a67c930e9e
* Duplicate default layout as basis of my own * Basic Colemak layer, just to practice flashing * Add reset button so that we don't have to short out the reset button on the board to flash it. * Symbols layer * Navigation layer, and remove unused keys. Now usable, nice. * Correct backspace for UK QWERTY mapping * Small clarification in XD75RE readme instructions * Use UK pipe so that I can type a pipe on a UK keyboard |
7 years ago | |
---|---|---|
.. | ||
keymaps | 7 years ago | |
config.h | 7 years ago | |
readme.md | 7 years ago | |
rules.mk | 7 years ago | |
xd75.c | 8 years ago | |
xd75.h | 7 years ago |
readme.md
xd75 keyboard firmware
The XD75Re is a 15x5 full-grid ortholinear keyboard manufactured by XIUDI. This port of the QMK firmware is my first shot at using QMK, so if you see any features done wrong (or just plain missing), feel free to fix them and put in a pull request!
Quantum MK Firmware
For more info on this firmware (and how to make it your own), head over to qmk.fm.
Building
Download or clone the whole firmware and navigate to the
keyboards/xd75 folder. Once your dev env is setup, you'll be able to
type make
to generate your .hex - you can then use the Teensy Loader
to install the resulting .hex file, or have the make
process install
it using DFU.
Default
To build with the default keymap, simply run make xd75-default
from the root directory (i.e. two levels above this file), and to install via DFU, make xd75-default-dfu
, also from the root directory.
Note that DFU is likely to require root permissions, so installing the firmware likely requires a command line like:
$ sudo make xd75-default-dfu
Other Keymaps
The "default" keymap included is basically the OLKB Atomic keymap with a few buttons added for RGB underglow control. This should be usable as a starting point, but most people will be best served creating their own keymap and flashing it - more info on creating your own keymap is available in the official QMK documentation.
Keymaps follow the format <name>.c and are stored in
subdirectories under keyboards/xd75/keymaps
To build the firmware binary hex file for a specific keymap, and
install it, using DFU, just do make
with a keymap like this:
$ make xd75-[default|<name>]