Tweaking PVC atomic layout

keyboard/atomic/Makefile

@@ -51,8 +51,6 @@ TARGET_DIR = .
 # # project specific files
 SRC = atomic.c
 
-CONFIG_H = config.h
-
 ifdef keymap
 	KEYMAP = $(keymap)
 endif
@@ -87,6 +85,8 @@ endif
 
 SRC := $(KEYMAP_FILE) $(SRC)
 
+CONFIG_H = config.h
+
 # MCU name
 #MCU = at90usb1287
 MCU = atmega32u4

keyboard/atomic/keymaps/pvc/keymap.c

@@ -1,5 +1,6 @@
 #include "atomic.h"
 #include "action_layer.h"
+
 #ifdef AUDIO_ENABLE
 #include "audio.h"
 #endif
@@ -7,7 +8,8 @@
 #define _QW 0
 #define _LW 1
 #define _RS 2
-#define _FN 3
+#define _AD 3
+#define _FN 4
 
 #define M_QW 0
 #define M_LW 1
@@ -62,6 +64,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ___T___, ___T___, KC_MS_U, KC_WH_D  },
   { _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R  },
  },
+ [_ADJ] = { /* ADJUST */
+  { KC_NLCK, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  ___T___, ___T___  },
+  { KC_SLCK, KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20,  KC_F21,  KC_F22,  KC_F23,  KC_F24,  KC_PAUS, KC_PSCR  },
+  { KC_CAPS, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, KC_ACL0, KC_ACL2, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, ___T___, ___T___, KC_WH_U  },
+  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ___T___, ___T___, KC_MS_U, KC_WH_D  },
+  { _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R  },
+ },
 };
 
 #define IS_LAYER_ON(layer)  ((layer_state) & (1<<(layer)))

keyboard/atomic/keymaps/pvc/makefile.mk

@@ -3,8 +3,7 @@ MOUSEKEY_ENABLE  = yes     # Mouse keys(+4700)
 EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
 CONSOLE_ENABLE   = yes # Console for debug(+400)
 COMMAND_ENABLE   = yes # Commands for debug and configuration
-NKRO_ENABLE      = yes     # USB Nkey Rollover - if this doesn't work, see here:
-                           # https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE      = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
 MIDI_ENABLE      = no  # MIDI controls
 AUDIO_ENABLE     = yes # Audio output on port C6