You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboard/ghost_squid
Vlastimil Ovčáčík a6d33e2c98 Added support for The Ghost Squid controller used for CM XT keyboard.
- initial commit
- created as clone of the kitten_paw subproject with pins adjusted for CM
  XT
10 years ago
..
Makefile.lufa Added support for The Ghost Squid controller used for CM XT keyboard. 10 years ago
README.md Added support for The Ghost Squid controller used for CM XT keyboard. 10 years ago
config.h Added support for The Ghost Squid controller used for CM XT keyboard. 10 years ago
keymap.c Added support for The Ghost Squid controller used for CM XT keyboard. 10 years ago
keymap_ansi.h Added support for The Ghost Squid controller used for CM XT keyboard. 10 years ago
led.c Added support for The Ghost Squid controller used for CM XT keyboard. 10 years ago
matrix.c Added support for The Ghost Squid controller used for CM XT keyboard. 10 years ago

README.md

The Ghost Squid controller

Custom controller for the Cooler Master QuickFire XT keyboard designed by bpiphany.

Note that this is not the official firmware

Build

Move to this directory then just run make like:

$ make -f Makefile.lufa

At the moment only the LUFA stack is supported.

Bootloader

To enter bootloader by hardware use a magnet above the controller before connecting the usb cable.

It is still possible to use Boot Magic and Command (LSFT+RSFT+PAUS) to access the bootloader though.