diff --git a/keyboards/contra/config.h b/keyboards/contra/config.h
new file mode 100755
index 00000000..85077ed4
--- /dev/null
+++ b/keyboards/contra/config.h
@@ -0,0 +1,58 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Cartel
+#define PRODUCT         Contra
+#define DESCRIPTION     Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { F6, B3, B2, B6 }
+#define MATRIX_COL_PINS { F4, F5, B5, B4, E6, D7, C6, D4, D0, D1, D2, D3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 0
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 0
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif
diff --git a/keyboards/contra/contra.c b/keyboards/contra/contra.c
new file mode 100755
index 00000000..3ef66a9c
--- /dev/null
+++ b/keyboards/contra/contra.c
@@ -0,0 +1 @@
+#include "contra.h"
diff --git a/keyboards/contra/contra.h b/keyboards/contra/contra.h
new file mode 100755
index 00000000..e9f9c541
--- /dev/null
+++ b/keyboards/contra/contra.h
@@ -0,0 +1,18 @@
+#ifndef KB_H
+#define KB_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211 }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311 }  \
+}
+
+#endif
\ No newline at end of file
diff --git a/keyboards/contra/keymaps/dana/config.h b/keyboards/contra/keymaps/dana/config.h
new file mode 100644
index 00000000..2846b579
--- /dev/null
+++ b/keyboards/contra/keymaps/dana/config.h
@@ -0,0 +1,30 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+
+#undef TAPPING_TERM
+#define TAPPING_TERM 190
+
+#define MUSIC_MASK (keycode != KC_NO)
+#define MIDI_ADVANCED
+
+#endif
diff --git a/keyboards/contra/keymaps/dana/keymap.c b/keyboards/contra/keymaps/dana/keymap.c
new file mode 100644
index 00000000..52949192
--- /dev/null
+++ b/keyboards/contra/keymaps/dana/keymap.c
@@ -0,0 +1,37 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "contra.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | `    |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Shift |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | Cmd  |Lower |    Space    |Raise | Enter| Cmd  |  Alt |Ctrl  |
+ * `-----------------------------------------------------------------------------------'
+ */
+[0] = {
+    { MI_C_4, MI_Cs_4, MI_D_4, MI_Ds_4, MI_E_4, MI_F_4, MI_Fs_4, MI_G_4, MI_Gs_4, MI_A_4, MI_As_4, MI_B_4 },
+    { MI_C_3, MI_Cs_3, MI_D_3, MI_Ds_3, MI_E_3, MI_F_3, MI_Fs_3, MI_G_3, MI_Gs_3, MI_A_3, MI_As_3, MI_B_3 },
+    { MI_C_2, MI_Cs_2, MI_D_2, MI_Ds_2, MI_E_2, MI_F_2, MI_Fs_2, MI_G_2, MI_Gs_2, MI_A_2, MI_As_2, MI_B_2 },
+    { MI_C_1, MI_Cs_1, MI_D_1, MI_Ds_1, MI_E_1, MI_F_1, MI_Fs_1, MI_G_1, MI_Gs_1, MI_A_1, MI_As_1, MI_B_1 }
+}
+};
+
+
+
+
diff --git a/keyboards/contra/keymaps/dana/readme.md b/keyboards/contra/keymaps/dana/readme.md
new file mode 100644
index 00000000..75b4582d
--- /dev/null
+++ b/keyboards/contra/keymaps/dana/readme.md
@@ -0,0 +1,6 @@
+# Dana musical MIDI keyboard layout
+
+Has the contra mapped as a MIDI keyboard, where each row is an octave.
+
+The keyboard has only MIDI, nothing else!
+
diff --git a/keyboards/contra/keymaps/dana/rules.mk b/keyboards/contra/keymaps/dana/rules.mk
new file mode 100644
index 00000000..1198f378
--- /dev/null
+++ b/keyboards/contra/keymaps/dana/rules.mk
@@ -0,0 +1,25 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = yes            # MIDI controls
+AUDIO_ENABLE = no            # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/contra/readme.md b/keyboards/contra/readme.md
new file mode 100644
index 00000000..a8322850
--- /dev/null
+++ b/keyboards/contra/readme.md
@@ -0,0 +1,16 @@
+CONTRA
+===
+
+![CONTRA](https://cartel.ltd/wp-content/uploads/2018/01/img_3209.jpg)
+
+A 40% keyboard by
+
+Keyboard Maintainer: The QMK Community  
+Hardware Supported: CONTRA  
+Hardware Availability: [CARTEL](https://cartel.ltd/projects/contra/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make contra:dana
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
diff --git a/keyboards/contra/rules.mk b/keyboards/contra/rules.mk
new file mode 100755
index 00000000..ca2945e6
--- /dev/null
+++ b/keyboards/contra/rules.mk
@@ -0,0 +1,58 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6