Merge pull request #1057 from priyadi/selectable_output

Implement runtime selectable output (USB or BT)

quantum/quantum.c

@@ -1,4 +1,7 @@
 #include "quantum.h"
+#ifdef PROTOCOL_LUFA
+#include "outputselect.h"
+#endif
 
 #ifndef TAPPING_TERM
 #define TAPPING_TERM 200
@@ -243,6 +246,36 @@ bool process_record_quantum(keyrecord_t *record) {
 	  return false;
       break;
 	#endif
+    #ifdef PROTOCOL_LUFA
+    case OUT_AUTO:
+      if (record->event.pressed) {
+        set_output(OUTPUT_AUTO);
+      }
+      return false;
+      break;
+    case OUT_USB:
+      if (record->event.pressed) {
+        set_output(OUTPUT_USB);
+      }
+      return false;
+      break;
+    #ifdef BLUETOOTH_ENABLE
+    case OUT_BT:
+      if (record->event.pressed) {
+        set_output(OUTPUT_BLUETOOTH);
+      }
+      return false;
+      break;
+    #endif
+    #ifdef ADAFRUIT_BLE_ENABLE
+    case OUT_BLE:
+      if (record->event.pressed) {
+        set_output(OUTPUT_ADAFRUIT_BLE);
+      }
+      return false;
+      break;
+    #endif
+    #endif
     case MAGIC_SWAP_CONTROL_CAPSLOCK ... MAGIC_TOGGLE_NKRO:
       if (record->event.pressed) {
         // MAGIC actions (BOOTMAGIC without the boot)

quantum/quantum.h

@@ -15,7 +15,6 @@
 #ifdef RGBLIGHT_ENABLE
   #include "rgblight.h"
 #endif
-
 #include "action_layer.h"
 #include "eeconfig.h"
 #include <stddef.h>

quantum/quantum_keycodes.h

@@ -141,6 +141,16 @@ enum quantum_keycodes {
     PRINT_ON,
     PRINT_OFF,
 
+    // output selection
+    OUT_AUTO,
+    OUT_USB,
+#ifdef BLUETOOTH_ENABLE
+    OUT_BT,
+#endif
+#ifdef ADAFRUIT_BLE_ENABLE
+    OUT_BLE,
+#endif
+
     // always leave at the end
     SAFE_RANGE
 };

tmk_core/protocol/lufa.mk

@@ -8,13 +8,14 @@ LUFA_PATH ?= $(LUFA_DIR)/LUFA-git
 ifneq (, $(wildcard $(TMK_PATH)/$(LUFA_PATH)/LUFA/Build/lufa_sources.mk))
     # New build system from 20120730
     LUFA_ROOT_PATH = $(LUFA_PATH)/LUFA
-    include $(TMK_PATH)/$(LUFA_PATH)/LUFA/Build/lufa_sources.mk 
+    include $(TMK_PATH)/$(LUFA_PATH)/LUFA/Build/lufa_sources.mk
 else
     include $(TMK_PATH)/$(LUFA_PATH)/LUFA/makefile
 endif
 
 LUFA_SRC = lufa.c \
 	   descriptor.c \
+	   outputselect.c \
 	   $(LUFA_SRC_USB)
 
 ifeq ($(strip $(MIDI_ENABLE)), yes)

tmk_core/protocol/lufa/lufa.c

@@ -53,6 +53,7 @@
 #include "lufa.h"
 #include "quantum.h"
 #include <util/atomic.h>
+#include "outputselect.h"
 
 #ifdef NKRO_ENABLE
   #include "keycode_config.h"
@@ -589,59 +590,33 @@ void EVENT_USB_Device_ControlRequest(void)
 
 /*******************************************************************************
  * Host driver
-p
  ******************************************************************************/
 static uint8_t keyboard_leds(void)
 {
     return keyboard_led_stats;
 }
 
-#define SendToUSB 1
-#define SendToBT  2
-#define SendToBLE 4
-
-static inline uint8_t where_to_send(void) {
-#ifdef ADAFRUIT_BLE_ENABLE
-#if 0
-  if (adafruit_ble_is_connected()) {
-    // For testing, send to BLE as a priority
-    return SendToBLE;
-  }
-#endif
-
-  // This is the real policy
-  if (USB_DeviceState != DEVICE_STATE_Configured) {
-    if (adafruit_ble_is_connected()) {
-      return SendToBLE;
-    }
-  }
-#endif
-  return ((USB_DeviceState == DEVICE_STATE_Configured) ? SendToUSB : 0)
-#ifdef BLUETOOTH_ENABLE
-    || SendToBT
-#endif
-    ;
-}
-
 static void send_keyboard(report_keyboard_t *report)
 {
+    uint8_t timeout = 255;
+    uint8_t where = where_to_send();
+
 #ifdef BLUETOOTH_ENABLE
-    bluefruit_serial_send(0xFD);
+    if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) {
-    for (uint8_t i = 0; i < KEYBOARD_EPSIZE; i++) {
+        bluefruit_serial_send(0xFD);
-        bluefruit_serial_send(report->raw[i]);
+        for (uint8_t i = 0; i < KEYBOARD_EPSIZE; i++) {
+            bluefruit_serial_send(report->raw[i]);
+        }
     }
 #endif
 
-    uint8_t timeout = 255;
-    uint8_t where = where_to_send();
-
 #ifdef ADAFRUIT_BLE_ENABLE
-    if (where & SendToBLE) {
+    if (where == OUTPUT_ADAFRUIT_BLE) {
       adafruit_ble_send_keys(report->mods, report->keys, sizeof(report->keys));
     }
 #endif
 
-    if (!(where & SendToUSB)) {
+    if (where != OUTPUT_USB && where != OUTPUT_USB_AND_BT) {
       return;
     }
 
@@ -681,30 +656,31 @@ static void send_keyboard(report_keyboard_t *report)
 static void send_mouse(report_mouse_t *report)
 {
 #ifdef MOUSE_ENABLE
+    uint8_t timeout = 255;
+    uint8_t where = where_to_send();
 
 #ifdef BLUETOOTH_ENABLE
-    bluefruit_serial_send(0xFD);
+    if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) {
-    bluefruit_serial_send(0x00);
+        bluefruit_serial_send(0xFD);
-    bluefruit_serial_send(0x03);
+        bluefruit_serial_send(0x00);
-    bluefruit_serial_send(report->buttons);
+        bluefruit_serial_send(0x03);
-    bluefruit_serial_send(report->x);
+        bluefruit_serial_send(report->buttons);
-    bluefruit_serial_send(report->y);
+        bluefruit_serial_send(report->x);
-    bluefruit_serial_send(report->v); // should try sending the wheel v here
+        bluefruit_serial_send(report->y);
-    bluefruit_serial_send(report->h); // should try sending the wheel h here
+        bluefruit_serial_send(report->v); // should try sending the wheel v here
-    bluefruit_serial_send(0x00);
+        bluefruit_serial_send(report->h); // should try sending the wheel h here
+        bluefruit_serial_send(0x00);
+    }
 #endif
 
-    uint8_t timeout = 255;
-
-    uint8_t where = where_to_send();
-
 #ifdef ADAFRUIT_BLE_ENABLE
-    if (where & SendToBLE) {
+    if (where == OUTPUT_ADAFRUIT_BLE) {
       // FIXME: mouse buttons
       adafruit_ble_send_mouse_move(report->x, report->y, report->v, report->h);
     }
 #endif
-    if (!(where & SendToUSB)) {
+
+    if (where != OUTPUT_USB && where != OUTPUT_USB_AND_BT) {
       return;
     }
 
@@ -746,32 +722,34 @@ static void send_system(uint16_t data)
 
 static void send_consumer(uint16_t data)
 {
+    uint8_t timeout = 255;
+    uint8_t where = where_to_send();
 
 #ifdef BLUETOOTH_ENABLE
-    static uint16_t last_data = 0;
+    if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) {
-    if (data == last_data) return;
+        static uint16_t last_data = 0;
-    last_data = data;
+        if (data == last_data) return;
-    uint16_t bitmap = CONSUMER2BLUEFRUIT(data);
+        last_data = data;
-    bluefruit_serial_send(0xFD);
+        uint16_t bitmap = CONSUMER2BLUEFRUIT(data);
-    bluefruit_serial_send(0x00);
+        bluefruit_serial_send(0xFD);
-    bluefruit_serial_send(0x02);
+        bluefruit_serial_send(0x00);
-    bluefruit_serial_send((bitmap>>8)&0xFF);
+        bluefruit_serial_send(0x02);
-    bluefruit_serial_send(bitmap&0xFF);
+        bluefruit_serial_send((bitmap>>8)&0xFF);
-    bluefruit_serial_send(0x00);
+        bluefruit_serial_send(bitmap&0xFF);
-    bluefruit_serial_send(0x00);
+        bluefruit_serial_send(0x00);
-    bluefruit_serial_send(0x00);
+        bluefruit_serial_send(0x00);
-    bluefruit_serial_send(0x00);
+        bluefruit_serial_send(0x00);
+        bluefruit_serial_send(0x00);
+    }
 #endif
 
-    uint8_t timeout = 255;
-    uint8_t where = where_to_send();
-
 #ifdef ADAFRUIT_BLE_ENABLE
-    if (where & SendToBLE) {
+    if (where == OUTPUT_ADAFRUIT_BLE) {
       adafruit_ble_send_consumer_key(data, 0);
     }
 #endif
-    if (!(where & SendToUSB)) {
+
+    if (where != OUTPUT_USB && where != OUTPUT_USB_AND_BT) {
       return;
     }
 

tmk_core/protocol/lufa/outputselect.c

@@ -0,0 +1,56 @@
+/*
+Copyright 2017 Priyadi Iman Nurcahyo
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "lufa.h"
+#include "outputselect.h"
+#ifdef ADAFRUIT_BLE_ENABLE
+    #include "adafruit_ble.h"
+#endif
+
+uint8_t desired_output = OUTPUT_DEFAULT;
+
+void set_output(uint8_t output) {
+    set_output_user(output);
+    desired_output = output;
+}
+
+__attribute__((weak))
+void set_output_user(uint8_t output) {
+}
+
+uint8_t auto_detect_output(void) {
+    if (USB_DeviceState == DEVICE_STATE_Configured) {
+        return OUTPUT_USB;
+    }
+
+#ifdef ADAFRUIT_BLE_ENABLE
+    if (adafruit_ble_is_connected()) {
+        return OUTPUT_ADAFRUIT_BLE;
+    }
+#endif
+
+#ifdef BLUETOOTH_ENABLE
+    return OUTPUT_BLUETOOTH; // should check if BT is connected here
+#endif
+
+    return OUTPUT_NONE;
+}
+
+uint8_t where_to_send(void) {
+    if (desired_output == OUTPUT_AUTO) {
+        return auto_detect_output();
+    }
+    return desired_output;
+}
+

tmk_core/protocol/lufa/outputselect.h

@@ -0,0 +1,41 @@
+/*
+Copyright 2017 Priyadi Iman Nurcahyo
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+enum outputs {
+    OUTPUT_AUTO,
+
+    OUTPUT_NONE,
+    OUTPUT_USB,
+    OUTPUT_BLUETOOTH,
+    OUTPUT_ADAFRUIT_BLE,
+
+    // backward compatibility
+    OUTPUT_USB_AND_BT
+};
+
+/**
+ * backward compatibility for BLUETOOTH_ENABLE, send to BT and USB by default
+ */
+#ifndef OUTPUT_DEFAULT
+    #ifdef BLUETOOTH_ENABLE
+        #define OUTPUT_DEFAULT OUTPUT_USB_AND_BT
+    #else
+        #define OUTPUT_DEFAULT OUTPUT_AUTO
+    #endif
+#endif
+
+void set_output(uint8_t output);
+void set_output_user(uint8_t output);
+uint8_t auto_detect_output(void);
+uint8_t where_to_send(void);