Add files via upload
Rozakiin
7 years ago
committed by
Jack Humbert
parent
525b3deadf
commit
05351ce8b3
@ -0,0 +1,3 @@
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,76 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <ukkeyboards@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x554B /* Ascii */
|
||||
#define PRODUCT_ID 0x004E
|
||||
#define DEVICE_VER 0x0002
|
||||
#define MANUFACTURER UK Keyboards
|
||||
#define PRODUCT UK78
|
||||
#define DESCRIPTION QMK keyboard firmware for UK78
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 19
|
||||
|
||||
/* key matrix pins */
|
||||
#define MATRIX_ROW_PINS { F3, F2, F1, F0, A0 }
|
||||
#define MATRIX_COL_PINS { A2, A1, F5, F4, E6, E7, E5, E4, B7, D0, D1, D2, D3, D4, D5, D6, D7, B5, E0 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* number of backlight levels */
|
||||
#define BACKLIGHT_PIN B6
|
||||
#ifdef BACKLIGHT_PIN
|
||||
#define BACKLIGHT_LEVELS 3
|
||||
#endif
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* prevent stuck modifiers */
|
||||
#define PREVENT_STUCK_MODIFIERS
|
||||
|
||||
/* ws2812b options */
|
||||
#define RGB_DI_PIN F6
|
||||
#ifdef RGB_DI_PIN
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 20
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
#endif
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,119 @@
|
||||
#include "uk78.h"
|
||||
|
||||
// Helpful defines
|
||||
#define _______ KC_TRNS
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _BL 0
|
||||
#define _FL1 1
|
||||
#define _FL2 2
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* _BL: Base Layer(Default) - For ISO enter use ANSI \
|
||||
* ,-------------------------------------------------------------------------------.
|
||||
* |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| /|BSpc| Del| P/| P*| P-|
|
||||
* |-------------------------------------------------------------------------------|
|
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | P7| P8| P9| P=|
|
||||
* |-------------------------------------------------------------------------------|
|
||||
* |CAPS | A| S| D| F| G| H| J| K| L| ;| '| #| Ent| P4| P5| P6| P+|
|
||||
* |-------------------------------------------------------------------------------|
|
||||
* |Shift| \| Z| X| C| V| B| N| M| ,| .| /|Shift | Up| P1| P2| P3|SLck|
|
||||
* |-------------------------------------------------------------------------------|
|
||||
* |Ctrl|Win |Alt | Space |Alt|Mo(1)|Ctrl|Lef|Dow| Rig| P0| P.|PEnt|
|
||||
* `-------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_BL] = KEYMAP(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_DEL, KC_PSLS, KC_PAST, KC_PMNS,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PEQL,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS,
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_SLCK,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FL1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT),
|
||||
/* _FL1: Function Layer 1 - For ISO enter use ANSI \
|
||||
* ,-------------------------------------------------------------------------------.
|
||||
* | `|F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|PScr|Ins|NLck| | | |
|
||||
* |-------------------------------------------------------------------------------|
|
||||
* | | | | |RST| | | | | | | | | | | | | |
|
||||
* |-------------------------------------------------------------------------------|
|
||||
* | | | | | | |Hu+|Va+|Sa+| | | | | | | | | |
|
||||
* |-------------------------------------------------------------------------------|
|
||||
* | | | | | |RGB|Hu-|Va-|Sa-|Bl-|Bl+| |Mute|Vol+| | | | |
|
||||
* |-------------------------------------------------------------------------------|
|
||||
* | | | | BL_Toggle | | | | |Vol-| | | | |
|
||||
* `-------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_FL1] = KEYMAP(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_INS, KC_NLCK, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_HUD, RGB_SAD, RGB_VAD, BL_DEC, BL_INC, KC_TRNS, KC_MUTE, KC_MUTE, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||
/* _FL2: Function Layer 2 - For ISO enter use ANSI \
|
||||
* ,-------------------------------------------------------------------------------.
|
||||
* | | | | | | | | | | | | | | | | | | | |
|
||||
* |-------------------------------------------------------------------------------|
|
||||
* | | | | | | | | | | | | | | | | | | |
|
||||
* |-------------------------------------------------------------------------------|
|
||||
* | | | | | | | | | | | | | | | | | | |
|
||||
* |-------------------------------------------------------------------------------|
|
||||
* | | | | | | | | | | | | | | | | | | |
|
||||
* |-------------------------------------------------------------------------------|
|
||||
* | | | | | | | | | | | | | |
|
||||
* `-------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_FL2] = KEYMAP(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||
|
||||
|
||||
};
|
||||
|
||||
|
||||
void matrix_init_user(void) {
|
||||
}
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
}
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
return true;
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
|
||||
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
|
||||
DDRA |= (1 << 3); PORTA |= (1 << 3);
|
||||
} else {
|
||||
DDRA &= ~(1 << 3); PORTA &= ~(1 << 3);
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_COMPOSE)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_KANA)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
}
|
||||
@ -0,0 +1,16 @@
|
||||
# UK78
|
||||
|
||||
|
||||
|
||||
A fully customizable 60%+numpad keyboard.
|
||||
|
||||
* Keyboard Maintainer: [Rozakiin](https://github.com/rozakiin)
|
||||
* Hardware Supported: UK78 PCB
|
||||
* rev2
|
||||
* Hardware Availability: [ukkeyboards.](https://clueboard.co/)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make uk78-default
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
||||
@ -0,0 +1,56 @@
|
||||
# MCU name
|
||||
MCU = at90usb1286
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=8192
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= no # Commands for debug and configuration
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
AUDIO_ENABLE ?= no
|
||||
RGBLIGHT_ENABLE ?= yes
|
||||
@ -0,0 +1 @@
|
||||
#include "uk78.h"
|
||||
@ -0,0 +1,20 @@
|
||||
#ifndef UK78_H
|
||||
#define UK78_H
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define KEYMAP( \
|
||||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, K018, \
|
||||
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K114, K115, K116, K117, K118, \
|
||||
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, K215, K216, K217, K218, \
|
||||
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317, K318, \
|
||||
K400, K401, K402, K406, K410, K411, K412, K413, K414, K415, K416, K417, K418 \
|
||||
) { \
|
||||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, K018 }, \
|
||||
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO, K114, K115, K116, K117, K118 }, \
|
||||
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, KC_NO, K214, K215, K216, K217, K218 }, \
|
||||
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317, K318 }, \
|
||||
{ K400, K401, K402, KC_NO, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, K412, K413, K414, K415, K416, K417, K418 } \
|
||||
}
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue