Added bluefruit protocol and converter for 70% M

example_keyboards
Benjamin Gould 11 years ago
parent c18c52f551
commit 05792e2b83

@ -0,0 +1,113 @@
# Target file name (without extension).
TARGET = terminal_bluefruit
# Directory common source filess exist
TOP_DIR = ../..
# Directory keyboard dependent files exist
TARGET_DIR = .
# keyboard dependent files
SRC = keymap.c \
matrix.c \
led.c
CONFIG_H = config.h
BLUEFRUIT_TRACE_SERIAL=true
# MCU name, you MUST set this to match the board you are using
# type "make clean" after changing this, so all files will be rebuilt
#MCU = at90usb162 # Teensy 1.0
MCU = atmega32u4 # Teensy 2.0
#MCU = at90usb646 # Teensy++ 1.0
#MCU = at90usb1286 # Teensy++ 2.0
# Processor frequency.
# Normally the first thing your program should do is set the clock prescaler,
# so your program will run at the correct speed. You should also set this
# variable to same clock speed. The _delay_ms() macro uses this, and many
# examples use this variable to calculate timings. Do not add a "UL" here.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in bytes
# Teensy halfKay 512
# Atmel DFU loader 4096
# LUFA bootloader 4096
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
#
# PS/2 protocol implementations
# USART is recommended if it is available, others are for reference purpose.
# INT implementation will drop simultaneous key strokes.
#
#PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened)
PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
#PS2_USE_BUSYWAIT = yes # uses primitive reference code
ifdef PS2_USE_USART
SRC += protocol/ps2_usart.c
OPT_DEFS += -DPS2_USE_USART
endif
ifdef PS2_USE_INT
SRC += protocol/ps2.c
OPT_DEFS += -DPS2_USE_INT
endif
ifdef PS2_USE_BUSYWAIT
SRC += protocol/ps2.c
OPT_DEFS += -DPS2_USE_BUSYWAIT
endif
#---------------- Programming Options --------------------------
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
# Search Path
VPATH += $(TARGET_DIR)
VPATH += $(TOP_DIR)
include $(TOP_DIR)/protocol/bluefruit.mk
include $(TOP_DIR)/protocol.mk
include $(TOP_DIR)/common.mk
include $(TOP_DIR)/rules.mk

@ -0,0 +1,37 @@
Keyboard converter for IBM terminal keyboard
============================================
It supports PS/2 Scan Code Set 3 and runs on USB AVR chips such like PJRC Teensy.
I tested the converter on ATMega32U4 with 1392595(102keys) and 6110345(122keys).
Source code: https://github.com/tmk/tmk_keyboard
Article: http://geekhack.org/index.php?topic=27272.0
CONNECTION
----------
Keyboard ATMega32U4
----------------------
Data: PD2
Clock: PD5
And VCC and GND, of course. See RESOURCE for keyboard connector pin assign.
BUILD
-----
$ git clone https://github.com/tmk/tmk_keyboard.git
$ cd converter/terminal_usb
$ make
RESOURCE
--------
Soarer's Converter: http://geekhack.org/index.php?topic=17458.0
102keys(1392595): http://geekhack.org/index.php?topic=10737.0
122keys(1390876): http://www.seasip.info/VintagePC/ibm_1390876.html
KbdBabel: http://www.kbdbabel.org/
RJ45 Connector: http://www.kbdbabel.org/conn/kbd_connector_ibmterm.png
DIN Connector: http://www.kbdbabel.org/conn/kbd_connector_ibm3179_318x_319x.png
WinAVR: http://winavr.sourceforge.net/
EOF

@ -0,0 +1,112 @@
/*
Converter for 70% IBM Terminal Keyboard
Author: Benjamin Gould, 2013
Based on code Copyright 2011 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6535
#define DEVICE_VER 0x0100
#define MANUFACTURER t.m.k.
#define PRODUCT 70% IBM Terminal Keyboard Converter w/ Bluetooth
#define DESCRIPTION USB converter for IBM Terminal Keyboard w/ Bluetooth
/* matrix size */
#define MATRIX_ROWS 17 // keycode bit: 3-0
#define MATRIX_COLS 8 // keycode bit: 6-4
/* legacy keymap support */
// #define USE_LEGACY_KEYMAP
/* key combination for command */
#define IS_COMMAND() ( \
(keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) || \
(keyboard_report->mods == (MOD_BIT(KC_RALT) | MOD_BIT(KC_RCTL))) \
)
/* USART configuration
* asynchronous, 9600baud, 8-data bit, non parity, 1-stop bit, no flow control
*/
#ifdef __AVR_ATmega32U4__
#define SERIAL_UART_BAUD 9600
#define SERIAL_UART_DATA UDR1
#define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
#define SERIAL_UART_RXD_VECT USART1_RX_vect
#define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
#define SERIAL_UART_INIT() do { \
UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
UCSR1B = (1<<TXEN1); /* TX: enable */ \
UCSR1C = (0<<UPM11) | (0<<UPM10) | /* parity: none(00), even(01), odd(11) */ \
(0<<UCSZ12) | (1<<UCSZ11) | (1<<UCSZ10); /* data-8bit(011) */ \
sei(); \
} while(0)
#else
# error "USART configuration is needed."
#endif
/*
* PS/2 Interrupt configuration
*/
#ifdef PS2_USE_INT
/* uses INT1 for clock line(ATMega32U4) */
#define PS2_CLOCK_PORT PORTD
#define PS2_CLOCK_PIN PIND
#define PS2_CLOCK_DDR DDRD
#define PS2_CLOCK_BIT 1
#define PS2_DATA_PORT PORTD
#define PS2_DATA_PIN PIND
#define PS2_DATA_DDR DDRD
#define PS2_DATA_BIT 0
#define PS2_INT_INIT() do { \
EICRA |= ((1<<ISC11) | \
(0<<ISC10)); \
} while (0)
#define PS2_INT_ON() do { \
EIMSK |= (1<<INT1); \
} while (0)
#define PS2_INT_OFF() do { \
EIMSK &= ~(1<<INT1); \
} while (0)
#define PS2_INT_VECT INT1_vect
#endif
/*
* PS/2 Busywait configuration
*/
#ifdef PS2_USE_BUSYWAIT
#define PS2_CLOCK_PORT PORTD
#define PS2_CLOCK_PIN PIND
#define PS2_CLOCK_DDR DDRD
#define PS2_CLOCK_BIT 1
#define PS2_DATA_PORT PORTD
#define PS2_DATA_PIN PIND
#define PS2_DATA_DDR DDRD
#define PS2_DATA_BIT 0
#endif
#endif

@ -0,0 +1,227 @@
/*
Converter for 70% IBM Terminal Keyboard
Author: Benjamin Gould, 2013
Based on code Copyright 2011 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <stdbool.h>
#include <avr/pgmspace.h>
#include "keycode.h"
#include "print.h"
#include "debug.h"
#include "util.h"
#include "keymap.h"
/*
* IBM Terminal keyboard 6110345(122keys)/1392595(102keys)
* http://geekhack.org/showthread.php?10737-What-Can-I-Do-With-a-Terminal-Model-M
* http://www.seasip.info/VintagePC/ibm_1391406.html
*
* Keymap array:
* 8 bytes
* +---------+
* 0| |
* :| | 0x00-0x87
* ;| |
* 17| |
* +---------+
*/
#define KEYMAP( \
K08,K10,K18,K20,K28,K30,K38,K40,K48,K50,K57,K5F, \
K07,K0F,K17,K1F,K27,K2F,K37,K3F,K47,K4F,K56,K5E, \
\
K05,K06, K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K5D,K66, K67,K6E,K6F, K76,K77,K7E,K84, \
K04,K0C, K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, K5C, K64,K65,K6D, K6C,K75,K7D,K7C, \
K03,K0B, K14,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K53,K5A, K63, K6B,K73,K74,K7B, \
K83,K0A, K12,K13,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K51,K59, K61,K62,K6A, K69,K72,K7A,K79, \
K01,K09, K11, K19, K29, K39, K58, K60, K68,K70,K71,K78 \
) { \
{ KC_NO, KC_##K01, KC_NO, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
{ KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
{ KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
{ KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \
{ KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F }, \
{ KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \
{ KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F }, \
{ KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
{ KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D, KC_##K5E, KC_##K5F }, \
{ KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \
{ KC_##K68, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_##K6D, KC_##K6E, KC_##K6F }, \
{ KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 }, \
{ KC_##K78, KC_##K79, KC_##K7A, KC_##K7B, KC_##K7C, KC_##K7D, KC_##K7E, KC_NO }, \
{ KC_NO, KC_NO, KC_NO, KC_##K83, KC_##K84, KC_NO, KC_NO, KC_NO, }, \
}
static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* 0: default
* ,---. ,---------------. ,---------------. ,---------------. ,-----------.
* |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
* `---' `---------------' `---------------' `---------------' `-----------'
* ,-----------------------------------------------------------. ,-----------. ,---------------.
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \|BS | |Ins|Hom|PgU| |NmL| /| *| -|
* |-----------------------------------------------------------| |-----------| |---------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| |
* |-----------------------------------------------------------| `-----------' |-----------| +|
* |CapsLo| A| S| D| F| G| H| J| K| L| ;| '| #|Retu| | 4| 5| 6| |
* |-----------------------------------------------------------| ,---. |---------------|
* |Shif| \| Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| |
* |-----------------------------------------------------------| ,-----------. |-----------|Ent|
* |Ctrl| |Alt | Space |Alt | |Ctrl| |Lef|Dow|Rig| | 0| .| |
* `----' `---------------------------------------' `----' `-----------' `---------------'
*/
/*
KEYMAP(
F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,
F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12,
PSCR,ESC, GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
SLCK,INT4, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS,
PAUS,INT5, CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, NUHS,ENT, UP, P4, P5, P6, PCMM,
APP, INT6, LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RO, RSFT, LEFT,INT2,RGHT, P1, P2, P3, PENT,
RGUI,LGUI, LCTL, LALT, SPC, RALT, RCTL, DOWN, NO, P0, PDOT,NO
),
*/
/*
KEYMAP(
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
TRNS,TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,TRNS,TRNS,TRNS
),
*/
// pseudo ANSI
KEYMAP(
FN0, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO,
PSCR,PAUS,PGUP,PGDN,HOME,END, INS, DEL, LEFT,DOWN,UP, RGHT,
NO, NO, ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, GRV, BSPC, NO, NO, NO, NO, NO, NO, NO,
NO, NO, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, NO, NO, NO, NO, NO, NO, NO,
NO, NO, LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT, BSLS,ENT, NO, NO, NO, NO, NO,
NO, NO, LSFT,FN1 ,Z, X, C, V, B, N, M, COMM,DOT, SLSH, FN1, RSFT, NO, NO, NO, NO, NO, NO, NO,
NO, NO, LCTL, LALT, SPC, LGUI, APP, NO, NO, NO, NO, NO
),
// Momentary Function Layer
KEYMAP(
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
TRNS,MUTE,VOLD,VOLU,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
TRNS,TRNS, TRNS,F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,HOME,UP ,END, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,MS_L,MS_D,MS_U,MS_R,LEFT,DOWN, RGHT,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PGUP,PGDN,TRNS, TRNS,RSFT, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
TRNS,TRNS, BTN2, TRNS, BTN1, RALT, RCTL, TRNS, TRNS,TRNS,TRNS,TRNS
),
// Mouse Layer
KEYMAP(
FN0, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,NO, TRNS, NO, NO, NO, NO, NO, NO, NO,
TRNS,TRNS, TRNS,NO, NO, MS_U,NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, TRNS, NO, NO, NO, NO, NO, NO, NO,
TRNS,TRNS, BTN2,BTN1,MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,NO, NO, NO, ENT, NO, NO, NO, NO, NO,
TRNS,TRNS, TRNS,TRNS,NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, RSFT, NO, NO, NO, NO, NO, NO, NO,
TRNS,TRNS, TRNS, TRNS, BTN1, BTN2, TRNS, NO, NO, NO, NO, NO
),
// vi Layer
KEYMAP(
FN0, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,NO, TRNS, NO, NO, NO, NO, NO, NO, NO,
TRNS,TRNS, TRNS,HOME,PGDN,UP, PGUP,END, HOME,PGDN,PGUP,END, NO, NO, NO, TRNS, NO, NO, NO, NO, NO, NO, NO,
TRNS,TRNS, TRNS,NO, LEFT,DOWN,RGHT,NO, LEFT,DOWN,UP, RGHT,NO, NO, NO, ENT, NO, NO, NO, NO, NO,
TRNS,TRNS, TRNS,TRNS,NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, RSFT, NO, NO, NO, NO, NO, NO, NO,
TRNS,TRNS, TRNS, TRNS, SPC, RALT, RCTL, NO, NO, NO, NO, NO
),
// num lock layer
KEYMAP(
FN0, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
TRNS,TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,TRNS,TRNS,TRNS
),
};
static const uint16_t fn_actions[] PROGMEM = {
[0] = ACTION_DEFAULT_LAYER_SET(0),
[1] = ACTION_LAYER_MOMENTARY(1),
[2] = ACTION_LAYER_MOMENTARY(2), //ACTION_LAYER_ON(2, ON_RELEASE),
[3] = KC_NO, //ACTION_LAYER_ON(3, ON_RELEASE),
[4] = KC_NO, //ACTION_LAYER_ON(4, ON_RELEASE),
[5] = KC_NO,
[6] = KC_NO,
[7] = KC_NO,
};
/*
enum macro_id {
MS_UL,
MS_UR,
MS_DL,
MS_DR,
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
keyevent_t event = record->event;
switch (id) {
case MS_UL:
return (event.pressed ? MACRO( D(MS_L), D(MS_U), END ) : MACRO( U(MS_L), U(MS_U), END ) );
case MS_UR:
return (event.pressed ? MACRO( D(MS_R), D(MS_U), END ) : MACRO( U(MS_L), U(MS_U), END ) );
case MS_DL:
return (event.pressed ? MACRO( D(MS_L), D(MS_D), END ) : MACRO( U(MS_L), U(MS_U), END ) );
case MS_DR:
return (event.pressed ? MACRO( D(MS_R), D(MS_D), END ) : MACRO( U(MS_L), U(MS_U), END ) );
}
return MACRO_NONE;
}
*/
uint8_t keymap_key_to_keycode(uint8_t layer, key_t key)
{
return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
}
action_t keymap_fn_to_action(uint8_t keycode)
{
action_t action;
action.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]);
return action;
}

@ -0,0 +1,35 @@
/*
Converter for 70% IBM Terminal Keyboard
Author: Benjamin Gould, 2013
Based on code Copyright 2011 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "stdint.h"
#include "ps2.h"
#include "led.h"
void led_set(uint8_t usb_led)
{
uint8_t ps2_led = 0;
if (usb_led & (1<<USB_LED_SCROLL_LOCK))
ps2_led |= (1<<PS2_LED_SCROLL_LOCK);
if (usb_led & (1<<USB_LED_NUM_LOCK))
ps2_led |= (1<<PS2_LED_NUM_LOCK);
if (usb_led & (1<<USB_LED_CAPS_LOCK))
ps2_led |= (1<<PS2_LED_CAPS_LOCK);
ps2_host_set_led(ps2_led);
}

@ -0,0 +1,262 @@
/*
Copyright 2011 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include <util/delay.h>
#include "print.h"
#include "util.h"
#include "debug.h"
#include "ps2.h"
#include "matrix.h"
static void matrix_make(uint8_t code);
static void matrix_break(uint8_t code);
#ifdef MATRIX_HAS_GHOST
static bool matrix_has_ghost_in_row(uint8_t row);
#endif
/*
* Matrix Array usage:
* 'Scan Code Set 3' is assigned into 17x8 cell matrix.
*
* 8bit wide
* +---------+
* 0| |
* :| | 0x00-0x87
* ;| |
* 17| |
* +---------+
*/
static uint8_t matrix[MATRIX_ROWS];
#define ROW(code) (code>>3)
#define COL(code) (code&0x07)
static bool is_modified = false;
inline
uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
void matrix_init(void)
{
debug_enable = true;
//debug_matrix = true;
//debug_keyboard = true;
//debug_mouse = false;
ps2_host_init();
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
return;
}
uint8_t matrix_scan(void)
{
// scan code reading states
static enum {
RESET,
RESET_RESPONSE,
KBD_ID0,
KBD_ID1,
CONFIG,
READY,
F0,
} state = RESET;
is_modified = false;
uint8_t code;
if ((code = ps2_host_recv())) {
debug("r"); debug_hex(code); debug(" ");
}
switch (state) {
case RESET:
debug("wFF ");
if (ps2_host_send(0xFF) == 0xFA) {
debug("[ack]\nRESET_RESPONSE: ");
state = RESET_RESPONSE;
}
break;
case RESET_RESPONSE:
if (code == 0xAA) {
debug("[ok]\nKBD_ID: ");
state = KBD_ID0;
} else if (code) {
debug("err\nRESET: ");
state = RESET;
}
break;
// after reset receive keyboad ID(2 bytes)
case KBD_ID0:
if (code) {
state = KBD_ID1;
}
break;
case KBD_ID1:
if (code) {
debug("\nCONFIG: ");
state = CONFIG;
}
break;
case CONFIG:
debug("wF8 ");
if (ps2_host_send(0xF8) == 0xFA) {
debug("[ack]\nREADY\n");
state = READY;
}
break;
case READY:
switch (code) {
case 0x00:
break;
case 0xF0:
state = F0;
debug(" ");
break;
default: // normal key make
if (code < 0x88) {
matrix_make(code);
} else {
debug("unexpected scan code at READY: "); debug_hex(code); debug("\n");
}
state = READY;
debug("\n");
}
break;
case F0: // Break code
switch (code) {
case 0x00:
break;
default:
if (code < 0x88) {
matrix_break(code);
} else {
debug("unexpected scan code at F0: "); debug_hex(code); debug("\n");
}
state = READY;
debug("\n");
}
break;
}
return 1;
}
bool matrix_is_modified(void)
{
return is_modified;
}
inline
bool matrix_has_ghost(void)
{
#ifdef MATRIX_HAS_GHOST
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
if (matrix_has_ghost_in_row(i))
return true;
}
#endif
return false;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & (1<<col));
}
inline
uint8_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print("\nr/c 01234567\n");
for (uint8_t row = 0; row < matrix_rows(); row++) {
phex(row); print(": ");
pbin_reverse(matrix_get_row(row));
#ifdef MATRIX_HAS_GHOST
if (matrix_has_ghost_in_row(row)) {
print(" <ghost");
}
#endif
print("\n");
}
}
uint8_t matrix_key_count(void)
{
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += bitpop(matrix[i]);
}
return count;
}
#ifdef MATRIX_HAS_GHOST
inline
static bool matrix_has_ghost_in_row(uint8_t row)
{
// no ghost exists in case less than 2 keys on
if (((matrix[row] - 1) & matrix[row]) == 0)
return false;
// ghost exists in case same state as other row
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
if (i != row && (matrix[i] & matrix[row]) == matrix[row])
return true;
}
return false;
}
#endif
inline
static void matrix_make(uint8_t code)
{
if (!matrix_is_on(ROW(code), COL(code))) {
matrix[ROW(code)] |= 1<<COL(code);
is_modified = true;
}
}
inline
static void matrix_break(uint8_t code)
{
if (matrix_is_on(ROW(code), COL(code))) {
matrix[ROW(code)] &= ~(1<<COL(code));
is_modified = true;
}
}

@ -0,0 +1,27 @@
BLUEFRUIT_DIR = protocol/bluefruit
PJRC_DIR = protocol/pjrc
SRC += $(BLUEFRUIT_DIR)/main.c \
$(BLUEFRUIT_DIR)/bluefruit.c \
serial_uart.c \
$(PJRC_DIR)/pjrc.c \
$(PJRC_DIR)/usb_keyboard.c \
$(PJRC_DIR)/usb_debug.c \
$(PJRC_DIR)/usb.c
# Option modules
ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE)
SRC += $(PJRC_DIR)/usb_mouse.c
endif
ifdef EXTRAKEY_ENABLE
SRC += $(PJRC_DIR)/usb_extra.c
endif
# Search Path
VPATH += $(TOP_DIR)/$(BLUEFRUIT_DIR)
#VPATH += $(TOP_DIR)/$(BLUEFRUIT_DIR)/usb_debug_only
VPATH += $(TOP_DIR)/$(PJRC_DIR)
OPT_DEFS += -DPROTOCOL_BLUEFRUIT
OPT_DEFS += -DPROTOCOL_PJRC

@ -0,0 +1,202 @@
/*
Bluefruit Protocol for TMK firmware
Author: Benjamin Gould, 2013
Based on code Copyright 2011 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include "host.h"
#include "report.h"
#include "print.h"
#include "debug.h"
#include "host_driver.h"
#include "serial.h"
#include "bluefruit.h"
#define BLUEFRUIT_TRACE_SERIAL 1
static uint8_t bluefruit_keyboard_leds = 0;
static void bluefruit_serial_send(uint8_t);
void bluefruit_keyboard_print_report(report_keyboard_t *report)
{
if (!debug_keyboard) return;
dprintf("keys: "); for (int i = 0; i < REPORT_KEYS; i++) { debug_hex8(report->keys[i]); dprintf(" "); }
dprintf(" mods: "); debug_hex8(report->mods);
dprintf(" reserved: "); debug_hex8(report->reserved);
dprintf("\n");
}
#ifdef BLUEFRUIT_TRACE_SERIAL
static void bluefruit_trace_header()
{
dprintf("+------------------------------------+\n");
dprintf("| HID report to Bluefruit via serial |\n");
dprintf("+------------------------------------+\n|");
}
static void bluefruit_trace_footer()
{
dprintf("|\n+------------------------------------+\n\n");
}
#endif
static void bluefruit_serial_send(uint8_t data)
{
#ifdef BLUEFRUIT_TRACE_SERIAL
dprintf(" ");
debug_hex8(data);
dprintf(" ");
#endif
serial_send(data);
}
/*------------------------------------------------------------------*
* Host driver
*------------------------------------------------------------------*/
static uint8_t keyboard_leds(void);
static void send_keyboard(report_keyboard_t *report);
static void send_mouse(report_mouse_t *report);
static void send_system(uint16_t data);
static void send_consumer(uint16_t data);
static host_driver_t driver = {
keyboard_leds,
send_keyboard,
send_mouse,
send_system,
send_consumer
};
host_driver_t *bluefruit_driver(void)
{
return &driver;
}
static uint8_t keyboard_leds(void) {
return bluefruit_keyboard_leds;
}
static void send_keyboard(report_keyboard_t *report)
{
#ifdef BLUEFRUIT_TRACE_SERIAL
bluefruit_trace_header();
#endif
bluefruit_serial_send(0xFD);
for (uint8_t i = 0; i < REPORT_SIZE; i++) {
bluefruit_serial_send(report->raw[i]);
}
#ifdef BLUEFRUIT_TRACE_SERIAL
bluefruit_trace_footer();
#endif
}
static void send_mouse(report_mouse_t *report)
{
#ifdef BLUEFRUIT_TRACE_SERIAL
bluefruit_trace_header();
#endif
bluefruit_serial_send(0xFD);
bluefruit_serial_send(0x00);
bluefruit_serial_send(0x03);
bluefruit_serial_send(report->buttons);
bluefruit_serial_send(report->x);
bluefruit_serial_send(report->y);
bluefruit_serial_send(report->v); // should try sending the wheel v here
bluefruit_serial_send(report->h); // should try sending the wheel h here
bluefruit_serial_send(0x00);
#ifdef BLUEFRUIT_TRACE_SERIAL
bluefruit_trace_footer();
#endif
}
static void send_system(uint16_t data)
{
}
/*
+-----------------+-------------------+-------+
| Consumer Key | Bit Map | Hex |
+-----------------+-------------------+-------+
| Home | 00000001 00000000 | 01 00 |
| KeyboardLayout | 00000010 00000000 | 02 00 |
| Search | 00000100 00000000 | 04 00 |
| Snapshot | 00001000 00000000 | 08 00 |
| VolumeUp | 00010000 00000000 | 10 00 |
| VolumeDown | 00100000 00000000 | 20 00 |
| Play/Pause | 01000000 00000000 | 40 00 |
| Fast Forward | 10000000 00000000 | 80 00 |
| Rewind | 00000000 00000001 | 00 01 |
| Scan Next Track | 00000000 00000010 | 00 02 |
| Scan Prev Track | 00000000 00000100 | 00 04 |
| Random Play | 00000000 00001000 | 00 08 |
| Stop | 00000000 00010000 | 00 10 |
+-------------------------------------+-------+
*/
#define CONSUMER2BLUEFRUIT(usage) \
(usage == AUDIO_MUTE ? 0x0000 : \
(usage == AUDIO_VOL_UP ? 0x1000 : \
(usage == AUDIO_VOL_DOWN ? 0x2000 : \
(usage == TRANSPORT_NEXT_TRACK ? 0x0002 : \
(usage == TRANSPORT_PREV_TRACK ? 0x0004 : \
(usage == TRANSPORT_STOP ? 0x0010 : \
(usage == TRANSPORT_STOP_EJECT ? 0x0000 : \
(usage == TRANSPORT_PLAY_PAUSE ? 0x4000 : \
(usage == AL_CC_CONFIG ? 0x0000 : \
(usage == AL_EMAIL ? 0x0000 : \
(usage == AL_CALCULATOR ? 0x0000 : \
(usage == AL_LOCAL_BROWSER ? 0x0000 : \
(usage == AC_SEARCH ? 0x0400 : \
(usage == AC_HOME ? 0x0100 : \
(usage == AC_BACK ? 0x0000 : \
(usage == AC_FORWARD ? 0x0000 : \
(usage == AC_STOP ? 0x0000 : \
(usage == AC_REFRESH ? 0x0000 : \
(usage == AC_BOOKMARKS ? 0x0000 : 0)))))))))))))))))))
static void send_consumer(uint16_t data)
{
static uint16_t last_data = 0;
if (data == last_data) return;
last_data = data;
uint16_t bitmap = CONSUMER2BLUEFRUIT(data);
#ifdef BLUEFRUIT_TRACE_SERIAL
dprintf("\nData: ");
debug_hex16(data);
dprintf("; bitmap: ");
debug_hex16(bitmap);
dprintf("\n");
bluefruit_trace_header();
#endif
bluefruit_serial_send(0xFD);
bluefruit_serial_send(0x00);
bluefruit_serial_send(0x02);
bluefruit_serial_send((bitmap>>8)&0xFF);
bluefruit_serial_send(bitmap&0xFF);
bluefruit_serial_send(0x00);
bluefruit_serial_send(0x00);
bluefruit_serial_send(0x00);
bluefruit_serial_send(0x00);
#ifdef BLUEFRUIT_TRACE_SERIAL
bluefruit_trace_footer();
#endif
}

@ -0,0 +1,28 @@
/*
Bluefruit Protocol for TMK firmware
Author: Benjamin Gould, 2013
Based on code Copyright 2011 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef VUSB_H
#define VUSB_H
#include "host_driver.h"
host_driver_t *bluefruit_driver(void);
#endif

@ -0,0 +1,116 @@
/*
Bluefruit Protocol for TMK firmware
Author: Benjamin Gould, 2013
Based on code Copyright 2011 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <avr/interrupt.h>
#include <avr/wdt.h>
#include <avr/sleep.h>
#include <util/delay.h>
#include "serial.h"
#include "keyboard.h"
#include "usb.h"
#include "host.h"
#include "timer.h"
#include "print.h"
#include "debug.h"
#include "sendchar.h"
#include "suspend.h"
#include "bluefruit.h"
#include "pjrc.h"
#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
#define HOST_DRIVER_NOT_SET 0
#define BLUEFRUIT_HOST_DRIVER 1
#define PJRC_HOST_DRIVER 2
int main(void)
{
CPU_PRESCALE(0);
DDRD = _BV(PD5);
DDRB = _BV(PB0);
PORTD = _BV(PD5);
PORTB = _BV(PB0);
print_set_sendchar(sendchar);
usb_init();
_delay_ms(2000);
// while (!usb_configured()) /* wait */
dprintf("Initializing keyboard...\n");
keyboard_init();
// This implementation is pretty simplistic... if the USB connection
// is not configured, choose the Bluefruit, otherwise use USB
// Definitely would prefer to have this driven by an input pin and make
// it switch dynamically - BCG
if (!usb_configured()) {
// Send power to Bluefruit... Adafruit says it takes 27 mA, I think
// the pins should provide 40 mA, but just in case I switch the
// Bluefruit using a transistor - BCG
DDRB = _BV(PB6);
PORTB |= _BV(PB6);
dprintf("Setting host driver to bluefruit...\n");
host_set_driver(bluefruit_driver());
dprintf("Initializing serial...\n");
serial_init();
// wait an extra second for the PC's operating system
// to load drivers and do whatever it does to actually
// be ready for input
_delay_ms(1000);
PORTD = ~_BV(PD5);
dprintf("Starting main loop");
while (1) {
keyboard_task();
}
} else {
// I'm not smart enough to get this done with LUFA - BCG
dprintf("Setting host driver to PJRC...\n");
host_set_driver(pjrc_driver());
#ifdef SLEEP_LED_ENABLE
sleep_led_init();
#endif
// wait an extra second for the PC's operating system
// to load drivers and do whatever it does to actually
// be ready for input
_delay_ms(1000);
PORTB = ~_BV(PB0);
dprintf("Starting main loop");
while (1) {
while (suspend) {
suspend_power_down();
if (remote_wakeup && suspend_wakeup_condition()) {
usb_remote_wakeup();
}
}
keyboard_task();
}
}
}
Loading…
Cancel
Save