You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/mitosis
Jack Humbert b476d65b9c Update keyboards' rules.mk/Makefiles (#1442)
this may change some of the keyboards' default settings - if you experience anything odd, please check back to this commit
7 years ago
..
keymaps/default First Commit 8 years ago
Makefile First Commit 8 years ago
config.h First Commit 8 years ago
matrix.c First Commit 8 years ago
mitosis.c First Commit 8 years ago
mitosis.h First Commit 8 years ago
readme.md Update readme.md 8 years ago
rules.mk Update keyboards' rules.mk/Makefiles (#1442) 7 years ago

readme.md

Mitosis Keyboard Firmware

These configuration files were based off the Atreus keyboard. It assumes a Pro Micro is being used, however retains the 'make upload' feature from the Atreus branch. This keyboard uses a completely different 'matrix scan' system to other keyboards, it relies on an external nRF51822 microcontroller maintaining a matrix of keystates received from the keyboard halves. The matrix.c file contains the code to poll the external microcontroller for the key matrix. As long as this file is not changed, all other QMK features are supported.

Build log of the keyboard can be found here

Hardware design files can be found here

Firmware for the nordic MCUs can be found here

Quantum MK Firmware

For the full Quantum feature list, see the parent readme.

Building

Download or clone the whole firmware and navigate to the keyboards/atreus folder. Once your dev env is setup, you'll be able to type make to generate your .hex - you can then use make dfu to program your PCB once you hit the reset button.

Depending on which keymap you would like to use, you will have to compile slightly differently.

Default

To build with the default keymap, simply run make default.

Other Keymaps

Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named <name>.c and see keymap document (you can find in top readme.md) and existent keymap files.

To build the firmware binary hex file with a keymap just do make with a keymap like this:

$ make [default|jack|<name>]

Keymaps follow the format <name>.c and are stored in the keymaps folder.