You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/minidox/keymaps/khitsule/keymap.c

71 lines
2.8 KiB
C

#include "minidox.h"
#include "action_layer.h"
#include "eeconfig.h"
extern keymap_config_t keymap_config;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _QWERTY 0
#define _LOWER 1
#define _RAISE 2
#define _ADJUST 16
enum custom_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
ADJUST,
};
// Fillers to make layering more clear
#define _______ KC_TRNS
#define XXXXXXX KC_NO
// Defines for task manager and such
#define CALTDEL LCTL(LALT(KC_DEL))
#define TSKMGR LCTL(LSFT(KC_ESC))
#define DSK_LFT LGUI(LCTL(KC_LEFT))
#define DSK_RT LGUI(LCTL(KC_RIGHT))
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT( \
KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \
KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, \
KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, \
ALT_T(KC_ENT), LT(_LOWER, KC_TAB), CTL_T(KC_SPC), SFT_T(KC_BSPC), LT(_RAISE, KC_DEL), KC_LGUI \
),
[_RAISE] = LAYOUT( \
KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_PLUS, KC_7, KC_8, KC_9, KC_0, \
KC_CIRC, KC_AMPR, KC_TILD, KC_PIPE, KC_BSLS, KC_MINUS, KC_4, KC_5, KC_6, KC_EQL, \
KC_DQT, KC_QUOT, KC_UNDS, KC_GRV, _______, KC_ASTR, KC_1, KC_2, KC_3, _______, \
_______, MO(_ADJUST), _______, _______, _______, _______ \
),
[_LOWER] = LAYOUT( \
KC_ESC, KC_HOME, KC_UP, KC_END, _______, KC_LPRN, KC_RPRN, _______, _______, _______,
KC_VOLU, KC_LEFT, KC_DOWN, KC_RIGHT, KC_PGUP, KC_LBRC, KC_RBRC, _______, _______, _______, \
KC_VOLD, KC_MPRV, KC_MPLY, KC_MNXT, KC_PGDN, KC_LCBR, KC_RCBR, _______, _______, _______, \
_______, _______, _______, _______, MO(_ADJUST), _______ \
),
[_ADJUST] = LAYOUT( \
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, \
_______, DSK_LFT, _______, DSK_RT, _______, TSKMGR, CALTDEL, _______, KC_F11, KC_F12, \
RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
_______, _______, _______, _______, _______, _______ \
)
};
void persistant_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}