diff --git a/bootloader.mk b/bootloader.mk
new file mode 100644
index 00000000..55352f3d
--- /dev/null
+++ b/bootloader.mk
@@ -0,0 +1,62 @@
+# Copyright 2017 Jack Humbert
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see .
+
+# If it's possible that multiple bootloaders can be used for one project,
+# you can leave this unset, and the correct size will be selected
+# automatically.
+#
+# Sets the bootloader defined in the keyboard's/keymap's rules.mk
+# Current options:
+# atmel-dfu
+# lufa-dfu
+# qmk-dfu
+# halfkay
+# caterina
+# bootloadHID
+#
+# BOOTLOADER_SIZE can still be defined manually, but it's recommended
+# you add any possible configuration to this list
+
+ifeq ($(strip $(BOOTLOADER)), atmel-dfu)
+ OPT_DEFS += -DBOOTLOADER_ATMEL_DFU
+ OPT_DEFS += -DBOOTLOADER_DFU
+ BOOTLOADER_SIZE = 4096
+endif
+ifeq ($(strip $(BOOTLOADER)), lufa-dfu)
+ OPT_DEFS += -DBOOTLOADER_LUFA_DFU
+ OPT_DEFS += -DBOOTLOADER_DFU
+ BOOTLOADER_SIZE = 4096
+endif
+ifeq ($(strip $(BOOTLOADER)), qmk-dfu)
+ OPT_DEFS += -DBOOTLOADER_QMK_DFU
+ OPT_DEFS += -DBOOTLOADER_DFU
+ BOOTLOADER_SIZE = 4096
+endif
+ifeq ($(strip $(BOOTLOADER)), halfkay)
+ OPT_DEFS += -DBOOTLOADER_HALFKAY
+ BOOTLOADER_SIZE = 512
+endif
+ifeq ($(strip $(BOOTLOADER)), caterina)
+ OPT_DEFS += -DBOOTLOADER_CATERINA
+ BOOTLOADER_SIZE = 4096
+endif
+ifeq ($(strip $(BOOTLOADER)), bootloadHID)
+ OPT_DEFS += -DBOOTLOADER_BOOTLOADHID
+ BOOTLOADER_SIZE = 4096
+endif
+
+ifdef BOOTLOADER_SIZE
+ OPT_DEFS += -DBOOTLOADER_SIZE=$(strip $(BOOTLOADER_SIZE))
+endif
\ No newline at end of file
diff --git a/build_keyboard.mk b/build_keyboard.mk
index df025714..cbdaaa01 100644
--- a/build_keyboard.mk
+++ b/build_keyboard.mk
@@ -230,6 +230,7 @@ VPATH += $(USER_PATH)
include common_features.mk
include $(TMK_PATH)/protocol.mk
include $(TMK_PATH)/common.mk
+include bootloader.mk
SRC += $(TMK_COMMON_SRC)
OPT_DEFS += $(TMK_COMMON_DEFS)
@@ -266,10 +267,10 @@ $(KEYBOARD_OUTPUT)_INC := $(PROJECT_INC) $(GFXINC)
$(KEYBOARD_OUTPUT)_CONFIG := $(PROJECT_CONFIG)
# Default target.
-all: build sizeafter
+all: build check-size
# Change the build target to build a HEX file or a library.
-build: elf hex
+build: elf cphex
#build: elf hex eep lss sym
#build: lib
diff --git a/docs/flashing.md b/docs/flashing.md
index a61634d2..5b3c1a44 100644
--- a/docs/flashing.md
+++ b/docs/flashing.md
@@ -1,12 +1,20 @@
-# Flashing Intrustructions
+# Flashing Intrustructions / Bootloader Information
There are quite a few different types of bootloaders that keyboards use, and just about all of the use a different flashing method. Luckily, projects like the [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) aim to be compatible with all the different types without having to think about it much, but this article will describe the different types of bootloaders, and available methods for flashing them.
+If you have a bootloader selected with the `BOOTLOADER` variable in your `rules.mk`, QMK will automatically calculate if your .hex file is the right size to be flashed to the device, and output the total size it bytes (along with the max). To run this process manually, compile with the target `check-size`, eg `make planck/rev4:default:check-size`.
+
## DFU
Atmel's DFU bootloader comes on all atmega32u4 chips by default, and is used by many keyboards that have their own ICs on their PCBs (Older OLKB boards, Clueboards). Some keyboards may also use LUFA's DFU bootloader (or QMK's fork) (Newer OLKB boards) that adds in additional features specific to that hardware.
-These bootloaders are usually 4096 bytes for the atmega32u4 chip.
+To ensure compatability with the DFU bootloader, make sure this block is present your `rules.mk` (optionally with `lufa-dfu` or `qmk-dfu` instead):
+
+ # Bootloader
+ # This definition is optional, and if your keyboard supports multiple bootloaders of
+ # different sizes, comment this out, and the correct address will be loaded
+ # automatically (+60). See bootloader.mk for all options.
+ BOOTLOADER = atmel-dfu
Compatible flashers:
@@ -26,15 +34,32 @@ or:
make ::dfu
+### QMK DFU
+
+QMK has a fork of the LUFA DFU bootloader that allows for a simple matrix scan for exiting the bootloader and returning to the application, as well as flashing an LED/making a ticking noise with a speaker when things are happening. To enable these features, use this block in your `config.h` (The key that exits the bootloader needs to be hooked-up to the INPUT and OUTPUT defined here):
+
+ #define QMK_ESC_OUTPUT F1 // usually COL
+ #define QMK_ESC_INPUT D5 // usually ROW
+ #define QMK_LED E6
+ #define QMK_SPEAKER C6
+
+The Manufacturer and Product names are automatically pulled from your `config.h`, and "Bootloader" is added to the product.
+
+To generate this bootloader, use the `bootloader` target, eg `make planck/rev4:default:bootloader`.
+
+To generate a production-ready .hex file (containing the application and the bootloader), use the `production` target, eg `make planck/rev4:default:production`.
+
## Caterina
Arduino boards and their clones use the [Caterina bootloader](https://github.com/arduino/Arduino/tree/master/hardware/arduino/avr/bootloaders/caterina) (any keyboard built with a Pro Micro, or clone), and uses the avr109 protocol to communicate through virtual serial. Bootloaders like [A-Star](https://www.pololu.com/docs/0J61/9) are based on Caterina.
-This block of code allows for Caterina compatibility in QMK:
+To ensure compatability with the Caterina bootloader, make sure this block is present your `rules.mk`:
- #define CATERINA_BOOTLOADER
-
-These bootloaders are usually 4096 bytes for the atmega32u4 chip.
+ # Bootloader
+ # This definition is optional, and if your keyboard supports multiple bootloaders of
+ # different sizes, comment this out, and the correct address will be loaded
+ # automatically (+60). See bootloader.mk for all options.
+ BOOTLOADER = caterina
Compatible flashers:
@@ -57,7 +82,13 @@ or
Halfkay is a super-slim protocol developed by PJRC that uses HID, and come on all Teensys (namely the 2.0).
-This bootloader is 512 bytes.
+To ensure compatability with the Halfkay bootloader, make sure this block is present your `rules.mk`:
+
+ # Bootloader
+ # This definition is optional, and if your keyboard supports multiple bootloaders of
+ # different sizes, comment this out, and the correct address will be loaded
+ # automatically (+60). See bootloader.mk for all options.
+ BOOTLOADER = halfkay
Compatible flashers:
diff --git a/keyboards/atreus/rules.mk b/keyboards/atreus/rules.mk
index 0a254d0e..2c8418be 100644
--- a/keyboards/atreus/rules.mk
+++ b/keyboards/atreus/rules.mk
@@ -5,7 +5,6 @@ ifdef TEENSY2
ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
else
OPT_DEFS += -DATREUS_ASTAR
- OPT_DEFS += -DCATERINA_BOOTLOADER
ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
endif
@@ -27,7 +26,6 @@ MCU = atmega32u4
# software delays.
F_CPU = 16000000
-
#
# LUFA specific
#
@@ -47,19 +45,20 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+ifdef TEENSY2
+ BOOTLOADER = halfkay
+else
+ BOOTLOADER = caterina
+endif
+
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
# Build Options
# comment out to disable the options.
#
diff --git a/keyboards/atreus62/config.h b/keyboards/atreus62/config.h
index 90a4aa05..8d924894 100644
--- a/keyboards/atreus62/config.h
+++ b/keyboards/atreus62/config.h
@@ -38,8 +38,6 @@ along with this program. If not, see .
#define MATRIX_ROW_PINS { D2, D3, D1, D0, D4 }
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, B5, B4, E6, D7, C6 }
-#define CATERINA_BOOTLOADER
-
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION ROW2COL
diff --git a/keyboards/atreus62/rules.mk b/keyboards/atreus62/rules.mk
index ca399e9c..66f6660c 100644
--- a/keyboards/atreus62/rules.mk
+++ b/keyboards/atreus62/rules.mk
@@ -35,18 +35,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
diff --git a/keyboards/bfake/config.h b/keyboards/bfake/config.h
index c52d9175..c0e0face 100644
--- a/keyboards/bfake/config.h
+++ b/keyboards/bfake/config.h
@@ -41,7 +41,6 @@ along with this program. If not, see .
#define RGBLIGHT_ANIMATIONS
#define NO_UART 1
-#define BOOTLOADHID_BOOTLOADER 1
/* key combination for command */
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
diff --git a/keyboards/bfake/rules.mk b/keyboards/bfake/rules.mk
index d0898582..9165de42 100644
--- a/keyboards/bfake/rules.mk
+++ b/keyboards/bfake/rules.mk
@@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes
# processor frequency
F_CPU = 12000000
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = bootloadHID
+
# build options
BOOTMAGIC_ENABLE = yes
MOUSEKEY_ENABLE = yes
@@ -35,7 +41,6 @@ RGBLIGHT_ENABLE = yes
RGBLIGHT_CUSTOM_DRIVER = yes
OPT_DEFS = -DDEBUG_LEVEL=0
-OPT_DEFS += -DBOOTLOADER_SIZE=2048
# custom matrix setup
CUSTOM_MATRIX = yes
diff --git a/keyboards/bmini/config.h b/keyboards/bmini/config.h
index 90b315b7..b7a25e05 100644
--- a/keyboards/bmini/config.h
+++ b/keyboards/bmini/config.h
@@ -34,7 +34,6 @@ along with this program. If not, see .
#define RGBLIGHT_ANIMATIONS
#define NO_UART 1
-#define BOOTLOADHID_BOOTLOADER 1
/* key combination for command */
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
diff --git a/keyboards/bmini/rules.mk b/keyboards/bmini/rules.mk
index 41a87973..73c361e2 100644
--- a/keyboards/bmini/rules.mk
+++ b/keyboards/bmini/rules.mk
@@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes
# processor frequency
F_CPU = 12000000
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = bootloadHID
+
# build options
BOOTMAGIC_ENABLE = yes
MOUSEKEY_ENABLE = yes
@@ -35,7 +41,6 @@ RGBLIGHT_ENABLE = yes
RGBLIGHT_CUSTOM_DRIVER = yes
OPT_DEFS = -DDEBUG_LEVEL=0
-OPT_DEFS += -DBOOTLOADER_SIZE=2048
# custom matrix setup
CUSTOM_MATRIX = yes
diff --git a/keyboards/chimera_ortho/rules.mk b/keyboards/chimera_ortho/rules.mk
index 098bf28f..4f95949f 100644
--- a/keyboards/chimera_ortho/rules.mk
+++ b/keyboards/chimera_ortho/rules.mk
@@ -1,6 +1,5 @@
OPT_DEFS += -DCHIMERA_ORTHO_PROMICRO
-OPT_DEFS += -DCATERINA_BOOTLOADER
CHIMERA_ORTHO_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
@@ -45,19 +44,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
# Build Options
# comment out to disable the options.
#
diff --git a/keyboards/converter/usb_usb/ble/rules.mk b/keyboards/converter/usb_usb/ble/rules.mk
index c951780e..16090962 100644
--- a/keyboards/converter/usb_usb/ble/rules.mk
+++ b/keyboards/converter/usb_usb/ble/rules.mk
@@ -1,4 +1,3 @@
BLUETOOTH = AdafruitBLE
ADAFRUIT_BLE_ENABLE = yes
-OPT_DEFS += -DCATERINA_BOOTLOADER
F_CPU = 8000000
diff --git a/keyboards/converter/usb_usb/rules.mk b/keyboards/converter/usb_usb/rules.mk
index b0e07c76..7a8f24bb 100644
--- a/keyboards/converter/usb_usb/rules.mk
+++ b/keyboards/converter/usb_usb/rules.mk
@@ -43,19 +43,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
# Interrupt driven control endpoint task
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
# Build Options
# comment out to disable the options.
#
diff --git a/keyboards/deltasplit75/rules.mk b/keyboards/deltasplit75/rules.mk
index e345d61f..2a13dbdf 100644
--- a/keyboards/deltasplit75/rules.mk
+++ b/keyboards/deltasplit75/rules.mk
@@ -39,18 +39,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
diff --git a/keyboards/deltasplit75/v2/config.h b/keyboards/deltasplit75/v2/config.h
index b677d09a..319a149f 100644
--- a/keyboards/deltasplit75/v2/config.h
+++ b/keyboards/deltasplit75/v2/config.h
@@ -37,8 +37,6 @@ along with this program. If not, see .
#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2 }
#define MATRIX_COL_PINS { B6, B5, B4, E6, D7, C6, D4, D1}
-#define CATERINA_BOOTLOADER
-
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/dichotemy/rules.mk b/keyboards/dichotemy/rules.mk
index c8a316f8..4e9db868 100644
--- a/keyboards/dichotemy/rules.mk
+++ b/keyboards/dichotemy/rules.mk
@@ -1,6 +1,5 @@
OPT_DEFS += -DDICHOTEMY_PROMICRO
-OPT_DEFS += -DCATERINA_BOOTLOADER
DICHOTEMY_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
@@ -25,8 +24,6 @@ MCU = atmega32u4
# software delays.
F_CPU = 16000000
-
-#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
@@ -45,19 +42,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
# Build Options
# comment out to disable the options.
#
diff --git a/keyboards/eco/config.h b/keyboards/eco/config.h
index 99b05749..f6b78631 100644
--- a/keyboards/eco/config.h
+++ b/keyboards/eco/config.h
@@ -31,8 +31,6 @@ along with this program. If not, see .
#define MATRIX_ROWS 4
#define MATRIX_COLS 14
-#define CATERINA_BOOTLOADER
-
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/eco/rules.mk b/keyboards/eco/rules.mk
index 6f4b4fef..35ee906b 100644
--- a/keyboards/eco/rules.mk
+++ b/keyboards/eco/rules.mk
@@ -34,18 +34,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
diff --git a/keyboards/ergodox_ez/rules.mk b/keyboards/ergodox_ez/rules.mk
index 3d6b18fe..4d2c4610 100644
--- a/keyboards/ergodox_ez/rules.mk
+++ b/keyboards/ergodox_ez/rules.mk
@@ -54,18 +54,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = halfkay
+
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=512
-
# If you have Left LEDs (see
# https://geekhack.org/index.php?topic=22780.msg873819#msg873819 for
# details), include the following define:
diff --git a/keyboards/gherkin/keymaps/mjt/config.h b/keyboards/gherkin/keymaps/mjt/config.h
index 9c9f0383..bb59ec21 100644
--- a/keyboards/gherkin/keymaps/mjt/config.h
+++ b/keyboards/gherkin/keymaps/mjt/config.h
@@ -52,8 +52,6 @@ along with this program. If not, see .
#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 }
#define MATRIX_COL_PINS { B4, E6, D7, F6, D4, D0 }
-#define CATERINA_BOOTLOADER
-
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
diff --git a/keyboards/gherkin/rules.mk b/keyboards/gherkin/rules.mk
index 6bb9edb3..530898bd 100644
--- a/keyboards/gherkin/rules.mk
+++ b/keyboards/gherkin/rules.mk
@@ -33,14 +33,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section Size in *bytes*
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
# Build Options
# comment out to disable the options.
#
diff --git a/keyboards/handwired/MS_sculpt_mobile/rules.mk b/keyboards/handwired/MS_sculpt_mobile/rules.mk
index 53769f81..680c057d 100644
--- a/keyboards/handwired/MS_sculpt_mobile/rules.mk
+++ b/keyboards/handwired/MS_sculpt_mobile/rules.mk
@@ -5,21 +5,29 @@ SRC= babblePaste.c
ifdef ASTAR
CFLAGS=-D ASTAR
- OPT_DEFS += -DBOOTLOADER_SIZE=4096
MCU = atmega32u4
- OPT_DEFS += -DCATERINA_BOOTLOADER
SCULPT_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done ; \
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
else
MCU = at90usb1286
- OPT_DEFS += -DBOOTLOADER_SIZE=2048
SCULPT_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
endif
F_CPU = 16000000
ARCH = AVR8
F_USB = $(F_CPU)
+
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+ifdef ASTAR
+ BOOTLOADER = caterina
+else
+ BOOTLOADER = atmel-dfu
+endif
+
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
diff --git a/keyboards/handwired/reddot/rules.mk b/keyboards/handwired/reddot/rules.mk
index 49299684..00ca06dd 100755
--- a/keyboards/handwired/reddot/rules.mk
+++ b/keyboards/handwired/reddot/rules.mk
@@ -36,30 +36,25 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
-
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
ifdef TEENSY2
+ BOOTLOADER = halfkay
OPT_DEFS += -DATREUS_TEENSY2
ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
else
+ BOOTLOADER = caterina
OPT_DEFS += -DATREUS_ASTAR
- OPT_DEFS += -DCATERINA_BOOTLOADER
ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
endif
+
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-# MCU name
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
# Build Options
# change yes to no to disable
diff --git a/keyboards/handwired/space_oddity/config.h b/keyboards/handwired/space_oddity/config.h
index 88cc5ad0..9c9361ce 100644
--- a/keyboards/handwired/space_oddity/config.h
+++ b/keyboards/handwired/space_oddity/config.h
@@ -11,8 +11,6 @@
#define PRODUCT Space Odyssey
#define DESCRIPTION Keyboard
-#define CATERINA_BOOTLOADER
-
#define MOUSEKEY_INTERVAL 16
#define MOUSEKEY_DELAY 0
#define MOUSEKEY_TIME_TO_MAX 60
diff --git a/keyboards/handwired/space_oddity/rules.mk b/keyboards/handwired/space_oddity/rules.mk
index 170c64a3..4dc93fad 100644
--- a/keyboards/handwired/space_oddity/rules.mk
+++ b/keyboards/handwired/space_oddity/rules.mk
@@ -33,14 +33,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section Size in *bytes*
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
# Build Options
# comment out to disable the options.
#
diff --git a/keyboards/handwired/traveller/rules.mk b/keyboards/handwired/traveller/rules.mk
index 62f94b94..8568def3 100644
--- a/keyboards/handwired/traveller/rules.mk
+++ b/keyboards/handwired/traveller/rules.mk
@@ -37,15 +37,23 @@ ARCH = AVR8
F_USB = $(F_CPU)
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
ifdef TEENSY2
+ BOOTLOADER = halfkay
OPT_DEFS += -DATREUS_TEENSY2
ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
else
+ BOOTLOADER = caterina
OPT_DEFS += -DATREUS_ASTAR
- OPT_DEFS += -DCATERINA_BOOTLOADER
ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
endif
+
+
+
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
diff --git a/keyboards/handwired/woodpad/config.h b/keyboards/handwired/woodpad/config.h
index 39a46685..b2eb7020 100644
--- a/keyboards/handwired/woodpad/config.h
+++ b/keyboards/handwired/woodpad/config.h
@@ -53,8 +53,6 @@ along with this program. If not, see .
// #define BACKLIGHT_BREATHING
// #define BACKLIGHT_LEVELS 3
-#define CATERINA_BOOTLOADER
-
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
diff --git a/keyboards/handwired/woodpad/rules.mk b/keyboards/handwired/woodpad/rules.mk
index 7612f4b4..11f09658 100644
--- a/keyboards/handwired/woodpad/rules.mk
+++ b/keyboards/handwired/woodpad/rules.mk
@@ -35,19 +35,16 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
# Build Options
# change yes to no to disable
#
diff --git a/keyboards/iris/rev1/config.h b/keyboards/iris/rev1/config.h
index 10f435a4..c9bc6252 100644
--- a/keyboards/iris/rev1/config.h
+++ b/keyboards/iris/rev1/config.h
@@ -37,8 +37,6 @@ along with this program. If not, see .
#define MATRIX_ROW_PINS { D7, E6, B4, B5, D4 }
#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, F4 }
-#define CATERINA_BOOTLOADER
-
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/iris/rev2/config.h b/keyboards/iris/rev2/config.h
index 4ba21a58..290fba45 100644
--- a/keyboards/iris/rev2/config.h
+++ b/keyboards/iris/rev2/config.h
@@ -37,8 +37,6 @@ along with this program. If not, see .
#define MATRIX_ROW_PINS { D7, E6, B4, D2, D4 }
#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 }
-#define CATERINA_BOOTLOADER
-
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/iris/rules.mk b/keyboards/iris/rules.mk
index 0280e9d1..db4bf3a1 100644
--- a/keyboards/iris/rules.mk
+++ b/keyboards/iris/rules.mk
@@ -39,18 +39,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
diff --git a/keyboards/jj40/config.h b/keyboards/jj40/config.h
index 42a37c95..02339a33 100644
--- a/keyboards/jj40/config.h
+++ b/keyboards/jj40/config.h
@@ -38,7 +38,6 @@ along with this program. If not, see .
#define TAPPING_TOGGLE 3
#define NO_UART 1
-#define BOOTLOADHID_BOOTLOADER 1
/* key combination for command */
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
diff --git a/keyboards/jj40/program b/keyboards/jj40/program
deleted file mode 100755
index 81552c27..00000000
--- a/keyboards/jj40/program
+++ /dev/null
@@ -1,74 +0,0 @@
-#!/usr/bin/env python
-# Copyright 2017 Luiz Ribeiro
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see .
-
-from __future__ import print_function
-
-import os
-import sys
-import time
-import usb
-
-if len(sys.argv) < 2:
- print('Usage: %s ' % sys.argv[0])
- sys.exit(1)
-
-print('Searching for jj40... ', end='')
-
-dev = usb.core.find(idVendor=0x20A0, idProduct=0x422D)
-if dev is None:
- raise ValueError('Device not found')
-
-print('Found', end='\n\n')
-
-print('Device Information:')
-print(' idVendor: %d (0x%04x)' % (dev.idVendor, dev.idVendor))
-print(' idProduct: %d (0x%04x)' % (dev.idProduct, dev.idProduct))
-print('Manufacturer: %s' % (dev.iManufacturer))
-print('Serial: %s' % (dev.iSerialNumber))
-print('Product: %s' % (dev.iProduct), end='\n\n')
-
-print('Transferring control to bootloader... ', end='')
-
-dev.set_configuration()
-
-request_type = usb.util.build_request_type(
- usb.util.CTRL_OUT,
- usb.util.CTRL_TYPE_CLASS,
- usb.util.CTRL_RECIPIENT_DEVICE)
-
-USBRQ_HID_SET_REPORT = 0x09
-HID_REPORT_OPTION = 0x0301
-
-
-try:
- dev.ctrl_transfer(
- request_type,
- USBRQ_HID_SET_REPORT,
- HID_REPORT_OPTION,
- 0,
- [0, 0, 0xFF] + [0] * 5
- )
-except usb.core.USBError:
- # for some reason I keep getting USBError, but it works!
- pass
-
-# wait a bit until bootloader starts up
-time.sleep(2)
-
-print('OK')
-print('Programming...')
-if os.system('bootloadHID -r "%s"' % sys.argv[1]) == 0:
- print('\nDone!')
diff --git a/keyboards/jj40/rules.mk b/keyboards/jj40/rules.mk
index c39ebf22..c6279a2a 100644
--- a/keyboards/jj40/rules.mk
+++ b/keyboards/jj40/rules.mk
@@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes
# processor frequency
F_CPU = 12000000
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = bootloadHID
+
# build options
BOOTMAGIC_ENABLE = no
MOUSEKEY_ENABLE = no
@@ -39,11 +45,10 @@ KEY_LOCK_ENABLE = yes
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
OPT_DEFS = -DDEBUG_LEVEL=0
-OPT_DEFS += -DBOOTLOADER_SIZE=2048
# custom matrix setup
CUSTOM_MATRIX = yes
SRC = matrix.c i2c.c
# programming options
-PROGRAM_CMD = ./keyboards/jj40/program $(TARGET).hex
+PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
diff --git a/keyboards/lets_split/rev1/config.h b/keyboards/lets_split/rev1/config.h
index 7c128421..73f90e71 100644
--- a/keyboards/lets_split/rev1/config.h
+++ b/keyboards/lets_split/rev1/config.h
@@ -39,9 +39,6 @@ along with this program. If not, see .
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 }
// #define MATRIX_COL_PINS { B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
-
-#define CATERINA_BOOTLOADER
-
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
diff --git a/keyboards/lets_split/rev2/config.h b/keyboards/lets_split/rev2/config.h
index 1f0603d5..1c48f38e 100644
--- a/keyboards/lets_split/rev2/config.h
+++ b/keyboards/lets_split/rev2/config.h
@@ -39,8 +39,6 @@ along with this program. If not, see .
#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 }
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6 } //uncomment this line and comment line above if you need to reverse left-to-right key order
-#define CATERINA_BOOTLOADER
-
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
diff --git a/keyboards/lets_split/rules.mk b/keyboards/lets_split/rules.mk
index 1bbc0367..f9dc127b 100644
--- a/keyboards/lets_split/rules.mk
+++ b/keyboards/lets_split/rules.mk
@@ -40,18 +40,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
diff --git a/keyboards/lets_split/sockets/config.h b/keyboards/lets_split/sockets/config.h
index 0543e893..70ebcb8c 100644
--- a/keyboards/lets_split/sockets/config.h
+++ b/keyboards/lets_split/sockets/config.h
@@ -39,8 +39,6 @@ along with this program. If not, see .
#define MATRIX_COL_PINS { F4, F7, D7, B3, B2, B6}
// #define MATRIX_COL_PINS { B6, B2, B3, C6, F7, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
-#define CATERINA_BOOTLOADER
-
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
diff --git a/keyboards/levinson/rev1/config.h b/keyboards/levinson/rev1/config.h
index 7c8b9b0b..ddccbc47 100644
--- a/keyboards/levinson/rev1/config.h
+++ b/keyboards/levinson/rev1/config.h
@@ -38,8 +38,6 @@ along with this program. If not, see .
#define MATRIX_ROW_PINS { D7, E6, B4, B5 }
#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, F4 }
-#define CATERINA_BOOTLOADER
-
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
diff --git a/keyboards/levinson/rev2/config.h b/keyboards/levinson/rev2/config.h
index 27d451a3..51ae5cd3 100644
--- a/keyboards/levinson/rev2/config.h
+++ b/keyboards/levinson/rev2/config.h
@@ -38,9 +38,6 @@ along with this program. If not, see .
#define MATRIX_ROW_PINS { D4, D7, E6, B4 }
#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 }
-
-#define CATERINA_BOOTLOADER
-
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
diff --git a/keyboards/levinson/rules.mk b/keyboards/levinson/rules.mk
index 0ca19e9a..8e67497f 100644
--- a/keyboards/levinson/rules.mk
+++ b/keyboards/levinson/rules.mk
@@ -40,18 +40,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
diff --git a/keyboards/mechmini/config.h b/keyboards/mechmini/config.h
index 96f4bb51..e7004608 100644
--- a/keyboards/mechmini/config.h
+++ b/keyboards/mechmini/config.h
@@ -35,7 +35,6 @@ along with this program. If not, see .
#define RGB_DI_PIN E2
#define NO_UART 1
-#define BOOTLOADHID_BOOTLOADER 1
/* key combination for command */
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
diff --git a/keyboards/mechmini/rules.mk b/keyboards/mechmini/rules.mk
index d0898582..ed55ae1c 100644
--- a/keyboards/mechmini/rules.mk
+++ b/keyboards/mechmini/rules.mk
@@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes
# processor frequency
F_CPU = 12000000
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = atmel-dfu
+
# build options
BOOTMAGIC_ENABLE = yes
MOUSEKEY_ENABLE = yes
@@ -35,7 +41,6 @@ RGBLIGHT_ENABLE = yes
RGBLIGHT_CUSTOM_DRIVER = yes
OPT_DEFS = -DDEBUG_LEVEL=0
-OPT_DEFS += -DBOOTLOADER_SIZE=2048
# custom matrix setup
CUSTOM_MATRIX = yes
diff --git a/keyboards/minidox/rev1/config.h b/keyboards/minidox/rev1/config.h
index 9799c419..b7272bdb 100644
--- a/keyboards/minidox/rev1/config.h
+++ b/keyboards/minidox/rev1/config.h
@@ -26,8 +26,6 @@ along with this program. If not, see .
#define MATRIX_ROW_PINS { B2, B6, B4, B5 }
#define MATRIX_COL_PINS { F4, D3, D2, D1, D4 }
-#define CATERINA_BOOTLOADER
-
#define USE_SERIAL
//#define EE_HANDS
diff --git a/keyboards/minidox/rules.mk b/keyboards/minidox/rules.mk
index 0f9d3031..0c3a03bd 100644
--- a/keyboards/minidox/rules.mk
+++ b/keyboards/minidox/rules.mk
@@ -39,18 +39,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
diff --git a/keyboards/mitosis/rules.mk b/keyboards/mitosis/rules.mk
index 903edb10..0db144ed 100644
--- a/keyboards/mitosis/rules.mk
+++ b/keyboards/mitosis/rules.mk
@@ -1,6 +1,5 @@
OPT_DEFS += -DMITOSIS_PROMICRO
-OPT_DEFS += -DCATERINA_BOOTLOADER
MITOSIS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
@@ -25,7 +24,6 @@ MCU = atmega32u4
# software delays.
F_CPU = 16000000
-
#
# LUFA specific
#
@@ -45,19 +43,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
# Build Options
# comment out to disable the options.
#
diff --git a/keyboards/mt40/config.h b/keyboards/mt40/config.h
index 394cc789..6c82b2c7 100644
--- a/keyboards/mt40/config.h
+++ b/keyboards/mt40/config.h
@@ -44,7 +44,6 @@ along with this program. If not, see .
#define RGBLIGHT_VAL_STEP 18
#define NO_UART 1
-#define BOOTLOADHID_BOOTLOADER 1
#define TAPPING_TERM 200
diff --git a/keyboards/mt40/program b/keyboards/mt40/program
deleted file mode 100755
index e8786f56..00000000
--- a/keyboards/mt40/program
+++ /dev/null
@@ -1,74 +0,0 @@
-#!/usr/bin/env python2.7
-# Copyright 2017 Luiz Ribeiro
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see .
-
-from __future__ import print_function
-
-import os
-import sys
-import time
-import usb
-
-if len(sys.argv) < 2:
- print('Usage: %s ' % sys.argv[0])
- sys.exit(1)
-
-print('Searching for planck clone keyboard... ', end='')
-
-dev = usb.core.find(idVendor=0x20A0, idProduct=0x422D)
-if dev is None:
- raise ValueError('Device not found')
-
-print('Found', end='\n\n')
-
-print('Device Information:')
-print(' idVendor: %d (0x%04x)' % (dev.idVendor, dev.idVendor))
-print(' idProduct: %d (0x%04x)' % (dev.idProduct, dev.idProduct))
-print('Manufacturer: %s' % (dev.iManufacturer))
-print('Serial: %s' % (dev.iSerialNumber))
-print('Product: %s' % (dev.iProduct), end='\n\n')
-
-print('Transferring control to bootloader... ', end='')
-
-dev.set_configuration()
-
-request_type = usb.util.build_request_type(
- usb.util.CTRL_OUT,
- usb.util.CTRL_TYPE_CLASS,
- usb.util.CTRL_RECIPIENT_DEVICE)
-
-USBRQ_HID_SET_REPORT = 0x09
-HID_REPORT_OPTION = 0x0301
-
-
-try:
- dev.ctrl_transfer(
- request_type,
- USBRQ_HID_SET_REPORT,
- HID_REPORT_OPTION,
- 0,
- [0, 0, 0xFF] + [0] * 5
- )
-except usb.core.USBError:
- # for some reason I keep getting USBError, but it works!
- pass
-
-# wait a bit until bootloader starts up
-time.sleep(2)
-
-print('OK')
-print('Programming...')
-if os.system('bootloadHID -r "%s"' % sys.argv[1]) == 0:
- print('\nDone!')
diff --git a/keyboards/mt40/rules.mk b/keyboards/mt40/rules.mk
index 10023da0..9d230d23 100644
--- a/keyboards/mt40/rules.mk
+++ b/keyboards/mt40/rules.mk
@@ -9,6 +9,12 @@ NO_SUSPEND_POWER_DOWN = yes
# processor frequency
F_CPU = 12000000
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = bootloadHID
+
# build options
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
@@ -26,11 +32,10 @@ RGBLIGHT_CUSTOM_DRIVER = yes
TAP_DANCE_ENABLE = no
OPT_DEFS = -DDEBUG_LEVEL=0
-OPT_DEFS += -DBOOTLOADER_SIZE=2048
# custom matrix setup
CUSTOM_MATRIX = yes
SRC = matrix.c i2c.c
# programming options
-PROGRAM_CMD = ./keyboards/mt40/program $(TARGET).hex
+PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
diff --git a/keyboards/nyquist/rev1/config.h b/keyboards/nyquist/rev1/config.h
index 36157688..4430f254 100644
--- a/keyboards/nyquist/rev1/config.h
+++ b/keyboards/nyquist/rev1/config.h
@@ -37,8 +37,6 @@ along with this program. If not, see .
#define MATRIX_ROW_PINS { D4, D7, E6, B4, B5 }
#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 }
-#define CATERINA_BOOTLOADER
-
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/nyquist/rules.mk b/keyboards/nyquist/rules.mk
index f2bc59cc..971cd188 100644
--- a/keyboards/nyquist/rules.mk
+++ b/keyboards/nyquist/rules.mk
@@ -39,18 +39,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
diff --git a/keyboards/orthodox/rev1/config.h b/keyboards/orthodox/rev1/config.h
index 26715f40..d6564f28 100644
--- a/keyboards/orthodox/rev1/config.h
+++ b/keyboards/orthodox/rev1/config.h
@@ -51,8 +51,6 @@ along with this program. If not, see .
#define MATRIX_COL_PINS { D2, F5, F6, F7, B6, B5, B4, D7, D6 }
/*/
-#define CATERINA_BOOTLOADER
-
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/orthodox/rules.mk b/keyboards/orthodox/rules.mk
index 48d6551b..d7ea0d49 100644
--- a/keyboards/orthodox/rules.mk
+++ b/keyboards/orthodox/rules.mk
@@ -39,18 +39,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
diff --git a/keyboards/pearl/config.h b/keyboards/pearl/config.h
index 99a93ee7..47a732f7 100644
--- a/keyboards/pearl/config.h
+++ b/keyboards/pearl/config.h
@@ -27,7 +27,6 @@ along with this program. If not, see .
#define DESCRIPTION 40% keyboard
#define NO_UART 1
-#define BOOTLOADHID_BOOTLOADER 1
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 12
diff --git a/keyboards/pearl/rules.mk b/keyboards/pearl/rules.mk
index d0898582..9165de42 100644
--- a/keyboards/pearl/rules.mk
+++ b/keyboards/pearl/rules.mk
@@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes
# processor frequency
F_CPU = 12000000
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = bootloadHID
+
# build options
BOOTMAGIC_ENABLE = yes
MOUSEKEY_ENABLE = yes
@@ -35,7 +41,6 @@ RGBLIGHT_ENABLE = yes
RGBLIGHT_CUSTOM_DRIVER = yes
OPT_DEFS = -DDEBUG_LEVEL=0
-OPT_DEFS += -DBOOTLOADER_SIZE=2048
# custom matrix setup
CUSTOM_MATRIX = yes
diff --git a/keyboards/planck/light/rules.mk b/keyboards/planck/light/rules.mk
index 02c39c43..1225a5d2 100644
--- a/keyboards/planck/light/rules.mk
+++ b/keyboards/planck/light/rules.mk
@@ -4,6 +4,4 @@ MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
-OPT_DEFS += -DBOOTLOADER_SIZE=8192
-
MCU = at90usb1286
\ No newline at end of file
diff --git a/keyboards/planck/rev3/rules.mk b/keyboards/planck/rev3/rules.mk
index 9ecde595..e51af55c 100644
--- a/keyboards/planck/rev3/rules.mk
+++ b/keyboards/planck/rev3/rules.mk
@@ -1,10 +1 @@
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
AUDIO_ENABLE = no # Audio output on port C6
diff --git a/keyboards/planck/rev4/rules.mk b/keyboards/planck/rev4/rules.mk
index 0001fb50..7e64e7ed 100644
--- a/keyboards/planck/rev4/rules.mk
+++ b/keyboards/planck/rev4/rules.mk
@@ -1,9 +1 @@
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
AUDIO_ENABLE = yes # Audio output on port C6
diff --git a/keyboards/planck/rev5/rules.mk b/keyboards/planck/rev5/rules.mk
index 29eae4b4..3b22e0a0 100644
--- a/keyboards/planck/rev5/rules.mk
+++ b/keyboards/planck/rev5/rules.mk
@@ -1,9 +1 @@
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
AUDIO_ENABLE = yes # Audio output on port C6
\ No newline at end of file
diff --git a/keyboards/planck/rules.mk b/keyboards/planck/rules.mk
index 1fed5fa5..439f7db6 100644
--- a/keyboards/planck/rules.mk
+++ b/keyboards/planck/rules.mk
@@ -34,6 +34,23 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+ifeq ($(strip $(KEYBOARD)), planck/rev3)
+ BOOTLOADER = atmel-dfu
+endif
+ifeq ($(strip $(KEYBOARD)), planck/rev4)
+ BOOTLOADER = atmel-dfu
+endif
+ifeq ($(strip $(KEYBOARD)), planck/rev5)
+ BOOTLOADER = qmk-dfu
+endif
+ifeq ($(strip $(KEYBOARD)), planck/light)
+ BOOTLOADER = qmk-dfu
+endif
+
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
@@ -46,9 +63,9 @@ MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
+MIDI_ENABLE = yes # MIDI controls
AUDIO_ENABLE = yes # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
diff --git a/keyboards/preonic/rules.mk b/keyboards/preonic/rules.mk
index acef4d97..60087e97 100644
--- a/keyboards/preonic/rules.mk
+++ b/keyboards/preonic/rules.mk
@@ -36,18 +36,20 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+ifeq ($(strip $(KEYBOARD)), preonic/rev1)
+ BOOTLOADER = atmel-dfu
+endif
+ifeq ($(strip $(KEYBOARD)), preonic/rev2)
+ BOOTLOADER = qmk-dfu
+endif
+
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
diff --git a/keyboards/ps2avrGB/config.h b/keyboards/ps2avrGB/config.h
index 57ec9851..f62de165 100644
--- a/keyboards/ps2avrGB/config.h
+++ b/keyboards/ps2avrGB/config.h
@@ -27,7 +27,6 @@ along with this program. If not, see .
#define RGBLIGHT_ANIMATIONS
#define NO_UART 1
-#define BOOTLOADHID_BOOTLOADER 1
/* key combination for command */
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
diff --git a/keyboards/ps2avrGB/rules.mk b/keyboards/ps2avrGB/rules.mk
index 9e76993c..c7c12dcf 100644
--- a/keyboards/ps2avrGB/rules.mk
+++ b/keyboards/ps2avrGB/rules.mk
@@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes
# processor frequency
F_CPU = 12000000
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = atmel-dfu
+
# build options
BOOTMAGIC_ENABLE = yes
MOUSEKEY_ENABLE = yes
@@ -35,7 +41,6 @@ RGBLIGHT_ENABLE = yes
RGBLIGHT_CUSTOM_DRIVER = yes
OPT_DEFS = -DDEBUG_LEVEL=0
-OPT_DEFS += -DBOOTLOADER_SIZE=2048
# custom matrix setup
CUSTOM_MATRIX = yes
diff --git a/keyboards/viterbi/rev1/config.h b/keyboards/viterbi/rev1/config.h
index 68ca5f36..3400ea31 100644
--- a/keyboards/viterbi/rev1/config.h
+++ b/keyboards/viterbi/rev1/config.h
@@ -37,8 +37,6 @@ along with this program. If not, see .
#define MATRIX_ROW_PINS { D4, D7, E6, B4, B5 }
#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
-#define CATERINA_BOOTLOADER
-
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/viterbi/rules.mk b/keyboards/viterbi/rules.mk
index 8a1b9401..1f77c637 100644
--- a/keyboards/viterbi/rules.mk
+++ b/keyboards/viterbi/rules.mk
@@ -39,18 +39,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
diff --git a/keyboards/ymd96/config.h b/keyboards/ymd96/config.h
index cdc403d5..e0a2aa13 100644
--- a/keyboards/ymd96/config.h
+++ b/keyboards/ymd96/config.h
@@ -35,7 +35,6 @@ along with this program. If not, see .
#define RGBLIGHT_ANIMATIONS
#define NO_UART 1
-#define BOOTLOADHID_BOOTLOADER 1
/* key combination for command */
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
diff --git a/keyboards/ymd96/rules.mk b/keyboards/ymd96/rules.mk
index 9e76993c..c7c12dcf 100644
--- a/keyboards/ymd96/rules.mk
+++ b/keyboards/ymd96/rules.mk
@@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes
# processor frequency
F_CPU = 12000000
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = atmel-dfu
+
# build options
BOOTMAGIC_ENABLE = yes
MOUSEKEY_ENABLE = yes
@@ -35,7 +41,6 @@ RGBLIGHT_ENABLE = yes
RGBLIGHT_CUSTOM_DRIVER = yes
OPT_DEFS = -DDEBUG_LEVEL=0
-OPT_DEFS += -DBOOTLOADER_SIZE=2048
# custom matrix setup
CUSTOM_MATRIX = yes
diff --git a/layouts/community/ergodox/jackhumbert/keymap.c b/layouts/community/ergodox/jackhumbert/keymap.c
index 6a00ffa2..634e4a0c 100644
--- a/layouts/community/ergodox/jackhumbert/keymap.c
+++ b/layouts/community/ergodox/jackhumbert/keymap.c
@@ -19,7 +19,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_HOME,
KC_SPC,KC_SPC,KC_END,
// right hand
- KC_NO, M(1), KC_7, KC_8, KC_9, KC_0, KC_NO,
+ KC_NO, M(1), RESET, KC_8, KC_9, KC_0, KC_NO,
KC_NO, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, KC_P, KC_BSPC,
RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_SCLN, KC_QUOT,
KC_NO, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_ENT,
diff --git a/message.mk b/message.mk
index 0548fe17..7c832b29 100644
--- a/message.mk
+++ b/message.mk
@@ -43,9 +43,9 @@ MSG_SIZE_BEFORE = Size before:
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
-MSG_FLASH = Creating load file for Flash:
+MSG_FLASH = Creating load file for flashing:
MSG_EEPROM = Creating load file for EEPROM:
-MSG_BIN = Creating binary load file for Flash:
+MSG_BIN = Creating binary load file for flashing:
MSG_EXTENDED_LISTING = Creating Extended Listing:
MSG_SYMBOL_TABLE = Creating Symbol Table:
MSG_LINKING = Linking:
@@ -76,3 +76,7 @@ define GENERATE_MSG_MAKE_TEST
endef
MSG_MAKE_TEST = $(eval $(call GENERATE_MSG_MAKE_TEST))$(MSG_MAKE_TEST_ACTUAL)
MSG_TEST = Testing $(BOLD)$(TEST_NAME)$(NO_COLOR)
+MSG_CHECK_FILESIZE = Checking file size of $(TARGET).hex
+MSG_FILE_TOO_BIG = $(ERROR_COLOR)Your file is too big!$(NO_COLOR) $(CURRENT_SIZE)/$(MAX_SIZE)\n
+MSG_FILE_TOO_SMALL = Your file is too small! $(CURRENT_SIZE)/$(MAX_SIZE)\n
+MSG_FILE_JUST_RIGHT = File size is fine - $(CURRENT_SIZE)/$(MAX_SIZE)\n
diff --git a/quantum/quantum.c b/quantum/quantum.c
index 09920159..9232cf44 100644
--- a/quantum/quantum.c
+++ b/quantum/quantum.c
@@ -143,7 +143,8 @@ void reset_keyboard(void) {
#else
wait_ms(250);
#endif
-#ifdef CATERINA_BOOTLOADER
+// this is also done later in bootloader.c - not sure if it's neccesary here
+#ifdef BOOTLOADER_CATERINA
*(uint16_t *)0x0800 = 0x7777; // these two are a-star-specific
#endif
bootloader_jump();
diff --git a/tmk_core/avr.mk b/tmk_core/avr.mk
index 94e9a7bd..c083f6b7 100644
--- a/tmk_core/avr.mk
+++ b/tmk_core/avr.mk
@@ -121,22 +121,22 @@ qmk: $(BUILD_DIR)/$(TARGET).hex
printf "@ $(TARGET).json\n@=info.json\n" | zipnote -w $(TARGET).qmk
# Program the device.
-program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
+program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep check-size
$(PROGRAM_CMD)
-teensy: $(BUILD_DIR)/$(TARGET).hex
+teensy: $(BUILD_DIR)/$(TARGET).hex check-size
$(TEENSY_LOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex
BATCHISP ?= batchisp
-flip: $(BUILD_DIR)/$(TARGET).hex
+flip: $(BUILD_DIR)/$(TARGET).hex check-size
$(BATCHISP) -hardware usb -device $(MCU) -operation erase f
$(BATCHISP) -hardware usb -device $(MCU) -operation loadbuffer $(BUILD_DIR)/$(TARGET).hex program
$(BATCHISP) -hardware usb -device $(MCU) -operation start reset 0
DFU_PROGRAMMER ?= dfu-programmer
-dfu: $(BUILD_DIR)/$(TARGET).hex sizeafter
+dfu: $(BUILD_DIR)/$(TARGET).hex check-size
until $(DFU_PROGRAMMER) $(MCU) get bootloader-version; do\
echo "Error: Bootloader not found. Trying again in 5s." ;\
sleep 5 ;\
@@ -168,7 +168,7 @@ dfu-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
fi
$(DFU_PROGRAMMER) $(MCU) reset
-avrdude: $(BUILD_DIR)/$(TARGET).hex
+avrdude: $(BUILD_DIR)/$(TARGET).hex check-size
if grep -q -s Microsoft /proc/version; then \
echo 'ERROR: AVR flashing cannot be automated within the Windows Subsystem for Linux (WSL) currently. Instead, take the .hex file generated and flash it using AVRDUDE, AVRDUDESS, or XLoader.'; \
else \
diff --git a/tmk_core/common/avr/bootloader.c b/tmk_core/common/avr/bootloader.c
index 34db8d0b..ee150817 100644
--- a/tmk_core/common/avr/bootloader.c
+++ b/tmk_core/common/avr/bootloader.c
@@ -6,6 +6,7 @@
#include
#include
#include "bootloader.h"
+#include
#ifdef PROTOCOL_LUFA
#include
@@ -56,14 +57,17 @@
* | Bootloader | 512B | Bootloader | 1KB
* 0x7FFF +---------------+ 0x1FFFF +---------------+
*/
-#ifndef BOOTLOADER_SIZE
-#warning To use bootloader_jump() you need to define BOOTLOADER_SIZE in config.h.
-#define BOOTLOADER_SIZE 4096
-#endif
-#define FLASH_SIZE (FLASHEND + 1L)
-#define BOOTLOADER_START (FLASH_SIZE - BOOTLOADER_SIZE)
+#define FLASH_SIZE (FLASHEND + 1L)
+
+#if !defined(BOOTLOADER_SIZE)
+ uint16_t bootloader_start;
+#endif
+#define BOOT_SIZE_256 0b110
+#define BOOT_SIZE_512 0b100
+#define BOOT_SIZE_1024 0b010
+#define BOOT_SIZE_2048 0b000
/*
* Entering the Bootloader via Software
@@ -74,34 +78,62 @@ uint32_t reset_key __attribute__ ((section (".noinit")));
/* initialize MCU status by watchdog reset */
void bootloader_jump(void) {
- #ifndef CATERINA_BOOTLOADER
-
- #ifdef PROTOCOL_LUFA
- USB_Disable();
- cli();
- _delay_ms(2000);
- #endif
-
- #ifdef PROTOCOL_PJRC
- cli();
- UDCON = 1;
- USBCON = (1<> 1;
+ } else if (high_fuse & BOOT_SIZE_512) {
+ bootloader_start = (FLASH_SIZE - 1024) >> 1;
+ } else if (high_fuse & BOOT_SIZE_1024) {
+ bootloader_start = (FLASH_SIZE - 2048) >> 1;
+ } else {
+ bootloader_start = (FLASH_SIZE - 4096) >> 1;
+ }
+ #endif
- #else
+ // Something like this might work, but it compiled larger than the block above
+ // bootloader_start = FLASH_SIZE - (256 << (~high_fuse & 0b110 >> 1));
+
+
+ #if defined(BOOTLOADER_HALFKAY)
+ // http://www.pjrc.com/teensy/jump_to_bootloader.html
+ cli();
+ // disable watchdog, if enabled (it's not)
+ // disable all peripherals
+ // a shutdown call might make sense here
+ UDCON = 1;
+ USBCON = (1<> 1))();
+ #else
+ asm("ijmp" :: "z" (bootloader_start));
+ #endif
+ }
+ #endif
}
#if 0
-/* Jumping To The Bootloader
- * http://www.pjrc.com/teensy/jump_to_bootloader.html
- *
- * This method doen't work when using LUFA. idk why.
- * - needs to initialize more regisers or interrupt setting?
- */
-void bootloader_jump(void) {
-#ifdef PROTOCOL_LUFA
- USB_Disable();
- cli();
- _delay_ms(2000);
-#endif
-
-#ifdef PROTOCOL_PJRC
- cli();
- UDCON = 1;
- USBCON = (1<.
+
+#include
+#include
+
+// this is not valid C - it's for computing the size available on the chip
+AVR_SIZE: FLASHEND + 1 - BOOTLOADER_SIZE
\ No newline at end of file
diff --git a/tmk_core/rules.mk b/tmk_core/rules.mk
index 53e79ef4..920a7f6a 100644
--- a/tmk_core/rules.mk
+++ b/tmk_core/rules.mk
@@ -216,6 +216,9 @@ MOVE_DEP = mv -f $(patsubst %.o,%.td,$@) $(patsubst %.o,%.d,$@)
elf: $(BUILD_DIR)/$(TARGET).elf
hex: $(BUILD_DIR)/$(TARGET).hex
+cphex: hex
+ $(SILENT) || printf "Copying $(TARGET).hex to qmk_firmware folder" | $(AWK_CMD)
+ $(COPY) $(BUILD_DIR)/$(TARGET).hex $(TARGET).hex && $(PRINT_OK)
eep: $(BUILD_DIR)/$(TARGET).eep
lss: $(BUILD_DIR)/$(TARGET).lss
sym: $(BUILD_DIR)/$(TARGET).sym
@@ -223,19 +226,17 @@ LIBNAME=lib$(TARGET).a
lib: $(LIBNAME)
# Display size of file.
-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
+HEXSIZE = $(SIZE) --target=$(FORMAT) $(BUILD_DIR)/$(TARGET).hex
#ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf
ELFSIZE = $(SIZE) $(BUILD_DIR)/$(TARGET).elf
sizebefore:
- @if test -f $(TARGET).hex; then $(SECHO) $(MSG_SIZE_BEFORE); $(SILENT) || $(HEXSIZE); \
+ @if test -f $(BUILD_DIR)/$(TARGET).hex; then $(SECHO) $(MSG_SIZE_BEFORE); $(SILENT) || $(HEXSIZE); \
2>/dev/null; $(SECHO); fi
sizeafter: $(BUILD_DIR)/$(TARGET).hex
- @if test -f $(TARGET).hex; then $(SECHO); $(SECHO) $(MSG_SIZE_AFTER); $(SILENT) || $(HEXSIZE); \
+ @if test -f $(BUILD_DIR)/$(TARGET).hex; then $(SECHO); $(SECHO) $(MSG_SIZE_AFTER); $(SILENT) || $(HEXSIZE); \
2>/dev/null; $(SECHO); fi
- # test file sizes eventually
- # @if [[ $($(SIZE) --target=$(FORMAT) $(TARGET).hex | $(AWK) 'NR==2 {print "0x"$5}') -gt 0x200 ]]; then $(SECHO) "File is too big!"; fi
# Display compiler version information.
gccversion :
@@ -249,8 +250,6 @@ gccversion :
@if $(AUTOGEN); then \
$(SILENT) || printf "Copying $(TARGET).hex to keymaps/$(KEYMAP)/$(TARGET).hex\n"; \
$(COPY) $@ $(KEYMAP_PATH)/$(TARGET).hex; \
- else \
- $(COPY) $@ $(TARGET).hex; \
fi
%.eep: %.elf
@@ -371,6 +370,14 @@ show_path:
@echo SRC=$(SRC)
@echo OBJ=$(OBJ)
+check-size:
+ $(eval MAX_SIZE=$(shell n=`avr-gcc -E -mmcu=$(MCU) $(CFLAGS) $(OPT_DEFS) tmk_core/common/avr/bootloader_size.c 2> /dev/null | grep -oP "(?<=AVR_SIZE: ).+"`; echo $$(($$n)) || echo 0))
+ $(eval CURRENT_SIZE=$(shell if [ -f $(BUILD_DIR)/$(TARGET).hex ]; then $(SIZE) --target=$(FORMAT) $(BUILD_DIR)/$(TARGET).hex | $(AWK) 'NR==2 {print $$4}'; else printf 0; fi))
+ if [ $(MAX_SIZE) -gt 0 ] && [ $(CURRENT_SIZE) -gt 0 ]; then \
+ $(SILENT) || printf "$(MSG_CHECK_FILESIZE)" | $(AWK_CMD); \
+ if [ $(CURRENT_SIZE) -gt $(MAX_SIZE) ]; then $(PRINT_WARNING_PLAIN); $(SILENT) || printf " * $(MSG_FILE_TOO_BIG)" ; else $(PRINT_OK); $(SILENT) || printf " * $(MSG_FILE_JUST_RIGHT)"; fi \
+ fi
+
# Create build directory
$(shell mkdir -p $(BUILD_DIR) 2>/dev/null)
@@ -385,4 +392,4 @@ $(eval $(foreach OUTPUT,$(OUTPUTS),$(shell mkdir -p $(OUTPUT) 2>/dev/null)))
.PHONY : all finish sizebefore sizeafter qmkversion \
gccversion build elf hex eep lss sym coff extcoff \
clean clean_list debug gdb-config show_path \
-program teensy dfu flip dfu-ee flip-ee dfu-start
+program teensy dfu flip dfu-ee flip-ee dfu-start
\ No newline at end of file
diff --git a/users/drashna/drashna.c b/users/drashna/drashna.c
index 31f58a43..1bf02916 100644
--- a/users/drashna/drashna.c
+++ b/users/drashna/drashna.c
@@ -428,7 +428,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
case KC_MAKE:
if (!record->event.pressed) {
SEND_STRING("make " QMK_KEYBOARD ":" QMK_KEYMAP);
-#ifndef CATERINA_BOOTLOADER
+#ifndef BOOTLOADER_CATERINA
SEND_STRING(":teensy ");
#else
SEND_STRING(" ");
diff --git a/users/drashna/template.c b/users/drashna/template.c
index 027c780e..f377d64f 100644
--- a/users/drashna/template.c
+++ b/users/drashna/template.c
@@ -43,7 +43,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
case KC_MAKE:
if (!record->event.pressed) {
SEND_STRING("make " QMK_KEYBOARD ":" QMK_KEYMAP);
-#ifndef CATERINA_BOOTLOADER
+#ifndef BOOTLOADER_CATERINA
SEND_STRING(":teensy ");
#else
SEND_STRING(" ");