You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
319 lines
11 KiB
C
319 lines
11 KiB
C
/*
|
|
Copyright 2016 flabbergast <s3+flabbergast@sdfeu.org>
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/*
|
|
* LED controller code
|
|
* WF uses IS31FL3731C matrix LED driver from ISSI
|
|
* datasheet: http://www.issi.com/WW/pdf/31FL3731C.pdf
|
|
*/
|
|
|
|
#include "ch.h"
|
|
#include "hal.h"
|
|
#include "print.h"
|
|
|
|
#include "led_controller.h"
|
|
|
|
#include "suspend.h"
|
|
|
|
#include "usb_main.h"
|
|
|
|
/* Infinity60 LED MAP
|
|
- digits mean "row" and "col", i.e. 45 means C4-5 in the IS31 datasheet, matrix A
|
|
|
|
11 12 13 14 15 16 17 18 21 22 23 24 25 26 27*
|
|
28 31 32 33 34 35 36 37 38 41 42 43 44 45
|
|
46 47 48 51 52 53 54 55 56 57 58 61 62
|
|
63 64 65 66 67 68 71 72 73 74 75 76 77*
|
|
78 81 82 83 84 85 86 87
|
|
|
|
*Unused in Alphabet Layout
|
|
*/
|
|
|
|
/*
|
|
each page has 0xB4 bytes
|
|
0 - 0x11: LED control (on/off):
|
|
order: CA1, CB1, CA2, CB2, .... (CA - matrix A, CB - matrix B)
|
|
CAn controls Cn-8 .. Cn-1 (LSbit)
|
|
0x12 - 0x23: blink control (like "LED control")
|
|
0x24 - 0xB3: PWM control: byte per LED, 0xFF max on
|
|
order same as above (CA 1st row (8bytes), CB 1st row (8bytes), ...)
|
|
*/
|
|
|
|
/* Which LED should be used for CAPS LOCK indicator
|
|
* The usual Caps Lock position is C4-6, so the address is
|
|
* 0x24 + (4-1)*0x10 + (8-1) = 0x59 */
|
|
#if !defined(CAPS_LOCK_LED_ADDRESS)
|
|
#define CAPS_LOCK_LED_ADDRESS 0x59
|
|
#endif
|
|
|
|
/* Which LED should breathe during sleep */
|
|
#if !defined(BREATHE_LED_ADDRESS)
|
|
#define BREATHE_LED_ADDRESS CAPS_LOCK_LED_ADDRESS
|
|
#endif
|
|
|
|
/* =================
|
|
* ChibiOS I2C setup
|
|
* ================= */
|
|
static const I2CConfig i2ccfg = {
|
|
400000 // clock speed (Hz); 400kHz max for IS31
|
|
};
|
|
|
|
/* ==============
|
|
* variables
|
|
* ============== */
|
|
// internal communication buffers
|
|
uint8_t tx[2] __attribute__((aligned(2)));
|
|
uint8_t rx[1] __attribute__((aligned(2)));
|
|
|
|
// buffer for sending the whole page at once (used also as a temp buffer)
|
|
uint8_t full_page[0xB4+1] = {0};
|
|
|
|
// LED mask (which LEDs are present, selected by bits)
|
|
// See page comment above, control alternates CA matrix/CB matrix
|
|
// IC60 pcb uses only CA matrix.
|
|
// Each byte is a control pin for 8 leds 8-1
|
|
const uint8_t is31_ic60_leds_mask[0x12] = {
|
|
0xFF, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0xFF,
|
|
0x00, 0xFF, 0x00, 0xFF, 0x00, 0x7F, 0x00, 0x00, 0x00
|
|
};
|
|
|
|
/* ============================
|
|
* communication functions
|
|
* ============================ */
|
|
msg_t is31_select_page(uint8_t page) {
|
|
tx[0] = IS31_COMMANDREGISTER;
|
|
tx[1] = page;
|
|
return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 2, NULL, 0, US2ST(IS31_TIMEOUT));
|
|
}
|
|
|
|
msg_t is31_write_data(uint8_t page, uint8_t *buffer, uint8_t size) {
|
|
is31_select_page(page);
|
|
return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, buffer, size, NULL, 0, US2ST(IS31_TIMEOUT));
|
|
}
|
|
|
|
msg_t is31_write_register(uint8_t page, uint8_t reg, uint8_t data) {
|
|
is31_select_page(page);
|
|
tx[0] = reg;
|
|
tx[1] = data;
|
|
return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 2, NULL, 0, US2ST(IS31_TIMEOUT));
|
|
}
|
|
|
|
msg_t is31_read_register(uint8_t page, uint8_t reg, uint8_t *result) {
|
|
is31_select_page(page);
|
|
|
|
tx[0] = reg;
|
|
return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 1, result, 1, US2ST(IS31_TIMEOUT));
|
|
}
|
|
|
|
/* ========================
|
|
* initialise the IS31 chip
|
|
* ======================== */
|
|
void is31_init(void) {
|
|
// just to be sure that it's all zeroes
|
|
__builtin_memset(full_page,0,0xB4+1);
|
|
// zero function page, all registers (assuming full_page is all zeroes)
|
|
is31_write_data(IS31_FUNCTIONREG, full_page, 0xD + 1);
|
|
// disable hardware shutdown
|
|
palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
|
|
palSetPad(GPIOB, 16);
|
|
chThdSleepMilliseconds(10);
|
|
// software shutdown
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, 0);
|
|
chThdSleepMilliseconds(10);
|
|
// TODO: This already done above, remove?
|
|
// zero function page, all registers
|
|
is31_write_data(IS31_FUNCTIONREG, full_page, 0xD + 1);
|
|
chThdSleepMilliseconds(10);
|
|
// software shutdown disable (i.e. turn stuff on)
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
|
|
chThdSleepMilliseconds(10);
|
|
// zero all LED registers on all 8 pages
|
|
uint8_t i;
|
|
for(i=0; i<8; i++) {
|
|
is31_write_data(i, full_page, 0xB4 + 1);
|
|
chThdSleepMilliseconds(1);
|
|
}
|
|
}
|
|
|
|
/* ==================
|
|
* LED control thread
|
|
* ================== */
|
|
#define LED_MAILBOX_NUM_MSGS 5
|
|
static msg_t led_mailbox_queue[LED_MAILBOX_NUM_MSGS];
|
|
mailbox_t led_mailbox;
|
|
static THD_WORKING_AREA(waLEDthread, 256);
|
|
static THD_FUNCTION(LEDthread, arg) {
|
|
(void)arg;
|
|
chRegSetThreadName("LEDthread");
|
|
|
|
uint8_t i;
|
|
uint8_t temp, pwm;
|
|
uint8_t save_page, save_breath1, save_breath2;
|
|
msg_t msg, retval;
|
|
|
|
while(true) {
|
|
// wait for a message (asynchronous)
|
|
// (messages are queued (up to LED_MAILBOX_NUM_MSGS) if they can't
|
|
// be processed right away)
|
|
chMBFetch(&led_mailbox, &msg, TIME_INFINITE);
|
|
|
|
// process 'msg' here
|
|
// if msg between 0-7, then process as page#, otherwise a specific LED address
|
|
xprintf("--------------------\n");
|
|
xprintf("mailbox fetch\ntemp: %X - msg: %X\n", temp, msg);
|
|
if (msg < 8) {
|
|
|
|
// read current page into 'temp'
|
|
is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp);
|
|
chThdSleepMilliseconds(1);
|
|
// If page is already in layer, switch off (layer 0)
|
|
xprintf("Layer: post-read\ntemp: %X\n", temp);
|
|
if(temp == msg) {
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 0);
|
|
} else {
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, msg);
|
|
}
|
|
xprintf("Layer: post-change\ntemp: %X\n", temp);
|
|
|
|
} else {
|
|
|
|
switch(msg) {
|
|
//TODO: make this generic and able to turn on/off any address and loop through all(or current) pages
|
|
//TODO: set number of layers somewhere and loop through all when setting specific led
|
|
case LED_MSG_SLEEP_LED_ON:
|
|
// save current settings
|
|
is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &save_page);
|
|
is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, &save_breath1);
|
|
is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, &save_breath2);
|
|
// use pages 7 and 8 for (hardware) breathing (assuming they're empty)
|
|
is31_write_register(6, BREATHE_LED_ADDRESS, 0xFF);
|
|
is31_write_register(7, BREATHE_LED_ADDRESS, 0x00);
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (6<<4)|6);
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3);
|
|
retval = MSG_TIMEOUT;
|
|
temp = 6;
|
|
while(retval == MSG_TIMEOUT) {
|
|
// switch to the other page
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, temp);
|
|
temp = (temp == 6 ? 7 : 6);
|
|
// the times should be sufficiently long for IS31 to finish switching pages
|
|
retval = chMBFetch(&led_mailbox, &msg, MS2ST(temp == 6 ? 4000 : 6000));
|
|
}
|
|
// received a message (should be a wakeup), so restore previous state
|
|
chThdSleepMilliseconds(3000); // need to wait until the page change finishes
|
|
// note: any other messages are queued
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, save_breath1);
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, save_breath2);
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, save_page);
|
|
break;
|
|
case LED_MSG_SLEEP_LED_OFF:
|
|
// should not get here; wakeup should be received in the branch above break;
|
|
break;
|
|
default:
|
|
if(msg >= 0x24) {
|
|
xprintf("Power pre-read\ntemp: %X - msg: %X - pwm: %X\n", temp, msg, pwm);
|
|
is31_read_register(0, msg, &temp);
|
|
chThdSleepMilliseconds(10);
|
|
xprintf("Post-read\ntemp: %X - msg: %X - pwm: %X\n", temp, msg, pwm);
|
|
chThdSleepMilliseconds(10);
|
|
pwm = (temp > 0x00 ? 0x00 : 0xFF);
|
|
xprintf("pwm after: %X\n", pwm);
|
|
chThdSleepMilliseconds(10);
|
|
for(i=0; i<8; i++) {
|
|
is31_write_register(i, msg, pwm);
|
|
}
|
|
xprintf("Power post-change\ntemp: %X - msg: %X - pwm: %X\n", temp, msg, pwm);
|
|
chThdSleepMilliseconds(10);
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
xprintf("--------------------\n");
|
|
}
|
|
}
|
|
/* =====================
|
|
* hook into user keymap
|
|
* ===================== */
|
|
void led_controller_init(void) {
|
|
uint8_t i;
|
|
|
|
xprintf("led_controller_init");
|
|
/* initialise I2C */
|
|
/* I2C pins */
|
|
palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
|
|
palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
|
|
/* start I2C */
|
|
i2cStart(&I2CD1, &i2ccfg);
|
|
// try high drive (from kiibohd)
|
|
I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
|
|
// try glitch fixing (from kiibohd)
|
|
I2CD1.i2c->FLT = 4;
|
|
|
|
chThdSleepMilliseconds(10);
|
|
|
|
/* initialise IS31 chip */
|
|
is31_init();
|
|
|
|
/* enable LEDs on all pages */
|
|
full_page[0] = 0;
|
|
__builtin_memcpy(full_page+1, is31_ic60_leds_mask, 0x12);
|
|
for(i=0; i<8; i++) {
|
|
is31_write_data(i, full_page, 1+0x12);
|
|
}
|
|
|
|
/* enable breathing when the displayed page changes */
|
|
// Fade-in Fade-out, time = 26ms * 2^N, N=3
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (3<<4)|3);
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3);
|
|
|
|
// clean up the capslock LED
|
|
is31_write_register(1, CAPS_LOCK_LED_ADDRESS, 0);
|
|
is31_write_register(2, CAPS_LOCK_LED_ADDRESS, 0);
|
|
|
|
/* more time consuming LED processing should be offloaded into
|
|
* a thread, with asynchronous messaging. */
|
|
chMBObjectInit(&led_mailbox, led_mailbox_queue, LED_MAILBOX_NUM_MSGS);
|
|
chThdCreateStatic(waLEDthread, sizeof(waLEDthread), LOWPRIO, LEDthread, NULL);
|
|
}
|
|
|
|
//TODO: Don't know equivalent QMK hooks for these
|
|
//
|
|
//void hook_usb_suspend_entry(void) {
|
|
//#ifdef SLEEP_LED_ENABLE
|
|
// chSysLockFromISR();
|
|
// chMBPostI(&led_mailbox, LED_MSG_SLEEP_LED_ON);
|
|
// chSysUnlockFromISR();
|
|
//#endif /* SLEEP_LED_ENABLE */
|
|
//}
|
|
//
|
|
//void hook_usb_suspend_loop(void) {
|
|
// chThdSleepMilliseconds(100);
|
|
// /* Remote wakeup */
|
|
// if((USB_DRIVER.status & 2) && suspend_wakeup_condition()) {
|
|
// send_remote_wakeup(&USB_DRIVER);
|
|
// }
|
|
//}
|
|
//
|
|
//void hook_usb_wakeup(void) {
|
|
//#ifdef SLEEP_LED_ENABLE
|
|
// chSysLockFromISR();
|
|
// chMBPostI(&led_mailbox, LED_MSG_SLEEP_LED_OFF);
|
|
// chSysUnlockFromISR();
|
|
//#endif /* SLEEP_LED_ENABLE */
|
|
//}
|
|
//*/
|