Simplified and polished a bit the code changes on tmk_core

example_keyboards
Luiz Ribeiro 8 years ago
parent 461dfd4462
commit 9ce38cbccf

@ -34,7 +34,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define BACKLIGHT_COLOR 0x110000 #define BACKLIGHT_COLOR 0x110000
#define NO_UART 1 #define NO_UART 1
#define EEPROM_BOOTLOADER_START 1 #define BOOTLOADHID_BOOTLOADER 1
/* key combination for command */ /* key combination for command */
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))

@ -90,8 +90,10 @@ void bootloader_jump(void) {
_delay_ms(5); _delay_ms(5);
#endif #endif
#ifdef EEPROM_BOOTLOADER_START #ifdef BOOTLOADHID_BOOTLOADER
eeprom_write_byte((uint8_t *)EEPROM_BOOTLOADER_START, 0x00); // force bootloadHID to stay in bootloader mode, so that it waits
// for a new firmware to be flashed
eeprom_write_byte((uint8_t *)1, 0x00);
#endif #endif
// watchdog reset // watchdog reset

@ -65,7 +65,6 @@ static uint8_t wdt_timeout = 0;
static void power_down(uint8_t wdto) static void power_down(uint8_t wdto)
{ {
#ifndef __AVR_ATmega32A__
#ifdef PROTOCOL_LUFA #ifdef PROTOCOL_LUFA
if (USB_DeviceState == DEVICE_STATE_Configured) return; if (USB_DeviceState == DEVICE_STATE_Configured) return;
#endif #endif
@ -100,7 +99,6 @@ static void power_down(uint8_t wdto)
// Disable watchdog after sleep // Disable watchdog after sleep
wdt_disable(); wdt_disable();
#endif
} }
#endif #endif

@ -236,6 +236,7 @@ static void print_status(void)
print_val_hex8(host_keyboard_leds()); print_val_hex8(host_keyboard_leds());
#ifndef PROTOCOL_VUSB #ifndef PROTOCOL_VUSB
// these aren't set on the V-USB protocol, so we just ignore them for now
print_val_hex8(keyboard_protocol); print_val_hex8(keyboard_protocol);
print_val_hex8(keyboard_idle); print_val_hex8(keyboard_idle);
#endif #endif

@ -2,7 +2,7 @@ VUSB_DIR = protocol/vusb
OPT_DEFS += -DPROTOCOL_VUSB OPT_DEFS += -DPROTOCOL_VUSB
SRC += $(VUSB_DIR)/main.c \ SRC += $(VUSB_DIR)/main.c \
$(VUSB_DIR)/vusb.c \ $(VUSB_DIR)/vusb.c \
$(VUSB_DIR)/usbdrv/usbdrv.c \ $(VUSB_DIR)/usbdrv/usbdrv.c \
$(VUSB_DIR)/usbdrv/usbdrvasm.S \ $(VUSB_DIR)/usbdrv/usbdrvasm.S \
@ -16,7 +16,7 @@ SRC += $(COMMON_DIR)/sendchar_uart.c \
$(COMMON_DIR)/uart.c $(COMMON_DIR)/uart.c
endif endif
# Search Path # Search Path
#VPATH += $(TMK_PATH)/$(VUSB_DIR)
VPATH += $(TMK_PATH)/$(VUSB_DIR) VPATH += $(TMK_PATH)/$(VUSB_DIR)
VPATH += $(TMK_PATH)/$(VUSB_DIR)/usbdrv VPATH += $(TMK_PATH)/$(VUSB_DIR)/usbdrv

Loading…
Cancel
Save