initial commit for the AMJ60 PCB

example_keyboards
Toni 8 years ago
parent 8144ce8852
commit 387bd772e1

@ -0,0 +1,70 @@
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
CONSOLE_ENABLE ?= yes # Console for debug(+400)
COMMAND_ENABLE ?= yes # Commands for debug and configuration
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870)
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150)
MIDI_ENABLE ?= no # MIDI controls
AUDIO_ENABLE ?= no
UNICODE_ENABLE ?= no # Unicode
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
ifndef QUANTUM_DIR
include ../../Makefile
endif

@ -0,0 +1,30 @@
#include "amj60.h"
#include "led.h"
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
led_init_ports();
};
void matrix_scan_kb(void) {
// put your looping keyboard code here
// runs every cycle (a lot)
matrix_scan_user();
};
void led_init_ports(void) {
// * Set our LED pins as output
DDRB |= (1<<2);
}
void led_set_kb(uint8_t usb_led) {
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
// Turn capslock on
PORTB &= ~(1<<2);
} else {
// Turn capslock off
PORTB |= (1<<2);
}
}

@ -0,0 +1,153 @@
#ifndef AMJ60_H
#define AMJ60_H
#include "quantum.h"
// readability
#define XXX KC_NO
/* AMJ60 layout to the best of my knowledge matrix layout
* ,-----------------------------------------------------------.
* | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d| 49|
* |-----------------------------------------------------------|
* | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d |
* |-----------------------------------------------------------|
* | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d |
* |-----------------------------------------------------------|
* | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3c | 3d |
* |-----------------------------------------------------------|
* | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d |
* `-----------------------------------------------------------'
*/
#define KEYMAP( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49,\
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
k40, k41, k42, k45, k4a, k4b, k4c, k4d \
) \
{ \
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d} \
}
/*
* ANSI
* ,-----------------------------------------------------------.
* | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d |
* |-----------------------------------------------------------|
* | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d |
* |-----------------------------------------------------------|
* | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d |
* |-----------------------------------------------------------|
* | 30 | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d |
* |-----------------------------------------------------------|
* | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d |
* `-----------------------------------------------------------'
*/
#define KEYMAP_ANSI( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, \
k40, k41, k42, k45, k4a, k4b, k4c, k4d \
) \
{ \
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \
{k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, XXX, k3d}, \
{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d} \
}
/* AMJ60 HHKB matrix layout
* ,------------------------------------------------------------.
* | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d| 49 |
* |------------------------------------------------------------|
* | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d |
* |------------------------------------------------------------|
* | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d |
* |------------------------------------------------------------|
* | 30 | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | 3c |
* |------------------------------------------------------------|
* | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d |
* `------------------------------------------------------------'
*/
#define KEYMAP_HHKB( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49, \
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \
k40, k41, k42, k45, k4a, k4b, k4c, k4d \
) \
{ \
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \
{k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d} \
}
/* ISO
* ,-----------------------------------------------------------.
* | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d |
* |-----------------------------------------------------------|
* | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d |
* |-----------------------------------------------------------|
* | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|2d |
* |-----------------------------------------------------------|
* | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d |
* |-----------------------------------------------------------|
* | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d |
* `-----------------------------------------------------------'
*/
#define KEYMAP_ISO( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, \
k40, k41, k42, k45, k4a, k4b, k4c, k4d \
) \
{ \
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX}, \
{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d} \
}
/* ISO w/ split right shift key matrix layout
* ,-----------------------------------------------------------.
* | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d |
* |-----------------------------------------------------------|
* | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d |
* |-----------------------------------------------------------|
* | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|2d |
* |-----------------------------------------------------------|
* | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | 3c |
* |-----------------------------------------------------------|
* | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d |
* `-----------------------------------------------------------'
*/
#define KEYMAP_ISO_SPLITRSHIFT( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \
k40, k41, k42, k45, k4a, k4b, k4c, k4d \
) \
{ \
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d} \
}
void matrix_init_user(void);
void matrix_scan_user(void);
#endif

@ -0,0 +1,94 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6066
#define DEVICE_VER 0x0001
#define MANUFACTURER Han Chen
#define PRODUCT AMJ60
#define DESCRIPTION qmk port of AMJ60 PCB
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 14
// ROWS: Top to bottom, COLS: Left to right
#define MATRIX_ROW_PINS { F7, F6, F5, F4, D5}
#define MATRIX_COL_PINS { F1, F0, E6, C7, C6, B0, D4, B1, B7, B5, B4, D7, D6, B3}
#define UNUSED_PINS
#define BACKLIGHT_PIN B6
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* Backlight configuration
*/
#define BACKLIGHT_LEVELS 4
/* Underlight configuration
*/
#define RGB_DI_PIN E2
#define RGBLIGHT_TIMER
#define RGBLED_NUM 8 // Number of LEDs
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif

@ -0,0 +1,23 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

@ -0,0 +1,42 @@
#!/bin/bash
# adjust for cpu
# -j 16 gave best result on a hyperthreaded quad core core i7
LIMIT=10
THREADS="-j 16"
KMAP=iso_split_rshift
echo "We need sudo later"
sudo ls 2>&1 /dev/null
function wait_bootloader {
echo "Waiting for Bootloader..."
local STARTTIME=$(date +"%s")
local REMIND=0
local EXEC=dfu-programmer
local TARGET=atmega32u4
while true
do
sudo $EXEC $TARGET get > /dev/null 2>&1
[ $? -eq 0 ] && break
ENDTIME=$(date +"%s")
DURATION=$(($ENDTIME-$STARTTIME))
if [ $REMIND -eq 0 -a $DURATION -gt $LIMIT ]
then
echo "Did you forget to press the reset button?"
REMIND=1
fi
sleep 1
done
}
make clean
make KEYMAP=${KMAP} ${THREADS}
if [[ $? -eq 0 ]]
then
echo "please trigger flashing!"
wait_bootloader
sudo make KEYMAP=${KMAP} dfu ${THREADS}
else
echo "make failed"
exit 77
fi

@ -0,0 +1,147 @@
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
// this is the style you want to emulate.
#include "amj60.h"
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _DEF 0
#define _SPC 1
#define _TAB 2
#define _SFX 3
// dual-role shortcuts
#define TABDUAL LT(_TAB, KC_TAB)
#define CAPSDUAL CTL_T(KC_ESC)
#define SPACEDUAL LT(_SPC, KC_SPACE)
#define ENTERDUAL CTL_T(KC_ENT)
// arrow cluster duality bottom right corner
#define ARRLEFT ALT_T(KC_LEFT)
#define ARRDOWN GUI_T(KC_DOWN)
#define ARRUP SFT_T(KC_UP)
#define ARRRIGHT CTL_T(KC_RIGHT)
// german brackets
#define GER_CUR_L RALT(KC_7) // [
#define GER_CUR_R RALT(KC_0) // ]
#define GER_PAR_L LSFT(KC_8) // (
#define GER_PAR_R LSFT(KC_9) // )
#define GER_ANG_L KC_NUBS // <
#define GER_ANG_R LSFT(KC_NUBS) // >
#define GER_BRC_L RALT(KC_8) // [
#define GER_BRC_R RALT(KC_9) // ]
// increase readability
#define _______ KC_TRNS
#define XXXXXXX KC_NO
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap _DEF: Default Layer
* ,-----------------------------------------------------------.
* |Grv| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |
* |-----------------------------------------------------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | Tab is Fn1
* |-----------------------------------------------------------|
* |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| Return |
* |-----------------------------------------------------------|
* |Sft | < | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn2| RShift is UP
* |-----------------------------------------------------------|
* |Ctrl|Win |Alt | Space/Fn0 |Alt |Win |Menu|RCtl| Gui Menu, RCtrl is
* `-----------------------------------------------------------' LEFT DWN RIGHT
*/
[_DEF] = KEYMAP_ISO_SPLITRSHIFT(
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
TABDUAL, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
CAPSDUAL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, ENTERDUAL, \
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, ARRUP, TG(_SFX), \
KC_LCTL, KC_LGUI, KC_LALT, SPACEDUAL, KC_RALT, ARRLEFT, ARRDOWN, ARRRIGHT),
/* Keymap 1: F-and-vim Layer, modified with Space (by holding space)
* ,-----------------------------------------------------------.
* |PrSc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete|
* |-----------------------------------------------------------|
* | |Paus| Up| [ | ] | | | | ( | ) | | | | |
* |-----------------------------------------------------------|
* | |Lft|Dwn|Rgt| | |Left|Down|Right|Up| | | PLAY |
* |-----------------------------------------------------------|
* | | | | | < | > | |M0 | | | | | Vol+ | |
* |-----------------------------------------------------------|
* | | | | |Alt |Prev|Vol-|Next|
* `-----------------------------------------------------------'
*/
[_SPC] = KEYMAP_ISO_SPLITRSHIFT(
KC_PSCR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \
_______, KC_PAUS, KC_UP, GER_BRC_L, GER_BRC_R, _______, _______, GER_PAR_L, GER_PAR_R, _______, _______, _______, _______, _______, \
_______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, _______, KC_MPLY, \
_______, _______, _______, _______, GER_ANG_L, GER_ANG_R, KC_SPACE, M(0), _______, _______, _______, _______, KC_VOLU, _______, \
_______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT),
/* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (by holding tab)
* ,-----------------------------------------------------------.
* |WAKE| | | | | | | | | | | | |Insert| TAB+GRC = WAKE
* |-----------------------------------------------------------|
* | | | | | | | | | { | } | | | | |
* |-----------------------------------------------------------|
* | | | | | | |Pos1|PgDn|PgUp|End| | |Retrn |
* |-----------------------------------------------------------|
* | | | | | | | |AF2| | | | | PgUp | |
* |-----------------------------------------------------------|
* | | | | |Alt |Pos1|PgDn|End |
* `-----------------------------------------------------------'
*/
[_TAB] = KEYMAP_ISO_SPLITRSHIFT(
KC_WAKE, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, \
_______, _______, _______, _______, _______, _______, _______, GER_CUR_L, GER_CUR_R, _______, _______, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, _______, _______, KC_ENT, \
_______, _______, _______, _______, _______, _______, _______, M(1), _______, _______, _______, _______, KC_PGUP, _______, \
_______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END),
/* Keymap 3: Split right shift Numpad toggle Layer (by tapping the split rshift key)
* ,-----------------------------------------------------------.
* |RSET| | | | | | | 7| 8| 9| | | |Backsp |
* |-----------------------------------------------------------|
* | | | | | | | | 4 | 5 | 6 | | | | \ |
* |-----------------------------------------------------------|
* | | L | L | | | | | 1 | 2 | 3 | | | Return |
* |-----------------------------------------------------------|
* | | | L | L | L | L | L | L | | 0 | | /| Up | | All "L"s represent
* |-----------------------------------------------------------| LED controlling
* |Ctrl|Win |Alt | |Alt |Left|Down|Right|
* `-----------------------------------------------------------'
*/
[_SFX] = KEYMAP_ISO_SPLITRSHIFT(
RESET, _______, _______, _______, _______, _______, _______, KC_7, KC_8, KC_9, _______, _______, _______, KC_BSPC, \
_______, _______, _______, _______, _______, _______, _______, KC_4, KC_5, KC_6, _______, _______, _______, KC_BSLS, \
_______, F(2), F(3), _______, _______, _______, _______, KC_1, KC_2, KC_3, _______, _______, XXXXXXX, KC_ENT, \
_______, F(4), F(5), F(6), F(7), F(8), F(9), _______, _______, KC_0, _______, KC_SLSH, KC_UP, _______, \
_______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT),
};
enum function_id {
LAUNCH,
RGBLED_TOGGLE,
};
const uint16_t PROGMEM fn_actions[] = {
[1] = ACTION_FUNCTION(LAUNCH),
[10] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ENT),
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
switch(id) {
case 0:
return (record->event.pressed ?
MACRO( D(RALT), T(SPC), U(RALT), END )
:MACRO( END ));
break;
case 1:
return (record->event.pressed ?
MACRO( D(LALT), T(F2), U(LALT), END )
:MACRO( END ));
break;
}
return MACRO_NONE;
};

@ -0,0 +1,4 @@
#!/bin/bash
git checkout amj60 # gets you on branch amj60
git fetch origin # gets you up to date with origin
git merge origin/master
Loading…
Cancel
Save