You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/converter/adb_usb
tmk b4e2d325f3 Change TOP_DIR to TMK_DIR in makefiles 10 years ago
..
Makefile Change TOP_DIR to TMK_DIR in makefiles 10 years ago
Makefile.pjrc Change TOP_DIR to TMK_DIR in makefiles 10 years ago
README.md Fix typo 'keyobard' #166 10 years ago
config.h Delete MOUSEKEY_DELAY_TIME in config.h 11 years ago
keymap_ansi.c Add ISO keymap(issue #35) and use new keymap API 11 years ago
keymap_common.c Change key_t to keypos_t 10 years ago
keymap_common.h Add ISO keymap(issue #35) and use new keymap API 11 years ago
keymap_hasu.c Add ISO keymap(issue #35) and use new keymap API 11 years ago
keymap_iso.c Add ISO keymap(issue #35) and use new keymap API 11 years ago
led.c Fix ADB led_set(); remove delay 11 years ago
matrix.c Fixed handling of ADB event with key down and key up for same key all in one 11 years ago

README.md

ADB to USB keyboard converter

This firmware converts ADB keyboard protocol to USB. You can use PJRC Teensy for this converter, though, other USB AVR(ATMega32U4, AT90USB64/128 or etc) should work. But binary size is about 10KB or more it doesn't fit into 8K flash like ATMega8U2.

Discuss: http://geekhack.org/showwiki.php?title=Island:14290

Wiring

  1. Connect ADB keyboard to Teensy by 3 lines(Vcc, GND, Data). By default Data line uses port PD0. This converter uses AVR's internal pull-up, but it seems to be too weak, in particular when you want to use a long or coiled cable. The external pull-up resistor(1K-10K Ohm) on Data is strongly recommended.
  2. Define following macros for ADB connection in config.h if you use other than port PD0. ADB_PORT, ADB_PIN, ADB_DDR, ADB_DATA_BIT
  3. make
  4. program Teensy

Build

Just make

$ make clean
$ make

If your keyboard is ISO layout

$ make KEYMAP=iso

LOCKING CAPSLOCK

Many of old ADB keyboards have mechanical push-lock switch for Capslock key and this converter supports the locking Capslock key by default. See README in top directory for more detail about this feature.

Also you may want to remove locking pin from the push-lock switch to use capslock as a normal momentary switch. http://www.youtube.com/watch?v=9wqnt2mGJ2Y

Keymap

You can change a keymap by editing code of keymap.c like following. This is a keymap for AEK, however, also used for other keyboards. How to define the keymap is probably obvious. You can find key symbols in keycode.h. If you want to define some keymaps than just one, see hhkb/keymap.c and macway/keymap.c as examples. Keymap(layer) switching may needs a bit of effort at this time.

/* Default Layer: plain keymap
 * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.             ,---.
 * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|             |Pwr|
 * `---'   `---------------' `---------------' `---------------' `-----------'             `---'
 * ,-----------------------------------------------------------. ,-----------. ,---------------.
 * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backspa| |Ins|Hom|PgU| |NmL|  =|  /|  *|
 * |-----------------------------------------------------------| |-----------| |---------------|
 * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \| |Del|End|PgD| |  7|  8|  9|  -|
 * |-----------------------------------------------------------| `-----------' |---------------|
 * |CapsLo|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |               |  4|  5|  6|  +|
 * |-----------------------------------------------------------|     ,---.     |---------------|
 * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift     |     |Up |     |  1|  2|  3|   |
 * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
 * |Ctrl |Alt |Gui |         Space             |Gui |Alt |Ctrl | |Lef|Dow|Rig| |      0|  .|   |
 * `-----------------------------------------------------------' `-----------' `---------------'
 */
KEYMAP(
ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,BRK,                    PWR,
GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,     INS, HOME,PGUP,    NLCK,EQL, PSLS,PAST,
TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS,     DEL, END, PGDN,    P7,  P8,  P9,  PMNS,
LCAP,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     ENT,                         P4,  P5,  P6,  PPLS,
LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,          RSFT,          UP,           P1,  P2,  P3,
LCTL,LGUI,LALT,          SPC,                                              LEFT,DOWN,RGHT,    P0,       PDOT,PENT
),

Magic command

To get help press h holding Magic key. Magic key is Power key.

Notes

Not-extended ADB keyboards have no discrimination between right modifier and left one, you will always see left control even if you press right control key. Apple Extended Keyboard and Apple Extended Keyboard II can discriminate both side modifiers except for GUI key(Windows/Command).

And most ADB keyboard has no diodes in its matrix so they are not NKRO, though ADB protocol itself supports it. See protocol/adb.c for more info.

If keyboard has ISO layout you need to use ISO keymap with make KEYMAP=iso. With ANSI keymap you will suffer from swapped keys problem.

https://github.com/tmk/tmk_keyboard/issues/35

EOF