You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/mechmini
Jack Humbert 9fdc276260
Updates bootloader settings, adds file size check (#2029)
* pull fuse settings for bootloader jump

* fix 32a chips

* make automatic bootloader selection optional

* quantify bootloaders

* fixs #164, speeds up dfu reset

* fix for chips w/o usb

* missing an n

* fix bootloader sizes, use words for addresses

* fix bmini, pearl, and [[ issue, make things quiet

* ignore avr errors on arm for now

* update settings for the light

* document bootloader stuff

* add bootloader title
7 years ago
..
keymaps/default Updated RGB code to use event.pressed 7 years ago
README.md Make arguments redo, subproject elimination (#1784) 7 years ago
config.h Updates bootloader settings, adds file size check (#2029) 7 years ago
i2c.c Got luizribeiro's ps2avrgb implementation working for Mechmini 7 years ago
i2c.h Got luizribeiro's ps2avrgb implementation working for Mechmini 7 years ago
matrix.c Got luizribeiro's ps2avrgb implementation working for Mechmini 7 years ago
mechmini.c Splits up ps2avrGB boards into their own folders (#2014) 7 years ago
mechmini.h Splits up ps2avrGB boards into their own folders (#2014) 7 years ago
readme.md Splits up ps2avrGB boards into their own folders (#2014) 7 years ago
rules.mk Updates bootloader settings, adds file size check (#2029) 7 years ago
usbconfig.h Update Mechmini keymap, reduce reported power consumption for iOS Camera Adapter compatibility 7 years ago

readme.md

mechmini

A compact ortholinear/staggered keyboard.

Keyboard Maintainer: QMK Community Hardware Supported: mechmini PCB Hardware Availability: https://mechkeys.ca/collections/keyboards/products/mechmini-2-0-pcb

Make example for this keyboard (after setting up your build environment):

make mechmini:default

See build environment setup then the make instructions for more information.

Mechmini Notes

Note that this is a complete replacement for the firmware, so you won't be using Bootmapper Client to change any keyboard settings, since not all the USB report options are supported.

Installing

First, install the requirements. These commands are for OSX, but all you need is the AVR toolchain and bootloadHID for flashing:

$ brew cask install crosspack-avr
$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb

In order to use the ./program script, which can reboot the board into the bootloader, you'll need Python 2 with PyUSB installed:

$ pip install pyusb

Then, with the keyboard plugged in, simply run this command from the qmk_firmware directory:

$ make mechmini:program

If you prefer, you can just build it and flash the firmware directly with bootloadHID if you boot the board while holding down L_Ctrl to keep it in the bootloader:

$ make mechmini
$ bootloadHID -r mechmini_default.hex

Troubleshooting

From my experience, it's really hard to brick these boards. But these tricks have been useful when it got stuck in a weird scenario.

  1. Try plugging the board in while pressing L_Ctrl. This will force it to boot only the bootloader without loading the firmware. Once this is done, just reflash the board with the original firmware.
  2. Sometimes USB hubs can act weird, so try connecting the board directly to your computer or plugging/unplugging the USB hub.