You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/planck/keymaps/steno
Joe Wasson 5987f67989 Add TX Bolt protocol support for Stenography
Requires virtser; Allows QMK to speak the TX BOlt protocol used by stenography machines and software (such as Plover). The upside is that Plover can be configured to listen only to TX Bolt allow the keyboard to switch layers without need to enable/disable the Plover software, or to have a second non-Steno keyboard work concurrently.
8 years ago
..
Makefile Add TX Bolt protocol support for Stenography 8 years ago
config.h Add TX Bolt protocol support for Stenography 8 years ago
keymap.c Add TX Bolt protocol support for Stenography 8 years ago
readme.md Add TX Bolt protocol support for Stenography 8 years ago

readme.md

The Default Planck Layout with TX Bolt for the Plover Layer

To use set Plover to TX Bolt and select the COM port that represents your keyboard.