wanleg
7 years ago
committed by
Jack Humbert
parent
17200f4712
commit
492a16308a
@ -0,0 +1,61 @@
|
|||||||
|
#ifndef CONFIG_H
|
||||||
|
#define CONFIG_H
|
||||||
|
|
||||||
|
#include "config_common.h"
|
||||||
|
|
||||||
|
/* USB Device descriptor parameter */
|
||||||
|
#define VENDOR_ID 0xFEED
|
||||||
|
#define PRODUCT_ID 0x6060
|
||||||
|
#define DEVICE_VER 0x0001
|
||||||
|
#define MANUFACTURER 40 Percent Club
|
||||||
|
#define PRODUCT Gherkin
|
||||||
|
#define DESCRIPTION A 30 key ortholinear keyboard
|
||||||
|
|
||||||
|
/* key matrix size */
|
||||||
|
#define MATRIX_ROWS 5
|
||||||
|
#define MATRIX_COLS 6
|
||||||
|
|
||||||
|
/* key matrix pins */
|
||||||
|
#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 }
|
||||||
|
#define MATRIX_COL_PINS { B4, E6, D7, C6, D4, D0 }
|
||||||
|
#define UNUSED_PINS
|
||||||
|
|
||||||
|
/* COL2ROW or ROW2COL */
|
||||||
|
#define DIODE_DIRECTION COL2ROW
|
||||||
|
|
||||||
|
/* number of backlight levels */
|
||||||
|
#define BACKLIGHT_PIN B5
|
||||||
|
#ifdef BACKLIGHT_PIN
|
||||||
|
#define BACKLIGHT_LEVELS 3
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Set 0 if debouncing isn't needed */
|
||||||
|
#define DEBOUNCING_DELAY 5
|
||||||
|
|
||||||
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||||
|
#define LOCKING_SUPPORT_ENABLE
|
||||||
|
|
||||||
|
/* Locking resynchronize hack */
|
||||||
|
#define LOCKING_RESYNC_ENABLE
|
||||||
|
|
||||||
|
/* key combination for command */
|
||||||
|
#define IS_COMMAND() ( \
|
||||||
|
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||||
|
)
|
||||||
|
|
||||||
|
/* prevent stuck modifiers */
|
||||||
|
#define PREVENT_STUCK_MODIFIERS
|
||||||
|
|
||||||
|
/*tap dance definition */
|
||||||
|
#define TAPPING_TERM 200
|
||||||
|
|
||||||
|
|
||||||
|
#ifdef RGB_DI_PIN
|
||||||
|
#define RGBLIGHT_ANIMATIONS
|
||||||
|
#define RGBLED_NUM 0
|
||||||
|
#define RGBLIGHT_HUE_STEP 8
|
||||||
|
#define RGBLIGHT_SAT_STEP 8
|
||||||
|
#define RGBLIGHT_VAL_STEP 8
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
||||||
@ -0,0 +1,221 @@
|
|||||||
|
/* Copyright 2017 Brian Fong
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
#include "gherkin.h"
|
||||||
|
|
||||||
|
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||||
|
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||||
|
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||||
|
// entirely and just use numbers.
|
||||||
|
#define _QW 0
|
||||||
|
#define DIR 1
|
||||||
|
#define NUM 2
|
||||||
|
#define ETC 3
|
||||||
|
|
||||||
|
|
||||||
|
/////////////// TAP DANCE SECTION START ///////////////
|
||||||
|
//Tap Dance Declarations (list of my tap dance configurations)
|
||||||
|
enum {
|
||||||
|
TD_SFT_CAPS = 0
|
||||||
|
,TD_Q_ESC
|
||||||
|
,ENT_TAP_DANCE
|
||||||
|
,DEL_TAP_DANCE
|
||||||
|
};
|
||||||
|
|
||||||
|
///// QUAD FUNCTION TAP DANCE GENERAL SETUP SECTION START /////
|
||||||
|
///// (no need to edit this section) /////
|
||||||
|
//Enums used to clearly convey the state of the tap dance
|
||||||
|
enum {
|
||||||
|
SINGLE_TAP = 1,
|
||||||
|
SINGLE_HOLD = 2,
|
||||||
|
DOUBLE_TAP = 3,
|
||||||
|
DOUBLE_HOLD = 4,
|
||||||
|
DOUBLE_SINGLE_TAP = 5 //send SINGLE_TAP twice - NOT DOUBLE_TAP
|
||||||
|
// Add more enums here if you want for triple, quadruple, etc.
|
||||||
|
};
|
||||||
|
|
||||||
|
typedef struct {
|
||||||
|
bool is_press_action;
|
||||||
|
int state;
|
||||||
|
} tap;
|
||||||
|
|
||||||
|
int cur_dance (qk_tap_dance_state_t *state) {
|
||||||
|
if (state->count == 1) {
|
||||||
|
//If count = 1, and it has been interrupted - it doesn't matter if it is pressed or not: Send SINGLE_TAP
|
||||||
|
if (state->interrupted || !state->pressed) return SINGLE_TAP;
|
||||||
|
if (state->interrupted) return SINGLE_TAP;
|
||||||
|
else return SINGLE_HOLD;
|
||||||
|
}
|
||||||
|
//If count = 2, and it has been interrupted - assume that user is trying to type the letter associated
|
||||||
|
//with single tap.
|
||||||
|
else if (state->count == 2) {
|
||||||
|
if (state->interrupted) return DOUBLE_SINGLE_TAP;
|
||||||
|
else if (state->pressed) return DOUBLE_HOLD;
|
||||||
|
else return DOUBLE_TAP;
|
||||||
|
}
|
||||||
|
else return 6; //magic number. At some point this method will expand to work for more presses
|
||||||
|
}
|
||||||
|
///// QUAD FUNCTION TAP DANCE GENERAL SETUP SECTION END /////
|
||||||
|
///// QUAD FUNCTION TAP DANCE PERSONALIZATION SECTION START /////
|
||||||
|
//instantialize an instance of 'tap' for the 'ENT' tap dance.
|
||||||
|
static tap ENTtap_state = {
|
||||||
|
.is_press_action = true,
|
||||||
|
.state = 0
|
||||||
|
};
|
||||||
|
|
||||||
|
void ENT_finished (qk_tap_dance_state_t *state, void *user_data) {
|
||||||
|
ENTtap_state.state = cur_dance(state);
|
||||||
|
switch (ENTtap_state.state) {
|
||||||
|
case SINGLE_TAP: register_code(KC_SPC); break;
|
||||||
|
case SINGLE_HOLD: register_code(KC_LSFT); break;
|
||||||
|
case DOUBLE_TAP: register_code(KC_ENT); break;
|
||||||
|
case DOUBLE_HOLD: register_code(KC_NO); break; // setting double hold to do nothing (change this if you want)
|
||||||
|
case DOUBLE_SINGLE_TAP: register_code(KC_SPC); unregister_code(KC_SPC); register_code(KC_SPC);
|
||||||
|
//Last case is for fast typing. Assuming your key is `f`:
|
||||||
|
//For example, when typing the word `buffer`, and you want to make sure that you send `ff` and not `Esc`.
|
||||||
|
//In order to type `ff` when typing fast, the next character will have to be hit within the `TAPPING_TERM`, which by default is 200ms.
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void ENT_reset (qk_tap_dance_state_t *state, void *user_data) {
|
||||||
|
switch (ENTtap_state.state) {
|
||||||
|
case SINGLE_TAP: unregister_code(KC_SPC); break;
|
||||||
|
case SINGLE_HOLD: unregister_code(KC_LSFT); break;
|
||||||
|
case DOUBLE_TAP: unregister_code(KC_ENT); break;
|
||||||
|
case DOUBLE_HOLD: unregister_code(KC_NO);
|
||||||
|
case DOUBLE_SINGLE_TAP: unregister_code(KC_SPC);
|
||||||
|
}
|
||||||
|
ENTtap_state.state = 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
//instanalize an instance of 'tap' for the 'DEL' tap dance.
|
||||||
|
static tap DELtap_state = {
|
||||||
|
.is_press_action = true,
|
||||||
|
.state = 0
|
||||||
|
};
|
||||||
|
|
||||||
|
void DEL_finished (qk_tap_dance_state_t *state, void *user_data) {
|
||||||
|
DELtap_state.state = cur_dance(state);
|
||||||
|
switch (DELtap_state.state) {
|
||||||
|
case SINGLE_TAP: register_code(KC_BSPC); break;
|
||||||
|
case SINGLE_HOLD: register_code(KC_LCTL); break;
|
||||||
|
case DOUBLE_TAP: register_code(KC_DEL); break;
|
||||||
|
case DOUBLE_HOLD: register_code(KC_NO); break;
|
||||||
|
case DOUBLE_SINGLE_TAP: register_code(KC_BSPC); unregister_code(KC_BSPC); register_code(KC_BSPC);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void DEL_reset (qk_tap_dance_state_t *state, void *user_data) {
|
||||||
|
switch (DELtap_state.state) {
|
||||||
|
case SINGLE_TAP: unregister_code(KC_BSPC); break;
|
||||||
|
case SINGLE_HOLD: unregister_code(KC_LCTL); break;
|
||||||
|
case DOUBLE_TAP: unregister_code(KC_DEL); break;
|
||||||
|
case DOUBLE_HOLD: unregister_code(KC_NO);
|
||||||
|
case DOUBLE_SINGLE_TAP: unregister_code(KC_BSPC);
|
||||||
|
}
|
||||||
|
DELtap_state.state = 0;
|
||||||
|
}
|
||||||
|
///// QUAD FUNCTION TAP DANCE PERSONALIZATION SECTION END /////
|
||||||
|
|
||||||
|
//Tap Dance Definitions
|
||||||
|
//THIS SECTION HAS TO BE AT THE END OF THE TAP DANCE SECTION
|
||||||
|
qk_tap_dance_action_t tap_dance_actions[] = {
|
||||||
|
[TD_SFT_CAPS] = ACTION_TAP_DANCE_DOUBLE(KC_LSFT, KC_CAPS)
|
||||||
|
// Other declarations would go here, separated by commas, if you have them
|
||||||
|
,[TD_Q_ESC] = ACTION_TAP_DANCE_DOUBLE(KC_Q, KC_ESC)
|
||||||
|
,[ENT_TAP_DANCE] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, ENT_finished, ENT_reset)
|
||||||
|
,[DEL_TAP_DANCE] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, DEL_finished, DEL_reset)
|
||||||
|
};
|
||||||
|
|
||||||
|
//In Layer declaration, add tap dance item in place of a key code
|
||||||
|
//TD(TD_SFT_CAPS)
|
||||||
|
|
||||||
|
///////////// TAP DANCE SECTION END ///////////////
|
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
|
||||||
|
/* Qwerty
|
||||||
|
* .-----------------------------------------------------------------------------------------.
|
||||||
|
* | Q//ESC | W | E | R | T | Y | U | I | O | P |
|
||||||
|
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
|
||||||
|
* | A | S | D | F | G | H | J | K | L | ENTER |
|
||||||
|
* | | | | | | | | | |SFThold |
|
||||||
|
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
|
||||||
|
* | Z | X | C | V/NUM | B/ETC | N | M/DIR | ,/GUI | ./ALT | BKSC |
|
||||||
|
* | SFThold| | | | | | | | |CTRLhold|
|
||||||
|
* '-----------------------------------------------------------------------------------------'
|
||||||
|
*/
|
||||||
|
|
||||||
|
[_QW] = KEYMAP( /* Qwerty*/
|
||||||
|
TD(TD_Q_ESC), KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,
|
||||||
|
KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, SFT_T(KC_SPC),
|
||||||
|
SFT_T(KC_Z), KC_X, KC_C, LT(NUM, KC_V), LT(ETC, KC_B), KC_N, LT(DIR, KC_M), GUI_T(KC_COMM), ALT_T(KC_DOT), CTL_T(KC_BSPC)
|
||||||
|
),
|
||||||
|
|
||||||
|
|
||||||
|
//
|
||||||
|
///*
|
||||||
|
// * Directional Modifiers
|
||||||
|
// * .-----------------------------------------------------------------------------------------.
|
||||||
|
// * | TAB | up | | INS | CTRL | SHIFT | PgUp | HOME | - | = |
|
||||||
|
// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
|
||||||
|
// * | left | down | right | PrScr | SHIFT | CTRL | PgDn | END | [ | ] |
|
||||||
|
// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
|
||||||
|
// * | | | | | | | | | ALT | / |
|
||||||
|
// * '-----------------------------------------------------------------------------------------'
|
||||||
|
// */
|
||||||
|
//
|
||||||
|
[DIR] = KEYMAP( /* Directional Modifiers */
|
||||||
|
KC_TAB, KC_UP, KC_TRNS, KC_INS, KC_LCTL, KC_RSFT, KC_PGUP, KC_HOME, KC_MINS, KC_EQL ,
|
||||||
|
KC_LEFT, KC_DOWN, KC_RGHT, KC_PSCR, KC_LSFT, KC_RCTL, KC_PGDN, KC_END, KC_LBRC, KC_RBRC ,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_RALT, KC_SLSH
|
||||||
|
),
|
||||||
|
//
|
||||||
|
// /*
|
||||||
|
// * Numbers
|
||||||
|
// * .-----------------------------------------------------------------------------------------.
|
||||||
|
// * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 |
|
||||||
|
// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
|
||||||
|
// * | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 |
|
||||||
|
// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
|
||||||
|
// * | F11 | F12 | | | | ENTER | SHIFT | GUI | ./ALT | BKSC |
|
||||||
|
// * | | | | | | | | | |CTRLhold|
|
||||||
|
// * '-----------------------------------------------------------------------------------------'
|
||||||
|
// */
|
||||||
|
//
|
||||||
|
[NUM] = KEYMAP ( /* Numbers */
|
||||||
|
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10 ,
|
||||||
|
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0 ,
|
||||||
|
KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT, KC_RSFT, KC_RGUI, ALT_T(KC_DOT), CTL_T(KC_BSPC)
|
||||||
|
),
|
||||||
|
//
|
||||||
|
//
|
||||||
|
// /*
|
||||||
|
// * ETC
|
||||||
|
// * .-----------------------------------------------------------------------------------------.
|
||||||
|
// * | ` | | | | | | | | | \ |
|
||||||
|
// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
|
||||||
|
// * | CAPS | P-Brk | | | | | | | ; | ' |
|
||||||
|
// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
|
||||||
|
// * | SHIFT | | | | | C-A-D | | GUI | | DEL |
|
||||||
|
// * '-----------------------------------------------------------------------------------------'
|
||||||
|
// */
|
||||||
|
//
|
||||||
|
[ETC] = KEYMAP( /* ETC */
|
||||||
|
KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS ,
|
||||||
|
KC_CAPS, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SCLN, KC_QUOT ,
|
||||||
|
KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, LALT(LCTL(KC_DEL)), KC_TRNS, KC_RGUI, KC_TRNS, KC_DEL
|
||||||
|
),
|
||||||
|
};
|
||||||
@ -0,0 +1,12 @@
|
|||||||
|
|
||||||
|
|
||||||
|
# Gherkin Wanleg Layout
|
||||||
|
|
||||||
|
Here is the layout I came up with to preserve a standard QWERTY layout as much as possible, in as few layers as possible for a 30 key board.
|
||||||
|
I originally set up a few Tap Dance keys, but eventually dropped most of them in favor of chorded versions, since in actual use, they tended to impede typing speed more than their (current) two-key versions.
|
||||||
|
I've left them in my layout ready for use if anyone wants to try them out:
|
||||||
|
Single tap - Double tap - Hold
|
||||||
|
space - enter - shift
|
||||||
|
backspace - delete - control
|
||||||
|
shift - caps lock - XXXX
|
||||||
|
KC_Q - escape - XXXX
|
||||||
@ -0,0 +1,63 @@
|
|||||||
|
# MCU name
|
||||||
|
MCU = atmega32u4
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 16000000
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task(+60)
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
|
||||||
|
# Boot Section Size in *bytes*
|
||||||
|
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||||
|
|
||||||
|
# Bootloader
|
||||||
|
# This definition is optional, and if your keyboard supports multiple bootloaders of
|
||||||
|
# different sizes, comment this out, and the correct address will be loaded
|
||||||
|
# automatically (+60). See bootloader.mk for all options.
|
||||||
|
BOOTLOADER = caterina
|
||||||
|
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# comment out to disable the options.
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
|
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||||
|
AUDIO_ENABLE = no
|
||||||
|
RGBLIGHT_ENABLE = no
|
||||||
|
TAP_DANCE_ENABLE = yes # Enable Tap Dance (comment if not being implemented)
|
||||||
Loading…
Reference in New Issue