You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/handwired/arrow_pad/keymaps/default/keymap.c

162 lines
4.5 KiB
C

#include "arrow_pad.h"
#include "led.h"
// This is the 21-key keypad to 2x11 element matrix mapping
#define LAYOUT( \
KM_ESC, KM_TAB, KM_BSL, KM_ARR, \
KM_NUM, KM_FSL, KM_AST, KM_MIN, \
KM___7, KM___8, KM___9, KM_EQU, \
KM___4, KM___5, KM___6, KM_PLS, \
KM___1, KM___2, KM___3, ___ENT, \
KM___0, _____0, KM_DOT, KM_ENT \
) { \
{ KM_ESC, KM_TAB, KM_BSL, KM_ARR }, \
{ KM_NUM, KM_FSL, KM_AST, KM_MIN }, \
{ KM___7, KM___8, KM___9, KM_EQU }, \
{ KM___4, KM___5, KM___6, KM_PLS }, \
{ KM___1, KM___2, KM___3, KC_NO }, \
{ KM___0, KC_NO, KM_DOT, KM_ENT } \
}
#define LAYER_BASE 0
#define LAYER_EDIT 1
#define LAYER_FUNCTION 2
#define MACRO_COPY_CUT 0
#define MACRO_SHIFT_CONTROL 1
#define MACRO_CONTROL_ALT 2
#define M_COPY KC_FN5
#define M_SHFCT KC_FN6
#define M_CTALT KC_FN7
#define SC_UNDO LCTL(KC_Z)
#define SC_REDO LCTL(KC_Y)
#define SC_CUT LCTL(KC_X)
#define SC_COPY LCTL(KC_C)
#define SC_PSTE LCTL(KC_V)
#define SC_SELA LCTL(KC_A)
#define SC_SAVE LCTL(KC_S)
#define SC_OPEN LCTL(KC_O)
#define SC_ACLS LALT(KC_F4)
#define SC_CCLS LCTL(KC_F4)
#define _______ KC_TRNS
#define XXXXXXX KC_NO
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[LAYER_BASE] = LAYOUT( \
KC_ESC, KC_TAB, KC_BSLS, KC_FN0, \
KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
KC_P7, KC_P8, KC_P9, KC_PEQL, \
KC_P4, KC_P5, KC_P6, KC_PPLS, \
KC_P1, KC_P2, KC_P3, XXXXXXX, \
KC_P0, KC_PCMM, KC_PDOT, KC_PENT ),
[LAYER_EDIT] = LAYOUT( \
KC_ESC, KC_TAB, KC_SPC, _______, \
KC_FN1, SC_PSTE, SC_REDO, SC_UNDO, \
KC_HOME, KC_UP, KC_PGUP, KC_LALT, \
KC_LEFT, M_COPY, KC_RGHT, KC_LCTL, \
KC_END, KC_DOWN, KC_PGDN, XXXXXXX, \
KC_BSPC, KC_PENT, KC_DEL, M_SHFCT),
[LAYER_FUNCTION] = LAYOUT( \
KC_FN2, KC_FN3, KC_FN4, _______, \
KC_FN1, _______, _______, _______, \
_______, _______, _______, _______, \
_______, _______, _______, _______, \
_______, _______, _______, XXXXXXX, \
RESET, _______, _______, _______ ),
};
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_LAYER_MOMENTARY(LAYER_FUNCTION),
[1] = ACTION_LAYER_TOGGLE(LAYER_EDIT),
[2] = ACTION_BACKLIGHT_TOGGLE(),
[3] = ACTION_BACKLIGHT_INCREASE(),
[4] = ACTION_BACKLIGHT_DECREASE(),
[5] = ACTION_MACRO_TAP(MACRO_COPY_CUT),
[6] = ACTION_MACRO_TAP(MACRO_SHIFT_CONTROL),
[7] = ACTION_MACRO_TAP(MACRO_CONTROL_ALT),
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
{
}
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
switch (id) {
case MACRO_COPY_CUT:
if (record->event.pressed) {
register_code(KC_LCTL);
if (record->tap.count == 1) {
register_code(KC_C);
unregister_code(KC_C);
}
else if (record->tap.count == 2) {
register_code(KC_X);
unregister_code(KC_X);
}
unregister_code(KC_LCTL);
}
break;
case MACRO_SHIFT_CONTROL:
if (record->event.pressed) {
if (record->tap.count <= 2) register_mods(MOD_BIT(KC_LSFT));
if (record->tap.count == 2) register_mods(MOD_BIT(KC_LCTL));
if (record->tap.count == 3) register_code(KC_PENT);;
}
else {
unregister_mods(MOD_BIT(KC_LSFT) | MOD_BIT(KC_LCTL));
unregister_code(KC_PENT);
}
break;
case MACRO_CONTROL_ALT:
if (record->event.pressed) {
if (record->tap.count < 2) register_mods(MOD_BIT(KC_LCTL));
if (record->tap.count >= 2) register_mods(MOD_BIT(KC_LALT));
}
else {
unregister_mods(MOD_BIT(KC_LCTL) | MOD_BIT(KC_LALT));
}
break;
}
return MACRO_NONE;
}
void led_set_user(uint8_t usb_led)
{
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
// output high
DDRD |= (1<<6);
PORTD |= (1<<6);
} else {
// Hi-Z
DDRD &= ~(1<<6);
PORTD &= ~(1<<6);
}
if (usb_led & (1<<USB_LED_NUM_LOCK)) {
// output low
DDRC |= (1<<7);
PORTC |= ~(1<<7);
} else {
// Hi-Z
DDRC &= ~(1<<7);
PORTC &= ~(1<<7);
}
}