | (1<<5);
+	PORTF |= (1<<4) | (1<<5);
+}
+
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	uart_init();
+	led_init();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+}
+
+void led_set_kb(uint8_t usb_led) {
+
+}

keyboards/chimera_ergo/chimera_ergo.h

@@ -0,0 +1,82 @@
+#ifndef CHIMERA_ERGO_H
+#define CHIMERA_ERGO_H
+
+#include "quantum.h"
+#include "matrix.h"
+#include "backlight.h"
+#include <stddef.h>
+
+#define red_led_off   PORTF |= (1<<5)
+#define red_led_on    PORTF &= ~(1<<5)
+#define blu_led_off   PORTF |= (1<<4)
+#define blu_led_on    PORTF &= ~(1<<4)
+#define grn_led_off   PORTD |= (1<<1)
+#define grn_led_on    PORTD &= ~(1<<1)
+
+#define set_led_off     red_led_off; grn_led_off; blu_led_off
+#define set_led_red     red_led_on;  grn_led_off; blu_led_off
+#define set_led_blue    red_led_off; grn_led_off; blu_led_on
+#define set_led_green   red_led_off; grn_led_on;  blu_led_off
+#define set_led_yellow  red_led_on;  grn_led_on;  blu_led_off
+#define set_led_magenta red_led_on;  grn_led_off; blu_led_on
+#define set_led_cyan    red_led_off; grn_led_on;  blu_led_on
+#define set_led_white   red_led_on;  grn_led_on;  blu_led_on
+
+/*
+#define LED_B 5
+#define LED_R 6
+#define LED_G 7
+
+#define all_leds_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
+
+#define red_led_on   PORTF |= (1<<LED_R)
+#define red_led_off  PORTF &= ~(1<<LED_R)
+#define grn_led_on   PORTF |= (1<<LED_G)
+#define grn_led_off  PORTF &= ~(1<<LED_G)
+#define blu_led_on   PORTF |= (1<<LED_B)
+#define blu_led_off  PORTF &= ~(1<<LED_B)
+
+#define set_led_off     PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
+#define set_led_red     PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_G) | (1<<LED_R)
+#define set_led_blue    PORTF = PORTF & ~(1<<LED_G) & ~(1<<LED_R) | (1<<LED_B)
+#define set_led_green   PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_R) | (1<<LED_G)
+#define set_led_yellow  PORTF = PORTF & ~(1<<LED_B) | (1<<LED_R) | (1<<LED_G)
+#define set_led_magenta PORTF = PORTF & ~(1<<LED_G) | (1<<LED_R) | (1<<LED_B)
+#define set_led_cyan    PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G)
+#define set_led_white   PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G)
+*/
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+#define KC_KEYMAP( \
+  k00, k01, k02, k03, k04, k05,      k06, k07, k08, k09, k10, k11, \
+  k12, k13, k14, k15, k16, k17,      k18, k19, k20, k21, k22, k23, \
+  k24, k25, k26, k27, k28, k29,      k30, k31, k32, k33, k34, k35, \
+  k36, k37, k38, k39, k40, k41,      k42, k43, k44, k45, k46, k47, \
+                      k48, k49,      k50, k51 \
+) \
+{ \
+	{ KC_NO,    KC_NO,    KC_##k26, KC_##k15, KC_##k28, KC_##k01,      KC_##k42, KC_##k31, KC_##k20, KC_##k33, KC_NO,    KC_NO     }, \
+	{ KC_##k00, KC_NO,    KC_##k14, KC_##k27, KC_##k16, KC_##k36,      KC_##k47, KC_##k19, KC_##k32, KC_##k21, KC_NO,    KC_##k11  }, \
+	{ KC_##k12, KC_##k25, KC_##k02, KC_##k39, KC_##k17, KC_##k49,      KC_##k50, KC_##k18, KC_##k44, KC_##k09, KC_##k34, KC_##k23  }, \
+	{ KC_##k24, KC_##k13, KC_##k38, KC_##k04, KC_##k05, KC_##k48,      KC_##k51, KC_##k06, KC_##k07, KC_##k45, KC_##k22, KC_##k35  },  \
+	{ KC_##k29, KC_##k41, KC_##k03, KC_##k40, KC_##k37, KC_NO,         KC_##k30, KC_##k43, KC_##k08, KC_##k10, KC_##k46, KC_NO     }, \
+}
+
+#define KEYMAP( \
+  k00, k01, k02, k03, k04, k05,      k06, k07, k08, k09, k10, k11, \
+  k12, k13, k14, k15, k16, k17,      k18, k19, k20, k21, k22, k23, \
+  k24, k25, k26, k27, k28, k29,      k30, k31, k32, k33, k34, k35, \
+  k36, k37, k38, k39, k40, k41,      k42, k43, k44, k45, k46, k47, \
+                      k48, k49,      k50, k51 \
+) \
+{ \
+	{ KC_NO, KC_NO, k26, k15, k28, k01,      k42, k31, k20, k33, KC_NO, KC_NO  }, \
+	{ k00,   KC_NO, k14, k27, k16, k36,      k47, k19, k32, k21, KC_NO, k11    }, \
+	{ k12,   k25,   k02, k39, k17, k49,      k50, k18, k44, k09, k34,   k23    }, \
+	{ k24,   k13,   k38, k04, k05, k48,      k51, k06, k07, k45, k22,   k35    },  \
+	{ k29,   k41,   k03, k40, k37, KC_NO,    k30, k43, k08, k10, k46,   KC_NO  }, \
+}
+
+#endif

keyboards/chimera_ergo/config.h

@@ -0,0 +1,87 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    unknown
+#define PRODUCT         Chimera Ergo
+#define DESCRIPTION     q.m.k. keyboard firmware for Chimera Ergo
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 12
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+//#define BACKLIGHT_LEVELS 3
+
+#define ONESHOT_TIMEOUT 500
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+#define PREVENT_STUCK_MODIFIERS
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+//UART settings for communication with the RF microcontroller
+#define SERIAL_UART_BAUD 1000000
+#define SERIAL_UART_DATA UDR1
+#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
+#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
+#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
+#define SERIAL_UART_INIT() do { \
+    	/* baud rate */ \
+    	UBRR1L = SERIAL_UART_UBRR; \
+    	/* baud rate */ \
+    	UBRR1H = SERIAL_UART_UBRR >> 8; \
+    	/* enable TX and RX */ \
+    	UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
+    	/* 8-bit data */ \
+    	UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
+  	} while(0)
+
+#endif

keyboards/chimera_ergo/keymaps/default/keymap.c

@@ -0,0 +1,206 @@
+// this is the style you want to emulate.
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+
+#include "chimera_ergo.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum chimera_ergo_layers
+{
+	_QWERTY,
+	_CAPS,
+	_NUMPAD,
+	_SYMBOLS,
+	_MACROS,
+	_NAV
+};
+
+#define KC_NMPD TG(_NUMPAD)
+#define KC_SYMB TG(_SYMBOLS)
+#define KC_SPFN LT(_NAV,KC_EQL)
+#define KC_SCTL MT(MOD_LCTL, KC_LBRC)
+#define KC_SCTR MT(MOD_LCTL, KC_RBRC)
+#define KC_SPLT MT(MOD_LALT, KC_MINS)
+#define KC_SPRT MT(MOD_LALT, KC_1)
+#define KC_GBRC MT(MOD_RGUI, KC_RBRC)
+#define KC_GQOT MT(MOD_LGUI, KC_QUOT)
+#define KC_MESC LT(_MACROS, KC_ESC)
+#define KC_INCL M(0)
+#define KC_PULL M(1)
+#define KC_PUSH M(2)
+#define KC_SCAP M(3)
+#define KC_SCOF M(4)
+#define KC_CAD LALT(LCTL(KC_DEL))
+
+#define LONGPRESS_DELAY 150
+//#define LAYER_TOGGLE_DELAY 300
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+#define KC_ KC_TRNS 
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = KC_KEYMAP(
+  //,----+----+----+----+----+----.     ,----+----+----+----+----+----.
+     LBRC, 1  ,SCTL,SPLT,SPFN, 5  ,       6  ,GBRC,SPRT,SCTR, 0  ,RBRC,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+     MESC, Q  , W  , E  , R  , T  ,       Y  , U  , I  , O  , P  ,QUOT,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+     TAB , A  , S  , D  , F  , G  ,       H  , J  , K  , L  ,SCLN,ENT ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+     LSPO, Z  , X  , C  , V  , B  ,       N  , M  ,COMM,DOT ,SLSH,RSPC,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+                         NMPD,BSPC,      SPC ,SYMB
+  // \------------------+----+----/      \---+----+----+--------------/
+  ),
+
+  [_CAPS] = KC_KEYMAP(
+  //,----+----+----+----+----+----.     ,----+----+----+----+----+----.
+         ,UNDS,    ,    ,    ,    ,          ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,          ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,          ,    ,    ,    ,COLN,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+     SCOF,    ,    ,    ,    ,    ,          ,    ,    ,    ,    ,SCOF,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+                             ,    ,          ,
+  // \------------------+----+----/      \---+----+----+--------------/
+  ),
+
+  [_NUMPAD] = KC_KEYMAP(
+  //,----+----+----+----+----+----.     ,----+----+----+----+----+----.
+         ,    ,    ,    ,    ,    ,          ,    ,    ,    ,MINS,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+         ,    ,COLN,    ,    ,    ,          , 7  , 8  , 9  ,ASTR,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+         ,    ,DOT ,    ,    ,    ,          , 4  , 5  , 6  ,PLUS,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,          , 1  , 2  , 3  ,SLSH,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+                             ,    ,          , 0
+  // \------------------+----+----/      \---+----+----+--------------/
+  ),
+
+  [_SYMBOLS] = KC_KEYMAP(
+  //,----+----+----+----+----+----.     ,----+----+----+----+----+----.
+         ,    ,    ,    ,    ,    ,          ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+         ,EXLM, AT ,HASH,DLR ,PERC,      CIRC,AMPR,ASTR,LPRN,RPRN,BSLS,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+      F1 , F2 , F3 , F4 , F5 , F6 ,      TILD,EQL ,UNDS,LCBR,RCBR,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+      F7 , F8 , F9 ,F10 ,F11 ,F12 ,      GRV ,PLUS,MINS,LBRC,RBRC,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+                         PIPE,    ,          ,
+  // \------------------+----+----/      \---+----+----+--------------/
+  ),
+
+  [_MACROS] = KC_KEYMAP(  
+  //,----+----+----+----+----+----.     ,----+----+----+----+----+----.
+         ,    ,    ,    ,    ,    ,          ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,          ,    ,INCL,    ,    ,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+         ,    ,    ,CAD ,    ,    ,          ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+     SCAP,    ,    ,    ,    ,    ,          ,    ,PULL,PUSH,    ,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+                             ,    ,          ,    
+  // \------------------+----+----/      \---+----+----+--------------/
+  ),
+
+  [_NAV] = KC_KEYMAP(  
+  //,----+----+----+----+----+----.     ,----+----+----+----+----+----.
+         ,    ,    ,    ,    ,    ,          ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,          ,PGUP, UP ,PGDN,PSCR,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,          ,LEFT,DOWN,RGHT,    ,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,          ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+                             ,DEL ,          ,    
+  // \------------------+----+----/      \---+----+----+--------------/
+  ),
+
+
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  switch(id) {
+    /* include some kind of library or header */
+    case 0:
+      if (record->event.pressed) {
+        SEND_STRING("#include <>");
+        return MACRO( T(LEFT), END);
+      }
+      break;
+    case 1:
+      if (record->event.pressed) {
+        SEND_STRING("git pull");
+        return MACRO( T(ENT), END );
+      }
+      break;
+    case 2:
+      if (record->event.pressed){
+        SEND_STRING("git push");
+        return MACRO( T(ENT), END );
+      }
+      break;
+    case 3:
+      if (record->event.pressed){
+        layer_on(_CAPS);
+        register_code(KC_CAPSLOCK);
+        unregister_code(KC_CAPSLOCK);
+      }
+      break;
+    case 4:
+      if (record->event.pressed){
+        layer_off(_CAPS);
+        register_code(KC_CAPSLOCK);
+        unregister_code(KC_CAPSLOCK);
+      }
+      break;
+  }
+  return MACRO_NONE;
+};
+ 
+
+void matrix_scan_user(void) {
+    uint8_t layer = biton32(layer_state);
+    
+    switch (layer) {
+    	case _QWERTY:
+    	    set_led_green;
+    	    break;
+        case _CAPS:
+	    set_led_white;
+	    break;
+        case _NUMPAD:
+            set_led_blue;
+            break;
+        case _SYMBOLS:
+            set_led_red;
+            break;
+        case _NAV:
+	    set_led_magenta;
+	    break;
+        case _MACROS:
+	    set_led_cyan;
+	    break;
+       default:
+            set_led_green;
+            break;
+    }
+};

keyboards/chimera_ergo/matrix.c

@@ -0,0 +1,164 @@
+/*
+Copyright 2012 Jun Wako
+Copyright 2014 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include <stdbool.h>
+#if defined(__AVR__)
+#include <avr/io.h>
+#endif
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "timer.h"
+
+#if (MATRIX_COLS <= 8)
+#    define print_matrix_header()  print("\nr/c 01234567\n")
+#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop(matrix[i])
+#    define ROW_SHIFTER ((uint8_t)1)
+#elif (MATRIX_COLS <= 16)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse16(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop16(matrix[i])
+#    define ROW_SHIFTER ((uint16_t)1)
+#elif (MATRIX_COLS <= 32)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse32(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop32(matrix[i])
+#    define ROW_SHIFTER  ((uint32_t)1)
+#endif
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+    matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+    matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void) {
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void) {
+    return MATRIX_COLS;
+}
+
+void matrix_init(void) {
+
+    matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void)
+{
+    SERIAL_UART_INIT();
+
+    uint32_t timeout = 0;
+
+    //the s character requests the RF slave to send the matrix
+    SERIAL_UART_DATA = 's';
+
+    //trust the external keystates entirely, erase the last data
+    uint8_t uart_data[14] = {0};
+
+    //there are 10 bytes corresponding to 10 columns, and an end byte
+    for (uint8_t i = 0; i < 14; i++) {
+        //wait for the serial data, timeout if it's been too long
+        //this only happened in testing with a loose wire, but does no
+        //harm to leave it in here
+        while(!SERIAL_UART_RXD_PRESENT){
+            timeout++;
+            if (timeout > 10000){
+                break;
+            }
+        } 
+        uart_data[i] = SERIAL_UART_DATA;
+    }
+
+    //check for the end packet, the key state bytes use the LSBs, so 0xE0
+    //will only show up here if the correct bytes were recieved
+    if (uart_data[10] == 0xE0)
+    {
+        //shifting and transferring the keystates to the QMK matrix variable
+        for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+            matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 6;
+        }
+    }
+
+
+    matrix_scan_quantum();
+    return 1;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print_matrix_header();
+
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        print_matrix_row(row);
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += matrix_bitpop(i);
+    }
+    return count;
+}

keyboards/chimera_ergo/readme.md

@@ -0,0 +1,19 @@
+# Chimera Ergo
+
+![Chimera Ergo](https://imgur.com/AA6ycMQ.jpg)
+
+A split wireless 40% ergonomic keyboard 
+
+Keyboard Maintainer: [William Wilson](https://github.com/GlenPickle)  
+
+
+Hardware Supported: Chimera Ergo PCB, WaveShare core nRF51822
+
+Hardware Availability: [Gerbers](https://github.com/GlenPickle/Chimera/tree/master/ergo/gerbers)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make chimera_ergo:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+

keyboards/chimera_ergo/rules.mk

@@ -0,0 +1,82 @@
+
+OPT_DEFS += -DCHIMERA_ERGO_PROMICRO
+CHIMERA_ERGO_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
+                         avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
+
+# # project specific files
+SRC = matrix.c
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes   # Commands for debug and configuration
+CUSTOM_MATRIX = yes    # Remote matrix from the wireless bridge
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - not yet supported in LUFA
+# BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+# MIDI_ENABLE = YES 		# MIDI controls
+UNICODE_ENABLE = YES 		# Unicode
+# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
+
+USB = /dev/ttyACM0

keyboards/chimera_ls/chimera_ls.c

@@ -0,0 +1,31 @@
+#include "chimera_ls.h"
+
+void uart_init(void) {
+	SERIAL_UART_INIT();
+}
+
+void led_init(void) {
+	DDRD  |= (1<<1);
+	PORTD |= (1<<1);
+	DDRF  |= (1<<4) | (1<<5);
+	PORTF |= (1<<4) | (1<<5);
+}
+
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	uart_init();
+	led_init();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+}
+
+void led_set_kb(uint8_t usb_led) {
+
+}

keyboards/chimera_ls/chimera_ls.h

@@ -0,0 +1,82 @@
+#ifndef CHIMERA_LETS_SPLIT_H
+#define CHIMERA_LETS_SPLIT_H
+
+#include "quantum.h"
+#include "matrix.h"
+#include "backlight.h"
+#include <stddef.h>
+
+#define red_led_off   PORTF |= (1<<5)
+#define red_led_on    PORTF &= ~(1<<5)
+#define blu_led_off   PORTF |= (1<<4)
+#define blu_led_on    PORTF &= ~(1<<4)
+#define grn_led_off   PORTD |= (1<<1)
+#define grn_led_on    PORTD &= ~(1<<1)
+
+#define set_led_off     red_led_off; grn_led_off; blu_led_off
+#define set_led_red     red_led_on;  grn_led_off; blu_led_off
+#define set_led_blue    red_led_off; grn_led_off; blu_led_on
+#define set_led_green   red_led_off; grn_led_on;  blu_led_off
+#define set_led_yellow  red_led_on;  grn_led_on;  blu_led_off
+#define set_led_magenta red_led_on;  grn_led_off; blu_led_on
+#define set_led_cyan    red_led_off; grn_led_on;  blu_led_on
+#define set_led_white   red_led_on;  grn_led_on;  blu_led_on
+
+/*
+#define LED_B 5
+#define LED_R 6
+#define LED_G 7
+
+#define all_leds_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
+
+#define red_led_on   PORTF |= (1<<LED_R)
+#define red_led_off  PORTF &= ~(1<<LED_R)
+#define grn_led_on   PORTF |= (1<<LED_G)
+#define grn_led_off  PORTF &= ~(1<<LED_G)
+#define blu_led_on   PORTF |= (1<<LED_B)
+#define blu_led_off  PORTF &= ~(1<<LED_B)
+
+#define set_led_off     PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
+#define set_led_red     PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_G) | (1<<LED_R)
+#define set_led_blue    PORTF = PORTF & ~(1<<LED_G) & ~(1<<LED_R) | (1<<LED_B)
+#define set_led_green   PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_R) | (1<<LED_G)
+#define set_led_yellow  PORTF = PORTF & ~(1<<LED_B) | (1<<LED_R) | (1<<LED_G)
+#define set_led_magenta PORTF = PORTF & ~(1<<LED_G) | (1<<LED_R) | (1<<LED_B)
+#define set_led_cyan    PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G)
+#define set_led_white   PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G)
+*/
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+
+#define KC_KEYMAP( \
+  k00, k01, k02, k03, k04, k05,           k06, k07, k08, k09, k10, k11, \
+  k12, k13, k14, k15, k16, k17,           k18, k19, k20, k21, k22, k23, \
+  k24, k25, k26, k27, k28, k29,           k30, k31, k32, k33, k34, k35, \
+  k36, k37, k38, k39, k40, k41,           k42, k43, k44, k45, k46, k47  \
+) \
+{ \
+	{ KC_##k43, KC_##k45, KC_##k34, KC_##k11, KC_##k23, KC_##k40, KC_##k38, KC_##k25, KC_##k00, KC_##k12 }, \
+	{ KC_##k31, KC_##k44, KC_##k46, KC_##k35, KC_##k22, KC_##k28, KC_##k39, KC_##k37, KC_##k24, KC_##k13 }, \
+	{ KC_##k30, KC_##k32, KC_##k33, KC_##k47, KC_##k09, KC_##k29, KC_##k27, KC_##k26, KC_##k36, KC_##k02 }, \
+	{ KC_##k19, KC_##k20, KC_##k21, KC_##k42, KC_##k18, KC_##k16, KC_##k15, KC_##k14, KC_##k41, KC_##k17 },  \
+	{ KC_##k06, KC_##k07, KC_##k08, KC_##k10, KC_NO,    KC_##k05, KC_##k04, KC_##k03, KC_##k01, KC_NO    }, \
+}
+
+#define KEYMAP( \
+  k00, k01, k02, k03, k04, k05,           k06, k07, k08, k09, k10, k11, \
+  k12, k13, k14, k15, k16, k17,           k18, k19, k20, k21, k22, k23, \
+  k24, k25, k26, k27, k28, k29,           k30, k31, k32, k33, k34, k35, \
+  k36, k37, k38, k39, k40, k41,           k42, k43, k44, k45, k46, k47  \
+) \
+{ \
+	{ k43, k45, k34, k11, k23, k40, k38, k25, k00, k12 }, \
+	{ k31, k44, k46, k35, k22, k28, k39, k37, k24, k13 }, \
+	{ k30, k32, k33, k47, k09, k29, k27, k26, k36, k02 }, \
+	{ k19, k20, k21, k42, k18, k16, k15, k14, k41, k17 },  \
+	{ k06, k07, k08, k10, KC_NO,    k05, k04, k03, k01, KC_NO    }, \
+}
+
+
+#endif

keyboards/chimera_ls/config.h

@@ -0,0 +1,87 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    unknown
+#define PRODUCT         Chimera Lets Split
+#define DESCRIPTION     q.m.k. keyboard firmware for Chimera Lets Split
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 12
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+//#define BACKLIGHT_LEVELS 3
+
+#define ONESHOT_TIMEOUT 500
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+#define PREVENT_STUCK_MODIFIERS
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+//UART settings for communication with the RF microcontroller
+#define SERIAL_UART_BAUD 1000000
+#define SERIAL_UART_DATA UDR1
+#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
+#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
+#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
+#define SERIAL_UART_INIT() do { \
+    	/* baud rate */ \
+    	UBRR1L = SERIAL_UART_UBRR; \
+    	/* baud rate */ \
+    	UBRR1H = SERIAL_UART_UBRR >> 8; \
+    	/* enable TX and RX */ \
+    	UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
+    	/* 8-bit data */ \
+    	UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
+  	} while(0)
+
+#endif

keyboards/chimera_ls/keymaps/default/keymap.c

@@ -0,0 +1,191 @@
+// this is the style you want to emulate.
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+
+#include "chimera_ls.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum chimera_lets_split_layers
+{
+	_QWERTY,
+	_CAPS,
+	_NUMPAD,
+	_SYMBOLS,
+	_MACROS,
+	_NAV
+};
+
+#define KC_NMPD TG(_NUMPAD)
+#define KC_SYMB TG(_SYMBOLS)
+#define KC_SPFN LT(_NAV,KC_EQL)
+#define KC_SCTL MT(MOD_LCTL, KC_BSLS)
+#define KC_SCTR MT(MOD_LCTL, KC_RBRC)
+#define KC_SPLT MT(MOD_LALT, KC_MINS)
+#define KC_MESC LT(_MACROS, KC_ESC)
+#define KC_INCL M(0)
+#define KC_PULL M(1)
+#define KC_PUSH M(2)
+#define KC_SCAP M(3)
+#define KC_SCOF M(4)
+#define KC_CAD LALT(LCTL(KC_DEL))
+
+#define LONGPRESS_DELAY 150
+//#define LAYER_TOGGLE_DELAY 300
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+#define KC_ KC_TRNS 
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = KC_KEYMAP(
+  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
+     MESC, Q  , W  , E  , R  , T  ,      Y  , U  , I  , O  , P  ,BSPC,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+     TAB , A  , S  , D  , F  , G  ,      H  , J  , K  , L  ,SCLN, ENT,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+     LSPO, Z  , X  , C  , V  , B  ,      N  , M  ,COMM,DOT ,SLSH,RSPC,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+     SCTL,SPFN,SPLT,AMPR,NMPD,SPC ,     SPC ,SYMB,ASTR,EXLM,LBRC,SCTR
+  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
+  ),
+
+  [_CAPS] = KC_KEYMAP(
+  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
+         ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,         ,    ,    ,    ,COLN,    ,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,UNDS,    ,    ,    ,         ,    ,    ,    ,    ,    
+  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
+  ),
+
+
+  [_NUMPAD] = KC_KEYMAP(
+  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
+         ,    ,    ,    ,    ,    ,         ,  7 ,  8 ,  9 ,MINS,QUOT,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,         ,  4 ,  5 ,  6 ,PLUS, ENT,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+     LSFT,    ,    ,    ,    ,    ,         ,  1 ,  2 ,  3 ,ASTR, EQL,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,BSPC,     SPC ,  0 ,  0 , DOT,SLSH,    
+  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
+  ),
+
+  [_SYMBOLS] = KC_KEYMAP(
+  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
+         ,EXLM, AT ,HASH,DLR ,PERC,     CIRC,AMPR,ASTR,LPRN,RPRN,QUOT,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+      F1 , F2 , F3 , F4 , F5 , F6 ,     TILD,EQL ,UNDS,LCBR,RCBR,PIPE,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+      F7 , F8 , F9 , F10, F11, F12,     GRV ,PLUS,MINS,LBRC,RBRC,BSLS,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,    ,    , NO ,BSPC,     SPC ,    ,    ,    ,    ,    
+  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
+  ),
+
+  [_NAV] = KC_KEYMAP(
+  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
+         ,    ,    ,    , DEL,BSPC,         ,HOME, UP , END, INS,PSCR,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,    ,LSFT,LCTL, ENT,         ,LEFT,DOWN,RGHT, DEL,   ,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,         ,PGUP,PGDN,    ,    ,    ,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,DEL ,         ,    ,    ,    ,    ,   
+  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
+  ),
+
+  [_MACROS] = KC_KEYMAP(
+  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
+         ,    ,    ,    ,    ,    ,         ,    ,INCL,    ,    ,    ,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,    ,CAD ,    ,    ,         ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+     SCAP,    ,    ,    ,    ,    ,         ,    ,PULL,PUSH,    ,SCAP,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,   
+  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
+  ),
+
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  switch(id) {
+    /* include some kind of library or header */
+    case 0:
+      if (record->event.pressed) {
+        SEND_STRING("#include <>");
+        return MACRO( T(LEFT), END);
+      }
+      break;
+    case 1:
+      if (record->event.pressed) {
+        SEND_STRING("git pull");
+        return MACRO( T(ENT), END );
+      }
+      break;
+    case 2:
+      if (record->event.pressed){
+        SEND_STRING("git push");
+        return MACRO( T(ENT), END );
+      }
+      break;
+    case 3:
+      if (record->event.pressed){
+        layer_on(_CAPS);
+        register_code(KC_CAPSLOCK);
+        unregister_code(KC_CAPSLOCK);
+      }
+      break;
+    case 4:
+      if (record->event.pressed){
+        layer_off(_CAPS);
+        register_code(KC_CAPSLOCK);
+        unregister_code(KC_CAPSLOCK);
+      }
+      break;
+  }
+  return MACRO_NONE;
+};
+ 
+
+void matrix_scan_user(void) {
+    uint8_t layer = biton32(layer_state);
+    
+    switch (layer) {
+    	case _QWERTY:
+    	    set_led_green;
+    	    break;
+        case _CAPS:
+	    set_led_white;
+	    break;
+        case _NUMPAD:
+            set_led_blue;
+            break;
+        case _SYMBOLS:
+            set_led_red;
+            break;
+        case _NAV:
+	    set_led_magenta;
+	    break;
+        case _MACROS:
+	    set_led_cyan;
+	    break;
+       default:
+            set_led_green;
+            break;
+    }
+};

keyboards/chimera_ls/matrix.c

@@ -0,0 +1,168 @@
+/*
+Copyright 2012 Jun Wako
+Copyright 2014 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include <stdbool.h>
+#if defined(__AVR__)
+#include <avr/io.h>
+#endif
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "timer.h"
+
+#if (MATRIX_COLS <= 8)
+#    define print_matrix_header()  print("\nr/c 01234567\n")
+#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop(matrix[i])
+#    define ROW_SHIFTER ((uint8_t)1)
+#elif (MATRIX_COLS <= 16)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse16(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop16(matrix[i])
+#    define ROW_SHIFTER ((uint16_t)1)
+#elif (MATRIX_COLS <= 32)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse32(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop32(matrix[i])
+#    define ROW_SHIFTER  ((uint32_t)1)
+#elif (MATRIX_COLS <= 64)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF0123456789ABCDEF0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse64(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop64(matrix[i])
+#    define ROW_SHIFTER  ((uint64_t)1)
+#endif
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+    matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+    matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void) {
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void) {
+    return MATRIX_COLS;
+}
+
+void matrix_init(void) {
+    matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void)
+{
+    SERIAL_UART_INIT();
+
+    uint32_t timeout = 0;
+
+    //the s character requests the RF slave to send the matrix
+    SERIAL_UART_DATA = 's';
+
+    //trust the external keystates entirely, erase the last data
+    uint8_t uart_data[11] = {0};
+
+    //there are 10 bytes corresponding to 10 columns, and an end byte
+    for (uint8_t i = 0; i < 11; i++) {
+        //wait for the serial data, timeout if it's been too long
+        //this only happened in testing with a loose wire, but does no
+        //harm to leave it in here
+        while(!SERIAL_UART_RXD_PRESENT){
+            timeout++;
+            if (timeout > 10000){
+                break;
+            }
+        } 
+        uart_data[i] = SERIAL_UART_DATA;
+    }
+
+    //check for the end packet, the key state bytes use the LSBs, so 0xE0
+    //will only show up here if the correct bytes were recieved
+    if (uart_data[10] == 0xE0)
+    {
+        //shifting and transferring the keystates to the QMK matrix variable
+        for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+            matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5;
+        }
+    }
+
+
+    matrix_scan_quantum();
+    return 1;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print_matrix_header();
+
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        print_matrix_row(row);
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += matrix_bitpop(i);
+    }
+    return count;
+}

keyboards/chimera_ls/readme.md

@@ -0,0 +1,19 @@
+# Chimera LS
+
+![Chimera LS](https://imgur.com/FOGlO4M.jpg)
+
+A wireless version of the let's split: a split 40% ortholinear keyboard 
+
+Keyboard Maintainer: [William Wilson](https://github.com/GlenPickle)  
+
+
+Hardware Supported: Chimera LS PCB, WaveShare core nRF51822
+
+Hardware Availability: [Gerbers](https://github.com/GlenPickle/Chimera/tree/master/ls/gerbers)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make chimera_ls:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+

keyboards/chimera_ls/rules.mk

@@ -0,0 +1,82 @@
+
+OPT_DEFS += -DCHIMERA_LS_PROMICRO
+CHIMERA_LS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
+                         avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
+
+# # project specific files
+SRC = matrix.c
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes   # Commands for debug and configuration
+CUSTOM_MATRIX = yes    # Remote matrix from the wireless bridge
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - not yet supported in LUFA
+# BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+# MIDI_ENABLE = YES 		# MIDI controls
+UNICODE_ENABLE = YES 		# Unicode
+# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
+
+USB = /dev/ttyACM0

keyboards/chimera_ortho/chimera_ortho.h

@@ -49,7 +49,7 @@
 // This a shortcut to help you visually see your layout.
 // The first section contains all of the arguements
 // The second converts the arguments into a two-dimensional array
-#define KEYMAP( \
+#define KC_KEYMAP( \
   k00, k01, k02, k03, k04, k05, k06,      k07, k08, k09, k10, k11, k12, k13, \
   k14, k15, k16, k17, k18, k19, k20,      k21, k22, k23, k24, k25, k26, k27, \
   k28, k29, k31, k32, k33, k34, k35,      k36, k37, k38, k41, k42, k43, k44,\
@@ -63,4 +63,17 @@
 	{ KC_NO,      KC_##k28, KC_##k14, KC_##k00, KC_##k45,      KC_##k48, KC_##k13, KC_##k27, KC_##k44, KC_NO }, \
 }
 
+#define KEYMAP( \
+  k00, k01, k02, k03, k04, k05, k06,      k07, k08, k09, k10, k11, k12, k13, \
+  k14, k15, k16, k17, k18, k19, k20,      k21, k22, k23, k24, k25, k26, k27, \
+  k28, k29, k31, k32, k33, k34, k35,      k36, k37, k38, k41, k42, k43, k44,\
+                      k45, k46,               k47, k48      \
+) \
+{ \
+	{ k01,   k02, k03, k04, k05,      k08, k09, k10, k11, k12   }, \
+	{ k15,   k16, k17, k18, k19,      k22, k23, k24, k25, k26   }, \
+	{ k29,   k31, k32, k33, k34,      k37, k38, k41, k42, k43   }, \
+	{ KC_NO,      k06, k20, k35, k46,      k47, k36, k21, k07, KC_NO },  \
+	{ KC_NO,      k28, k14, k00, k45,      k48, k13, k27, k44, KC_NO }, \
+}
 #endif

keyboards/chimera_ortho/keymaps/default/keymap.c

@@ -44,7 +44,7 @@ enum chimera_ortho_layers
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-  [_QWERTY] = KEYMAP(  
+  [_QWERTY] = KC_KEYMAP(  
   //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
      MESC, Q  , W  , E  , R  , T  ,SCTL,      SCTR, Y  , U  , I  , O  , P  ,QUOT,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
@@ -56,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   // \------------------+----+----+---/       \---+----+----+-------------------/
   ),
 
-  [_CAPS] = KEYMAP(  
+  [_CAPS] = KC_KEYMAP(  
   //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
          ,    ,    ,    ,    ,    ,    ,          ,    ,    ,    ,    ,    ,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
@@ -68,7 +68,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   // \------------------+----+----+---/       \---+----+----+-------------------/
   ),
 
-  [_NUMPAD] = KEYMAP(  
+  [_NUMPAD] = KC_KEYMAP(  
   //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
          ,    ,COLN ,    ,    ,    ,    ,          ,    , 7  , 8  , 9  ,ASTR,MINS,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
@@ -80,7 +80,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   // \------------------+----+----+---/       \---+----+----+-------------------/
   ),
 
-  [_SYMBOLS] = KEYMAP(  
+  [_SYMBOLS] = KC_KEYMAP(  
   //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
          ,EXLM, AT ,HASH,DLR ,PERC,    ,          ,CIRC,AMPR,ASTR,LPRN,RPRN,BSLS,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
@@ -92,7 +92,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   // \------------------+----+----+---/       \---+----+----+-------------------/
   ),
 
-  [_NAV] = KEYMAP(  
+  [_NAV] = KC_KEYMAP(  
   //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
          ,    ,    ,    ,    ,    ,    ,          ,    ,    , UP ,    ,PSCR,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
@@ -104,7 +104,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   // \------------------+----+----+---/       \---+----+----+-------------------/
   ),
 
-  [_MACROS] = KEYMAP(  
+  [_MACROS] = KC_KEYMAP(  
   //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
          ,    ,    ,    ,    ,    ,    ,          ,    ,    ,INCL,    ,    ,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|

keyboards/chimera_ortho/keymaps/gordon/keymap.c

@@ -206,7 +206,7 @@ qk_tap_dance_action_t tap_dance_actions[] = {
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-  [_QWERTY] = KEYMAP(
+  [_QWERTY] = KC_KEYMAP(
   //,----+----+----+----+----+----+----.      ,----+----+----+----+----+----+----.
      MESC, Q  ,CSHW,ENAV, R  , T  ,SPC ,       CLPS, Y  , U  ,INAV, O  , P  ,TTT,
   //|----+----+----+----+----+----+----|      |----+----+----+----+----+----+----|
@@ -218,7 +218,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   // \------------------+----+----+---/       \---+----+----+-------------------/
   ),
 
-  [_NUMPAD] = KEYMAP(  
+  [_NUMPAD] = KC_KEYMAP(  
   //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
          ,    ,    ,    ,ASTR,    ,    ,          ,    , 7  , 8  , 9  ,ASTR,/**/,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
@@ -230,7 +230,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   // \------------------+----+----+---/       \---+----+----+-------------------/
   ),
 
-  [_SYMBOLS] = KEYMAP(  
+  [_SYMBOLS] = KC_KEYMAP(  
   //,----+----+-----+----+----+----+----.     ,----+----+----+----+----+----+----.
          ,EXLM, AT  ,LCBR,RCBR,HASH,    ,          ,CIRC,AMPR,ASTR,LPRN,RPRN,/**/,
   //|----+----+-----+----+----+----+----|     |----+----+----+----+----+----+----|
@@ -242,7 +242,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   // \-------------------+----+----+---/       \---+----+----+-------------------/
   ),
 
-  [_FUNCTION] = KEYMAP(  
+  [_FUNCTION] = KC_KEYMAP(  
   //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
     F6F7 ,F1  ,F2  ,F3  ,ALF4,F5  ,F6  ,      F7  ,F8  ,F9  ,F10 ,F11 ,F12 ,/**/,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
@@ -254,7 +254,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   // \------------------+----+----+---/       \---+----+----+-------------------/
   ),
 
-  [_NAV] = KEYMAP(  
+  [_NAV] = KC_KEYMAP(  
   //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
       ,   ,SNAPLEFT,/**/,SNAPRIGHT,,  ,           ,    ,    , UP ,    ,    ,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
@@ -266,7 +266,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   // \------------------+----+----+---/       \---+----+----+-------------------/
   ),
 
-  [_TEXTNAV] = KEYMAP(  
+  [_TEXTNAV] = KC_KEYMAP(  
   //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
          ,   ,    ,    ,    ,    ,  ,             ,    ,    ,/**/,    ,    ,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
@@ -278,7 +278,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   // \------------------+----+----+---/       \---+----+----+-------------------/
   ),
 
-   [_MOUSE] = KEYMAP(  
+   [_MOUSE] = KC_KEYMAP(  
   //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
          ,    ,    ,MS_UP,   ,   ,    ,      ,    ,    , UP ,    ,    ,    ,/**/
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
@@ -291,7 +291,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ), 
 
 
-  [_MACROS] = KEYMAP(  
+  [_MACROS] = KC_KEYMAP(  
   //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
     /**/,RESET,SECRET_2,SECRET_3,   ,   ,   ,SYSTEM_SLEEP,    ,    ,INCL,    ,    ,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|

keyboards/deltasplit75/split_util.h

@@ -2,11 +2,8 @@
 #define SPLIT_KEYBOARD_UTIL_H
 
 #include <stdbool.h>
+#include "eeconfig.h"
 
-#ifdef EE_HANDS
-	#define EECONFIG_BOOTMAGIC_END      (uint8_t *)10
-	#define EECONFIG_HANDEDNESS         EECONFIG_BOOTMAGIC_END
-#endif
 
 #define SLAVE_I2C_ADDRESS           0x32
 

keyboards/dilly/README.md

@@ -0,0 +1,14 @@
+Dilly
+=====
+
+A 3x10 ortholinear keyboard using Kailh PG1350 Lower Profile Choc switches.
+
+Keyboard Maintainer: Keebio  
+Hardware Supported: Dilly PCB, Arduino Pro Micro  
+Hardware Availability: [Keebio](https://keeb.io)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make dilly:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/dilly/config.h

@@ -0,0 +1,62 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xCB10
+#define PRODUCT_ID      0x113a
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    Keebio
+#define PRODUCT         Dilly
+#define DESCRIPTION     30 percent ortholinear keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 5
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D7, E6, B4, B1, B3, B2 }
+#define MATRIX_COL_PINS { D2, D4, C6, F6, F5 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B5
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+#define RGB_DI_PIN D3
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 10
+#define ws2812_PORTREG  PORTD
+#define ws2812_DDRREG   DDRD
+
+#endif

keyboards/dilly/dilly.c

@@ -0,0 +1 @@
+#include "dilly.h"

keyboards/dilly/dilly.h

@@ -0,0 +1,31 @@
+#ifndef DILLY_H
+#define DILLY_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+    A1, A2, A3, A4, A5, A6, A7, A8, A9, A10, \
+    B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, \
+    C1, C2, C3, C4, C5, C6, C7, C8, C9, C10 \
+) { \
+    { A1, A2, A3, A4, A5 }, \
+    { B1, B2, B3, B4, B5 }, \
+    { C1, C2, C3, C4, C5 }, \
+    { A10, A9, A8, A7, A6 }, \
+    { B10, B9, B8, B7, B6 }, \
+    { C10, C9, C8, C7, C6 } \
+}
+
+// Used to create a keymap using only KC_ prefixed keys
+#define KC_KEYMAP( \
+    A1, A2, A3, A4, A5, A6, A7, A8, A9, A10, \
+    B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, \
+    C1, C2, C3, C4, C5, C6, C7, C8, C9, C10 \
+) \
+    KEYMAP( \
+        KC_##A1, KC_##A2, KC_##A3, KC_##A4, KC_##A5, KC_##A6, KC_##A7, KC_##A8, KC_##A9, KC_##A10, \
+        KC_##B1, KC_##B2, KC_##B3, KC_##B4, KC_##B5, KC_##B6, KC_##B7, KC_##B8, KC_##B9, KC_##B10, \
+        KC_##C1, KC_##C2, KC_##C3, KC_##C4, KC_##C5, KC_##C6, KC_##C7, KC_##C8, KC_##C9, KC_##C10 \
+    )
+
+#endif

keyboards/dilly/keymaps/default/config.h

@@ -0,0 +1,6 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#endif

keyboards/dilly/keymaps/default/keymap.c

@@ -0,0 +1,107 @@
+#include "dilly.h"
+#include "action_layer.h"
+
+extern keymap_config_t keymap_config;
+
+#define _BASE 0
+#define _FN1 1
+#define _FN2 2
+#define _FN3 3
+#define _FN4 4
+#define _FN5 5
+
+#define KC_ KC_TRNS
+#define _______ KC_TRNS
+
+// Tap-Hold keys
+#define KC_ASFT MT(MOD_LSFT, KC_A)
+#define KC_F_L3 LT(_FN3, KC_F)
+#define KC_ZCTL MT(MOD_LCTL, KC_Z)
+#define KC_XALT MT(MOD_LALT, KC_X)
+#define KC_CGUI MT(MOD_LGUI, KC_C)
+#define KC_V_L4 LT(_FN4, KC_V)
+#define KC_SPL2 LT(_FN2, KC_SPC)
+#define KC_B_L1 LT(_FN1, KC_B)
+#define KC_N_L5 LT(_FN5, KC_N)
+#define KC_MALT MT(MOD_RALT, KC_M)
+#define KC_BSCT MT(MOD_RCTL, KC_BSPC)
+#define KC_ENTS MT(MOD_RSFT, KC_ENT)
+#define KC_ESCS MT(MOD_RSFT, KC_ESC)
+
+#define KC_GUIC LGUI(KC_C)
+
+#define KC_RST RESET
+#define KC_BL_S BL_STEP
+#define KC_DBUG DEBUG
+#define KC_RTOG RGB_TOG
+#define KC_RMOD RGB_MOD
+#define KC_RHUI RGB_HUI
+#define KC_RHUD RGB_HUD
+#define KC_RSAI RGB_SAI
+#define KC_RSAD RGB_SAD
+#define KC_RVAI RGB_VAI
+#define KC_RVAD RGB_VAD
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_BASE] = KC_KEYMAP(
+  //,----+----+----+----+----+----+----+----+----+----.
+      Q  , W  , E  , R  , T  , Y  , U  , I  , O  , P  ,
+  //|----+----+----+----+----+----+----+----+----+----|
+     ASFT, S  , D  ,F_L3, G  , H  , J  , K  , L  ,ESCS,
+  //|----+----+----+----+----+----+----+----+----+----|
+     ZCTL,XALT,CGUI,V_L4,SPL2,B_L1,N_L5,MALT,BSCT,ENTS
+  //`----+----+----+----+----+----+----+----+----+----'
+  ),
+
+  [_FN1] = KC_KEYMAP(
+  //,----+----+----+----+----+----+----+----+----+----.
+      1  , 2  , 3  , 4  , 5  , 6  , 7  , 8  , 9  , 0  ,
+  //|----+----+----+----+----+----+----+----+----+----|
+      F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,
+  //|----+----+----+----+----+----+----+----+----+----|
+         ,    ,    ,    ,BSPC,    ,    ,    ,    ,    
+  //`----+----+----+----+----+----+----+----+----+----'
+  ),
+
+  [_FN2] = KC_KEYMAP(
+  //,----+----+----+----+----+----+----+----+----+----.
+     EXLM, AT ,HASH,DLR ,PERC,CIRC,AMPR,ASTR,LPRN,RPRN,
+  //|----+----+----+----+----+----+----+----+----+----|
+     F11 ,F12 ,    ,    ,    ,    ,    ,    ,    ,GRV ,
+  //|----+----+----+----+----+----+----+----+----+----|
+         ,    ,    ,    ,    ,DEL ,    ,    ,    ,    
+  //`----+----+----+----+----+----+----+----+----+----'
+  ),
+
+  [_FN3] = KC_KEYMAP(
+  //,----+----+----+----+----+----+----+----+----+----.
+         ,    ,    ,    ,    ,MINS,EQL ,LBRC,RBRC,BSLS,
+  //|----+----+----+----+----+----+----+----+----+----|
+     TAB ,    ,    ,    ,    ,COMM,DOT ,SLSH,SCLN,QUOT,
+  //|----+----+----+----+----+----+----+----+----+----|
+         ,    ,    ,    ,BSPC,    ,LEFT,DOWN, UP ,RGHT
+  //`----+----+----+----+----+----+----+----+----+----'
+  ),
+
+  [_FN4] = KC_KEYMAP(
+  //,----+----+----+----+----+----+----+----+----+----.
+         ,    ,    ,    ,    ,UNDS,PLUS,LCBR,RCBR,PIPE,
+  //|----+----+----+----+----+----+----+----+----+----|
+     TAB ,    ,    ,    ,    , LT , GT ,QUES,COLN,DQUO,
+  //|----+----+----+----+----+----+----+----+----+----|
+         ,    ,GUIC,    ,BSPC,    ,HOME,PGDN,PGUP,END 
+  //`----+----+----+----+----+----+----+----+----+----'
+  ),
+
+  [_FN5] = KC_KEYMAP(
+  //,----+----+----+----+----+----+----+----+----+----.
+     RTOG,RMOD,    ,RST ,RHUI,RSAI,RVAI,    ,    ,    ,
+  //|----+----+----+----+----+----+----+----+----+----|
+         ,    ,DBUG,    ,RHUD,RSAD,RVAD,    ,    ,    ,
+  //|----+----+----+----+----+----+----+----+----+----|
+     BL_S,    ,GUIC,    ,    ,    ,    ,    ,    ,    
+  //`----+----+----+----+----+----+----+----+----+----'
+  )
+
+};

keyboards/dilly/keymaps/default/rules.mk

@@ -0,0 +1 @@
+RGBLIGHT_ENABLE = yes

keyboards/dilly/rules.mk

@@ -0,0 +1,56 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes

keyboards/helix/rev1/split_util.h

@@ -2,11 +2,7 @@
 #define SPLIT_KEYBOARD_UTIL_H
 
 #include <stdbool.h>
-
-#ifdef EE_HANDS
-	#define EECONFIG_BOOTMAGIC_END      (uint8_t *)10
-	#define EECONFIG_HANDEDNESS         EECONFIG_BOOTMAGIC_END
-#endif
+#include "eeconfig.h"
 
 #define SLAVE_I2C_ADDRESS           0x32
 

keyboards/helix/rev2/split_util.h

@@ -2,11 +2,7 @@
 #define SPLIT_KEYBOARD_UTIL_H
 
 #include <stdbool.h>
-
-#ifdef EE_HANDS
-	#define EECONFIG_BOOTMAGIC_END      (uint8_t *)10
-	#define EECONFIG_HANDEDNESS         EECONFIG_BOOTMAGIC_END
-#endif
+#include "eeconfig.h"
 
 #define SLAVE_I2C_ADDRESS           0x32
 

keyboards/iris/info.json

@@ -0,0 +1,16 @@
+{
+    "keyboard_name": "Iris", 
+    "manufacturer": "Keebio", 
+    "identifier": "0x1256", 
+    "url": "Keeb.io", 
+    "maintainer": "qmk", 
+    "processor": "atmega32u4", 
+    "bootloader": "", 
+    "width": 14.5, 
+    "height": 5, 
+    "layouts": {
+        "KEYMAP": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":8.5, "y":2}, {"x":9.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7.5, "y":3}, {"x":8.5, "y":3}, {"x":9.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}, {"x":12.5, "y":3}, {"x":13.5, "y":3}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":7.5, "y":4}, {"x":8.5, "y":4}, {"x":9.5, "y":4}]
+        }
+    }
+}

keyboards/iris/keymaps/yanfali/config.h

@@ -0,0 +1,43 @@
+/*
+Copyright 2017 Danny Nguyen <danny@hexwire.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "config_common.h"
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#define TAPPING_TERM 150
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 12
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
+#endif

keyboards/iris/keymaps/yanfali/keymap.c

@@ -0,0 +1,145 @@
+#include "iris.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+#define KC_ KC_TRNS
+#define _______ KC_TRNS
+
+#define KC_CAPW LGUI(LSFT(KC_3))        // Capture whole screen
+#define KC_CPYW LGUI(LSFT(LCTL(KC_3)))  // Copy whole screen
+#define KC_CAPP LGUI(LSFT(KC_4))        // Capture portion of screen
+#define KC_CPYP LGUI(LSFT(LCTL(KC_4)))  // Copy portion of screen
+#define KC_ESCC MT(MOD_LCTL, KC_ESC)    // Control (hold), Escape (tap)
+#define KC_BACK LGUI(KC_LEFT)           // Browser Back
+#define KC_FORW LGUI(KC_RIGHT)          // Browser Forward
+#define KC_LOWR LOWER
+#define KC_RASE RAISE
+#define KC_RST RESET
+#define KC_BL_S BL_STEP
+#define KC_ENTS MT(MOD_LSFT, KC_ENT)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = KC_KEYMAP(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+     GRV , 1  , 2  , 3  , 4  , 5  ,                6  , 7  , 8  , 9  , 0  ,MINS,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     TAB , Q  , W  , E  , R  , T  ,                Y  , U  , I  , O  , P  ,PLUS,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     ESCC, A  , S  , D  , F  , G  ,                H  , J  , K  , L  ,SCLN,QUOT,
+  //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
+     LSFT, Z  , X  , C  , V  , B  ,SPC ,     LALT, N  , M  ,COMM,DOT ,SLSH,DEL ,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                       LGUI,LOWR,SPC ,         BSPC,ENTS,RASE
+  //                  `----+----+----'        `----+----+----'
+  ),
+
+  [_LOWER] = KC_KEYMAP(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+     TILD,EXLM, AT ,HASH,DLR ,PERC,               CIRC,AMPR,ASTR,LPRN,RPRN,BSPC,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     RST , 1  , 2  , 3  , 4  , 5  ,                6  , 7  , 8  , 9  , 0  ,    ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     DEL ,CAPP,LEFT,RGHT, UP ,LBRC,               RBRC, P4 , P5 , P6 ,PLUS,PIPE,
+  //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
+     BL_S,CPYP,    ,    ,DOWN,LCBR,LPRN,     RPRN,RCBR, P1 , P2 , P3 ,MINS,    ,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                           ,    ,DEL ,         DEL ,    , P0
+  //                  `----+----+----'        `----+----+----'
+  ),
+
+  [_RAISE] = KC_KEYMAP(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+     F12 , F1 , F2 , F3 , F4 , F5 ,                F6 , F7 , F8 , F9 ,F10 ,F11 ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+         ,EXLM, AT ,HASH,DLR ,PERC,               CIRC,AMPR,ASTR,LPRN,RPRN,    ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     DEL ,MPRV,BACK,FORW,PGUP,UNDS,               EQL ,HOME,    ,    ,    ,BSLS,
+  //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
+     MUTE,MSTP,MPLY,VOLD,PGDN,MINS,    ,         ,PLUS,END ,    ,    ,    ,    ,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                           ,    ,    ,             ,    ,
+  //                  `----+----+----'        `----+----+----'
+  ),
+
+  [_ADJUST] = KEYMAP(
+  //,--------+--------+--------+--------+--------+--------.                          ,--------+--------+--------+--------+--------+--------.
+      _______, _______, _______, _______, _______, _______,                            _______, _______, _______, _______, _______, _______,
+  //|--------+--------+--------+--------+--------+--------|                          |--------+--------+--------+--------+--------+--------|
+      RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, _______,                            _______, _______, _______, _______, _______, _______,
+  //|--------+--------+--------+--------+--------+--------|                          |--------+--------+--------+--------+--------+--------|
+      RESET  , DEBUG  , RGB_HUD, RGB_SAD, RGB_VAD, _______,                            _______, _______, _______, _______, _______, _______,
+  //|--------+--------+--------+--------+--------+--------+--------.        ,--------|--------+--------+--------+--------+--------+--------|
+      _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______, _______,
+  //`--------+--------+--------+----+---+--------+--------+--------/        \--------+--------+--------+---+----+--------+--------+--------'
+                                      _______, _______, _______,                  _______, _______, _______
+  //                                `--------+--------+--------'                `--------+--------+--------'
+  )
+
+};
+
+#ifdef AUDIO_ENABLE
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+#endif
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(tone_qwerty);
+        #endif
+        persistent_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}

keyboards/iris/keymaps/yanfali/readme.md

@@ -0,0 +1,17 @@
+## u/yanfali keymap for Iris
+
+Based heavily off Hexwire's configuration. Differs in following ways:
+
+ 1. Moved LALT to LCTL; I don't need CTL because of ESCC.
+ 1. Moved RAISE to old LALT.
+ 1. Moved ENTER to old RAISE.
+ 1. Move QUOTE to old ENTER.
+ 1. Moved PLUS to old QUOTE.
+ 1. replaced music next and volume up with browser forward and back
+    through history
+
+This configuration lets me use my thumbs for enter and backspace.
+It turns out I need `+` a lot for programming so I moved it logically
+below `-`.  I also added a couple of web specific short cuts for
+navigating previous and next in web history on OSX Chrome.
+

keyboards/iris/keymaps/yanfali/rules.mk

@@ -1,4 +1,5 @@
 RGBLIGHT_ENABLE = yes
+BACKLIGHT_ENABLE = yes
 
 ifndef QUANTUM_DIR
 	include ../../../../Makefile

keyboards/jc65/readme.md

@@ -1,7 +1,8 @@
 JC65
 ===
 
-![JC65](https://imgur.com/a/C2oa5)
+![JC65 with 32u4](https://i.imgur.com/I4hCyBI.jpg)
+![JC65 with 32a](https://i.imgur.com/9cJ9UbX.jpg)
 
 The JC65 PCB actually has two revisions: A QMK native version, and a PS2AVRGB version. Jchan offered both PCBs as options during the M65-A Round 1 group buy and are now currently available on [keyclack.com](https://keyclack.com/)
 

keyboards/jc65/v32a/keymaps/naut/keymap.c

@@ -9,11 +9,14 @@
 // Define Macros
 #define M_PRTS  M(0)
 #define M_PRTA  M(1)
-#define M_MSSN  M(2)
-#define M_APPS  M(3)
-#define M_SPOT  M(4)
-#define M_LEFT  M(5)
-#define M_RGHT  M(6)
+#define M_PRTSC M(2)
+#define M_PRTAC M(3)
+#define M_MSSN  M(4)
+#define M_APPS  M(5)
+#define M_SPOT  M(6)
+#define M_LEFT  M(7)
+#define M_RGHT  M(8)
+#define RGB_WHT M(9)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     // Base Layer
@@ -35,15 +38,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     // Mac Layer
     [_MAC] = KEYMAP(
           TO(0), KC_F14, KC_F15, M_APPS, M_MSSN, KC_F11, KC_F12,KC_MRWD,KC_MPLY,KC_MFFD,KC_MUTE,KC_VOLD,KC_VOLU,KC_EJCT,  KC_NO,  KC_NO,
-        KC_TRNS, M_PRTS, M_PRTA,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,        KC_TRNS,KC_TRNS,
-        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,        KC_TRNS,KC_TRNS,
-        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,          TO(0), M_MSSN,KC_TRNS,
-        KC_TRNS,KC_TRNS,KC_TRNS,         M_SPOT, M_SPOT, M_SPOT,                        KC_TRNS,KC_TRNS,KC_TRNS, M_LEFT, M_APPS, M_RGHT
+          KC_NO, M_PRTS, M_PRTA,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,        KC_BSPC,  KC_NO,
+          KC_NO,M_PRTSC,M_PRTAC,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,         KC_ENT,  KC_NO,
+          KC_NO,  KC_NO,  KC_NO,   KC_X,   KC_C,   KC_V,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,          TO(0), M_MSSN,  KC_NO,
+          KC_NO,  KC_NO,KC_LGUI,         M_SPOT, M_SPOT, M_SPOT,                        KC_RGUI,  KC_NO,  KC_NO, M_LEFT, M_APPS, M_RGHT
     ),
     // RGB and BL Layer
     [_RGB] = KEYMAP(
           TO(0),  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  TO(0),
-          KC_NO,RGB_HUD,RGB_HUI,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,          KC_NO,BL_TOGG,
+          KC_NO,RGB_HUD,RGB_HUI,RGB_WHT,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,          KC_NO,BL_TOGG,
           KC_NO,RGB_SAD,RGB_SAI,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,          KC_NO,RGB_TOG,
           KC_NO,  KC_NO,RGB_VAD,RGB_VAI,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,RGB_MOD,RGB_RMOD,         KC_NO,RGB_M_P,RGB_M_R,
           KC_NO,  KC_NO,  KC_NO,          KC_NO,  KC_NO,  KC_NO,                          KC_NO,  KC_NO,  KC_NO,  KC_NO,RGB_M_G,RGB_M_SW
@@ -55,25 +58,25 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
     if (record->event.pressed) {
         switch(id) {
             case 0:
-                return MACRO(D(LGUI), D(LSFT), T(3), U(LSFT), U(LGUI), END); //Mac print screen
-                break;
+                return MACRO(D(LGUI), D(LSFT), T(3), U(LSFT), U(LGUI), END);                   // Mac print screen
             case 1:
-                return MACRO(D(LGUI), D(LSFT), T(4), U(LSFT), U(LGUI), END); //Mac print area
-                break;
+                return MACRO(D(LGUI), D(LSFT), T(4), U(LSFT), U(LGUI), END);                   // Mac print area
             case 2:
-                return MACRO(D(LCTL), T(UP), U(LCTL), END);                  //Mac mission control
-                break;
+                return MACRO(D(LCTL), D(LSFT), D(LGUI), T(3), D(LCTL), D(LSFT), D(LGUI), END); // Mac print screen to clipboard
             case 3:
-                return MACRO(D(LCTL), T(DOWN), U(LCTL), END);                //Mac applications
-                break;
+                return MACRO(D(LCTL), D(LSFT), D(LGUI), T(4), D(LCTL), D(LSFT), D(LGUI), END); // Mac print area to clipboard
             case 4:
-                return MACRO(D(LGUI), T(SPC), U(LGUI), END);                 //Mac spotlight search
-                break;
+                return MACRO(D(LCTL), T(UP), U(LCTL), END);                                    // Mac mission control
             case 5:
-                return MACRO(D(LCTL), T(LEFT), U(LCTL), END);                //Mac mission left
-                break;
+                return MACRO(D(LCTL), T(DOWN), U(LCTL), END);                                  // Mac app windows
             case 6:
-                return MACRO(D(LGUI), T(RGHT), U(LGUI), END);                //Mac mission right
+                return MACRO(D(LGUI), T(SPC), U(LGUI), END);                                   // Mac spotlight search
+            case 7:
+                return MACRO(D(LCTL), T(LEFT), U(LCTL), END);                                  // Mac mission left
+            case 8:
+                return MACRO(D(LCTL), T(RGHT), U(LCTL), END);                                  // Mac mission right
+            case 9:
+                rgblight_setrgb(0xff, 0xff, 0xff);                                             // White rgb shortcut
                 break;
         }
     }

keyboards/jc65/v32a/readme.md

@@ -1,6 +1,8 @@
 JC65 ps2avrGB
 =======
 
+![JC65](https://i.imgur.com/9cJ9UbX.jpg)
+
 A 65% keyboard with RGB
 
 Keyboard Maintainer: [Jason Barnachea](https://github.com/nautxx)

keyboards/jc65/v32u4/keymaps/naut/keymap.c

@@ -0,0 +1,93 @@
+#include "v32u4.h"
+
+// Define Layers
+#define _BASE 0
+#define _FNX  1
+#define _MAC  2
+#define _RGB  3
+#define _OFF  4
+
+// Define Macros
+#define M_PRTS  M(0)
+#define M_PRTA  M(1)
+#define M_PRTSC M(2)
+#define M_PRTAC M(3)
+#define M_MSSN  M(4)
+#define M_APPS  M(5)
+#define M_SPOT  M(6)
+#define M_LEFT  M(7)
+#define M_RGHT  M(8)
+#define RGB_WHT M(9)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    // Base Layer
+    [_BASE] = KEYMAP(
+         KC_ESC,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,KC_BSLS, KC_GRV, KC_INS,
+         KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC,KC_RBRC,        KC_BSPC, KC_DEL,
+        KC_LCTL,   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,KC_SCLN,KC_QUOT,                 KC_ENT,KC_PGUP,
+        KC_LSFT,  KC_NO,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,KC_COMM, KC_DOT,KC_SLSH,        KC_RSFT,  KC_UP,KC_PGDN,
+          MO(1),KC_LALT,KC_LGUI,         KC_SPC, KC_SPC, KC_SPC,                        KC_RGUI,  KC_NO,KC_RALT,KC_LEFT,KC_DOWN,KC_RGHT
+    ),
+    // Fn Layer
+    [_FNX] = KEYMAP(
+        KC_TRNS,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9, KC_F10, KC_F11, KC_F12,KC_TRNS,  TG(4),  TG(3),
+        KC_CAPS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,        KC_TRNS,KC_TRNS,
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,                KC_TRNS,KC_TRNS,
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,          TG(2),KC_VOLU,KC_MPLY,
+        KC_TRNS,KC_TRNS,KC_TRNS,        KC_TRNS,KC_TRNS,KC_TRNS,                        KC_TRNS,KC_TRNS,KC_TRNS,KC_MRWD,KC_VOLD,KC_MFFD
+    ),
+    // Mac Layer
+    [_MAC] = KEYMAP(
+          TO(0), KC_F14, KC_F15, M_APPS, M_MSSN, KC_F11, KC_F12,KC_MRWD,KC_MPLY,KC_MFFD,KC_MUTE,KC_VOLD,KC_VOLU,KC_EJCT,  KC_NO,  KC_NO,
+          KC_NO, M_PRTS, M_PRTA,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,        KC_BSPC,  KC_NO,
+          KC_NO,M_PRTSC,M_PRTAC,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,                 KC_ENT,  KC_NO,
+          KC_NO,  KC_NO,  KC_NO,   KC_X,   KC_C,   KC_V,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,          TO(0), M_MSSN,  KC_NO,
+          KC_NO,  KC_NO,KC_LGUI,         M_SPOT, M_SPOT, M_SPOT,                        KC_RGUI,  KC_NO,  KC_NO, M_LEFT, M_APPS, M_RGHT
+    ),
+    // RGB and BL Layer
+    [_RGB] = KEYMAP(
+          TO(0),  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  TO(0),
+          KC_NO,RGB_HUD,RGB_HUI,RGB_WHT,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,          KC_NO,BL_TOGG,
+          KC_NO,RGB_SAD,RGB_SAI,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,                  KC_NO,RGB_TOG,
+          KC_NO,  KC_NO,RGB_VAD,RGB_VAI, BL_DEC, BL_INC,  KC_NO,  KC_NO,  KC_NO,  KC_NO,RGB_MOD,RGB_RMOD,         KC_NO,RGB_M_P,RGB_M_R,
+          KC_NO,  KC_NO,  KC_NO,          KC_NO,  KC_NO,  KC_NO,                          KC_NO,  KC_NO,  KC_NO,  KC_NO,RGB_M_G,RGB_M_SW
+    ),
+    // Mash Layer
+    [_OFF] = KEYMAP(
+          TO(0),  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,
+          KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,          KC_NO,  KC_NO,
+          KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,                  KC_NO,  KC_NO,
+          KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,          KC_NO,  KC_NO,  KC_NO,
+          RESET,  KC_NO,  KC_NO,          KC_NO,  KC_NO,  KC_NO,                          KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO
+    ),
+};
+
+// The Macros
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+    if (record->event.pressed) {
+        switch(id) {
+            case 0:
+                return MACRO(D(LGUI), D(LSFT), T(3), U(LSFT), U(LGUI), END);                   // Mac print screen
+            case 1:
+                return MACRO(D(LGUI), D(LSFT), T(4), U(LSFT), U(LGUI), END);                   // Mac print area
+            case 2:
+                return MACRO(D(LCTL), D(LSFT), D(LGUI), T(3), D(LCTL), D(LSFT), D(LGUI), END); // Mac print screen to clipboard
+            case 3:
+                return MACRO(D(LCTL), D(LSFT), D(LGUI), T(4), D(LCTL), D(LSFT), D(LGUI), END); // Mac print area to clipboard
+            case 4:
+                return MACRO(D(LCTL), T(UP), U(LCTL), END);                                    // Mac mission control
+            case 5:
+                return MACRO(D(LCTL), T(DOWN), U(LCTL), END);                                  // Mac app windows
+            case 6:
+                return MACRO(D(LGUI), T(SPC), U(LGUI), END);                                   // Mac spotlight search
+            case 7:
+                return MACRO(D(LCTL), T(LEFT), U(LCTL), END);                                  // Mac mission left
+            case 8:
+                return MACRO(D(LCTL), T(RGHT), U(LCTL), END);                                  // Mac mission right
+            case 9:
+                rgblight_setrgb(0xff, 0xff, 0xff);                                             // White rgb shortcut
+                break;
+        }
+    }
+    return MACRO_NONE;
+};

keyboards/jc65/v32u4/keymaps/naut/readme.md

@@ -0,0 +1,18 @@
+Naut's Keymap
+=======
+ 
+Layer 1: HHKB Split backspace, 6.25u space, control on caps, Fn on L-Ctl.
+
+Layer 2: F Row on numrow, caps on tab, media shortcuts on arrows
+
+Layer 3: Mac Media buttons on numrow
+
+Layer 4: RGB control
+
+Layer 5: Keyboard off (for mashing purposes and reset)
+
+Keymap Maintainer: [Jason Barnachea](https://github.com/nautxx)
+
+Difference from base layout: HHKBish layout. HHKB Fn layer. Mac media layer. RGB control layer. Button mashing layer.
+
+Intended usage: Daily driver for keyboard peacocking. 

keyboards/jc65/v32u4/keymaps/naut/rules.mk

@@ -0,0 +1,2 @@
+RGBLIGHT_ENABLE = yes
+BACKLIGHT_ENABLE = yes

keyboards/jc65/v32u4/readme.md

@@ -1,7 +1,7 @@
 JC65
 ===
 
-![JC65](https://imgur.com/a/C2oa5)
+![JC65](https://i.imgur.com/I4hCyBI.jpg)
 
 The JC65 PCB actually has two revisions: A QMK native version, and a PS2AVRGB version. Jchan offered both PCBs as options during the M65-A Round 1 group buy, and were also available choices for the 65% acrylic case group buy. In the near future both PCB versions should be available from keyclack.com when the storefront part opens.
 

keyboards/lets_split/keymaps/default/keymap.c

@@ -45,7 +45,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
   KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
   KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
-  KC_LCTRL,KC_LGUI,  KC_LALT, ADJUST,  LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+  KC_LCTRL,KC_LGUI, KC_LALT, ADJUST,  LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
 ),
 
 /* Colemak
@@ -88,9 +88,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * ,-----------------------------------------------------------------------------------.
  * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
  * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |      |   \  |  |   |
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
  * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      |      |Enter |
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      |      |      |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
  * `-----------------------------------------------------------------------------------'
@@ -108,7 +108,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |------+------+------+------+------+-------------+------+------+------+------+------|
  * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
  * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |      |      |Enter |
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |      |      |      |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
  * `-----------------------------------------------------------------------------------'

keyboards/lets_split/keymaps/hexwire/config.h

@@ -1,26 +0,0 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-/* Use I2C or Serial, not both */
-
-#define USE_SERIAL
-// #define USE_I2C
-
-/* Select hand configuration */
-
-#define MASTER_LEFT
-// #define MASTER_RIGHT
-// #define EE_HANDS
-
-#define TAPPING_TERM 150
-
-#undef RGBLED_NUM
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 8
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-
-#endif

keyboards/lets_split/keymaps/hexwire/rules.mk

@@ -1,5 +0,0 @@
-RGBLIGHT_ENABLE = yes
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/levinson/keymaps/hexwire/README.md

@@ -1,108 +0,0 @@
-Hexwire's Let's Split Layout
-============================
-
-### Changes from default layout
-
-- Main layer
-    - The right space bar key has been changed to backspace, as I only hit space with my left thumb
-    - Backtick is at the lower right and also serves goes to the 3rd function layer when held
-    - Enter key acts as shift when held
-    - Escape key acts as control when held
-    - Minus key at upper right
-- Lower layer
-    - Numbers are on the lower layer, to make it easier to use a numpad on the right hand
-    - Arrow keys
-    - Straight and curly brackets in the middle two columns
-    - Screenshot keys for MacOS
-- Upper layer
-    - Symbols are on the upper layer
-    - Media keys
-    - Page Up/Down, Home/End
-- 3rd function layer
-    - Function keys
-
-## Layouts
-
-### Qwerty
-
-```
-,----+----+----+----+----+----.    ,----+----+----+----+----+----.
- TAB , Q  , W  , E  , R  , T  ,      Y  , U  , I  , O  , P  ,MINS,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
-  X0 , A  , S  , D  , F  , G  ,      H  , J  , K  , L  ,SCLN,QUOT,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
- LSFT, Z  , X  , C  , V  , B  ,      N  , M  ,COMM,DOT ,SLSH, X4 ,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
-  X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT
-`----+----+----+----+----+----'    `----+----+----+----+----+----'
-```
-
-### Colemak
-
-```
-,----+----+----+----+----+----.    ,----+----+----+----+----+----.
- TAB , Q  , W  , F  , P  , G  ,      J  , L  , U  , Y  ,SCLN,MINS,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
-  X0 , A  , R  , S  , T  , D  ,      H  , N  , E  , I  , O  ,QUOT,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
- LSFT, Z  , X  , C  , V  , B  ,      K  , M  ,COMM,DOT ,SLSH, X4 ,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
-  X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT
-`----+----+----+----+----+----'    `----+----+----+----+----+----'
-```
-
-### Dvorak
-
-```
-,----+----+----+----+----+----.    ,----+----+----+----+----+----.
- TAB ,QUOT,COMM,DOT , P  , Y  ,      F  , G  , C  , R  , L  ,MINS,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
-  X0 , A  , O  , E  , U  , I  ,      D  , H  , R  , N  , S  ,SLSH,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
- LSFT,SCLN, Q  , J  , K  , X  ,      B  , M  , W  , V  , Z  , X4 ,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
-  X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT
-`----+----+----+----+----+----'    `----+----+----+----+----+----'
-```
-
-### Lower
-
-```
-,----+----+----+----+----+----.    ,----+----+----+----+----+----.
-     , 1  , 2  , 3  , 4  , 5  ,      6  , 7  , 8  , 9  , 0  ,    ,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
- DEL ,CAPP,LEFT,RGHT, UP ,LBRC,     RBRC, P4 , P5 , P6 ,PLUS,PIPE,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     ,CPYP,    ,    ,DOWN,LCBR,     RCBR, P1 , P2 , P3 ,MINS,    ,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     ,    ,    ,    ,    ,    ,     DEL ,    , P0 ,PDOT,    ,
-`----+----+----+----+----+----'    `----+----+----+----+----+----'
-```
-
-### Raise
-
-```
-,----+----+----+----+----+----.    ,----+----+----+----+----+----.
-     ,EXLM, AT ,HASH,DLR ,PERC,     CIRC,AMPR,ASTR,LPRN,RPRN,    ,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
- DEL ,MPRV,MNXT,VOLU,PGUP,UNDS,     EQL ,HOME,    ,    ,    ,BSLS,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
- MUTE,MSTP,MPLY,VOLD,PGDN,MINS,     PLUS,END ,    ,    ,    ,    ,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    
-`----+----+----+----+----+----'    `----+----+----+----+----+----'
-```
-
-### 3rd function layer
-
-```
-,----+----+----+----+----+----.    ,----+----+----+----+----+----.
- F12 , F1 , F2 , F3 , F4 , F5 ,      F6 , F7 , F8 , F9 ,F10 ,F11 ,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    ,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    ,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,   
-`----+----+----+----+----+----'    `----+----+----+----+----+----'
-```

keyboards/levinson/keymaps/hexwire/keymap.c

@@ -1,206 +0,0 @@
-#include "levinson.h"
-#include "action_layer.h"
-#include "eeconfig.h"
-
-extern keymap_config_t keymap_config;
-
-#define _QWERTY 0
-#define _COLEMAK 1
-#define _DVORAK 2
-#define _LOWER 3
-#define _RAISE 4
-#define _FN3 5
-#define _FN4 6
-#define _ADJUST 16
-
-enum custom_keycodes {
-  QWERTY = SAFE_RANGE,
-  COLEMAK,
-  DVORAK,
-  LOWER,
-  RAISE,
-  FN3,
-  FN4,
-  ADJUST,
-};
-
-#define KC_ KC_TRNS
-#define _______ KC_TRNS
-
-#define KC_CAPW LGUI(LSFT(KC_3))        // Capture whole screen
-#define KC_CPYW LGUI(LSFT(LCTL(KC_3)))  // Copy whole screen
-#define KC_CAPP LGUI(LSFT(KC_4))        // Capture portion of screen
-#define KC_CPYP LGUI(LSFT(LCTL(KC_4)))  // Copy portion of screen
-#define KC_X0 MT(MOD_LCTL, KC_ESC)
-#define KC_X1 LOWER
-#define KC_X2 RAISE
-#define KC_X3 LT(_FN3, KC_GRV)
-#define KC_X4 MT(MOD_LSFT, KC_ENT)
-#define KC_X5 BL_STEP
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-  [_QWERTY] = KC_KEYMAP(
-  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
-     TAB , Q  , W  , E  , R  , T  ,      Y  , U  , I  , O  , P  ,MINS,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-      X0 , A  , S  , D  , F  , G  ,      H  , J  , K  , L  ,SCLN,QUOT,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     LSFT, Z  , X  , C  , V  , B  ,      N  , M  ,COMM,DOT ,SLSH, X4 ,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-      X5 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT
-  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
-  ),
-
-  [_COLEMAK] = KC_KEYMAP(
-  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
-     TAB , Q  , W  , F  , P  , G  ,      J  , L  , U  , Y  ,SCLN,MINS,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-      X0 , A  , R  , S  , T  , D  ,      H  , N  , E  , I  , O  ,QUOT,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     LSFT, Z  , X  , C  , V  , B  ,      K  , M  ,COMM,DOT ,SLSH, X4 ,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-      X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT
-  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
-  ),
-
-  [_DVORAK] = KC_KEYMAP(
-  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
-     TAB ,QUOT,COMM,DOT , P  , Y  ,      F  , G  , C  , R  , L  ,MINS,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-      X0 , A  , O  , E  , U  , I  ,      D  , H  , T  , N  , S  ,SLSH,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     LSFT,SCLN, Q  , J  , K  , X  ,      B  , M  , W  , V  , Z  , X4 ,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-      X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT
-  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
-  ),
-
-  [_LOWER] = KC_KEYMAP(
-  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
-         , 1  , 2  , 3  , 4  , 5  ,      6  , 7  , 8  , 9  , 0  ,    ,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     DEL ,CAPP,LEFT,RGHT, UP ,LBRC,     RBRC, P4 , P5 , P6 ,PLUS,PIPE,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-         ,CPYP,    ,    ,DOWN,LCBR,     RCBR, P1 , P2 , P3 ,MINS,    ,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    ,     DEL ,    , P0 ,PDOT,    ,
-  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
-  ),
-
-  [_RAISE] = KC_KEYMAP(
-  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
-         ,EXLM, AT ,HASH,DLR ,PERC,     CIRC,AMPR,ASTR,LPRN,RPRN,    ,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     DEL ,MPRV,MNXT,VOLU,PGUP,UNDS,     EQL ,HOME,    ,    ,    ,BSLS,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     MUTE,MSTP,MPLY,VOLD,PGDN,MINS,     PLUS,END ,    ,    ,    ,    ,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,
-  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
-  ),
-
-  [_FN3] = KC_KEYMAP(
-  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
-     F12 , F1 , F2 , F3 , F4 , F5 ,      F6 , F7 , F8 , F9 ,F10 ,F11 ,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    ,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    ,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,
-  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
-  ),
-
-/* Adjust (Lower + Raise)
- * ,-----------------------------------------------------------------------------------.
- * |      | Reset|RGB Tg|RGB Md|Hue Up|Hue Dn|Sat Up|Sat Dn|Val Up|Val Dn|      |      |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|      |      |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      |      |      |      |      |
- * `-----------------------------------------------------------------------------------'
- */
-  [_ADJUST] = KEYMAP( \
-    _______, RESET  , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, _______, \
-    _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______, \
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
-  )
-
-
-};
-
-#ifdef AUDIO_ENABLE
-float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
-float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
-float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
-#endif
-
-void persistent_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case QWERTY:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_SONG(tone_qwerty);
-        #endif
-        persistent_default_layer_set(1UL<<_QWERTY);
-      }
-      return false;
-      break;
-    case COLEMAK:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_SONG(tone_colemak);
-        #endif
-        persistent_default_layer_set(1UL<<_COLEMAK);
-      }
-      return false;
-      break;
-    case DVORAK:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_SONG(tone_dvorak);
-        #endif
-        persistent_default_layer_set(1UL<<_DVORAK);
-      }
-      return false;
-      break;
-    case LOWER:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case RAISE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case ADJUST:
-      if (record->event.pressed) {
-        layer_on(_ADJUST);
-      } else {
-        layer_off(_ADJUST);
-      }
-      return false;
-      break;
-  }
-  return true;
-}

keyboards/nyquist/keymaps/pitty/keymap.c

@@ -131,3 +131,45 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
     return MACRO_NONE;
 }
 
+#ifdef RGBLIGHT_ENABLE
+bool rgb_layer_change = true;
+#endif
+
+#define rgblight_set_blue        rgblight_sethsv (0xFF,  0xFF, 0xFF);
+#define rgblight_set_red         rgblight_sethsv (0x00,  0xFF, 0xFF);
+#define rgblight_set_green       rgblight_sethsv (0x78,  0xFF, 0xFF);
+#define rgblight_set_orange      rgblight_sethsv (0x1E,  0xFF, 0xFF);
+#define rgblight_set_teal        rgblight_sethsv (0xC3,  0xFF, 0xFF);
+#define rgblight_set_magenta     rgblight_sethsv (0x12C, 0xFF, 0xFF);
+#define rgblight_set_yellow      rgblight_sethsv (0x3C,  0xFF, 0xFF);
+#define rgblight_set_purple      rgblight_sethsv (0x10E, 0xFF, 0xFF);
+#define rgblight_set_white       rgblight_sethsv (0x00,  0x00, 0xFF);
+#define rgblight_set_black       rgblight_sethsv (0x00,  0x00, 0x00);
+
+uint32_t layer_state_set_user(uint32_t state) {
+#ifdef RGBLIGHT_ENABLE
+  uint8_t default_layer = eeconfig_read_default_layer();
+  if (rgb_layer_change) {
+    switch (biton32(state)) {
+    case _LOWER:
+      rgblight_set_purple;
+      rgblight_mode(5);
+      break;
+    case _VIM:
+	  rgblight_set_green;
+      rgblight_mode(23);
+      break;
+	case _GAME:
+      rgblight_mode(8);
+      break;
+    default:
+      if (default_layer & (1UL << _GAME)) {
+      }
+      else 
+      rgblight_mode(14);
+      break;
+    }
+  }
+#endif
+  return state;
+}

keyboards/nyquist/split_util.h

@@ -2,11 +2,7 @@
 #define SPLIT_KEYBOARD_UTIL_H
 
 #include <stdbool.h>
-
-#ifdef EE_HANDS
-	#define EECONFIG_BOOTMAGIC_END      (uint8_t *)10
-	#define EECONFIG_HANDEDNESS         EECONFIG_BOOTMAGIC_END
-#endif
+#include "eeconfig.h"
 
 #define SLAVE_I2C_ADDRESS           0x32
 

keyboards/orthodox/split_util.h

@@ -2,11 +2,8 @@
 #define SPLIT_KEYBOARD_UTIL_H
 
 #include <stdbool.h>
+#include "eeconfig.h"
 
-#ifdef EE_HANDS
-	#define EECONFIG_BOOTMAGIC_END      (uint8_t *)10
-	#define EECONFIG_HANDEDNESS         EECONFIG_BOOTMAGIC_END
-#endif
 
 #define SLAVE_I2C_ADDRESS           0x32
 

keyboards/planck/planck.h

@@ -29,7 +29,22 @@
 	{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \
 }
 
+// Used to create a keymap using only KC_ prefixed keys
+#define KC_KEYMAP( \
+	k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+	k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \
+	) \
+	LAYOUT_planck_grid( \
+		KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_##k06, KC_##k07, KC_##k08, KC_##k09, KC_##k0a, KC_##k0b, \
+		KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15, KC_##k16, KC_##k17, KC_##k18, KC_##k19, KC_##k1a, KC_##k1b, \
+		KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_##k26, KC_##k27, KC_##k28, KC_##k29, KC_##k2a, KC_##k2b, \
+		KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35, KC_##k36, KC_##k37, KC_##k38, KC_##k39, KC_##k3a, KC_##k3b \
+    )
+
 #define KEYMAP LAYOUT_planck_grid
 #define LAYOUT_ortho_4x12 LAYOUT_planck_grid
+#define KC_LAYOUT_ortho_4x12 KC_KEYMAP
 
 #endif

keyboards/viterbi/split_util.h

@@ -2,11 +2,8 @@
 #define SPLIT_KEYBOARD_UTIL_H
 
 #include <stdbool.h>
+#include "eeconfig.h"
 
-#ifdef EE_HANDS
-	#define EECONFIG_BOOTMAGIC_END      (uint8_t *)10
-	#define EECONFIG_HANDEDNESS         EECONFIG_BOOTMAGIC_END
-#endif
 
 #define SLAVE_I2C_ADDRESS           0x32
 

layouts/community/ortho_4x12/bakingpy/config.h

@@ -1,7 +1,7 @@
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
-#include "../../config.h"
+#include QMK_KEYBOARD_CONFIG_H
 
 /* Use I2C or Serial, not both */
 

layouts/community/ortho_4x12/bakingpy/keymap.c

@@ -1,4 +1,4 @@
-#include "lets_split.h"
+#include QMK_KEYBOARD_H
 #include "action_layer.h"
 #include "eeconfig.h"
 
@@ -9,8 +9,7 @@ extern keymap_config_t keymap_config;
 #define _DVORAK 2
 #define _LOWER 3
 #define _RAISE 4
-#define _FN3 5
-#define _FN4 6
+#define _FKEYS 5
 #define _ADJUST 16
 
 enum custom_keycodes {
@@ -19,8 +18,6 @@ enum custom_keycodes {
   DVORAK,
   LOWER,
   RAISE,
-  FN3,
-  FN4,
   ADJUST,
 };
 
@@ -31,51 +28,52 @@ enum custom_keycodes {
 #define KC_CPYW LGUI(LSFT(LCTL(KC_3)))  // Copy whole screen
 #define KC_CAPP LGUI(LSFT(KC_4))        // Capture portion of screen
 #define KC_CPYP LGUI(LSFT(LCTL(KC_4)))  // Copy portion of screen
-#define KC_X0 MT(MOD_LCTL, KC_ESC)
-#define KC_X1 LOWER
-#define KC_X2 RAISE
-#define KC_X3 LT(_FN3, KC_GRV)
-#define KC_X4 MT(MOD_LSFT, KC_ENT)
+#define KC_ESCC MT(MOD_LCTL, KC_ESC)
+#define KC_LOWR LOWER
+#define KC_RASE RAISE
+#define KC_GRVF LT(_FKEYS, KC_GRV)
+#define KC_ENTS MT(MOD_LSFT, KC_ENT)
+#define KC_BL_S BL_STEP
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-  [_QWERTY] = KC_KEYMAP(
+  [_QWERTY] = KC_LAYOUT_ortho_4x12(
   //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
      TAB , Q  , W  , E  , R  , T  ,      Y  , U  , I  , O  , P  ,MINS,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-      X0 , A  , S  , D  , F  , G  ,      H  , J  , K  , L  ,SCLN,QUOT,
+     ESCC, A  , S  , D  , F  , G  ,      H  , J  , K  , L  ,SCLN,QUOT,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     LSFT, Z  , X  , C  , V  , B  ,      N  , M  ,COMM,DOT ,SLSH, X4 ,
+     LSFT, Z  , X  , C  , V  , B  ,      N  , M  ,COMM,DOT ,SLSH,ENTS,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-      X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT
+     GRVF,LCTL,LALT,LGUI,LOWR,SPC ,     BSPC,RASE,LEFT,DOWN, UP ,RGHT
   //`----+----+----+----+----+----'    `----+----+----+----+----+----'
   ),
 
-  [_COLEMAK] = KC_KEYMAP(
+  [_COLEMAK] = KC_LAYOUT_ortho_4x12(
   //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
      TAB , Q  , W  , F  , P  , G  ,      J  , L  , U  , Y  ,SCLN,MINS,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-      X0 , A  , R  , S  , T  , D  ,      H  , N  , E  , I  , O  ,QUOT,
+     ESCC, A  , R  , S  , T  , D  ,      H  , N  , E  , I  , O  ,QUOT,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     LSFT, Z  , X  , C  , V  , B  ,      K  , M  ,COMM,DOT ,SLSH, X4 ,
+     LSFT, Z  , X  , C  , V  , B  ,      K  , M  ,COMM,DOT ,SLSH,ENTS,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-      X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT
+     GRVF,LCTL,LALT,LGUI,LOWR,SPC ,     BSPC,RASE,LEFT,DOWN, UP ,RGHT
   //`----+----+----+----+----+----'    `----+----+----+----+----+----'
   ),
 
-  [_DVORAK] = KC_KEYMAP(
+  [_DVORAK] = KC_LAYOUT_ortho_4x12(
   //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
      TAB ,QUOT,COMM,DOT , P  , Y  ,      F  , G  , C  , R  , L  ,MINS,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-      X0 , A  , O  , E  , U  , I  ,      D  , H  , T  , N  , S  ,SLSH,
+     ESCC, A  , O  , E  , U  , I  ,      D  , H  , T  , N  , S  ,SLSH,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     LSFT,SCLN, Q  , J  , K  , X  ,      B  , M  , W  , V  , Z  , X4 ,
+     LSFT,SCLN, Q  , J  , K  , X  ,      B  , M  , W  , V  , Z  ,ENTS,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-      X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT
+     GRVF,LCTL,LALT,LGUI,LOWR,SPC ,     BSPC,RASE,LEFT,DOWN, UP ,RGHT
   //`----+----+----+----+----+----'    `----+----+----+----+----+----'
   ),
 
-  [_LOWER] = KC_KEYMAP(
+  [_LOWER] = KC_LAYOUT_ortho_4x12(
   //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
          , 1  , 2  , 3  , 4  , 5  ,      6  , 7  , 8  , 9  , 0  ,    ,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
@@ -83,11 +81,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
          ,CPYP,    ,    ,DOWN,LCBR,     RCBR, P1 , P2 , P3 ,MINS,    ,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    ,     DEL ,    , P0 ,PDOT,    ,
+     BL_S,    ,    ,    ,    ,DEL ,     DEL ,    , P0 ,PDOT,    ,
   //`----+----+----+----+----+----'    `----+----+----+----+----+----'
   ),
 
-  [_RAISE] = KC_KEYMAP(
+  [_RAISE] = KC_LAYOUT_ortho_4x12(
   //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
          ,EXLM, AT ,HASH,DLR ,PERC,     CIRC,AMPR,ASTR,LPRN,RPRN,    ,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
@@ -99,7 +97,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   //`----+----+----+----+----+----'    `----+----+----+----+----+----'
   ),
 
-  [_FN3] = KC_KEYMAP(
+  [_FKEYS] = KC_LAYOUT_ortho_4x12(
   //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
      F12 , F1 , F2 , F3 , F4 , F5 ,      F6 , F7 , F8 , F9 ,F10 ,F11 ,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
@@ -122,7 +120,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      |      |      |      |      |
  * `-----------------------------------------------------------------------------------'
  */
-  [_ADJUST] = KEYMAP( \
+  [_ADJUST] = LAYOUT_ortho_4x12( \
     _______, RESET  , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, _______, \
     _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______, \
     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \

layouts/community/ortho_4x12/bakingpy/readme.md

@@ -1,4 +1,4 @@
-Hexwire's Let's Split Layout
+Bakingpy's Let's Split Layout
 ============================
 
 ### Changes from default layout
@@ -29,11 +29,11 @@ Hexwire's Let's Split Layout
 ,----+----+----+----+----+----.    ,----+----+----+----+----+----.
  TAB , Q  , W  , E  , R  , T  ,      Y  , U  , I  , O  , P  ,MINS,
 |----+----+----+----+----+----|    |----+----+----+----+----+----|
-  X0 , A  , S  , D  , F  , G  ,      H  , J  , K  , L  ,SCLN,QUOT,
+ ESCC, A  , S  , D  , F  , G  ,      H  , J  , K  , L  ,SCLN,QUOT,
 |----+----+----+----+----+----|    |----+----+----+----+----+----|
- LSFT, Z  , X  , C  , V  , B  ,      N  , M  ,COMM,DOT ,SLSH, X4 ,
+ LSFT, Z  , X  , C  , V  , B  ,      N  , M  ,COMM,DOT ,SLSH,ENTS,
 |----+----+----+----+----+----|    |----+----+----+----+----+----|
-  X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT
+ GRVF,LCTL,LALT,LGUI,LOWR,SPC ,     BSPC,RASE,LEFT,DOWN, UP ,RGHT
 `----+----+----+----+----+----'    `----+----+----+----+----+----'
 ```
 
@@ -43,11 +43,11 @@ Hexwire's Let's Split Layout
 ,----+----+----+----+----+----.    ,----+----+----+----+----+----.
  TAB , Q  , W  , F  , P  , G  ,      J  , L  , U  , Y  ,SCLN,MINS,
 |----+----+----+----+----+----|    |----+----+----+----+----+----|
-  X0 , A  , R  , S  , T  , D  ,      H  , N  , E  , I  , O  ,QUOT,
+ ESCC, A  , R  , S  , T  , D  ,      H  , N  , E  , I  , O  ,QUOT,
 |----+----+----+----+----+----|    |----+----+----+----+----+----|
- LSFT, Z  , X  , C  , V  , B  ,      K  , M  ,COMM,DOT ,SLSH, X4 ,
+ LSFT, Z  , X  , C  , V  , B  ,      K  , M  ,COMM,DOT ,SLSH,ENTS,
 |----+----+----+----+----+----|    |----+----+----+----+----+----|
-  X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT
+ GRVF,LCTL,LALT,LGUI,LOWR,SPC ,     BSPC,RASE,LEFT,DOWN, UP ,RGHT
 `----+----+----+----+----+----'    `----+----+----+----+----+----'
 ```
 
@@ -57,11 +57,11 @@ Hexwire's Let's Split Layout
 ,----+----+----+----+----+----.    ,----+----+----+----+----+----.
  TAB ,QUOT,COMM,DOT , P  , Y  ,      F  , G  , C  , R  , L  ,MINS,
 |----+----+----+----+----+----|    |----+----+----+----+----+----|
-  X0 , A  , O  , E  , U  , I  ,      D  , H  , R  , N  , S  ,SLSH,
+ ESCC, A  , O  , E  , U  , I  ,      D  , H  , R  , N  , S  ,SLSH,
 |----+----+----+----+----+----|    |----+----+----+----+----+----|
- LSFT,SCLN, Q  , J  , K  , X  ,      B  , M  , W  , V  , Z  , X4 ,
+ LSFT,SCLN, Q  , J  , K  , X  ,      B  , M  , W  , V  , Z  ,ENTS,
 |----+----+----+----+----+----|    |----+----+----+----+----+----|
-  X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT
+ GRVF,LCTL,LALT,LGUI,LOWR,SPC ,     BSPC,RASE,LEFT,DOWN, UP ,RGHT
 `----+----+----+----+----+----'    `----+----+----+----+----+----'
 ```
 
@@ -75,7 +75,7 @@ Hexwire's Let's Split Layout
 |----+----+----+----+----+----|    |----+----+----+----+----+----|
      ,CPYP,    ,    ,DOWN,LCBR,     RCBR, P1 , P2 , P3 ,MINS,    ,
 |----+----+----+----+----+----|    |----+----+----+----+----+----|
-     ,    ,    ,    ,    ,    ,     DEL ,    , P0 ,PDOT,    ,
+     ,    ,    ,    ,    ,DEL ,     DEL ,    , P0 ,PDOT,    ,
 `----+----+----+----+----+----'    `----+----+----+----+----+----'
 ```
 

layouts/community/ortho_4x12/bakingpy/rules.mk

@@ -0,0 +1,4 @@
+# Enable RGB if not a Planck
+ifeq (,$(findstring planck,$(KEYBOARD)))
+	RGBLIGHT_ENABLE = yes
+endif