Added Chimera Ortho keymap

subvendor_ids 0.5.144
William Wilson 7 years ago committed by Jack Humbert
parent 8c10b60c5f
commit 38da7795f4

@ -0,0 +1,31 @@
#include "chimera_ortho.h"
void uart_init(void) {
SERIAL_UART_INIT();
}
void led_init(void) {
DDRD |= (1<<1);
PORTD |= (1<<1);
DDRF |= (1<<4) | (1<<5);
PORTF |= (1<<4) | (1<<5);
}
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
uart_init();
led_init();
}
void matrix_scan_kb(void) {
// put your looping keyboard code here
// runs every cycle (a lot)
matrix_scan_user();
}
void led_set_kb(uint8_t usb_led) {
}

@ -0,0 +1,66 @@
#ifndef CHIMERA_ORTHO_H
#define CHIMERA_ORTHO_H
#include "quantum.h"
#include "matrix.h"
#include "backlight.h"
#include <stddef.h>
#define red_led_off PORTF |= (1<<5)
#define red_led_on PORTF &= ~(1<<5)
#define blu_led_off PORTF |= (1<<4)
#define blu_led_on PORTF &= ~(1<<4)
#define grn_led_off PORTD |= (1<<1)
#define grn_led_on PORTD &= ~(1<<1)
#define set_led_off red_led_off; grn_led_off; blu_led_off
#define set_led_red red_led_on; grn_led_off; blu_led_off
#define set_led_blue red_led_off; grn_led_off; blu_led_on
#define set_led_green red_led_off; grn_led_on; blu_led_off
#define set_led_yellow red_led_on; grn_led_on; blu_led_off
#define set_led_magenta red_led_on; grn_led_off; blu_led_on
#define set_led_cyan red_led_off; grn_led_on; blu_led_on
#define set_led_white red_led_on; grn_led_on; blu_led_on
/*
#define LED_B 5
#define LED_R 6
#define LED_G 7
#define all_leds_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
#define red_led_on PORTF |= (1<<LED_R)
#define red_led_off PORTF &= ~(1<<LED_R)
#define grn_led_on PORTF |= (1<<LED_G)
#define grn_led_off PORTF &= ~(1<<LED_G)
#define blu_led_on PORTF |= (1<<LED_B)
#define blu_led_off PORTF &= ~(1<<LED_B)
#define set_led_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
#define set_led_red PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_G) | (1<<LED_R)
#define set_led_blue PORTF = PORTF & ~(1<<LED_G) & ~(1<<LED_R) | (1<<LED_B)
#define set_led_green PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_R) | (1<<LED_G)
#define set_led_yellow PORTF = PORTF & ~(1<<LED_B) | (1<<LED_R) | (1<<LED_G)
#define set_led_magenta PORTF = PORTF & ~(1<<LED_G) | (1<<LED_R) | (1<<LED_B)
#define set_led_cyan PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G)
#define set_led_white PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G)
*/
// This a shortcut to help you visually see your layout.
// The first section contains all of the arguements
// The second converts the arguments into a two-dimensional array
#define KEYMAP( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, \
k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, \
k28, k29, k31, k32, k33, k34, k35, k36, k37, k38, k41, k42, k43, k44,\
k45, k46, k47, k48 \
) \
{ \
{ KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_##k08, KC_##k09, KC_##k10, KC_##k11, KC_##k12 }, \
{ KC_##k15, KC_##k16, KC_##k17, KC_##k18, KC_##k19, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_##k26 }, \
{ KC_##k29, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k37, KC_##k38, KC_##k41, KC_##k42, KC_##k43 }, \
{ KC_NO, KC_##k06, KC_##k20, KC_##k35, KC_##k46, KC_##k47, KC_##k36, KC_##k21, KC_##k07, KC_NO }, \
{ KC_NO, KC_##k28, KC_##k14, KC_##k00, KC_##k45, KC_##k48, KC_##k13, KC_##k27, KC_##k44, KC_NO }, \
}
#endif

@ -0,0 +1,87 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER unknown
#define PRODUCT Chimera Ortho
#define DESCRIPTION q.m.k. keyboard firmware for Chimera Ortho
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 10
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
//#define BACKLIGHT_LEVELS 3
#define ONESHOT_TIMEOUT 500
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
#define PREVENT_STUCK_MODIFIERS
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
//UART settings for communication with the RF microcontroller
#define SERIAL_UART_BAUD 1000000
#define SERIAL_UART_DATA UDR1
#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
#define SERIAL_UART_INIT() do { \
/* baud rate */ \
UBRR1L = SERIAL_UART_UBRR; \
/* baud rate */ \
UBRR1H = SERIAL_UART_UBRR >> 8; \
/* enable TX and RX */ \
UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
/* 8-bit data */ \
UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
} while(0)
#endif

@ -0,0 +1,193 @@
// this is the style you want to emulate.
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
#include "chimera_ortho.h"
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
enum chimera_ortho_layers
{
_QWERTY,
_CAPS,
_NUMPAD,
_SYMBOLS,
_MACROS,
_NAV
};
#define KC_NMPD TG(_NUMPAD)
#define KC_SYMB TG(_SYMBOLS)
#define KC_SPFN LT(_NAV,KC_EQL)
#define KC_SCTL MT(MOD_LCTL, KC_LBRC)
#define KC_SCTR MT(MOD_LCTL, KC_RBRC)
#define KC_SPLT MT(MOD_LALT, KC_MINS)
#define KC_SPRT MT(MOD_LALT, KC_1)
#define KC_GBRC MT(MOD_RGUI, KC_8)
#define KC_GQOT MT(MOD_LGUI, KC_QUOT)
#define KC_MESC LT(_MACROS, KC_ESC)
#define KC_INCL M(0)
#define KC_PULL M(1)
#define KC_PUSH M(2)
#define KC_SCAP M(3)
#define KC_SCOF M(4)
#define KC_CAD LALT(LCTL(KC_DEL))
#define LONGPRESS_DELAY 150
//#define LAYER_TOGGLE_DELAY 300
// Fillers to make layering more clear
#define _______ KC_TRNS
#define XXXXXXX KC_NO
#define KC_ KC_TRNS
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = KEYMAP(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
MESC, Q , W , E , R , T ,SCTL, SCTR, Y , U , I , O , P ,QUOT,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
TAB , A , S , D , F , G ,SPLT, SPRT, H , J , K , L ,SCLN,ENT ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
LSPO, Z , X , C , V , B ,SPFN, GBRC, N , M ,COMM,DOT ,SLSH,RSPC,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
NMPD,BSPC, SPC ,SYMB
// \------------------+----+----+---/ \---+----+----+-------------------/
),
[_CAPS] = KEYMAP(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
, , , , , , , , , , , , , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , , ,UNDS, , , , , ,COLN, ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
SCOF, , , , , , , , , , , , ,SCOF,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , ,
// \------------------+----+----+---/ \---+----+----+-------------------/
),
[_NUMPAD] = KEYMAP(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
, ,COLN , , , , , , , 7 , 8 , 9 ,ASTR,MINS,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, ,DOT , , , , , , , 4 , 5 , 6 ,PLUS, ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , , , , , , 1 , 2 , 3 ,SLSH, ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , 0
// \------------------+----+----+---/ \---+----+----+-------------------/
),
[_SYMBOLS] = KEYMAP(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
,EXLM, AT ,HASH,DLR ,PERC, , ,CIRC,AMPR,ASTR,LPRN,RPRN,BSLS,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, F1 , F2 , F3 , F4 , F5 , , ,TILD,COLN,UNDS,LCBR,RCBR, ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, F6 , F7 , F8 , F9 ,F10 , , ,GRV ,SCLN,MINS,LBRC,RBRC, ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
PIPE, , ,
// \------------------+----+----+---/ \---+----+----+-------------------/
),
[_NAV] = KEYMAP(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
, , , , , , , , , , UP , ,PSCR, ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , , , , , ,LEFT,DOWN,RGHT, , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , , , , , ,PGUP,PGDN, , , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
,DEL , ,
// \------------------+----+----+---/ \---+----+----+-------------------/
),
[_MACROS] = KEYMAP(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
, , , , , , , , , ,INCL, , , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , ,CAD , , , , , , , , , , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
SCAP, , , , , , , , , ,PULL,PUSH, ,SCAP,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , ,
// \------------------+----+----+---/ \---+----+----+-------------------/
)
};
const uint16_t PROGMEM fn_actions[] = {
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
switch(id) {
/* include some kind of library or header */
case 0:
if (record->event.pressed) {
SEND_STRING("#include <>");
return MACRO( T(LEFT), END);
}
break;
case 1:
if (record->event.pressed) {
SEND_STRING("git pull");
return MACRO( T(ENT), END );
}
break;
case 2:
if (record->event.pressed){
SEND_STRING("git push");
return MACRO( T(ENT), END );
}
break;
case 3:
if (record->event.pressed){
layer_on(_CAPS);
register_code(KC_CAPSLOCK);
unregister_code(KC_CAPSLOCK);
}
break;
case 4:
if (record->event.pressed){
layer_off(_CAPS);
register_code(KC_CAPSLOCK);
unregister_code(KC_CAPSLOCK);
}
break;
}
return MACRO_NONE;
};
void matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
switch (layer) {
case _QWERTY:
set_led_green;
break;
case _CAPS:
set_led_white;
break;
case _NUMPAD:
set_led_blue;
break;
case _SYMBOLS:
set_led_red;
break;
case _NAV:
set_led_magenta;
break;
case _MACROS:
set_led_cyan;
break;
default:
set_led_green;
break;
}
};

@ -0,0 +1,164 @@
/*
Copyright 2012 Jun Wako
Copyright 2014 Jack Humbert
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <stdbool.h>
#if defined(__AVR__)
#include <avr/io.h>
#endif
#include "wait.h"
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#include "timer.h"
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
# define matrix_bitpop(i) bitpop(matrix[i])
# define ROW_SHIFTER ((uint8_t)1)
#elif (MATRIX_COLS <= 16)
# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
# define matrix_bitpop(i) bitpop16(matrix[i])
# define ROW_SHIFTER ((uint16_t)1)
#elif (MATRIX_COLS <= 32)
# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
# define matrix_bitpop(i) bitpop32(matrix[i])
# define ROW_SHIFTER ((uint32_t)1)
#endif
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
__attribute__ ((weak))
void matrix_init_quantum(void) {
matrix_init_kb();
}
__attribute__ ((weak))
void matrix_scan_quantum(void) {
matrix_scan_kb();
}
__attribute__ ((weak))
void matrix_init_kb(void) {
matrix_init_user();
}
__attribute__ ((weak))
void matrix_scan_kb(void) {
matrix_scan_user();
}
__attribute__ ((weak))
void matrix_init_user(void) {
}
__attribute__ ((weak))
void matrix_scan_user(void) {
}
inline
uint8_t matrix_rows(void) {
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void) {
return MATRIX_COLS;
}
void matrix_init(void) {
matrix_init_quantum();
}
uint8_t matrix_scan(void)
{
SERIAL_UART_INIT();
uint32_t timeout = 0;
//the s character requests the RF slave to send the matrix
SERIAL_UART_DATA = 's';
//trust the external keystates entirely, erase the last data
uint8_t uart_data[11] = {0};
//there are 10 bytes corresponding to 10 columns, and an end byte
for (uint8_t i = 0; i < 11; i++) {
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
while(!SERIAL_UART_RXD_PRESENT){
timeout++;
if (timeout > 10000){
break;
}
}
uart_data[i] = SERIAL_UART_DATA;
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
//will only show up here if the correct bytes were recieved
if (uart_data[10] == 0xE0)
{
//shifting and transferring the keystates to the QMK matrix variable
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5;
}
}
matrix_scan_quantum();
return 1;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<col));
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print_matrix_header();
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
phex(row); print(": ");
print_matrix_row(row);
print("\n");
}
}
uint8_t matrix_key_count(void)
{
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += matrix_bitpop(i);
}
return count;
}

@ -0,0 +1,78 @@
OPT_DEFS += -DCHIMERA_ORTHO_PROMICRO
OPT_DEFS += -DCATERINA_BOOTLOADER
CHIMERA_ORTHO_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
# # project specific files
SRC = matrix.c
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
# MIDI_ENABLE = YES # MIDI controls
UNICODE_ENABLE = YES # Unicode
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
USB = /dev/ttyACM0
Loading…
Cancel
Save