You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/meira/keymaps/grahampheath
Cole Markham bd1ad405bf Update Meira for revision 1.1 to enable backlighting by default (#2468)
* Update Meira for revision 1.1 to enable backlighting by default

* Updates to fix other keymaps
7 years ago
..
config.h Graham's Keymaps. (#2422) 7 years ago
keymap.c Graham's Keymaps. (#2422) 7 years ago
readme.md Graham's Keymaps. (#2422) 7 years ago
rules.mk Update Meira for revision 1.1 to enable backlighting by default (#2468) 7 years ago

readme.md

Graham's Meira.

Don't expect this to work for you unaltered! For the record, these are my notes, not a guide for you :-)

Known issues:

Anything over 28k will begin to overwrite the boot loader, which is a pain!

Be sure to check file size with:

avr-size meira_promicro_grahampheath.hex

Sounds

I've added a 8ohm 0.5W speaker, its a bit large, but it fits in approximately the same space as the ProMicro. I soldered directly to PC6 and GND.

As the Meira code stood, adding sound increased the hex beyond what the boot loader could handle, so I had to dial way back on features that I wasnt using, like backlighting and RGB support. I also removed function keys, though I think you could restore some of these features, you certainly can't restore all of them and still fit with a boot loader.

Build

Built for the ProMicro with:

make meira/promicro:grahampheath

Build and upload with, which is cool because it will sense your port.

make meira/promicro:grahampheath:avrdude

Program a hex directly with:

avrdude -p atmega32u4 -P /dev/tty.usbmodem14111 -c avr109 -v -e -D -U flash:w:meira_promicro_grahampheath.hex

If you use an AVRISP you will be program a hex without a boot loader:

avrdude -p atmega32u4 -P /dev/tty.usbmodem14111 -c avrisp -v -e -U flash:w:meira_promicro_grahampheath.hex

Bricked

Did you overwrite your boot loader?

I did...

I used an Ardunio as an ISP, and was able to program various boot loaders. Ultimately it seemed like this was the right combo:

ProMicro pinout

Wiring: via u/dmjlambert

ProMicro boot loader hex is called Caterina-promicro16.hex and is stored on Sparkfun's GitHub

avrdude -c avrisp -p m32u4 -P /dev/tty.usbmodem14141 -v -e -U flash:w:Caterina-promicro16.hex -U efuse:w:0xcb:m -U hfuse:w:0xd8:m -U lfuse:w:0xff:m