You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/lets_split/keymaps/OLED_sample
MechMerlin 1f77868427 More Configurator Warning Fixes (#2716)
* mf68_ble did not have the correct .c and .h files

* Fix JC65 KEYMAP to LAYOUT

* Change KEYMAP to LAYOUT for s60_x

* Convert KEYMAP to LAYOUT for lets_split boards

* Convert KEYMAP to LAYOUT

* more fixes to keymap for iris

* convert KEYMAP to LAYOUT for levinson keyboard

* change losinggeneration's KEYMAP to LAYOUT

* convert KEYMAP to LAYOUT

* convert KEYMAP to LAYOUT for nyquist

* convert KEYMAP to LAYOUT

* convert KEYMAP to LAYOUT for viterbi

* convert KEYMAP to LAYOUT

* convert KEYMAP and its subsidiries to the LAYOUT standard

* convert KEYMAP and its subsidiries to the new LAYOUT standard
7 years ago
..
config.h Remove extra underscore from MASTER_RIGHT define 7 years ago
keymap.c More Configurator Warning Fixes (#2716) 7 years ago
readme.md Update readme.md 8 years ago
rules.mk Rename ONEHAND_ENABLE to SWAP_HANDS_ENABLE for consistency 7 years ago

readme.md

SSD1306 OLED Display via I2C

Features

Some features supported by the firmware:

  • I2C connection between the two halves is required as the OLED display will use this connection as well. Note this requires pull-up resistors on the data and clock lines.
  • OLED display will connect from either side

Wiring

Work in progress...

OLED Configuration

Work in progress...