Merge branch 'master' of github.com:qmk/qmk_firmware into handwire

handwire
Jack Humbert 7 years ago
commit 4bdde668e1

@ -1,40 +1,25 @@
# Frequently Asked Build Questions
This page covers questions about building QMK. If you have not yet you should read the [Build Environment Setup](getting_started_build_tools.md) and [Make Instructions](getting_started_make_guide.md) guides.
This page covers questions about building QMK. If you haven't yet done so, you should read the [Build Environment Setup](getting_started_build_tools.md) and [Make Instructions](getting_started_make_guide.md) guides.
## Can't Program on Linux
You will need proper permission to operate a device. For Linux users see udev rules below. Easy way is to use `sudo` command, if you are not familiar with this command check its manual with `man sudo` or this page on line.
You will need proper permissions to operate a device. For Linux users, see the instructions regarding `udev` rules, below. If you have issues with `udev`, a work-around is to use the `sudo` command. If you are not familiar with this command, check its manual with `man sudo` or [see this webpage](https://linux.die.net/man/8/sudo).
In short when your controller is ATMega32u4,
An example of using `sudo`, when your controller is ATMega32u4:
$ sudo dfu-programmer atmega32u4 erase --force
$ sudo dfu-programmer atmega32u4 flash your.hex
$ sudo dfu-programmer atmega32u4 reset
or just
or just:
$ sudo make <keyboard>:<keymap>:dfu
But to run `make` with root privilege is not good idea. Use former method if possible.
## WINAVR is Obsolete
It is no longer recommended and may cause some problem.
See [TMK Issue #99](https://github.com/tmk/tmk_keyboard/issues/99).
## USB VID and PID
You can use any ID you want with editing `config.h`. Using any presumably unused ID will be no problem in fact except for very low chance of collision with other product.
Most boards in QMK use `0xFEED` as the vendor ID. You should look through other keyboards to make sure you pick a unique Product ID.
Also see this.
https://github.com/tmk/tmk_keyboard/issues/150
You can buy a really unique VID:PID here. I don't think you need this for personal use.
- http://www.obdev.at/products/vusb/license.html
- http://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1
Note that running `make` with `sudo` is generally *not* a good idea, and you should use one of the former methods, if possible.
## Linux `udev` Rules
On Linux you need proper privilege to access device file of MCU, you'll have to use `sudo` when flashing firmware. You can circumvent this with placing these files in `/etc/udev/rules.d/`.
On Linux, you'll need proper privileges to access the MCU. You can either use
`sudo` when flashing firmware, or place these files in `/etc/udev/rules.d/`.
**/etc/udev/rules.d/50-atmel-dfu.rules:**
```
@ -52,6 +37,21 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", MODE:="066
SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
```
## WINAVR is Obsolete
It is no longer recommended and may cause some problem.
See [TMK Issue #99](https://github.com/tmk/tmk_keyboard/issues/99).
## USB VID and PID
You can use any ID you want with editing `config.h`. Using any presumably unused ID will be no problem in fact except for very low chance of collision with other product.
Most boards in QMK use `0xFEED` as the vendor ID. You should look through other keyboards to make sure you pick a unique Product ID.
Also see this.
https://github.com/tmk/tmk_keyboard/issues/150
You can buy a really unique VID:PID here. I don't think you need this for personal use.
- http://www.obdev.at/products/vusb/license.html
- http://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1
## Cortex: `cstddef: No such file or directory`
GCC 4.8 of Ubuntu 14.04 had this problem and had to update to 4.9 with this PPA.
@ -61,7 +61,6 @@ https://github.com/tmk/tmk_keyboard/issues/212
https://github.com/tmk/tmk_keyboard/wiki/mbed-cortex-porting#compile-error-cstddef
https://developer.mbed.org/forum/mbed/topic/5205/
## `clock_prescale_set` and `clock_div_1` Not Available
Your toolchain is too old to support the MCU. For example WinAVR 20100110 doesn't support ATMega32u2.

@ -31,11 +31,14 @@ git
Install the dependencies with your favorite package manager.
Debian/Ubuntu example:
Debian / Ubuntu example:
sudo apt-get update
sudo apt-get install gcc unzip wget zip gcc-avr binutils-avr avr-libc dfu-programmer dfu-util gcc-arm-none-eabi binutils-arm-none-eabi libnewlib-arm-none-eabi
Fedora / Red Hat example:
sudo dnf install gcc unzip wget zip dfu-util dfu-programmer avr-gcc avr-libc binutils-avr32-linux-gnu arm-none-eabi-gcc-cs arm-none-eabi-binutils-cs arm-none-eabi-newlib
## Nix
If you're on [NixOS](https://nixos.org/), or have Nix installed on Linux or macOS, run `nix-shell` from the repository root to get a build environment.

@ -33,7 +33,7 @@ The state of the Keymap layer is determined by two 32 bit parameters:
* **`default_layer_state`** indicates a base keymap layer (0-31) which is always valid and to be referred (the default layer).
* **`layer_state`** has current on/off status of each layer in its bits.
Keymap layer '0' is usually `default_layer`, wither other layers initially off after booting up the firmware, although this can configured differently in `config.h`. It is useful to change `default_layer` when you completely switch a key layout, for example, if you want to switch to Colemak instead of Qwerty.
Keymap layer '0' is usually the `default_layer`, with other layers initially off after booting up the firmware, although this can configured differently in `config.h`. It is useful to change `default_layer` when you completely switch a key layout, for example, if you want to switch to Colemak instead of Qwerty.
Initial state of Keymap Change base layout
----------------------- ------------------

@ -0,0 +1 @@
#include "1up60rgb.h"

@ -0,0 +1,20 @@
#ifndef KB_H
#define KB_H
#include "quantum.h"
#define KEYMAP( \
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \
K400, K401, K403, K406, K410, K411, K413, K414 \
) { \
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \
{ K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \
{ K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314 }, \
{ K400, K401, KC_NO, K403, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, KC_NO, K413, K414 } \
}
#endif

@ -0,0 +1,58 @@
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER 1upkeyboards
#define PRODUCT 1UP RGB Underglow PCB
#define DESCRIPTION 60% keyboard with RGB underglow
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 15
/* key matrix pins */
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3, F4 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* number of backlight levels */
#define BACKLIGHT_PIN B6
#ifdef BACKLIGHT_PIN
#define BACKLIGHT_LEVELS 5
#endif
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* prevent stuck modifiers */
#define PREVENT_STUCK_MODIFIERS
#define RGB_DI_PIN E2
#ifdef RGB_DI_PIN
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 20
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#endif
#endif

@ -0,0 +1,72 @@
#include "1up60rgb.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KEYMAP(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT,
KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT,
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL),
KEYMAP(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
;
switch (id) {
}
return MACRO_NONE;
}
void matrix_init_user(void) {
}
void matrix_scan_user(void) {
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return true;
}
void led_set_user(uint8_t usb_led) {
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
} else {
}
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
DDRB |= (1 << 2); PORTB &= ~(1 << 2);
} else {
DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
}
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
} else {
}
if (usb_led & (1 << USB_LED_COMPOSE)) {
} else {
}
if (usb_led & (1 << USB_LED_KANA)) {
} else {
}
}

@ -0,0 +1,72 @@
#include "1up60rgb.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KEYMAP(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT,
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL),
KEYMAP(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
;
switch (id) {
}
return MACRO_NONE;
}
void matrix_init_user(void) {
}
void matrix_scan_user(void) {
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return true;
}
void led_set_user(uint8_t usb_led) {
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
} else {
}
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
DDRB |= (1 << 2); PORTB &= ~(1 << 2);
} else {
DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
}
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
} else {
}
if (usb_led & (1 << USB_LED_COMPOSE)) {
} else {
}
if (usb_led & (1 << USB_LED_KANA)) {
} else {
}
}

@ -0,0 +1,72 @@
#include "1up60rgb.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KEYMAP(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT,
KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, KC_RALT, KC_RGUI, KC_RCTL),
KEYMAP(
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL,
KC_TRNS, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_UP, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_RGHT, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_DOWN, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
;
switch (id) {
}
return MACRO_NONE;
}
void matrix_init_user(void) {
}
void matrix_scan_user(void) {
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return true;
}
void led_set_user(uint8_t usb_led) {
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
} else {
}
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
DDRB |= (1 << 2); PORTB &= ~(1 << 2);
} else {
DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
}
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
} else {
}
if (usb_led & (1 << USB_LED_COMPOSE)) {
} else {
}
if (usb_led & (1 << USB_LED_KANA)) {
} else {
}
}

@ -0,0 +1,13 @@
# 1upkeyboards 60% RGB
Firmware for custom keyboard PCB with 60% key layout.
Keyboard Maintainer: [rempired](https://github.com/rempired)
Hardware Supported: 1upkeyboards 60% RGB
Hardware Availability: [1upkeyboards](https://1upkeyboards.com/rgb-underglow-1up-pcb.html)
Make example for this keyboard (after setting up your build environment):
make 1up60rgb:default
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

@ -0,0 +1,56 @@
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
CONSOLE_ENABLE ?= no # Console for debug(+400)
COMMAND_ENABLE ?= no # Commands for debug and configuration
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
AUDIO_ENABLE ?= no
RGBLIGHT_ENABLE ?= yes

@ -0,0 +1,31 @@
#include "chimera_ergo.h"
void uart_init(void) {
SERIAL_UART_INIT();
}
void led_init(void) {
DDRD |= (1<<1);
PORTD |= (1<<1);
DDRF |= (1<<4) | (1<<5);
PORTF |= (1<<4) | (1<<5);
}
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
uart_init();
led_init();
}
void matrix_scan_kb(void) {
// put your looping keyboard code here
// runs every cycle (a lot)
matrix_scan_user();
}
void led_set_kb(uint8_t usb_led) {
}

@ -0,0 +1,82 @@
#ifndef CHIMERA_ERGO_H
#define CHIMERA_ERGO_H
#include "quantum.h"
#include "matrix.h"
#include "backlight.h"
#include <stddef.h>
#define red_led_off PORTF |= (1<<5)
#define red_led_on PORTF &= ~(1<<5)
#define blu_led_off PORTF |= (1<<4)
#define blu_led_on PORTF &= ~(1<<4)
#define grn_led_off PORTD |= (1<<1)
#define grn_led_on PORTD &= ~(1<<1)
#define set_led_off red_led_off; grn_led_off; blu_led_off
#define set_led_red red_led_on; grn_led_off; blu_led_off
#define set_led_blue red_led_off; grn_led_off; blu_led_on
#define set_led_green red_led_off; grn_led_on; blu_led_off
#define set_led_yellow red_led_on; grn_led_on; blu_led_off
#define set_led_magenta red_led_on; grn_led_off; blu_led_on
#define set_led_cyan red_led_off; grn_led_on; blu_led_on
#define set_led_white red_led_on; grn_led_on; blu_led_on
/*
#define LED_B 5
#define LED_R 6
#define LED_G 7
#define all_leds_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
#define red_led_on PORTF |= (1<<LED_R)
#define red_led_off PORTF &= ~(1<<LED_R)
#define grn_led_on PORTF |= (1<<LED_G)
#define grn_led_off PORTF &= ~(1<<LED_G)
#define blu_led_on PORTF |= (1<<LED_B)
#define blu_led_off PORTF &= ~(1<<LED_B)
#define set_led_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
#define set_led_red PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_G) | (1<<LED_R)
#define set_led_blue PORTF = PORTF & ~(1<<LED_G) & ~(1<<LED_R) | (1<<LED_B)
#define set_led_green PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_R) | (1<<LED_G)
#define set_led_yellow PORTF = PORTF & ~(1<<LED_B) | (1<<LED_R) | (1<<LED_G)
#define set_led_magenta PORTF = PORTF & ~(1<<LED_G) | (1<<LED_R) | (1<<LED_B)
#define set_led_cyan PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G)
#define set_led_white PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G)
*/
// This a shortcut to help you visually see your layout.
// The first section contains all of the arguements
// The second converts the arguments into a two-dimensional array
#define KC_KEYMAP( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, \
k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, \
k24, k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, \
k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47, \
k48, k49, k50, k51 \
) \
{ \
{ KC_NO, KC_NO, KC_##k26, KC_##k15, KC_##k28, KC_##k01, KC_##k42, KC_##k31, KC_##k20, KC_##k33, KC_NO, KC_NO }, \
{ KC_##k00, KC_NO, KC_##k14, KC_##k27, KC_##k16, KC_##k36, KC_##k47, KC_##k19, KC_##k32, KC_##k21, KC_NO, KC_##k11 }, \
{ KC_##k12, KC_##k25, KC_##k02, KC_##k39, KC_##k17, KC_##k49, KC_##k50, KC_##k18, KC_##k44, KC_##k09, KC_##k34, KC_##k23 }, \
{ KC_##k24, KC_##k13, KC_##k38, KC_##k04, KC_##k05, KC_##k48, KC_##k51, KC_##k06, KC_##k07, KC_##k45, KC_##k22, KC_##k35 }, \
{ KC_##k29, KC_##k41, KC_##k03, KC_##k40, KC_##k37, KC_NO, KC_##k30, KC_##k43, KC_##k08, KC_##k10, KC_##k46, KC_NO }, \
}
#define KEYMAP( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, \
k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, \
k24, k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, \
k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47, \
k48, k49, k50, k51 \
) \
{ \
{ KC_NO, KC_NO, k26, k15, k28, k01, k42, k31, k20, k33, KC_NO, KC_NO }, \
{ k00, KC_NO, k14, k27, k16, k36, k47, k19, k32, k21, KC_NO, k11 }, \
{ k12, k25, k02, k39, k17, k49, k50, k18, k44, k09, k34, k23 }, \
{ k24, k13, k38, k04, k05, k48, k51, k06, k07, k45, k22, k35 }, \
{ k29, k41, k03, k40, k37, KC_NO, k30, k43, k08, k10, k46, KC_NO }, \
}
#endif

@ -0,0 +1,87 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER unknown
#define PRODUCT Chimera Ergo
#define DESCRIPTION q.m.k. keyboard firmware for Chimera Ergo
/* key matrix size */
#define MATRIX_ROWS 6
#define MATRIX_COLS 12
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
//#define BACKLIGHT_LEVELS 3
#define ONESHOT_TIMEOUT 500
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
#define PREVENT_STUCK_MODIFIERS
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
//UART settings for communication with the RF microcontroller
#define SERIAL_UART_BAUD 1000000
#define SERIAL_UART_DATA UDR1
#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
#define SERIAL_UART_INIT() do { \
/* baud rate */ \
UBRR1L = SERIAL_UART_UBRR; \
/* baud rate */ \
UBRR1H = SERIAL_UART_UBRR >> 8; \
/* enable TX and RX */ \
UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
/* 8-bit data */ \
UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
} while(0)
#endif

@ -0,0 +1,206 @@
// this is the style you want to emulate.
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
#include "chimera_ergo.h"
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
enum chimera_ergo_layers
{
_QWERTY,
_CAPS,
_NUMPAD,
_SYMBOLS,
_MACROS,
_NAV
};
#define KC_NMPD TG(_NUMPAD)
#define KC_SYMB TG(_SYMBOLS)
#define KC_SPFN LT(_NAV,KC_EQL)
#define KC_SCTL MT(MOD_LCTL, KC_LBRC)
#define KC_SCTR MT(MOD_LCTL, KC_RBRC)
#define KC_SPLT MT(MOD_LALT, KC_MINS)
#define KC_SPRT MT(MOD_LALT, KC_1)
#define KC_GBRC MT(MOD_RGUI, KC_RBRC)
#define KC_GQOT MT(MOD_LGUI, KC_QUOT)
#define KC_MESC LT(_MACROS, KC_ESC)
#define KC_INCL M(0)
#define KC_PULL M(1)
#define KC_PUSH M(2)
#define KC_SCAP M(3)
#define KC_SCOF M(4)
#define KC_CAD LALT(LCTL(KC_DEL))
#define LONGPRESS_DELAY 150
//#define LAYER_TOGGLE_DELAY 300
// Fillers to make layering more clear
#define _______ KC_TRNS
#define XXXXXXX KC_NO
#define KC_ KC_TRNS
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = KC_KEYMAP(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
LBRC, 1 ,SCTL,SPLT,SPFN, 5 , 6 ,GBRC,SPRT,SCTR, 0 ,RBRC,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
MESC, Q , W , E , R , T , Y , U , I , O , P ,QUOT,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
TAB , A , S , D , F , G , H , J , K , L ,SCLN,ENT ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
LSPO, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH,RSPC,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
NMPD,BSPC, SPC ,SYMB
// \------------------+----+----/ \---+----+----+--------------/
),
[_CAPS] = KC_KEYMAP(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
,UNDS, , , , , , , , , , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , , , , , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , , , ,COLN, ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
SCOF, , , , , , , , , , ,SCOF,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , ,
// \------------------+----+----/ \---+----+----+--------------/
),
[_NUMPAD] = KC_KEYMAP(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
, , , , , , , , , ,MINS, ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, ,COLN, , , , , 7 , 8 , 9 ,ASTR, ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, ,DOT , , , , , 4 , 5 , 6 ,PLUS, ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , 1 , 2 , 3 ,SLSH, ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , 0
// \------------------+----+----/ \---+----+----+--------------/
),
[_SYMBOLS] = KC_KEYMAP(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
, , , , , , , , , , , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN,BSLS,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
F1 , F2 , F3 , F4 , F5 , F6 , TILD,EQL ,UNDS,LCBR,RCBR, ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
F7 , F8 , F9 ,F10 ,F11 ,F12 , GRV ,PLUS,MINS,LBRC,RBRC, ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
PIPE, , ,
// \------------------+----+----/ \---+----+----+--------------/
),
[_MACROS] = KC_KEYMAP(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
, , , , , , , , , , , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , ,INCL, , , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , ,CAD , , , , , , , , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
SCAP, , , , , , , ,PULL,PUSH, , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , ,
// \------------------+----+----/ \---+----+----+--------------/
),
[_NAV] = KC_KEYMAP(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
, , , , , , , , , , , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , ,PGUP, UP ,PGDN,PSCR, ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , ,LEFT,DOWN,RGHT, , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , , , , , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
,DEL , ,
// \------------------+----+----/ \---+----+----+--------------/
),
};
const uint16_t PROGMEM fn_actions[] = {
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
switch(id) {
/* include some kind of library or header */
case 0:
if (record->event.pressed) {
SEND_STRING("#include <>");
return MACRO( T(LEFT), END);
}
break;
case 1:
if (record->event.pressed) {
SEND_STRING("git pull");
return MACRO( T(ENT), END );
}
break;
case 2:
if (record->event.pressed){
SEND_STRING("git push");
return MACRO( T(ENT), END );
}
break;
case 3:
if (record->event.pressed){
layer_on(_CAPS);
register_code(KC_CAPSLOCK);
unregister_code(KC_CAPSLOCK);
}
break;
case 4:
if (record->event.pressed){
layer_off(_CAPS);
register_code(KC_CAPSLOCK);
unregister_code(KC_CAPSLOCK);
}
break;
}
return MACRO_NONE;
};
void matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
switch (layer) {
case _QWERTY:
set_led_green;
break;
case _CAPS:
set_led_white;
break;
case _NUMPAD:
set_led_blue;
break;
case _SYMBOLS:
set_led_red;
break;
case _NAV:
set_led_magenta;
break;
case _MACROS:
set_led_cyan;
break;
default:
set_led_green;
break;
}
};

@ -0,0 +1,164 @@
/*
Copyright 2012 Jun Wako
Copyright 2014 Jack Humbert
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <stdbool.h>
#if defined(__AVR__)
#include <avr/io.h>
#endif
#include "wait.h"
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#include "timer.h"
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
# define matrix_bitpop(i) bitpop(matrix[i])
# define ROW_SHIFTER ((uint8_t)1)
#elif (MATRIX_COLS <= 16)
# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
# define matrix_bitpop(i) bitpop16(matrix[i])
# define ROW_SHIFTER ((uint16_t)1)
#elif (MATRIX_COLS <= 32)
# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
# define matrix_bitpop(i) bitpop32(matrix[i])
# define ROW_SHIFTER ((uint32_t)1)
#endif
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
__attribute__ ((weak))
void matrix_init_quantum(void) {
matrix_init_kb();
}
__attribute__ ((weak))
void matrix_scan_quantum(void) {
matrix_scan_kb();
}
__attribute__ ((weak))
void matrix_init_kb(void) {
matrix_init_user();
}
__attribute__ ((weak))
void matrix_scan_kb(void) {
matrix_scan_user();
}
__attribute__ ((weak))
void matrix_init_user(void) {
}
__attribute__ ((weak))
void matrix_scan_user(void) {
}
inline
uint8_t matrix_rows(void) {
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void) {
return MATRIX_COLS;
}
void matrix_init(void) {
matrix_init_quantum();
}
uint8_t matrix_scan(void)
{
SERIAL_UART_INIT();
uint32_t timeout = 0;
//the s character requests the RF slave to send the matrix
SERIAL_UART_DATA = 's';
//trust the external keystates entirely, erase the last data
uint8_t uart_data[14] = {0};
//there are 10 bytes corresponding to 10 columns, and an end byte
for (uint8_t i = 0; i < 14; i++) {
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
while(!SERIAL_UART_RXD_PRESENT){
timeout++;
if (timeout > 10000){
break;
}
}
uart_data[i] = SERIAL_UART_DATA;
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
//will only show up here if the correct bytes were recieved
if (uart_data[10] == 0xE0)
{
//shifting and transferring the keystates to the QMK matrix variable
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 6;
}
}
matrix_scan_quantum();
return 1;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<col));
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print_matrix_header();
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
phex(row); print(": ");
print_matrix_row(row);
print("\n");
}
}
uint8_t matrix_key_count(void)
{
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += matrix_bitpop(i);
}
return count;
}

@ -0,0 +1,19 @@
# Chimera Ergo
![Chimera Ergo](https://imgur.com/AA6ycMQ.jpg)
A split wireless 40% ergonomic keyboard
Keyboard Maintainer: [William Wilson](https://github.com/GlenPickle)
Hardware Supported: Chimera Ergo PCB, WaveShare core nRF51822
Hardware Availability: [Gerbers](https://github.com/GlenPickle/Chimera/tree/master/ergo/gerbers)
Make example for this keyboard (after setting up your build environment):
make chimera_ergo:default
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

@ -0,0 +1,82 @@
OPT_DEFS += -DCHIMERA_ERGO_PROMICRO
CHIMERA_ERGO_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
# # project specific files
SRC = matrix.c
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
# MIDI_ENABLE = YES # MIDI controls
UNICODE_ENABLE = YES # Unicode
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
USB = /dev/ttyACM0

@ -0,0 +1,31 @@
#include "chimera_ls.h"
void uart_init(void) {
SERIAL_UART_INIT();
}
void led_init(void) {
DDRD |= (1<<1);
PORTD |= (1<<1);
DDRF |= (1<<4) | (1<<5);
PORTF |= (1<<4) | (1<<5);
}
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
uart_init();
led_init();
}
void matrix_scan_kb(void) {
// put your looping keyboard code here
// runs every cycle (a lot)
matrix_scan_user();
}
void led_set_kb(uint8_t usb_led) {
}

@ -0,0 +1,82 @@
#ifndef CHIMERA_LETS_SPLIT_H
#define CHIMERA_LETS_SPLIT_H
#include "quantum.h"
#include "matrix.h"
#include "backlight.h"
#include <stddef.h>
#define red_led_off PORTF |= (1<<5)
#define red_led_on PORTF &= ~(1<<5)
#define blu_led_off PORTF |= (1<<4)
#define blu_led_on PORTF &= ~(1<<4)
#define grn_led_off PORTD |= (1<<1)
#define grn_led_on PORTD &= ~(1<<1)
#define set_led_off red_led_off; grn_led_off; blu_led_off
#define set_led_red red_led_on; grn_led_off; blu_led_off
#define set_led_blue red_led_off; grn_led_off; blu_led_on
#define set_led_green red_led_off; grn_led_on; blu_led_off
#define set_led_yellow red_led_on; grn_led_on; blu_led_off
#define set_led_magenta red_led_on; grn_led_off; blu_led_on
#define set_led_cyan red_led_off; grn_led_on; blu_led_on
#define set_led_white red_led_on; grn_led_on; blu_led_on
/*
#define LED_B 5
#define LED_R 6
#define LED_G 7
#define all_leds_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
#define red_led_on PORTF |= (1<<LED_R)
#define red_led_off PORTF &= ~(1<<LED_R)
#define grn_led_on PORTF |= (1<<LED_G)
#define grn_led_off PORTF &= ~(1<<LED_G)
#define blu_led_on PORTF |= (1<<LED_B)
#define blu_led_off PORTF &= ~(1<<LED_B)
#define set_led_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
#define set_led_red PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_G) | (1<<LED_R)
#define set_led_blue PORTF = PORTF & ~(1<<LED_G) & ~(1<<LED_R) | (1<<LED_B)
#define set_led_green PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_R) | (1<<LED_G)
#define set_led_yellow PORTF = PORTF & ~(1<<LED_B) | (1<<LED_R) | (1<<LED_G)
#define set_led_magenta PORTF = PORTF & ~(1<<LED_G) | (1<<LED_R) | (1<<LED_B)
#define set_led_cyan PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G)
#define set_led_white PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G)
*/
// This a shortcut to help you visually see your layout.
// The first section contains all of the arguements
// The second converts the arguments into a two-dimensional array
#define KC_KEYMAP( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, \
k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, \
k24, k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, \
k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47 \
) \
{ \
{ KC_##k43, KC_##k45, KC_##k34, KC_##k11, KC_##k23, KC_##k40, KC_##k38, KC_##k25, KC_##k00, KC_##k12 }, \
{ KC_##k31, KC_##k44, KC_##k46, KC_##k35, KC_##k22, KC_##k28, KC_##k39, KC_##k37, KC_##k24, KC_##k13 }, \
{ KC_##k30, KC_##k32, KC_##k33, KC_##k47, KC_##k09, KC_##k29, KC_##k27, KC_##k26, KC_##k36, KC_##k02 }, \
{ KC_##k19, KC_##k20, KC_##k21, KC_##k42, KC_##k18, KC_##k16, KC_##k15, KC_##k14, KC_##k41, KC_##k17 }, \
{ KC_##k06, KC_##k07, KC_##k08, KC_##k10, KC_NO, KC_##k05, KC_##k04, KC_##k03, KC_##k01, KC_NO }, \
}
#define KEYMAP( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, \
k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, \
k24, k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, \
k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47 \
) \
{ \
{ k43, k45, k34, k11, k23, k40, k38, k25, k00, k12 }, \
{ k31, k44, k46, k35, k22, k28, k39, k37, k24, k13 }, \
{ k30, k32, k33, k47, k09, k29, k27, k26, k36, k02 }, \
{ k19, k20, k21, k42, k18, k16, k15, k14, k41, k17 }, \
{ k06, k07, k08, k10, KC_NO, k05, k04, k03, k01, KC_NO }, \
}
#endif

@ -0,0 +1,87 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER unknown
#define PRODUCT Chimera Lets Split
#define DESCRIPTION q.m.k. keyboard firmware for Chimera Lets Split
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 12
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
//#define BACKLIGHT_LEVELS 3
#define ONESHOT_TIMEOUT 500
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
#define PREVENT_STUCK_MODIFIERS
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
//UART settings for communication with the RF microcontroller
#define SERIAL_UART_BAUD 1000000
#define SERIAL_UART_DATA UDR1
#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
#define SERIAL_UART_INIT() do { \
/* baud rate */ \
UBRR1L = SERIAL_UART_UBRR; \
/* baud rate */ \
UBRR1H = SERIAL_UART_UBRR >> 8; \
/* enable TX and RX */ \
UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
/* 8-bit data */ \
UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
} while(0)
#endif

@ -0,0 +1,191 @@
// this is the style you want to emulate.
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
#include "chimera_ls.h"
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
enum chimera_lets_split_layers
{
_QWERTY,
_CAPS,
_NUMPAD,
_SYMBOLS,
_MACROS,
_NAV
};
#define KC_NMPD TG(_NUMPAD)
#define KC_SYMB TG(_SYMBOLS)
#define KC_SPFN LT(_NAV,KC_EQL)
#define KC_SCTL MT(MOD_LCTL, KC_BSLS)
#define KC_SCTR MT(MOD_LCTL, KC_RBRC)
#define KC_SPLT MT(MOD_LALT, KC_MINS)
#define KC_MESC LT(_MACROS, KC_ESC)
#define KC_INCL M(0)
#define KC_PULL M(1)
#define KC_PUSH M(2)
#define KC_SCAP M(3)
#define KC_SCOF M(4)
#define KC_CAD LALT(LCTL(KC_DEL))
#define LONGPRESS_DELAY 150
//#define LAYER_TOGGLE_DELAY 300
// Fillers to make layering more clear
#define _______ KC_TRNS
#define XXXXXXX KC_NO
#define KC_ KC_TRNS
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = KC_KEYMAP(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
MESC, Q , W , E , R , T , Y , U , I , O , P ,BSPC,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
TAB , A , S , D , F , G , H , J , K , L ,SCLN, ENT,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
LSPO, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH,RSPC,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
SCTL,SPFN,SPLT,AMPR,NMPD,SPC , SPC ,SYMB,ASTR,EXLM,LBRC,SCTR
//`----+----+----+----+----+----' `----+----+----+----+----+----'
),
[_CAPS] = KC_KEYMAP(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
, , , , , , , , , , , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , , , ,COLN, ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , , , , , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, ,UNDS, , , , , , , , ,
//`----+----+----+----+----+----' `----+----+----+----+----+----'
),
[_NUMPAD] = KC_KEYMAP(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
, , , , , , , 7 , 8 , 9 ,MINS,QUOT,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , 4 , 5 , 6 ,PLUS, ENT,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
LSFT, , , , , , , 1 , 2 , 3 ,ASTR, EQL,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , ,BSPC, SPC , 0 , 0 , DOT,SLSH,
//`----+----+----+----+----+----' `----+----+----+----+----+----'
),
[_SYMBOLS] = KC_KEYMAP(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN,QUOT,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
F1 , F2 , F3 , F4 , F5 , F6 , TILD,EQL ,UNDS,LCBR,RCBR,PIPE,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
F7 , F8 , F9 , F10, F11, F12, GRV ,PLUS,MINS,LBRC,RBRC,BSLS,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , NO ,BSPC, SPC , , , , ,
//`----+----+----+----+----+----' `----+----+----+----+----+----'
),
[_NAV] = KC_KEYMAP(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
, , , , DEL,BSPC, ,HOME, UP , END, INS,PSCR,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , ,LSFT,LCTL, ENT, ,LEFT,DOWN,RGHT, DEL, ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , ,PGUP,PGDN, , , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , ,DEL , , , , , ,
//`----+----+----+----+----+----' `----+----+----+----+----+----'
),
[_MACROS] = KC_KEYMAP(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
, , , , , , , ,INCL, , , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , ,CAD , , , , , , , , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
SCAP, , , , , , , ,PULL,PUSH, ,SCAP,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , , , , ,
//`----+----+----+----+----+----' `----+----+----+----+----+----'
),
};
const uint16_t PROGMEM fn_actions[] = {
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
switch(id) {
/* include some kind of library or header */
case 0:
if (record->event.pressed) {
SEND_STRING("#include <>");
return MACRO( T(LEFT), END);
}
break;
case 1:
if (record->event.pressed) {
SEND_STRING("git pull");
return MACRO( T(ENT), END );
}
break;
case 2:
if (record->event.pressed){
SEND_STRING("git push");
return MACRO( T(ENT), END );
}
break;
case 3:
if (record->event.pressed){
layer_on(_CAPS);
register_code(KC_CAPSLOCK);
unregister_code(KC_CAPSLOCK);
}
break;
case 4:
if (record->event.pressed){
layer_off(_CAPS);
register_code(KC_CAPSLOCK);
unregister_code(KC_CAPSLOCK);
}
break;
}
return MACRO_NONE;
};
void matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
switch (layer) {
case _QWERTY:
set_led_green;
break;
case _CAPS:
set_led_white;
break;
case _NUMPAD:
set_led_blue;
break;
case _SYMBOLS:
set_led_red;
break;
case _NAV:
set_led_magenta;
break;
case _MACROS:
set_led_cyan;
break;
default:
set_led_green;
break;
}
};

@ -0,0 +1,168 @@
/*
Copyright 2012 Jun Wako
Copyright 2014 Jack Humbert
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <stdbool.h>
#if defined(__AVR__)
#include <avr/io.h>
#endif
#include "wait.h"
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#include "timer.h"
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
# define matrix_bitpop(i) bitpop(matrix[i])
# define ROW_SHIFTER ((uint8_t)1)
#elif (MATRIX_COLS <= 16)
# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
# define matrix_bitpop(i) bitpop16(matrix[i])
# define ROW_SHIFTER ((uint16_t)1)
#elif (MATRIX_COLS <= 32)
# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
# define matrix_bitpop(i) bitpop32(matrix[i])
# define ROW_SHIFTER ((uint32_t)1)
#elif (MATRIX_COLS <= 64)
# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF0123456789ABCDEF\n")
# define print_matrix_row(row) print_bin_reverse64(matrix_get_row(row))
# define matrix_bitpop(i) bitpop64(matrix[i])
# define ROW_SHIFTER ((uint64_t)1)
#endif
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
__attribute__ ((weak))
void matrix_init_quantum(void) {
matrix_init_kb();
}
__attribute__ ((weak))
void matrix_scan_quantum(void) {
matrix_scan_kb();
}
__attribute__ ((weak))
void matrix_init_kb(void) {
matrix_init_user();
}
__attribute__ ((weak))
void matrix_scan_kb(void) {
matrix_scan_user();
}
__attribute__ ((weak))
void matrix_init_user(void) {
}
__attribute__ ((weak))
void matrix_scan_user(void) {
}
inline
uint8_t matrix_rows(void) {
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void) {
return MATRIX_COLS;
}
void matrix_init(void) {
matrix_init_quantum();
}
uint8_t matrix_scan(void)
{
SERIAL_UART_INIT();
uint32_t timeout = 0;
//the s character requests the RF slave to send the matrix
SERIAL_UART_DATA = 's';
//trust the external keystates entirely, erase the last data
uint8_t uart_data[11] = {0};
//there are 10 bytes corresponding to 10 columns, and an end byte
for (uint8_t i = 0; i < 11; i++) {
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
while(!SERIAL_UART_RXD_PRESENT){
timeout++;
if (timeout > 10000){
break;
}
}
uart_data[i] = SERIAL_UART_DATA;
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
//will only show up here if the correct bytes were recieved
if (uart_data[10] == 0xE0)
{
//shifting and transferring the keystates to the QMK matrix variable
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5;
}
}
matrix_scan_quantum();
return 1;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<col));
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print_matrix_header();
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
phex(row); print(": ");
print_matrix_row(row);
print("\n");
}
}
uint8_t matrix_key_count(void)
{
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += matrix_bitpop(i);
}
return count;
}

@ -0,0 +1,19 @@
# Chimera LS
![Chimera LS](https://imgur.com/FOGlO4M.jpg)
A wireless version of the let's split: a split 40% ortholinear keyboard
Keyboard Maintainer: [William Wilson](https://github.com/GlenPickle)
Hardware Supported: Chimera LS PCB, WaveShare core nRF51822
Hardware Availability: [Gerbers](https://github.com/GlenPickle/Chimera/tree/master/ls/gerbers)
Make example for this keyboard (after setting up your build environment):
make chimera_ls:default
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

@ -0,0 +1,82 @@
OPT_DEFS += -DCHIMERA_LS_PROMICRO
CHIMERA_LS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
# # project specific files
SRC = matrix.c
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
# MIDI_ENABLE = YES # MIDI controls
UNICODE_ENABLE = YES # Unicode
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
USB = /dev/ttyACM0

@ -49,7 +49,7 @@
// This a shortcut to help you visually see your layout.
// The first section contains all of the arguements
// The second converts the arguments into a two-dimensional array
#define KEYMAP( \
#define KC_KEYMAP( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, \
k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, \
k28, k29, k31, k32, k33, k34, k35, k36, k37, k38, k41, k42, k43, k44,\
@ -63,4 +63,17 @@
{ KC_NO, KC_##k28, KC_##k14, KC_##k00, KC_##k45, KC_##k48, KC_##k13, KC_##k27, KC_##k44, KC_NO }, \
}
#define KEYMAP( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, \
k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, \
k28, k29, k31, k32, k33, k34, k35, k36, k37, k38, k41, k42, k43, k44,\
k45, k46, k47, k48 \
) \
{ \
{ k01, k02, k03, k04, k05, k08, k09, k10, k11, k12 }, \
{ k15, k16, k17, k18, k19, k22, k23, k24, k25, k26 }, \
{ k29, k31, k32, k33, k34, k37, k38, k41, k42, k43 }, \
{ KC_NO, k06, k20, k35, k46, k47, k36, k21, k07, KC_NO }, \
{ KC_NO, k28, k14, k00, k45, k48, k13, k27, k44, KC_NO }, \
}
#endif

@ -44,7 +44,7 @@ enum chimera_ortho_layers
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = KEYMAP(
[_QWERTY] = KC_KEYMAP(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
MESC, Q , W , E , R , T ,SCTL, SCTR, Y , U , I , O , P ,QUOT,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
@ -56,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// \------------------+----+----+---/ \---+----+----+-------------------/
),
[_CAPS] = KEYMAP(
[_CAPS] = KC_KEYMAP(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
, , , , , , , , , , , , , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
@ -68,7 +68,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// \------------------+----+----+---/ \---+----+----+-------------------/
),
[_NUMPAD] = KEYMAP(
[_NUMPAD] = KC_KEYMAP(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
, ,COLN , , , , , , , 7 , 8 , 9 ,ASTR,MINS,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
@ -80,7 +80,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// \------------------+----+----+---/ \---+----+----+-------------------/
),
[_SYMBOLS] = KEYMAP(
[_SYMBOLS] = KC_KEYMAP(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
,EXLM, AT ,HASH,DLR ,PERC, , ,CIRC,AMPR,ASTR,LPRN,RPRN,BSLS,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
@ -92,7 +92,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// \------------------+----+----+---/ \---+----+----+-------------------/
),
[_NAV] = KEYMAP(
[_NAV] = KC_KEYMAP(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
, , , , , , , , , , UP , ,PSCR, ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
@ -104,7 +104,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// \------------------+----+----+---/ \---+----+----+-------------------/
),
[_MACROS] = KEYMAP(
[_MACROS] = KC_KEYMAP(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
, , , , , , , , , ,INCL, , , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|

@ -206,7 +206,7 @@ qk_tap_dance_action_t tap_dance_actions[] = {
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = KEYMAP(
[_QWERTY] = KC_KEYMAP(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
MESC, Q ,CSHW,ENAV, R , T ,SPC , CLPS, Y , U ,INAV, O , P ,TTT,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
@ -218,7 +218,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// \------------------+----+----+---/ \---+----+----+-------------------/
),
[_NUMPAD] = KEYMAP(
[_NUMPAD] = KC_KEYMAP(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
, , , ,ASTR, , , , , 7 , 8 , 9 ,ASTR,/**/,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
@ -230,7 +230,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// \------------------+----+----+---/ \---+----+----+-------------------/
),
[_SYMBOLS] = KEYMAP(
[_SYMBOLS] = KC_KEYMAP(
//,----+----+-----+----+----+----+----. ,----+----+----+----+----+----+----.
,EXLM, AT ,LCBR,RCBR,HASH, , ,CIRC,AMPR,ASTR,LPRN,RPRN,/**/,
//|----+----+-----+----+----+----+----| |----+----+----+----+----+----+----|
@ -242,7 +242,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// \-------------------+----+----+---/ \---+----+----+-------------------/
),
[_FUNCTION] = KEYMAP(
[_FUNCTION] = KC_KEYMAP(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
F6F7 ,F1 ,F2 ,F3 ,ALF4,F5 ,F6 , F7 ,F8 ,F9 ,F10 ,F11 ,F12 ,/**/,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
@ -254,7 +254,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// \------------------+----+----+---/ \---+----+----+-------------------/
),
[_NAV] = KEYMAP(
[_NAV] = KC_KEYMAP(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
, ,SNAPLEFT,/**/,SNAPRIGHT,, , , , , UP , , , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
@ -266,7 +266,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// \------------------+----+----+---/ \---+----+----+-------------------/
),
[_TEXTNAV] = KEYMAP(
[_TEXTNAV] = KC_KEYMAP(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
, , , , , , , , , ,/**/, , , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
@ -278,7 +278,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// \------------------+----+----+---/ \---+----+----+-------------------/
),
[_MOUSE] = KEYMAP(
[_MOUSE] = KC_KEYMAP(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
, , ,MS_UP, , , , , , , UP , , , ,/**/
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
@ -291,7 +291,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
),
[_MACROS] = KEYMAP(
[_MACROS] = KC_KEYMAP(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
/**/,RESET,SECRET_2,SECRET_3, , , ,SYSTEM_SLEEP, , ,INCL, , , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|

@ -2,11 +2,8 @@
#define SPLIT_KEYBOARD_UTIL_H
#include <stdbool.h>
#include "eeconfig.h"
#ifdef EE_HANDS
#define EECONFIG_BOOTMAGIC_END (uint8_t *)10
#define EECONFIG_HANDEDNESS EECONFIG_BOOTMAGIC_END
#endif
#define SLAVE_I2C_ADDRESS 0x32

@ -0,0 +1,14 @@
Dilly
=====
A 3x10 ortholinear keyboard using Kailh PG1350 Lower Profile Choc switches.
Keyboard Maintainer: Keebio
Hardware Supported: Dilly PCB, Arduino Pro Micro
Hardware Availability: [Keebio](https://keeb.io)
Make example for this keyboard (after setting up your build environment):
make dilly:default
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

@ -0,0 +1,62 @@
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xCB10
#define PRODUCT_ID 0x113a
#define DEVICE_VER 0x0100
#define MANUFACTURER Keebio
#define PRODUCT Dilly
#define DESCRIPTION 30 percent ortholinear keyboard
/* key matrix size */
#define MATRIX_ROWS 6
#define MATRIX_COLS 5
/* key matrix pins */
#define MATRIX_ROW_PINS { D7, E6, B4, B1, B3, B2 }
#define MATRIX_COL_PINS { D2, D4, C6, F6, F5 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* number of backlight levels */
#define BACKLIGHT_PIN B5
#ifdef BACKLIGHT_PIN
#define BACKLIGHT_LEVELS 3
#endif
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* prevent stuck modifiers */
#define PREVENT_STUCK_MODIFIERS
#ifdef RGB_DI_PIN
#define RGBLIGHT_ANIMATIONS
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#endif
#define RGB_DI_PIN D3
#define RGBLIGHT_TIMER
#define RGBLED_NUM 10
#define ws2812_PORTREG PORTD
#define ws2812_DDRREG DDRD
#endif

@ -0,0 +1 @@
#include "dilly.h"

@ -0,0 +1,31 @@
#ifndef DILLY_H
#define DILLY_H
#include "quantum.h"
#define KEYMAP( \
A1, A2, A3, A4, A5, A6, A7, A8, A9, A10, \
B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, \
C1, C2, C3, C4, C5, C6, C7, C8, C9, C10 \
) { \
{ A1, A2, A3, A4, A5 }, \
{ B1, B2, B3, B4, B5 }, \
{ C1, C2, C3, C4, C5 }, \
{ A10, A9, A8, A7, A6 }, \
{ B10, B9, B8, B7, B6 }, \
{ C10, C9, C8, C7, C6 } \
}
// Used to create a keymap using only KC_ prefixed keys
#define KC_KEYMAP( \
A1, A2, A3, A4, A5, A6, A7, A8, A9, A10, \
B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, \
C1, C2, C3, C4, C5, C6, C7, C8, C9, C10 \
) \
KEYMAP( \
KC_##A1, KC_##A2, KC_##A3, KC_##A4, KC_##A5, KC_##A6, KC_##A7, KC_##A8, KC_##A9, KC_##A10, \
KC_##B1, KC_##B2, KC_##B3, KC_##B4, KC_##B5, KC_##B6, KC_##B7, KC_##B8, KC_##B9, KC_##B10, \
KC_##C1, KC_##C2, KC_##C3, KC_##C4, KC_##C5, KC_##C6, KC_##C7, KC_##C8, KC_##C9, KC_##C10 \
)
#endif

@ -0,0 +1,6 @@
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
#endif

@ -0,0 +1,107 @@
#include "dilly.h"
#include "action_layer.h"
extern keymap_config_t keymap_config;
#define _BASE 0
#define _FN1 1
#define _FN2 2
#define _FN3 3
#define _FN4 4
#define _FN5 5
#define KC_ KC_TRNS
#define _______ KC_TRNS
// Tap-Hold keys
#define KC_ASFT MT(MOD_LSFT, KC_A)
#define KC_F_L3 LT(_FN3, KC_F)
#define KC_ZCTL MT(MOD_LCTL, KC_Z)
#define KC_XALT MT(MOD_LALT, KC_X)
#define KC_CGUI MT(MOD_LGUI, KC_C)
#define KC_V_L4 LT(_FN4, KC_V)
#define KC_SPL2 LT(_FN2, KC_SPC)
#define KC_B_L1 LT(_FN1, KC_B)
#define KC_N_L5 LT(_FN5, KC_N)
#define KC_MALT MT(MOD_RALT, KC_M)
#define KC_BSCT MT(MOD_RCTL, KC_BSPC)
#define KC_ENTS MT(MOD_RSFT, KC_ENT)
#define KC_ESCS MT(MOD_RSFT, KC_ESC)
#define KC_GUIC LGUI(KC_C)
#define KC_RST RESET
#define KC_BL_S BL_STEP
#define KC_DBUG DEBUG
#define KC_RTOG RGB_TOG
#define KC_RMOD RGB_MOD
#define KC_RHUI RGB_HUI
#define KC_RHUD RGB_HUD
#define KC_RSAI RGB_SAI
#define KC_RSAD RGB_SAD
#define KC_RVAI RGB_VAI
#define KC_RVAD RGB_VAD
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_BASE] = KC_KEYMAP(
//,----+----+----+----+----+----+----+----+----+----.
Q , W , E , R , T , Y , U , I , O , P ,
//|----+----+----+----+----+----+----+----+----+----|
ASFT, S , D ,F_L3, G , H , J , K , L ,ESCS,
//|----+----+----+----+----+----+----+----+----+----|
ZCTL,XALT,CGUI,V_L4,SPL2,B_L1,N_L5,MALT,BSCT,ENTS
//`----+----+----+----+----+----+----+----+----+----'
),
[_FN1] = KC_KEYMAP(
//,----+----+----+----+----+----+----+----+----+----.
1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 ,
//|----+----+----+----+----+----+----+----+----+----|
F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,
//|----+----+----+----+----+----+----+----+----+----|
, , , ,BSPC, , , , ,
//`----+----+----+----+----+----+----+----+----+----'
),
[_FN2] = KC_KEYMAP(
//,----+----+----+----+----+----+----+----+----+----.
EXLM, AT ,HASH,DLR ,PERC,CIRC,AMPR,ASTR,LPRN,RPRN,
//|----+----+----+----+----+----+----+----+----+----|
F11 ,F12 , , , , , , , ,GRV ,
//|----+----+----+----+----+----+----+----+----+----|
, , , , ,DEL , , , ,
//`----+----+----+----+----+----+----+----+----+----'
),
[_FN3] = KC_KEYMAP(
//,----+----+----+----+----+----+----+----+----+----.
, , , , ,MINS,EQL ,LBRC,RBRC,BSLS,
//|----+----+----+----+----+----+----+----+----+----|
TAB , , , , ,COMM,DOT ,SLSH,SCLN,QUOT,
//|----+----+----+----+----+----+----+----+----+----|
, , , ,BSPC, ,LEFT,DOWN, UP ,RGHT
//`----+----+----+----+----+----+----+----+----+----'
),
[_FN4] = KC_KEYMAP(
//,----+----+----+----+----+----+----+----+----+----.
, , , , ,UNDS,PLUS,LCBR,RCBR,PIPE,
//|----+----+----+----+----+----+----+----+----+----|
TAB , , , , , LT , GT ,QUES,COLN,DQUO,
//|----+----+----+----+----+----+----+----+----+----|
, ,GUIC, ,BSPC, ,HOME,PGDN,PGUP,END
//`----+----+----+----+----+----+----+----+----+----'
),
[_FN5] = KC_KEYMAP(
//,----+----+----+----+----+----+----+----+----+----.
RTOG,RMOD, ,RST ,RHUI,RSAI,RVAI, , , ,
//|----+----+----+----+----+----+----+----+----+----|
, ,DBUG, ,RHUD,RSAD,RVAD, , , ,
//|----+----+----+----+----+----+----+----+----+----|
BL_S, ,GUIC, , , , , , ,
//`----+----+----+----+----+----+----+----+----+----'
)
};

@ -0,0 +1,56 @@
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
AUDIO_ENABLE = no
RGBLIGHT_ENABLE = yes

@ -2,11 +2,7 @@
#define SPLIT_KEYBOARD_UTIL_H
#include <stdbool.h>
#ifdef EE_HANDS
#define EECONFIG_BOOTMAGIC_END (uint8_t *)10
#define EECONFIG_HANDEDNESS EECONFIG_BOOTMAGIC_END
#endif
#include "eeconfig.h"
#define SLAVE_I2C_ADDRESS 0x32

@ -2,11 +2,7 @@
#define SPLIT_KEYBOARD_UTIL_H
#include <stdbool.h>
#ifdef EE_HANDS
#define EECONFIG_BOOTMAGIC_END (uint8_t *)10
#define EECONFIG_HANDEDNESS EECONFIG_BOOTMAGIC_END
#endif
#include "eeconfig.h"
#define SLAVE_I2C_ADDRESS 0x32

@ -0,0 +1,16 @@
{
"keyboard_name": "Iris",
"manufacturer": "Keebio",
"identifier": "0x1256",
"url": "Keeb.io",
"maintainer": "qmk",
"processor": "atmega32u4",
"bootloader": "",
"width": 14.5,
"height": 5,
"layouts": {
"KEYMAP": {
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":8.5, "y":2}, {"x":9.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7.5, "y":3}, {"x":8.5, "y":3}, {"x":9.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}, {"x":12.5, "y":3}, {"x":13.5, "y":3}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":7.5, "y":4}, {"x":8.5, "y":4}, {"x":9.5, "y":4}]
}
}
}

@ -0,0 +1,43 @@
/*
Copyright 2017 Danny Nguyen <danny@hexwire.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "config_common.h"
/* Use I2C or Serial, not both */
#define USE_SERIAL
// #define USE_I2C
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS
#define TAPPING_TERM 150
#undef RGBLED_NUM
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 12
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#endif

@ -0,0 +1,145 @@
#include "iris.h"
#include "action_layer.h"
#include "eeconfig.h"
extern keymap_config_t keymap_config;
#define _QWERTY 0
#define _LOWER 1
#define _RAISE 2
#define _ADJUST 16
enum custom_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
ADJUST,
};
#define KC_ KC_TRNS
#define _______ KC_TRNS
#define KC_CAPW LGUI(LSFT(KC_3)) // Capture whole screen
#define KC_CPYW LGUI(LSFT(LCTL(KC_3))) // Copy whole screen
#define KC_CAPP LGUI(LSFT(KC_4)) // Capture portion of screen
#define KC_CPYP LGUI(LSFT(LCTL(KC_4))) // Copy portion of screen
#define KC_ESCC MT(MOD_LCTL, KC_ESC) // Control (hold), Escape (tap)
#define KC_BACK LGUI(KC_LEFT) // Browser Back
#define KC_FORW LGUI(KC_RIGHT) // Browser Forward
#define KC_LOWR LOWER
#define KC_RASE RAISE
#define KC_RST RESET
#define KC_BL_S BL_STEP
#define KC_ENTS MT(MOD_LSFT, KC_ENT)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = KC_KEYMAP(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
GRV , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 ,MINS,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
TAB , Q , W , E , R , T , Y , U , I , O , P ,PLUS,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
ESCC, A , S , D , F , G , H , J , K , L ,SCLN,QUOT,
//|----+----+----+----+----+----+----. ,----|----+----+----+----+----+----|
LSFT, Z , X , C , V , B ,SPC , LALT, N , M ,COMM,DOT ,SLSH,DEL ,
//`----+----+----+--+-+----+----+----/ \----+----+----+----+----+----+----'
LGUI,LOWR,SPC , BSPC,ENTS,RASE
// `----+----+----' `----+----+----'
),
[_LOWER] = KC_KEYMAP(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
TILD,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN,BSPC,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
RST , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
DEL ,CAPP,LEFT,RGHT, UP ,LBRC, RBRC, P4 , P5 , P6 ,PLUS,PIPE,
//|----+----+----+----+----+----+----. ,----|----+----+----+----+----+----|
BL_S,CPYP, , ,DOWN,LCBR,LPRN, RPRN,RCBR, P1 , P2 , P3 ,MINS, ,
//`----+----+----+--+-+----+----+----/ \----+----+----+----+----+----+----'
, ,DEL , DEL , , P0
// `----+----+----' `----+----+----'
),
[_RAISE] = KC_KEYMAP(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
F12 , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN, ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
DEL ,MPRV,BACK,FORW,PGUP,UNDS, EQL ,HOME, , , ,BSLS,
//|----+----+----+----+----+----+----. ,----|----+----+----+----+----+----|
MUTE,MSTP,MPLY,VOLD,PGDN,MINS, , ,PLUS,END , , , , ,
//`----+----+----+--+-+----+----+----/ \----+----+----+----+----+----+----'
, , , , ,
// `----+----+----' `----+----+----'
),
[_ADJUST] = KEYMAP(
//,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------.
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
RESET , DEBUG , RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______,
//|--------+--------+--------+--------+--------+--------+--------. ,--------|--------+--------+--------+--------+--------+--------|
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
//`--------+--------+--------+----+---+--------+--------+--------/ \--------+--------+--------+---+----+--------+--------+--------'
_______, _______, _______, _______, _______, _______
// `--------+--------+--------' `--------+--------+--------'
)
};
#ifdef AUDIO_ENABLE
float tone_qwerty[][2] = SONG(QWERTY_SOUND);
#endif
void persistent_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_SONG(tone_qwerty);
#endif
persistent_default_layer_set(1UL<<_QWERTY);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
break;
}
return true;
}

@ -0,0 +1,17 @@
## u/yanfali keymap for Iris
Based heavily off Hexwire's configuration. Differs in following ways:
1. Moved LALT to LCTL; I don't need CTL because of ESCC.
1. Moved RAISE to old LALT.
1. Moved ENTER to old RAISE.
1. Move QUOTE to old ENTER.
1. Moved PLUS to old QUOTE.
1. replaced music next and volume up with browser forward and back
through history
This configuration lets me use my thumbs for enter and backspace.
It turns out I need `+` a lot for programming so I moved it logically
below `-`. I also added a couple of web specific short cuts for
navigating previous and next in web history on OSX Chrome.

@ -1,4 +1,5 @@
RGBLIGHT_ENABLE = yes
BACKLIGHT_ENABLE = yes
ifndef QUANTUM_DIR
include ../../../../Makefile

@ -1,7 +1,8 @@
JC65
===
![JC65](https://imgur.com/a/C2oa5)
![JC65 with 32u4](https://i.imgur.com/I4hCyBI.jpg)
![JC65 with 32a](https://i.imgur.com/9cJ9UbX.jpg)
The JC65 PCB actually has two revisions: A QMK native version, and a PS2AVRGB version. Jchan offered both PCBs as options during the M65-A Round 1 group buy and are now currently available on [keyclack.com](https://keyclack.com/)
@ -11,4 +12,4 @@ Make example native QMK version (after setting up your build environment):
Make example ps2avrGB version (after setting up your build environment):
make jc65/v32a:default
make jc65/v32a:default

@ -9,11 +9,14 @@
// Define Macros
#define M_PRTS M(0)
#define M_PRTA M(1)
#define M_MSSN M(2)
#define M_APPS M(3)
#define M_SPOT M(4)
#define M_LEFT M(5)
#define M_RGHT M(6)
#define M_PRTSC M(2)
#define M_PRTAC M(3)
#define M_MSSN M(4)
#define M_APPS M(5)
#define M_SPOT M(6)
#define M_LEFT M(7)
#define M_RGHT M(8)
#define RGB_WHT M(9)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// Base Layer
@ -35,15 +38,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// Mac Layer
[_MAC] = KEYMAP(
TO(0), KC_F14, KC_F15, M_APPS, M_MSSN, KC_F11, KC_F12,KC_MRWD,KC_MPLY,KC_MFFD,KC_MUTE,KC_VOLD,KC_VOLU,KC_EJCT, KC_NO, KC_NO,
KC_TRNS, M_PRTS, M_PRTA,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, TO(0), M_MSSN,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS, M_SPOT, M_SPOT, M_SPOT, KC_TRNS,KC_TRNS,KC_TRNS, M_LEFT, M_APPS, M_RGHT
KC_NO, M_PRTS, M_PRTA, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_BSPC, KC_NO,
KC_NO,M_PRTSC,M_PRTAC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_ENT, KC_NO,
KC_NO, KC_NO, KC_NO, KC_X, KC_C, KC_V, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, TO(0), M_MSSN, KC_NO,
KC_NO, KC_NO,KC_LGUI, M_SPOT, M_SPOT, M_SPOT, KC_RGUI, KC_NO, KC_NO, M_LEFT, M_APPS, M_RGHT
),
// RGB and BL Layer
[_RGB] = KEYMAP(
TO(0), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, TO(0),
KC_NO,RGB_HUD,RGB_HUI, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,BL_TOGG,
KC_NO,RGB_HUD,RGB_HUI,RGB_WHT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,BL_TOGG,
KC_NO,RGB_SAD,RGB_SAI, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,RGB_TOG,
KC_NO, KC_NO,RGB_VAD,RGB_VAI, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,RGB_MOD,RGB_RMOD, KC_NO,RGB_M_P,RGB_M_R,
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,RGB_M_G,RGB_M_SW
@ -55,25 +58,25 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
if (record->event.pressed) {
switch(id) {
case 0:
return MACRO(D(LGUI), D(LSFT), T(3), U(LSFT), U(LGUI), END); //Mac print screen
break;
return MACRO(D(LGUI), D(LSFT), T(3), U(LSFT), U(LGUI), END); // Mac print screen
case 1:
return MACRO(D(LGUI), D(LSFT), T(4), U(LSFT), U(LGUI), END); //Mac print area
break;
return MACRO(D(LGUI), D(LSFT), T(4), U(LSFT), U(LGUI), END); // Mac print area
case 2:
return MACRO(D(LCTL), T(UP), U(LCTL), END); //Mac mission control
break;
return MACRO(D(LCTL), D(LSFT), D(LGUI), T(3), D(LCTL), D(LSFT), D(LGUI), END); // Mac print screen to clipboard
case 3:
return MACRO(D(LCTL), T(DOWN), U(LCTL), END); //Mac applications
break;
return MACRO(D(LCTL), D(LSFT), D(LGUI), T(4), D(LCTL), D(LSFT), D(LGUI), END); // Mac print area to clipboard
case 4:
return MACRO(D(LGUI), T(SPC), U(LGUI), END); //Mac spotlight search
break;
return MACRO(D(LCTL), T(UP), U(LCTL), END); // Mac mission control
case 5:
return MACRO(D(LCTL), T(LEFT), U(LCTL), END); //Mac mission left
break;
return MACRO(D(LCTL), T(DOWN), U(LCTL), END); // Mac app windows
case 6:
return MACRO(D(LGUI), T(RGHT), U(LGUI), END); //Mac mission right
return MACRO(D(LGUI), T(SPC), U(LGUI), END); // Mac spotlight search
case 7:
return MACRO(D(LCTL), T(LEFT), U(LCTL), END); // Mac mission left
case 8:
return MACRO(D(LCTL), T(RGHT), U(LCTL), END); // Mac mission right
case 9:
rgblight_setrgb(0xff, 0xff, 0xff); // White rgb shortcut
break;
}
}

@ -1,6 +1,8 @@
JC65 ps2avrGB
=======
![JC65](https://i.imgur.com/9cJ9UbX.jpg)
A 65% keyboard with RGB
Keyboard Maintainer: [Jason Barnachea](https://github.com/nautxx)

@ -0,0 +1,93 @@
#include "v32u4.h"
// Define Layers
#define _BASE 0
#define _FNX 1
#define _MAC 2
#define _RGB 3
#define _OFF 4
// Define Macros
#define M_PRTS M(0)
#define M_PRTA M(1)
#define M_PRTSC M(2)
#define M_PRTAC M(3)
#define M_MSSN M(4)
#define M_APPS M(5)
#define M_SPOT M(6)
#define M_LEFT M(7)
#define M_RGHT M(8)
#define RGB_WHT M(9)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// Base Layer
[_BASE] = KEYMAP(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSLS, KC_GRV, KC_INS,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC, KC_BSPC, KC_DEL,
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT,KC_PGUP,
KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP,KC_PGDN,
MO(1),KC_LALT,KC_LGUI, KC_SPC, KC_SPC, KC_SPC, KC_RGUI, KC_NO,KC_RALT,KC_LEFT,KC_DOWN,KC_RGHT
),
// Fn Layer
[_FNX] = KEYMAP(
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,KC_TRNS, TG(4), TG(3),
KC_CAPS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, TG(2),KC_VOLU,KC_MPLY,
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_MRWD,KC_VOLD,KC_MFFD
),
// Mac Layer
[_MAC] = KEYMAP(
TO(0), KC_F14, KC_F15, M_APPS, M_MSSN, KC_F11, KC_F12,KC_MRWD,KC_MPLY,KC_MFFD,KC_MUTE,KC_VOLD,KC_VOLU,KC_EJCT, KC_NO, KC_NO,
KC_NO, M_PRTS, M_PRTA, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_BSPC, KC_NO,
KC_NO,M_PRTSC,M_PRTAC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_ENT, KC_NO,
KC_NO, KC_NO, KC_NO, KC_X, KC_C, KC_V, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, TO(0), M_MSSN, KC_NO,
KC_NO, KC_NO,KC_LGUI, M_SPOT, M_SPOT, M_SPOT, KC_RGUI, KC_NO, KC_NO, M_LEFT, M_APPS, M_RGHT
),
// RGB and BL Layer
[_RGB] = KEYMAP(
TO(0), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, TO(0),
KC_NO,RGB_HUD,RGB_HUI,RGB_WHT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,BL_TOGG,
KC_NO,RGB_SAD,RGB_SAI, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,RGB_TOG,
KC_NO, KC_NO,RGB_VAD,RGB_VAI, BL_DEC, BL_INC, KC_NO, KC_NO, KC_NO, KC_NO,RGB_MOD,RGB_RMOD, KC_NO,RGB_M_P,RGB_M_R,
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,RGB_M_G,RGB_M_SW
),
// Mash Layer
[_OFF] = KEYMAP(
TO(0), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO
),
};
// The Macros
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
if (record->event.pressed) {
switch(id) {
case 0:
return MACRO(D(LGUI), D(LSFT), T(3), U(LSFT), U(LGUI), END); // Mac print screen
case 1:
return MACRO(D(LGUI), D(LSFT), T(4), U(LSFT), U(LGUI), END); // Mac print area
case 2:
return MACRO(D(LCTL), D(LSFT), D(LGUI), T(3), D(LCTL), D(LSFT), D(LGUI), END); // Mac print screen to clipboard
case 3:
return MACRO(D(LCTL), D(LSFT), D(LGUI), T(4), D(LCTL), D(LSFT), D(LGUI), END); // Mac print area to clipboard
case 4:
return MACRO(D(LCTL), T(UP), U(LCTL), END); // Mac mission control
case 5:
return MACRO(D(LCTL), T(DOWN), U(LCTL), END); // Mac app windows
case 6:
return MACRO(D(LGUI), T(SPC), U(LGUI), END); // Mac spotlight search
case 7:
return MACRO(D(LCTL), T(LEFT), U(LCTL), END); // Mac mission left
case 8:
return MACRO(D(LCTL), T(RGHT), U(LCTL), END); // Mac mission right
case 9:
rgblight_setrgb(0xff, 0xff, 0xff); // White rgb shortcut
break;
}
}
return MACRO_NONE;
};

@ -0,0 +1,18 @@
Naut's Keymap
=======
Layer 1: HHKB Split backspace, 6.25u space, control on caps, Fn on L-Ctl.
Layer 2: F Row on numrow, caps on tab, media shortcuts on arrows
Layer 3: Mac Media buttons on numrow
Layer 4: RGB control
Layer 5: Keyboard off (for mashing purposes and reset)
Keymap Maintainer: [Jason Barnachea](https://github.com/nautxx)
Difference from base layout: HHKBish layout. HHKB Fn layer. Mac media layer. RGB control layer. Button mashing layer.
Intended usage: Daily driver for keyboard peacocking.

@ -0,0 +1,2 @@
RGBLIGHT_ENABLE = yes
BACKLIGHT_ENABLE = yes

@ -1,7 +1,7 @@
JC65
===
![JC65](https://imgur.com/a/C2oa5)
![JC65](https://i.imgur.com/I4hCyBI.jpg)
The JC65 PCB actually has two revisions: A QMK native version, and a PS2AVRGB version. Jchan offered both PCBs as options during the M65-A Round 1 group buy, and were also available choices for the 65% acrylic case group buy. In the near future both PCB versions should be available from keyclack.com when the storefront part opens.

@ -45,7 +45,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
KC_LCTRL,KC_LGUI, KC_LALT, ADJUST, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
KC_LCTRL,KC_LGUI, KC_LALT, ADJUST, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
),
/* Colemak
@ -88,9 +88,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* ,-----------------------------------------------------------------------------------.
* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | | \ | | |
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter |
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | Next | Vol- | Vol+ | Play |
* `-----------------------------------------------------------------------------------'
@ -108,7 +108,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter |
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | Next | Vol- | Vol+ | Play |
* `-----------------------------------------------------------------------------------'
@ -211,4 +211,4 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
break;
}
return true;
}
}

@ -1,26 +0,0 @@
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
/* Use I2C or Serial, not both */
#define USE_SERIAL
// #define USE_I2C
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS
#define TAPPING_TERM 150
#undef RGBLED_NUM
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 8
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#endif

@ -1,5 +0,0 @@
RGBLIGHT_ENABLE = yes
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

@ -1,108 +0,0 @@
Hexwire's Let's Split Layout
============================
### Changes from default layout
- Main layer
- The right space bar key has been changed to backspace, as I only hit space with my left thumb
- Backtick is at the lower right and also serves goes to the 3rd function layer when held
- Enter key acts as shift when held
- Escape key acts as control when held
- Minus key at upper right
- Lower layer
- Numbers are on the lower layer, to make it easier to use a numpad on the right hand
- Arrow keys
- Straight and curly brackets in the middle two columns
- Screenshot keys for MacOS
- Upper layer
- Symbols are on the upper layer
- Media keys
- Page Up/Down, Home/End
- 3rd function layer
- Function keys
## Layouts
### Qwerty
```
,----+----+----+----+----+----. ,----+----+----+----+----+----.
TAB , Q , W , E , R , T , Y , U , I , O , P ,MINS,
|----+----+----+----+----+----| |----+----+----+----+----+----|
X0 , A , S , D , F , G , H , J , K , L ,SCLN,QUOT,
|----+----+----+----+----+----| |----+----+----+----+----+----|
LSFT, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, X4 ,
|----+----+----+----+----+----| |----+----+----+----+----+----|
X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
`----+----+----+----+----+----' `----+----+----+----+----+----'
```
### Colemak
```
,----+----+----+----+----+----. ,----+----+----+----+----+----.
TAB , Q , W , F , P , G , J , L , U , Y ,SCLN,MINS,
|----+----+----+----+----+----| |----+----+----+----+----+----|
X0 , A , R , S , T , D , H , N , E , I , O ,QUOT,
|----+----+----+----+----+----| |----+----+----+----+----+----|
LSFT, Z , X , C , V , B , K , M ,COMM,DOT ,SLSH, X4 ,
|----+----+----+----+----+----| |----+----+----+----+----+----|
X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
`----+----+----+----+----+----' `----+----+----+----+----+----'
```
### Dvorak
```
,----+----+----+----+----+----. ,----+----+----+----+----+----.
TAB ,QUOT,COMM,DOT , P , Y , F , G , C , R , L ,MINS,
|----+----+----+----+----+----| |----+----+----+----+----+----|
X0 , A , O , E , U , I , D , H , R , N , S ,SLSH,
|----+----+----+----+----+----| |----+----+----+----+----+----|
LSFT,SCLN, Q , J , K , X , B , M , W , V , Z , X4 ,
|----+----+----+----+----+----| |----+----+----+----+----+----|
X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
`----+----+----+----+----+----' `----+----+----+----+----+----'
```
### Lower
```
,----+----+----+----+----+----. ,----+----+----+----+----+----.
, 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , ,
|----+----+----+----+----+----| |----+----+----+----+----+----|
DEL ,CAPP,LEFT,RGHT, UP ,LBRC, RBRC, P4 , P5 , P6 ,PLUS,PIPE,
|----+----+----+----+----+----| |----+----+----+----+----+----|
,CPYP, , ,DOWN,LCBR, RCBR, P1 , P2 , P3 ,MINS, ,
|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , DEL , , P0 ,PDOT, ,
`----+----+----+----+----+----' `----+----+----+----+----+----'
```
### Raise
```
,----+----+----+----+----+----. ,----+----+----+----+----+----.
,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN, ,
|----+----+----+----+----+----| |----+----+----+----+----+----|
DEL ,MPRV,MNXT,VOLU,PGUP,UNDS, EQL ,HOME, , , ,BSLS,
|----+----+----+----+----+----| |----+----+----+----+----+----|
MUTE,MSTP,MPLY,VOLD,PGDN,MINS, PLUS,END , , , , ,
|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , , , , ,
`----+----+----+----+----+----' `----+----+----+----+----+----'
```
### 3rd function layer
```
,----+----+----+----+----+----. ,----+----+----+----+----+----.
F12 , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,
|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , , , , , ,
|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , , , , , ,
|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , , , , ,
`----+----+----+----+----+----' `----+----+----+----+----+----'
```

@ -1,206 +0,0 @@
#include "levinson.h"
#include "action_layer.h"
#include "eeconfig.h"
extern keymap_config_t keymap_config;
#define _QWERTY 0
#define _COLEMAK 1
#define _DVORAK 2
#define _LOWER 3
#define _RAISE 4
#define _FN3 5
#define _FN4 6
#define _ADJUST 16
enum custom_keycodes {
QWERTY = SAFE_RANGE,
COLEMAK,
DVORAK,
LOWER,
RAISE,
FN3,
FN4,
ADJUST,
};
#define KC_ KC_TRNS
#define _______ KC_TRNS
#define KC_CAPW LGUI(LSFT(KC_3)) // Capture whole screen
#define KC_CPYW LGUI(LSFT(LCTL(KC_3))) // Copy whole screen
#define KC_CAPP LGUI(LSFT(KC_4)) // Capture portion of screen
#define KC_CPYP LGUI(LSFT(LCTL(KC_4))) // Copy portion of screen
#define KC_X0 MT(MOD_LCTL, KC_ESC)
#define KC_X1 LOWER
#define KC_X2 RAISE
#define KC_X3 LT(_FN3, KC_GRV)
#define KC_X4 MT(MOD_LSFT, KC_ENT)
#define KC_X5 BL_STEP
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = KC_KEYMAP(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
TAB , Q , W , E , R , T , Y , U , I , O , P ,MINS,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
X0 , A , S , D , F , G , H , J , K , L ,SCLN,QUOT,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
LSFT, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, X4 ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
X5 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
//`----+----+----+----+----+----' `----+----+----+----+----+----'
),
[_COLEMAK] = KC_KEYMAP(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
TAB , Q , W , F , P , G , J , L , U , Y ,SCLN,MINS,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
X0 , A , R , S , T , D , H , N , E , I , O ,QUOT,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
LSFT, Z , X , C , V , B , K , M ,COMM,DOT ,SLSH, X4 ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
//`----+----+----+----+----+----' `----+----+----+----+----+----'
),
[_DVORAK] = KC_KEYMAP(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
TAB ,QUOT,COMM,DOT , P , Y , F , G , C , R , L ,MINS,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
X0 , A , O , E , U , I , D , H , T , N , S ,SLSH,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
LSFT,SCLN, Q , J , K , X , B , M , W , V , Z , X4 ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
//`----+----+----+----+----+----' `----+----+----+----+----+----'
),
[_LOWER] = KC_KEYMAP(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
, 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
DEL ,CAPP,LEFT,RGHT, UP ,LBRC, RBRC, P4 , P5 , P6 ,PLUS,PIPE,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
,CPYP, , ,DOWN,LCBR, RCBR, P1 , P2 , P3 ,MINS, ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , DEL , , P0 ,PDOT, ,
//`----+----+----+----+----+----' `----+----+----+----+----+----'
),
[_RAISE] = KC_KEYMAP(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN, ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
DEL ,MPRV,MNXT,VOLU,PGUP,UNDS, EQL ,HOME, , , ,BSLS,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
MUTE,MSTP,MPLY,VOLD,PGDN,MINS, PLUS,END , , , , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , , , , ,
//`----+----+----+----+----+----' `----+----+----+----+----+----'
),
[_FN3] = KC_KEYMAP(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
F12 , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , , , , , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , , , , , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , , , , ,
//`----+----+----+----+----+----' `----+----+----+----+----+----'
),
/* Adjust (Lower + Raise)
* ,-----------------------------------------------------------------------------------.
* | | Reset|RGB Tg|RGB Md|Hue Up|Hue Dn|Sat Up|Sat Dn|Val Up|Val Dn| | |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | | | | | | | | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------'
*/
[_ADJUST] = KEYMAP( \
_______, RESET , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, _______, \
_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
)
};
#ifdef AUDIO_ENABLE
float tone_qwerty[][2] = SONG(QWERTY_SOUND);
float tone_dvorak[][2] = SONG(DVORAK_SOUND);
float tone_colemak[][2] = SONG(COLEMAK_SOUND);
#endif
void persistent_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_SONG(tone_qwerty);
#endif
persistent_default_layer_set(1UL<<_QWERTY);
}
return false;
break;
case COLEMAK:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_SONG(tone_colemak);
#endif
persistent_default_layer_set(1UL<<_COLEMAK);
}
return false;
break;
case DVORAK:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_SONG(tone_dvorak);
#endif
persistent_default_layer_set(1UL<<_DVORAK);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
break;
}
return true;
}

@ -131,3 +131,45 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
return MACRO_NONE;
}
#ifdef RGBLIGHT_ENABLE
bool rgb_layer_change = true;
#endif
#define rgblight_set_blue rgblight_sethsv (0xFF, 0xFF, 0xFF);
#define rgblight_set_red rgblight_sethsv (0x00, 0xFF, 0xFF);
#define rgblight_set_green rgblight_sethsv (0x78, 0xFF, 0xFF);
#define rgblight_set_orange rgblight_sethsv (0x1E, 0xFF, 0xFF);
#define rgblight_set_teal rgblight_sethsv (0xC3, 0xFF, 0xFF);
#define rgblight_set_magenta rgblight_sethsv (0x12C, 0xFF, 0xFF);
#define rgblight_set_yellow rgblight_sethsv (0x3C, 0xFF, 0xFF);
#define rgblight_set_purple rgblight_sethsv (0x10E, 0xFF, 0xFF);
#define rgblight_set_white rgblight_sethsv (0x00, 0x00, 0xFF);
#define rgblight_set_black rgblight_sethsv (0x00, 0x00, 0x00);
uint32_t layer_state_set_user(uint32_t state) {
#ifdef RGBLIGHT_ENABLE
uint8_t default_layer = eeconfig_read_default_layer();
if (rgb_layer_change) {
switch (biton32(state)) {
case _LOWER:
rgblight_set_purple;
rgblight_mode(5);
break;
case _VIM:
rgblight_set_green;
rgblight_mode(23);
break;
case _GAME:
rgblight_mode(8);
break;
default:
if (default_layer & (1UL << _GAME)) {
}
else
rgblight_mode(14);
break;
}
}
#endif
return state;
}

@ -2,11 +2,7 @@
#define SPLIT_KEYBOARD_UTIL_H
#include <stdbool.h>
#ifdef EE_HANDS
#define EECONFIG_BOOTMAGIC_END (uint8_t *)10
#define EECONFIG_HANDEDNESS EECONFIG_BOOTMAGIC_END
#endif
#include "eeconfig.h"
#define SLAVE_I2C_ADDRESS 0x32

@ -2,11 +2,8 @@
#define SPLIT_KEYBOARD_UTIL_H
#include <stdbool.h>
#include "eeconfig.h"
#ifdef EE_HANDS
#define EECONFIG_BOOTMAGIC_END (uint8_t *)10
#define EECONFIG_HANDEDNESS EECONFIG_BOOTMAGIC_END
#endif
#define SLAVE_I2C_ADDRESS 0x32

@ -29,7 +29,22 @@
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \
}
// Used to create a keymap using only KC_ prefixed keys
#define KC_KEYMAP( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \
) \
LAYOUT_planck_grid( \
KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_##k06, KC_##k07, KC_##k08, KC_##k09, KC_##k0a, KC_##k0b, \
KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15, KC_##k16, KC_##k17, KC_##k18, KC_##k19, KC_##k1a, KC_##k1b, \
KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_##k26, KC_##k27, KC_##k28, KC_##k29, KC_##k2a, KC_##k2b, \
KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35, KC_##k36, KC_##k37, KC_##k38, KC_##k39, KC_##k3a, KC_##k3b \
)
#define KEYMAP LAYOUT_planck_grid
#define LAYOUT_ortho_4x12 LAYOUT_planck_grid
#define KC_LAYOUT_ortho_4x12 KC_KEYMAP
#endif

@ -2,11 +2,8 @@
#define SPLIT_KEYBOARD_UTIL_H
#include <stdbool.h>
#include "eeconfig.h"
#ifdef EE_HANDS
#define EECONFIG_BOOTMAGIC_END (uint8_t *)10
#define EECONFIG_HANDEDNESS EECONFIG_BOOTMAGIC_END
#endif
#define SLAVE_I2C_ADDRESS 0x32

@ -1,7 +1,7 @@
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
#include QMK_KEYBOARD_CONFIG_H
/* Use I2C or Serial, not both */

@ -1,4 +1,4 @@
#include "lets_split.h"
#include QMK_KEYBOARD_H
#include "action_layer.h"
#include "eeconfig.h"
@ -9,8 +9,7 @@ extern keymap_config_t keymap_config;
#define _DVORAK 2
#define _LOWER 3
#define _RAISE 4
#define _FN3 5
#define _FN4 6
#define _FKEYS 5
#define _ADJUST 16
enum custom_keycodes {
@ -19,8 +18,6 @@ enum custom_keycodes {
DVORAK,
LOWER,
RAISE,
FN3,
FN4,
ADJUST,
};
@ -31,51 +28,52 @@ enum custom_keycodes {
#define KC_CPYW LGUI(LSFT(LCTL(KC_3))) // Copy whole screen
#define KC_CAPP LGUI(LSFT(KC_4)) // Capture portion of screen
#define KC_CPYP LGUI(LSFT(LCTL(KC_4))) // Copy portion of screen
#define KC_X0 MT(MOD_LCTL, KC_ESC)
#define KC_X1 LOWER
#define KC_X2 RAISE
#define KC_X3 LT(_FN3, KC_GRV)
#define KC_X4 MT(MOD_LSFT, KC_ENT)
#define KC_ESCC MT(MOD_LCTL, KC_ESC)
#define KC_LOWR LOWER
#define KC_RASE RAISE
#define KC_GRVF LT(_FKEYS, KC_GRV)
#define KC_ENTS MT(MOD_LSFT, KC_ENT)
#define KC_BL_S BL_STEP
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = KC_KEYMAP(
[_QWERTY] = KC_LAYOUT_ortho_4x12(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
TAB , Q , W , E , R , T , Y , U , I , O , P ,MINS,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
X0 , A , S , D , F , G , H , J , K , L ,SCLN,QUOT,
ESCC, A , S , D , F , G , H , J , K , L ,SCLN,QUOT,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
LSFT, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, X4 ,
LSFT, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH,ENTS,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
GRVF,LCTL,LALT,LGUI,LOWR,SPC , BSPC,RASE,LEFT,DOWN, UP ,RGHT
//`----+----+----+----+----+----' `----+----+----+----+----+----'
),
[_COLEMAK] = KC_KEYMAP(
[_COLEMAK] = KC_LAYOUT_ortho_4x12(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
TAB , Q , W , F , P , G , J , L , U , Y ,SCLN,MINS,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
X0 , A , R , S , T , D , H , N , E , I , O ,QUOT,
ESCC, A , R , S , T , D , H , N , E , I , O ,QUOT,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
LSFT, Z , X , C , V , B , K , M ,COMM,DOT ,SLSH, X4 ,
LSFT, Z , X , C , V , B , K , M ,COMM,DOT ,SLSH,ENTS,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
GRVF,LCTL,LALT,LGUI,LOWR,SPC , BSPC,RASE,LEFT,DOWN, UP ,RGHT
//`----+----+----+----+----+----' `----+----+----+----+----+----'
),
[_DVORAK] = KC_KEYMAP(
[_DVORAK] = KC_LAYOUT_ortho_4x12(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
TAB ,QUOT,COMM,DOT , P , Y , F , G , C , R , L ,MINS,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
X0 , A , O , E , U , I , D , H , T , N , S ,SLSH,
ESCC, A , O , E , U , I , D , H , T , N , S ,SLSH,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
LSFT,SCLN, Q , J , K , X , B , M , W , V , Z , X4 ,
LSFT,SCLN, Q , J , K , X , B , M , W , V , Z ,ENTS,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
GRVF,LCTL,LALT,LGUI,LOWR,SPC , BSPC,RASE,LEFT,DOWN, UP ,RGHT
//`----+----+----+----+----+----' `----+----+----+----+----+----'
),
[_LOWER] = KC_KEYMAP(
[_LOWER] = KC_LAYOUT_ortho_4x12(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
, 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
@ -83,11 +81,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//|----+----+----+----+----+----| |----+----+----+----+----+----|
,CPYP, , ,DOWN,LCBR, RCBR, P1 , P2 , P3 ,MINS, ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , DEL , , P0 ,PDOT, ,
BL_S, , , , ,DEL , DEL , , P0 ,PDOT, ,
//`----+----+----+----+----+----' `----+----+----+----+----+----'
),
[_RAISE] = KC_KEYMAP(
[_RAISE] = KC_LAYOUT_ortho_4x12(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN, ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
@ -99,7 +97,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//`----+----+----+----+----+----' `----+----+----+----+----+----'
),
[_FN3] = KC_KEYMAP(
[_FKEYS] = KC_LAYOUT_ortho_4x12(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
F12 , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
@ -122,7 +120,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------'
*/
[_ADJUST] = KEYMAP( \
[_ADJUST] = LAYOUT_ortho_4x12( \
_______, RESET , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, _______, \
_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \

@ -1,4 +1,4 @@
Hexwire's Let's Split Layout
Bakingpy's Let's Split Layout
============================
### Changes from default layout
@ -29,11 +29,11 @@ Hexwire's Let's Split Layout
,----+----+----+----+----+----. ,----+----+----+----+----+----.
TAB , Q , W , E , R , T , Y , U , I , O , P ,MINS,
|----+----+----+----+----+----| |----+----+----+----+----+----|
X0 , A , S , D , F , G , H , J , K , L ,SCLN,QUOT,
ESCC, A , S , D , F , G , H , J , K , L ,SCLN,QUOT,
|----+----+----+----+----+----| |----+----+----+----+----+----|
LSFT, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, X4 ,
LSFT, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH,ENTS,
|----+----+----+----+----+----| |----+----+----+----+----+----|
X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
GRVF,LCTL,LALT,LGUI,LOWR,SPC , BSPC,RASE,LEFT,DOWN, UP ,RGHT
`----+----+----+----+----+----' `----+----+----+----+----+----'
```
@ -43,11 +43,11 @@ Hexwire's Let's Split Layout
,----+----+----+----+----+----. ,----+----+----+----+----+----.
TAB , Q , W , F , P , G , J , L , U , Y ,SCLN,MINS,
|----+----+----+----+----+----| |----+----+----+----+----+----|
X0 , A , R , S , T , D , H , N , E , I , O ,QUOT,
ESCC, A , R , S , T , D , H , N , E , I , O ,QUOT,
|----+----+----+----+----+----| |----+----+----+----+----+----|
LSFT, Z , X , C , V , B , K , M ,COMM,DOT ,SLSH, X4 ,
LSFT, Z , X , C , V , B , K , M ,COMM,DOT ,SLSH,ENTS,
|----+----+----+----+----+----| |----+----+----+----+----+----|
X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
GRVF,LCTL,LALT,LGUI,LOWR,SPC , BSPC,RASE,LEFT,DOWN, UP ,RGHT
`----+----+----+----+----+----' `----+----+----+----+----+----'
```
@ -57,11 +57,11 @@ Hexwire's Let's Split Layout
,----+----+----+----+----+----. ,----+----+----+----+----+----.
TAB ,QUOT,COMM,DOT , P , Y , F , G , C , R , L ,MINS,
|----+----+----+----+----+----| |----+----+----+----+----+----|
X0 , A , O , E , U , I , D , H , R , N , S ,SLSH,
ESCC, A , O , E , U , I , D , H , R , N , S ,SLSH,
|----+----+----+----+----+----| |----+----+----+----+----+----|
LSFT,SCLN, Q , J , K , X , B , M , W , V , Z , X4 ,
LSFT,SCLN, Q , J , K , X , B , M , W , V , Z ,ENTS,
|----+----+----+----+----+----| |----+----+----+----+----+----|
X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
GRVF,LCTL,LALT,LGUI,LOWR,SPC , BSPC,RASE,LEFT,DOWN, UP ,RGHT
`----+----+----+----+----+----' `----+----+----+----+----+----'
```
@ -75,7 +75,7 @@ Hexwire's Let's Split Layout
|----+----+----+----+----+----| |----+----+----+----+----+----|
,CPYP, , ,DOWN,LCBR, RCBR, P1 , P2 , P3 ,MINS, ,
|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , DEL , , P0 ,PDOT, ,
, , , , ,DEL , DEL , , P0 ,PDOT, ,
`----+----+----+----+----+----' `----+----+----+----+----+----'
```

@ -0,0 +1,4 @@
# Enable RGB if not a Planck
ifeq (,$(findstring planck,$(KEYBOARD)))
RGBLIGHT_ENABLE = yes
endif
Loading…
Cancel
Save