You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboard/planck/keymaps/cbbrowne/keymap.c

143 lines
6.1 KiB
C

#include "planck.h"
#ifdef BACKLIGHT_ENABLE
#include "backlight.h"
#endif
/* Each layer is given a name to aid in readability, which is then
used in the keymap matrix below. The underscores do not denote
anything - you can have a layer called STUFF or any other name.
Layer names don't all need to be of the same length, obviously, and
you could also skip them entirely and just use numbers, though that
means needing to manage the numbers.
It is preferable to keep the symbols short so that a line worth of
key mappings fits compactly onto a line of code. */
/* This was originally based on planck/keymaps/default/default.c, and
then cbbrowne has revised things */
/* Things I did not like about the default mapping
- I find control too hard to get to. I think I'll want it on a
left finger. Gonna need to lose something to do that...
- Almost certainly, KC_LCTL should be on [2][1]
- having dash on [lower-j] is a bit nonintuitive, but may be OK
- I'll bet I should switch ESC/TAB
- I'm suspicious that I want to shift M(0) from [4][1] to [4][2],
and shift ESC off the first column so KC_LCTL and KC_LALT can
be on the first column.
- I think I wanna swap ' and ENTER
- All of the above are done :-)
- I'm keeping Colemak and Dvorak around for reference, and added
Workman just for fun. They're useless to me, though.
*/
/* Other things to do...
- Need to think about what zsh and readline actions I use lots
- Wanna figure out macros, so I can put in a "cbbrowne" macro
- Ought to ensure that Control-Alt-Delete is convenient enough
- How about Alt-F1 thru Alt-F8?
- What's the keystroke to get from X to console these days?
- I do indeed want a sweet number pad!
- A layer for doing console switching would not be a bad idea
*/
enum layers {
_QW = 0, /* Qwerty mapping */
_CM, /* Colemak */
_DV, /* Dvorak */
_WK, /* Workman */
_LW, /* Lower layer, where top line has symbols !@#$%^&*() */
_RS, /* Raised layer, where top line has digits 1234567890 */
_KP, /* Key pad */
};
/* Note that Planck has dimensions 4 rows x 12 columns */
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QW] = { /* Qwerty */
{KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
{KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT},
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT },
{KC_TAB, M(0), KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
},
[_CM] = { /* Colemak */
{KC_ESC, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC},
{KC_LCTL, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT},
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT },
{KC_TAB, M(0), KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
},
[_DV] = { /* Dvorak */
{KC_ESC, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC},
{KC_LCTL, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH},
{KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT },
{KC_TAB, M(0), KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
},
[_WK] = { /* Workman */
{KC_ESC, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_SCLN, KC_BSPC},
{KC_LCTL, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, KC_ENT},
{KC_LSFT, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT },
{KC_TAB, M(0), KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
},
[_RS] = { /* RAISE */
{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
{KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS},
{KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_CM), DF(_WK), RESET, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
},
[_LW] = { /* LOWER */
{KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC},
{KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
{KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_CM), DF(_WK), RESET, KC_TRNS},
{KC_TRNS, DF(_KP), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
},
[_KP] = { /* Key Pad */
{KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_KP_ENTER, KC_KP_PLUS, KC_KP_PLUS, KC_KP_ENTER, KC_KP_ENTER},
{KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_KP_MINUS, KC_7, KC_8, KC_9, KC_KP_DOT},
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_KP_PLUS, KC_4, KC_5, KC_6, KC_0},
{BL_STEP, M(0), KC_LALT, KC_LGUI, KC_NO, KC_SPC, KC_SPC, DF(_QW), KC_1, KC_2, KC_3, KC_0}
}
};
/* I'm planning to use this to set up some macros, including one to
expand into "cbbrowne", more to prove it can be done than anything
else.
*/
enum macro_id {
M_P0,
M_P1,
M_P2,
M_P3,
M_P4,
M_P5,
M_USERNAME
};
const uint16_t PROGMEM fn_actions[] = {
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
switch(id) {
case 0:
if (record->event.pressed) {
register_code(KC_RSFT);
#ifdef BACKLIGHT_ENABLE
backlight_step();
#endif
} else {
unregister_code(KC_RSFT);
}
break;
}
return MACRO_NONE;
};