homebrew instructions

example_keyboards
Jack Humbert 9 years ago
parent 4b0c54324a
commit 39915b1748

@ -8,6 +8,14 @@
3. Start DFU bootloader on the chip first time you will see 'Found New Hardware Wizard' to install driver. If you install device driver properly you can find chip name like 'ATmega32U4' under 'LibUSB-Win32 Devices' tree on 'Device Manager'. If not you will need to update its driver on 'Device Manager' to the `dfu-programmer` driver. 3. Start DFU bootloader on the chip first time you will see 'Found New Hardware Wizard' to install driver. If you install device driver properly you can find chip name like 'ATmega32U4' under 'LibUSB-Win32 Devices' tree on 'Device Manager'. If not you will need to update its driver on 'Device Manager' to the `dfu-programmer` driver.
### Mac ### Mac
If you're using homebrew, you can use the following commands:
brew tap osx-cross/avr
brew install avr-libc
Otherwise, these instructions will work:
1. Install Xcode from the App Store. 1. Install Xcode from the App Store.
2. Install the Command Line Tools from `Xcode->Preferences->Downloads`. 2. Install the Command Line Tools from `Xcode->Preferences->Downloads`.
3. Install [DFU-Programmer][dfu-prog]. 3. Install [DFU-Programmer][dfu-prog].

@ -24,6 +24,7 @@
#define CM_E KC_K #define CM_E KC_K
#define CM_I KC_L #define CM_I KC_L
#define CM_O KC_SCLN #define CM_O KC_SCLN
#define CM_SCLN LSFT(CM_SCLN)
#define CM_Z KC_Z #define CM_Z KC_Z
#define CM_X KC_X #define CM_X KC_X

Loading…
Cancel
Save