/** \file * * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ /** \mainpage USB LED Notifier Project * * \section Sec_Compat Demo Compatibility: * * The following list indicates what microcontrollers are compatible with this demo. * * \li AT90USB646 * * \section Sec_Info USB Information: * * The following table gives a rundown of the USB utilization of this demo. * * <table> * <tr> * <td><b>USB Mode:</b></td> * <td>Device</td> * </tr> * <tr> * <td><b>USB Class:</b></td> * <td>Communications Device Class (CDC)</td> * </tr> * <tr> * <td><b>USB Subclass:</b></td> * <td>Abstract Control Model (ACM)</td> * </tr> * <tr> * <td><b>Relevant Standards:</b></td> * <td>USBIF CDC Class Standard</td> * </tr> * <tr> * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> * * \section Sec_Description Project Description: * * USB LED Notifier Project. This project is designed for the Busware BUI board, however it can run easily on any * USB AVR. It is a generic RGB LED controller (via a three channel software PWM) which listens for commands from the * host on a CDC virtual serial port. When new commands are received, it updates the board LEDs. * * This can be controlled with any host application that can write to the virtual serial port, allowing it to become * a visual notification system for any number of custom host applications, such as a new unread email notifier. * * \section Sec_Options Project Options * * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value. * * <table> * <tr> * <td> * None * </td> * </tr> * </table> */