diff --git a/keyboards/org60/Makefile b/keyboards/org60/Makefile
new file mode 100644
index 00000000..57b2ef62
--- /dev/null
+++ b/keyboards/org60/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif
diff --git a/keyboards/org60/config.h b/keyboards/org60/config.h
new file mode 100644
index 00000000..62b3b69a
--- /dev/null
+++ b/keyboards/org60/config.h
@@ -0,0 +1,82 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    大橘子外设 (Large orange peripherals)
+#define PRODUCT         Org60
+#define DESCRIPTION     Org60 Keyboard PCB by 大橘子外设 (Large orange peripherals)
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
+#define UNUSED_PINS
+
+/* Backlight Setup */
+#define BACKLIGHT_PIN F5
+#define BACKLIGHT_LEVELS 6
+//#define BACKLIGHT_BREATHING
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* RGB Underglow
+ * F6 PIN for Org60 that has pre-soldered WS2812 LEDs
+ */
+#define RGB_DI_PIN F6
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 20     			// Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+  keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#define TAPPING_TERM 200
+
+#endif
diff --git a/keyboards/xd60/keymaps/BASE/keymap.c b/keyboards/org60/keymaps/base/keymap.c
similarity index 100%
rename from keyboards/xd60/keymaps/BASE/keymap.c
rename to keyboards/org60/keymaps/base/keymap.c
diff --git a/keyboards/xd60/keymaps/BASE/readme.md b/keyboards/org60/keymaps/base/readme.md
similarity index 100%
rename from keyboards/xd60/keymaps/BASE/readme.md
rename to keyboards/org60/keymaps/base/readme.md
diff --git a/keyboards/org60/org60.c b/keyboards/org60/org60.c
new file mode 100644
index 00000000..77a5e7c1
--- /dev/null
+++ b/keyboards/org60/org60.c
@@ -0,0 +1,19 @@
+#include "org60.h"
+
+
+extern inline void org60_caps_led_on(void);
+extern inline void org60_bl_led_on(void);
+
+extern inline void org60_caps_led_off(void);
+extern inline void org60_bl_led_off(void);
+
+
+void led_set_kb(uint8_t usb_led) {
+	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+		org60_caps_led_on();
+	} else {
+		org60_caps_led_off();
+	}
+
+	led_set_user(usb_led);
+}
diff --git a/keyboards/org60/org60.h b/keyboards/org60/org60.h
new file mode 100644
index 00000000..7c100434
--- /dev/null
+++ b/keyboards/org60/org60.h
@@ -0,0 +1,37 @@
+#ifndef Org60_H
+#define Org60_H
+
+#include "quantum.h"
+#include "led.h"
+
+/* Org60 LEDs
+ *   GPIO pads
+ *   0 F7 not connected
+ *   1 F6 RGB PWM Underglow
+ *   2 F5 Backlight LED
+ *   3 F4 not connected
+ *   B2 Capslock LED
+ *   B0 not connected
+ */
+inline void org60_caps_led_on(void)    { DDRB |=  (1<<2); PORTB &= ~(1<<2); }
+inline void org60_bl_led_on(void)    	{ DDRF |=  (1<<5); PORTF &= ~(1<<5); }
+
+inline void org60_caps_led_off(void)   { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
+inline void org60_bl_led_off(void)   	{ DDRF &= ~(1<<5); PORTF &= ~(1<<5); }
+
+/* Org60 Keymap Definition Macro */
+#define KEYMAP( \
+      K00,  K01,  K02,  K03,  K04,  K05,  K06,  K07,  K08,  K09,  K0A,  K0B,  K0C,  K0D,  K49, \
+      K10,  K11,  K12,  K13,  K14,  K15,  K16,  K17,  K18,  K19,  K1A,  K1B,  K1C,  K1D,       \
+      K20,  K21,  K22,  K23,  K24,  K25,  K26,  K27,  K28,  K29,  K2A,  K2B,  K2C,  K2D,       \
+      K30,  K31,  K32,  K33,  K34,  K35,  K36,  K37,  K38,  K39,  K3A,  K3B,  K47,  K3D,  K3C, \
+      K40,  K41,  K42,              K45,                          K4A,  K4B,  K48,  K4C,  K4D  \
+) { \
+    { K00,  K01,  K02,  K03,  K04,  K05,  K06,  K07,  K08,  K09,  K0A,  K0B,  K0C,  K0D }, \
+    { K10,  K11,  K12,  K13,  K14,  K15,  K16,  K17,  K18,  K19,  K1A,  K1B,  K1C,  K1D }, \
+    { K20,  K21,  K22,  K23,  K24,  K25,  K26,  K27,  K28,  K29,  K2A,  K2B,  K2C,  K2D }, \
+    { K30,  K31,  K32,  K33,  K34,  K35,  K36,  K37,  K38,  K39,  K3A,  K3B,  K3C,  K3D }, \
+    { K40,  K41,  K42,  KC_NO,KC_NO,K45,  KC_NO,K47,  K48,  K49,  K4A,  K4B,  K4C,  K4D }  \
+}
+
+#endif
diff --git a/keyboards/org60/readme.md b/keyboards/org60/readme.md
new file mode 100644
index 00000000..8e02a402
--- /dev/null
+++ b/keyboards/org60/readme.md
@@ -0,0 +1,21 @@
+# QMK Firmware for 大橘子外设 (Large Orange Peripheral)'s 60% Org60 PCB
+
+![Top View of a pair of XD60 Keyboards (same layout as Org60)](https://i.imgur.com/3Jq2743.jpg)
+
+
+## Quantum MK Firmware
+For the full Quantum feature list, see [the parent readme.md](/readme.md).
+
+
+## Additional Notes
+The Org60 seems to be a variant of the XD60 (which is essentially a GH60 rev. C, with support for a right-hand arrow cluster), which has USB-C and built-in RGB underlighting.
+
+Compatibility with GH60 expansion boards is unknown.
+
+Board also supports in-switch LEDs (two-pin, single colour), as well as WS2182 LED strips for underglow lighting.
+
+Default keymap included, matching configuration on sale page.
+
+
+## Build
+To build the default keymap, simply run `make org60-default`.
\ No newline at end of file
diff --git a/keyboards/org60/rules.mk b/keyboards/org60/rules.mk
new file mode 100644
index 00000000..566ac0cb
--- /dev/null
+++ b/keyboards/org60/rules.mk
@@ -0,0 +1,64 @@
+# MCU name
+MCU = atmega32u4
+
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+# LUFA specific
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+AUDIO_ENABLE = no           # Audio output on port C6
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+CONSOLE_ENABLE = no         # Console for debug(+400)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+MIDI_ENABLE = no            # MIDI controls
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+UNICODE_ENABLE = no         # Unicode
diff --git a/keyboards/xd60/keymaps/base/keymap.c b/keyboards/xd60/keymaps/base/keymap.c
deleted file mode 100644
index b3ccd5e5..00000000
--- a/keyboards/xd60/keymaps/base/keymap.c
+++ /dev/null
@@ -1,46 +0,0 @@
-#include "xd60.h"
-#include "action_layer.h"
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-  // 0: Base Layer
-  KEYMAP(
-      KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC  ,  KC_NO,    \
-      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC,           KC_BSLS,   \
-      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_NO,             KC_ENT,    \
-      KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_NO,  KC_RSFT  ,KC_UP,    KC_DEL,      \
-      KC_LCTL, KC_LGUI, KC_LALT,                          KC_SPC,                          KC_RGUI, F(0),     KC_LEFT, KC_DOWN,  KC_RIGHT),
-
-  // 1: Function Layer
-  KEYMAP(
-      RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,   KC_F10,  KC_F11,   KC_F12,  KC_NO,   KC_NO,    \
-      KC_NO,   KC_WH_U, KC_UP,   KC_WH_D, KC_BSPC,KC_HOME,KC_CALC,KC_NO,  KC_INS, KC_NO,   KC_PSCR, KC_SLCK,  KC_PAUS,           KC_DEL,    \
-      KC_NO,   KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL, KC_END, KC_PGDN,KC_NO,  KC_NO,  KC_NO,   KC_HOME, KC_PGUP,  KC_NO,             KC_ENT,    \
-      KC_LSFT, KC_NO,   KC_NO,   KC_APP,  BL_STEP,KC_NO,  KC_NO,  KC_VOLD,KC_VOLU,KC_MUTE, KC_END,  KC_RSFT,  KC_NO  ,KC_PGUP,  KC_INS,      \
-      KC_LCTL, KC_LGUI, KC_LALT,                          KC_SPC,                          KC_RGUI, F(0),     KC_HOME, KC_PGDOWN,KC_END),
-
-};
-
-// Custom Actions
-const uint16_t PROGMEM fn_actions[] = {
-    [0] = ACTION_LAYER_MOMENTARY(1),  // to Fn overlay
-};
-
-// Macros
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
-
-  // MACRODOWN only works in this function
-  switch(id) {
-    case 0:
-      if (record->event.pressed) { register_code(KC_RSFT); }
-      else { unregister_code(KC_RSFT); }
-      break;
-  }
-
-  return MACRO_NONE;
-};
-
-// Loop
-void matrix_scan_user(void) {
-  // Empty
-};
diff --git a/keyboards/xd60/keymaps/base/readme.md b/keyboards/xd60/keymaps/base/readme.md
deleted file mode 100644
index 89f9acaa..00000000
--- a/keyboards/xd60/keymaps/base/readme.md
+++ /dev/null
@@ -1,5 +0,0 @@
-![Uses this layout](https://i.redd.it/v64eqwsrk8jx.jpg)
-
-All of the keys which CAN have a function should be assigned one.
-
-The keys with KC_NO cannot be assigned a value