From f837406ace5a3072e98f0bd0e3f4c84704762195 Mon Sep 17 00:00:00 2001 From: Priyadi Iman Nurcahyo Date: Sat, 26 Nov 2016 14:23:55 +0700 Subject: [PATCH] A few addition to PS2 documentation. --- readme.md | 160 ++++++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 125 insertions(+), 35 deletions(-) diff --git a/readme.md b/readme.md index 0157b907..3eb67882 100644 --- a/readme.md +++ b/readme.md @@ -1160,41 +1160,131 @@ Please note the USB port can only supply a limited amount of power to the keyboa ## PS/2 Mouse Support Its possible to hook up a PS/2 mouse (for example touchpads or trackpoints) to your keyboard as a composite device. -In order to do this you must first enable the option in your Makefile. - - PS2_MOUSE_ENABLE = yes - -Then, decide whether to use interrupts (better if your microcontroller supports them) or busywait, and enable the relevant option. - - PS2_USE_INT = yes - // PS2_USE_BUSYWAIT = yes - -If you're using a teensy and have hooked up the clock on your PS/2 device to D1 and the data to D0, you're all set. -Otherwise, you will need to update the following defines in your `config.h`: - - #define PS2_CLOCK_PORT PORTD - #define PS2_CLOCK_PIN PIND - #define PS2_CLOCK_DDR DDRD - #define PS2_CLOCK_BIT 1 - - #define PS2_DATA_PORT PORTD - #define PS2_DATA_PIN PIND - #define PS2_DATA_DDR DDRD - #define PS2_DATA_BIT 0 - -And with `PS2_USE_INT` also define these macros: - - #define PS2_INT_INIT() do { \ - EICRA |= ((1<